The vsock_diag.ko module will need to check socket table membership.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The socket table symbols need to be exported from vsock.ko so that the
vsock_diag.ko module will be able to traverse sockets.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
from Sara Sharon.
2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
Kasiviswanathan.
3) Fix session and tunnel release races in l2tp, from Guillaume Nault
and Sabrina Dubroca.
4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.
5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
cap check, invalid memory access in IPoIB support, etc.)
6) tun_get_user() should bail if skb->len is zero, from Alexander
Potapenko.
7) Fix RCU lookups in inetpeer, from Eric Dumazet.
8) Fix locking in packet_do_bund().
9) Handle cb->start() error properly in netlink dump code, from Jason
A. Donenfeld.
10) Handle multicast properly in UDP socket early demux code. From Paolo
Abeni.
11) Several erspan bug fixes in ip_gre, from Xin Long.
12) Fix use-after-free in socket filter code, in order to handle the
fact that listener lock is no longer taken during the three-way TCP
handshake. From Eric Dumazet.
13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.
14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: 8021q: skip packets if the vlan is down
bpf: fix bpf_tail_call() x64 JIT
net: stmmac: dwmac-rk: Add RK3128 GMAC support
rndis_host: support Novatel Verizon USB730L
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
mlxsw: spectrum_router: Track RIF of IPIP next hops
mlxsw: spectrum_router: Move VRF refcounting
net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
net: mvpp2: Fix clock resource by adding an optional bus clock
r8152: add Linksys USB3GIGV1 id
l2tp: fix l2tp_eth module loading
ip_gre: erspan device should keep dst
ip_gre: set tunnel hlen properly in erspan_tunnel_init
ip_gre: check packet length and mtu correctly in erspan_xmit
ip_gre: get key from session_id correctly in erspan_rcv
tipc: use only positive error codes in messages
ppp: fix __percpu annotation
udp: perform source validation for mcast early demux
IPv4: early demux can return an error code
...
Pass extack arg to br_add_if. Add messages for a couple of failures
and pass arg to netdev_master_upper_dev_link.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack to do_set_master and down to ndo_add_slave
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add netlink_ext_ack to netdev_notifier_info to allow notifier
handlers to return errors to userspace.
Clean up the initialization in dev.c such that extack is easily
added in subsequent patches where relevant. Specifically, remove
the init call in call_netdevice_notifiers_info and have callers
initalize on stack when info is declared.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the vlan is down, free the packet instead of proceeding with other
processing, or counting it as received. If vlan interfaces are used
as slaves for bonding, with arp monitoring for connectivity, if the rx
counter is seen to be incrementing, then the bond device will not
observe that the interface is down.
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
x-netns interfaces are bound to two netns: the link netns and the upper
netns. Usually, this kind of interfaces is created in the link netns and
then moved to the upper netns. At the end, the interface is visible only
in the upper netns. The link nsid is advertised via netlink in the upper
netns, thus the user always knows where is the link part.
There is no such mechanism in the link netns. When the interface is moved
to another netns, the user cannot "follow" it.
This patch adds a new netlink attribute which helps to follow an interface
which moves to another netns. When the interface is unregistered, the new
nsid is advertised. If the interface is a x-netns interface (ie
rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed.
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compiler does not really know that skb_shinfo(to|from) are constants
in skb_try_coalesce(), lets cache their values to shrink code.
We might even take care of skb_zcopy() calls later.
$ size net/core/skbuff.o.before net/core/skbuff.o
text data bss dec hex filename
40727 1298 0 42025 a429 net/core/skbuff.o.before
40631 1298 0 41929 a3c9 net/core/skbuff.o
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
no users in the tree.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/core/dev.c:1306: warning: No description found for parameter 'name'
net/core/dev.c:1306: warning: Excess function parameter 'alias' description in 'dev_get_alias'
Fixes: 6c5570016b ("net: core: decouple ifalias get/set from rtnl lock")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces RFC Draft ndata section 3.2 Priority Based
Scheduler (SCTP_SS_RR).
Works by maintaining a list of enqueued streams and tracking the last
one used to send data. When the datamsg is done, it switches to the next
stream.
See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces RFC Draft ndata section 3.4 Priority Based
Scheduler (SCTP_SS_PRIO).
It works by having a struct sctp_stream_priority for each priority
configured. This struct is then enlisted on a queue ordered per priority
if, and only if, there is a stream with data queued, so that dequeueing
is very straightforward: either finish current datamsg or simply dequeue
from the highest priority queued, which is the next stream pointed, and
that's it.
