Commit Graph

398 Commits

Author SHA1 Message Date
Sreekanth Reddy 48d6f0a6a5 scsi: mpt3sas: Use configured PCIe link speed, not max
When enabling high iops queues, the driver should use the HBA's configured
PCIe link speed instead of looking for the maximum link speed.

I.e. enable high iops queues only if Aero/Sea HBA's configured PCIe link
speed is set to 16GT/s.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26 22:58:34 -04:00
Sreekanth Reddy 381abbd1f7 scsi: mpt3sas: Remove CPU arch check to determine perf_mode
Currently default perf_mode is set to 'balanced' on Intel architecture
machines and on other machines default perf_mode is set to 'latency' mode.

This CPU architecture check is removed and the default perf_mode mode is
set to 'balanced' mode on all machines.

User can choose the required performance mode using perf_mode module
parameter.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26 22:58:34 -04:00
Tomas Henzl c9df144272 scsi: mpt3sas: use DEVICE_ATTR_{RO, RW}
Use existing macros.  No functional change.

[mkp: typo]

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20 16:28:02 -04:00
Tomas Henzl ab9f5adb8d scsi: mpt3sas: make driver options visible in sys
Support is easier with all driver parameters visible in sysfs.  Also I've
replaced a constant with an octal permission.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20 16:27:54 -04:00
Gustavo A. R. Silva 6ea3b189f7 scsi: mpt3sas: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where
we are expecting to fall through.

This patch fixes the following warning:

drivers/scsi/mpt3sas/mpt3sas_base.c: In function  _base_update_ioc_page1_inlinewith_perf_mode :
drivers/scsi/mpt3sas/mpt3sas_base.c:4510:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (ioc->high_iops_queues) {
      ^
drivers/scsi/mpt3sas/mpt3sas_base.c:4530:2: note: here
  case MPT_PERF_MODE_LATENCY:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.

Fixes: 30cb97023f38 ("scsi: mpt3sas: Introduce perf_mode module parameter")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20 15:37:02 -04:00
Suganath Prabu S 895d8860a1 scsi: mpt3sas: Update driver version to 29.100.00.00
Update driver version from 28.100.00.00 to 29.100.00.00
This is equivalent to Phase 10 OOB driver.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S ca7e1e9d88 scsi: mpt3sas: Introduce perf_mode module parameter
1. Introduce module parameter perf_mode for only Aero/Sea generation HBAs.

2. Update IOC page1 fields according to performance mode.

Below are the performance modes that can be enabled with module parameter
perf_mode:

 0: Balanced - Few high iops reply queues will be enabled.  Interrupt
    coalescing will be enabled only for these high iops reply descriptor
    queues.

 1: Iops - Interrupt coalescing will be enabled on all reply queues.
    Coalescing timeout is set to 0x20.This is default value for Aero.

 2: Latency - Interrupt coalescing will be enabled on all reply queues.
    Coalescing timeout is set to 0xA.  This is a legacy behavior similar to
    Ventura & Invader HBA series.

Default perf mode set by driver will be balanced mode if the following
conditions are met:

 - CPU vendor = Intel;
 - Aero controller working in 16GT/s pcie speed

Performance mode will be set to latency mode for all other cases.

4k Random Read IO performance numbers on 24 SAS SSD drives for above three
permormance modes. Performance data is from Intel Skylake and HGST SS300
(drive model SDLL1DLR400GCCA1).

IOPs:
 -----------------------------------------------------------------------
  |perf_mode    | qd = 1 | qd = 64 |   note                             |
  |-------------|--------|---------|-------------------------------------
  |balanced     |  259K  |  3061k  | Provides max performance numbers   |
  |             |        |         | both on lower QD workload &        |
  |             |        |         | also on higher QD workload         |
  |-------------|--------|---------|-------------------------------------
  |iops         |  220K  |  3100k  | Provides max performance numbers   |
  |             |        |         | only on higher QD workload.        |
  |-------------|--------|---------|-------------------------------------
  |latency      |  246k  |  2226k  | Provides good performance numbers  |
  |             |        |         | only on lower QD worklaod.         |
  -----------------------------------------------------------------------

Avarage Latency:
  -----------------------------------------------------
  |perf_mode    |  qd = 1      |    qd = 64           |
  |-------------|--------------|----------------------|
  |balanced     |  92.05 usec  |    501.12 usec       |
  |-------------|--------------|----------------------|
  |iops         |  108.40 usec |    498.10 usec       |
  |-------------|--------------|----------------------|
  |latency      |  97.10 usec  |    689.26 usec       |
  -----------------------------------------------------

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 2426f20903 scsi: mpt3sas: Enable interrupt coalescing on high iops
Enable interrupt coalescing only on high iops queues.

In ioc config page 1, offset 0x14 (ProductSpecific field) is used to
determine interrupt coalescing enabled/disabled on per reply descriptor
post queue group(8) basis.  If 31st bit is zero, then interrupt coalescing
is enabled for all reply descriptor post queues. If 31st bit is set to one,
then user can enable/disable interrupt coalescing on per reply descriptor
post queue group(8) basis. So to enable interrupt coalescing only on first
reply descriptor post queue group (i.e. on high iops queues), set bit 0 and
31.

This configuration should reset during driver unload or shutdown to the
default settings. For this, the driver takes copy of default ioc page 1 and
copies back the default or unmodified ioc page1 during unload and
shutdown. This means that on next driver load (e.g. if older version driver
is loaded by user), current modified changes on ioc page1 won't take
effect.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 728bbc6cbf scsi: mpt3sas: Affinity high iops queues IRQs to local node
High iops queues are mapped to non-managed irqs. Set affinity of
non-managed irqs to local numa node.  Low latency queues are mapped to
managed irqs.

Driver reserves some reply queues for max iops (through
pci_alloc_irq_vectors_affinity and .pre_vectors interface). The rest of
queues are for low latency.

Based on io workload in io submission path, driver will decide which group
of reply queues (either high iops queues or low latency queues) to be
used. High iops queues will be mapped to local numa node of controller and
low latency queues will be mapped to cpus across numa nodes. In general,
high iops and low latency queues should fit into 128 reply queues
which is the max number of reply queues supported by Aero/Sea.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 998c3001d3 scsi: mpt3sas: save and use MSI-X index for posting RD
In the IO submission path _base_get_msix_index is called twice. Initially
while getting the smid and subsequently while posting the request
descriptor (RD).

Refactor code to query msix index only while posting the request
descriptor. Save determined msix index in msix_io field.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 5dd48a555a scsi: mpt3sas: Use high iops queues under some circumstances
The driver will use round-robin method for io submission in batches within
the high iops queues when the number of in-flight ios on the target device
is larger than 8. Otherwise the driver will use low latency reply queues.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 0213651609 scsi: mpt3sas: change _base_get_msix_index prototype
Code refactoring.

In function _base_get_msix_index, add scmd as second argument. This change
is made in preparation for the next patch where we introduce a new function
to get the MSI-X index for high iops queues.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 18fd3d8cf9 scsi: mpt3sas: Add flag high_iops_queues
Aero controllers support balanced performance mode through the ability to
configure queues with different properties.

