Commit Graph

593 Commits

Author SHA1 Message Date
Coly Li 0f0709e6bf bcache: stop bcache device when backing device is offline
Currently bcache does not handle backing device failure, if backing
device is offline and disconnected from system, its bcache device can still
be accessible. If the bcache device is in writeback mode, I/O requests even
can success if the requests hit on cache device. That is to say, when and
how bcache handles offline backing device is undefined.

This patch tries to handle backing device offline in a rather simple way,
- Add cached_dev->status_update_thread kernel thread to update backing
  device status in every 1 second.
- Add cached_dev->offline_seconds to record how many seconds the backing
  device is observed to be offline. If the backing device is offline for
  BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and
  call bcache_device_stop() to stop the bache device which linked to the
  offline backing device.

Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds,
its bcache device will be removed, then user space application writing on
it will get error immediately, and handler the device failure in time.

This patch is quite simple, does not handle more complicated situations.
Once the bcache device is stopped, users need to recovery the backing
device, register and attach it manually.

Changelog:
v3: call wait_for_kthread_stop() before exits kernel thread.
v2: remove "bcache: " prefix when calling pr_warn().
v1: initial version.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28 14:53:16 -06:00
Coly Li 1c1a2ee1b5 bcache: return 0 from bch_debug_init() if CONFIG_DEBUG_FS=n
Commit 539d39eb27 ("bcache: fix wrong return value in bch_debug_init()")
returns the return value of debugfs_create_dir() to bcache_init(). When
CONFIG_DEBUG_FS=n, bch_debug_init() always returns 1 and makes
bcache_init() failedi.

This patch makes bch_debug_init() always returns 0 if CONFIG_DEBUG_FS=n,
so bcache can continue to work for the kernels which don't have debugfs
enanbled.

Changelog:
v4: Add Acked-by from Kent Overstreet.
v3: Use IS_ENABLED(CONFIG_DEBUG_FS) to replace #ifdef DEBUG_FS.
v2: Remove a warning information
v1: Initial version.

Fixes: Commit 539d39eb27 ("bcache: fix wrong return value in bch_debug_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Massimo B. <massimo.b@gmx.net>
Reported-by: Kai Krakow <kai@kaishome.de>
Tested-by: Kai Krakow <kai@kaishome.de>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-17 09:43:40 -06:00
Coly Li 09a44ca211 bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set
It is possible that multiple I/O requests hits on failed cache device or
backing device, therefore it is quite common that CACHE_SET_IO_DISABLE is
set already when a task tries to set the bit from bch_cache_set_error().
Currently the message "CACHE_SET_IO_DISABLE already set" is printed by
pr_warn(), which might mislead users to think a serious fault happens in
source code.

This patch uses pr_info() to print the information in such situation,
avoid extra worries. This information is helpful to understand bcache
behavior in cache device failures, so I still keep them in source code.

Fixes: 771f393e8f ("bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:16 -06:00
Coly Li 4fd8e13843 bcache: set dc->io_disable to true in conditional_stop_bcache_device()
Commit 7e027ca4b5 ("bcache: add stop_when_cache_set_failed option to
backing device") adds stop_when_cache_set_failed option and stops bcache
device if stop_when_cache_set_failed is auto and there is dirty data on
broken cache device. There might exists a small time gap that the cache
set is released and set to NULL but bcache device is not released yet
(because they are released in parallel). During this time gap, dc->c is
NULL so CACHE_SET_IO_DISABLE won't be checked, and dc->io_disable is still
false, so new coming I/O requests will be accepted and directly go into
backing device as no cache set attached to. If there is dirty data on
cache device, this behavior may introduce potential inconsistent data.

This patch sets dc->io_disable to true before calling bcache_device_stop()
to make sure the backing device will reject new coming I/O request as
well, so even in the small time gap no I/O will directly go into backing
device to corrupt data consistency.

Fixes: 7e027ca4b5 ("bcache: add stop_when_cache_set_failed option to backing device")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:15 -06:00
Coly Li ecb2ba8cb8 bcache: add wait_for_kthread_stop() in bch_allocator_thread()
When CACHE_SET_IO_DISABLE is set on cache set flags, bcache allocator
thread routine bch_allocator_thread() may stop the while-loops and
exit. Then it is possible to observe the following kernel oops message,

[  631.068366] bcache: bch_btree_insert() error -5
[  631.069115] bcache: cached_dev_detach_finish() Caching disabled for sdf
[  631.070220] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  631.070250] PGD 0 P4D 0
[  631.070261] Oops: 0002 [#1] SMP PTI
[snipped]
[  631.070578] Workqueue: events cache_set_flush [bcache]
[  631.070597] RIP: 0010:exit_creds+0x1b/0x50
[  631.070610] RSP: 0018:ffffc9000705fe08 EFLAGS: 00010246
[  631.070626] RAX: 0000000000000001 RBX: ffff880a622ad300 RCX: 000000000000000b
[  631.070645] RDX: 0000000000000601 RSI: 000000000000000c RDI: 0000000000000000
[  631.070663] RBP: ffff880a622ad300 R08: ffffea00190c66e0 R09: 0000000000000200
[  631.070682] R10: ffff880a48123000 R11: ffff880000000000 R12: 0000000000000000
[  631.070700] R13: ffff880a4b160e40 R14: ffff880a4b160000 R15: 0ffff880667e2530
[  631.070719] FS:  0000000000000000(0000) GS:ffff880667e00000(0000) knlGS:0000000000000000
[  631.070740] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  631.070755] CR2: 0000000000000000 CR3: 000000000200a001 CR4: 00000000003606e0
[  631.070774] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  631.070793] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  631.070811] Call Trace:
[  631.070828]  __put_task_struct+0x55/0x160
[  631.070845]  kthread_stop+0xee/0x100
[  631.070863]  cache_set_flush+0x11d/0x1a0 [bcache]
[  631.070879]  process_one_work+0x146/0x340
[  631.070892]  worker_thread+0x47/0x3e0
[  631.070906]  kthread+0xf5/0x130
[  631.070917]  ? max_active_store+0x60/0x60
[  631.070930]  ? kthread_bind+0x10/0x10
[  631.070945]  ret_from_fork+0x35/0x40
[snipped]
[  631.071017] RIP: exit_creds+0x1b/0x50 RSP: ffffc9000705fe08
[  631.071033] CR2: 0000000000000000
[  631.071045] ---[ end trace 011c63a24b22c927 ]---
[  631.071085] bcache: bcache_device_free() bcache0 stopped

The reason is when cache_set_flush() tries to call kthread_stop() to stop
allocator thread, but it exits already due to cache device I/O errors.

This patch adds wait_for_kthread_stop() at tail of bch_allocator_thread(),
to prevent the thread routine exiting directly. Then the allocator thread
can be blocked at wait_for_kthread_stop() and wait for cache_set_flush()
to stop it by calling kthread_stop().

changelog:
v3: add Reviewed-by from Hannnes.
v2: not directly return from allocator_wait(), move 'return 0' to tail of
    bch_allocator_thread().
v1: initial version.

Fixes: 771f393e8f ("bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:13 -06:00
Coly Li bf78980fcc bcache: count backing device I/O error for writeback I/O
Commit c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
counts backing device I/O requets and set dc->io_disable to true if error
counters exceeds dc->io_error_limit. But it only counts I/O errors for
regular I/O request, neglects errors of write back I/Os when backing device
is offline.

This patch counts the errors of writeback I/Os, in dirty_endio() if
bio->bi_status is  not 0, it means error happens when writing dirty keys
to backing device, then bch_count_backing_io_errors() is called.

By this fix, even there is no reqular I/O request coming, if writeback I/O
errors exceed dc->io_error_limit, the bcache device may still be stopped
for the broken backing device.

Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:12 -06:00
Coly Li 6147305c73 bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()
Commit c7b7bd0740 ("bcache: add io_disable to struct cached_dev") tries
to stop bcache device by calling bcache_device_stop() when too many I/O
errors happened on backing device. But if there is internal I/O happening
on cache device (writeback scan, garbage collection, etc), a regular I/O
request triggers the internal I/Os may still holds a refcount of dc->count,
and the refcount may only be dropped after the internal I/O stopped.

By this patch, bch_cached_dev_error() will check if the backing device is
attached to a cache set, if yes that CACHE_SET_IO_DISABLE will be set to
flags of this cache set. Then internal I/Os on cache device will be
rejected and stopped immediately, and the bcache device can be stopped.

For people who are not familiar with the interesting refcount dependance,
let me explain a bit more how the fix works. Example the writeback thread
will scan cache device for dirty data writeback purpose. Before it stopps,
it holds a refcount of dc->count. When CACHE_SET_IO_DISABLE bit is set,
the internal I/O will stopped and the while-loop in bch_writeback_thread()
quits and calls cached_dev_put() to drop dc->count. If this is the last
refcount to drop, then cached_dev_detach_finish() will be called. In this
call back function, in turn closure_put(dc->disk.cl) is called to drop a
refcount of closure dc->disk.cl. If this is the last refcount of this
closure to drop, then cached_dev_flush() will be called. Then the cached
device is freed. So if CACHE_SET_IO_DISABLE is not set, the bache device
can not be stopped until all inernal cache device I/O stopped. For large
size cache device, and writeback thread competes locks with gc thread,
there might be a quite long time to wait.

Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:10 -06:00
Coly Li 6e916a7eb1 bcache: store disk name in struct cache and struct cached_dev
Current code uses bdevname() or bio_devname() to reference gendisk
disk name when bcache needs to display the disk names in kernel message.
It was safe before bcache device failure handling patch set merged in,
because when devices are failed, there was deadlock to prevent bcache
printing error messages with gendisk disk name. But after the failure
handling patch set merged, the deadlock is fixed, so it is possible
that the gendisk structure bdev->hd_disk is released when bdevname() is
called to reference bdev->bd_disk->disk_name[]. This is why I receive
bug report of NULL pointers deference panic.

This patch stores gendisk disk name in a buffer inside struct cache and
struct cached_dev, then print out the offline device name won't reference
bdev->hd_disk anymore. And this patch also avoids extra function calls
of bdevname() and bio_devnmae().

Changelog:
v3, add Reviewed-by from Hannes.
v2, call bdevname() earlier in register_bdev()
v1, first version with segguestion from Junhui Tang.

Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Fixes: 5138ac6748 ("bcache: fix misleading error message in bch_count_io_errors()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 08:35:08 -06:00
Linus Torvalds 3526dd0c78 for-4.17/block-20180402
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJawr05AAoJEPfTWPspceCmT2UP/1uuaqwzyl4VjFNb/k7KS7UM
 +Cs/1HBlGomgMA8orDTGqtWqLRdR3z4RSh0+MvXTzQ78HpFVYz7CbDc9itHm+G9M
 X0ypD4kF/JGCFb5cxk+x6qv28uO2nv4DP3+0hHqJWLH4UVJBWDY6bs4BPShsf9QB
 I6XjioNMhoqylXgdOITLODJZz+TcChlJMDAqwhpJwh9TH1wjobleAZ6AdmCPfgi5
 h0UCKMUKzcVJlNZwQUrzrs2cxcx9Uhunnbz7HK0ZV4n/FKFtDpGynFpQQ71pZxKe
 Be0ZOBPCQvC3ykOM/egCIvC/e5y7FgrjORD6jxyu1PTwAugI5E1VYSMxHkXvgPAx
 zOo9A7RT4GPO2tDQv+DbzNFpqeSAclTgSmr+/y1wmheBs8DiSt7MPVBiNM4zdCNv
 NLk9z7IEjFhdmluSB/LbTb1aokypMb/q7QTLouPHdwGn80k7yrhFyLHgdjpNTQ2K
 UHfHZvGxkOX6SmFhBNOtIFUkuSceenh64a0RkRle7filx+ImpbCVm2/GYi9zZNCu
 EtctgzLbLmz40zMiyDaZS2bxBgGzfn6yf4xd9LsaAJPMhvZnmXogT0D9ctWXB0WU
 mMaS7sOkLnNjnGkzF1fHkeiZ/oigrstJbe+CA7BtOdwxpWn6MZBgKEoFQ6iA2b3X
 5J1axMgVH5LAsIEcEQVq
 =RVhK
 -----END PGP SIGNATURE-----

Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "It's a pretty quiet round this time, which is nice. This contains:

   - series from Bart, cleaning up the way we set/test/clear atomic
     queue flags.

   - series from Bart, fixing races between gendisk and queue
     registration and removal.

   - set of bcache fixes and improvements from various folks, by way of
     Michael Lyle.

   - set of lightnvm updates from Matias, most of it being the 1.2 to
     2.0 transition.

   - removal of unused DIO flags from Nikolay.

   - blk-mq/sbitmap memory ordering fixes from Omar.

   - divide-by-zero fix for BFQ from Paolo.

   - minor documentation patches from Randy.

   - timeout fix from Tejun.

   - Alpha "can't write a char atomically" fix from Mikulas.

   - set of NVMe fixes by way of Keith.

   - bsg and bsg-lib improvements from Christoph.

   - a few sed-opal fixes from Jonas.

   - cdrom check-disk-change deadlock fix from Maurizio.

   - various little fixes, comment fixes, etc from various folks"

* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
  blk-mq: Directly schedule q->timeout_work when aborting a request
  blktrace: fix comment in blktrace_api.h
  lightnvm: remove function name in strings
  lightnvm: pblk: remove some unnecessary NULL checks
  lightnvm: pblk: don't recover unwritten lines
  lightnvm: pblk: implement 2.0 support
  lightnvm: pblk: implement get log report chunk
  lightnvm: pblk: rename ppaf* to addrf*
  lightnvm: pblk: check for supported version
  lightnvm: implement get log report chunk helpers
  lightnvm: make address conversions depend on generic device
  lightnvm: add support for 2.0 address format
  lightnvm: normalize geometry nomenclature
  lightnvm: complete geo structure with maxoc*
  lightnvm: add shorten OCSSD version in geo
  lightnvm: add minor version to generic geometry
  lightnvm: simplify geometry structure
  lightnvm: pblk: refactor init/exit sequences
  lightnvm: Avoid validation of default op value
  lightnvm: centralize permission check for lightnvm ioctl
  ...
2018-04-05 14:27:02 -07:00
Bart Van Assche 5f2b18ec8e bcache: Fix a compiler warning in bcache_device_init()
Avoid that building with W=1 triggers the following compiler warning:

drivers/md/bcache/super.c:776:20: warning: comparison is always false due to limited range of data type [-Wtype-limits]
      d->nr_stripes > SIZE_MAX / sizeof(atomic_t)) {
                    ^

Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 20d3a51871 bcache: Reduce the number of sparse complaints about lock imbalances
Add more annotations for sparse to inform it about which functions do
not have the same number of spin_lock() and spin_unlock() calls.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 42361469ae bcache: Suppress more warnings about set-but-not-used variables
This patch does not change any functionality.

Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche f0d3814090 bcache: Remove an unused variable
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 47344e330e bcache: Fix kernel-doc warnings
Avoid that building with W=1 triggers warnings about the kernel-doc
headers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 9dfbdec7b7 bcache: Annotate switch fall-through
This patch avoids that building with W=1 triggers complaints about
switch fall-throughs.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 4a4e443835 bcache: Add __printf annotation to __bch_check_keys()
Make it possible for the compiler to verify the consistency of the
format string passed to __bch_check_keys() and the arguments that
should be formatted according to that format string.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche fd01991d5c bcache: Fix indentation
This patch avoids that smatch complains about inconsistent indentation.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li c7b7bd0740 bcache: add io_disable to struct cached_dev
If a bcache device is configured to writeback mode, current code does not
handle write I/O errors on backing devices properly.

In writeback mode, write request is written to cache device, and
latter being flushed to backing device. If I/O failed when writing from
cache device to the backing device, bcache code just ignores the error and
upper layer code is NOT noticed that the backing device is broken.

This patch tries to handle backing device failure like how the cache device
failure is handled,
- Add a error counter 'io_errors' and error limit 'error_limit' in struct
  cached_dev. Add another io_disable to struct cached_dev to disable I/Os
  on the problematic backing device.
- When I/O error happens on backing device, increase io_errors counter. And
  if io_errors reaches error_limit, set cache_dev->io_disable to true, and
  stop the bcache device.

The result is, if backing device is broken of disconnected, and I/O errors
reach its error limit, backing device will be disabled and the associated
bcache device will be removed from system.

