Given that rnbd_srv_sess_dev already has an open_flags member, there
is no need for the rnbd_dev indirection as a simple block_device pointer
works just as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220909131509.3263924-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These can be trivially open coded in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220909131509.3263924-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold rnbd_endio into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220909131509.3263924-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all the wrappers and just get the information directly from
the block device, or where no such helpers exist the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220909131509.3263924-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
w_start_resync has been removed since
commit ac0acb9e39 ("drbd: use drbd_device_post_work()
in more places"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It doesn't make sense for us to retry to compress an uncompressible page
(comp_len == PAGE_SIZE) in zsmalloc slowpath, because we will be storing
it uncompressed anyway. We can avoid wasting time on another compression
attempt. It is enough to take lock (zcomp_stream_get) and execute the
code below.
Link: https://lkml.kernel.org/r/20220824113117.78849-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do all reset operations under write lock, so we don't need to save
->disksize and ->comp to stack variables. Another thing is that ->comp is
freed during zram reset, but comp pointer is not NULL-ed, so zram keeps
the freed pointer value.
Link: https://lkml.kernel.org/r/20220824035100.971816-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().
Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is not necessary since it is set later just before function
return success.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220902100055.25724-4-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the return type to void given it always returns 0.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220902100055.25724-3-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's add some explanations here given the err handling is not obvious.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220902100055.25724-2-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYxNpQQAKCRCAXGG7T9hj
vgO9AQChV9kknjgoL9qWJe25nNHyQ4zNfgtUNLefamYOAr93HgEAiFv7SIwMshFb
jl4oceI76z2u6APkZlySR2JcJa+B+go=
=BtBW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a minor fix for the Xen grant driver
- a small series fixing a recently introduced problem in the Xen
blkfront/blkback drivers with negotiation of feature usage
* tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
xen-blkfront: Cache feature_persistent value before advertisement
xen-blkfront: Advertise feature-persistent as user requested
xen-blkback: Advertise feature-persistent as user requested
Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront. Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.
Commit 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise. Therefore blkfront advertises
without reading the parameter. As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.
This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.
Fixes: 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
74a852479c ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Since process_{read,write} already prints direction info if ctx->ops.rdma_ev
fails, no need to pass 'dir'.
Link: https://lore.kernel.org/r/20220826081117.21687-1-guoqing.jiang@linux.dev
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=qR5N
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- Fix for clustered raid (Guoqing Jiang)
- req_op fix (Bart Van Assche)
- Fix race condition in raid recreate (David Sloan)
- loop configuration overflow fix (Siddh)
- Fix missing commit_rqs call for certain conditions (Yu)
* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
loop: Check for overflow while configuring loop
blk-mq: fix io hung due to missing commit_rqs
Return the value from rtrs_clt_rdma_cq_direct() directly instead of
storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220824075213.221397-1-ye.xingchen@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.
loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h).
The function directly copies offset from info to the device as
follows (See line 980 of loop.c):
lo->lo_offset = info->lo_offset;
This results in an overflow, which triggers a warning in iomap_iter()
due to a call to iomap_iter_done() which has:
WARN_ON_ONCE(iter->iomap.offset > iter->pos);
Thus, check for negative value during loop_set_status_from_info().
Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e
Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
remainder fix up the changes which went into this -rc cycle.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYwQZcgAKCRDdBJ7gKXxA
jnCxAQCk8L6PPm0L2KvKr5Vu3M/T0o9SvfxfM5yho80zM68fHQD/eLxz+nd3m+N5
K7Mdbcb2u6F46qQaS+S5RialEWKpsw8=
=WtBo
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen fixes, almost all for MM.
Seven of these are cc:stable and the remainder fix up the changes
which went into this -rc cycle"
* tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kprobes: don't call disarm_kprobe() for disabled kprobes
mm/shmem: shmem_replace_page() remember NR_SHMEM
mm/shmem: tmpfs fallocate use file_modified()
mm/shmem: fix chattr fsflags support in tmpfs
mm/hugetlb: support write-faults in shared mappings
mm/hugetlb: fix hugetlb not supporting softdirty tracking
mm/uffd: reset write protection when unregister with wp-mode
mm/smaps: don't access young/dirty bit if pte unpresent
mm: add DEVICE_ZONE to FOR_ALL_ZONES
kernel/sys_ni: add compat entry for fadvise64_64
mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
Revert "zram: remove double compression logic"
get_maintainer: add Alan to .get_maintainer.ignore
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning -EINVAL if an internal inconsistency is detected,
fall back to a single submission queue. This patch prepares for changing
the return value of the .map_queues() callbacks into void.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220815170043.19489-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add event tracing mechanism for following routines:
- create_sess()
- destroy_sess()
- process_rdma()
- process_msg_sess_info()
- process_msg_open()
- process_msg_close()
How to use:
1. Load the rnbd_server module
2. cd /sys/kernel/debug/tracing
3. If all the events need to be enabled:
echo 1 > events/rnbd_srv/enable
4. OR only speific routine/event needs to be enabled e.g.
echo 1 > events/rnbd_srv/create_sess/enable
5. cat trace
5. Run some workload which can trigger create_sess() routine/event
Signed-off-by: Santosh Pradhan <santosh.pradhan@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220818105551.110490-2-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit e7be8d1dd9 ("zram: remove double compression
logic") as it causes zram failures. It does not revert cleanly, PTR_ERR
handling was introduced in the meantime. This is handled by appropriate
IS_ERR.
When under memory pressure, zs_malloc() can fail. Before the above
commit, the allocation was retried with direct reclaim enabled (GFP_NOIO).
After the commit, it is not -- only __GFP_KSWAPD_RECLAIM is tried.
So when the failure occurs under memory pressure, the overlaying
filesystem such as ext2 (mounted by ext4 module in this case) can emit
failures, making the (file)system unusable:
EXT4-fs warning (device zram0): ext4_end_bio:343: I/O error 10 writing to inode 16386 starting block 159744)
Buffer I/O error on device zram0, logical block 159744
With direct reclaim, memory is really reclaimed and allocation succeeds,
eventually. In the worst case, the oom killer is invoked, which is proper
outcome if user sets up zram too large (in comparison to available RAM).
This very diff doesn't apply to 5.19 (stable) cleanly (see PTR_ERR note
above). Use revert of e7be8d1dd9 directly.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1202203
Link: https://lkml.kernel.org/r/20220810070609.14402-1-jslaby@suse.cz
Fixes: e7be8d1dd9 ("zram: remove double compression logic")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: <stable@vger.kernel.org> [5.19]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=y2HE
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
In ublk_queue_rq(), Assume current request is a re-issued request aborted
previously in monitor_work because the ubq_daemon(ioucmd's task) is
PF_EXITING. For this request, we cannot call
io_uring_cmd_complete_in_task() anymore because at that moment io_uring
context may be freed in case that no inflight ioucmd exists. Otherwise,
we may cause null-deref in ctx->fallback_work.
Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This
check is safe and makes sense.
Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request
(releasing the tag). Then the request is restarted(allocating the tag)
and we are here. Since releasing/allocating a tag implies smp_mb(),
finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request
aborted previously.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since __ublk_rq_task_work always fails requests immediately during
exiting, __ublk_fail_req() is only called from abort context during
exiting. So lock is unnecessary.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace direct check on PF_EXITING in __ublk_rq_task_work() by the
existing wrapper. Also inline ubq_daemon_is_dying().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220815023633.259825-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYvi0yQAKCRCAXGG7T9hj
vmikAQDWSrcWuxDkGnzut0A1tBQRUCWDMyKPqigWAA5tH2sPgAEAtWfBvT1xyl7T
gZ22I7o21WxxDGyvNUcA65pK7c2cpg8=
=UMbq
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
If ublksrv sends UBLK_IO_NEED_GET_DATA with new allocated io buffer, we
have to update iod->addr in task_work before calling io_uring_cmd_done().
Then usersapce target can handle (write)io request with the new io
buffer reading from updated iod.
Without this change, userspace target may touch a wrong io buffer!
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220810055212.66417-1-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Persistent grants feature can be used only when both backend and the
frontend supports the feature. The feature was always supported by
'blkback', but commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has introduced a parameter for
disabling it runtime.
To avoid the parameter be updated while being used by 'blkback', the
commit caches the parameter into 'vbd->feature_gnt_persistent' in
'xen_vbd_create()', and then check if the guest also supports the
feature and finally updates the field in 'connect_ring()'.
However, 'connect_ring()' could be called before 'xen_vbd_create()', so
later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to
'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use
'persistent grants' feature even if the guest doesn't support the
feature.
This commit fixes the issue by moving the parameter value caching to
'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct
embeds 'vbd' object, which will be used by 'connect_ring()' later, this
should be called before 'connect_ring()' and therefore this should be
the right and safe place to do the caching.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Luis and others, almost exclusively in the filesystem. Several patches
touch files outside of our normal purview to set the stage for bringing
in Jeff's long awaited ceph+fscrypt series in the near future. All of
them have appropriate acks and sat in linux-next for a while.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmL1HF8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwOuB/97JKHFuOlP1HrD6fYe5a0ul9zC9VG4
57XPDNqG2PSmfXCjvZhyVU4n53sUlJTqzKDSTXydoPCMQjtyHvysA6gEvcgUJFPd
PHaZDCd9TmqX8my67NiTK70RVpNR9BujJMVMbOfM+aaisl0K6WQbitO+BfhEiJcK
QStdKm5lPyf02ESH9jF+Ga0DpokARaLbtDFH7975owxske6gWuoPBCJNrkMooKiX
LjgEmNgH1F/sJSZXftmKdlw9DtGBFaLQBdfbfSB5oVPRb7chI7xBeraNr6Od3rls
o4davbFkcsOr+s6LJPDH2BJobmOg+HoMoma7ezspF7ZqBF4Uipv5j3VC
=1427
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
UBLK_IO_NEED_GET_DATA is one ublk IO command. It is designed for a user
application who wants to allocate IO buffer and set IO buffer address
only after it receives an IO request from ublksrv. This is a reasonable
scenario because these users may use a RPC framework as one IO backend
to handle IO requests passed from ublksrv. And a RPC framework may
allocate its own buffer(or memory pool).
This new feature (UBLK_F_NEED_GET_DATA) is optional for ublk users.
Related userspace code has been added in ublksrv[1] as one pull request.
Test cases for this feature are added in ublksrv and all the tests pass.
The performance result shows that this new feature does bring additional
latency because one IO is issued back to ublk_drv once again to copy data
from bio vectors to user-provided data buffer. UBLK_IO_NEED_GET_DATA is
suitable for bigger block size such as 512B or 1MB.
[1] https://github.com/ming1/ubdsrv
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/3a21007ea1be8304246e654cebbd581ab0012623.1659011443.git.ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all block device related info from ublksrv_ctrl_dev_info,
meantime reduce its size into 64 bytes because:
1) ublksrv_ctrl_dev_info becomes cleaner without including any
block related info
2) generic set/get parameter command can be used to set block
related setting easily and cleanly
3) generic set/get parameter command can be used for extending
ublk without needing more info in ublksrv_ctrl_dev_info
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two commands to set/get parameters generically.
One important goal of ublk is to provide generic framework for making
block device by userspace flexibly.
As one generic block device, there are still lots of block parameters,
such as max_sectors, write_cache/fua, discard related limits,
zoned parameters, ...., so this patch starts to add generic mechanism
for set/get device parameters.
Both generic block parameters(all kinds of queue settings) and ublk
feature parameters can be covered with this way, then it becomes quite
easy to extend in future.
Add two parameter types are used so far: basic(covers basic queue setting
and misc settings which can't be grouped easily) and discard, basic type
must be set, and discard type becomes optional now
This way provides mechanism to simulate any kind of generic block device
from userspace easily, from both block queue setting viewpoint or ublk
feature viewpoint.
The style of putting all parameters together is suggested by Christoph.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->free_disk is only called after disk is added successfully, so
drop ublk device reference in case of add_disk() failure.
Fixes: 6d9e6dfdf3 ("ublk: defer disk allocation")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each ublk queue is started before adding disk, we have to cancel queues in
ublk_stop_dev() so that ubq daemon can be exited, otherwise DEL_DEV command
may hang forever.
Also avoid to cancel queues two times by checking if queue is ready,
otherwise use-after-free on io_uring may be triggered because ublk_stop_dev
is called by ublk_remove() too.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220730092750.1118167-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver is for fairly obscure hardware, and has only seen random
drive-by changes after the maintainer stopped working on it in 2005
(about a year and a half after it was introduced). It has some
"interesting" block layer interactions, so let's just drop it unless
anyone complains.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220721064102.1715460-1-hch@lst.de
[axboe: fix date typo, it was in 2005, not 2015]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 1243172d58 ("nbd: use pr_err to output error message") tries
to define pr_fmt and use short pr_err() to output error message,
however, the definition is missed.
This patch also remove existing "nbd:" inside pr_err().
Fixes: 1243172d58 ("nbd: use pr_err to output error message")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220723082427.3890655-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There needs to be some error checking if ida_simple_get() fails.
Also call ida_free() if there are errors later.
Fixes: 94bc02e30f ("nullb: use ida to manage index")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow setting via configfs these two options:
no_sched
shared_tag_bitmap
Previously these could only be activated as module parameters.
Still missing are:
shared_tags
timeout
requeue
init_hctx
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220708174943.87787-3-vincent.fu@samsung.com
[axboe: fold in nullb == NULL fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add as module parameters these options:
memory_backed
discard
mbps
cache_size
Previously these could only be set via configfs.
Still missing is bad_blocks.
The kernel test robot found a documentation formatting issue in v1 of
this patch.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20220708174943.87787-2-vincent.fu@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The structure rnbd_srv_session maintains a list and an xarray of
rnbd_srv_dev. There is no need to keep both as one of them can serve the
purpose.
