LKP/0Day reported some building errors about kvm, and errors message
are not always same:
- lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared
(first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’?
- lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use
in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j
is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built
first.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Installed seccomp tests would time out because the "settings" file was
missing. Install both "settings" (needed for proper test execution) and
"config" (needed for informational purposes) with the other test
targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes: 1a940687e4 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 1056d3d2c9 ("selftests: enforce local header dependency in
lib.mk") added header dependency to the rule, but as the rule uses $^,
the headers are added to the compiler command line.
This can cause unexpected precompiled header files being generated when
compilation fails:
$ echo { >> openat2_test.c
$ make
gcc -Wall -O2 -g -fsanitize=address -fsanitize=undefined openat2_test.c
tools/testing/selftests/kselftest_harness.h tools/testing/selftests/kselftest.h helpers.c
-o tools/testing/selftests/openat2/openat2_test
openat2_test.c:313:1: error: expected identifier or ‘(’ before ‘{’ token
313 | {
| ^
make: *** [../lib.mk:140: tools/testing/selftests/openat2/openat2_test] Error 1
$ file openat2_test*
openat2_test: GCC precompiled header (version 014) for C
openat2_test.c: C source, ASCII text
Fix it by filtering out the headers, so that we'll only pass the actual
*.c files in the compiler command line.
Fixes: 1056d3d2c9 ("selftests: enforce local header dependency in lib.mk")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Instead of building a script on the fly (which just repeats the same
thing for each test collection), move the script out of the Makefile and
into run_kselftest.sh, which reads kselftest-list.txt.
Adjust the emit_tests target to report each test on a separate line so
that test running tools (e.g. LAVA) can easily remove individual
tests (for example, as seen in [1]).
[1] 2e7b62155e
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If top make invocation uses -j4 or larger, this patch reduces
"make headers_install" subtask run time from 30 to 7 seconds.
CC: Shuah Khan <shuah@kernel.org>
CC: Shuah Khan <skhan@linuxfoundation.org>
CC: linux-kselftest@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The check if there are any files to install in case of no files
compares "X " with "X" so never false.
Remove extra spaces. It may make sense to use make's $(if) function
here.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Using one shell for the whole recipe with long lists can cause
make[1]: execvp: /bin/sh: Argument list too long
with some shells. Triggered by commit 309b81f0fd ("selftests/bpf:
Install generated test progs")
It requires to change the rule which rely on the one shell
behaviour (run_tests).
Simplify also INSTALL_SINGLE_RULE, remove extra echo, required to
workaround .ONESHELL.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest update Linux 5.7-rc1 consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in the
default TARGETS list in kselftest Makefile. It can be run manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl6Ev30ACgkQCwJExA0N
Qxwl+g//SZ541vt4wL9sK00Xzer5s2EpQBWLB5jfUGm3lD+rQLbeUDUw+7iwNcRP
hCZmB4NkVMBYa1ciBU+L9ax2ZdgGJnbOMqSTFSYI0MqYPH0ghNx6E1XQoaaVfj9X
18VdjORamU9PHHCv6u8s3PNEefUJUsdmbbJWq+CGf98DNxvbapFb+iH7DP/IcDjg
AjopCx9x+dckPAL6NYQbIp9LRPy8giyis92O67I+IMvS8eOFkw6afaHuzR9me2H3
8YJz/JIV9MBDqHyCJswp/SilyRtv917DWPqsvjhMMk/P5NJhhCjfFwnm5t8M2Nu0
xlaz8BA0g+Ofo/y8YIr3oOJO0yTAYq2xHJx83oRPWbg9LK9gAHS6eZeGrqD0nQI8
vhfmP+ej5tXT7yu03YgkY+7192fy0Y094od86qd0RuW47On04A9yF9vSSoRsEmSq
XA7n5ltVB9pqT/+c+Tq3Xeh7/NK/C2MnioAmaEBALXSIwFOUzlguIxpO3Uj1yBhl
rcF0QzO8efGM9jCatJUUxxM6haIsE13ttKoBCFRGavvfSztNlOGr8j558EMUDlPR
t6aaPOOiFj3OdPHb34wIDwaYjiAbCkiOdd/sVJw3fTLEB9dj+cJv/x9BFjijZnLn
zk360qL+jFnHHumeUiEP0UOMXLI9NytYpbeAO7tmfZfQVoInmNQ=
=FsXI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This kselftest update consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in
the default TARGETS list in kselftest Makefile. It can be run
manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes"
* tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests: enforce local header dependency in lib.mk
selftests: Fix memfd to support relocatable build (O=objdir)
selftests: Fix seccomp to support relocatable build (O=objdir)
selftests/harness: Handle timeouts cleanly
selftests/harness: Move test child waiting logic
selftests: android: Fix custom install from skipping test progs
selftests: android: ion: Fix ionmap_test compile error
selftests: Fix kselftest O=objdir build from cluttering top level objdir
selftests/seccomp: Adjust test fixture counts
selftests/ftrace: Fix typo in trigger-multihist.tc
selftests/timens: Remove duplicated include <time.h>
selftests/resctrl: fix spelling mistake "Errror" -> "Error"
selftests/resctrl: Add the test in MAINTAINERS
selftests/resctrl: Disable MBA and MBM tests for AMD
selftests/resctrl: Use cache index3 id for AMD schemata masks
selftests/resctrl: Add vendor detection mechanism
selftests/resctrl: Add Cache Allocation Technology (CAT) selftest
selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest
selftests/resctrl: Add MBA test
selftests/resctrl: Add MBM test
...
Add local header dependency in lib.mk. This enforces the dependency
blindly even when a test doesn't include the file, with the benefit
of a simpler common logic without requiring individual tests to have
special rule for it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
commit 8ce72dc325 ("selftests: fix headers_install circular dependency")
broke bpf build/test workflow. When KBUILD_OUTPUT is set, bpf objects end
up in KBUILD_OUTPUT build directory instead of in ../selftests/bpf.
The following bpf workflow breaks when it can't find the test_verifier:
cd tools/testing/selftests/bpf; make; ./test_verifier;
Fix it to set OUTPUT only when it is undefined in lib.mk. It didn't need
to be set in the first place.
Fixes: 8ce72dc325 ("selftests: fix headers_install circular dependency")
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This changes the selftest output so that each test's output is prefixed
with "# " as a TAP "diagnostic line".
This creates a bit of a kernel-specific TAP dialect where the diagnostics
precede the results. The TAP spec isn't entirely clear about this, though,
so I think it's the correct solution so as to keep interactive runs making
sense. If the output _followed_ the result line in the spec-suggested
YAML form, each test would dump all of its output at once instead of as
it went, making debugging harder.
This does, however, solve the recursive TAP output problem, as sub-tests
will simply be prefixed by "# ". Parsing sub-tests becomes a simple
problem of just removing the first two characters of a given top-level
test's diagnostic output, and parsing the results.
Note that the shell construct needed to both get an exit code from
the first command in a pipe and still filter the pipe (to add the "# "
prefix) uses a POSIX solution rather than the bash "pipefail" option
which is not supported by dash.
Since some test environments may have a very minimal set of utilities
available, the new prefixing code will fall back to doing line-at-a-time
prefixing if perl and/or stdbuf are not available.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This moves the logic for running multiple tests into a single "run_many"
function of runner.sh. Both "run_tests" and "emit_tests" are modified to
use it. Summary handling is now controlled by the "per_test_logging"
shell flag.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reuses the new runner.sh for the emit targets instead of manually
running each test via run_kselftest.sh.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to improve the reusability of the kselftest test running logic,
this extracts the single-test logic from lib.mk into kselftest/runner.sh
which lib.mk can call directly. No changes in output.
As part of the change, this moves the "summary" Makefile logic around
to set a new "logfile" output. This will be used again in the future
"emit_tests" target as well.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"make kselftest" fails with "Circular Makefile.o <- prepare dependency
dropped." error, when lib.mk invokes "make headers_install".
Make level 0: Main make calls selftests run_tests target
...
