Commit Graph

75 Commits

Author SHA1 Message Date
Marc Gonzalez 619f6fc390 media: si2168: Refactor command setup code
Use cmd_init() to fill a struct si2168_cmd command.

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-21 18:39:54 -03:00
Jan Pieter van Woerkom bc28d36bf1 media: si2168: add support for Mygica T230C v2
The T230C v2 hardware needs a mode of the si2168 chip to be
set for which the si2168 driver previously had no support.
This patch uses a specific measure to configure this on the
T230C v2 hardware only - see the flag passed via the ts_mode
attribute and its dependency on USB_PID_MYGICA_T230C2.

Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-22 15:30:28 -04:00
Mauro Carvalho Chehab 5800571960 Linux 5.2-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
 4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
 dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
 ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
 DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
 g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
 XCMhQ9s=
 =cb80
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc4' into media/master

There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.

So, let's merge back from upstream and address those.

Linux 5.2-rc4

* tag 'v5.2-rc4': (767 commits)
  Linux 5.2-rc4
  MAINTAINERS: Karthikeyan Ramasubramanian is MIA
  i2c: xiic: Add max_read_len quirk
  lockref: Limit number of cmpxchg loop retries
  uaccess: add noop untagged_addr definition
  x86/insn-eval: Fix use-after-free access to LDT entry
  kbuild: use more portable 'command -v' for cc-cross-prefix
  s390/unwind: correct stack switching during unwind
  block, bfq: add weight symlink to the bfq.weight cgroup parameter
  cgroup: let a symlink too be created with a cftype file
  drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
  drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
  drm/nouveau/secboot: split out FW version-specific LS function pointers
  drm/nouveau/secboot: pass max supported FW version to LS load funcs
  drm/nouveau/core: support versioned firmware loading
  drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
  block: free sched's request pool in blk_cleanup_queue
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11 12:09:28 -04:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Brad Love 4a0bbf4815 media: si2168: add frequency data to frontend info
Minimum, maximum, and stepsize taken from Silicon Labs reference.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21 09:06:14 -04:00
Mauro Carvalho Chehab fce61d1dfd media: si2168: fix a comment about firmware version
There's a comment there at s82168 that it is wrong.

With firmware 4.0.11, sleep/resume works well without
need of download it every time. But firmware 4.0.19
needs to be downloaded again after sleep.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-08 06:06:49 -05:00
Brad Love 1844f49861 media: si2168: change ts bus control logic
Move the ts bus control function moved higher, enabling it
after configuring frontend and removeing ts_bus_ctrl callback.

While here, also add an error checking and re-add a comment
that were removed by commit 445877742c ("media: si2168:
Add ts bus coontrol, turn off bus on sleep").

[mchehab@s-opensource.com: I ended by applying the first version,
 instead of the right one. So, this patch contains the diff and
 the v2 changelog instead]

Fixes: 445877742c ("media: si2168: Add ts bus coontrol, turn off bus on sleep")

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 09:12:32 -05:00
Brad Love d4c779bc91 media: si2168: Add spectrum inversion property
Some tuners produce inverted spectrum, but the si2168 is not
currently set up to accept it. This adds an optional parameter
to set the frontend up to receive inverted spectrum.

Parameter is optional and only boards who enable inversion
will utilize this.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:40:14 -05:00
Brad Love 3061df060f media: si2168: Announce frontend creation failure
The driver outputs on success, but is silent on failure. Give
one message that probe failed.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:26:11 -05:00
Brad Love 445877742c media: si2168: Add ts bus coontrol, turn off bus on sleep
Includes a function to set TS MODE property os si2168. The function
either disables the TS output bus, or sets mode to config option.

When going to sleep the TS bus is turned off, this makes the driver
compatible with multiple frontend usage.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06 07:25:31 -05:00
Ron Economos 380a6c8645 media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.

Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.

Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 12:22:23 -05:00
Markus Elfring c38e8657a4 media: drivers: delete error messages for failed memory allocation
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

[mchehab@s-opensource.com: fold several similar patches into one]

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-23 08:19:55 -04:00
Evgeny Plehov 50d6446207 [media] si2168: Si2168-D60 support
Support for new demod version.

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-03 08:39:48 -03:00
Antti Palosaari c62d29c817 [media] si2168: implement ucb statistics
Implement DVBv5 UCB. Only uncorrected blocks are currently counted.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 10:26:52 -02:00
Antti Palosaari 8393c00369 [media] si2168: implement ber statistics
Implement DVBv5 BER.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 10:26:23 -02:00
Antti Palosaari e06be1da13 [media] si2168: do not allow driver unbind
Disable runtime unbind as driver does not support it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:54:28 -03:00
Antti Palosaari 6ab1e9438a [media] si2168: add support for newer firmwares
Si2168-B40 firmware API has changed somewhere between 4.0-11 and
4.0-19 so that sleep will lose firmware upgrade from the chip. Due
to that firmware re-upload is needed when newer firmwares are used.