Since one of the places where the lookup of rnbd_srv_dev using
rnbd_srv_session is IO path, an xarray would serve us better than a list
traversal. Hence remove sess_dev_list from rnbd_srv_session, and replace
its uses from xarray.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220707143122.460362-3-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After setting keep_id if the mutex trylock fails, the keep_id stays set
for the rest of the sess_dev lifetime.
Therefore, set keep_id to true after mutex_trylock succeeds, so that a
failure of trylock does'nt touch keep_id.
Fixes: b168e1d85c ("block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel")
Cc: gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220707143122.460362-2-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's change the parameter type to 'sector_t' then we don't need to cast
it from rnbd_clt_resize_dev_store, and update rnbd_clt_resize_disk too.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-8-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, process_msg_open_rsp checks if capacity changed or not before
call rnbd_clt_change_capacity while the checking also make sense for
rnbd_clt_resize_dev_store, let's move the checking into the function.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-7-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While at it, let re-arrange the struct to remove holes.
Before, pahole reports
/* size: 232, cachelines: 4, members: 17 */
/* sum members: 224, holes: 2, sum holes: 8 */
/* last cacheline: 40 bytes */
After the change, the report changes to
/* size: 224, cachelines: 4, members: 17 */
/* last cacheline: 32 bytes */
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-6-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, both map and remap trigger rnbd_clt_set_dev_attr to set
some members in rnbd_clt_dev such as wc, fua and logical_block_size
etc, but those members are only useful for map scenario given the
setup_request_queue is only called from the path:
rnbd_clt_map_device -> rnbd_client_setup_device
Since rnbd_clt_map_device frees rsp after rnbd_client_setup_device,
we can pass rsp to rnbd_client_setup_device and it's callees, which
means queue's attributes can be set directly from relevant members
of rsp instead from rnbd_clt_dev.
After that, we can kill 11 members from rnbd_clt_dev, and we don't
need rnbd_clt_set_dev_attr either.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-5-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The member is not needed since we can call get_disk_ro to achieve the
same goal.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-4-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For map scenario, rsp is freed in two places:
1. msg_open_conf frees rsp if rtrs_clt_request returns 0.
2. Otherwise, rsp is freed by the call sites of rtrs_clt_request.
Now, We'd like to control full lifecycle of rsp in rnbd_clt_map_device,
with that, it is feasible to pass rsp to rnbd_client_setup_device in
next commit.
For 1, it is possible to free rsp from the caller of send_usr_msg
because of the synchronization of iu->comp.wait. And we put iu later
in rnbd_clt_map_device to ensure order of release rsp and iu.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-3-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's open code it in rnbd_clt_map_device, then we can use information
from rsp to setup gendisk and request_queue in next commits. After that,
we can remove some members (wc, fua and max_hw_sectors etc) from struct
rnbd_clt_dev.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-2-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We usually do all our bitmap IO in units of PAGE_SIZE.
With very small or oddly sized external meta data, or with
PAGE_SIZE != 4k, it can happen that our last on-disk bitmap page
is not fully PAGE_SIZE aligned, so we may need to adjust the size
of the IO.
We used to do that with
min_t(unsigned int, PAGE_SIZE,
last_allowed_sector - current_offset);
And for just the right diff, (unsigned int)(diff) will result in 0.
A bio of length 0 will correctly be rejected with an IO error
(and some scary WARN_ON_ONCE()) by the scsi layer.
Do the calculation properly.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220622204932.196830-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
zs_malloc returns 0 if it fails. zs_zpool_malloc will return -1 when
zs_malloc return 0. But -1 makes the return value unclear.
For example, when zswap_frontswap_store calls zs_malloc through
zs_zpool_malloc, it will return -1 to its caller. The other return value
is -EINVAL, -ENODEV or something else.
This commit changes zs_malloc to return ERR_PTR on failure. It didn't
just let zs_zpool_malloc return -ENOMEM becaue zs_malloc has two types of
failure:
- size is not OK return -EINVAL
- memory alloc fail return -ENOMEM.
Link: https://lkml.kernel.org/r/20220714080757.12161-1-teawater@gmail.com
Signed-off-by: Hui Zhu <teawater@antgroup.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test/clear_bit() functions take a bit number, but this code is
passing as shifted value. It's the equivalent of saying BIT(BIT(0))
instead of just BIT(0).
This doesn't affect runtime because numbers are small and it's done
consistently.
Fixes: fa36204556 ("ublk: simplify ublk_ch_open and ublk_ch_release")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Yt/2R/+MJf/MSoyl@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Userspace may support more features or new added flags, but the driver
side can be old, so make sure correct flags(features) returned to
userpsace, then userspace can work as expected.
Also mark the 2nd flags as reversed, just use the 1st one. When we run
out of flags, the reserved one can be handled at that time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__ublk_destroy_dev() is called for handling error in ublk_add_dev(),
but either tagset isn't allocated or mutex isn't initialized.
So fix the issue by letting replacing ublk_add_dev with a
ublk_add_tag_set function that is much more limited in scope and
instead unwind every single step directly in ublk_ctrl_add_dev.
To allow for this refactor the device freeing so that there is
a helper for freeing the device number instead of coupling that
with freeing the mutex and the memory.
Note that this now copies the dev_info to userspace before adding
the character device. This not only simplifies the erro handling
in ublk_ctrl_add_dev, but also means that the character device
can only be seen by userspace if the device addition succeeded.
Based on a patch from Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Defer allocating the gendisk and request_queue until UBLK_CMD_START_DEV
is called. This avoids funky life times where a disk is allocated
and then can be added and removed multiple times, which has never been
supported by the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Looking at the hctxs and cpumap is not safe without at very last a RCU
reference. It also requires the queue to be set up before starting the
device, which leads to rather awkward life time rules.
Instead rewrite ublk_ctrl_get_queue_affinity to just build the cpumask
directly from the mq_map in the tag set, similar to hctx->cpumask is
built.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold __ublk_create_dev into its only caller to avoid the packing and
unpacking of the return value into an ERR_PTR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all per-command work into the per-command ublk_ctrl_* helpers
instead of being split over those, ublk_ctrl_cmd_validate, and the main
ublk_ctrl_uring_cmd handler. To facilitate that, the old
ublk_ctrl_stop_dev function that just contained two function calls is
folded into both callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fops->open and fops->release are always paired. Use simple atomic bit
ops ot indicate if the device is opened instead of a count that can
only be 0 and 1 and a useless cmpxchg loop in ublk_ch_release.