Make level n: selftests lib.mk invokes main make's headers_install
The secondary level make inherits builtin-rules which will use the rule
to generate Makefile.o and runs into "Circular Makefile.o <- prepare
dependency dropped." error, and kselftest compile fails.
Invoke headers_install target with --no-builtin-rules to avoid circular
error.
In addition, lib.mk installs headers in the default HDR_PATH, even when
build relocation is requested with O= or export KBUILD_OUTPUT. Fix the
problem by passing in INSTALL_HDR_PATH. The headers are installed under
the specified output "dir/usr".
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit b2d35fa5fc ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.
1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
some cases, and STATIC_LIBS in other cases. This makes this framework
confusing to use.
The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.
e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'. Stop.
There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.
Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.
Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.
Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.
Fixes: b2d35fa5fc ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
If the kernel headers aren't installed we can't build all the tests.
Add a new make target rule 'khdr' in the file lib.mk to generate the
kernel headers and that gets include for every test-dir Makefile that
includes lib.mk If the testdir in turn have its own sub-dirs the
top_srcdir needs to be set to the linux-rootdir to be able to generate
the kernel headers.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Pull restartable sequence support from Thomas Gleixner:
"The restartable sequences syscall (finally):
After a lot of back and forth discussion and massive delays caused by
the speculative distraction of maintainers, the core set of
restartable sequences has finally reached a consensus.
It comes with the basic non disputed core implementation along with
support for arm, powerpc and x86 and a full set of selftests
It was exposed to linux-next earlier this week, so it does not fully
comply with the merge window requirements, but there is really no
point to drag it out for yet another cycle"
* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Provide Makefile, scripts, gitignore
rseq/selftests: Provide parametrized tests
rseq/selftests: Provide basic percpu ops test
rseq/selftests: Provide basic test
rseq/selftests: Provide rseq library
selftests/lib.mk: Introduce OVERRIDE_TARGETS
powerpc: Wire up restartable sequences system call
powerpc: Add syscall detection for restartable sequences
powerpc: Add support for restartable sequences
x86: Wire up restartable sequence system call
x86: Add support for restartable sequences
arm: Wire up restartable sequences system call
arm: Add syscall detection for restartable sequences
arm: Add restartable sequences support
rseq: Introduce restartable sequences system call
uapi/headers: Provide types_32_64.h
Similar to what RUN_TESTS does, change EMIT_TESTS to check for execute
bit and emit code to print warnings if test isn't executable to the
the run_kselftest.sh.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
EMIT_TESTS which is the common function that implements run_tests target,
treats all non-zero return codes from tests as failures. When tests are
skipped with non-zero return code, because of unmet dependencies and/or
unsupported configuration, it reports them as failed. This will lead to
too many false negatives even on the tests that couldn't be run.
EMIT_TESTS is changed to test for SKIP=4 return from tests to enable
the framework for individual tests to return special SKIP code.
Tests will be changed as needed to report SKIP instead FAIL/PASS when
they get skipped.
Currently just the test name is printed in the RUN_TESTS output. For
example, when raw_skew sub-test from timers tests in run, the output
shows just raw_skew. Include main test name when printing sub-test
results.
In addition, remove duplicate strings for printing common information with
a new for the test header information.
With this change run_kelftest.sh output for breakpoints test will be:
TAP version 13
Running tests in breakpoints
========================================
selftests: breakpoints: step_after_suspend_test
not ok 1..1 selftests: breakpoints: step_after_suspend_test [SKIP]
selftests: breakpoints: breakpoint_test
ok 1..2 selftests: breakpoints: breakpoint_test [PASS]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Currently just the test name is printed in the RUN_TESTS output. For
example, when raw_skew sub-test from timers tests in run, the output
shows just raw_skew. Include main test name when printing sub-test
results.
In addition, remove duplicate strings for printing common information
with a new for the test header information.
