The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: ea7c38fef0 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: e39d8a186e ("NFSv4: Fix an Oops during delegation callbacks")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we exit _lgopen_prepare_attached() without setting a layout, we will
currently leak the plh_outstanding counter.
Fixes: 411ae722d1 ("pNFS: Wait for stale layoutget calls to complete in pnfs_update_layout()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We must ensure that we pass a layout segment to nfs_retry_commit() when
we're cleaning up after pnfs_bucket_alloc_ds_commits(). Otherwise,
requests that should be committed to the DS will get committed to the
MDS.
Do so by ensuring that pnfs_bucket_get_committing() always tries to
return a layout segment when it returns a non-empty page list.
Fixes: c84bea5944 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In pnfs_generic_clear_request_commit(), we try calling
pnfs_free_bucket_lseg() before we remove the request from the DS bucket.
That will always fail, since the point is to test for whether or not
that bucket is empty.
Fixes: c84bea5944 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a layout return is in progress, we should wait for it to complete,
in case the layout segment we are picking up gets returned too.
Fixes: 30cb3ee299 ("pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the inode is being evicted, it should be safe to run return-on-close,
so we should do it to ensure we don't inadvertently leak layout segments.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the layout return-on-close failed because the layoutreturn was never
sent, then we should mark the layout for return again.
Fixes: 9c47b18cf7 ("pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Several existing dprink()/dfprintk() calls were converted to use the new
mount API logging macros by commit ce8866f091 ("NFS: Attach
supplementary error information to fs_context"). If the fs_context was
not created using fsopen() then it will not have had a log buffer
allocated for it, and the new mount API logging macros will wind up
calling printk().
This can result in syslog messages being logged where previously there
were none... most notably "NFS4: Couldn't follow remote path", which can
happen if the client is auto-negotiating a protocol version with an NFS
server that doesn't support the higher v4.x versions.
Convert the nfs_errorf(), nfs_invalf(), and nfs_warnf() macros to check
for the existence of the fs_context's log buffer and call dprintk() if
it doesn't exist. Add nfs_ferrorf(), nfs_finvalf(), and nfs_warnf(),
which do the same thing but take an NFS debug flag as an argument and
call dfprintk(). Finally, modify the "NFS4: Couldn't follow remote
path" message to use nfs_ferrorf().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207385
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: ce8866f091 ("NFS: Attach supplementary error information to fs_context.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
It is only safe to call the tracepoint before rpc_put_task() because
'data' is freed inside nfs4_lock_release (rpc_release).
Fixes: 48c9579a1a ("Adding stateid information to tracepoints")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support.
- A series of patches to improve readdir performance, particularly with
large directories.
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers.
- Micro-optimisations for RDMA.
- RDMA tracing improvements.
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving partial
pages (Dan Aloni).
- Various fixes for getxattr and listxattr, when used over non-TCP
transports.
- Fixes for containerised NFS from Sargun Dhillon.
- switch nfsiod to be an UNBOUND workqueue (Neil Brown).
- READDIR should not ask for security label information if there is no
LSM policy. (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum Mackay).
- A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code.
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes.
-----BEGIN PGP SIGNATURE-----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=IKWG
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support
- A series of patches to improve readdir performance, particularly
with large directories
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers
- Micro-optimisations for RDMA
- RDMA tracing improvements
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving
partial pages (Dan Aloni)
- Various fixes for getxattr and listxattr, when used over non-TCP
transports
- Fixes for containerised NFS from Sargun Dhillon
- switch nfsiod to be an UNBOUND workqueue (Neil Brown)
- READDIR should not ask for security label information if there is
no LSM policy (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum
Mackay)
- A series of RPC and NFS layer fixes to support the NFSv4.2
READ_PLUS code
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes"
* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
NFSv4/pnfs: Add tracing for the deviceid cache
fs/lockd: convert comma to semicolon
NFSv4.2: fix error return on memory allocation failure
NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
NFSv4.2: decode_read_plus_hole() needs to check the extent offset
NFSv4.2: decode_read_plus_data() must skip padding after data segment
NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
SUNRPC: When expanding the buffer, we may need grow the sparse pages
SUNRPC: Cleanup - constify a number of xdr_buf helpers
SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
SUNRPC: _copy_to/from_pages() now check for zero length
SUNRPC: Cleanup xdr_shrink_bufhead()
SUNRPC: Fix xdr_expand_hole()
SUNRPC: Fixes for xdr_align_data()
SUNRPC: _shift_data_left/right_pages should check the shift length
...