Also don't bother clearing file->private_data is the file is about to
be freed anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to define empty versions, they can just be left out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_PREFLUSH is turned into REQ_OP_FLUSH by the flush state machine
and thus never seen by a blk-mq based driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ublk protocol has no mechanism to actually transfer the integrity
metadata, so don't define this flag, which requires that an integrity
payload is attached to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220718063013.335531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eliminate the following coccicheck warnings:
./drivers/block/ublk_drv.c:1467:2-3: Unneeded semicolon
./drivers/block/ublk_drv.c:1528:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220718015431.40185-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blk_mq_init_queue() fails, it should return error code in ublk_add_dev()
Fixes: cebbe577cb ("ublk_drv: fix request queue leak")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220718042408.3132835-1-yangyingliang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drivers/block/zram/zram_drv.c:55:45: warning: 'zram_wb_devops' defined but not used [-Wunused-const-variable=]
Fix the above warning if CONFIG_ZRAM_WRITEBACK not enabled.
Link: https://lkml.kernel.org/r/20220608072534.68850-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After applying -Wmaybe-uninitialized manually, two build warnings are
triggered:
drivers/block/ublk_drv.c:940:11: warning: ‘io’ may be used uninitialized [-Wmaybe-uninitialized]
940 | io->flags &= ~UBLK_IO_FLAG_ACTIVE;
drivers/block/ublk_drv.c: In function ‘ublk_ctrl_uring_cmd’:
drivers/block/ublk_drv.c:1531:9: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
Fix the 1st one by removing 'io->flags &= ~UBLK_IO_FLAG_ACTIVE;' which
isn't needed since the function always return successfully after setting
this flag.
Fix the 2nd one by always initializing 'ret'.
Also fix another sparse warning of 'sparse: sparse: incorrect type in return
expression' by changing return type of ublk_setup_iod().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220716095344.222674-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type where
appropriate.
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-19-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for request
operations and the new blk_opf_t type for request flags.
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-18-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type to represent
the combination of a request and request flags.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-17-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the type of request.cmd_flags has been changed from u32 into
blk_opf_t, use the __force keyword when casting to an integer type to
prevent that sparse warns about this cast.
Cc: Denis Efremov <efremov@linux.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-16-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the drbd_submit_peer_request() 'op' and 'op_flags' arguments
into a single argument. This patch does not change any functionality.
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-15-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-14-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for a
function argument that represents a request operation.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-13-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by changing the type of the value returned by
req_op() and bio_op() from unsigned int into enum req_op. Insert
'default: break;' in switch statements on the enum req_op type to prevent
that the compiler warns about these switch statements.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All .rw_page() callers pass an enum req_op value as last argument. Make
this explicit by changing the type of the last argument into enum req_op.
See also commit 3f289dcb4b ("block: make bdev_ops->rw_page() take a
REQ_OP instead of bool").
Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just print the block device name directly using the %pg format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call blk_cleanup_queue() in release code path for fixing request
queue leak.
Also for-5.20/block has cleaned up blk_cleanup_queue(), which is
basically merged to del_gendisk() if blk_mq_alloc_disk() is used
for allocating disk and queue.
However, ublk may not add disk in case of starting device failure, then
del_gendisk() won't be called when removing ublk device, so blk_mq_exit_queue
will not be callsed, and it can be bit hard to deal with this kind of
merge conflict.
Turns out ublk's queue/disk use model is very similar with scsi, so switch
to scsi's model by allocating disk and queue independently, then it can be
quite easy to handle v5.20 merge conflict by replacing blk_cleanup_queue
with blk_mq_destroy_queue.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220714103201.131648-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use task_work_add if it is available, since task_work_add can bring
up better performance, especially batching signaling ->ubq_daemon can
be done.
It is observed that task_work_add() can boost iops by +4% on random
4k io test. Also except for completing io command, all other code
paths are same with completing io command via
io_uring_cmd_complete_in_task.
Meantime add one flag of UBLK_F_URING_CMD_COMP_IN_TASK for comparing
the mode easily.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the driver part of userspace block driver(ublk driver), the other
part is userspace daemon part(ublksrv)[1].
The two parts communicate by io_uring's IORING_OP_URING_CMD with one
shared cmd buffer for storing io command, and the buffer is read only for
ublksrv, each io command is indexed by io request tag directly, and is
written by ublk driver.
For example, when one READ io request is submitted to ublk block driver,
ublk driver stores the io command into cmd buffer first, then completes
one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued
to ublk driver beforehand by ublksrv for getting notification of any new
io request, and each URING_CMD is associated with one io request by tag.
After ublksrv gets the io command, it translates and handles the ublk io
request, such as, for the ublk-loop target, ublksrv translates the request
into same request on another file or disk, like the kernel loop block
driver. In ublksrv's implementation, the io is still handled by io_uring,
and share same ring with IORING_OP_URING_CMD command. When the target io
request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
both committing io request result and getting future notification of new
io request.
Another thing done by ublk driver is to copy data between kernel io
request and ublksrv's io buffer:
1) before ubsrv handles WRITE request, copy the request's data into
ublksrv's userspace io buffer, so that ublksrv can handle the write
request
2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
into this READ request, then ublk driver can complete the READ request
Zero copy may be switched if mm is ready to support it.
ublk driver doesn't handle any logic of the specific user space driver,
so it is small/simple enough.
[1] ublksrv
https://github.com/ming1/ubdsrv
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device instead of a request_queue as that is what most
callers have at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter
function so it may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always use crypto_has_comp() so that crypto can lookup module, call
usermodhelper to load the modules, wait for usermodhelper to finish and so
on. Otherwise crypto will do all of these steps under CPU hot-plug lock
and this looks like too much stuff to handle under the CPU hot-plug lock.
Besides this can end up in a deadlock when usermodhelper triggers a code
path that attempts to lock the CPU hot-plug lock, that zram already holds.
An example of such deadlock:
- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto
and waits for modprobe to finish
disksize_store
zcomp_create
__cpuhp_state_add_instance
__cpuhp_state_add_instance_cpuslocked
zcomp_cpu_up_prepare
crypto_alloc_base
crypto_alg_mod_lookup
call_usermodehelper_exec
wait_for_completion_killable
do_wait_for_common
schedule
- path B. async work kthread that brings in scsi device. It wants to
register CPUHP states at some point, and it needs the CPU hot-plug
lock for that, which is owned by zram.
async_run_entry_fn
scsi_probe_and_add_lun
scsi_mq_alloc_queue
blk_mq_init_queue
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
__cpuhp_state_add_instance
__cpuhp_state_add_instance_cpuslocked
mutex_lock
schedule
- path C. modprobe sleeps, waiting for all aync works to finish.
load_module
do_init_module
async_synchronize_full
async_synchronize_cookie_domain
schedule
[senozhatsky@chromium.org: add comment]
Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants. This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-26365, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to mark a surpise removal, remove the gendisk as
soon as possible when removing the device and implement the ->free_disk
callback to ensure the private data is alive as long as the gendisk has
references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This file is a huge mess that iterates over all devices and is in the
way of fixing the device removal in this driver, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYprzPAAKCRCAXGG7T9hj
vuTzAQC4GiDXcD/cfLVcEqdyw1diCWZjuOfuznUqy5ZUBAZjvAD/draFHTeO96+k
qyZyzFggPIziaAOIUZ2DkJ/NqSAmbA8=
=dl1E
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
-----BEGIN PGP SIGNATURE-----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=YqhC
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
-----BEGIN PGP SIGNATURE-----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=lBeb
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block
Pull block request execute cleanups from Jens Axboe:
"This change was advertised in the initial core block pull request, but
didn't actually make that branch as we deferred it to a post-merge
pull request to avoid a bunch of cross branch issues.
