Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support the --show-nr-samples in the TUI browser.
Committer notes:
Lift the restriction about --tui but leave it for --gtk:
$ export LD_LIBRARY_PATH=~/lib64
$ perf annotate --gtk --show-nr-samples --show-nr-samples is not available in --gtk mode at this time
$
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046023-5646-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --show-nr-samples option to "perf annotate" so that it matches "perf
report".
Committer note:
Note that it can't be used together with --show-total-period, which
seems like a silly limitation, that can be lifted at some point.
Made it bail out if not on --stdio.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046008-5511-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we parse an event we may get a value from the kernel in response to
PERF_SAMPLE_WEIGHT being set in perf_event_attr->sample_type, and if it
is not set, then perf_sample->weight will be set to zero, which should
be ok according to a discussion with Andi Kleen [1]:
1: https://lkml.kernel.org/r/20170724174637.GS3044@two.firstfloor.org
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8ev8ufk3lzmvgz37yg9nv3qz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' was missing the handler for tracing data records.
Prior to this patch we obtained "unhandled" records when piping trace
events to perf annotate (using -D option to show the dump_printf
messages in process_event_synth_tracing_data_stub):
$ perf record -o - -e block:bio_free sleep 2 | perf annotate -D --stdio
...
0x78 [0xc]: PERF_RECORD_TRACING_DATA: unhandled!
...
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170719011839.99399-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In fixing the --show-total-period option it was noticed that the value
of sample->period was being overwritten, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: fd36f3dd79 ("perf hist: Pass struct sample to __hists__add_entry()")
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split from a larger patch, added the Fixes tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way to use perf_sample fields in the annotate code, storing
sample->period in sym_hist->addr->period and its sum in
sym_hist->period.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split and adjusted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.
For alignment, check that synthesized events don't exceed
pagesize.
Add the perf_event__synthesize_feature event call back to
process the new header records.
Before this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
After this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
# ========
# captured on: Mon May 22 16:33:43 2017
# ========
#
# hostname : my_hostname
# os release : 4.11.0-dbx-up_perf
# perf version : 4.11.rc6.g6277c80
# arch : x86_64
# nrcpus online : 72
# nrcpus avail : 72
# cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
# cpuid : GenuineIntel,6,63,2
# total memory : 263457192 kB
# cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate did not get some love for pipe-mode, and did not have
.attr and .buil_id setup (while record and inject did. Fix that.
It can easily be reproduced by:
perf record -o - noploop | perf annotate
that in my system shows:
0xd8 [0x28]: failed to process type: 9
Committer Testing:
Before:
$ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
stress: info: [11060] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
0x4470 [0x28]: failed to process type: 9
$ stress: info: [11060] successful run completed in 2s
$
After:
$ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
stress: info: [11871] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
stress: info: [11871] successful run completed in 2s
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
no symbols found in /usr/bin/stress, maybe install a debug package?
Percent | Source code & Disassembly of libc-2.24.so for cycles:uhH (6117 samples)
---------------------------------------------------------------------------------------
:
: Disassembly of section .text:
:
: 000000000003b050 <random_r>:
: __random_r():
10.56 : 3b050: test %rdi,%rdi
0.00 : 3b053: je 3b0d0 <random_r+0x80>
0.34 : 3b055: test %rsi,%rsi
0.00 : 3b058: je 3b0d0 <random_r+0x80>
0.46 : 3b05a: mov 0x18(%rdi),%eax
12.44 : 3b05d: mov 0x10(%rdi),%r8
0.18 : 3b061: test %eax,%eax
0.00 : 3b063: je 3b0b0 <random_r+0x60>
<SNIP>
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -q/--quiet option is to suppress any message. Sometimes users just
want to see the numbers and it can be used for that case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I wanted to know the hottest path through a function and figured the
branch-stack (LBR) information should be able to help out with that.