Reply queues with interrupt coalescing enabled are called "high iops reply
queues" and reply queues with interrupt coalescing disabled are called "low
latency reply queues".

The driver configures a combination of high iops and low latency reply
queues if:

 - HBA is an AERO controller;

 - MSI-X vectors supported by the HBA is 128;

 - Total CPU count in the system more than high iops queue count;

 - Driver is loaded with default max_msix_vectors module parameter; and

 - System booted in non-kdump mode.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00
Suganath Prabu S 79c74d03d5 scsi: mpt3sas: Add Atomic RequestDescriptor support on Aero
If the Aero HBA supports Atomic Request Descriptors, it sets the Atomic
Request Descriptor Capable bit in the IOCCapabilities field of the IOCFacts
Reply message. Driver uses an Atomic Request Descriptor as an alternative
method for posting an entry onto a request queue.

The posting of an Atomic Request Descriptor is an atomic operation,
providing a safe mechanism for multiple processors on the host to post
requests without synchronization. This Atomic Request Descriptor format is
identical to first 32 bits of Default Request Descriptor and uses only 32
bits.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:25 -04:00
Suganath Prabu S 078a4cc138 scsi: mpt3sas: function pointers of request descriptor
This code refactoring introduces function pointers.

Host uses Request Descriptors of different types for posting an entry onto
a request queue. Based on controller type and capabilities, host can also
use atomic descriptors other than normal descriptors.  Using function
pointer will avoid if-else statements

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:25 -04:00
Gen Zhang f9e3ebeea4 scsi: mpt3sas_ctl: fix double-fetch bug in _ctl_ioctl_main()
In _ctl_ioctl_main(), 'ioctl_header' is fetched the first time from
userspace. 'ioctl_header.ioc_number' is then checked. The legal result is
saved to 'ioc'. Then, in condition MPT3COMMAND, the whole struct is fetched
again from the userspace. Then _ctl_do_mpt_command() is called, 'ioc' and
'karg' as inputs.

However, a malicious user can change the 'ioc_number' between the two
fetches, which will cause a potential security issues.  Moreover, a
malicious user can provide a valid 'ioc_number' to pass the check in first
fetch, and then modify it in the second fetch.

To fix this, we need to recheck the 'ioc_number' in the second fetch.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Acked-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:23 -04:00
Linus Torvalds d1cd7c85f9 SCSI misc on 20190507
This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
 hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas.  Plus number of minor
 changes, spelling fixes and other trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXNIK0yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbeFAP4wsOm6
 BNqDvLbF7gHAH+oSVAeENd9tepXG2xKbUHmLRgEA1wPaUxon8L8v/SSsqwewqMXP
 y6CnU6aO2iaViTNBsPs=
 =RX74
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
  hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
  changes, spelling fixes and other trivia"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits)
  scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
  scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
  scsi: qla2xxx: Fix hardirq-unsafe locking
  scsi: qla2xxx: Complain loudly about reference count underflow
  scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
  scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
  scsi: qla2xxx: Check the size of firmware data structures at compile time
  scsi: qla2xxx: Pass little-endian values to the firmware
  scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
  scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp()
  scsi: qla2xxx: Make qla24xx_async_abort_cmd() static
  scsi: qla2xxx: Remove unnecessary locking from the target code
  scsi: qla2xxx: Remove qla_tgt_cmd.released
  scsi: qla2xxx: Complain if a command is released that is owned by the firmware
  scsi: qla2xxx: target: Fix offline port handling and host reset handling
  scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
  scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
  scsi: qla2xxx: Simplify qlt_send_term_imm_notif()
  scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()
  scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
  ...
2019-05-08 10:12:46 -07:00
Martin K. Petersen 17631462cd Merge branch '5.1/scsi-fixes' into 5.2/merge
We have a few submissions for 5.2 that depend on fixes merged post
5.1-rc1. Merge the fixes branch into queue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:27:23 -04:00
Will Deacon fb24ea52f7 drivers: Remove explicit invocations of mmiowb()
mmiowb() is now implied by spin_unlock() on architectures that require
it, so there is no reason to call it from driver code. This patch was
generated using coccinelle:

	@mmiowb@
	@@
	- mmiowb();

and invoked as:

$ for d in drivers include/linux/qed sound; do \
spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done

NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation. If you've ended up bisecting to this commit, you can
reintroduce the mmiowb() calls using wmb() instead, which should restore
the old behaviour on all architectures other than some esoteric ia64
systems.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 12:01:02 +01:00
Colin Ian King ea9006dfda scsi: mpt3sas: fix indentation issue
There are a couple of statements that are incorrectly indented, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:02:14 -04:00
Sreekanth Reddy c2fe742ff6 scsi: mpt3sas: Fix kernel panic during expander reset
During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.

Reference of upstream discussion:

	https://patchwork.kernel.org/patch/10734933/

Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.

Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it.  By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.

Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.

Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25 21:53:48 -04:00
Suganath Prabu 4bcb298e60 scsi: mpt3sas: Update mpt3sas driver version to 28.100.00.00
Updated driver version to 28.100.00.00, which is equivalent to OOB Phase 9.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:44 -04:00
Suganath Prabu 288addd63b scsi: mpt3sas: Improve the threshold value and introduce module param
* Reduce the threshold value to 1/4 of the queue depth.

* With this FW can find enough entries to post the Reply Descriptors in the
  reply descriptor post queue.

* With module param, user can play with threshold value, the same
  irqpoll_weight is used as the budget in processing of reply descriptor
  post queues in _base_process_reply_queue.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:44 -04:00
Suganath Prabu 51e3b2ad6d scsi: mpt3sas: Load balance to improve performance and avoid soft lockups
Driver uses "reply descriptor post queues" in round robin fashion so that
IO's are distributed to all the available reply descriptor post queues
equally.  With this each reply descriptor post queue load is balanced.

This is enabled only if CPUs count to MSI-X vector count ratio is X:1
(where X > 1) This improves performance and also fixes soft lockups.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:43 -04:00
Suganath Prabu 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups
Issue Description:
We have seen cpu lock up issue from fields if system has greater (more than
96) logical cpu count.  SAS3.0 controller (Invader series) supports at max
96 msix vector and SAS3.5 product (Ventura) supports at max 128 msix
vectors.

This may be a generic issue (if PCI device supports completion on multiple
reply queues).  Let me explain it w.r.t to mpt3sas supported h/w just to
simplify the problem and possible changes to handle such issues. IT HBA
(mpt3sas) supports multiple reply queues in completion path. Driver creates
MSI-x vectors for controller as "min of (FW supported Reply queue, Logical
CPUs)". If submitter is not interrupted via completion on same CPU, there
is a loop in the IO path. This behavior can cause hard/soft CPU lockups, IO
timeout, system sluggish etc.

Example - one CPU (e.g. CPU A) is busy submitting the IOs and another CPU
(e.g. CPU B) is busy with processing the corresponding IO's reply
descriptors from reply descriptor queue upon receiving the interrupts from
HBA.  If the CPU A is continuously pumping the IOs then always CPU B (which
is executing the ISR) will see the valid reply descriptors in the reply
descriptor queue and it will be continuously processing those reply
descriptor in a loop without quitting the ISR handler.

Mpt3sas driver will exit ISR handler if it finds unused reply descriptor in
the reply descriptor queue. Since CPU A will be continuously sending the
IOs, CPU B may always see a valid reply descriptor (posted by HBA Firmware
after processing the IO) in the reply descriptor queue. In worst case,
driver will not quit from this loop in the ISR handler. Eventually, CPU
lockup will be detected by watchdog.

Above mentioned behavior is not common if "rq_affinity" set to 2 or
affinity_hint is honored by irqbalance as "exact". If rq_affinity is set
to 2, submitter will be always interrupted via completion on same CPU.  If
irqbalance is using "exact" policy, interrupt will be delivered to
submitter CPU.

If CPU counts to MSI-X vectors (reply descriptor Queues) count ratio is not
1:1, we still have exposure of issue explained above and for that we don't
have any solution.

Exposure of soft/hard lockup if CPU count is more than MSI-x supported by
device.

If CPUs count to MSI-x vectors count ratio is not 1:1, (Other way, if CPU
counts to MSI-x vector count ratio is something like X:1, where X > 1) then
'exact' irqbalance policy OR rq_affinity = 2 won't help to avoid CPU
hard/soft lockups. There won't be any one to one mapping between CPU to
MSI-x vector instead one MSI-x interrupt (or reply descriptor queue) is
shared with group/set of CPUs and there is a possibility of having a loop
in the IO path within that CPU group and may observe lockups.

For example: Consider a system having two NUMA nodes and each node having
four logical CPUs and also consider that number of MSI-x vectors enabled on
the HBA is two, then CPUs count to MSI-x vector count ratio as 4:1.  e.g.
MSIx vector 0 is affinity to CPU 0, CPU 1, CPU 2 & CPU 3 of NUMA node 0 and
MSI-x vector 1 is affinity to CPU 4, CPU 5, CPU 6 & CPU 7 of NUMA node 1.

numactl --hardware
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3                 --> MSI-x 0
node 0 size: 65536 MB
node 0 free: 63176 MB
node 1 cpus: 4 5 6 7                 -->MSI-x 1
node 1 size: 65536 MB
node 1 free: 63176 MB

Assume that user started an application which uses all the CPUs of NUMA
node 0 for issuing the IOs.  Only one CPU from affinity list (it can be any
cpu since this behavior depends upon irqbalance) CPU0 will receive the
interrupts from MSIx vector 0 for all the IOs. Eventually, CPU 0 IO
submission percentage will be decreasing and ISR processing percentage will
be increasing as it is more busy with processing the interrupts.  Gradually
IO submission percentage on CPU 0 will be zero and it's ISR processing
percentage will be 100 percentage as IO loop has already formed within the
NUMA node 0, i.e. CPU 1, CPU 2 & CPU 3 will be continuously busy with
submitting the heavy IOs and only CPU 0 is busy in the ISR path as it
always find the valid reply descriptor in the reply descriptor
queue. Eventually, we will observe the hard lockup here.

Chances of occurring of hard/soft lockups are directly proportional to
value of X. If value of X is high, then chances of observing CPU lockups is
high.

Solution: Use IRQ poll interface defined in " irq_poll.c".  mpt3sas driver
will execute ISR routine in Softirq context and it will always quit the
loop based on budget provided in IRQ poll interface.

In these scenarios (i.e. where CPUs count to MSI-X vectors count ratio is
X:1 (where X > 1)), IRQ poll interface will avoid CPU hard lockups due to
voluntary exit from the reply queue processing based on budget.  Note -
Only one MSI-x vector is busy doing processing.

Irqstat output:

IRQs / 1 second(s)
IRQ#  TOTAL  NODE0   NODE1   NODE2   NODE3  NAME
  44    122871   122871   0       0       0  IR-PCI-MSI-edge mpt3sas0-msix0
  45        0              0           0       0       0  IR-PCI-MSI-edge mpt3sas0-msix1

We use this approach only if cpu count is more than FW supported MSI-x
vector

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:43 -04:00
Suganath Prabu 233af108e5 scsi: mpt3sas: simplify interrupt handler
Separate out processing of reply descriptor post queue from _base_interrupt
to _base_process_reply_queue.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:43 -04:00
Suganath Prabu 2c063507c4 scsi: mpt3sas: Fix typo in request_desript_type
Fixed typo in request_desript_type.
request_desript_type --> request_descript_type.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18 17:16:43 -04:00
Gustavo A. R. Silva 7850b51b6c scsi: mpt3sas: Add missing breaks in switch statements
Fix the following warnings by adding the proper missing breaks:

drivers/scsi/mpt3sas/mpt3sas_base.c: In function  _base_display_OEMs_branding :
drivers/scsi/mpt3sas/mpt3sas_base.c:3548:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
    switch (ioc->pdev->subsystem_device) {
    ^~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3566:3: note: here
   case MPI2_MFGPAGE_DEVID_SAS2308_2:
   ^~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3567:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
    switch (ioc->pdev->subsystem_device) {
    ^~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3601:3: note: here
   case MPI25_MFGPAGE_DEVID_SAS3008:
   ^~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3735:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
    switch (ioc->pdev->subsystem_device) {
    ^~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3745:3: note: here
   case MPI2_MFGPAGE_DEVID_SAS2308_2:
   ^~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3746:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
    switch (ioc->pdev->subsystem_device) {
    ^~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:3768:3: note: here
   default:
   ^~~~~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-27 09:36:54 -05:00
Suganath Prabu S c6ded86a16 scsi: mpt3sas: Update driver version to 27.102.00.00
Updated driver version to 27.102.00.00 from 27.101.00.00.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04 22:52:21 -05:00
Suganath Prabu S eb9c7ce560 scsi: mpt3sas: Add support for ATLAS PCIe switch
Add Atlas PCIe Switch Management Port device PNPID,
Vendor Id: 0x1000
device Id: 0x00B2

This device is based on MPI 2.6 spec and it exposes one SES device to
accept management commands for the PCIe switch.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04 22:52:21 -05:00
Suganath Prabu S 8f8384503e scsi: mpt3sas: Add support for NVMe Switch Adapter
Added device ID for NVMe Switch Adapter (Ambrosia).
VID: 0x1000
DID: 0x02B1

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04 22:52:21 -05:00
Suganath Prabu S 1244790d17 scsi: mpt3sas: Rename mpi endpoint device ID macro.
MPI Endpoint is a PCIe switch based on MPI2.

Renaming device ID macro from MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP to
MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04 22:52:21 -05:00
Gustavo A. R. Silva a8cc10e232 scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where
we are expecting to fall through.

Addresses-Coverity-ID: 1475400 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20 19:48:07 -05:00
Stephan Günther 23c3828aa2 scsi: mpt3sas: fix memory ordering on 64bit writes
With commit 09c2f95ad4 ("scsi: mpt3sas: Swap I/O memory read value back
to cpu endianness"), 64bit writes in _base_writeq() were rewritten to use
__raw_writeq() instad of writeq().

This introduced a bug apparent on powerpc64 systems such as the Raptor
Talos II that causes the HBA to drop from the PCIe bus under heavy load and
being reinitialized after a couple of seconds.

It can easily be triggered on affacted systems by using something like

  fio --name=random-write --iodepth=4 --rw=randwrite --bs=4k --direct=0 \
    --size=128M --numjobs=64 --end_fsync=1
  fio --name=random-write --iodepth=4 --rw=randwrite --bs=64k --direct=0 \
    --size=128M --numjobs=64 --end_fsync=1

a couple of times. In my case I tested it on both a ZFS raidz2 and a btrfs
raid6 using LSI 9300-8i and 9400-8i controllers.

The fix consists in resembling the write ordering of writeq() by adding a
mandatory write memory barrier before device access and a compiler barrier
afterwards. The additional MMIO barrier is superfluous.

Signed-off-by: Stephan Günther <moepi@moepi.net>
Reported-by: Matt Corallo <linux@bluematt.me>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19 21:31:41 -05:00
Christoph Hellwig 2a3d4eb8e2 scsi: flip the default on use_clustering
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page.  Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Suganath Prabu ed4c1136ac scsi: mpt3sas: Update driver version to 27.101.00.00
Update driver version from 27.100.00.00 to 27.101.00.00.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 21:29:07 -05:00
Suganath Prabu 306eaf276b scsi: mpt3sas: Replace readl with ioc->base_readl
Use ioc->base_readl to restrict the readl retries to only Aero controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 21:29:07 -05:00
Suganath Prabu b899202901 scsi: mpt3sas: Add separate function for aero doorbell reads
Sometimes Aero controllers appears to be returning bad data (0) for
doorbell register read and if retries are performed immediately after the
bad read, they return good data.

Workaround is added to retry read from doorbell registers for maximum three
times if driver get the zero.  Added functions base_readl_aero for Aero IOC
and base_readl for gen35 and other controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 21:29:07 -05:00
Suganath Prabu cc68e6077b scsi: mpt3sas: Introduce flag for aero based controllers
Adding flag "is_aero_ioc" to differentiate aero based controllers from
other gen35 controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 21:29:07 -05:00
Colin Ian King 8700bc76f1 scsi: mpt3sas: fix spelling mistake "manufaucturing" -> "manufacturing"
There is a spelling mistake in some description text, fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 21:37:38 -05:00
Sreekanth Reddy 1c7a94e4aa scsi: mpt3sas: Display message on Configurable secure HBA
Display following warning message only upon detection of configurable
secure type controllers.

"HBA is in Configurable Secure mode"

[mkp: typos]

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-21 22:15:29 -05:00
Suganath Prabu 8dbb748d4d scsi: mpt3sas: Bump driver version to 27.100.00.00
Modify driver version to 27.100.00.00 (which is equivalent to PH8 OOB
driver)

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu 97f3519409 scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11
Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.

So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu 6cd1bc7b9b scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices
If EEDPTagMode field in manufacturing page11 is set then unset it. This is
needed to fix a hardware bug only in SAS3/SAS2 cards. So, skipping
EEDPTagMode changes in Manufacturing page11 for SAS 3.5 controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu 9029a72500 scsi: mpt3sas: Fix Sync cache command failure during driver unload
This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.

In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.

Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu dc730212e8 scsi: mpt3sas: Call sas_remove_host before removing the target devices
Call sas_remove_host() before removing the target devices in the driver's
.remove() callback function(i.e. during driver unload time).  So that
driver can provide a way to allow SYNC CACHE, START STOP unit commands
etc. (which are issued from SML) to the target drives during driver unload
time.

Once sas_remove_host() is called before removing the target drives then
driver can just clean up the resources allocated for target devices and no
need to call sas_port_delete_phy(), sas_port_delete() API's as these API's
internally called from sas_remove_host().

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu a064a6470b scsi: mpt3sas: Refactor mpt3sas_wait_for_ioc function
No functional change. Doing code refactor of function
mpt3sas_wait_for_ioc() for better readability.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu f4305749ca scsi: mpt3sas: Separate out mpt3sas_wait_for_ioc
No functional changes. This section of code "wait for IOC to be
operational" is used in many places across the driver.  Factor this code
out into a new mpt3sas_wait_for_ioc().

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu 02abcbc25a scsi: mpt3sas: Added new #define variable IOC_OPERATIONAL_WAIT_COUNT
Added new #define variable IOC_OPERATIONAL_WAIT_COUNT and it replaces hard
coded value '10' in all the places where driver is waiting for the IOC to
become operational.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu 6c2938f7bf scsi: mpt3sas: Add support for Aero controllers
Add support for Aero/Sea controllers and add warning for configurable
secure type IOC.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Suganath Prabu ff92b9dd92 scsi: mpt3sas: Update MPI headers to support Aero controllers
Updating MPI headers to the latest version 2.6.7 to add support to the
driver to detect the new 3816 and 3916 chip based controllers.  Separate
out firmware image data from mpi2_ioc.h to new file mpi2_image.h

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06 20:16:01 -05:00
Linus Torvalds d49f8a52b1 SCSI misc on 20181024
This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
 qla2xxx, lpfc, libsas, hisi_sas.  In addition there's a set of mostly
 small updates to the target subsystem a set of conversions to the
 generic DMA API, which do have some potential for issues in the older
 drivers but we'll handle those as case by case fixes. A new myrs for
 the DAC960/mylex raid controllers to replace the block based DAC960
 which is also being removed by Jens in this merge window. Plus the
 usual slew of trivial changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW9BQJSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU3MAP41T8yW
 UJQDCprj65pCR+9mOUWzgMvgAW/15ouK89x/7AD/XAEQZqoAgpFUbgnoZWGddZkS
 LykIzSiLHP4qeDOh1TQ=
 =2JMU
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
  qla2xxx, lpfc, libsas, hisi_sas.

  In addition there's a set of mostly small updates to the target
  subsystem a set of conversions to the generic DMA API, which do have
  some potential for issues in the older drivers but we'll handle those
  as case by case fixes.

  A new myrs driver for the DAC960/mylex raid controllers to replace the
  block based DAC960 which is also being removed by Jens in this merge
  window.

  Plus the usual slew of trivial changes"

[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
  wonder. There's also a "myrb" driver, where the 'b' stands for
  'block'. Truly, somebody has got mad naming skillz. - Linus ]

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
  scsi: myrs: Fix the processor absent message in processor_show()
  scsi: myrs: Fix a logical vs bitwise bug
  scsi: hisi_sas: Fix NULL pointer dereference
  scsi: myrs: fix build failure on 32 bit
  scsi: fnic: replace gross legacy tag hack with blk-mq hack
  scsi: mesh: switch to generic DMA API
  scsi: ips: switch to generic DMA API
  scsi: smartpqi: fully convert to the generic DMA API
  scsi: vmw_pscsi: switch to generic DMA API
  scsi: snic: switch to generic DMA API
  scsi: qla4xxx: fully convert to the generic DMA API
  scsi: qla2xxx: fully convert to the generic DMA API
  scsi: qla1280: switch to generic DMA API
  scsi: qedi: fully convert to the generic DMA API
  scsi: qedf: fully convert to the generic DMA API
  scsi: pm8001: switch to generic DMA API
  scsi: nsp32: switch to generic DMA API
  scsi: mvsas: fully convert to the generic DMA API
  scsi: mvumi: switch to generic DMA API
  scsi: mpt3sas: switch to generic DMA API
  ...
2018-10-25 07:40:30 -07:00
Christoph Hellwig 1c2048bdc3 scsi: mpt3sas: switch to generic DMA API
Switch from the legacy PCI DMA API to the generic DMA API.

Also simplify setting the DMA mask a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:58:52 -04:00
Nathan Chancellor b51d577a51 scsi: mpt3sas: Remove unnecessary parentheses and simplify null checks
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((ioc == NULL))
             ~~~~^~~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: remove extraneous
parentheses around the comparison to silence this warning
        if ((ioc == NULL))
            ~    ^      ~
drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: use '=' to turn this
equality comparison into an assignment
        if ((ioc == NULL))
                 ^~
                 =
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((pdev == NULL))
             ~~~~~^~~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: remove extraneous
parentheses around the comparison to silence this warning
        if ((pdev == NULL))
            ~     ^      ~
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: use '=' to turn this
equality comparison into an assignment
        if ((pdev == NULL))
                  ^~
                  =
2 warnings generated.

Remove them and while we're at it, simplify the NULL checks as '!var' is
used more than 'var == NULL'.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:07:49 -04:00
Souptick Joarder c39a4d7553 scsi: mpt3sas: Use dma_pool_zalloc
Replaced dma_pool_alloc + memset with dma_pool_zalloc.

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:04:36 -04:00
Joe Perches 16e8b9631a scsi: mpt3sas: Remove unused macro MPT3SAS_FMT
All the uses have been removed, delete the macro.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:44 -04:00
Joe Perches 1f95a47eec scsi: mpt3sas: Convert logging uses with MPT3SAS_FMT without logging levels
Convert these uses to ioc_<level> where appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:44 -04:00
Joe Perches 506f7f6b26 scsi: mpt3sas: Remove KERN_WARNING from panic uses
Remove the logging level as panic calls stop the machine and should always be
emitted regardless of requested logging level.

These existing panic uses are perhaps inappropriate.

Miscellanea:

o Coalesce formats and convert MPT3SAS_FMT to "%s: " to improve clarity

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:44 -04:00
Joe Perches fc7d510ec4 scsi: mpt3sas: Convert logging uses with MPT3SAS_FMT and reply_q_name to %s:
Convert the existing 2 uses to make the format and arguments matching more
obvious.

Miscellanea:

o Move the word "enabled" into the format to trivially reduce object size
o Remove unnecessary parentheses

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:43 -04:00
Joe Perches 4dc74b2eb9 scsi: mpt3sas: Convert mlsleading uses of pr_<level> with MPT3SAS_FMT
These have misordered uses of __func__ and ioc->name that could mismatch
MPT3SAS_FMT and "%s: ".

Convert them to ioc_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:43 -04:00
Joe Perches 919d8a3f3f scsi: mpt3sas: Convert uses of pr_<level> with MPT3SAS_FMT to ioc_<level>
Use a more common logging style.

Done using the perl script below and some typing

$ git grep --name-only -w MPT3SAS_FMT -- "*.c" | \
  xargs perl -i -e 'local $/; while (<>) { s/\bpr_(info|err|notice|warn)\s*\(\s*MPT3SAS_FMT\s*("[^"]+"(?:\s*\\?\s*"[^"]+"\s*){0,5}\s*),\s*ioc->name\s*/ioc_\1(ioc, \2/g; print;}'

Miscellanea for these conversions:

o Coalesce formats
o Realign arguments
o Remove unnecessary parentheses
o Use casts to u64 instead of unsigned long long where appropriate
o Convert broken pr_info uses to pr_cont
o Fix broken format string concatenation with line continuations and
  excess whitespace

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:43 -04:00
Joe Perches 645a20c682 scsi: mpt3sas: Add ioc_<level> logging macros
These macros can help identify specific logging uses and eventually perhaps
reduce object sizes.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10 22:00:43 -04:00
Oza Pawandeep 62b36c3ea6 PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
After bfcb79fca1 ("PCI/ERR: Run error recovery callbacks for all affected
devices"), AER errors are always cleared by the PCI core and drivers don't
need to do it themselves.

Remove calls to pci_cleanup_aer_uncorrect_error_status() from device
driver error recovery functions.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, remove PCI core changes, remove unused variables]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02 16:04:40 -05:00
Linus Torvalds 72f02ba66b SCSI misc on 20180815
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
 hisi_sas, smartpqi, megaraid_sas, arcmsr.  In addition, with the
 continuing absence of Nic we have target updates for tcmu and target
 core (all with reviews and acks).  The biggest observable change is
 going to be that we're (again) trying to switch to mulitqueue as the
 default (a user can still override the setting on the kernel command
 line).  Other major core stuff is the removal of the remaining
 Microchannel drivers, an update of the internal timers and some
 reworks of completion and result handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
 dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
 o/JckEZZpIp+5NySZNc=
 =ggLB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...
2018-08-15 22:06:26 -07:00
Linus Torvalds 73ba2fb33c for-4.19/block-20180812
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAltwvasQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpv65EACTq5gSLnJBI6ZPr1RAHruVDnjfzO2Veitl
 tUtjm0XfWmnEiwQ3dYvnyhy99xbyaG3900d9BClCTlH6xaUdSiQkDpcKG/R2F36J
 5mZitYukQcpFAQJWF8YKsTTE7JPl4VglCIDqYiC4+C3rOSVi8lrKn2qp4J4MMCFn
 thRg3jCcq7c5s9Eigsop1pXWQSasubkXfk55Krcp4oybKYpYRKXXf74Mj14QAbwJ
 QHN3VisyAUWoBRg7UQZo1Npe2oPk6bbnJypnjf8M0M2EnlvddEkIlHob91sodka8
 6p4APOEu5cbyXOBCAQsw/koff14mb8aEadqeQA68WvXfIdX9ZjfxCX0OoC3sBEXk
 yqJhZ0C980AM13zIBD8ejv4uasGcPca8W+47mE5P8sRiI++5kBsFWDZPCtUBna0X
 2Kh24NsmEya9XRR5vsB84dsIPQ3tLMkxg/IgQRVDaSnfJz0c/+zm54xDyKRaFT4l
 5iERk2WSkm9+8jNfVmWG0edrv6nRAXjpGwFfOCPh6/LCSCi4xQRULYN7sVzsX8ZK
 FRjt24HftBI8mJbh4BtweJvg+ppVe1gAk3IO3HvxAQhv29Hz+uvFYe9kL+3N8LJA
 Qosr9n9O4+wKYizJcDnw+5iPqCHfAwOm9th4pyedR+R7SmNcP3yNC8AbbheNBiF5
 Zolos5H+JA==
 =b9ib
 -----END PGP SIGNATURE-----

Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "First pull request for this merge window, there will also be a
  followup request with some stragglers.

  This pull request contains:

   - Fix for a thundering heard issue in the wbt block code (Anchal
     Agarwal)

   - A few NVMe pull requests:
      * Improved tracepoints (Keith)
      * Larger inline data support for RDMA (Steve Wise)
      * RDMA setup/teardown fixes (Sagi)
      * Effects log suppor for NVMe target (Chaitanya Kulkarni)
      * Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
      * TP4004 (ANA) support (Christoph)
      * Various NVMe fixes

   - Block io-latency controller support. Much needed support for
     properly containing block devices. (Josef)

   - Series improving how we handle sense information on the stack
     (Kees)

   - Lightnvm fixes and updates/improvements (Mathias/Javier et al)

   - Zoned device support for null_blk (Matias)

   - AIX partition fixes (Mauricio Faria de Oliveira)

   - DIF checksum code made generic (Max Gurtovoy)

   - Add support for discard in iostats (Michael Callahan / Tejun)

   - Set of updates for BFQ (Paolo)

   - Removal of async write support for bsg (Christoph)

   - Bio page dirtying and clone fixups (Christoph)

   - Set of bcache fix/changes (via Coly)

   - Series improving blk-mq queue setup/teardown speed (Ming)

   - Series improving merging performance on blk-mq (Ming)

   - Lots of other fixes and cleanups from a slew of folks"

* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
  blkcg: Make blkg_root_lookup() work for queues in bypass mode
  bcache: fix error setting writeback_rate through sysfs interface
  null_blk: add lock drop/acquire annotation
  Blk-throttle: reduce tail io latency when iops limit is enforced
  block: paride: pd: mark expected switch fall-throughs
  block: Ensure that a request queue is dissociated from the cgroup controller
  block: Introduce blk_exit_queue()
  blkcg: Introduce blkg_root_lookup()
  block: Remove two superfluous #include directives
  blk-mq: count the hctx as active before allocating tag
  block: bvec_nr_vecs() returns value for wrong slab
  bcache: trivial - remove tailing backslash in macro BTREE_FLAG
  bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
  bcache: set max writeback rate when I/O request is idle
  bcache: add code comments for bset.c
  bcache: fix mistaken comments in request.c
  bcache: fix mistaken code comments in bcache.h
  bcache: add a comment in super.c
  bcache: avoid unncessary cache prefetch bch_btree_node_get()
  bcache: display rate debug parameters to 0 when writeback is not running
  ...
2018-08-14 10:23:25 -07:00
Sreekanth Reddy e70183143c scsi: mpt3sas: Fix calltrace observed while running IO & reset
Below kernel BUG was observed while running IOs with host reset (issued
from application),

mpt3sas_cm0: diag reset: SUCCESS
------------[ cut here ]------------
WARNING: CPU: 12 PID: 4336 at drivers/scsi/mpt3sas/mpt3sas_base.c:3282 mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
 dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G        W      ------------   3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
Call Trace:
 [<ffffffff9cf16583>] dump_stack+0x19/0x1b
 [<ffffffff9c891698>] __warn+0xd8/0x100
 [<ffffffff9c8917dd>] warn_slowpath_null+0x1d/0x20
 [<ffffffffc04f3f4d>] mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
 [<ffffffffc05047d2>] _scsih_flush_running_cmds+0x92/0xe0 [mpt3sas]
 [<ffffffffc05095db>] mpt3sas_scsih_reset_handler+0x43b/0xaf0 [mpt3sas]
 [<ffffffff9c894829>] ? vprintk_default+0x29/0x40
 [<ffffffff9cf10531>] ? printk+0x60/0x77
 [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
 [<ffffffffc04f794d>] mpt3sas_base_hard_reset_handler+0x1ad/0x420 [mpt3sas]
 [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
 [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
 [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
 [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
---[ end trace 5dac5b98d89aaa3c ]---
------------[ cut here ]------------
kernel BUG at block/blk-core.c:1476!
invalid opcode: 0000 [#1] SMP
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
 dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G        W      ------------   3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
task: ffff903fc96e0fd0 ti: ffff903fb1eec000 task.ti: ffff903fb1eec000
RIP: 0010:[<ffffffff9cb19ec0>]  [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
RSP: 0018:ffff903c6b783dc0  EFLAGS: 00010087
RAX: ffff903bb67026d0 RBX: ffff903b7d6a6140 RCX: dead000000000200
RDX: ffff903bb67026d0 RSI: ffff903bb6702580 RDI: ffff903bb67026d0
RBP: ffff903c6b783dd8 R08: ffff903bb67026d0 R09: ffffd97e80000000
R10: ffff903c658bac00 R11: 0000000000000000 R12: ffff903bb6702580
R13: ffff903fa9a292f0 R14: 0000000000000246 R15: 0000000000001057
FS:  00007f7026f5b740(0000) GS:ffff903c6b780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f298877c004 CR3: 00000000caf36000 CR4: 00000000000607e0
Call Trace:
 <IRQ>
 [<ffffffff9cca68ff>] __scsi_queue_insert+0xbf/0x110
 [<ffffffff9cca79ca>] scsi_io_completion+0x5da/0x6a0
 [<ffffffff9cc9ca3c>] scsi_finish_command+0xdc/0x140
 [<ffffffff9cca6aa2>] scsi_softirq_done+0x132/0x160
 [<ffffffff9cb240c6>] blk_done_softirq+0x96/0xc0
 [<ffffffff9c89a905>] __do_softirq+0xf5/0x280
 [<ffffffff9cf2bd2c>] call_softirq+0x1c/0x30
 [<ffffffff9c82d625>] do_softirq+0x65/0xa0
 [<ffffffff9c89ac85>] irq_exit+0x105/0x110
 [<ffffffff9cf2d0a8>] smp_apic_timer_interrupt+0x48/0x60
 [<ffffffff9cf297f2>] apic_timer_interrupt+0x162/0x170
 <EOI>
 [<ffffffff9cca5f41>] ? scsi_done+0x21/0x60
 [<ffffffff9cb5ac18>] ? delay_tsc+0x38/0x60
 [<ffffffff9cb5ab5d>] __const_udelay+0x2d/0x30
 [<ffffffffc04effde>] _base_handshake_req_reply_wait+0x8e/0x4a0 [mpt3sas]
 [<ffffffffc04f0b13>] _base_get_ioc_facts+0x123/0x590 [mpt3sas]
 [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
 [<ffffffffc04f7993>] mpt3sas_base_hard_reset_handler+0x1f3/0x420 [mpt3sas]
 [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
 [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
 [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
 [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
Code: 83 c3 10 4c 89 e2 4c 89 ee e8 8d 21 04 00 48 8b 03 48 85 c0 75 e5 41 f6 44 24 4a 10 74 ad 4c 89 e6 4c 89 ef e8 b2 42 00 00 eb a0 <0f> 0b 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
RIP  [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
 RSP <ffff903c6b783dc0>

As a part of host reset operation, driver will flushout all IOs outstanding
at driver level with "DID_RESET" result.  To find which are all commands
outstanding at the driver level, driver loops with smid starting from one
to HBA queue depth and calls mpt3sas_scsih_scsi_lookup_get() to get scmd as
shown below

 for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
                scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
                if (!scmd)
                        continue;

But in mpt3sas_scsih_scsi_lookup_get() function, driver returns some scsi
cmnds which are not outstanding at the driver level (possibly request is
constructed at block layer since QUEUE_FLAG_QUIESCED is not set. Even if
driver uses scsi_block_requests and scsi_unblock_requests, issue still
persists as they will be just blocking further IO from scsi layer and not
from block layer) and these commands are flushed with DID_RESET host bytes
thus resulting into above kernel BUG.

This issue got introduced by commit dbec4c9040 ("scsi: mpt3sas: lockless
command submission").

To fix this issue, we have modified the mpt3sas_scsih_scsi_lookup_get() to
check for smid equals to zero (note: whenever any scsi cmnd is processing
at the driver level then smid for that scsi cmnd will be non-zero, always
it starts from one) before it returns the scmd pointer to the caller. If
smid is zero then this function returns scmd pointer as NULL and driver
won't flushout those scsi cmnds at driver level with DID_RESET host byte
thus this issue will not be observed.

[mkp: amended with updated fix from Sreekanth]

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: dbec4c9040 ("scsi: mpt3sas: lockless command submission")
Cc: stable@vger.kernel.org # v4.16+
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-08 21:26:47 -04:00
Sreekanth Reddy 09c2f95ad4 scsi: mpt3sas: Swap I/O memory read value back to cpu endianness
Swap the I/O memory read value back to cpu endianness before storing it in
a data structures which are defined in the MPI headers where u8 components
are not defined in the endianness order.

In this area from day one mpt3sas driver is using le32_to_cpu() &
cpu_to_le32() APIs. But in commit cf6bf9710c
(mpt3sas: Bug fix for big endian systems) we have removed these APIs
before reading I/O memory which we should haven't done it. So
in this patch I am correcting it by adding these APIs back
before accessing I/O memory.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-03 13:52:23 -04:00
Max Gurtovoy ddd0bc7569 block: move ref_tag calculation func to the block layer
Currently this function is implemented in the scsi layer, but it's
actual place should be the block layer since T10-PI is a general
data integrity feature that is used in the nvme protocol as well.

Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-30 08:27:01 -06:00
Chaitra P B b15c9fd8bb scsi: mpt3sas: Fix for regression caused by sparse cleanups
Commit cf6bf9710c ("scsi: mpt3sas: Bug fix for big endian systems") was
merged to address sparse warnings. However, the patch introduced a
regression on big endian since the code accidentally mixed I/O memory
accessors, which do endian swaps, and regular CPU loads and stores.

Do a partial revert of the offending commit.

[mkp: replaced commit message]

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-12 22:40:03 -04:00
Ming Lei c84b023a4c scsi: read host_busy via scsi_host_busy()
No functional change.

Just introduce scsi_host_busy() and replace the direct read of
scsi_host->host_busy with this new API.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:53:26 -04:00
Bart Van Assche 4beb4867f0 scsi: mpt3sas: Improve kernel-doc headers
Avoids that warnings about the kernel headers appear when building with
W=1. Remove useless "@Returns - Nothing" clauses. Change "@Return - " into
"Return: ".

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche c7a3570588 scsi: mpt3sas: Split _base_reset_handler(), mpt3sas_scsih_reset_handler() and mpt3sas_ctl_reset_handler()
Split each of these functions in three functions - one function per reset
phase. This patch does not change any functionality but makes the code
easier to read.

Note: it is much easier to review the git diff -w output after having
applied this patch than by reviewing the patch itself.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche 982ea6f9ff scsi: mpt3sas: Fix a race condition in mpt3sas_base_hard_reset_handler()
Since ioc->shost_recovery is set after ioc->reset_in_progress_mutex is
obtained, if concurrent resets are issued there is a short time during
which ioc->reset_in_progress_mutex is locked and ioc->shost_recovery ==
0. Avoid that this can cause trouble by unconditionally locking
ioc->shost_recovery.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche 91b7bdb2c0 scsi: mpt3sas: Fix _transport_smp_handler() error path
This patch avoids that smatch complains about a double unlock on
ioc->transport_cmds.mutex.

Fixes: 651a013649 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche 84203b3561 scsi: mpt3sas: Introduce struct mpt3sas_nvme_cmd
Make _base_build_nvme_prp() easier to read by introducing a structure
to access NVMe command fields.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche eb0c7af26b scsi: mpt3sas: Annotate switch/case fall-through
This patch avoids that gcc complains about switch/case fall-through
when building with W=1.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche 7d1207288f scsi: mpt3sas: Remove set-but-not-used variables
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Bart Van Assche 199fd79a11 scsi: mpt3sas: Fix indentation
Modify the indentation such that smatch no longer complains about
inconsistent indenting.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19 22:02:25 -04:00
Chaitra P B 2cd4bf89f7 scsi: mpt3sas: Update driver version "26.100.00.00"
Updated driver version to "26.100.00.00"

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Chaitra P B 2b48be6568 scsi: mpt3sas: As per MPI-spec, use combined reply queue for SAS3.5 controllers when HBA supports more than 16 MSI-x vectors.
Presently driver is using combined reply queue feature when MSI-x vectors >
8 for both SAS3 and SAS3.5 controllers.  But as per MPI-spec,

1. For SAS3 controllers, driver should use combined reply queue when HBA
supports more than 8 MSI-x vectors.

2. For SAS3.5 controllers, driver should use combined reply queue when HBA
supports more than 16 MSI-x vectors.

Modified driver code to use combined reply queue for SAS3 controllers when
HBA supports > 8 MSI-x vectors and for SAS3.5 controllers when HBA supports
> 16 MSI-x vectors.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Chaitra P B d37306ca0e scsi: mpt3sas: Fix, False timeout prints for ioctl and other internal commands during controller reset.
When an ioctl is sent to FW, and if there is a controller reset issued
before ioctl gets completed, then in controller reset path all the pending
ioctl commands are terminated from "mpt3sas_ctl_reset_handler" function.
This will wake up the waiting ioctl commands in ioctl path and print
timeouts which are actually not timeouts.

Introduced "mpt3sas_base_check_cmd_timeout" function to check and print
whether command got timed out (or) terminated due to Host reset.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Chaitra P B 20a044332d scsi: mpt3sas: Don't access the structure after decrementing it's instance reference count.
While configuring of NVMe device handling, _pcie_device structure member
was accessed after its reference count is decremented/put. Hence modified
code to access member of _pcie_device structure before its reference count
is decremented/put.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Chaitra P B e3586147b8 scsi: mpt3sas: Incorrect command status was set/marked as not used.
In _scsih_scan_finished driver should mark port_enable_cmd.status as
'command not used', instead base_cmds.status was marked as 'command not
used'. Update code to mark port_enable_cmd.status as 'command not used'.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Chaitra P B 999c85134d scsi: mpt3sas: Don't abort I/Os issued to NVMe drives while processing Async Broadcast primitive event.
Linux driver when receives Broadcast Asynchronous Event Notification (BAEN)
from the controller firmware, checks all pending I/Os at the driver level
and issues query task, abort task TMs. This is done in the driver to handle
drives which are connected with multiple initiators and undergoing target
resets. In the BAEN handling code, the I/Os issued to NVMe drives are also
handled and query task and abort task TMs are issued, which are not
necessary as there is no multi-initiator and no BAEN concept with NVMe
drives. Hence when the driver checks for pending I/Os it skips NVMe drives
at this moment.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18 21:05:32 -04:00
Linus Torvalds 2837461dbe SCSI fixes on 20180613
This is a set of minor (and safe changes) that didn't make the initial
 pull request plus some bug fixes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWyHBVCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTkjAPoDF71y
 5+w0pim7HQvyo02GxKRWyYzkibZsTfNQ49Yo6wD9EhKp1OD4TIrO1ey3fHpCcYry
 CHfUIClnev6hiqDBDrI=
 =xJ+K
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of minor (and safe changes) that didn't make the initial
  pull request plus some bug fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Mask off Scope bits in retry delay
  scsi: qla2xxx: Fix crash on qla2x00_mailbox_command
  scsi: aic7xxx: aic79xx: fix potential null pointer dereference on ahd
  scsi: mpt3sas: Add an I/O barrier
  scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails
  scsi: hpsa: disable device during shutdown
  scsi: sd_zbc: Fix sd_zbc_check_zone_size() error path
  scsi: aacraid: remove bogus GFP_DMA32 specifies
2018-06-14 16:35:32 +09:00
Tomas Henzl 10ee1f2206 scsi: mpt3sas: Add an I/O barrier
A barrier should be added to ensure proper ordering of memory mapped
writes.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-05 21:24:34 -04:00
Chaitra P B f6972d7180 scsi: mpt3sas: Update driver version "25.100.00.00"
Update driver version to match OOB/internal driver version.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:40:05 -04:00
Chaitra P B 87b3576e9e scsi: mpt3sas: fix possible memory leak.
In ioctl exit path driver refers ioc_list to free memory associated with
diag buffers and event_log pointer used to save events by driver.
If ctl_exit() func is called after unregistering driver, then ioc_list will
be empty and hence driver will not be able to free the allocated memory
which in turn causes memory leak.
So call ctl_exit() function before unregistering mpt3sas driver.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:40:05 -04:00
Chaitra P B c1a6c5ac42 scsi: mpt3sas: For NVME device, issue a protocol level reset
1) Manufacturing Page 11 contains parameters to control internal
   firmware behavior. Based on AddlFlags2 field FW/Driver behaviour can
   be changed, (flag tm_custom_handling is used for this)

a) For PCIe device, protocol level reset should be used if flag
   tm_custom_handling is 0.  Since Abort Task Set, LUN reset and Target
   reset will result in a protocol level reset. Drivers should issue
   only one type of this reset, if that fails then it should escalate to
   a controller reset (diag reset/OCR).

b) If the driver has control over the TM reset timeout value, then
   driver should use the value exposed in PCIe Device Page 2 for pcie
   device (field ControllerResetTO).

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:39:49 -04:00
Chaitra P B 65928d1f41 scsi: mpt3sas: Update MPI Headers
Update MPI Files to support protocol level reset for NVMe device.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B 3d29ed85fc scsi: mpt3sas: Report Firmware Package Version from HBA Driver.
Added function _base_display_fwpkg_version, which sends FWUpload request
to pull FW package version from FW Image Header.  Now driver prints FW
package version in addition to FW version if the PackageVersion is
valid.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B 22a923c315 scsi: mpt3sas: Cache enclosure pages during enclosure add.
In function _scsih_add_device, for each device connected to an
enclosure, driver reads the enclosure page(To get details like enclosure
handle, enclosure logical ID, enclosure level etc.)

With this patch, instead of reading enclosure page everytime, driver
maintains a list for enclosure device(During enclosure add event,
enclosure device is added to the list and removed from the list on
delete events) and uses the enclosure page from the list.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B 79eb96d6ca scsi: mpt3sas: Allow processing of events during driver unload.
Events were not processed during driver unload, hence unloading of
driver doesn't complete when drives are disconnected while unloading of
driver.  So don't block events in ISR path, i,e., remove the flag
ioc->remove_host so that events are getting processed during driver
unload.  Thus allowing driver unload to complete by processing drive
removal events during driver unload.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B 1537d1bfc5 scsi: mpt3sas: Increase event log buffer to support 24 port HBA's.
For 24 port HBA's events generated by IOC are more in certain cases and
the current circular buffer may be overwritten.Hence increased the event
log buffer to accommodate more events.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B 95540b8eaf scsi: mpt3sas: Added support for SAS Device Discovery Error Event.
The SAS Device Discovery Error Event is sent to the host when discovery
for a particular device is failed during discovery, even after maximum
retries by the IOC.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B e21fef6f33 scsi: mpt3sas: Enhanced handling of Sense Buffer.
Enhanced DMA allocation for Sense Buffer, if the allocation does not fit
within same 4GB.Introduced is_MSB_are_same function to check if allocted
buffer within 4GB range or not.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B 74522a92bb scsi: mpt3sas: Optimize I/O memory consumption in driver.
For every IO, memory of PAGE size is allocated for handling NVMe native
PRPS. And in addition to that for every IO (chains need per IO * chain
buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain
buffers.

However, at any point of time; the IO request can be for NVMe target
device (where PRP's page is used for framing PRP's) or can be for SCSI
target device (where chain buffers are used for framing chain
SGE's). This patch modifies the driver to reuse same pre-allocated PRP
page buffers as a chain buffer for IO's targeted for SCSI target
devices. No need to allocate separate buffers for chain SGE's buffers.

Suppose if the number of chain buffers need for IO doesn't fit in the
PRP Page size then driver maintain's separate buffers for those extra
chain buffers that exceeds the PRP page size. For example consider PRP
page size as 4K and chain buffer size as 128 bytes, then number of chain
buffers that can fit in PRP page is 4096/128 => 32. if the number of
chain buffer need per IO exceeds 32; for example consider number of
chains need per IO is 36 then for remaining 4 chain buffer's driver
allocates them individual.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B 93204b782a scsi: mpt3sas: Lockless access for chain buffers.
Introduces Chain lookup table/tracker and implements accessing chain
buffer using smid.  Removed link list based access of chain buffer which
requires lock and allocated as many chains needed.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B cd33223b59 scsi: mpt3sas: Pre-allocate RDPQ Array at driver boot time.
Instead of allocating RDPQ array (This stores the address's of each RDPQ
pools) at run time, now it will be allocated once during driver load
time and same will be reused during host reset operation also (instead
of allocating & freeing this buffer on the fly during every host reset
operation) and then freed during driver unload.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B cf6bf9710c scsi: mpt3sas: Bug fix for big endian systems.
This patch fixes sparse warnings and bugs on big endian systems.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00