This series cleans up the block execute path quite nicely"
* tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block:
blk-mq: remove the done argument to blk_execute_rq_nowait
blk-mq: avoid a mess of casts for blk_end_sync_rq
blk-mq: remove __blk_execute_rq_nowait
mac vlan filter and stats support in mlx5 vdpa
irq hardening in virtio
performance improvements in virtio crypto
polling i/o support in virtio blk
ASID support in vhost
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKXBEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9pgIAJKdLbtrqDdDrPJRg5Xs2wsWMbGnXbKxm71Q
kGPfnkn15yjwiMJcdNO8O16qP5VGUzBWPhGc3X7U9KRU4EI2yEGLFv9hwRvdlY9h
4C7O4fBWTbuqTT6pwwAH9vT3/b6q8bMh4D3uD2P1zSwh8POqHm1kyRivXPPr4PUA
5TAc04EGcrFQpC9co3v8UmJ7EjLa/tgdUb7igTv5VHi7K2GNGMycSvHP/v7CFgZ6
paVYThMCrWOJkIIk8k6qhMKhAxkQ7lBrqhLBtfX9jyadLmq5hAQQu2D43PoZb2ed
IbNN/g5Sv9yaL7ERYzTRAEfuXVGPiDLWli2C5sHdz2IJDBeqQeU=
=Vlh6
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio and vdpa features, fixes, and cleanups:
- mac vlan filter and stats support in mlx5 vdpa
- irq hardening in virtio
- performance improvements in virtio crypto
- polling i/o support in virtio blk
- ASID support in vhost
- fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa: ifcvf: set pci driver data in probe
vdpa/mlx5: Add RX MAC VLAN filter support
vdpa/mlx5: Remove flow counter from steering
vhost: rename vhost_work_dev_flush
vhost-test: drop flush after vhost_dev_cleanup
vhost-scsi: drop flush after vhost_dev_cleanup
vhost_vsock: simplify vhost_vsock_flush()
vhost_test: remove vhost_test_flush_vq()
vhost_net: get rid of vhost_net_flush_vq() and extra flush calls
vhost: flush dev once during vhost_dev_stop
vhost: get rid of vhost_poll_flush() wrapper
vhost-vdpa: return -EFAULT on copy_to_user() failure
vdpasim: Off by one in vdpasim_set_group_asid()
virtio: Directly use ida_alloc()/free()
virtio: use WARN_ON() to warning illegal status value
virtio: harden vring IRQ
virtio: allow to unbreak virtqueue
virtio-ccw: implement synchronize_cbs()
virtio-mmio: implement synchronize_cbs()
virtio-pci: implement synchronize_cbs()
...
nothing in particular standing out, except perhaps that the fact that
the MDS never really maintained atime was made official and thus it's
no longer updated on the client either.
We also have a MAINTAINERS update: Jeff is transitioning his filesystem
maintainership duties to Xiubo.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmKYs1wTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+PvCACIj47W4FapO672xcIkQ4920ZT1Jw/o
2BfKXUtNyVLpGgBlweJWSTd1tfXp0tl9MFg00t/zbVarHH0SGAgF1z6e/tM7rjA/
vyCkFQXJDuwB0kCbCtZ9xt5XIQkkvPPJOmyLSKYl7RqImch7pTRd5IwxgKGWqXDx
FraVXqFqvr8L+szV/JCopdxdMVTFixWRD48z5pPlOReaOXiGjtTMoFIBIPp7GqVL
UB7wyOtDmyzcGnUsRNqMQFrkUBsBW1IEDKf/yVtQNDjUxmr3uXm8vugeISpMOGBO
cCkZACDeO0lpgHrXSo4UCf46bg3/HujxZu0nTc9HqPDiFdOmKmf58N4n
=MAi2
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A big pile of assorted fixes and improvements for the filesystem with
nothing in particular standing out, except perhaps that the fact that
the MDS never really maintained atime was made official and thus it's
no longer updated on the client either.
We also have a MAINTAINERS update: Jeff is transitioning his
filesystem maintainership duties to Xiubo"
* tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits)
MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer"
ceph: fix decoding of client session messages flags
ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE
ceph: remove redundant variable ino
ceph: try to queue a writeback if revoking fails
ceph: fix statfs for subdir mounts
ceph: fix possible deadlock when holding Fwb to get inline_data
ceph: redirty the page for writepage on failure
ceph: try to choose the auth MDS if possible for getattr
ceph: disable updating the atime since cephfs won't maintain it
ceph: flush the mdlog for filesystem sync
ceph: rename unsafe_request_wait()
libceph: use swap() macro instead of taking tmp variable
ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check
ceph: no need to invalidate the fscache twice
ceph: replace usage of found with dedicated list iterator variable
ceph: use dedicated list iterator variable
ceph: update the dlease for the hashed dentry when removing
ceph: stop retrying the request when exceeding 256 times
ceph: stop forwarding the request when exceeding 256 times
...
The bio and rq fields of struct nullb_cmd are now overlapping in a
union. So we cannot use a test on ->bio being non-NULL to detect the
NULL_Q_BIO queue mode. null_zone_write() use such broken test to set the
sector position of a zone append write in the command bio or request.
When the null_blk device uses the NULL_Q_MQ queue mode,
null_zone_write() wrongly end up setting the bio sector position,
resulting in the command request to be broken and random crashes
following.
Fix this by testing the device queue mode directly.
Fixes: 8ba816b23a ("null-blk: save memory footprint for struct nullb_cmd")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220602120344.1365329-1-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch supports mq_ops->queue_rqs() hook. It has an advantage of
batch submission to virtio-blk driver. It also helps polling I/O because
polling uses batched completion of block layer. Batch submission in
queue_rqs() can boost polling performance.
In queue_rqs(), it iterates plug->mq_list, collects requests that
belong to same HW queue until it encounters a request from other
HW queue or sees the end of the list.
Then, virtio-blk adds requests into virtqueue and kicks virtqueue
to submit requests.
If there is an error, it inserts error request to requeue_list and
passes it to ordinary block layer path.
For verification, I did fio test.
(io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N)
I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times.
It shows about 2% improvement.
| numjobs=2 | numjobs=4
-----------------------------------------------------------
fio without queue_rqs() | 291K IOPS | 238K IOPS
-----------------------------------------------------------
fio with queue_rqs() | 295K IOPS | 243K IOPS
For polling I/O performance, I also did fio test as below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4)
I set 4 vcpu and 2 poll queues for VM.
It shows about 2% improvement in polling I/O.
| IOPS | avg latency
-----------------------------------------------------------
fio poll without queue_rqs() | 424K | 613.05 usec
-----------------------------------------------------------
fio poll with queue_rqs() | 435K | 601.01 usec
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
This patch supports polling I/O via virtio-blk driver. Polling
feature is enabled by module parameter "poll_queues" and it sets
dedicated polling queues for virtio-blk. This patch improves the
polling I/O throughput and latency.