Changelog:
v2: remove "bcache: " prefix in pr_error(), and use correct name string to
    print out bcache device gendisk name.
v1: indeed this is new added in v2 patch set.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li 27a40ab926 bcache: add backing_request_endio() for bi_end_io
In order to catch I/O error of backing device, a separate bi_end_io
call back is required. Then a per backing device counter can record I/O
errors number and retire the backing device if the counter reaches a
per backing device I/O error limit.

This patch adds backing_request_endio() to bcache backing device I/O code
path, this is a preparation for further complicated backing device failure
handling. So far there is no real code logic change, I make this change a
separate patch to make sure it is stable and reliable for further work.

Changelog:
v2: Fix code comments typo, remove a redundant bch_writeback_add() line
    added in v4 patch set.
v1: indeed this is new added in this patch set.

[mlyle: truncated commit subject]

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Chengguang Xu df2b94313a bcache: move closure debug file into debug directory
In current code closure debug file is outside of debug directory
and when unloading module there is lack of removing operation
for closure debug file, so it will cause creating error when trying
to reload  module.

This patch move closure debug file into "bcache" debug direcory
so that the file can get deleted properly.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Tang Junhui ca71df3166 bcache: fix using of loop variable in memory shrink
In bch_mca_scan(), There are some confusion and logical error in the use of
loop variables. In this patch, we clarify them as:
1) nr: the number of btree nodes needs to scan, which will decrease after
we scan a btree node, and should not be less than 0;
2) i: the number of btree nodes have scanned, includes both
btree_cache_freeable and btree_cache, which should not be bigger than
btree_cache_used;
3) freed: the number of btree nodes have freed.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Tang Junhui f3641c3abd bcache: fix error return value in memory shrink
In bch_mca_scan(), the return value should not be the number of freed btree
nodes, but the number of pages of freed btree nodes.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Tang Junhui 688892b3bc bcache: fix incorrect sysfs output value of strip size
Stripe size is shown as zero when no strip in back end device:
[root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size
0.0k

Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs
interface, stripe_size was changed from sectors to bytes, and move
9 bits left, so the 32 bits variable overflows.

This patch change the variable to a 64 bits type before moving bits.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Tang Junhui bc082a55d2 bcache: fix inaccurate io state for detached bcache devices
When we run IO in a detached device,  and run iostat to shows IO status,
normally it will show like bellow (Omitted some fields):
Device: ... avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sdd        ... 15.89     0.53    1.82    0.20    2.23   1.81  52.30
bcache0    ... 15.89   115.42    0.00    0.00    0.00   2.40  69.60
but after IO stopped, there are still very big avgqu-sz and %util
values as bellow:
Device: ... avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
bcache0   ...      0   5326.32    0.00    0.00    0.00   0.00 100.10

The reason for this issue is that, only generic_start_io_acct() called
and no generic_end_io_acct() called for detached device in
cached_dev_make_request(). See the code:
//start generic_start_io_acct()
generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0);
if (cached_dev_get(dc)) {
	//will callback generic_end_io_acct()
}
else {
	//will not call generic_end_io_acct()
}

This patch calls generic_end_io_acct() in the end of IO for detached
devices, so we can show IO state correctly.

(Modified to use GFP_NOIO in kzalloc() by Coly Li)

Changelog:
v2: fix typo.
v1: the initial version.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li 7e027ca4b5 bcache: add stop_when_cache_set_failed option to backing device
When there are too many I/O errors on cache device, current bcache code
will retire the whole cache set, and detach all bcache devices. But the
detached bcache devices are not stopped, which is problematic when bcache
is in writeback mode.

If the retired cache set has dirty data of backing devices, continue
writing to bcache device will write to backing device directly. If the
LBA of write request has a dirty version cached on cache device, next time
when the cache device is re-registered and backing device re-attached to
it again, the stale dirty data on cache device will be written to backing
device, and overwrite latest directly written data. This situation causes
a quite data corruption.

But we cannot simply stop all attached bcache devices when the cache set is
broken or disconnected. For example, use bcache to accelerate performance
of an email service. In such workload, if cache device is broken but no
dirty data lost, keep the bcache device alive and permit email service
continue to access user data might be a better solution for the cache
device failure.

Nix <nix@esperi.org.uk> points out the issue and provides the above example
to explain why it might be necessary to not stop bcache device for broken
cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant
suggestion to provide "always" and "auto" options to per-cached device
sysfs file stop_when_cache_set_failed. If cache set is retiring and the
backing device has no dirty data on cache, it should be safe to keep the
bcache device alive. In this case, if stop_when_cache_set_failed is set to
"auto", the device failure handling code will not stop this bcache device
and permit application to access the backing device with a unattached
bcache device.

Changelog:
[mlyle: edited to not break string constants across lines]
v3: fix typos pointed out by Nix.
v2: change option values of stop_when_cache_set_failed from 1/0 to
    "auto"/"always".
v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1
    (always stop).

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Cc: Nix <nix@esperi.org.uk>
Cc: Pavel Goran <via-bcache@pvgoran.name>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li 771f393e8f bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags
When too many I/Os failed on cache device, bch_cache_set_error() is called
in the error handling code path to retire whole problematic cache set. If
new I/O requests continue to come and take refcount dc->count, the cache
set won't be retired immediately, this is a problem.

Further more, there are several kernel thread and self-armed kernel work
may still running after bch_cache_set_error() is called. It needs to wait
quite a while for them to stop, or they won't stop at all. They also
prevent the cache set from being retired.

The solution in this patch is, to add per cache set flag to disable I/O
request on this cache and all attached backing devices. Then new coming I/O
requests can be rejected in *_make_request() before taking refcount, kernel
threads and self-armed kernel worker can stop very fast when flags bit
CACHE_SET_IO_DISABLE is set.

Because bcache also do internal I/Os for writeback, garbage collection,
bucket allocation, journaling, this kind of I/O should be disabled after
bch_cache_set_error() is called. So closure_bio_submit() is modified to
check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set,
closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and
return, generic_make_request() won't be called.

A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit
from cache_set->flags, to disable or enable cache set I/O for debugging. It
is helpful to trigger more corner case issues for failed cache device.

Changelog
v4, add wait_for_kthread_stop(), and call it before exits writeback and gc
    kernel threads.
v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index.
    remove "bcache: " prefix when printing out kernel message.
v2, more changes by previous review,
- Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui.
- Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this
  is reported and inspired from origal patch of Pavel Vazharov.
v1, initial version.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Pavel Vazharov <freakpv@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li 3fd47bfe55 bcache: stop dc->writeback_rate_update properly
struct delayed_work writeback_rate_update in struct cache_dev is a delayed
worker to call function update_writeback_rate() in period (the interval is
defined by dc->writeback_rate_update_seconds).

When a metadate I/O error happens on cache device, bcache error handling
routine bch_cache_set_error() will call bch_cache_set_unregister() to
retire whole cache set. On the unregister code path, this delayed work is
stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update).

dc->writeback_rate_update is a special delayed work from others in bcache.
In its routine update_writeback_rate(), this delayed work is re-armed
itself. That means when cancel_delayed_work_sync() returns, this delayed
work can still be executed after several seconds defined by
dc->writeback_rate_update_seconds.

The problem is, after cancel_delayed_work_sync() returns, the cache set
unregister code path will continue and release memory of struct cache set.
Then the delayed work is scheduled to run, __update_writeback_rate()
will reference the already released cache_set memory, and trigger a NULL
pointer deference fault.

This patch introduces two more bcache device flags,
- BCACHE_DEV_WB_RUNNING
  bit set:  bcache device is in writeback mode and running, it is OK for
            dc->writeback_rate_update to re-arm itself.
  bit clear:bcache device is trying to stop dc->writeback_rate_update,
            this delayed work should not re-arm itself and quit.
- BCACHE_DEV_RATE_DW_RUNNING
  bit set:  routine update_writeback_rate() is executing.
  bit clear: routine update_writeback_rate() quits.

This patch also adds a function cancel_writeback_rate_update_dwork() to
wait for dc->writeback_rate_update quits before cancel it by calling
cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected
quit dc->writeback_rate_update, after time_out seconds this function will
give up and continue to call cancel_delayed_work_sync().

And here I explain how this patch stops self re-armed delayed work properly
with the above stuffs.

update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning
and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling
cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING.

Before calling cancel_delayed_work_sync() wait utill flag
BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling
cancel_delayed_work_sync(), dc->writeback_rate_update must be already re-
armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases
delayed work routine update_writeback_rate() won't be executed after
cancel_delayed_work_sync() returns.

Inside update_writeback_rate() before calling schedule_delayed_work(), flag
BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means
someone is about to stop the delayed work. Because flag
BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync()
has to wait for this flag to be cleared, we don't need to worry about race
condition here.

If update_writeback_rate() is scheduled to run after checking
BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync()
in cancel_writeback_rate_update_dwork(), it is also safe. Because at this
moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned
previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear
and quit immediately.

Because there are more dependences inside update_writeback_rate() to struct
cache_set memory, dc->writeback_rate_update is not a simple self re-arm
delayed work. After trying many different methods (e.g. hold dc->count, or
use locks), this is the only way I can find which works to properly stop
dc->writeback_rate_update delayed work.

Changelog:
v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING
    to bit index, for test_bit().
v2: Try to fix the race issue which is pointed out by Junhui.
v1: The initial version for review

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li fadd94e05c bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
    'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.

This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.

Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.

It is safe to do the following check without locking, let me explain why,
+	if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+	    (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {

If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
   kthread_stop() from cached_dev_detach_finish() will wake up it and
   terminate by making kthread_should_stop() return true. And in normal
   run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
   condition
	!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
   is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
   go to sleep,
   "!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
   each of them independently controls the writeback thread should sleep or
   not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
   If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
   call bch_writeback_queue() immediately or call bch_writeback_add() which
   indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
   wake_up_process(dc->writeback_thread) is called. It sets writeback
   thread's task state to TASK_RUNNING and following an implicit memory
   barrier, then tries to wake up the writeback thread.
   In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
   doing the condition check. If other CPU core sets the TASK_RUNNING state
   after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
   will be scheduled to run very soon because its state is not
   TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
   writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
   of wake_up_process() will make sure modification of dc->has_dirty on
   other CPU core is updated and observed on the CPU core of writeback
   thread. Therefore the condition check will correctly be false, and
   continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
   dc->writeback_running can be changed via sysfs file, every time it is
   modified, a following bch_writeback_queue() is alwasy called. So the
   change is always observed on the CPU core of writeback thread. If
   dc->writeback_running is changed from 0 to 1 on other CPU core, this
   condition check will observe the modification and allow writeback
   thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.

I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Huijun Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Coly Li 804f3c6981 bcache: fix cached_dev->count usage for bch_cache_set_error()
When bcache metadata I/O fails, bcache will call bch_cache_set_error()
to retire the whole cache set. The expected behavior to retire a cache
set is to unregister the cache set, and unregister all backing device
attached to this cache set, then remove sysfs entries of the cache set
and all attached backing devices, finally release memory of structs
cache_set, cache, cached_dev and bcache_device.

In my testing when journal I/O failure triggered by disconnected cache
device, sometimes the cache set cannot be retired, and its sysfs
entry /sys/fs/bcache/<uuid> still exits and the backing device also
references it. This is not expected behavior.

When metadata I/O failes, the call senquence to retire whole cache set is,
        bch_cache_set_error()
        bch_cache_set_unregister()
        bch_cache_set_stop()
        __cache_set_unregister()     <- called as callback by calling
                                        clousre_queue(&c->caching)
        cache_set_flush()            <- called as a callback when refcount
                                        of cache_set->caching is 0
        cache_set_free()             <- called as a callback when refcount
                                        of catch_set->cl is 0
        bch_cache_set_release()      <- called as a callback when refcount
                                        of catch_set->kobj is 0

I find if kernel thread bch_writeback_thread() quits while-loop when
kthread_should_stop() is true and searched_full_index is false, clousre
callback cache_set_flush() set by continue_at() will never be called. The
result is, bcache fails to retire whole cache set.

cache_set_flush() will be called when refcount of closure c->caching is 0,
and in function bcache_device_detach() refcount of closure c->caching is
released to 0 by clousre_put(). In metadata error code path, function
bcache_device_detach() is called by cached_dev_detach_finish(). This is a
callback routine being called when cached_dev->count is 0. This refcount
is decreased by cached_dev_put().

The above dependence indicates, cache_set_flush() will be called when
refcount of cache_set->cl is 0, and refcount of cache_set->cl to be 0
when refcount of cache_dev->count is 0.

The reason why sometimes cache_dev->count is not 0 (when metadata I/O fails
and bch_cache_set_error() called) is, in bch_writeback_thread(), refcount
of cache_dev is not decreased properly.

In bch_writeback_thread(), cached_dev_put() is called only when
searched_full_index is true and cached_dev->writeback_keys is empty, a.k.a
there is no dirty data on cache. In most of run time it is correct, but
when bch_writeback_thread() quits the while-loop while cache is still
dirty, current code forget to call cached_dev_put() before this kernel
thread exits. This is why sometimes cache_set_flush() is not executed and
cache set fails to be retired.

The reason to call cached_dev_put() in bch_writeback_rate() is, when the
cache device changes from clean to dirty, cached_dev_get() is called, to
make sure during writeback operatiions both backing and cache devices
won't be released.

Adding following code in bch_writeback_thread() does not work,
   static int bch_writeback_thread(void *arg)
        }

+       if (atomic_read(&dc->has_dirty))
+               cached_dev_put()
+
        return 0;
 }
because writeback kernel thread can be waken up and start via sysfs entry:
        echo 1 > /sys/block/bcache<N>/bcache/writeback_running
It is difficult to check whether backing device is dirty without race and
extra lock. So the above modification will introduce potential refcount
underflow in some conditions.

The correct fix is, to take cached dev refcount when creating the kernel
thread, and put it before the kernel thread exits. Then bcache does not
need to take a cached dev refcount when cache turns from clean to dirty,
or to put a cached dev refcount when cache turns from ditry to clean. The
writeback kernel thread is alwasy safe to reference data structure from
cache set, cache and cached device (because a refcount of cache device is
taken for it already), and no matter the kernel thread is stopped by I/O
errors or system reboot, cached_dev->count can always be used correctly.

The patch is simple, but understanding how it works is quite complicated.

Changelog:
v2: set dc->writeback_thread to NULL in this patch, as suggested by Hannes.
v1: initial version for review.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18 20:15:20 -06:00
Bart Van Assche 44e1ebe2a3 bcache: Use the blk_queue_flag_{set,clear}() functions
Use the blk_queue_flag_{set,clear}() functions instead of open-coding
these.

Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 14:13:48 -07:00
Michael Lyle 86755b7a96 bcache: don't attach backing with duplicate UUID
This can happen e.g. during disk cloning.

This is an incomplete fix: it does not catch duplicate UUIDs earlier
when things are still unattached.  It does not unregister the device.
Further changes to cope better with this are planned but conflict with
Coly's ongoing improvements to handling device errors.  In the meantime,
one can manually stop the device after this has happened.

Attempts to attach a duplicate device result in:

[  136.372404] loop: module loaded
[  136.424461] bcache: register_bdev() registered backing device loop0
[  136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached

My test procedure is:

  dd if=/dev/sdb1 of=imgfile bs=1024 count=262144
  losetup -f imgfile

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 14:43:07 -07:00
Tang Junhui cc40daf91b bcache: fix crashes in duplicate cache device register
Kernel crashed when register a duplicate cache device, the call trace is
bellow:
[  417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G
   W  OE    4.15.5-amd64-preempt-sysrq-20171018 #2
[  417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS
N1DET41W (1.15 ) 12/31/2015
[  417.643870] RIP: 0010:bdevname+0x13/0x1e
[  417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282
[  417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8
c7edf
[  417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000
00000
[  417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000
1850e
[  417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000
00000
[  417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d
90000
[  417.643913] FS:  00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS:
0000000000000000
[  417.643919] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003
606e0
[  417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000
00000
[  417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000
00400
[  417.643946] Call Trace:
[  417.643978]  register_bcache+0x1117/0x1270 [bcache]
[  417.643994]  ? slab_pre_alloc_hook+0x15/0x3c
[  417.644001]  ? slab_post_alloc_hook.isra.44+0xa/0x1a
[  417.644013]  ? kernfs_fop_write+0xf6/0x138
[  417.644020]  kernfs_fop_write+0xf6/0x138
[  417.644031]  __vfs_write+0x31/0xcc
[  417.644043]  ? current_kernel_time64+0x10/0x36
[  417.644115]  ? __audit_syscall_entry+0xbf/0xe3
[  417.644124]  vfs_write+0xa5/0xe2
[  417.644133]  SyS_write+0x5c/0x9f
[  417.644144]  do_syscall_64+0x72/0x81
[  417.644161]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  417.644169] RIP: 0033:0x7fde7e1c1974
[  417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000
000000001
[  417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c
1974
[  417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000
0001
[  417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000
0077
[  417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000
0001
[  417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000
0000
[  417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0
0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8
b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39
[  417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38
[  417.644306] CR2: 0000000000000314

When registering duplicate cache device in register_cache(), after failure
on calling register_cache_set(), bch_cache_release() will be called, then
bdev will be freed, so bdevname(bdev, name) caused kernel crash.