The below uses the branch-stack to create basic blocks and generate
statistics from them.
from to branch_i
* ----> *
|
| block
v
* ----> *
from to branch_i+1
The blocks are broken down into non-overlapping ranges, while tracking
if the start of each range is an entry point and/or the end of a range
is a branch.
Each block iterates all ranges it covers (while splitting where required
to exactly match the block) and increments the 'coverage' count.
For the range including the branch we increment the taken counter, as
well as the pred counter if flags.predicted.
Using these number we can find if an instruction:
- had coverage; given by:
br->coverage / br->sym->max_coverage
This metric ensures each symbol has a 100% spot, which reflects the
observation that each symbol must have a most covered/hottest
block.
- is a branch target: br->is_target && br->start == add
- for targets, how much of a branch's coverages comes from it:
target->entry / branch->coverage
- is a branch: br->is_branch && br->end == addr
- for branches, how often it was taken:
br->taken / br->coverage
after all, all execution that didn't take the branch would have
incremented the coverage and continued onward to a later branch.
- for branches, how often it was predicted:
br->pred / br->taken
The coverage percentage is used to color the address and asm sections;
for low (<1%) coverage we use NORMAL (uncolored), indicating that these
instructions are not 'important'. For high coverage (>75%) we color the
address RED.
For each branch, we add an asm comment after the instruction with
information on how often it was taken and predicted.
Output looks like (sans color, which does loose a lot of the
information :/)
$ perf record --branch-filter u,any -e cycles:p ./branches 27
$ perf annotate branches
Percent | Source code & Disassembly of branches for cycles:pu (217 samples)
---------------------------------------------------------------------------------
: branches():
0.00 : 40057a: push %rbp
0.00 : 40057b: mov %rsp,%rbp
0.00 : 40057e: sub $0x20,%rsp
0.00 : 400582: mov %rdi,-0x18(%rbp)
0.00 : 400586: mov %rsi,-0x20(%rbp)
0.00 : 40058a: mov -0x18(%rbp),%rax
0.00 : 40058e: mov %rax,-0x10(%rbp)
0.00 : 400592: movq $0x0,-0x8(%rbp)
0.00 : 40059a: jmpq 400656 <branches+0xdc>
1.84 : 40059f: mov -0x10(%rbp),%rax # +100.00%
3.23 : 4005a3: and $0x1,%eax
1.84 : 4005a6: test %rax,%rax
0.00 : 4005a9: je 4005bf <branches+0x45> # -54.50% (p:42.00%)
0.46 : 4005ab: mov 0x200bbe(%rip),%rax # 601170 <acc>
12.90 : 4005b2: add $0x1,%rax
2.30 : 4005b6: mov %rax,0x200bb3(%rip) # 601170 <acc>
0.46 : 4005bd: jmp 4005d1 <branches+0x57> # -100.00% (p:100.00%)
0.92 : 4005bf: mov 0x200baa(%rip),%rax # 601170 <acc> # +49.54%
13.82 : 4005c6: sub $0x1,%rax
0.46 : 4005ca: mov %rax,0x200b9f(%rip) # 601170 <acc>
2.30 : 4005d1: mov -0x10(%rbp),%rax # +50.46%
0.46 : 4005d5: mov %rax,%rdi
0.46 : 4005d8: callq 400526 <lfsr> # -100.00% (p:100.00%)
0.00 : 4005dd: mov %rax,-0x10(%rbp) # +100.00%
0.92 : 4005e1: mov -0x18(%rbp),%rax
0.00 : 4005e5: and $0x1,%eax
0.00 : 4005e8: test %rax,%rax
0.00 : 4005eb: je 4005ff <branches+0x85> # -100.00% (p:100.00%)
0.00 : 4005ed: mov 0x200b7c(%rip),%rax # 601170 <acc>
0.00 : 4005f4: shr $0x2,%rax
0.00 : 4005f8: mov %rax,0x200b71(%rip) # 601170 <acc>
0.00 : 4005ff: mov -0x10(%rbp),%rax # +100.00%
7.37 : 400603: and $0x1,%eax
3.69 : 400606: test %rax,%rax
0.00 : 400609: jne 400612 <branches+0x98> # -59.25% (p:42.99%)
1.84 : 40060b: mov $0x1,%eax
14.29 : 400610: jmp 400617 <branches+0x9d> # -100.00% (p:100.00%)
1.38 : 400612: mov $0x0,%eax # +57.65%
10.14 : 400617: test %al,%al # +42.35%
0.00 : 400619: je 40062f <branches+0xb5> # -57.65% (p:100.00%)
0.46 : 40061b: mov 0x200b4e(%rip),%rax # 601170 <acc>
2.76 : 400622: sub $0x1,%rax
0.00 : 400626: mov %rax,0x200b43(%rip) # 601170 <acc>
0.46 : 40062d: jmp 400641 <branches+0xc7> # -100.00% (p:100.00%)
0.92 : 40062f: mov 0x200b3a(%rip),%rax # 601170 <acc> # +56.13%
2.30 : 400636: add $0x1,%rax
0.92 : 40063a: mov %rax,0x200b2f(%rip) # 601170 <acc>
0.92 : 400641: mov -0x10(%rbp),%rax # +43.87%
2.30 : 400645: mov %rax,%rdi
0.00 : 400648: callq 400526 <lfsr> # -100.00% (p:100.00%)
0.00 : 40064d: mov %rax,-0x10(%rbp) # +100.00%
1.84 : 400651: addq $0x1,-0x8(%rbp)
0.92 : 400656: mov -0x8(%rbp),%rax