The virtio-blk driver doesn't not have a poll function and a poll
queue and it has been operating in interrupt driven method even if
the polling function is called in the upper layer.
virtio-blk polling is implemented upon 'batched completion' of block
layer. virtblk_poll() queues completed request to io_comp_batch->req_list
and later, virtblk_complete_batch() calls unmap function and ends
the requests in batch.
virtio-blk reads the number of poll queues from module parameter
"poll_queues". If VM sets queue parameter as below,
("num-queues=N" [QEMU property], "poll_queues=M" [module parameter])
It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)]
as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default
queues, the poll queues have no callback function.
Regarding HW-SW queue mapping, the default queue mapping uses the
existing method that condsiders MSI irq vector. But the poll queue
doesn't have an irq, so it uses the regular blk-mq cpu mapping.
For verifying the improvement, I did Fio polling I/O performance test
with io_uring engine with the options below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N)
I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll
queues for VM.
As a result, IOPS and average latency improved about 10%.
Test result:
- Fio io_uring poll without virtio-blk poll support
-- numjobs=1 : IOPS = 339K, avg latency = 188.33us
-- numjobs=2 : IOPS = 367K, avg latency = 347.33us
-- numjobs=4 : IOPS = 383K, avg latency = 682.06us
- Fio io_uring poll with virtio-blk poll support
-- numjobs=1 : IOPS = 385K, avg latency = 165.94us
-- numjobs=2 : IOPS = 408K, avg latency = 313.28us
-- numjobs=4 : IOPS = 424K, avg latency = 613.05us
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Let the caller set it together with the end_io_data instead of passing
a pointless argument. Note the the target code did in fact already
set it and then just overrode it again by calling blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using the long printk(KERN_ERR "nbd: ...") to
output error message, defining pr_fmt and using
the short pr_err("") to do that. The replacemen is done
by using the following command:
sed -i 's/printk(KERN_ERR "nbd: /pr_err("/g' \
drivers/block/nbd.c
This patch also rewrap to 80 columns where possible.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-7-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When 'index' is a big numbers, it may become negative which forced
to 'int'. then 'index << part_shift' might overflow to a positive
value that is not greater than '0xfffff', then sysfs might complains
about duplicate creation. Because of this, move the 'index' judgment
to the front will fix it and be better.
Fixes: b0d9111a2d ("nbd: use an idr to keep track of nbd devices")
Fixes: 940c264984 ("nbd: fix possible overflow for 'first_minor' in nbd_dev_add()")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-6-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In our tests, "qemu-nbd" triggers a io hung:
INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x480/0x1050
? _raw_spin_lock_irqsave+0x3e/0xb0
schedule+0x9c/0x1b0
blk_mq_freeze_queue_wait+0x9d/0xf0
? ipi_rseq+0x70/0x70
blk_mq_freeze_queue+0x2b/0x40
nbd_add_socket+0x6b/0x270 [nbd]
nbd_ioctl+0x383/0x510 [nbd]
blkdev_ioctl+0x18e/0x3e0
__x64_sys_ioctl+0xac/0x120
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0
"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:
block nbd0: Send disconnect failed -32
Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.
Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Otherwise io will hung because request will only be completed if the
cmd has the flag 'NBD_CMD_INFLIGHT'.
Fixes: 07175cb1ba ("nbd: make sure request completion won't concurrent")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.
The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000040
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: knbd16-recv recv_work [nbd]
RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
Call Trace:
recv_work+0x3b/0xb0 [nbd]
process_one_work+0x1ed/0x390
worker_thread+0x4a/0x3d0
kthread+0x12a/0x150
ret_from_fork+0x22/0x30
Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).
Also adding a debug message to check the reference counter
of nbd_config during module removal.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Historically we did distinguish between a flag that surpressed partition
scanning, and a combinations of the minors variable and another flag if
any partitions were supported. This was generally confusing and doesn't
make much sense, but some corner case uses of the loop driver actually
do want to support manually added partitions on a device that does not
actively scan for partitions. To make things worsee the loop driver
also wants to dynamically toggle the scanning for partitions on a live
gendisk, which makes the disk->flags updates non-atomic.
Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables
just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART
in the loop driver.
Fixes: 1ebe2e5f9d ("block: remove GENHD_FL_EXT_DEVT")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of a virtual kernel address use a pointer of the associated
struct page as second parameter of gnttab_end_foreign_access().
Most users have that pointer available already and are creating the
virtual address from it, risking problems in case the memory is
located in highmem.
gnttab_end_foreign_access() itself won't need to get the struct page
from the address again.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean.
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmKKrTcQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgph/REAC0/7odRfJeTJ1PkJhSKFc7dhyS7rK4du2s
3+z+H6Yeua2yVIJb0mYYGEJcOUUQ9nD2T9424n3NzDOw88U4y8Vg2YEH+UiJBuj4
AJoxPNkQdxL7WzmwHmRNLCcOOFhISLqWiCJSr45d+LP1f6aO24Q9lewYWxtNA4TW
mqb7Ne7e3Z77m9rmsCsZ26bzQHg1EEQ6qgjZM9tqMhOeTqYhmrqfrD9KtG8TIkpK
N8277E5QcequHf7v6VpKqEOzf3d2kx55JaZdu+oxLPVMED3wJJFwcYF1/xmM7Fgx
tp7xCjqqUHXwKvJNCFJpnvw+cXu0Ct7cWOIG4ROCvaTD4vBI1KzZLc0gO7pKFW0Y
hNIlMXr4n8PmonS81tMV4TqmRWxedX/jxuaeJCVNr89PqYU4luPpigJZqv7rlGry
KZUlktQot22M/7FC2MS6KhgbQKLPrRGTAEyY/JNwBHckCZiduWQFlmKLQ926xQIJ
6vdjSzHK5MrT/d+yow3bGFxAJWloGJ+L+RsH0b+WikF81+6ic9P3AoStgbVilfKD
6sbjcju8SShDlQ+W/Ocm0rHC+i/RDKT3QqItXgfhA/1FfMPODQGc/xcZg+AdTswn
VSnUIkvk9/mTO0StilVfNJDfG1QkSpJ5Ilvs/DnIahZj6IG4QbJvtnVNbmQX6ptz
AUB4DdGwXg==
=geQL
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
- CONFIG_ZRAM: Zram is a user-facing feature, whereas zsmalloc is
not. Don't make the user chase down a technical dependency like
that, just select it in automatically when zram is requested. The
CONFIG_CRYPTO dependency is redundant due to more specific deps.
- CONFIG_ZPOOL: This is not a user-facing feature. Hide the symbol and
have it selected in as needed.
- CONFIG_ZSWAP: Select CRYPTO instead of depend. Common pattern.
- Make the ZSWAP suboptions and their descriptions (compression,
allocation backend) a bit more straight-forward for the user.