Since bch_cache_release() will free bdev, so in this patch we make sure
bdev being freed if register_cache() fail, and do not free bdev again in
register_bcache() when register_cache() fail.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reported-by: Marc MERLIN <marc@merlins.org>
Tested-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 14:43:05 -07:00
Tang Junhui 60eb34ec55 bcache: fix kcrashes with fio in RAID5 backend dev
Kernel crashed when run fio in a RAID5 backend bcache device, the call
trace is bellow:
[  440.012034] kernel BUG at block/blk-ioc.c:146!
[  440.012696] invalid opcode: 0000 [#1] SMP NOPTI
[  440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8
[  440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16
/2015
[  440.028615] RIP: 0010:put_io_context+0x8b/0x90
[  440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246
[  440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000
0f4240
[  440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882
94fca0
[  440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8
0c1700
[  440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000
01000
[  440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11
bd1e0
[  440.035239] FS:  0000000000000000(0000) GS:ffff949cba280000(0000) knlGS:
0000000000000000
[  440.060190] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001
606e0
[  440.110498] Call Trace:
[  440.135443]  bio_disassociate_task+0x1b/0x60
[  440.160355]  bio_free+0x1b/0x60
[  440.184666]  bio_put+0x23/0x30
[  440.208272]  search_free+0x23/0x40 [bcache]
[  440.231448]  cached_dev_write_complete+0x31/0x70 [bcache]
[  440.254468]  closure_put+0xb6/0xd0 [bcache]
[  440.277087]  request_endio+0x30/0x40 [bcache]
[  440.298703]  bio_endio+0xa1/0x120
[  440.319644]  handle_stripe+0x418/0x2270 [raid456]
[  440.340614]  ? load_balance+0x17b/0x9c0
[  440.360506]  handle_active_stripes.isra.58+0x387/0x5a0 [raid456]
[  440.380675]  ? __release_stripe+0x15/0x20 [raid456]
[  440.400132]  raid5d+0x3ed/0x5d0 [raid456]
[  440.419193]  ? schedule+0x36/0x80
[  440.437932]  ? schedule_timeout+0x1d2/0x2f0
[  440.456136]  md_thread+0x122/0x150
[  440.473687]  ? wait_woken+0x80/0x80
[  440.491411]  kthread+0x102/0x140
[  440.508636]  ? find_pers+0x70/0x70
[  440.524927]  ? kthread_associate_blkcg+0xa0/0xa0
[  440.541791]  ret_from_fork+0x35/0x40
[  440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2
48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b
0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41
[  440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8
[  440.628575] ---[ end trace a1fd79d85643a73e ]--

All the crash issue happened when a bypass IO coming, in such scenario
s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the
s->orig_bio by calling bio_complete(), and after that, s->iop.bio became
invalid, then kernel would crash when calling bio_put(). Maybe its upper
layer's faulty, since bio should not be freed before we calling bio_put(),
but we'd better calling bio_put() first before calling bio_complete() to
notify upper layer ending this bio.

This patch moves bio_complete() under bio_put() to avoid kernel crash.

[mlyle: fixed commit subject for character limits]

Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Tested-by: Matthias Ferdinand <bcache@mfedv.net>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-27 10:54:28 -07:00
Coly Li 02aa8a8b2b bcache: correct flash only vols (check all uuids)
Commit 2831231d4c ("bcache: reduce cache_set devices iteration by
devices_max_used") adds c->devices_max_used to reduce iteration of
c->uuids elements, this value is updated in bcache_device_attach().

But for flash only volume, when calling flash_devs_run(), the function
bcache_device_attach() is not called yet and c->devices_max_used is not
updated. The unexpected result is, the flash only volume won't be run
by flash_devs_run().

This patch fixes the issue by iterate all c->uuids elements in
flash_devs_run(). c->devices_max_used will be updated properly when
bcache_device_attach() gets called.

[mlyle: commit subject edited for character limit]

Fixes: 2831231d4c ("bcache: reduce cache_set devices iteration by devices_max_used")
Reported-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-27 10:54:25 -07:00
Tang Junhui 73ac105be3 bcache: fix for data collapse after re-attaching an attached device
back-end device sdm has already attached a cache_set with ID
f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with
another cache set, and it returns with an error:
[root]# cd /sys/block/sdm/bcache
[root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach
-bash: echo: write error: Invalid argument

After that, execute a command to modify the label of bcache
device:
[root]# echo data_disk1 > label

Then we reboot the system, when the system power on, the back-end
device can not attach to cache_set, a messages show in the log:
Feb  5 12:05:52 ceph152 kernel: [922385.508498] bcache:
bch_cached_dev_attach() couldn't find uuid for sdm in set

In sysfs_attach(), dc->sb.set_uuid was assigned to the value
which input through sysfs, no matter whether it is success
or not in bch_cached_dev_attach(). For example, If the back-end
device has already attached to an cache set, bch_cached_dev_attach()
would fail, but dc->sb.set_uuid was changed. Then modify the
label of bcache device, it will call bch_write_bdev_super(),
which would write the dc->sb.set_uuid to the super block, so we
record a wrong cache set ID in the super block, after the system
reboot, the cache set couldn't find the uuid of the back-end
device, so the bcache device couldn't exist and use any more.

In this patch, we don't assigned cache set ID to dc->sb.set_uuid
in sysfs_attach() directly, but input it into bch_cached_dev_attach(),
and assigned dc->sb.set_uuid to the cache set ID after the back-end
device attached to the cache set successful.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Tang Junhui 7f4fc93d47 bcache: return attach error when no cache set exist
I attach a back-end device to a cache set, and the cache set is not
registered yet, this back-end device did not attach successfully, and no
error returned:
[root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach
[root]#

In sysfs_attach(), the return value "v" is initialized to "size" in
the beginning, and if no cache set exist in bch_cache_sets, the "v" value
would not change any more, and return to sysfs, sysfs regard it as success
since the "size" is a positive number.

This patch fixes this issue by assigning "v" with "-ENOENT" in the
initialization.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Coly Li 7a5e3ecbe5 bcache: set writeback_rate_update_seconds in range [1, 60] seconds
dc->writeback_rate_update_seconds can be set via sysfs and its value can
be set to [1, ULONG_MAX].  It does not make sense to set such a large
value, 60 seconds is long enough value considering the default 5 seconds
works well for long time.

Because dc->writeback_rate_update is a special delayed work, it re-arms
itself inside the delayed work routine update_writeback_rate(). When
stopping it by cancel_delayed_work_sync(), there should be a timeout to
wait and make sure the re-armed delayed work is stopped too. A small max
value of dc->writeback_rate_update_seconds is also helpful to decide a
reasonable small timeout.

This patch limits sysfs interface to set dc->writeback_rate_update_seconds
in range of [1, 60] seconds, and replaces the hand-coded number by macros.

Changelog:
v2: fix a rebase typo in v4, which is pointed out by Michael Lyle.
v1: initial version.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Tang Junhui 682811b3ce bcache: fix for allocator and register thread race
After long time running of random small IO writing,
I reboot the machine, and after the machine power on,
I found bcache got stuck, the stack is:
[root@ceph153 ~]# cat /proc/2510/task/*/stack
[<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache]
[<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache]
[<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache]
[<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache]
[<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache]
[<ffffffff810a631f>] kthread+0xcf/0xe0
[<ffffffff8164c318>] ret_from_fork+0x58/0x90
[<ffffffffffffffff>] 0xffffffffffffffff
[root@ceph153 ~]# cat /proc/2038/task/*/stack
[<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache]
[<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache]
[<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache]
[<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache]
[<ffffffff812f702f>] kobj_attr_store+0xf/0x20
[<ffffffff8125b216>] sysfs_write_file+0xc6/0x140
[<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0
[<ffffffff811e069f>] SyS_write+0x7f/0xe0
[<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1
The stack shows the register thread and allocator thread
were getting stuck when registering cache device.

I reboot the machine several times, the issue always
exsit in this machine.

I debug the code, and found the call trace as bellow:
register_bcache()
   ==>run_cache_set()
      ==>bch_journal_replay()
         ==>bch_btree_insert()
            ==>__bch_btree_map_nodes()
               ==>btree_insert_fn()
                  ==>btree_split() //node need split
                     ==>btree_check_reserve()
In btree_check_reserve(), It will check if there is enough buckets
of RESERVE_BTREE type, since allocator thread did not work yet, so
no buckets of RESERVE_BTREE type allocated, so the register thread
waits on c->btree_cache_wait, and goes to sleep.

Then the allocator thread initialized, the call trace is bellow:
bch_allocator_thread()
==>bch_prio_write()
   ==>bch_journal_meta()
      ==>bch_journal()
         ==>journal_wait_for_write()
In journal_wait_for_write(), It will check if journal is full by
journal_full(), but the long time random small IO writing
causes the exhaustion of journal buckets(journal.blocks_free=0),
In order to release the journal buckets,
the allocator calls btree_flush_write() to flush keys to
btree nodes, and waits on c->journal.wait until btree nodes writing
over or there has already some journal buckets space, then the
allocator thread goes to sleep. but in btree_flush_write(), since
bch_journal_replay() is not finished, so no btree nodes have journal
(condition "if (btree_current_write(b)->journal)" never satisfied),
so we got no btree node to flush, no journal bucket released,
and allocator sleep all the times.

Through the above analysis, we can see that:
1) Register thread wait for allocator thread to allocate buckets of
   RESERVE_BTREE type;
2) Alloctor thread wait for register thread to replay journal, so it
   can flush btree nodes and get journal bucket.
   then they are all got stuck by waiting for each other.

Hua Rui provided a patch for me, by allocating some buckets of
RESERVE_BTREE type in advance, so the register thread can get bucket
when btree node splitting and no need to waiting for the allocator
thread. I tested it, it has effect, and register thread run a step
forward, but finally are still got stuck, the reason is only 8 bucket
of RESERVE_BTREE type were allocated, and in bch_journal_replay(),
after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left,
then btree_check_reserve() is not satisfied anymore, so it goes to sleep
again, and in the same time, alloctor thread did not flush enough btree
nodes to release a journal bucket, so they all got stuck again.

So we need to allocate more buckets of RESERVE_BTREE type in advance,
but how much is enough?  By experience and test, I think it should be
as much as journal buckets. Then I modify the code as this patch,
and test in the machine, and it works.

This patch modified base on Hua Rui’s patch, and allocate more buckets
of RESERVE_BTREE type in advance to avoid register thread and allocate
thread going to wait for each other.

[patch v2] ca->sb.njournal_buckets would be 0 in the first time after
cache creation, and no journal exists, so just 8 btree buckets is OK.

Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Coly Li 7ba0d830dc bcache: set error_limit correctly
Struct cache uses io_errors for two purposes,
- Error decay: when cache set error_decay is set, io_errors is used to
  generate a small piece of delay when I/O error happens.
- I/O errors counter: in order to generate big enough value for error
  decay, I/O errors counter value is stored by left shifting 20 bits (a.k.a
  IO_ERROR_SHIFT).

In function bch_count_io_errors(), if I/O errors counter reaches cache set
error limit, bch_cache_set_error() will be called to retire the whold cache
set. But current code is problematic when checking the error limit, see the
following code piece from bch_count_io_errors(),

 90     if (error) {
 91             char buf[BDEVNAME_SIZE];
 92             unsigned errors = atomic_add_return(1 << IO_ERROR_SHIFT,
 93                                                 &ca->io_errors);
 94             errors >>= IO_ERROR_SHIFT;
 95
 96             if (errors < ca->set->error_limit)
 97                     pr_err("%s: IO error on %s, recovering",
 98                            bdevname(ca->bdev, buf), m);
 99             else
100                     bch_cache_set_error(ca->set,
101                                         "%s: too many IO errors %s",
102                                         bdevname(ca->bdev, buf), m);
103     }

At line 94, errors is right shifting IO_ERROR_SHIFT bits, now it is real
errors counter to compare at line 96. But ca->set->error_limit is initia-
lized with an amplified value in bch_cache_set_alloc(),
1545         c->error_limit  = 8 << IO_ERROR_SHIFT;

It means by default, in bch_count_io_errors(), before 8<<20 errors happened
bch_cache_set_error() won't be called to retire the problematic cache
device. If the average request size is 64KB, it means bcache won't handle
failed device until 512GB data is requested. This is too large to be an I/O
threashold. So I believe the correct error limit should be much less.

This patch sets default cache set error limit to 8, then in
bch_count_io_errors() when errors counter reaches 8 (if it is default
value), function bch_cache_set_error() will be called to retire the whole
cache set. This patch also removes bits shifting when store or show
io_error_limit value via sysfs interface.

Nowadays most of SSDs handle internal flash failure automatically by LBA
address re-indirect mapping. If an I/O error can be observed by upper layer
code, it will be a notable error because that SSD can not re-indirect
map the problematic LBA address to an available flash block. This situation
indicates the whole SSD will be failed very soon. Therefore setting 8 as
the default io error limit value makes sense, it is enough for most of
cache devices.

Changelog:
v2: add reviewed-by from Hannes.
v1: initial version for review.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Coly Li 99361bbf26 bcache: properly set task state in bch_writeback_thread()
Kernel thread routine bch_writeback_thread() has the following code block,

447         down_write(&dc->writeback_lock);
448~450     if (check conditions) {
451                 up_write(&dc->writeback_lock);
452                 set_current_state(TASK_INTERRUPTIBLE);
453
454                 if (kthread_should_stop())
455                         return 0;
456
457                 schedule();
458                 continue;
459         }

If condition check is true, its task state is set to TASK_INTERRUPTIBLE
and call schedule() to wait for others to wake up it.

There are 2 issues in current code,
1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if
   another process changes the condition and call wake_up_process(dc->
   writeback_thread), then at line 452 task state is set back to
   TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be
   waken up.
2, At line 454 if kthread_should_stop() is true, writeback kernel thread
   will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and
   call do_exit(). It is not good to enter do_exit() with task state
   TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a
   warning message is reported by __might_sleep(): "WARNING: do not call
   blocking ops when !TASK_RUNNING; state=1 set at [xxxx]".

For the first issue, task state should be set before condition checks.
Ineed because dc->writeback_lock is required when modifying all the
conditions, calling set_current_state() inside code block where dc->
writeback_lock is hold is safe. But this is quite implicit, so I still move
set_current_state() before all the condition checks.

For the second issue, frankley speaking it does not hurt when kernel thread
exits with TASK_INTERRUPTIBLE state, but this warning message scares users,
makes them feel there might be something risky with bcache and hurt their
data.  Setting task state to TASK_RUNNING before returning fixes this
problem.

In alloc.c:allocator_wait(), there is also a similar issue, and is also
fixed in this patch.