5.07 : 40065a: cmp -0x20(%rbp),%rax
0.00 : 40065e: jb 40059f <branches+0x25> # -100.00% (p:100.00%)
0.00 : 400664: nop
0.00 : 400665: leaveq
0.00 : 400666: retq
(Note: the --branch-filter u,any was used to avoid spurious target and
branch points due to interrupts/faults, they show up as very small -/+
annotations on 'weird' locations)
Committer note:
Please take a look at:
http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png
To see the colors.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
[ Moved sym->max_coverage to 'struct annotate', aka symbol__annotate(sym) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to initializa some fields (right now just a mutex) when we
allocate the per symbol annotation struct, so do it at the symbol
constructor instead of (ab)using the filter mechanism for that.
This way we remove one of the few cases we have for that symbol filter,
which will eventually led to removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cvz34avlz1lez888lob95390@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate --stdio' will colorize entries with most hits and
possibly some other aspects of its output, but those colors gets
suppressed if we redirect the output to a non-tty, allow keeping the
colors by adding a new option, --stdio-color, now this use case will
also output escape sequences for colors:
$ perf annotate --stdio-color | more
Based-on-a-patch-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sjrnixani5pg6qez640gaxhf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason we should suffer the '__' prefix for the base global
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves the reference of buildid dir to 'symfs/.debug' and
skips the local buildid dir when '--symfs' is given, so that every
single file opened by perf is relative to symfs directory now.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463658462-85131-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we only deal with fields in the passed struct perf_sample move
this method to struct machine, that is where the perf_sample fields
will be resolved to a struct addr_location, i.e. thread, map, symbol,
etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-a1ww2lbm2vbuqsv4p7ilubu9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding evsel specific function to sort hists_evsel based hists. The
hists__output_resort can be now used to sort common hists object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support dynamic sort keys for tracepoint
events. Dynamic sort keys can be created for specific fields in trace
events so it needs the event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org
[ Moving the evlist creation earlier in top was split to a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to add more info into the hist_entry. Also it
already passes too many argument, so passing sample directly will reduce
the overhead of the function call.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move setup_browser after all necessary initialization is done. This is
to remove the browser dependency from usage_with_options and friends.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is necessary to get rid of the browser dependency from
usage_with_options() and its friends. Because there's no code changing
the argc and argv, it'd be ok to check it early.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'annotate' tool does some filtering in the entries in a DSO but
forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV:
[root@zoo ~]# perf annotate netlink_poll
perf: Segmentation fault
-------- backtrace --------
perf[0x526ceb]
/lib64/libc.so.6(+0x34960)[0x7faedfbe0960]
perf(rb_erase+0x223)[0x499d63]
perf[0x4213e9]
perf[0x4bc123]
perf[0x4bc621]
perf[0x4bf26b]
perf[0x4bc855]
perf(perf_session__process_events+0x340)[0x4bddc0]
perf(cmd_annotate+0x6bb)[0x421b5b]
perf[0x479063]
perf(main+0x60a)[0x42098a]
/lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0]
perf[0x420aa9]
[0x0]
[root@zoo ~]#
Fix it by reseting the find cache when removing symbols.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: b685ac22b4 ("perf symbols: Add front end cache for DSO symbol lookup")
Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.