If there are multiple streams assigned with the same priority and with
data queued, it will do round robin amongst them while respecting
datamsgs boundaries (when not using idata chunks), to be reasonably
fair.
We intentionally don't maintain a list of priorities nor a list of all
streams with the same priority to save memory. The first would mean at
least 2 other pointers per priority (which, for 1000 priorities, that
can mean 16kB) and the second would also mean 2 other pointers but per
stream. As SCTP supports up to 65535 streams on a given asoc, that's
1MB. This impacts when giving a priority to some stream, as we have to
find out if the new priority is already being used and if we can free
the old one, and also when tearing down.
The new fields in struct sctp_stream_out_ext and sctp_stream are added
under a union because that memory is to be shared with other schedulers.
See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As defined per RFC Draft ndata Section 4.3.3, named as
SCTP_STREAM_SCHEDULER_VALUE.
See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As defined per RFC Draft ndata Section 4.3.2, named as
SCTP_STREAM_SCHEDULER.
See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the hooks necessary to do stream scheduling, as
per RFC Draft ndata. It also introduces the first scheduler, which is
what we do today but now factored out: first come first served (FCFS).
With stream scheduling now we have to track which chunk was enqueued on
which stream and be able to select another other than the in front of
the main outqueue. So we introduce a list on sctp_stream_out_ext
structure for this purpose.
We reuse sctp_chunk->transmitted_list space for the list above, as the
chunk cannot belong to the two lists at the same time. By using the
union in there, we can have distinct names for these moments.
sctp_sched_ops are the operations expected to be implemented by each
scheduler. The dequeueing is a bit particular to this implementation but
it is to match how we dequeue packets today. We first dequeue and then
check if it fits the packet and if not, we requeue it at head. Thus why
we don't have a peek operation but have dequeue_done instead, which is
called once the chunk can be safely considered as transmitted.
The check removed from sctp_outq_flush is now performed by
sctp_stream_outq_migrate, which is only called during assoc setup.
(sctp_sendmsg() also checks for it)
The only operation that is foreseen but not yet added here is a way to
signalize that a new packet is starting or that the packet is done, for
round robin scheduler per packet, but is intentionally left to the
patch that actually implements it.
Support for I-DATA chunks, also described in this RFC, with user message
interleaving is straightforward as it just requires the schedulers to
probe for the feature and ignore datamsg boundaries when dequeueing.
See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the stream schedulers, sctp_stream_out will become too big to be
allocated by kmalloc and as we need to allocate with BH disabled, we
cannot use __vmalloc in sctp_stream_init().
This patch moves out the stats from sctp_stream_out to
sctp_stream_out_ext, which will be allocated only when the application
tries to sendmsg something on it.
Just the introduction of sctp_stream_out_ext would already fix the issue
described above by splitting the allocation in two. Moving the stats
to it also reduces the pressure on the allocator as we will ask for less
memory atomically when creating the socket and we will use GFP_KERNEL
later.
Then, for stream schedulers, we will just use sctp_stream_out_ext.
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is 1 place allocating it and another reallocating. Move such
procedures to a common function.
v2: updated changelog
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is 1 place allocating it and 2 other reallocating. Move such
procedures to a common function.
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As SCTP supports up to 65535 streams, that can lead to very large
allocations in sctp_stream_init(). As Xin Long noticed, systems with
small amounts of memory are more prone to not have enough memory and
dump warnings on dmesg initiated by user actions. Thus, silence them.
Also, if the reallocation of stream->out is not necessary, skip it and
keep the memory we already have.
Reported-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device alias can be set by either rtnetlink (rtnl is held) or sysfs.
rtnetlink hold the rtnl mutex, sysfs acquires it for this purpose.
Add an extra mutex for it and use rcu to protect concurrent accesses.
This allows the sysfs path to not take rtnl and would later allow
to not hold it when dumping ifalias.
Based on suggestion from Eric Dumazet.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When RTM_GETSTATS was added the fields of its header struct were not all
initialized when returning the result thus leaking 4 bytes of information
to user-space per rtnl_fill_statsinfo call, so initialize them now. Thanks
to Alexander Potapenko for the detailed report and bisection.
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 10c9ead9f3 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the ipmr module to not forward packets if:
- The packet is marked with the offload_mr_fwd_mark, and
- Both input interface and output interface share the same parent ID.
This way, a packet can go through partial multicast forwarding in the
hardware, where it will be forwarded only to the devices that share the
same parent ID (AKA, reside inside the same hardware). The kernel will
forward the packet to all other interfaces.