Link: https://lkml.kernel.org/r/20220510152847.230957-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Simplify blkfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.
Reported-by: Xu Jianhai <zero.xu@bytedance.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last traces of the IDE driver went away in commit b7fb14d3ac
("ide: remove the legacy ide driver") but it left behind some traces
of old documentation.
As luck would have it Randy and I would submit similar changes within
a week of each other to address this. As Randy's commit is in the doc
tree already - this delta is just the stuff my removal contained that
was not in Randy's IDE doc removal.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/all/20220427165917.GE12977@windriver.com
[phil@philpotter.co.uk: removed diffs already added by others]
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-5-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 2nd trial allocation under per-cpu presumption has been used to
prevent regression of allocation failure. However, it makes trouble for
maintenance without significant benefit. The slowpath branch is executed
extremely rarely: getting there is problematic. Therefore, we delete this
branch.
Since b09ab054b6 ("zram: support BDI_CAP_STABLE_WRITES"), zram has used
QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd
memory allocations. Since we remove second trial memory allocation logic,
we could remove the STABLE_WRITES flag because there is no change buffer
to be modified under us.
Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the irrelevant changelogs and todo notes and just leave the SPDX
marker and the copyright notice.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220419063303.583106-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The copyright statement says:
"Redistribution of this file is permitted under the GNU General Public
License." and was added by Ted in 1993, at which point GPLv2 only
was the default Linux license.
Replace it with the usual GPLv2 only SPDX header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220419063303.583106-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge loop.h into loop.c as all the content is only used there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220419063303.583106-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently various places test if direct IO is possible on a file by
checking for the existence of the direct_IO address space operation.
This is a poor choice, as the direct_IO operation may not be used - it is
only used if the generic_file_*_iter functions are called for direct IO
and some filesystems - particularly NFS - don't do this.
Instead, introduce a new f_mode flag: FMODE_CAN_ODIRECT and change the
various places to check this (avoiding pointer dereferences).
do_dentry_open() will set this flag if ->direct_IO is present, so
filesystems do not need to be changed.
NFS *is* changed, to set the flag explicitly and discard the direct_IO
entry in the address_space_operations for files.
Other filesystems which currently use noop_direct_IO could usefully be
changed to set this flag instead.
Link: https://lkml.kernel.org/r/164859778128.29473.15189737957277399416.stgit@noble.brown
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is the last driver making use of fd_request->error_count, which is
easy to get wrong as was shown in floppy.c. We don't need to keep it
there, it can be moved to the atari_floppy_struct instead, so let's do
this.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the directory name used to create a nullb device through
sysfs is not used as the device name, potentially causing headaches for
users if devices are already created through the modprobe operation
withe the nr_device module parameter not set to 0. E.g. a user can do
"mkdir /sys/kernel/config/nullb/nullb0" to create a nullb device even
though /dev/nullb0 was already created by modprobe. In this case, the
configfs nullb device will be named nullb1, causing confusion for the
user.
Simplify this by using the configfs directory name as the nullb device
name, always, unless another nullb device is already using the same
name. E.g. if modprobe created nullb0, then:
$ mkdir /sys/kernel/config/nullb/nullb0
mkdir: cannot create directory '/sys/kernel/config/nullb/nullb0': File
exists
will be reported to the user.
To implement this, the function null_find_dev_by_name() is added to
check for the existence of a nullb device with the name used for a new
configfs device directory. nullb_group_make_item() uses this new
function to check if the directory name can be used as the disk name.
Finally, null_add_dev() is modified to use the device config item name
as the disk name for a new nullb device created using configfs.
The naming of devices created though modprobe remains unchanged.
Of note is that it is possible for a user to create through configfs a
nullb device with the same name as an existing device. E.g.
$ mkdir /sys/kernel/config/nullb/null
will successfully create the nullb device named "null" but this block
device will however not appear under /dev/ since /dev/null already
exists.
Suggested-by: Joseph Bacik <josef@toxicpanda.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220420005718.3780004-5-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the pr_fmt() macro to prefix all null_blk pr_xxx() messages with
"null_blk:" to clarify which module is printing the messages. Also add
a pr_info() message in null_add_dev() to print the name of a newly
created disk.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220420005718.3780004-4-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the null_create_dev() and null_destroy_dev() helper functions
to respectivel create nullb devices on modprobe and destroy them on
rmmod. The null_destroy_dev() helper avoids duplicated code in the
null_init() and null_exit() functions for deleting devices.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220420005718.3780004-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bdev_discard_alignment to calculate the correct discard alignment
offset even for partitions instead of just looking at the queue limit.
Also switch to use bdev_discard_granularity to get rid of the last direct
queue reference in xen_blkbk_discard.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-12-hch@lst.de
[axboe: fold in 'q' removal as it's now unused]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bdev_discard_alignment to calculate the correct discard alignment
offset even for partitions instead of just looking at the queue limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop driver never sets a discard_alignment, so it also doens't need
to clear it to zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):
"discard_sector_alignment can be used by OS when splitting a request
based on alignment. "
And at least qemu does set it to the discard granularity.
So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.
Fixes: 1f23816b8e ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by null_blk is mostly
harmless but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by nbd is mostly harmless
but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of bio_blkcg actually want the CSS, so replace it with an
interface that does return the CSS. This now allows to move
struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a
public header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Today it's only possible to write back as a page, idle, or huge. A user
might want to writeback pages which are huge and idle first as these idle
pages do not require decompression and make a good first pass for
writeback.
Idle writeback specifically has the advantage that a refault is unlikely
given that the page has been swapped for some amount of time without being
refaulted.
Huge writeback has the advantage that you're guaranteed to get the maximum
benefit from a single page writeback, that is, you're reclaiming one full
page of memory. Pages which are compressed in zram being written back
result in some benefit which is always less than a page size because of
the fact that it was compressed.
The primary use of this is for minimizing refaults in situations where the
device has to be sensitive to storage endurance. On ChromeOS we have
devices with slow eMMC and repeated writes and refaults can negatively
affect performance and endurance.
Link: https://lkml.kernel.org/r/20220322215821.1196994-1-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.
[ It turns out this has been around, and that others have reported the
KASAN splats over the years, but Minh Yuan had a reproducer for it and
so gets primary credit for reporting it for this fix - Linus ]
The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats. The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.
Let's just add a config option to completely disable this ioctl and
leave it disabled by default. Distros shouldn't use it, and only those
running on antique hardware might need to enable it.
Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Total 16 bytes can be saved in two ways:
1) The field 'bio' will only be used in bio based mode, and the field
'rq' will only be used in mq mode. Since they won't be used in the
same time, declare a union for them.