The callers of ff_layout_choose_ds_for_read() should decide whether or
not they want to return the layout on error. Sometimes, we may just want
to retry from the beginning.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently when an alloc_page fails the error return is not set in
variable err and a garbage initialized value is returned. Fix this
by setting err to -ENOMEM before taking the error return path.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a1f26739cc ("NFSv4.2: improve page handling for GETXATTR")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Merge yet more updates from Andrew Morton:
- lots of little subsystems
- a few post-linux-next MM material. Most of the rest awaits more
merging of other trees.
Subsystems affected by this series: alpha, procfs, misc, core-kernel,
bitmap, lib, lz4, checkpatch, nilfs, kdump, rapidio, gcov, bfs, relay,
resource, ubsan, reboot, fault-injection, lzo, apparmor, and mm (swap,
memory-hotplug, pagemap, cleanups, and gup).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (86 commits)
mm: fix some spelling mistakes in comments
mm: simplify follow_pte{,pmd}
mm: unexport follow_pte_pmd
apparmor: remove duplicate macro list_entry_is_head()
lib/lzo/lzo1x_compress.c: make lzogeneric1x_1_compress() static
fault-injection: handle EI_ETYPE_TRUE
reboot: hide from sysfs not applicable settings
reboot: allow to override reboot type if quirks are found
reboot: remove cf9_safe from allowed types and rename cf9_force
reboot: allow to specify reboot mode via sysfs
reboot: refactor and comment the cpu selection code
lib/ubsan.c: mark type_check_kinds with static keyword
kcov: don't instrument with UBSAN
ubsan: expand tests and reporting
ubsan: remove UBSAN_MISC in favor of individual options
ubsan: enable for all*config builds
ubsan: disable UBSAN_TRAP for all*config
ubsan: disable object-size sanitizer under GCC
ubsan: move cc-option tests into Kconfig
ubsan: remove redundant -Wno-maybe-uninitialized
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out
mathematical helpers.
At the same time convert users in header and lib folder to use new
header. Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.
[sfr@canb.auug.org.au: fix powerpc build]
Link: https://lkml.kernel.org/r/20201029150809.13059608@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201028173212.41768-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Improve support for re-exporting NFS mounts
- Replace NFSv4 XDR decoding C macros with xdr_stream helpers
- Support for multiple RPC/RDMA chunks per RPC transaction
-----BEGIN PGP SIGNATURE-----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=1uP3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull nfsd updates from Chuck Lever:
"Several substantial changes this time around:
- Previously, exporting an NFS mount via NFSD was considered to be an
unsupported feature. With v5.11, the community has attempted to
make re-exporting a first-class feature of NFSD.
This would enable the Linux in-kernel NFS server to be used as an
intermediate cache for a remotely-located primary NFS server, for
example, even with other NFS server implementations, like a NetApp
filer, as the primary.
- A short series of patches brings support for multiple RPC/RDMA data
chunks per RPC transaction to the Linux NFS server's RPC/RDMA
transport implementation.
This is a part of the RPC/RDMA spec that the other premiere
NFS/RDMA implementation (Solaris) has had for a very long time, and
completes the implementation of RPC/RDMA version 1 in the Linux
kernel's NFS server.
- Long ago, NFSv4 support was introduced to NFSD using a series of C
macros that hid dprintk's and goto's. Over time, the kernel's XDR
implementation has been greatly improved, but these C macros have
remained and become fallow. A series of patches in this pull
request completely replaces those macros with the use of current
kernel XDR infrastructure. Benefits include:
- More robust input sanitization in NFSD's NFSv4 XDR decoders.
- Make it easier to use common kernel library functions that use
XDR stream APIs (for example, GSS-API).
- Align the structure of the source code with the RFCs so it is
easier to learn, verify, and maintain our XDR implementation.
- Removal of more than a hundred hidden dprintk() call sites.
- Removal of some explicit manipulation of pages to help make the
eventual transition to xdr->bvec smoother.
- On top of several related fixes in 5.10-rc, there are a few more
fixes to get the Linux NFSD implementation of NFSv4.2 inter-server
copy up to speed.
And as usual, there is a pinch of seasoning in the form of a
collection of unrelated minor bug fixes and clean-ups.
Many thanks to all who contributed this time around!"
* tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6: (131 commits)
nfsd: Record NFSv4 pre/post-op attributes as non-atomic
nfsd: Set PF_LOCAL_THROTTLE on local filesystems only
nfsd: Fix up nfsd to ensure that timeout errors don't result in ESTALE
exportfs: Add a function to return the raw output from fh_to_dentry()
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: allow filesystems to opt out of subtree checking
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations
Revert "nfsd4: support change_attr_type attribute"
nfsd4: don't query change attribute in v2/v3 case
nfsd: minor nfsd4_change_attribute cleanup
nfsd: simplify nfsd4_change_info
nfsd: only call inode_query_iversion in the I_VERSION case
nfs_common: need lock during iterate through the list
NFSD: Fix 5 seconds delay when doing inter server copy
NFSD: Fix sparse warning in nfs4proc.c
SUNRPC: Remove XDRBUF_SPARSE_PAGES flag in gss_proxy upcall
sunrpc: clean-up cache downcall
nfsd: Fix message level for normal termination
NFSD: Remove macros that are no longer used
NFSD: Replace READ* macros in nfsd4_decode_compound()
...