To do this, add the ipmr_offload_forward helper, which per skb, ingress VIF
and egress VIF, returns whether the forwarding was offloaded to hardware.
The ipmr_queue_xmit frees the skb and does not forward it if the result is
a true value.
All the forwarding path code compiles out when the CONFIG_NET_SWITCHDEV is
not set.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to allow the ipmr module to do partial multicast forwarding
according to the device parent ID, add the device parent ID field to the
VIF struct. This way, the forwarding path can use the parent ID field
without invoking switchdev calls, which requires the RTNL lock.
When a new VIF is added, set the device parent ID field in it by invoking
the switchdev_port_attr_get call.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting from linux-4.4, 3WHS no longer takes the listener lock.
Since this time, we might hit a use-after-free in sk_filter_charge(),
if the filter we got in the memcpy() of the listener content
just happened to be replaced by a thread changing listener BPF filter.
To fix this, we need to make sure the filter refcount is not already
zero before incrementing it again.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move dissection of tunnel info from the flower classifier to the flow
dissector where all other dissection occurs. This should not have any
behavioural affect on other users of the flow dissector.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The l2tp_eth module crashes if its netlink callbacks are run when the
pernet data aren't initialised.
We should normally register_pernet_device() before the genl callbacks.
However, the pernet data only maintain a list of l2tpeth interfaces,
and this list is never used. So let's just drop pernet handling
instead.
Fixes: d9e31d17ce ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch 'ip_gre: ipgre_tap device should keep dst' fixed
the issue ipgre_tap dev mtu couldn't be updated in tx path.
The same fix is needed for erspan as well.
Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to __gre_tunnel_init, tunnel->hlen should be set as the
headers' length between inner packet and outer iphdr.
It would be used especially to calculate a proper mtu when updating
mtu in tnl_update_pmtu. Now without setting it, a bigger mtu value
than expected would be updated, which hurts performance a lot.
This patch is to fix it by setting tunnel->hlen with:
tunnel->tun_hlen + tunnel->encap_hlen + sizeof(struct erspanhdr)
Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a ARPHRD_ETHER device, skb->len in erspan_xmit is the length
of the whole ether packet. So before checking if a packet size
exceeds the mtu, skb->len should subtract dev->hard_header_len.
Otherwise, all packets with max size according to mtu would be
trimmed to be truncated packet.
Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
erspan only uses the first 10 bits of session_id as the key to look
up the tunnel. But in erspan_rcv, it missed 'session_id & ID_MASK'
when getting the key from session_id.
If any other flag is also set in session_id in a packet, it would
fail to find the tunnel due to incorrect key in erspan_rcv.
This patch is to add 'session_id & ID_MASK' there and also remove
the unnecessary variable session_id.
Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different namespace application might require different time period in
second to disable Fastopen on active TCP sockets.
Tested:
Simulate following similar situation that the server's data gets dropped
after 3WHS.
C ---- syn-data ---> S
C <--- syn/ack ----- S
C ---- ack --------> S
S (accept & write)
C? X <- data ------ S
[retry and timeout]
And then print netstat of TCPFastOpenBlackhole, the counter increased as
expected when the firewall blackhole issue is detected and active TFO is
disabled.
# cat /proc/net/netstat | awk '{print $91}'
TCPFastOpenBlackhole
1
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different namespace application might require different tcp_fastopen_key
independently of the host.
David Miller pointed out there is a leak without releasing the context
of tcp_fastopen_key during netns teardown. So add the release action in
exit_batch path.
Tested:
1. Container namespace:
# cat /proc/sys/net/ipv4/tcp_fastopen_key:
2817fff2-f803cf97-eadfd1f3-78c0992b
cookie key in tcp syn packets:
Fast Open Cookie
Kind: TCP Fast Open Cookie (34)
Length: 10
Fast Open Cookie: 1e5dd82a8c492ca9
2. Host:
# cat /proc/sys/net/ipv4/tcp_fastopen_key:
107d7c5f-68eb2ac7-02fb06e6-ed341702
cookie key in tcp syn packets:
Fast Open Cookie
Kind: TCP Fast Open Cookie (34)
Length: 10
Fast Open Cookie: e213c02bf0afbc8a
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'publish' logic is not necessary after commit dfea2aa654 ("tcp:
Do not call tcp_fastopen_reset_cipher from interrupt context"), because
in tcp_fastopen_cookie_gen，it wouldn't call tcp_fastopen_init_key_once.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different namespace application might require enable TCP Fast Open
feature independently of the host.