2) The field 'bool fake_timeout' can be placed in the hole after the
field 'error'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220426022133.3999006-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
lo_refcount counts how many openers a loop device has, but that count
is already provided by the block layer in the bd_openers field of the
whole-disk block_device. Remove lo_refcount and allow opens to
succeed even on devices beeing deleted - now that ->free_disk is
implemented we can handle that race gracefull and all I/O on it will
just fail. Similarly there is a small race window now where
loop_control_remove does not synchronize the delete vs the remove
due do bd_openers not being under lo_mutex protection, but we can
handle that just as gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since ->release is called with disk->open_mutex held, and __loop_clr_fd()
from lo_release() is called via ->release when disk_openers() == 0, we are
guaranteed that "struct file" which will be passed to loop_validate_file()
via fget() cannot be the loop device __loop_clr_fd(lo, true) will clear.
Thus, there is no need to hold loop_validate_mutex from __loop_clr_fd()
if release == true.
When I made commit 3ce6e1f662 ("loop: reintroduce global lock for
safe loop_validate_file() traversal"), I wrote "It is acceptable for
loop_validate_file() to succeed, for actual clear operation has not started
yet.". But now I came to feel why it is acceptable to succeed.
It seems that the loop driver was added in Linux 1.3.68, and
if (lo->lo_refcnt > 1)
return -EBUSY;
check in loop_clr_fd() was there from the beginning. The intent of this
check was unclear. But now I think that current
disk_openers(lo->lo_disk) > 1
form is there for three reasons.
(1) Avoid I/O errors when some process which opens and reads from this
loop device in response to uevent notification (e.g. systemd-udevd),
as described in commit a1ecac3b06 ("loop: Make explicit loop
device destruction lazy"). This opener is short-lived because it is
likely that the file descriptor used by that process is closed soon.
(2) Avoid I/O errors caused by underlying layer of stacked loop devices
(i.e. ioctl(some_loop_fd, LOOP_SET_FD, other_loop_fd)) being suddenly
disappeared. This opener is long-lived because this reference is
associated with not a file descriptor but lo->lo_backing_file.
(3) Avoid I/O errors caused by underlying layer of mounted loop device
(i.e. mount(some_loop_device, some_mount_point)) being suddenly
disappeared. This opener is long-lived because this reference is
associated with not a file descriptor but mount.
While race in (1) might be acceptable, (2) and (3) should be checked
racelessly. That is, make sure that __loop_clr_fd() will not run if
loop_validate_file() succeeds, by doing refcount check with global lock
held when explicit loop device destruction is requested.
As a result of no longer waiting for lo->lo_mutex after setting Lo_rundown,
we can remove pointless BUG_ON(lo->lo_state != Lo_rundown) check.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220330052917.2566582-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, udev change event is generated for a loop device before the
device is ready for IO. Due to serialization on lo->lo_mutex in
lo_open() this does not matter because anybody is able to open the
device and do IO only after the configuration is finished. However this
synchronization in lo_open() is going away so make sure userspace
reacting to the change event will see the new device state by generating
the event only when the device is setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that the lo_device which is stored in the gendisk private
data is valid until the gendisk is freed. Currently the loop driver
uses a lot of effort to make sure a device is not freed when it is
still in use, but to to fix a potential deadlock this will be relaxed
a bit soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->release is only called after all outstanding I/O has completed, so only
freeze the queue when clearing the backing file of a live loop device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By the time the final ->release is called there can't be outstanding I/O.
For non-final ->release there is no need for driver action at all.
Thus remove the useless queue freeze.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing prevents a file system or userspace opener of the block device
from redirtying the page right afte sync_blockdev returned. Fortunately
data in the page cache during a block device change is mostly harmless
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to reinitialize idle_worker_list, worker_tree and timer
every time a loop device is configured. Just initialize them once at
allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a common helper for both timer based and uncoditional freeing of idle
workers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper that returns the openers for a given gendisk to avoid having
drivers poke into disk->part0 to get at this information in a somewhat
cumbersome way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the bdev variable and just use the gendisk pointed to by the
zram_device directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a local variable for the gendisk instead of the part0 block_device,
as the gendisk is what this function actually operates on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bdev parameter to ->ioctl contains the block device that the ioctl
is called on, which can be the partition. But the openers check in
nbd_bdev_reset really needs to check use the whole device, so switch to
using that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export IO accounting interfaces in terms of block_device now that
gendisk has become more internal to block core.
Rename __part_{start,end}_io_acct's first argument from part to bdev.
Rename __part_{start,end}_io_acct to bdev_{start,end}_io_acct and
export them. Remove disk_{start,end}_io_acct and update caller (zram)
to use bdev_{start,end}_io_acct.
DM can now be updated to use bdev_{start,end}_io_acct.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220418022733.56168-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions. This fixes the following warnings from coccicheck:
./drivers/block/drbd/drbd_req.c:912:9-10: WARNING: return of 0/1 in
function 'remote_due_to_read_balancing' with return type bool
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-8-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of invoking a synchronize_rcu() to free a pointer
after a grace period we can directly make use of new API
that does the same but in more efficient way.
TO: Jens Axboe <axboe@kernel.dk>
TO: Philipp Reisner <philipp.reisner@linbit.com>
TO: Jason Gunthorpe <jgg@nvidia.com>
TO: drbd-dev@lists.linbit.com
TO: linux-block@vger.kernel.org
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-7-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
when run checkpath.pl for the first patch, found that
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'.
so fix it. BTW
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-6-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variable err is set to '-EIO' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
drivers/block/drbd/drbd_receiver.c:3955:5: warning: Value stored to
'err' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc -Wextra warns about mixing drbd_state_rv with drbd_ret_code
in a couple of places:
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_set_role':
drivers/block/drbd/drbd_nl.c:777:14: warning: comparison between 'enum drbd_state_rv' and 'enum drbd_ret_code' [-Wenum-compare]
777 | if (retcode != NO_ERROR)
| ^~
drivers/block/drbd/drbd_nl.c:784:12: warning: implicit conversion from 'enum drbd_ret_code' to 'enum drbd_state_rv' [-Wenum-conversion]
784 | retcode = ERR_MANDATORY_TAG;
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_attach':
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
1965 | retcode = rv; /* FIXME: Type mismatch. */
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_connect':
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2690 | retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_disconnect':
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2803 | retcode = rv; /* FIXME: Type mismatch. */
| ^
In each case, both are passed into drbd_adm_finish(), which just takes
a 32-bit integer and is happy with either, presumably intentionally.
Restructure the code to pass either type directly in there in most
cases, avoiding the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes: 036b17eaab ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract away implementation details from file systems by providing a
block_device based helper to retrieve the discard granularity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to query the number of sectors support per each discard bio
based on the block device and use this helper to stop various places from
poking into the request_queue to see if discard is supported and if so how
much. This mirrors what is done e.g. for write zeroes as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the FUA flag based on the block_device instead of
having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the write cache flag based on the block_device
instead of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sanitize the calling conventions and use a goto label to cleanup the
code flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220415045258.199825-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bdev version does the right thing for partitions, so use that.
Fixes: 9104d31a75 ("drbd: introduce WRITE_SAME support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220415045258.199825-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bdev based limits helpers where they exist.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220415045258.199825-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold each branch into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220415045258.199825-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig