Pull input updates from Dmitry Torokhov:
"A few new drivers:
- driver for Azoteq IQS550/572/525 touch controllers
- driver for Microchip AT42QT1050 keys
- driver for GPIO controllable vibrators
- support for GT5663 in Goodix driver
... along with miscellaneous driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: libps2 - mark expected switch fall-through
Input: qt1050 - add Microchip AT42QT1050 support
Input: add support for Azoteq IQS550/572/525
Input: add a driver for GPIO controllable vibrators
Input: synaptics-rmi4 - fix enum_fmt
Input: synaptics-rmi4 - fill initial format
HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
Input: add KEY_KBD_LAYOUT_NEXT
Input: hyperv-keyboard - add module description
Input: olpc_apsp - depend on ARCH_MMP
Input: sun4i-a10-lradc-keys - add support for A83T
Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
Input: lpc32xx-key - add clocks property and fix DT binding example
Input: i8042 - signal wakeup from atkbd/psmouse
Input: goodix - add GT5663 CTP support
Input: goodix - add regulators suppot
Input: evdev - use struct_size() in kzalloc() and vzalloc()
Input: edt-ft5x06 - convert to use SPDX identifier
Input: edt-ft5x06 - enable ACPI enumeration
Pull HID updates from Jiri Kosina:
- support for U2F Zero device, from Andrej Shadura
- logitech-dj has historically been treating devices behind
non-unifying receivers as generic devices, using the HID emulation in
the receiver. That had several shortcomings (special keys handling,
battery level monitoring, etc). The driver has been reworked to
enumarate (and directly communicate with) the devices behind the
receiver, to avoid the (too) generic HID implementation in the
receiver itself. All the work done by Benjamin Tissoires and Hans de
Goede.
- restructuring of intel-ish driver in order to allow for multiple
clients of the ISH implementation, from Srinivas Pandruvada
- several other smaller fixes and assorted device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits)
HID: logitech-dj: fix spelling in printk
HID: input: fix assignment of .value
HID: input: make sure the wheel high resolution multiplier is set
HID: logitech-dj: add usbhid dependency in Kconfig
HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports
HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports
HID: logitech-hidpp: add support for HID++ 1.0 wheel reports
HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic
HID: logitech-hidpp: add input_device ptr to struct hidpp_device
HID: logitech-hidpp: do not hardcode very long report length
HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers
HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
HID: logitech-hidpp: remove unused origin_is_hid_core function parameter
HID: logitech-hidpp: remove double assignment from __hidpp_send_report
HID: logitech-hidpp: do not make failure to get the name fatal
HID: logitech-hidpp: ignore very-short or empty names
HID: logitech-hidpp: make .probe usbhid capable
HID: logitech-hidpp: allow non HID++ devices to be handled by this module
HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver
HID: logitech-dj: make appending of the HID++ descriptors conditional
...
HUTRR56 defined a new usage code on consumer page to cycle through
set of keyboard layouts, let's add this mapping.
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The value field is actually an array of .maxfield. We should assign the
correct number to the correct usage.
Not that we never encounter a device that requires this ATM, but better
have the proper code path.
Fixes: 2dc702c991 ("HID: input: use the Resolution Multiplier for
high-resolution scrolling")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Some old mice have a tendency to not accept the high resolution multiplier.
They reply with a -EPIPE which was previously ignored.
Force the call to resolution multiplier to be synchronous and actually
check for the answer. If this fails, consider the mouse like a normal one.
Fixes: 2dc702c991 ("HID: input: use the Resolution Multiplier for
high-resolution scrolling")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071
Reported-and-tested-by: James Feeney <james@nurealm.net>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Pull input updates from Dmitry Torokhov:
- several new key mappings for HID
- a host of new ACPI IDs used to identify Elan touchpads in Lenovo
laptops
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
HID: input: add mapping for "Toggle Display" key
HID: input: add mapping for "Full Screen" key
HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys
HID: input: add mapping for Expose/Overview key
HID: input: fix mapping of aspect ratio key
[media] doc-rst: switch to new names for Full Screen/Aspect keys
Input: document meanings of KEY_SCREEN and KEY_ZOOM
Input: elan_i2c - add hardware ID for multiple Lenovo laptops
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved
for switching between external and internal display, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to HUT 1.12 usage 0x232 from the consumer page is reserved for
switching application between full screen and windowed mode, so let's add
the mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page
correspond to Brightness Up/Down/Toggle keys, so let's add the mappings.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to HUTRR77 usage 0x29f from the consumer page is reserved for
the Desktop application to present all running user’s application windows.
Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's
add the mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to HUTRR37 usage 0x6d from the consumer usage page corresponds
to action that selects the next available supported aspect ratio option
on a device which outputs or displays video. However KEY_ZOOM means
activate "Full Screen" mode, KEY_ASPECT_RATIO should be used instead.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add ASUS Transbook T100CHI/T90CHI keyboard dock into battery quirk list, in
order to add specific implementation in hid-asus.
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Windows uses a magic number of 120 for a wheel click. High-resolution
scroll wheels are supposed to use a fraction of 120 to signal smaller
scroll steps. This is implemented by the Resolution Multiplier in the
device itself.
If the multiplier is present in the report descriptor, set it to the
logical max and then use the resolution multiplier to calculate the
high-resolution events. This is the recommendation by Microsoft, see
http://msdn.microsoft.com/en-us/windows/hardware/gg487477.aspx
Note that all mice encountered so far have a logical min/max of 0/1, so
it's a binary "yes or no" to high-res scrolling anyway.
To make userspace simpler, always enable the REL_WHEEL_HI_RES bit. Where
the device doesn't support high-resolution scrolling, the value for the
high-res data will simply be a multiple of 120 every time. For userspace,
if REL_WHEEL_HI_RES is available that is the one to be used.
Potential side-effect: a device with a Resolution Multiplier applying to
other Input items will have those items set to the logical max as well.
This cannot easily be worked around but it is doubtful such devices exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This reverts commit 1ff2e1a44e.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 044ee89028.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.
Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.
Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Commit 1ff2e1a44e ("HID: input: Create a utility class for counting
scroll events") created the helper function
hid_scroll_counter_handle_scroll()
to handle high-res scroll events and also expose them as regular wheel
events.
But the resulting algorithm was unstable, and causes scrolling to be
very unreliable. When you hit the half-way mark of the highres
multiplier, small highres movements will incorrectly translate into big
traditional wheel movements, causing odd jitters.
Simplify the code and make the output stable.
NOTE! I'm pretty sure this will need further tweaking. But this at
least turns a unusable mouse wheel on my Logitech MX Anywhere 2S into
a usable one.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Harry Cutts <hcutts@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes and new features for driver core. Highlights:
- maximum global item tag report size gets increased to 256
- improved INPUT_PROP reporting for Digitizer devices
Some system may want to know if a detected digitizer device is either an
integrated or an external device. In order to distinguish such condition,
setting either INPUT_PROP_DIRECT or INPUT_PROP_POINTER is required,
checking the member, "application", in "hid_field" structure.
Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To avoid code duplication, this class counts high-resolution scroll
movements and emits the legacy low-resolution events when appropriate.
Drivers should be able to create one instance for each scroll wheel that
they need to handle.
Signed-off-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Or it creates some weird input names like:
"MI Dongle MI Wireless Mouse Mouse"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure to free the custom input node name on disconnect.
Cc: stable@vger.kernel.org # v4.18+
Fixes: c554bb0455 ("HID: input: append a suffix matching the application")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Dell Canvas 27 has a tool that can be put on the surface and acts
as a dial. The firmware processes the detection of the tool and forward
regular HID reports with X, Y, Azimuth, rotation, width/height.
The firmware also exports Contact ID, Countact Count which may hint that
several totems can be used at the same time (the FW only supports one).
We can tell that MT_TOOL_DIAL will be reported by setting the min/max
of ABS_MT_TOOL_TYPE to MT_TOOL_DIAL.
This tool is aimed at being used by the system and not the applications,
so the user space processing should not go through the regular touch
inputs.
We set INPUT_PROP_DIRECT which applies ID_INPUT_TOUCHSCREEN to this new
type of devices, but we will counter this for the time being with the
special udev hwdb entry mentioned above.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1511846
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- improvement of duplicate usage handling in hid-input from Benjamin Tissoires
- Win 8.1 precisioun touchpad spec implementation from Benjamin Tissoires
Given that we create one input node per application, we should name
the input node accordingly to not lose userspace.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is not a good idea to try to fit all types of applications in the
same input report. There are a lot of devices that are needing
the quirk HID_MULTI_INPUT but this quirk doesn't match the actual HID
description as it is based on the report ID.
Given that most devices with MULTI_INPUT I can think of split nicely
the devices inputs into application, it is a good thing to split the
devices by default based on this assumption.
Also make hid-multitouch following this rule, to not have to deal
with too many input created.
While we are at it, fix some checkpatch complaints about converting
'unsigned' to 'unsigned int'.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We were only storing the report in case of QUIRK_MULTI_INPUT.
It is interesting for the upcoming HID_QUIRK_INPUT_PER_APP to also
store the full list of reports that are attached to it.
We need the full list because a device (Advanced Silicon has some)
might want to use a different report ID for the Input reports and
the Output reports. Storing the full list allows the drivers to
have all the data.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is something that bothered us from a long time. When hid-input
doesn't know how to map a usage, it uses *_MISC. But there is something
else which increments the usage if the evdev code is already used.
This leads to few issues:
- some devices may have their ABS_X mapped to ABS_Y if they export a bad
set of usages (see the DragonRise joysticks IIRC -> fixed in a specific
HID driver)
- *_MISC + N might (will) conflict with other defined axes (my Logitech
H800 exports some multitouch axes because of that)
- this prevents to freely add some new evdev usages, because "hey, my
headset will now report ABS_COFFEE, and it's not coffee capable".
So let's try to kill this nonsense, and hope we won't break too many
devices.
I my headset case, the ABS_MISC axes are created because of some
proprietary usages, so we might not break that many devices.
For backward compatibility, a quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE
is created and can be applied to any device that needs this behavior.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The commit 581c448476 ("HID: input: map digitizer battery usage")
assumed that devices having input (qas opposed to feature) report for
battery strength would report the data on their own, without the need to
be polled by the kernel; unfortunately it is not so. Many wireless mice
do not send unsolicited reports with battery strength data and have to
be polled explicitly. As a complication, stylus devices on digitizers
are not normally connected to the base and thus can not be polled - the
base can only determine battery strength in the stylus when it is in
proximity.
To solve this issue, we add a special flag that tells the kernel
to avoid polling the device (and expect unsolicited reports) and set it
when report field with physical usage of digitizer stylus (HID_DG_STYLUS).
Unless this flag is set, and we have not seen the unsolicited reports,
the kernel will attempt to poll the device when userspace attempts to
read "capacity" and "state" attributes of power_supply object
corresponding to the devices battery.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198095
Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin van Es <martin@mrvanes.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no real point of registering an empty input node.
This should be default, but given some drivers need the blank input
node to set it up during input_configured, we need to postpone
the check for hidinput_has_been_populated().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Follow the change of return type u32 of hid_report_len,
fix all the types of variables those get the return value of
hid_report_len to u32, and all other code already uses u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some tablets report eraser usage to indicate the eraser tool tip
is touching the surface. But, hidinput_configure_usage didn't
support the usage, which led it falls into default as ABS_MISC.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The power_supply subsystem tends to emit uevent every time
power_supply_changed() is called, so we should call this API only when battery
strength reported by the device is actually different from the previous
readings, otherwise we'll drown the system in uevents.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Manufacturers do not always populate serial number in their devices, so
let's fall back to device ID when forming the battery device name. As a
result, batteries in devices without serial number will be named like
this:
hid-0018:2D1F:510E.0001-battery
(as opposed to hid--battery for the first one, and failing to create
batteries for the subsequent ones).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We already mapped battery strength reports from the generic device
control page, but we did not update capacity from input reports, nor we
mapped the battery strength report from the digitizer page, so let's
implement this now.
Batteries driven by the input reports will now start in "unknown" state,
and will get updated once we receive first report containing battery
strength from the device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use a better URL for the HUTRR40 Radio HID Usages documentation and use the
HID_GD_WIRELESS_RADIO_CTLS define rather then hardcoding a check for
0x0001000c.
Fixes: 61df56bef9 ("HID: Add mapping for Microsoft Win8 Wireless Radio Controls extensions")
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft has defined some extra HUT codes for the Generic Desktop Page
for Wireless Radio controls, see:
https://docs.microsoft.com/en-us/windows-hardware/drivers/hid/airplane-mode-radio-managementhttps://web.archive.org/web/20170509144631/https://docs.microsoft.com/en-us/windows-hardware/drivers/hid/airplane-mode-radio-management
I've 3 2-in-1 keyboard docks: Dell Venue Pro 11 keyboard dock,
HP pavilion x2 keyboard dock and a PEAQ C1010 keyboard dock which have
a wireless radio toggle hotkey, which uses the 0x000100c6 HUT code
defined in these extensions.
This commit adds a mapping for this key, this makes the rfkill toggle
hotkey work on the Dell Venue Pro 11 and HP Pavilion X2 keyboards,
the PEAQ C1010 keyboard does generate events for the 0x000100c6 HUT
code when pressed, but the reported value is always 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes an issue in drivers/hid/hid-input.c where values
outside of the logical range are not clamped when "null state" bit of
the input control is not set.
This was discussed on the lists [1] and this change stems from the fact
due to the ambiguity of the HID specification it might be appropriate to
follow Microsoft's own interpretation of the specification. As noted in
Microsoft's documentation [2] in the section titled "Required HID usages
for digitizers" it is noted that values reported outside the logical
range "will be considered as invalid data and the value will be changed
to the nearest boundary value (logical min/max)."
This patch fixes an issue where the (1292:4745) Innomedia INNEX
GENESIS/ATARI reports out of range values for its X and Y axis of the
DPad which, due to the null state bit being unset, are forwarded to
userspace as is. Now these values will get clamped to the logical range
before being forwarded to userspace. This device was also used to test
this patch.
This patch expands on commit 3f3752705d ("HID: reject input outside
logical range only if null state is set").
[1]: http://lkml.kernel.org/r/20170307131036.GA853@gaia.local
[2]: https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes an issue in drivers/hid/hid-input.c where USB HID
control null state flag is not checked upon rejecting inputs outside
logical minimum-maximum range. The check should be made according to USB
HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve
issues with some game controllers, such as:
https://bugzilla.kernel.org/show_bug.cgi?id=68621
[tk@the-tk.com: shortened and fixed spelling in commit message]
Signed-off-by: Valtteri Heikkilä <rnd@nic.fi>
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The purpose of HID_QUIRK_MULTI_INPUT is to have an input device per
report id. This is useful when the HID device presents several HID
collections of different device types.
The current implementation of hid-input creates one input node per id per
type (input or output). This is problematic for the LEDs of a keyboard as
they are often set through an output report. The current code creates
one input node with all the keyboard keys, and one other with only the
LEDs.
To solve this, we use a two-passes way:
- first, we initialize all input nodes and associate one per report id
- then, we register all the input nodes
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The "Steering" usage (HID_UP_SIMULATION | 0xc8) is defined in HUT 1.12 as
follows:
"A steering wheel is a single degree-of-freedom device that rotates about
an axis. The zero position is always the neutral or 'straight ahead'
position, with positive values turning clockwise and negative values
turning counterclockwise. If the Coordinate Values Wrap attribute is
set, the steering wheel can be turned past 360 degrees."
The hidinput_configure_usage function canonically maps this usage to the
ABS_WHEEL axis, but hidinput_calc_abs_res does not recognize this axis
as one for which it can calculate a resolution. This effectively prevents
wheels from being assigned a proper resolution that userspace can use
to determine the precise angle of input.
This commit adds ABS_WHEEL as a rotational axis to hidinput_calc_abs_res.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft is reusing its report descriptor again and again, and part of it
looks like this:
0x05, 0x01, // Usage Page (Generic Desktop) 299
0x09, 0x80, // Usage (System Control) 301
0xa1, 0x01, // Collection (Application) 303
0x85, 0x03, // Report ID (3) 305
0x19, 0x00, // Usage Minimum (0) 307
0x29, 0xff, // Usage Maximum (255) 309
0x15, 0x00, // Logical Minimum (0) 311
0x26, 0xff, 0x00, // Logical Maximum (255) 313
0x81, 0x00, // Input (Data,Arr,Abs) 316
0xc0, // End Collection 318
While there is nothing wrong in term of processing, we do however blindly
map the full usage range (it's an array) from 0x00 to 0xff, which creates
some interesting axis, like ABS_X|Y, and a bunch of ABS_MISC + n.
While libinput and other stacks don't care that much (we can detect them),
joydev is very happy and attaches itself to the mouse or keyboard.
The problem is that joydev now handles the device as a joystick, but given
that we have a HID array, it sets all the ABS_* values to 0. And in its
world, 0 means -32767 (minimum value), which sends spurious events to games
(think Steam).
It looks like hid-microsoft tries to tackle the very same problem with its
.report_fixup callback. But fixing the report descriptor is an endless task
and is quite obfuscated.
So take the hammer, and decide that if the application is meant to be
System Control, any other usage not in the System Control range should
be ignored.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354
Link: https://bugzilla.kernel.org/show_bug.cgi?id=28912
Link: https://github.com/ValveSoftware/steam-for-linux/issues/3384
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354
Link: https://bugzilla.kernel.org/show_bug.cgi?id=37982
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>