Changelog:
v3: merge two similar fixes into one patch
v2: fix the race issue in v1 patch.
v1: initial buggy fix.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Tang Junhui c4dc2497d5 bcache: fix high CPU occupancy during journal
After long time small writing I/O running, we found the occupancy of CPU
is very high and I/O performance has been reduced by about half:

[root@ceph151 internal]# top
top - 15:51:05 up 1 day,2:43,  4 users,  load average: 16.89, 15.15, 16.53
Tasks: 2063 total,   4 running, 2059 sleeping,   0 stopped,   0 zombie
%Cpu(s):4.3 us, 17.1 sy 0.0 ni, 66.1 id, 12.0 wa,  0.0 hi,  0.5 si,  0.0 st
KiB Mem : 65450044 total, 24586420 free, 38909008 used,  1954616 buff/cache
KiB Swap: 65667068 total, 65667068 free,        0 used. 25136812 avail Mem

  PID USER PR NI    VIRT    RES    SHR S %CPU %MEM     TIME+ COMMAND
 2023 root 20  0       0      0      0 S 55.1  0.0   0:04.42 kworker/11:191
14126 root 20  0       0      0      0 S 42.9  0.0   0:08.72 kworker/10:3
 9292 root 20  0       0      0      0 S 30.4  0.0   1:10.99 kworker/6:1
 8553 ceph 20  0 4242492 1.805g  18804 S 30.0  2.9 410:07.04 ceph-osd
12287 root 20  0       0      0      0 S 26.7  0.0   0:28.13 kworker/7:85
31019 root 20  0       0      0      0 S 26.1  0.0   1:30.79 kworker/22:1
 1787 root 20  0       0      0      0 R 25.7  0.0   5:18.45 kworker/8:7
32169 root 20  0       0      0      0 S 14.5  0.0   1:01.92 kworker/23:1
21476 root 20  0       0      0      0 S 13.9  0.0   0:05.09 kworker/1:54
 2204 root 20  0       0      0      0 S 12.5  0.0   1:25.17 kworker/9:10
16994 root 20  0       0      0      0 S 12.2  0.0   0:06.27 kworker/5:106
15714 root 20  0       0      0      0 R 10.9  0.0   0:01.85 kworker/19:2
 9661 ceph 20  0 4246876 1.731g  18800 S 10.6  2.8 403:00.80 ceph-osd
11460 ceph 20  0 4164692 2.206g  18876 S 10.6  3.5 360:27.19 ceph-osd
 9960 root 20  0       0      0      0 S 10.2  0.0   0:02.75 kworker/2:139
11699 ceph 20  0 4169244 1.920g  18920 S 10.2  3.1 355:23.67 ceph-osd
 6843 ceph 20  0 4197632 1.810g  18900 S  9.6  2.9 380:08.30 ceph-osd

The kernel work consumed a lot of CPU, and I found they are running journal
work, The journal is reclaiming source and flush btree node with surprising
frequency.

Through further analysis, we found that in btree_flush_write(), we try to
get a btree node with the smallest fifo idex to flush by traverse all the
btree nodein c->bucket_hash, after we getting it, since no locker protects
it, this btree node may have been written to cache device by other works,
and if this occurred, we retry to traverse in c->bucket_hash and get
another btree node. When the problem occurrd, the retry times is very high,
and we consume a lot of CPU in looking for a appropriate btree node.

In this patch, we try to record 128 btree nodes with the smallest fifo idex
in heap, and pop one by one when we need to flush btree node. It greatly
reduces the time for the loop to find the appropriate BTREE node, and also
reduce the occupancy of CPU.

[note by mpl: this triggers a checkpatch error because of adjacent,
pre-existing style violations]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Tang Junhui a728eacbbd bcache: add journal statistic
Sometimes, Journal takes up a lot of CPU, we need statistics
to know what's the journal is doing. So this patch provide
some journal statistics:
1) reclaim: how many times the journal try to reclaim resource,
   usually the journal bucket or/and the pin are exhausted.
2) flush_write: how many times the journal try to flush btree node
   to cache device, usually the journal bucket are exhausted.
3) retry_flush_write: how many times the journal retry to flush
   the next btree node, usually the previous tree node have been
   flushed by other thread.
we show these statistic by sysfs interface. Through these statistics
We can totally see the status of journal module when the CPU is too
high.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 12:50:01 -07:00
Michael Lyle 3609c471a1 bcache: closures: move control bits one bit right
Otherwise, architectures that do negated adds of atomics (e.g. s390)
to do atomic_sub fail in closure_set_stopped.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 12:18:51 -07:00
Michael Lyle 616486ab52 bcache: fix writeback target calc on large devices
Bcache needs to scale the dirty data in the cache over the multiple
backing disks in order to calculate writeback rates for each.
The previous code did this by multiplying the target number of dirty
sectors by the backing device size, and expected it to fit into a
uint64_t; this blows up on relatively small backing devices.

The new approach figures out the bdev's share in 16384ths of the overall
cached data.  This is chosen to cope well when bdevs drastically vary in
size and to ensure that bcache can cross the petabyte boundary for each
backing device.

This has been improved based on Tang Junhui's feedback to ensure that
every device gets a share of dirty data, no matter how small it is
compared to the total backing pool.

The existing mechanism is very limited; this is purely a bug fix to
remove limits on volume size.  However, there still needs to be change
to make this "fair" over many volumes where some are idle.

Reported-by: Jack Douglas <jack@douglastechnology.co.uk>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Coly Li 5138ac6748 bcache: fix misleading error message in bch_count_io_errors()
Bcache only does recoverable I/O for read operations by calling
cached_dev_read_error(). For write opertions there is no I/O recovery for
failed requests.

But in bch_count_io_errors() no matter read or write I/Os, before errors
counter reaches io error limit, pr_err() always prints "IO error on %,
recoverying". For write requests this information is misleading, because
there is no I/O recovery at all.

This patch adds a parameter 'is_read' to bch_count_io_errors(), and only
prints "recovering" by pr_err() when the bio direction is READ.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Coly Li 2831231d4c bcache: reduce cache_set devices iteration by devices_max_used
Member devices of struct cache_set is used to reference all attached
bcache devices to this cache set. If it is treated as array of pointers,
size of devices[] is indicated by member nr_uuids of struct cache_set.

nr_uuids is calculated in drivers/md/super.c:bch_cache_set_alloc(),
	bucket_bytes(c) / sizeof(struct uuid_entry)
Bucket size is determined by user space tool "make-bcache", by default it
is 1024 sectors (defined in bcache-tools/make-bcache.c:main()). So default
nr_uuids value is 4096 from the above calculation.

Every time when bcache code iterates bcache devices of a cache set, all
the 4096 pointers are checked even only 1 bcache device is attached to the
cache set, that's a wast of time and unncessary.

This patch adds a member devices_max_used to struct cache_set. Its value
is 1 + the maximum used index of devices[] in a cache set. When iterating
all valid bcache devices of a cache set, use c->devices_max_used in
for-loop may reduce a lot of useless checking.

Personally, my motivation of this patch is not for performance, I use it
in bcache debugging, which helps me to narrow down the scape to check
valid bcached devices of a cache set.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Zhai Zhaoxuan b40503ea4f bcache: fix unmatched generic_end_io_acct() & generic_start_io_acct()
The function cached_dev_make_request() and flash_dev_make_request() call
generic_start_io_acct() with (struct bcache_device)->disk when they start a
closure. Then the function bio_complete() calls generic_end_io_acct() with
(struct search)->orig_bio->bi_disk when the closure has done.
Since the `bi_disk` is not the bcache device, the generic_end_io_acct() is
called with a wrong device queue.

It causes the "inflight" (in struct hd_struct) counter keep increasing
without decreasing.

This patch fix the problem by calling generic_end_io_acct() with
(struct bcache_device)->disk.

Signed-off-by: Zhai Zhaoxuan <kxuanobj@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Kent Overstreet ce439bf78b bcache: mark closure_sync() __sched
[edit by mlyle: include sched/debug.h to get __sched]

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Kent Overstreet e4bf791937 bcache: Fix, improve efficiency of closure_sync()
Eliminates cases where sync can race and fail to complete / get stuck.
Removes many status flags and simplifies entering-and-exiting closure
sleeping behaviors.

[mlyle: fixed conflicts due to changed return behavior in mainline.
extended commit comment, and squashed down two commits that were mostly
contradictory to get to this state.  Changed __set_current_state to
set_current_state per Jens review comment]

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Michael Lyle b1092c9af9 bcache: allow quick writeback when backing idle
If the control system would wait for at least half a second, and there's
been no reqs hitting the backing disk for awhile: use an alternate mode
where we have at most one contiguous set of writebacks in flight at a
time. (But don't otherwise delay).  If front-end IO appears, it will
still be quick, as it will only have to contend with one real operation
in flight.  But otherwise, we'll be sending data to the backing disk as
quickly as it can accept it (with one op at a time).

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Michael Lyle 6e6ccc67b9 bcache: writeback: properly order backing device IO
Writeback keys are presently iterated and dispatched for writeback in
order of the logical block address on the backing device.  Multiple may
be, in parallel, read from the cache device and then written back
(especially when there are contiguous I/O).

However-- there was no guarantee with the existing code that the writes
would be issued in LBA order, as the reads from the cache device are
often re-ordered.  In turn, when writing back quickly, the backing disk
often has to seek backwards-- this slows writeback and increases
utilization.

This patch introduces an ordering mechanism that guarantees that the
original order of issue is maintained for the write portion of the I/O.
Performance for writeback is significantly improved when there are
multiple contiguous keys or high writeback rates.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Tested-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Tang Junhui 539d39eb27 bcache: fix wrong return value in bch_debug_init()
in bch_debug_init(), ret is always 0, and the return value is useless,
change it to return 0 if be success after calling debugfs_create_dir(),
else return a non-zero value.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Tang Junhui 4eca1cb28d bcache: segregate flash only volume write streams
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |

So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.

In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.

Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.

[mlyle: fixed commit log formatting, permissions, line endings]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Vasyl Gomonovych 9d13411784 bcache: Use PTR_ERR_OR_ZERO()
Fix ptr_ret.cocci warnings:
drivers/md/bcache/btree.c:1800:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Tang Junhui 8d29c4426b bcache: stop writeback thread after detaching
Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo  ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.

Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.

[edit by mlyle: commit log spelling/formatting]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Rui Hua b221fc130c bcache: ret IOERR when read meets metadata error
The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0.  In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:

1. Because the btree is not totally cached in memery, we maybe get error
   when read btree node from cache device (see bch_btree_node_get()), the
   likely errno is -EIO, -ENOMEM

2. When read miss happens, bch_btree_insert_check_key() will be called to
   insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
   doing preparatory work before insert the missed data to cache device),
   a failure can also happen in this situation, the likely errno is
   -ENOMEM

bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean.  And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.

[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]

Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-08 13:29:00 -07:00
Ming Lei 25d8be77e1 block: move bio_alloc_pages() to bcache
bcache is the only user of bio_alloc_pages(), so move this function into
bcache, and avoid it being misused in the future.

Also rename it to bch_bio_allo_pages() since it is bcache only.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Ming Lei c2421edf5f bcache: comment on direct access to bvec table
All direct access to bvec table are safe even after multipage bvec is
supported.

Cc: linux-bcache@vger.kernel.org
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Ming Lei 263663cd3c block: convert to bio_first_bvec_all & bio_first_page_all
This patch converts to bio_first_bvec_all() & bio_first_page_all() for
retrieving the 1st bvec/page, and prepares for supporting multipage bvec.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Michael Lyle 6c4ca1e36c bcache: check return value of register_shrinker
register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.

This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24 16:23:01 -07:00
Rui Hua e393aa2446 bcache: recover data from backing when data is clean
When we send a read request and hit the clean data in cache device, there
is a situation called cache read race in bcache(see the commit in the tail
of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight,
and we could then end up reading the wrong data. We guard against this
by checking (in bch_cache_read_endio()) if the pointer is stale again;
if so, we treat it as an error (s->iop.error = -EINTR) and reread from
the backing device (but we don't pass that error up anywhere)

It should be noted that cache read race happened under normal
circumstances, not the circumstance when SSD failed, it was counted
and shown in  /sys/fs/bcache/XXX/internal/cache_read_races.

Without this patch, when we use writeback mode, we will never reread from
the backing device when cache read race happened, until the whole cache
device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in
cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR)
will be passed up, at last, user will receive -EINTR when it's bio end,
this is not suitable, and wield to up-application.

In this patch, we use s->read_dirty_data to judge whether the read
request hit dirty data in cache device, it is safe to reread data from
the backing device when the read request hit clean data. This can not
only handle cache read race, but also recover data when failed read
request from cache device.

[edited by mlyle to fix up whitespace, commit log title, comment
spelling]

Fixes: d59b237959 ("bcache: only permit to recovery read error when cache device is clean")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24 16:22:59 -07:00
Huacai Chen cf33c1ee52 bcache: Fix building error on MIPS
This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the PTR macro, which conflicts with the PTR macro
in include/uapi/linux/bcache.h.

[fixed by mlyle: corrected a line-length issue]

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24 16:22:58 -07:00
Tang Junhui bb22cafd75 bcache: add a comment in journal bucket reading
Journal bucket is a circular buffer, the bucket
can be like YYYNNNYY, which means the first valid journal in
the 7th bucket, and the latest valid journal in third bucket, in
this case, if we do not try we the zero index first, We
may get a valid journal in the 7th bucket, then we call
find_next_bit(bitmap,ca->sb.njournal_buckets, l + 1) to get the
first invalid bucket after the 7th bucket, because all these
buckets is valid, so no bit 1 in bitmap, thus find_next_bit()
function would return with ca->sb.njournal_buckets (8). So, after
that, bcache only read journal in 7th and 8the bucket,
the first to the third buckets are lost.

So, it is important to let developer know that, we need to try
the zero index at first in the hash-search, and avoid any breaks
in future's code modification.

[ML: Fixed whitespace & formatting & file permissions]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24 16:22:55 -07:00
Kees Cook 8376d3c1f9 md: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: linux-bcache@vger.kernel.org
Cc: linux-raid@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14 20:11:57 -07:00
Linus Torvalds e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Liang Chen 330a4db89d bcache: explicitly destroy mutex while exiting
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.

As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-30 15:57:54 -06:00
tang.junhui c157313791 bcache: fix wrong cache_misses statistics
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.

[ML: applied by 3-way merge]

Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-30 15:57:54 -06:00
Tang Junhui d44c2f9e7c bcache: update bucket_in_use in real time
bucket_in_use is updated in gc thread which triggered by invalidating or
writing sectors_to_gc dirty data, It's a long interval. Therefore, when we
use it to compare with the threshold, it is often not timely, which leads
to inaccurate judgment and often results in bucket depletion.

We have send a patch before, by the means of updating bucket_in_use
periodically In gc thread, which Coly thought that would lead high
latency, In this patch, we add avail_nbuckets to record the count of
available buckets, and we calculate bucket_in_use when alloc or free
bucket in real time.

[edited by ML: eliminated some whitespace errors]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-30 15:57:54 -06:00
Elena Reshetova 3b304d24a7 bcache: convert cached_dev.count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable cached_dev.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-30 15:57:54 -06:00
Coly Li d59b237959 bcache: only permit to recovery read error when cache device is clean
When bcache does read I/Os, for example in writeback or writethrough mode,
if a read request on cache device is failed, bcache will try to recovery
the request by reading from cached device. If the data on cached device is
not synced with cache device, then requester will get a stale data.

For critical storage system like database, providing stale data from
recovery may result an application level data corruption, which is
unacceptible.

With this patch, for a failed read request in writeback or writethrough
mode, recovery a recoverable read request only happens when cache device
is clean. That is to say, all data on cached device is up to update.

For other cache modes in bcache, read request will never hit
cached_dev_read_error(), they don't need this patch.

Please note, because cache mode can be switched arbitrarily in run time, a
writethrough mode might be switched from a writeback mode. Therefore
checking dc->has_data in writethrough mode still makes sense.

Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
    bug to fix, and option to permit it is unnecessary. So this version
    the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure  to
    allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.

[small change to patch comment spelling by mlyle]

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Arne Wolf <awolf@lenovo.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Kai Krakow <hurikhan77@gmail.com>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-30 15:57:54 -06:00
Michael Lyle 9ce762e85b bcache: writeback rate clamping: make 32 bit safe
Sorry this got through to linux-block, was detected by the kbuilds test
robot.  NSEC_PER_SEC is a long constant; 2.5 * 10^9 doesn't fit in a
signed long constant.

Fixes: e41166c5c4 ("bcache: writeback rate shouldn't artifically clamp")
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 13:00:10 -06:00
Liang Chen 6446c684f9 bcache: safeguard a dangerous addressing in closure_queue
The use of the union reduces the size of closure struct by taking advantage
of the current size of its members. The offset of func in work_struct
equals the size of the first three members, so that work.work_func will
just reference the forth member - fn.

This is smart but dangerous. It can be broken if work_struct or the other
structs get changed, and can be a bit difficult to debug.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Michael Lyle a8500fc816 bcache: rearrange writeback main thread ratelimit
The time spent searching for things to write back "counts" for the
actual rate achieved, so don't flush the accumulated rate with each
chunk.

This will maintain better fidelity to user-commanded rates, but it
may slightly increase the burstiness of writeback.  The writeback
lock needs improvement to help mitigate this.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Michael Lyle e41166c5c4 bcache: writeback rate shouldn't artifically clamp
The previous code artificially limited writeback rate to 1000000
blocks/second (NSEC_PER_MSEC), which is a rate that can be met on fast
hardware.  The rate limiting code works fine (though with decreased
precision) up to 3 orders of magnitude faster, so use NSEC_PER_SEC.