We have no way of tracking server READ_PLUS support in pNFS for now, so
just disable it.
Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns more data than we have buffer space for, then
we need to truncate and exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Expanding the READ_PLUS extents can cause the read buffer to overflow.
If it does, then don't error, but just exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a hole extends beyond the READ_PLUS read buffer, then we want to fill
just the remaining buffer with zeros. Also ignore eof...
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The server is allowed to return a hole extent with an offset that starts
before the offset supplied in the READ_PLUS argument. Ensure that we
support that case too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use the existing BITS_PER_LONG macro instead of calculating the value.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
XDRBUF_SPARSE_PAGES can cause problems for the RDMA transport,
and it's easy enough to allocate enough pages for the request
up front, so do that.
Also, since we've allocated the pages anyway, use the full
page aligned length for the receive buffer. This will allow
caching of valid replies that are too large for the caller,
but that still fit in the allocated pages.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We've been seeing failures with xfstests generic/091 and generic/263
when using READ_PLUS. I've made some progress on these issues, and the
tests fail later on but still don't pass. Let's disable READ_PLUS by
default until we can work out what is going on.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit b4868b44c5 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state,
until after the call to update_open_stateid, to indicate this is the 1st
open. This fix is part of a 2 patches, the other patch is the fix in the
source server to return the stateid for COPY_NOTIFY request with seqid 1
instead of 0.
Fixes: ce0887ac96 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145f ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that both getxattr and listxattr page array are correctly
aligned, and that getxattr correctly accounts for the page padding word.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For the case of NFSv4, specify to the client that the pre/post-op
attributes were not recorded atomically with the main operation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Don't set PF_LOCAL_THROTTLE on remote filesystems like NFS, since they
aren't expected to ever be subject to double buffering.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It's not uncommon for some workloads to do a bunch of I/O to a file and
delete it just afterward. If knfsd has a cached open file however, then
the file may still be open when the dentry is unlinked. If the
underlying filesystem is nfs, then that could trigger it to do a
sillyrename.
On a REMOVE or RENAME scan the nfsd_file cache for open files that
correspond to the inode, and proactively unhash and put their
references. This should prevent any delete-on-last-close activity from
occurring, solely due to knfsd's open file cache.
This must be done synchronously though so we use the variants that call
flush_delayed_fput. There are deadlock possibilities if you call
flush_delayed_fput while holding locks, however. In the case of
nfsd_rename, we don't even do the lookups of the dentries to be renamed
until we've locked for rename.
Once we've figured out what the target dentry is for a rename, check to
see whether there are cached open files associated with it. If there
are, then unwind all of the locking, close them all, and then reattempt
the rename.
None of this is really necessary for "typical" filesystems though. It's
mostly of use for NFS, so declare a new export op flag and use that to
determine whether to close the files beforehand.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When we start allowing NFS to be reexported, then we have some problems
when it comes to subtree checking. In principle, we could allow it, but
it would mean encoding parent info in the filehandles and there may not
be enough space for that in a NFSv3 filehandle.
To enforce this at export upcall time, we add a new export_ops flag
that declares the filesystem ineligible for subtree checking.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With NFSv3 nfsd will always attempt to send along WCC data to the
client. This generally involves saving off the in-core inode information
prior to doing the operation on the given filehandle, and then issuing a
vfs_getattr to it after the op.
Some filesystems (particularly clustered or networked ones) have an
expensive ->getattr inode operation. Atomicity is also often difficult
or impossible to guarantee on such filesystems. For those, we're best
off not trying to provide WCC information to the client at all, and to
simply allow it to poll for that information as needed with a GETATTR
RPC.
This patch adds a new flags field to struct export_operations, and
defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate
that nfsd should not attempt to provide WCC info in NFSv3 replies. It
also adds a blurb about the new flags field and flag to the exporting
documentation.
The server will also now skip collecting this information for NFSv2 as
well, since that info is never used there anyway.
Note that this patch does not add this flag to any filesystem
export_operations structures. This was originally developed to allow
reexporting nfs via nfsd.
Other filesystems may want to consider enabling this flag too. It's hard
to tell however which ones have export operations to enable export via
knfsd and which ones mostly rely on them for open-by-filehandle support,
so I'm leaving that up to the individual maintainers to decide. I am
cc'ing the relevant lists for those filesystems that I think may want to
consider adding this though.