New hot key 't' is introduced for 'perf annotate' TUI.
Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Assign input_name, received from program arguments, to file data
structure.
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. match RB_CLEAR_NODE() with RB_EMPTY_NODE(), to check that it isn't
in a rb tree at the time of its deletion.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vumvhird765id11zbx00d2r8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By keeping pointers to machines, evlist and tool in ordered_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0c6huyaf59mqtm2ek9pmposl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes it takes a long time to resort hist entries for output in case
of a large data file. Show a progress bar window and inform user.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now tools that deals want to have an hists per evsel need to call
hists__init() before creating any evsels, which can be as early as when
parsing the command line, so do it before calling parse_options().
The current tools using hists/hist_entries are report, top and annotate,
change them to request per evsel hists.
This is in preparation for making evsels usable by 3rd party tools, that
not necessarily live in perf's source code repository.
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-usjx2la743f10ippj7p1b20x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf_session doesn't require that the evsels in its evlist are hists
containing ones.
Tools that are hists based and want to do per evsel events_stats
updates, if at some point this turns into a necessity, should do it in
the tool specific code, keeping the session class hists agnostic.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cli1bgwpo82mdikuhy3djsuy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not all tools need a hists instance per perf_evsel, so lets pave the way
to remove evsel->hists while leaving a way to access the hists from a
specially allocated evsel, one that comes with space at the end where
lives the evsel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because perf_session__new() can fail for more reasons than just ENOMEM,
modify error code(ENOMEM or EINVAL) to -1.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1411522417-9917-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently vmlinux_path__init() only tries to find vmlinux file from
current directory, /boot and some canonical directories with version
number of the running kernel. This can be a problem when reporting old
data recorded on a kernel version not running currently.
We can use --symfs option for this but it's annoying for user to do it
always. As we already have the info in the perf.data file, it can be
changed to use it for the search automatically.
Before:
$ perf report
...
# Samples: 4K of event 'cpu-clock'
# Event count (approx.): 1067250000
#
# Overhead Command Shared Object Symbol
# ........ .......... ................. ..............................
71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction
After:
# Overhead Command Shared Object Symbol
# ........ .......... ................. ....................
71.87% swapper [kernel.kallsyms] [k] native_safe_halt
This requires to change signature of symbol__init() to receive struct
perf_session_env *.
Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time ordering is generic for all kinds of events, so using generic
name 'ordered_events' for ordered_samples bool in perf_tool struct.
No functional change was intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-07mrqzcuhsks9wfmxrzsvemz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support callchain accumulation, @entry should be recognized if it's
accumulated or not when add_hist_entry() called. The period of an
accumulated entry should be added to ->stat_acc but not ->stat. Add
@sample_self arg for that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arun Sharma <asharma@fb.com>
Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-5-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
There're some duplicate code for counting number of samples. Add
hists__inc_nr_samples() and reuse it.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401335910-16832-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Arnaldo Carvalho de Melo