Additionally, ensure that uint32_t is used as a type for rate throughout
the rate management so that type checking/clamp_t can work properly.

bch_next_delay should be rewritten for increased precision and better
handling of high rates and long sleep periods, but this is adequate for
now.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Coly Li <colyli@suse.de>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Michael Lyle ae82ddbfeb bcache: smooth writeback rate control
This works in conjunction with the new PI controller.  Currently, in
real-world workloads, the rate controller attempts to write back 1
sector per second.  In practice, these minimum-rate writebacks are
between 4k and 60k in test scenarios, since bcache aggregates and
attempts to do contiguous writes and because filesystems on top of
bcachefs typically write 4k or more.

Previously, bcache used to guarantee to write at least once per second.
This means that the actual writeback rate would exceed the configured
amount by a factor of 8-120 or more.

This patch adjusts to be willing to sleep up to 2.5 seconds, and to
target writing 4k/second.  On the smallest writes, it will sleep 1
second like before, but many times it will sleep longer and load the
backing device less.  This keeps the loading on the cache and backing
device related to writeback more consistent when writing back at low
rates.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Michael Lyle 1d316e6583 bcache: implement PI controller for writeback rate
bcache uses a control system to attempt to keep the amount of dirty data
in cache at a user-configured level, while not responding excessively to
transients and variations in write rate.  Previously, the system was a
PD controller; but the output from it was integrated, turning the
Proportional term into an Integral term, and turning the Derivative term
into a crude Proportional term.  Performance of the controller has been
uneven in production, and it has tended to respond slowly, oscillate,
and overshoot.

This patch set replaces the current control system with an explicit PI
controller and tuning that should be correct for most hardware.  By
default, it attempts to write at a rate that would retire 1/40th of the
current excess blocks per second.  An integral term in turn works to
remove steady state errors.

IMO, this yields benefits in simplicity (removing weighted average
filtering, etc) and system performance.

Another small change is a tunable parameter is introduced to allow the
user to specify a minimum rate at which dirty blocks are retired.

There is a slight difference from earlier versions of the patch in
integral handling to prevent excessive negative integral windup.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Michael Lyle 5fa89fb9a8 bcache: don't write back data if reading it failed
If an IO operation fails, and we didn't successfully read data from the
cache, don't writeback invalid/partial data to the backing disk.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Yijing Wang 238501027a bcache: remove unused parameter
Parameter bio is no longer used, clean it.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Eric Wheeler b41c9b0266 bcache: update bio->bi_opf bypass/writeback REQ_ flag hints
Flag for bypass if the IO is for read-ahead or background, unless the
read-ahead request is for metadata (eg, from gfs2).
        Bypass if:
                bio->bi_opf & (REQ_RAHEAD|REQ_BACKGROUND) &&
			!(bio->bi_opf & REQ_META))

        Writeback if:
                op_is_sync(bio->bi_opf) ||
			bio->bi_opf & (REQ_META|REQ_PRIO)

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Yijing Wang e89d67596e bcache: Remove redundant set_capacity
set_capacity() has been called in bcache_device_init(),
remove the redundant one.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Coly Li 1dbe32ad0a bcache: rewrite multiple partitions support
Current partition support of bcache is confusing and buggy. It tries to
trace non-continuous device minor numbers by an ida bit string, and
mistakenly mixed bcache device index with minor numbers. This design
generates several negative results,
- Index of bcache device name is not consecutive under /dev/. If there are
  3 bcache devices, they name will be,
  /dev/bcache0, /dev/bcache16, /dev/bcache32
  Only bcache code indexes bcache device name is such an interesting way.
- First minor number of each bcache device is traced by ida bit string.
  One bcache device will occupy 16 bits, this is not a good idea. Indeed
  only one bit is enough.
- Because minor number and bcache device index are mixed, a device index
  is allocated by ida_simple_get(), but an first minor number is sent into
  ida_simple_remove() to release the device. It confused original author
  too.

Root cause of the above errors is, bcache code should not handle device
minor numbers at all! A standard process to support multiple partitions in
Linux kernel is,
- Device driver provides major device number, and indexes multiple device
  instances.
- Device driver does not allocat nor trace device minor number, only
  provides a first minor number of a given device instance, and sets how
  many minor numbers (paritions) the device instance may have.
All rested stuffs are handled by block layer code, most of the details can
be found from block/{genhd, partition-generic}.c files.

This patch re-writes multiple partitions support for bcache. It makes
whole things to be more clear, and uses ida bit string in a more efficeint
way.
- Ida bit string only traces bcache device index, not minor number. For a
  bcache device with 128 partitions, only one bit in ida bit string is
  enough.
- Device minor number and device index are separated in concept. Device
  index is used for /dev node naming, and ida bit string trace. Minor
  number is calculated from device index and only used to initialize
  first_minor of a bcache device.
- It does not follow any standard for 16 partitions on a bcache device.
  This patch sets 128 partitions on single bcache device at max, this is
  the limitation from GPT (GUID Partition Table) and supported by fdisk.

Considering a typical device minor number is 20 bits width, each bcache
device may have 128 partitions (7 bits), there can be 8192 bcache devices
existing on system. For most common deployment for a single server in
now days, it should be enough.

[minor spelling fixes in commit message by Michael Lyle]

Signed-off-by: Coly Li <colyli@suse.de>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Coly Li b1e8139e48 bcache: fix a comments typo in bch_alloc_sectors()
Code comments in alloc.c:bch_alloc_sectors() mentions a function
name find_data_bucket(), the correct function name should be
pick_data_bucket() indeed. bch_alloc_sectors() is a quite important
function in bcache allocation code, fixing the typo may help
other people to have less confusion.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Coly Li 91af8300d9 bcache: check ca->alloc_thread initialized before wake up it
In bcache code, sysfs entries are created before all resources get
allocated, e.g. allocation thread of a cache set.

There is posibility for NULL pointer deference if a resource is accessed
but which is not initialized yet. Indeed Jorg Bornschein catches one on
cache set allocation thread and gets a kernel oops.

The reason for this bug is, when bch_bucket_alloc() is called during
cache set registration and attaching, ca->alloc_thread is not properly
allocated and initialized yet, call wake_up_process() on ca->alloc_thread
triggers NULL pointer deference failure. A simple and fast fix is, before
waking up ca->alloc_thread, checking whether it is allocated, and only
wake up ca->alloc_thread when it is not NULL.

Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Jorg Bornschein <jb@capsec.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Peter Foley 58f913dce2 bcache: Avoid nested function definition
Fixes below error with clang:
../drivers/md/bcache/sysfs.c:759:3: error: function definition is not allowed here
                {       return *((uint16_t *) r) - *((uint16_t *) l); }
                ^
../drivers/md/bcache/sysfs.c:789:32: error: use of undeclared identifier 'cmp'
                sort(p, n, sizeof(uint16_t), cmp, NULL);
                                             ^
2 errors generated.

v2:
rename function to __bch_cache_cmp

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-16 09:07:26 -06:00
Coly Li a5f3d8a5ea bcache: use llist_for_each_entry_safe() in __closure_wake_up()
Commit 09b3efec ("bcache: Don't reinvent the wheel but use existing llist
API") replaces the following while loop by llist_for_each_entry(),

-
-	while (reverse) {
-		cl = container_of(reverse, struct closure, list);
-		reverse = llist_next(reverse);
-
+	llist_for_each_entry(cl, reverse, list) {
 		closure_set_waiting(cl, 0);
 		closure_sub(cl, CLOSURE_WAITING + 1);
 	}

This modification introduces a potential race by iterating a corrupted
list. Here is how it happens.

In the above modification, closure_sub() may wake up a process which is
waiting on reverse list. If this process decides to wait again by calling
closure_wait(), its cl->list will be added to another wait list. Then
when llist_for_each_entry() continues to iterate next node, it will travel
on another new wait list which is added in closure_wait(), not the
original reverse list in __closure_wake_up(). It is more probably to
happen on UP machine because the waked up process may preempt the process
which wakes up it.

Use llist_for_each_entry_safe() will fix the issue, the safe version fetch
next node before waking up a process. Then the copy of next node will make
sure list iteration stays on original reverse list.

Fixes: 09b3efec81 ("bcache: Don't reinvent the wheel but use existing llist API")
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-27 14:54:49 -06:00
Tang Junhui 175206cf9a bcache: initialize dirty stripes in flash_dev_run()
bcache uses a Proportion-Differentiation Controller algorithm to control
writeback rate to cached devices. In the PD controller algorithm, dirty
stripes of thin flash device should not be counted in, because flash only
volumes never write back dirty data.

Currently dirty stripe counter for thin flash device is not initialized
when the thin flash device starts. Which means the following calculation
in PD controller will reference an undefined dirty stripes number, and
all cached devices attached to the same cache set where the thin flash
device lies on may have an inaccurate writeback rate.

This patch calles bch_sectors_dirty_init() in flash_dev_run(), to
correctly initialize dirty stripe counter when the thin flash device
starts to run. This patch also does following parameter data type change,
 -void bch_sectors_dirty_init(struct cached_dev *dc);
 +void bch_sectors_dirty_init(struct bcache_device *);
to call this function conveniently in flash_dev_run().

(Commit log is composed by Coly Li)

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-07 13:32:29 -06:00
Michael Lyle 9276717b9e bcache: fix bch_hprint crash and improve output
Most importantly, solve a crash where %llu was used to format signed
numbers.  This would cause a buffer overflow when reading sysfs
writeback_rate_debug, as only 20 bytes were allocated for this and
%llu writes 20 characters plus a null.

Always use the units mechanism rather than having different output
paths for simplicity.

Also, correct problems with display output where 1.10 was a larger
number than 1.09, by multiplying by 10 and then dividing by 1024 instead
of dividing by 100.  (Remainders of >= 1000 would print as .10).

Minor changes: Always display the decimal point instead of trying to
omit it based on number of digits shown.  Decide what units to use
based on 1000 as a threshold, not 1024 (in other words, always print
at most 3 digits before the decimal point).

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Dan Carpenter 7b6a8570e0 bcache: Update continue_at() documentation
continue_at() doesn't have a return statement anymore.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Dan Carpenter da22f0eea5 bcache: silence static checker warning
In olden times, closure_return() used to have a hidden return built in.
We removed the hidden return but forgot to add a new return here.  If
"c" were NULL we would oops on the next line, but fortunately "c" is
never NULL.  Let's just remove the if statement.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui 9baf30972b bcache: fix for gc and write-back race
gc and write-back get raced (see the email "bcache get stucked" I sended
before):
gc thread                               write-back thread
|                                       |bch_writeback_thread()
|bch_gc_thread()                        |
|                                       |==>read_dirty()
|==>bch_btree_gc()                      |
|==>btree_root() //get btree root       |
|                //node write locker    |
|==>bch_btree_gc_root()                 |
|                                       |==>read_dirty_submit()
|                                       |==>write_dirty()
|                                       |==>continue_at(cl,
|                                       |               write_dirty_finish,
|                                       |               system_wq);
|                                       |==>write_dirty_finish()//excute
|                                       |               //in system_wq
|                                       |==>bch_btree_insert()
|                                       |==>bch_btree_map_leaf_nodes()
|                                       |==>__bch_btree_map_nodes()
|                                       |==>btree_root //try to get btree
|                                       |              //root node read
|                                       |              //lock
|                                       |-----stuck here
|==>bch_btree_set_root()
|==>bch_journal_meta()
|==>bch_journal()
|==>journal_try_write()
|==>journal_write_unlocked() //journal_full(&c->journal)
|                            //condition satisfied
|==>continue_at(cl, journal_write, system_wq); //try to excute
|                               //journal_write in system_wq
|                               //but work queue is excuting
|                               //write_dirty_finish()
|==>closure_sync(); //wait journal_write execute
|                   //over and wake up gc,
|-------------stuck here
|==>release root node write locker

This patch alloc a separate work-queue for write-back thread to avoid such
race.

(Commit log re-organized by Coly Li to pass checkpatch.pl checking)

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui 89b1fc54c2 bcache: increase the number of open buckets
In currently, we only alloc 6 open buckets for each cache set,
but in usually, we always attach about 10 or so backend devices for
each cache set, and the each bcache device are always accessed by
about 10 or so threads in top application layer. So 6 open buckets
are too few, It has led to that each of the same thread write data
to different buckets, which would cause low efficiency write-back,
and also cause buckets inefficient, and would be Very easy to run
out of.

I add debug message in bch_open_buckets_alloc() to print alloc bucket
info, and test with ten bcache devices with a cache set, and each
bcache device is accessed by ten threads.

From the debug message, we can see that, after the modification, One
bucket is more likely to assign to the same thread, and the data from
the same thread are more likely to write the same bucket. Usually the
same thread always write/read the same backend device, so it is good
for write-back and also promote the usage efficiency of buckets.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tony Asleson 77fa100f27 bcache: Correct return value for sysfs attach errors
If you encounter any errors in bch_cached_dev_attach it will return
a negative error code.  The variable 'v' which stores the result is
unsigned, thus user space sees a very large value returned for bytes
written which can cause incorrect user space behavior.  Utilize 1
signed variable to use throughout the function to preserve error return
capability.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui a8394090a9 bcache: correct cache_dirty_target in __update_writeback_rate()
__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.

bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)

The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.

A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.

Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.

This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().

(Commit log composed by Coly Li to pass checkpatch.pl checking)

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui 0b43f49dc4 bcache: gc does not work when triggering by manual command
I try to execute the following command to trigger gc thread:
[root@localhost internal]# echo 1 > trigger_gc
But it does not work, I debug the code in gc_should_run(), It works only
if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to
meet the condition when we trigger gc by manual command.

(Code comments aded by Coly Li)

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Byungchul Park 09b3efec81 bcache: Don't reinvent the wheel but use existing llist API
Although llist provides proper APIs, they are not used. Make them used.

Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui 69daf03ade bcache: do not subtract sectors_to_gc for bypassed IO
Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to
trigger gc thread.

Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Tang Junhui c81ffa32a2 bcache: fix sequential large write IO bypass
Sequential write IOs were tested with bs=1M by FIO in writeback cache
mode, these IOs were expected to be bypassed, but actually they did not.
We debug the code, and find in check_should_bypass():
    if (!congested &&
        mode == CACHE_MODE_WRITEBACK &&
        op_is_write(bio_op(bio)) &&
        (bio->bi_opf & REQ_SYNC))
        goto rescale
that means, If in writeback mode, a write IO with REQ_SYNC flag will not
be bypassed though it is a sequential large IO, It's not a correct thing
to do actually, so this patch remove these codes.

Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Jan Kara 4b758df21e bcache: Fix leak of bdev reference
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the
block device using lookup_bdev() to detect which situation we are in to
properly report error. However we never drop the reference returned to
us from lookup_bdev(). Fix that.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:17:33 -06:00
Christoph Hellwig 74d46992e0 block: replace bi_bdev with a gendisk pointer and partitions index
This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 12:49:55 -06:00
Jens Axboe d62e26b3ff block: pass in queue to inflight accounting
No functional change in this patch, just in preparation for
basing the inflight mechanism on the queue in question.

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09 13:09:16 -06:00
Linus Torvalds 9bd42183b9 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Add the SYSTEM_SCHEDULING bootup state to move various scheduler
     debug checks earlier into the bootup. This turns silent and
     sporadically deadly bugs into nice, deterministic splats. Fix some
     of the splats that triggered. (Thomas Gleixner)

   - A round of restructuring and refactoring of the load-balancing and
     topology code (Peter Zijlstra)

   - Another round of consolidating ~20 of incremental scheduler code
     history: this time in terms of wait-queue nomenclature. (I didn't
     get much feedback on these renaming patches, and we can still
     easily change any names I might have misplaced, so if anyone hates
     a new name, please holler and I'll fix it.) (Ingo Molnar)

   - sched/numa improvements, fixes and updates (Rik van Riel)

   - Another round of x86/tsc scheduler clock code improvements, in hope
     of making it more robust (Peter Zijlstra)

   - Improve NOHZ behavior (Frederic Weisbecker)

   - Deadline scheduler improvements and fixes (Luca Abeni, Daniel
     Bristot de Oliveira)

   - Simplify and optimize the topology setup code (Lauro Ramos
     Venancio)

   - Debloat and decouple scheduler code some more (Nicolas Pitre)

   - Simplify code by making better use of llist primitives (Byungchul
     Park)

   - ... plus other fixes and improvements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  sched/cputime: Refactor the cputime_adjust() code
  sched/debug: Expose the number of RT/DL tasks that can migrate
  sched/numa: Hide numa_wake_affine() from UP build
  sched/fair: Remove effective_load()
  sched/numa: Implement NUMA node level wake_affine()
  sched/fair: Simplify wake_affine() for the single socket case
  sched/numa: Override part of migrate_degrades_locality() when idle balancing
  sched/rt: Move RT related code from sched/core.c to sched/rt.c
  sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
  sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
  sched/fair: Spare idle load balancing on nohz_full CPUs
  nohz: Move idle balancer registration to the idle path
  sched/loadavg: Generalize "_idle" naming to "_nohz"
  sched/core: Drop the unused try_get_task_struct() helper function
  sched/fair: WARN() and refuse to set buddy when !se->on_rq
  sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
  sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
  sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
  sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
  sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
  ...
2017-07-03 13:08:04 -07:00
Ingo Molnar ac6424b981 sched/wait: Rename wait_queue_t => wait_queue_entry_t
Rename:

	wait_queue_t		=>	wait_queue_entry_t

'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.