Cc: HPDD-discuss@lists.01.org
Cc: ceph-devel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: fuse-devel@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsiod is currently a concurrency-managed workqueue (CMWQ).
This means that workitems scheduled to nfsiod on a given CPU are queued
behind all other work items queued on any CMWQ on the same CPU. This
can introduce unexpected latency.
Occaionally nfsiod can even cause excessive latency. If the work item
to complete a CLOSE request calls the final iput() on an inode, the
address_space of that inode will be dismantled. This takes time
proportional to the number of in-memory pages, which on a large host
working on large files (e.g.. 5TB), can be a large number of pages
resulting in a noticable number of seconds.
We can avoid these latency problems by switching nfsiod to WQ_UNBOUND.
This causes each concurrent work item to gets a dedicated thread which
can be scheduled to an idle CPU.
There is precedent for this as several other filesystems use WQ_UNBOUND
workqueue for handling various async events.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: ada609ee2a ("workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In several patches work has been done to enable NFSv4 to use user
namespaces:
58002399da65: NFSv4: Convert the NFS client idmapper to use the container user namespace
3b7eb5e35d0f: NFS: When mounting, don't share filesystems between different user namespaces
Unfortunately, the userspace APIs were only such that the userspace facing
side of the filesystem (superblock s_user_ns) could be set to a non init
user namespace. This furthers the fs_context related refactoring, and
piggybacks on top of that logic, so the superblock user namespace, and the
NFS user namespace are the same.
Users can still use rpc.idmapd if they choose to, but there are complexities
with user namespaces and request-key that have yet to be addresssed.
Eventually, we will need to at least:
* Come up with an upcall mechanism that can be triggered inside of the container,
or safely triggered outside, with the requisite context to do the right
mapping. * Handle whatever refactoring needs to be done in net/sunrpc.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Tested-by: Alban Crequy <alban.crequy@gmail.com>
Fixes: 62a55d088c ("NFS: Additional refactoring for fs_context conversion")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There was refactoring done to use the fs_context for mounting done in:
62a55d088cd87: NFS: Additional refactoring for fs_context conversion
This made it so that the net_ns is fetched from the fs_context (the netns
that fsopen is called in). This change also makes it so that the credential
fetched during fsopen is used as well as the net_ns.
NFS has already had a number of changes to prepare it for user namespaces:
1a58e8a0e5c1: NFS: Store the credential of the mount process in the nfs_server
264d948ce7d0: NFS: Convert NFSv3 to use the container user namespace
c207db2f5da5: NFS: Convert NFSv2 to use the container user namespace
Previously, different credentials could be used for creation of the
fs_context versus creation of the nfs_server, as FSCONFIG_CMD_CREATE did
the actual credential check, and that's where current_creds() were fetched.
This meant that the user namespace which fsopen was called in could be a
non-init user namespace. This still requires that the user that calls
FSCONFIG_CMD_CREATE has CAP_SYS_ADMIN in the init user ns.
This roughly allows a privileged user to mount on behalf of an unprivileged
usernamespace, by forking off and calling fsopen in the unprivileged user
namespace. It can then pass back that fsfd to the privileged process which
can configure the NFS mount, and then it can call FSCONFIG_CMD_CREATE
before switching back into the mount namespace of the container, and finish
up the mounting process and call fsmount and move_mount.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Tested-by: Alban Crequy <alban.crequy@gmail.com>
Fixes: 62a55d088c ("NFS: Additional refactoring for fs_context conversion")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When returning the layout in nfs4_evict_inode(), we need to ensure that
the layout is actually done being freed before we can proceed to free the
inode itself.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to
contain the length of the data that we expect to want placed in the head
kvec plus a count of 1 word of padding that is placed after the page data.
This is very confusing when trying to read the code, and sometimes leads
to callers adding an arbitrary value of '1' just in order to satisfy the
requirement (whether or not the page data actually needs such padding).
This patch aims to clarify the code by changing the 'hdrsize' argument
to remove that 1 word of padding. This means we need to subtract the
padding from all the existing callers.
Fixes: 02ef04e432 ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We can fit the device_addr4 opaque data padding in the pages.
Fixes: cf500bac8f ("SUNRPC: Introduce rpc_prepare_reply_pages()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use the existing xdr_stream_decode_string_dup() to safely decode into
kmalloced strings.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we report the correct netid when using UDP or RDMA
transports to the DSes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We want to enable RDMA and UDP as valid transport methods if a
GETDEVICEINFO call specifies it. Do so by adding a parser for the
netid that translates it to an appropriate argument for the RPC
transport layer.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the pNFS metadata server advertises multiple addresses for the same
data server, we should try to connect to just one protocol family and
transport type on the assumption that homogeneity will improve performance.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chuck Lever