Rewrote firmware handling logic partly at the same.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:53:55 -03:00
Antti Palosaari e6d7ffcdf1 [media] si2168: change the i2c gate to be mux-locked
The root i2c adapter lock is then no longer held by the i2c mux during
accesses behind the i2c gate, and such accesses need to take that lock
just like any other ordinary i2c accesses do.

So, declare the i2c gate mux-locked, and zap the code that makes the
i2c accesses unlocked. But add a mutex so that firmware commands are
still serialized.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-04 22:39:31 +02:00
Peter Rosin 58d7b541dd [media] si2168: convert to use an explicit i2c mux core
Allocate an explicit i2c mux core to handle parent and child adapters
etc. Update the select/deselect ops to be in terms of the i2c mux core
instead of the child adapter.

Tested-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-22 15:00:16 +02:00
Laura Abbott 47810b4341 [media] si2168: Bounds check firmware
When reading the firmware and sending commands, the length must
be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the expected
format:

si2168 11-0064: found a 'Silicon Labs Si2168-B40'
si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 11-0064: firmware download failed -95
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f

Add the proper check.

Cc: stable@kernel.org
Reported-by: Stuart Auchterlonie <sauchter@redhat.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22 15:48:25 -02:00
Krzysztof Kozlowski 04d8be053f [media] dvb-frontends: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 12:58:20 -03:00
Mauro Carvalho Chehab 0df289a209 [media] dvb: Get rid of typedev usage for enums
The DVB API was originally defined using typedefs. This is against
Kernel CodingStyle, and there's no good usage here. While we can't
remove its usage on userspace, we can avoid its usage in Kernelspace.

So, let's do it.

This patch was generated by this shell script:

	for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done

While here, make CodingStyle fixes on the affected lines.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-09 17:47:35 -03:00
Antti Palosaari d2b72f6482 [media] si2168: Implement own I2C adapter locking
We need own I2C locking because of tuner I2C adapter/repeater.
Firmware command is executed using I2C send + reply message. Default
I2C adapter locking protects only single I2C operation, not whole
send + reply sequence as needed. Due to that, it was possible tuner
I2C message interrupts firmware command sequence.

Reported-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:32:05 -03:00
Olli Salonen 7adf99d20c [media] si2168: add I2C error handling
Return error from si2168_cmd_execute in case the demodulator returns an
error.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:19:26 -03:00
Olli Salonen 8117a3121d [media] si2168: add support for gapped clock
Add a parameter in si2168_config to support gapped clock. This might be
necessary on some devices with higher bitrates.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:16:37 -03:00
Olli Salonen 17d4d6ae09 [media] si2168: add support for 1.7MHz bandwidth
This patch is based on Antti's silabs branch.

Add support for 1.7 MHz bandwidth. Supported in all versions of Si2168 according to short data sheets.

[mchehab@osg.samsung.com: Fix CodingStyle]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03 18:13:12 -02:00
Olli Salonen 683e98b602 [media] si2168: return error if set_frontend is called with invalid parameters
This patch should is based on Antti's silabs branch.

According to dvb-frontend.h set_frontend may be called with bandwidth_hz set to 0 if automatic bandwidth is required. Si2168 does not support automatic bandwidth and does not declare FE_CAN_BANDWIDTH_AUTO in caps.

This patch will change the behaviour in a way that EINVAL is returned if bandwidth_hz is 0.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03 18:12:46 -02:00
Antti Palosaari c32b281628 [media] si2168: change firmware variable name and type
Rename firmware variable from fw_file to fw_name and change its type
from u8 to const char as request_firmware() input defines.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:46:05 -02:00
Antti Palosaari 9b7839c306 [media] si2168: print chip version
Print chip version once using log level into when init() is called.
Remove cold/warm state printing as those are not very useful.

old printing:
si2168 6-0064: found a 'Silicon Labs Si2168' in cold state
si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 6-0064: firmware version: 4.0.11
si2168 6-0064: found a 'Silicon Labs Si2168' in warm state

new printing:
si2168 6-0064: found a 'Silicon Labs Si2168-B40'
si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 6-0064: firmware version: 4.0.11

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:45:36 -02:00
Antti Palosaari 58f6693fa1 [media] si2168: remove unneeded fw variable initialization
commit 034e1ec0ce
si2168: One function call less in si2168_init() after error detection

That commit added goto label for error path to release firmware,
but forgets to remove variable NULL set. Remove those now.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:44:43 -02:00
Antti Palosaari 68c16a76c6 [media] si2168: enhance firmware download routine
All known old firmware firmware formats are downloaded using 8 byte
chunks. Reject firmware if it could not be divided to 8 byte chunks
and because of that we could simplify some calculations. Now both
supported firmware download routines are rather similar.