Start sorting this out by renaming it to 'wait_queue_entry_t'.

This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 12:18:27 +02:00
NeilBrown 5a136fdf5a bcache: use kmalloc to allocate bio in bch_data_verify()
This function allocates a bio, then a collection
of pages.  It copes with failure.

It currently uses a mempool() to allocate the bio,
but alloc_page() to allocate the pages.  These fail
in different ways, so the usage is inconsistent.

Change the bio_clone() to bio_clone_kmalloc()
so that no pool is used either for the bio or the pages.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by : Ming Lei <ming.lei@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 12:40:59 -06:00
NeilBrown 47e0fb461f blk: make the bioset rescue_workqueue optional.
This patch converts bioset_create() to not create a workqueue by
default, so alloctions will never trigger punt_bios_to_rescuer().  It
also introduces a new flag BIOSET_NEED_RESCUER which tells
bioset_create() to preserve the old behavior.

All callers of bioset_create() that are inside block device drivers,
are given the BIOSET_NEED_RESCUER flag.

biosets used by filesystems or other top-level users do not
need rescuing as the bio can never be queued behind other
bios.  This includes fs_bio_set, blkdev_dio_pool,
btrfs_bioset, xfs_ioend_bioset, and one allocated by
target_core_iblock.c.

biosets used by md/raid do not need rescuing as
their usage was recently audited and revised to never
risk deadlock.

It is hoped that most, if not all, of the remaining biosets
can end up being the non-rescued version.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Credit-to: Ming Lei <ming.lei@redhat.com> (minor fixes)
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 12:40:59 -06:00
NeilBrown 011067b056 blk: replace bioset_create_nobvec() with a flags arg to bioset_create()
"flags" arguments are often seen as good API design as they allow
easy extensibility.
bioset_create_nobvec() is implemented internally as a variation in
flags passed to __bioset_create().

To support future extension, make the internal structure part of the
API.
i.e. add a 'flags' argument to bioset_create() and discard
bioset_create_nobvec().

Note that the bio_split allocations in drivers/md/raid* do not need
the bvec mempool - they should have used bioset_create_nobvec().

Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18 12:40:59 -06:00
Christoph Hellwig 4e4cbee93d block: switch bios to blk_status_t
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09 09:27:32 -06:00
Michal Hocko bc4e54f6e9 drivers/md/bcache/super.c: use kvmalloc
bcache_device_init uses kmalloc for small requests and vmalloc for those
which are larger than 64 pages.  This alone is a strange criterion.
Moreover kmalloc can fallback to vmalloc on the failure.  Let's simply
use kvmalloc instead as it knows how to handle the fallback properly

Link: http://lkml.kernel.org/r/20170306103327.2766-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Michal Hocko 752ade68cb treewide: use kv[mz]alloc* rather than opencoded variants
There are many code paths opencoding kvmalloc.  Let's use the helper
instead.  The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator.  E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation.  This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously.  There is no guarantee something like that happens
though.

This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.

Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Masanari Iida f4b7ac68f4 drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
Link: http://lkml.kernel.org/r/20170226060230.11555-1-standby24x7@gmail.com
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 17:01:10 -08:00
Ingo Molnar b2d0910310 sched/headers: Prepare to use <linux/rcuupdate.h> instead of <linux/rculist.h> in <linux/sched.h>
We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the smaller rcupdate.h header instead.

But first update code that relied on the implicit header inclusion.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:38 +01:00
Ingo Molnar 68db0cf106 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:36 +01:00
Ingo Molnar e601757102 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/clock.h>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.

Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:27 +01:00
Jan Kara dc3b17cc8b block: Use pointer to backing_dev_info from request_queue
We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:20:48 -07:00
Christoph Hellwig f73f44eb00 block: add a op_is_flush helper
This centralizes the checks for bios that needs to be go into the flush
state machine.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 09:01:45 -07:00
Eric Wheeler b8c0d911ac bcache: partition support: add 16 minors per bcacheN device
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Tested-by: Wido den Hollander <wido@widodh.nl>
2016-12-17 13:02:00 -07:00
Kent Overstreet be628be095 bcache: Make gc wakeup sane, remove set_task_state()
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
2016-12-17 13:01:55 -07:00
Ming Lei 4113b88a65 bcache: debug: avoid accessing .bi_io_vec directly
Instead we use standard iterator way to do that.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-22 08:57:55 -07:00
Ming Lei 3a83f46775 block: bio: pass bvec table to bio_init()
Some drivers often use external bvec table, so introduce
this helper for this case. It is always safe to access the
bio->bi_io_vec in this way for this case.

After converting to this usage, it will becomes a bit easier
to evaluate the remaining direct access to bio->bi_io_vec,
so it can help to prepare for the following multipage bvec
support.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Fixed up the new O_DIRECT cases.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-22 08:57:21 -07:00
Christoph Hellwig 70fd76140a block,fs: use REQ_* flags directly
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly.  Where applicable this also drops usage of the
bio_set_op_attrs wrapper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Christoph Hellwig 83b5df67c5 bcache: use op_is_sync to check for synchronous requests
(and remove one layer of masking for the op_is_write call next to it).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Guoqing Jiang 491221f88d block: export bio_free_pages to other modules
bio_free_pages is introduced in commit 1dfa0f68c0
("block: add a helper to free bio bounce buffer pages"),
we can reuse the func in other modules after it was
imported.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 07:48:03 -06:00
Eric Wheeler 90706094d5 bcache: pr_err: more meaningful error message when nr_stripes is invalid
The original error was thought to be corruption, but was actually caused by:
	make-bcache --data-offset N
where N was in bytes and should have been in sectors.  While userspace
tools should be updated to check --data-offset beyond end of volume,
hopefully this will help others that might not have noticed the units.

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
2016-08-18 20:31:03 -07:00
Kent Overstreet acc9cf8c66 bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:

Allocator thread:
[  720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[  720.732361]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.732963]  [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[  720.733538]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.734137]  [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[  720.734715]  [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[  720.735311]  [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[  720.735884]  [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]

Registration thread:
[  720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[  720.715226]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.715805]  [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[  720.716409]  [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[  720.717008]  [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[  720.717586]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.718191]  [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[  720.718766]  [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[  720.719369]  [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[  720.719968]  [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[  720.720553]  [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[  720.721153]  [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[  720.721730]  [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[  720.722327]  [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[  720.722904]  [<ffffffff81225177>] __vfs_write+0x37/0x110
[  720.723503]  [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[  720.724100]  [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[  720.724675]  [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[  720.725275]  [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[  720.725849]  [<ffffffff81226755>] SyS_write+0x55/0xd0
[  720.726451]  [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[  720.727045]  [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71

The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
2016-08-18 20:29:49 -07:00
Eric Wheeler d9dc1702b2 bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
register_cache() is supposed to return an error string on error so that
register_bcache() will will blkdev_put and cleanup other user counters,
but it does not set 'char *err' when cache_alloc() fails (eg, due to
memory pressure) and thus register_bcache() performs no cleanup.

register_bcache() <----------\  <- no jump to err_close, no blkdev_put()
   |                         |
   +->register_cache()       |  <- fails to set char *err
         |                   |
         +->cache_alloc() ---/  <- returns error

This patch sets `char *err` for this failure case so that register_cache()
will cause register_bcache() to correctly jump to err_close and do
cleanup.  This was tested under OOM conditions that triggered the bug.

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
2016-08-18 20:28:23 -07:00
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Christoph Hellwig ed996a52c8 block: simplify and cleanup bvec pool handling
Instead of a flag and an index just make sure an index of 0 means
no need to free the bvec array.  Also move the constants related
to the bvec pools together and use a consistent naming scheme for
them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:37:02 -06:00
Yijing Wang 89b920e003 bcache: Remove redundant block_size assignment
We have assigned sb->block_size before the switch,
so remove the redundant one.

Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Eric Wheeler <bcache@lists.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:50 -06:00
Yijing Wang 7abc70d700 bcache: update document info
There is no return in continue_at(), update the documentation.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:49 -06:00
Yijing Wang c50d4d5dd3 bcache: Remove redundant parameter for cache_alloc()
Cache_sb is not used in cache_alloc, and we have copied
sb info to cache->sb already, remove it.

Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:47 -06:00
Bhaktipriya Shridhar 81baf90af2 bcache: Remove deprecated create_workqueue
alloc_workqueue replaces deprecated create_workqueue().

Dedicated workqueues have been used since bcache_wq and moving_gc_wq
are workqueues for writes and are being used on a memory reclaim path.
WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure.
Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary here.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-11 20:03:04 -06:00
Mike Christie 28a8f0d317 block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie ad0d9e76a4 bcache: use bio op accessors
Separate the op from the rq_flag_bits and have bcache
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie c8d93247f1 bcache: use op_is_write instead of checking for REQ_WRITE
We currently set REQ_WRITE/WRITE for all non READ IOs
like discard, flush, writesame, etc. In the next patches where we
no longer set up the op as a bitmap, we will not be able to
detect a operation direction like writesame by testing if REQ_WRITE is
set.

This has bcache use the op_is_write helper which will do the right
thing.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie 4e49ea4a3d block/fs/drivers: remove rw argument from submit_bio
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.

Signed-off-by: Mike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Jiri Kosina 29e6c57cc7 bcache: bch_gc_thread() is not freezable
bch_gc_thread() doesn't mark itself freezable, so calling try_to_freeze()
in its context is just an expensive no-op.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-24 09:00:45 -06:00
Jiri Kosina 770b8ce400 bcache: bch_allocator_thread() is not freezable
bch_allocator_thread() is calling try_to_freeze(), but that's just an
expensive no-op given the fact that the thread is not marked freezable.

Bucket allocator has to be up and running to the very last stages of the
suspend, as the bcache I/O that's in flight (think of writing an
hibernation image to a swap device served by bcache).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-24 09:00:43 -06:00
Jiri Kosina 7c87df9c15 bcache: bch_writeback_thread() is not freezable
bch_writeback_thread() is calling try_to_freeze(), but that's just an
expensive no-op given the fact that the thread is not marked freezable.

I/O helper kthreads, exactly such as the bcache writeback thread, actually
shouldn't be freezable, because they are potentially necessary for
finalizing the image write-out.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-24 09:00:40 -06:00
Jens Axboe 84b4ff9ef2 bcache: switch to using blk_queue_write_cache()
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 16:00:39 -06:00
Eric Wheeler f8b11260a4 bcache: fix cache_set_flush() NULL pointer dereference on OOM
When bch_cache_set_alloc() fails to kzalloc the cache_set, the
asyncronous closure handling tries to dereference a cache_set that
hadn't yet been allocated inside of cache_set_flush() which is called
by __cache_set_unregister() during cleanup.  This appears to happen only
during an OOM condition on bcache_register.

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
2016-03-08 09:19:10 -07:00
Eric Wheeler 9b299728ed bcache: cleaned up error handling around register_cache()
Fix null pointer dereference by changing register_cache() to return an int
instead of being void.  This allows it to return -ENOMEM or -ENODEV and
enables upper layers to handle the OOM case without NULL pointer issues.

See this thread:
  http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521

Fixes this error:
  gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register

  bcache: register_cache() error opening sdh2: cannot allocate memory
  BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8
  IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache]
  PGD 120dff067 PUD 1119a3067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: veth ip6table_filter ip6_tables
  (...)
  CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3
  Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
  Workqueue: events cache_set_flush [bcache]
  task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000
  RIP: 0010:[<ffffffffc05a7e8d>]  [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache]

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Tested-by: Marc MERLIN <marc@merlins.org>
Cc: <stable@vger.kernel.org>
2016-03-08 09:19:08 -07:00
Eric Wheeler 07cc6ef8ed bcache: fix race of writeback thread starting before complete initialization
The bch_writeback_thread might BUG_ON in read_dirty() if
dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed
its related initialization.  This patch downs the dc->writeback_lock until
after initialization is complete, thus preventing bch_writeback_thread
from proceeding prematurely.

See this thread:
  http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Tested-by: Marc MERLIN <marc@merlins.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-08 09:17:30 -07:00
Linus Torvalds 641203549a Merge branch 'for-4.5/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 4.5, with the exception of
  NVMe, which is in a separate branch and will be posted after this one.

  This pull request contains:

   - A set of bcache stability fixes, which have been acked by Kent.
     These have been used and tested for more than a year by the
     community, so it's about time that they got in.

   - A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
     and Markus Elfring, Oleg Drokin.

   - A set of fixes for xen blkback/front from the usual suspects, (Bob,
     Konrad) as well as community based fixes from Kiri, Julien, and
     Peng.

   - A 2038 time fix for sx8 from Shraddha, with a fix from me.

   - A small mtip32xx cleanup from Zhu Yanjun.

   - A null_blk division fix from Arnd"

* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
  null_blk: use sector_div instead of do_div
  mtip32xx: restrict variables visible in current code module
  xen/blkfront: Fix crash if backend doesn't follow the right states.
  xen/blkback: Fix two memory leaks.
  xen/blkback: make st_ statistics per ring
  xen/blkfront: Handle non-indirect grant with 64KB pages
  xen-blkfront: Introduce blkif_ring_get_request
  xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
  xen/blkback: Free resources if connect_ring failed.
  xen/blocks: Return -EXX instead of -1
  xen/blkback: make pool of persistent grants and free pages per-queue
  xen/blkback: get the number of hardware queues/rings from blkfront
  xen/blkback: pseudo support for multi hardware queues/rings
  xen/blkback: separate ring information out of struct xen_blkif
  xen/blkfront: correct setting for xen_blkif_max_ring_order
  xen/blkfront: make persistent grants pool per-queue
  xen/blkfront: Remove duplicate setting of ->xbdev.
  xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
  xen/blkfront: negotiate number of queues/rings to be used with backend
  xen/blkfront: split per device io_lock
  ...
2016-01-21 18:19:38 -08:00
Al Viro 93bbf5831d md: more open-coded offset_in_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:29:12 -05:00
Kent Overstreet 627ccd20b4 bcache: Change refill_dirty() to always scan entire disk if necessary
Previously, it would only scan the entire disk if it was starting from
the very start of the disk - i.e. if the previous scan got to the end.

This was broken by refill_full_stripes(), which updates last_scanned so
that refill_dirty was never triggering the searched_from_start path.

But if we change refill_dirty() to always scan the entire disk if
necessary, regardless of what last_scanned was, the code gets cleaner
and we fix that bug too.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:16 -07:00
Stefan Bader 8d16ce540c bcache: prevent crash on changing writeback_running
Added a safeguard in the shutdown case. At least while not being
attached it is also possible to trigger a kernel bug by writing into
writeback_running. This change  adds the same check before trying to
wake up the thread for that case.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:14 -07:00
Gabriel de Perthuis d7076f2162 bcache: allows use of register in udev to avoid "device_busy" error.
Allows to use register, not register_quiet in udev to avoid "device_busy" error.
The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis
<g2p.code@gmail.com> does not unlock the mutex and hangs the kernel.

See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion.

Cc: Denis Bychkov <manover@gmail.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Gabriel de Perthuis <g2p.code@gmail.com>
Cc: stable@vger.kernel.org

Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:13 -07:00
Zheng Liu 2ecf0cdb2b bcache: unregister reboot notifier if bcache fails to unregister device
In bcache_init() function it forgot to unregister reboot notifier if
bcache fails to unregister a block device.  This commit fixes this.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Joshua Schmid <jschmid@suse.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:11 -07:00
Al Viro 4d4d8573a8 bcache: fix a leak in bch_cached_dev_run()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Joshua Schmid <jschmid@suse.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:10 -07:00
Zheng Liu fecaee6f20 bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device
This bug can be reproduced by the following script:

  #!/bin/bash

  bcache_sysfs="/sys/fs/bcache"

  function clear_cache()
  {
  	if [ ! -e $bcache_sysfs ]; then
  		echo "no bcache sysfs"
  		exit
  	fi

  	cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}')
  	sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach"
  	sleep 5
  	sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach"
  }

  for ((i=0;i<10;i++)); do
  	clear_cache
  done

The warning messages look like below:
[  275.948611] ------------[ cut here ]------------
[  275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P        W
---------------   )
[  275.979253] Hardware name: Tecal RH2285
[  275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache'
[  276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler
bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801
i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas
pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan]
[  276.072643] Pid: 2765, comm: sh Tainted: P        W  ---------------    2.6.32 #1
[  276.089315] Call Trace:
[  276.105801]  [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0
[  276.122650]  [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50
[  276.139361]  [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0
[  276.156012]  [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170
[  276.172682]  [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20
[  276.189282]  [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache]
[  276.205993]  [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache]
[  276.222794]  [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache]
[  276.239680]  [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110
[  276.256594]  [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170
[  276.273364]  [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0
[  276.290133]  [<ffffffff811890b1>] ? sys_write+0x51/0x90
[  276.306368]  [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b
[  276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]---
[  276.338241] ------------[ cut here ]------------
[  276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720
bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P        W  ---------------   )
[  276.386017] Hardware name: Tecal RH2285
[  276.401430] Couldn't create device <-> cache set symlinks
[  276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler
bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801
i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas
pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan]
[  276.465477] Pid: 2765, comm: sh Tainted: P        W  ---------------    2.6.32 #1
[  276.482169] Call Trace:
[  276.498610]  [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0
[  276.515405]  [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50
[  276.532059]  [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache]
[  276.548808]  [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache]
[  276.565569]  [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache]
[  276.582418]  [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110
[  276.599341]  [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170
[  276.616142]  [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0
[  276.632607]  [<ffffffff811890b1>] ? sys_write+0x51/0x90
[  276.648671]  [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b
[  276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]---

We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach()
function when we attach a backing device first time.  After detaching this
backing device, this flag will be true and sysfs_remove_link() isn't called in
bcache_device_unlink().  Then when we attach this backing device again,
sysfs_create_link() will return EEXIST error in bcache_device_link().

So the fix is trival and we clear this flag in bcache_device_link().

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Joshua Schmid <jschmid@suse.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:08 -07:00
Kent Overstreet c5f1e5adf9 bcache: Add a cond_resched() call to gc
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:06 -07:00
Zheng Liu 2ef9ccbfcb bcache: fix a livelock when we cause a huge number of cache misses
Subject :	[PATCH v2] bcache: fix a livelock in btree lock
Date :	Wed, 25 Feb 2015 20:32:09 +0800 (02/25/2015 04:32:09 AM)

This commit tries to fix a livelock in bcache.  This livelock might
happen when we causes a huge number of cache misses simultaneously.

When we get a cache miss, bcache will execute the following path.

->cached_dev_make_request()
  ->cached_dev_read()
    ->cached_lookup()
      ->bch->btree_map_keys()
        ->btree_root()  <------------------------
          ->bch_btree_map_keys_recurse()        |
            ->cache_lookup_fn()                 |
              ->cached_dev_cache_miss()         |
                ->bch_btree_insert_check_key() -|
                  [If btree->seq is not equal to seq + 1, we should return
                   EINTR and traverse btree again.]

In bch_btree_insert_check_key() function we first need to check upgrade
flag (op->lock == -1), and when this flag is true we need to release
read btree->lock and try to take write btree->lock.  During taking and
releasing this write lock, btree->seq will be monotone increased in
order to prevent other threads modify this in cache miss (see btree.h:74).
But if there are some cache misses caused by some requested, we could
meet a livelock because btree->seq is always changed by others.  Thus no
one can make progress.

This commit will try to take write btree->lock if it encounters a race
when we traverse btree.  Although it sacrifice the scalability but we
can ensure that only one can modify the btree.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Joshua Schmid <jschmid@suse.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Joshua Schmid <jschmid@suse.com>
Cc: Zhu Yanhai <zhu.yanhai@gmail.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-30 20:23:05 -07:00
Linus Torvalds 3419b45039 Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block
Pull block IO poll support from Jens Axboe:
 "Various groups have been doing experimentation around IO polling for
  (really) fast devices.  The code has been reviewed and has been
  sitting on the side for a few releases, but this is now good enough
  for coordinated benchmarking and further experimentation.

  Currently O_DIRECT sync read/write are supported.  A framework is in
  the works that allows scalable stats tracking so we can auto-tune
  this.  And we'll add libaio support as well soon.  Fow now, it's an
  opt-in feature for test purposes"

* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
  direct-io: be sure to assign dio->bio_bdev for both paths
  directio: add block polling support
  NVMe: add blk polling support
  block: add block polling support
  blk-mq: return tag/queue combo in the make_request_fn handlers
  block: change ->make_request_fn() and users to return a queue cookie
2015-11-10 17:23:49 -08:00
Linus Torvalds 75021d2859 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "Trivial stuff from trivial tree that can be trivially summed up as:

   - treewide drop of spurious unlikely() before IS_ERR() from Viresh
     Kumar

   - cosmetic fixes (that don't really affect basic functionality of the
     driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek

   - various comment / printk fixes and updates all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  bcache: Really show state of work pending bit
  hwmon: applesmc: fix comment typos
  Kconfig: remove comment about scsi_wait_scan module
  class_find_device: fix reference to argument "match"
  debugfs: document that debugfs_remove*() accepts NULL and error values
  net: Drop unlikely before IS_ERR(_OR_NULL)
  mm: Drop unlikely before IS_ERR(_OR_NULL)
  fs: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: net: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: misc: Drop unlikely before IS_ERR(_OR_NULL)
  UBI: Update comments to reflect UBI_METAONLY flag
  pktcdvd: drop null test before destroy functions
2015-11-07 13:05:44 -08:00
Jens Axboe dece16353e block: change ->make_request_fn() and users to return a queue cookie
No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:46 -07:00
Petr Mladek 8d090f4731 bcache: Really show state of work pending bit
WORK_STRUCT_PENDING is a mask for testing the pending bit.
test_bit() expects the number of the bit and we need to
use WORK_STRUCT_PENDING_BIT there.

Also work_data_bits() is defined in workqueues.h now.

I have noticed this just by chance when looking how
WORK_STRUCT_PENDING_BIT is used. The change is compile
tested.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-06 15:06:05 +01:00
Kent Overstreet 749b61dab3 bcache: remove driver private bio splitting code
The bcache driver has always accepted arbitrarily large bios and split
them internally.  Now that every driver must accept arbitrarily large
bios this code isn't nessecary anymore.

Cc: linux-bcache@vger.kernel.org
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: add more description in commit message]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:31:40 -06:00
Christoph Hellwig 4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
Jens Axboe 2bb4cd5cc4 block: have drivers use blk_queue_max_discard_sectors()
Some drivers use it now, others just set the limits field manually.
But in preparation for splitting this into a hard and soft limit,
ensure that they all call the proper function for setting the hw
limit for discards.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Jens Axboe 77b5a08427 bcache: don't embed 'return' statements in closure macros
This is horribly confusing, it breaks the flow of the code without
it being apparent in the caller.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
2015-07-11 09:57:32 -06:00
Joe Perches d1aa1ab33d MAINTAINERS: BCACHE: Kent Overstreet has changed email address
Kent's email address in MAINTAINERS seems to be invalid.
This was his last sign-off address, so use that if appropriate.

Fix the S: status entry while there.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:45:01 -07:00
Pekka Enberg 958b43384e bcache: use kvfree() in various places
Use kvfree() instead of open-coding it.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:45:00 -07:00
Tejun Heo 66114cad64 writeback: separate out include/linux/backing-dev-defs.h
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:34 -06:00
Mike Snitzer 326e1dbb57 block: remove management of bi_remaining when restoring original bi_end_io
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
 1) saving a bio's original bi_end_io
 2) wiring up an intermediate bi_end_io
 3) restoring the original bi_end_io from intermediate bi_end_io
 4) calling bio_endio() to execute the restored original bi_end_io

The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called.  For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN).  As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0.  When bio_inc_remaining() occurred during step
3 it brought it to a value of 2.  When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).

Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining.  For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.

Also, the bio_inc_remaining() interface has been moved local to bio.c.

Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 08:58:55 -06:00
Jens Axboe dac56212e8 bio: skip atomic inc/dec of ->bi_cnt for most use cases
Struct bio has a reference count that controls when it can be freed.
Most uses cases is allocating the bio, which then returns with a
single reference to it, doing IO, and then dropping that single
reference. We can remove this atomic_dec_and_test() in the completion
path, if nobody else is holding a reference to the bio.

If someone does call bio_get() on the bio, then we flag the bio as
now having valid count and that we must properly honor the reference
count when it's being put.

Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05 13:32:49 -06:00
Gu Zheng aae4933da9 md/bcache: use generic io stats accounting functions to simplify io stat accounting
Use generic io stats accounting help functions (generic_{start,end}_io_acct)
to simplify io stat accounting.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Kent Overstreet <kmo@datera.io>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-24 08:05:12 -07:00
Mike Snitzer b277da0a8a block: disable entropy contributions for nonrot devices
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set
QUEUE_FLAG_NONROT.

Historically, all block devices have automatically made entropy
contributions.  But as previously stated in commit e2e1a148 ("block: add
sysfs knob for turning off disk entropy contributions"):
    - On SSD disks, the completion times aren't as random as they
      are for rotational drives. So it's questionable whether they
      should contribute to the random pool in the first place.
    - Calling add_disk_randomness() has a lot of overhead.

There are more reliable sources for randomness than non-rotational block
devices.  From a security perspective it is better to err on the side of
caution than to allow entropy contributions from unreliable "random"
sources.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-04 10:55:32 -06:00
Kent Overstreet 0781c8748c bcache: Drop unneeded blk_sync_queue() calls
this is needed for the queue/block device we created (it's done by
blk_cleanup_queue() which we do call) - but calling it for the block devices we
only opened is pointless.

Change-Id: I53dfded14ed15b9581d10ca8399d5e1b3abbf9f2
2014-08-04 15:23:04 -07:00
Jianjian Huo 789d21dbd9 bcache: add mutex lock for bch_is_open
Since bch_is_open will iterate linked list bch_cache_sets and
uncached_devices, it needs bch_register_lock.

Signed-off-by: Jianjian Huo <samuel.huo@gmail.com>
2014-08-04 15:23:04 -07:00
Surbhi Palande 5b25abade2 bcache: Correct printing of btree_gc_max_duration_ms
time_stats::btree_gc_max_duration_mc is not bit shifted by 8

Fixes BUG #138

Change-Id: I44fc6e1d0579674016acc533f1a546b080e5371a
Signed-off-by: Surbhi Palande <sap@daterainc.com>
2014-08-04 15:23:04 -07:00
Slava Pestov 2452cc8906 bcache: try to set b->parent properly
bcache_flash_dev.ktest would reliably crash with 8k and 16k bucket size
before; now it passes.

Change-Id: Ib542232235e39298c3a7548fe52b645cabb823d1
2014-08-04 15:23:04 -07:00
Slava Pestov c9a78332b4 bcache: fix memory corruption in init error path
If register_cache_set() failed, we would touch ca->set after
it had already been freed. Also, fix an assertion to catch
this.

Change-Id: I748e5f5b223e2d9b2602075dec2f997cced2394d
2014-08-04 15:23:04 -07:00
Slava Pestov bf0c55c986 bcache: fix crash with incomplete cache set
Change-Id: I6abde52afe917633480caaf4e2518f42a816d886
2014-08-04 15:23:04 -07:00
Kent Overstreet d83353b319 bcache: Fix more early shutdown bugs
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:04 -07:00
Slava Pestov 400ffaa2ac bcache: fix use-after-free in btree_gc_coalesce()
If we goto out_nocoalesce after we free new_nodes[0], we end up freeing
new_nodes[0] again. This was generating a lockdep warning. The fix is
to set new_nodes[0] to NULL, since the out_nocoalesce path safely
ignores NULL entries in the new_nodes array.

This regression was introduced in 2d7f9531.

Change-Id: I76564d7257800583214376b4bacf236cda90c89c
2014-08-04 15:23:04 -07:00
Kent Overstreet 6b708de64a bcache: Fix an infinite loop in journal replay
When running with multiple cache devices, if one of the devices has a completely
empty journal but we'd already found some journal entries on a previosu device
we'd go into an infinite loop.

Change-Id: I1dcdc0d738192746de28f40e8b08825b0dea5e2b
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Slava Pestov 913dc33fb2 bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
'b' was NULL.

Change-Id: Icac0fd04afa2d23f213d96d51afd53374e6dd0c0
2014-08-04 15:23:03 -07:00
Slava Pestov 60ae81eee8 bcache: bcache_write tracepoint was crashing
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Slava Pestov 8e09480806 bcache: fix typo in bch_bkey_equal_header
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Kent Overstreet 501d52a90c bcache: Allocate bounce buffers with GFP_NOWAIT
There's no point in blocking on these allocations, since our fallback paths will
probably go faster than blocking.

Change-Id: I733ca202c25cb36bde02607a0a60552229a4241c
2014-08-04 15:23:03 -07:00
Kent Overstreet bcf090e004 bcache: Make sure to pass GFP_WAIT to mempool_alloc()
this was very wrong - mempool_alloc() only guarantees success with GFP_WAIT.
bcache uses GFP_NOWAIT in various other places where we have a fallback,
circuits must've gotten crossed when writing this code or something.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Slava Pestov 9e5c353510 bcache: fix uninterruptible sleep in writeback thread
There were two issues here:

- writeback thread did not start until the device first became dirty
- writeback thread used uninterruptible sleep once running

Without this patch I see kernel warnings printed and a load average of
1.52 after booting my test VM. With this patch the warnings are gone and
the load average is near 0.00 as expected.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Slava Pestov c5aa4a3157 bcache: wait for buckets when allocating new btree root
Tested:
- sometimes bcache_tier test would hang on startup with a failure
  to allocate the btree root -- no longer seeing this

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Slava Pestov a664d0f05a bcache: fix crash on shutdown in passthrough mode
We never started the writeback thread in this case, so don't stop it.
2014-08-04 15:23:03 -07:00
Slava Pestov e5112201c1 bcache: fix lockdep warnings on shutdown 2014-08-04 15:23:03 -07:00
Slava Pestov 8b326d3a2a bcache allocator: send discards with correct size 2014-08-04 15:23:03 -07:00
Surbhi Palande dbd810ab67 bcache: Fix to remove the rcu_sched stalls.
while loop was executing infinitely.
This fix ends the while loop gracefully.

Signed-off-by: Surbhi Palande <sap@daterainc.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:02 -07:00
Kent Overstreet 9aa61a992a bcache: Fix a journal replay bug
journal replay wansn't validating pointers with bch_extent_invalid() before
derefing, fixed

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:02 -07:00
Kent Overstreet 5b1016e62f bcache: Fix a bug when detaching
After detaching a backing device from a cache set, a bit wasn't getting
reset meaning the second detach wouldn't work correctly.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:02 -07:00
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
John Sheu cb85114956 bcache: remove nested function usage
Uninlined nested functions can cause crashes when using ftrace, as they don't
follow the normal calling convention and confuse the ftrace function graph
tracer as it examines the stack.

Also, nested functions are supported as a gcc extension, but may fail on other
compilers (e.g. llvm).

Signed-off-by: John Sheu <john.sheu@gmail.com>
2014-03-18 12:39:28 -07:00
Kent Overstreet 3a2fd9d509 bcache: Kill bucket->gc_gen
gc_gen was a temporary used to recalculate last_gc, but since we only need
bucket->last_gc when gc isn't running (gc_mark_valid = 1), we can just update
last_gc directly.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:24:54 -07:00
Kent Overstreet 2531d9ee61 bcache: Kill unused freelist
This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:36 -07:00
Kent Overstreet 0a63b66db5 bcache: Rework btree cache reserve handling
This changes the bucket allocation reserves to use _real_ reserves - separate
freelists - instead of watermarks, which if nothing else makes the current code
saner to reason about and is going to be important in the future when we add
support for multiple btrees.

It also adds btree_check_reserve(), which checks (and locks) the reserves for
both bucket allocation and memory allocation for btree nodes; the old code just
kinda sorta assumed that since (e.g. for btree node splits) it had the root
locked and that meant no other threads could try to make use of the same
reserve; this technically should have been ok for memory allocation (we should
always have a reserve for memory allocation (the btree node cache is used as a
reserve and we preallocate it)), but multiple btrees will mean that locking the
root won't be sufficient anymore, and for the bucket allocation reserve it was
technically possible for the old code to deadlock.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:35 -07:00
Kent Overstreet 56b30770b2 bcache: Kill btree_io_wq
With the locking rework in the last patch, this shouldn't be needed anymore -
btree_node_write_work() only takes b->write_lock which is never held for very
long.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:35 -07:00
Kent Overstreet 2a285686c1 bcache: btree locking rework
Add a new lock, b->write_lock, which is required to actually modify - or write -
a btree node; this lock is only held for short durations.

This means we can write out a btree node without taking b->lock, which _is_ held
for long durations - solving a deadlock when btree_flush_write() (from the
journalling code) is called with a btree node locked.

Right now just occurs in bch_btree_set_root(), but with an upcoming journalling
rework is going to happen a lot more.

This also turns b->lock is now more of a read/intent lock instead of a
read/write lock - but not completely, since it still blocks readers. May turn it
into a real intent lock at some point in the future.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:35 -07:00
Kent Overstreet 05335cff9f bcache: Fix a race when freeing btree nodes
This isn't a bulletproof fix; btree_node_free() -> bch_bucket_free() puts the
bucket on the unused freelist, where it can be reused right away without any
ordering requirements. It would be better to wait on at least a journal write to
go down before reusing the bucket. bch_btree_set_root() does this, and inserting
into non leaf nodes is completely synchronous so we should be ok, but future
patches are just going to get rid of the unused freelist - it was needed in the
past for various reasons but shouldn't be anymore.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:34 -07:00
Kent Overstreet 4fe6a81670 bcache: Add a real GC_MARK_RECLAIMABLE
This means the garbage collection code can better check for data and metadata
pointers to the same buckets.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:36 -07:00
Kent Overstreet c13f3af924 bcache: Add bch_keylist_init_single()
This will potentially save us an allocation when we've got inode/dirent bkeys
that don't fit in the keylist's inline keys.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:36 -07:00
Kent Overstreet 1575402052 bcache: Improve priority_stats
Break down data into clean data/dirty data/metadata.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:35 -07:00
Kent Overstreet 7159b1ad3d bcache: Better alloc tracepoints
Change the invalidate tracepoint to indicate how much data we're invalidating,
and change the alloc tracepoints to indicate what offset they're for.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:35 -07:00
Kent Overstreet 3f5e0a34da bcache: Kill dead cgroup code
This hasn't been used or even enabled in ages.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:35 -07:00
Nicholas Swenson 3f6ef38110 bcache: stop moving_gc marking buckets that can't be moved.
Signed-off-by: Nicholas Swenson <nks@daterainc.com>
2014-03-18 12:22:34 -07:00
Kent Overstreet 10d9dcf6ee bcache: Fix moving_pred()
Avoid a potential null pointer deref (e.g. from check keys for cache misses)

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:34 -07:00
Nicholas Swenson da415a096f bcache: Fix moving_gc deadlocking with a foreground write
Deadlock happened because a foreground write slept, waiting for a bucket
to be allocated. Normally the gc would mark buckets available for invalidation.
But the moving_gc was stuck waiting for outstanding writes to complete.
These writes used the bcache_wq, the same queue foreground writes used.

This fix gives moving_gc its own work queue, so it was still finish moving
even if foreground writes are stuck waiting for allocation. It also makes
work queue a parameter to the data_insert path, so moving_gc can use its
workqueue for writes.

Signed-off-by: Nicholas Swenson <nks@daterainc.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:33 -07:00
Kent Overstreet 90db6919f5 bcache: Fix discard granularity
blk_stack_limits() doesn't like a discard granularity of 0.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:33 -07:00
Kent Overstreet 487dded86e bcache: Fix another bug recovering from unclean shutdown
The on disk bucket gens are allowed to be out of date, when we reuse buckets
that didn't have any live data in them. To deal with this, the initial gc has to
update the bucket gen when we find a pointer gen newer than the bucket's gen.

Unfortunately we weren't doing this for pointers in the journal that we're about
to replay.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:33 -07:00
Kent Overstreet 0bd143fd80 bcache: Fix a bug recovering from unclean shutdown
The code to fixup incorrect bucket prios incorrectly did not skip btree node
freeing keys

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:32 -07:00
Kent Overstreet 27201cfdaa bcache: Fix a journalling reclaim after recovery bug
On recovery we weren't correctly keeping track of what journal buckets had open
journal entries, thus it was possible for them to be overwritten until we'd
written all new journal entries.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:21:48 -07:00
Kent Overstreet 65ddf45a31 bcache: Fix a null ptr deref in journal replay
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-17 19:01:03 -07:00
Kent Overstreet 4fa03402cd bcache: Fix a lockdep splat in an error path
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-17 18:59:09 -07:00
Kent Overstreet dabb443340 bcache: Fix a shutdown bug
Shutdown wasn't cancelling/waiting on journal_write_work()

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-02-25 18:42:49 -08:00
Kent Overstreet 1b4eaf3d38 bcache: Fix flash_dev_cache_miss() for real this time
The code was using sectors to count the number of sectors it was zeroing... but
then it passed it to bio_advance()... after it had been set to 0. Amusing...

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-02-25 18:41:11 -08:00
Kent Overstreet 85cbe1f88c bcache: Fix another compiler warning on m68k
Use a bigger hammer this time

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org>
2014-02-18 08:55:05 -08:00
Jens Axboe 96d2e8b5e2 Merge branch 'bcache-for-3.14' of git://evilpiepirate.org/~kent/linux-bcache into for-linus 2014-01-30 12:57:55 -07:00
Linus Torvalds 53d8ab29f8 Merge branch 'for-3.14/drivers' of git://git.kernel.dk/linux-block
Pull block IO driver changes from Jens Axboe:

 - bcache update from Kent Overstreet.

 - two bcache fixes from Nicholas Swenson.

 - cciss pci init error fix from Andrew.

 - underflow fix in the parallel IDE pg_write code from Dan Carpenter.
   I'm sure the 1 (or 0) users of that are now happy.

 - two PCI related fixes for sx8 from Jingoo Han.

 - floppy init fix for first block read from Jiri Kosina.

 - pktcdvd error return miss fix from Julia Lawall.

 - removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
   Michael Opdenacker.

 - comment typo fix for the loop driver from Olaf Hering.

 - potential oops fix for null_blk from Raghavendra K T.

 - two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
   an OOM problem and a problem with handling security locked conditions

* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
  mg_disk: Spelling s/finised/finished/
  null_blk: Null pointer deference problem in alloc_page_buffers
  mtip32xx: Correctly handle security locked condition
  mtip32xx: Make SGL container per-command to eliminate high order dma allocation
  drivers/block/loop.c: fix comment typo in loop_config_discard
  drivers/block/cciss.c:cciss_init_one(): use proper errnos
  drivers/block/paride/pg.c: underflow bug in pg_write()
  drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
  drivers/block/sx8.c: use module_pci_driver()
  floppy: bail out in open() if drive is not responding to block0 read
  bcache: Fix auxiliary search trees for key size > cacheline size
  bcache: Don't return -EINTR when insert finished
  bcache: Improve bucket_prio() calculation
  bcache: Add bch_bkey_equal_header()
  bcache: update bch_bkey_try_merge
  bcache: Move insert_fixup() to btree_keys_ops
  bcache: Convert sorting to btree_keys
  bcache: Convert debug code to btree_keys
  bcache: Convert btree_iter to struct btree_keys
  bcache: Refactor bset_tree sysfs stats
  ...
2014-01-30 11:40:10 -08:00
Linus Torvalds f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Nicholas Swenson e3b4825b85 bcache: bugfix - gc thread now gets woken when cache is full
Signed-off-by: Nicholas Swenson <nks@daterainc.com>
2014-01-29 13:06:42 -08:00
Kent Overstreet 3572324af0 bcache: Minor fixes from kbuild robot
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-29 13:06:41 -08:00
Darrick J. Wong 9471744767 bcache: fix BUG_ON due to integer overflow with GC_SECTORS_USED
The BUG_ON at the end of __bch_btree_mark_key can be triggered due to
an integer overflow error:

BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, 13);
...
SET_GC_SECTORS_USED(g, min_t(unsigned,
	     GC_SECTORS_USED(g) + KEY_SIZE(k),
	     (1 << 14) - 1));
BUG_ON(!GC_SECTORS_USED(g));

In bcache.h, the SECTORS_USED bitfield is defined to be 13 bits wide.
While the SET_ code tries to ensure that the field doesn't overflow by
clamping it to (1<<14)-1 == 16383, this is incorrect because 16383
requires 14 bits.  Therefore, if GC_SECTORS_USED() + KEY_SIZE() =
8192, the SET_ statement tries to store 8192 into a 13-bit field.  In
a 13-bit field, 8192 becomes zero, thus triggering the BUG_ON.

Therefore, create a field width constant and a max value constant, and
use those to create the bitfield and check the inputs to
SET_GC_SECTORS_USED.  Arguably the BITMASK() template ought to have
BUG_ON checks for too-large values, but that's a separate patch.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2014-01-29 13:06:15 -08:00
Linus Torvalds f075e0f699 Merge branch 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "The bulk of changes are cleanups and preparations for the upcoming
  kernfs conversion.

   - cgroup_event mechanism which is and will be used only by memcg is
     moved to memcg.

   - pidlist handling is updated so that it can be served by seq_file.

     Also, the list is not sorted if sane_behavior.  cgroup
     documentation explicitly states that the file is not sorted but it
     has been for quite some time.

   - All cgroup file handling now happens on top of seq_file.  This is
     to prepare for kernfs conversion.  In addition, all operations are
     restructured so that they map 1-1 to kernfs operations.

   - Other cleanups and low-pri fixes"

* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits)
  cgroup: trivial style updates
  cgroup: remove stray references to css_id
  doc: cgroups: Fix typo in doc/cgroups
  cgroup: fix fail path in cgroup_load_subsys()
  cgroup: fix missing unlock on error in cgroup_load_subsys()
  cgroup: remove for_each_root_subsys()
  cgroup: implement for_each_css()
  cgroup: factor out cgroup_subsys_state creation into create_css()
  cgroup: combine css handling loops in cgroup_create()
  cgroup: reorder operations in cgroup_create()
  cgroup: make for_each_subsys() useable under cgroup_root_mutex
  cgroup: css iterations and css_from_dir() are safe under cgroup_mutex
  cgroup: unify pidlist and other file handling
  cgroup: replace cftype->read_seq_string() with cftype->seq_show()
  cgroup: attach cgroup_open_file to all cgroup files
  cgroup: generalize cgroup_pidlist_open_file
  cgroup: unify read path so that seq_file is always used
  cgroup: unify cgroup_write_X64() and cgroup_write_string()
  cgroup: remove cftype->read(), ->read_map() and ->write()
  hugetlb_cgroup: convert away from cftype->read()
  ...
2014-01-21 17:51:34 -08:00
Hugh Dickins b3ff8a2f95 cgroup: remove stray references to css_id
Trivial: remove the few stray references to css_id, which itself
was removed in v3.13's 2ff2a7d03b "cgroup: kill css_id".

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-13 10:48:18 -05:00
Kent Overstreet 9dd6358a21 bcache: Fix auxiliary search trees for key size > cacheline size
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:15 -08:00
Kent Overstreet 3b3e9e50dd bcache: Don't return -EINTR when insert finished
We need to return -EINTR after a split because we invalidated iterators
(and freed the btree node) - but if we were finished inserting, we don't
want to redo the traversal.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:14 -08:00
Kent Overstreet e0a985a4b1 bcache: Improve bucket_prio() calculation
When deciding what order to reuse buckets we take into account both the bucket's
priority (which indicates lru order) and also the amount of live data in that
bucket. The way they were scaled together wasn't as correct as it could be...
this patch improves and documents it.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:14 -08:00
Nicholas Swenson 3bdad1e40d bcache: Add bch_bkey_equal_header()
Checks if two keys have equivalent header fields.
(good enough for replacement or merging)

Used in bch_bkey_try_merge, and replacing a key
in the btree.

Signed-off-by: Nicholas Swenson <nks@daterainc.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:14 -08:00
Nicholas Swenson 0f49cf3d83 bcache: update bch_bkey_try_merge
Added generic header checks to bch_bkey_try_merge,
which then calls the bkey specific function

Removed extraneous checks from bch_extent_merge

Signed-off-by: Nicholas Swenson <nks@daterainc.com>
2014-01-08 13:05:14 -08:00
Kent Overstreet 829a60b905 bcache: Move insert_fixup() to btree_keys_ops
Now handling overlapping extents/keys is a method that's specific to what the
btree node contains.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:14 -08:00
Kent Overstreet 89ebb4a28b bcache: Convert sorting to btree_keys
More work to disentangle various code from struct btree

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet dc9d98d621 bcache: Convert debug code to btree_keys
More work to disentangle various code from struct btree

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet c052dd9a26 bcache: Convert btree_iter to struct btree_keys
More work to disentangle bset.c from struct btree

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet f67342dd34 bcache: Refactor bset_tree sysfs stats
We're in the process of turning bset.c into library code, so none of the code in
that file should know about struct cache_set or struct btree - so, move the
btree traversal part of the stats code to sysfs.c.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet 59158fde42 bcache: Add bch_btree_keys_u64s_remaining()
Helper function to explicitly check how much space is free in a btree node

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet a85e968e66 bcache: Add struct btree_keys
Soon, bset.c won't need to depend on struct btree.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet 65d45231b5 bcache: Abstract out stuff needed for sorting
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:12 -08:00
Kent Overstreet ee811287c9 bcache: Rename/shuffle various code around
More work to disentangle bset.c from the rest of the code:

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:12 -08:00
Kent Overstreet 67539e8528 bcache: Add struct bset_sort_state
More disentangling bset.c from the rest of the bcache code - soon, the
sorting routines won't have any dependencies on any outside structs.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:12 -08:00
Kent Overstreet 911c961009 bcache: Split out sort_extent_cmp()
Only use extent comparison for comparing extents, so we're not using
START_KEY() on other key types (i.e. btree pointers)

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:12 -08:00
Kent Overstreet fafff81cea bcache: Bkey indexing renaming
More refactoring:

node() -> bset_bkey_idx()
end() -> bset_bkey_last()

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:12 -08:00
Kent Overstreet 085d2a3dd4 bcache: Make bch_keylist_realloc() take u64s, not nptrs
Getting away from KEY_PTRS and moving toward KEY_U64s - and getting rid of magic
2s

Also - split out the part that checks against journal entry size so as to avoid
a dependancy on struct cache_set in bset.c

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:11 -08:00
Kent Overstreet 9a02b7eeeb bcache: Remove/fix some header dependencies
In the process of disentagling/libraryizing bset.c from the rest of the
bcache code.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:11 -08:00
Kent Overstreet 0a45114534 bcache: Use a mempool for mergesort temporary space
It was a single element mempool before, it's slightly cleaner to just use a real
mempool.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:11 -08:00
Kent Overstreet 78b77bf8b2 bcache: Btree verify code improvements
Used this fixed code to find and fix the bug fixed by
a4d885097b0ac0cd1337f171f2d4b83e946094d4.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:10 -08:00
Kent Overstreet 88b9f8c426 bcache: kill index()
That was a terrible name for a macro, add some better helpers to replace it.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:10 -08:00
Kent Overstreet 5c41c8a713 bcache: Trivial error handling fix
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:10 -08:00
Kent Overstreet c78afc6261 bcache/md: Use raid stripe size
Now that we've got code for raid5/6 stripe awareness, bcache just needs
to know about the stripes and when writing partial stripes is expensive
- we probably don't want to enable this optimization for raid1 or 10,
even though they have stripes. So add a flag to queue_limits.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00
Kent Overstreet 5f5837d2d6 bcache: Do bkey_put() in btree_split() error path
This error path shouldn't have been hit in practice.. and we've got reworked
reserve code coming soon so that it shouldn't _ever_ be bit... but if we've got
code for this error path it should be correct.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00
Kent Overstreet 78365411b3 bcache: Rework allocator reserves
We need a reserve for allocating buckets for new btree nodes - and now that
we've got multiple btrees, it really needs to be per btree.

This reworks the reserves so we've got separate freelists for each reserve
instead of watermarks, which seems to make things a bit cleaner, and it adds
some code so that btree_split() can make sure the reserve is available before it
starts.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00
Kent Overstreet 1dd13c8d3c bcache: kill closure locking code
Also flesh out the documentation a bit

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:08 -08:00
Kent Overstreet cb7a583e6a bcache: kill closure locking usage
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:08 -08:00