Before the change:
selftests: raw_skew
========================================
WARNING: ADJ_OFFSET in progress, this will cause inaccurate results
Estimating clock drift: -20.616(est) -20.586(act) [OK]
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..7 selftests: raw_skew [PASS]
After the change:
selftests: timers: raw_skew
========================================
WARNING: ADJ_OFFSET in progress, this will cause inaccurate results
Estimating clock drift: -19.794(est) -19.896(act) [OK]
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..7 selftests: timers: raw_skew [PASS]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
RUN_TESTS function has grown and becoming harder to maintain. Move
the code that runs and tests for returns codes to a new function
and call it from RUN_TESTS.
A new RUN_TEST_PRINT_RESULT is created to simplify RUN_TESTS and make it
easier to add handling for other return codes as needed.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
RUN_TESTS which is the common function that implements run_tests target,
treats all non-zero return codes from tests as failures. When tests are
skipped with non-zero return code, because of unmet dependencies and/or
unsupported configuration, it reports them as failed. This will lead to
too many false negatives even on the tests that couldn't be run.
RUN_TESTS is changed to test for SKIP=4 return from tests to enable the
framework for individual tests to return special SKIP code.
Tests will be changed as needed to report SKIP instead FAIL/PASS when
they get skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Refine RUN_TESTS define's output block for summary and non-summary code
to remove duplicate code and make it readable.
cd `dirname $$TEST` > /dev/null; and cd - > /dev/null; are moved
to common code block and indentation fixed.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Within run_tests target, the whole script needs to be executed within
the same shell and not as separate subshells, so the initial test_num
variable set to 0 is still present when executing "test_num=`echo
$$test_num+1 | bc`;".
Demonstration of the issue (make run_tests):
TAP version 13
(standard_in) 1: syntax error
selftests: basic_test
========================================
ok 1.. selftests: basic_test [PASS]
(standard_in) 1: syntax error
selftests: basic_percpu_ops_test
========================================
ok 1.. selftests: basic_percpu_ops_test [PASS]
(standard_in) 1: syntax error
selftests: param_test
========================================
ok 1.. selftests: param_test [PASS]
With fix applied:
TAP version 13
selftests: basic_test
========================================
ok 1..1 selftests: basic_test [PASS]
selftests: basic_percpu_ops_test
========================================
ok 1..2 selftests: basic_percpu_ops_test [PASS]
selftests: param_test
========================================
ok 1..3 selftests: param_test [PASS]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 1f87c7c15d ("selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format")
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: linux-kselftest@vger.kernel.org
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Commit fbcab13d2e ("selftests: silence test output by default")
changed the run_tests logic as well as the logic to generate
run_kselftests.sh to redirect test output away from the console.
As discussed on the list and at kernel summit, this is not a desirable
default as it means in order to debug a failure the console output is
not sufficient, you also need access to the test machine to get the
full test logs. Additionally it's impolite to write directly to
/tmp/$TEST_NAME on shared systems.
The change to the run_tests logic was reverted in commit
a323335e62 ("selftests: lib.mk: print individual test results to
console by default"), and instead a summary option was added so that
quiet output could be requested.
However the change to run_kselftests.sh was left as-is.
This commit applies the same logic to the run_kselftests.sh code, ie.
the script now takes a "--summary" option which suppresses the output,
but shows all output by default.
Additionally instead of writing to /tmp/$TEST_NAME the output is
redirected to the directory where the generated test script is
located.
Fixes: fbcab13d2e ("selftests: silence test output by default")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change run_tests to print individual test results to console by default.
Introduce "summary" option to print individual test results to a file
/tmp/test_name and just print the summary to the console.
This change is necessary to support use-cases where test machines get
rebooted once tests are run and the console log should contain the full
results.
In the following example, individual test results with "summary=1" option
are written to /tmp/kcmp_test
make --silent TARGETS=kcmp kselftest
TAP version 13
selftests: kcmp_test
========================================
pid1: 30126 pid2: 30127 FD: 2 FILES: 2 VM: 1 FS: 2 SIGHAND: 2 IO:
0 SYSVSEM: 0 INV: -1
PASS: 0 returned as expected
PASS: 0 returned as expected
FAIL: 0 expected but -1 returned (Invalid argument)
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Bail out!
Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..1 selftests: kcmp_test [PASS]
make --silent TARGETS=kcmp summary=1 kselftest
TAP version 13
selftests: kcmp_test
========================================
ok 1..1 selftests: kcmp_test [PASS]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For make O=dir run_tests to work, test scripts, test files, and other
dependencies need to be copied over to the object directory. Running
tests from the object directory is necessary to avoid making the source
tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some tests such as sync can't use generic build rules in lib.mk and require
custom rules. Currently there is no provision to allow custom builds and
test such as sync use TEST_PROGS which is reserved for test shell scripts.
Add TEST_CUSTOM_PROGS variable to lib.mk to run and install custom tests
built by individual test make files.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix test executable status check to use full path for make O=dir case,m
when tests are relocated to user specified object directory. Without the
full path, this check fails to find the file and fails the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest and kselftest-clean targets fail when object directory is
specified to relocate objects. Main Makefile make O= path clears the
built-in defines LINK.c, COMPILE.S, LINK.S, and RM that are used in
lib.mk to build and clean targets. Define them.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some of the networking tests are very noisy and make it impossible to
see if we actually passed the tests as they run. Default to suppressing
the output from any tests run in order to make it easier to track what
failed.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change common RUN_TESTS to print messages in user friendly TAP13 format.
This change add TAP13 header at the start of RUN_TESTS target run, and
prints the resulting pass/fail messages with test number information in
the TAP 13 format for each test in the run tests list.
This change covers test scripts as well as test programs. Test programs
have an option to use ksft_ API, however test scripts won't be able to.
With this change, test scripts can print TAP13 format output without any
changes to individual scripts.
Test programs can provide TAP13 format output as needed as some tests
already do. Tests that haven't been converted will benefit from this
change. Tests that are converted benefit from the test counts for all
the tests in each test directory.
Running firmware tests:
make --silent -C tools/testing/selftests/firmware/ run_tests
Before the change:
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
selftests: fw_filesystem.sh [FAIL]
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
selftests: fw_fallback.sh [FAIL]
After the change:
TAP version 13
selftests: fw_filesystem.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
not ok 1..1 selftests: fw_filesystem.sh [FAIL]
selftests: fw_fallback.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
not ok 1..2 selftests: fw_fallback.sh [FAIL]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change lib.mk RUN_TESTS to take test list as an argument. This will
allow it to be called from individual test makefiles to run additional
tests that aren't suitable for a default kselftest run. As an example,
timers test includes destructive tests that aren't included in the
common run_tests target.
Change times/Makefile to use RUN_TESTS call with destructive test list
as an argument instead of using its own RUN_TESTS target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suppress "cd" output from run_tests while running tests to declutter the
test results.
Running efivarfs test:
make --silent -C tools/testing/selftests/efivarfs/ run_tests
Before the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
/lkml/linux-kselftest/tools/testing/selftests/efivarfs
After the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Executing selftests is fragile as if someone forgot to set a secript
as executable the test will fail, and you won't know for sure if the
failure was caused by the lack of proper permissions or something else.
Setting scripts as executable is required, this also enable folks to
execute selftests as independent units.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Define CLEAN macro to allow Makefiles to override common clean target
in lib.mk. This will help fix the following failures:
warning: overriding recipe for target 'clean'
../lib.mk:55: warning: ignoring old recipe for target 'clean'
Fixes: 88baa78d1f ("selftests: remove duplicated all and clean target")
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
In commit a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT"), added
support to generate compile targets in a user specified directory. OUTPUT
variable controls the location which is undefined when tests are built in
the test directory or with "make -C tools/testing/selftests/x86".
make -C tools/testing/selftests/x86/
make: Entering directory '/lkml/linux_4.11/tools/testing/selftests/x86'
Makefile:44: warning: overriding recipe for target 'clean'
../lib.mk:51: warning: ignoring old recipe for target 'clean'
gcc -m64 -o /single_step_syscall_64 -O2 -g -std=gnu99 -pthread -Wall single_step_syscall.c -lrt -ldl
/usr/bin/ld: cannot open output file /single_step_syscall_64: Permission denied
collect2: error: ld returned 1 exit status
Makefile:50: recipe for target '/single_step_syscall_64' failed
make: *** [/single_step_syscall_64] Error 1
make: Leaving directory '/lkml/linux_4.11/tools/testing/selftests/x86'
Same failure with "cd tools/testing/selftests/x86/;make" run.