This patch series continues making more of the TCP Fast Open related
sysctl knobs be per net-namespace.
Reported-by: Luca BRUNO <lucab@debian.org>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the dsa_ptr is a dsa_port instance, there is no need to keep
the tag operations in the dsa_switch_tree structure. Remove it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With DSA, a master net device (CPU facing interface) has a dsa_ptr
pointer to which hangs a dsa_switch_tree. This is not correct because a
master interface is wired to a dedicated switch port, and because we can
theoretically have several master interfaces pointing to several CPU
ports of the same switch fabric.
Change the master interface's dsa_ptr for the CPU dsa_port pointer.
This is a step towards supporting multiple CPU ports.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to make DSA master devices point to their corresponding
CPU port instead of the whole tree, add copies of dst and rcv in the
dsa_port structure so that we keep fast access in the receive hot path.
Also keep the copies at the beginning of the dsa_port structure in order
to ensure they are available in cacheline 1.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA tagging protocol operations are specific to each CPU port,
thus the dsa_device_ops pointer belongs to the dsa_port structure.
>From now on assign a slave's xmit copy from its CPU port tagging
operations. This will ease the future support for multiple CPU ports.
Also keep the tag_ops at the beginning of the dsa_port structure so that
we ensure copies for hot path are in cacheline 1.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When resolving the DSA tagging protocol used by a CPU switch, use a
temporary "tag_ops" variable to store the dsa_device_ops instead of
using directly dst->tag_ops. This will make the future patches moving
this pointer around easier to read.
There is no functional changes.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it clear that the master device is linked to a CPU port by using
"cpu_dp" for the dsa_port variable in master.c instead of "port", then
use a "port" variable to describe the port index, as usually seen in
other places of DSA core.
This will make the future patch touching dsa_ptr more readable. There is
no functional changes.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA tagging code does not need to know about the DSA architecture,
it only needs to return the slave device corresponding to the source
port index (and eventually the source device index for cascade-capable
switches) parsed from the frame received on the master device.
For this purpose, provide an inline dsa_master_get_slave helper which
validates the device and port indexes and look up the slave device.
This makes the tagging rcv functions more concise and robust, and also
makes dsa_get_cpu_port obsolete.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The assignment of -EINVAL to variable ret is redundant as it
is being overwritten on the following error exit paths or
to the return value from the following call to basic_set_parms.
Fix this up by removing it. Cleans up clang warning message:
net/sched/cls_basic.c:185:2: warning: Value stored to 'err' is never read
Fixes: 1d8134fea2 ("net_sched: use idr to allocate basic filter handles")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function ipmr_notifier_init is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'ipmr_notifier_init' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit e3a77561e7 ("tipc: split up function tipc_msg_eval()"),
we have updated the function tipc_msg_lookup_dest() to set the error
codes to negative values at destination lookup failures. Thus when
the function sets the error code to -TIPC_ERR_NO_NAME, its inserted
into the 4 bit error field of the message header as 0xf instead of
TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code.
In this commit, we set only positive error code.
Fixes: e3a77561e7 ("tipc: split up function tipc_msg_eval()")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP early demux can leverate the rx dst cache even for
multicast unconnected sockets.
In such scenario the ipv4 source address is validated only on
the first packet in the given flow. After that, when we fetch
the dst entry from the socket rx cache, we stop enforcing
the rp_filter and we even start accepting any kind of martian
addresses.
Disabling the dst cache for unconnected multicast socket will
cause large performace regression, nearly reducing by half the
max ingress tput.
Instead we factor out a route helper to completely validate an
skb source address for multicast packets and we call it from
the UDP early demux for mcast packets landing on unconnected
sockets, after successful fetching the related cached dst entry.
This still gives a measurable, but limited performance
regression:
rp_filter = 0 rp_filter = 1
edmux disabled: 1182 Kpps 1127 Kpps
edmux before: 2238 Kpps 2238 Kpps
edmux after: 2037 Kpps 2019 Kpps
The above figures are on top of current net tree.
Applying the net-next commit 6e617de84e ("net: avoid a full
fib lookup when rp_filter is disabled.") the delta with
rp_filter == 0 will decrease even more.
Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently no error is emitted, but this infrastructure will
used by the next patch to allow source address validation
for mcast sockets.
Since early demux can do a route lookup and an ipv4 route
lookup can return an error code this is consistent with the
current ipv4 route infrastructure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Hajnoczi