Cc: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:44:00 -02:00
Antti Palosaari 1ee5e7dd5e [media] si2168: add own goto label for kzalloc failure
Use own label for kzalloc failure in which does not call kfree().
kfree() could be called with NULL, but it is still better to have
own label which skips unnecessary kfree().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:43:16 -02:00
Antti Palosaari e5dd1100c7 [media] si2168: change stream id debug log formatter
Change formatter from signed to unsigned as stream_id is 32bit
unsigned variable.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:42:43 -02:00
Antti Palosaari 955e0ab8ce [media] si2168: change firmware version print from debug to info
Even firmware version is not needed to know, it is still interesting
and useful to know some cases. Due to that increase its printing to
info log level.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:42:12 -02:00
Antti Palosaari 346d4900f0 [media] si2168: rename few things
Rename some goto labels and more. No functionality changes.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:41:49 -02:00
Antti Palosaari 4affbe1d08 [media] si2168: simplify si2168_cmd_execute() error path
Remove if () from firmware command error path as there should not be
any error prone conditional logic there. Use goto labels instead.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:41:11 -02:00
Antti Palosaari 3de3583539 [media] si2168: get rid of own struct i2c_client pointer
We don't need that anymore as same pointer is passed to each
routine via struct dvb_frontend private field.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:40:24 -02:00
Antti Palosaari 6307b56080 [media] si2168: carry pointer to client instead of state
Carry struct i2c_client pointer inside struct dvb_frontend private
pointer. This driver is I2C driver, which is represented as a
struct i2c_client, so better to carry this top level structure for
each routine in order to unify things. This allows further
simplification.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:39:49 -02:00
Antti Palosaari bd01c7666c [media] si2168: rename device state variable from 's' to 'dev'
'dev' is most common name in kernel for structure containing device
state instance, so rename it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:38:59 -02:00
Antti Palosaari f1ecc5d119 [media] si2168: define symbol rate limits
w_scan complains about missing symbol rate limits:
This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org

Chip supports 1 to 7.2 MSymbol/s on DVB-C.

Cc: stable@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29 18:38:17 -02:00
Jurgen Kramer 551c33e729 [media] Si2168: increase timeout to fix firmware loading
Increase si2168 cmd execute timeout to prevent firmware load failures. Tests
shows it takes up to 52ms to load the 'dvb-demod-si2168-a30-01.fw' firmware.
Increase timeout to a safe value of 70ms.

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-26 08:23:45 -02:00
Olli Salonen 1b97dc98b5 [media] si2168: add support for firmware files in new format
This patch adds support for new type of firmware versions of Si2168 chip.

Old type: n x 8 bytes (all data, first byte seems to be 04 or 05)
New type: n x 17 bytes (1 byte indicates len and max 16 bytes data)

New version of TechnoTrend CT2-4400 drivers
(http://www.tt-downloads.de/bda-treiber_4.3.0.0.zip) contains newer
firmware for Si2168-B40 that is in the new format. It can be extracted
with the following command:

dd if=ttTVStick4400_64.sys ibs=1 skip=323872 count=6919 of=dvb-demod-si2168-b40-01.fw

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04 14:00:01 -02:00
Olli Salonen a594cf21aa [media] si2168: debug printout for firmware version
A debug printout for firmware version.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04 13:59:04 -02:00
Markus Elfring 034e1ec0ce [media] si2168: One function call less in si2168_init() after error detection
GIT_AUTHOR_DATE=1416472767
The release_firmware() function was called in some cases by the
si2168_init() function during error handling even if the passed variable
contained still a null pointer. This implementation detail could be improved
by the introduction of another jump label.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 12:12:01 -02:00
Markus Elfring 9bc2dd7ec0 [media] DVB-frontends: Deletion of unnecessary checks before the function call "release_firmware"
GIT_AUTHOR_DATE=1416472432
The release_firmware() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 09:52:44 -02:00
CrazyCat 52791979e9 [media] si2168: TS clock inversion control
TS clock polarity control implemented.

[Antti: Resolved simple conflict]

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 09:14:41 -02:00
Antti Palosaari 45c3cbb184 [media] si2168: do not print device is warm every-time when opened
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime
when device was opened. Message is aimed to point out firmware is
downloaded, up and running. So print it only in case firmware download
is performed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04 18:18:13 -02:00
Olli Salonen 327eeb3a1a [media] si2168: add FE_CAN_MULTISTREAM into caps
PLP selection was implemented for Si2168 last month (patchwork 25387). However, FE_CAN_MULTISTREAM was not added to dvb_frontend_ops of si2168. This patch adds FE_CAN_MULTISTREAM, which indicates that multiple PLP are supported.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26 06:47:44 -03:00
Olli Salonen 8e417224df [media] si2168: avoid firmware loading if it has been loaded previously
Add a variable to keep track if firmware is loaded or not and skip parts of the
initialization if fw is already loaded. Resume from sleep with a different
command compared to initial power up and run command 85 after resume command.
This behaviour is observed when using manufacturer provided binary-only si2168
driver for TechnoTrend CT2-4400.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 16:42:39 -03:00
CrazyCat e395e573b3 [media] si2168: DVB-T2 PLP selection implemented
DVB-T2 PLP selection implemented for Si2168 demod.
Tested with PCTV 292e.

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02 15:45:36 -03:00