Fix this with a change to lib.mk to define OUTPUT to be the pwd when
MAKELEVEL is 0. This covers both cases mentioned above.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Both these rules incorrectly use $< (first prerequisite) rather than
$^ (all prerequisites), meaning they don't work if we're using more than
one .S file as input. Switch them to using $^.
They also don't include $(CPPFLAGS) and other variables used in the
default rules, which breaks targets that require those. Fix that by
using the builtin $(COMPILE.S) and $(LINK.S) rules.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Currently we can't build some tests, for example:
$ make -C tools/testing/selftests/ TARGETS=vm
...
gcc -Wall -I ../../../../usr/include -lrt -lpthread ../../../../usr/include/linux/kernel.h userfaultfd.c -o tools/testing/selftests/vm/userfaultfd
/tmp/ccmOkQSM.o: In function `stress':
userfaultfd.c:(.text+0xc60): undefined reference to `pthread_create'
userfaultfd.c:(.text+0xca5): undefined reference to `pthread_create'
userfaultfd.c:(.text+0xcee): undefined reference to `pthread_create'
userfaultfd.c:(.text+0xd30): undefined reference to `pthread_create'
userfaultfd.c:(.text+0xd77): undefined reference to `pthread_join'
userfaultfd.c:(.text+0xe7d): undefined reference to `pthread_join'
userfaultfd.c:(.text+0xe9f): undefined reference to `pthread_cancel'
userfaultfd.c:(.text+0xec6): undefined reference to `pthread_join'
userfaultfd.c:(.text+0xf14): undefined reference to `pthread_join'
/tmp/ccmOkQSM.o: In function `userfaultfd_stress':
userfaultfd.c:(.text+0x13e2): undefined reference to `pthread_attr_setstacksize'
collect2: error: ld returned 1 exit status
This is because the rule for linking .c files to binaries is incorrect.
The first bug is that it uses $< (first prerequisite) instead of $^ (all
preqrequisites), fix it by using ^$.
Secondly the ordering of the prerequisites vs $(LDLIBS) is wrong,
meaning on toolchains that use --as-needed we fail to link (as above).
Fix that by placing $(LDLIBS) *after* ^$.
Finally switch to using the default rule $(LINK.c), so that we get
$(CPPFLAGS) etc. included.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
In commit 88baa78d1f ("selftests: remove duplicated all and clean
target"), the "all" target was removed from individual Makefiles and
added to lib.mk.
However the "all" target was added to lib.mk *after* the existing
"runtests" target. This means "runtests" becomes the first (default)
target for most of our Makefiles.
This has the effect of causing a plain "make" to build *and run* the
tests. Which is at best rude, but depending on which tests are run could
oops someone's build machine.
$ make -C tools/testing/selftests/
...
make[1]: Entering directory 'tools/testing/selftests/bpf'
gcc -Wall -O2 -I../../../../usr/include test_verifier.c -o tools/testing/selftests/bpf/test_verifier
gcc -Wall -O2 -I../../../../usr/include test_maps.c -o tools/testing/selftests/bpf/test_maps
gcc -Wall -O2 -I../../../../usr/include test_lru_map.c -o tools/testing/selftests/bpf/test_lru_map
#0 add+sub+mul FAIL
Failed to load prog 'Function not implemented'!
#1 unreachable FAIL
Unexpected error message!
#2 unreachable2 FAIL
...
Fix it by moving the "all" target to the start of lib.mk, making it the
default target.
Fixes: 88baa78d1f ("selftests: remove duplicated all and clean target")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OUTPUT.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some testcases need the clean extra data after running. This patch
introduce the "EXTRA_CLEAN" variable to address this requirement.
After KBUILD_OUTPUT is enabled in later patch, it will be easy to
decide to if we need do the cleanup in the KBUILD_OUTPUT path(if the
testcase ran immediately after compiled).
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Li Zhijian