This patch adds support for software clock gating to UVD 5
and UVD 6 blocks with a preliminary commented out hardware
gating routine.
Currently hardware gating does not work so it's not activated.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The values of all but the RADEON_HPD_NONE members of the radeon_hpd_id
enum transform 1:1 into bit positions within the 'enabled' bitset as
assembled by evergreen_hpd_init():
enabled |= 1 << radeon_connector->hpd.hpd;
However, if ->hpd.hpd happens to equal RADEON_HPD_NONE == 0xff, UBSAN
reports
UBSAN: Undefined behaviour in drivers/gpu/drm/radeon/evergreen.c:1867:16
shift exponent 255 is too large for 32-bit type 'int'
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e
[<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
[<ffffffffa0ba7f2e>] ? atom_execute_table+0x3e/0x50 [radeon]
[<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
[<ffffffffa0b87700>] ? radeon_get_pll_use_mask+0x130/0x130 [radeon]
[<ffffffff81219930>] ? wake_up_klogd_work_func+0x60/0x60
[<ffffffff8121a35e>] ? vprintk_default+0x3e/0x60
[<ffffffffa0c603c4>] evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0c603c4>] ? evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0bd196e>] radeon_modeset_init+0x8ce/0x18d0 [radeon]
[<ffffffffa0b71d86>] radeon_driver_load_kms+0x186/0x350 [radeon]
[<ffffffffa03b6b16>] drm_dev_register+0xc6/0x100 [drm]
[<ffffffffa03bc8c4>] drm_get_pci_dev+0xe4/0x490 [drm]
[<ffffffff814b83f0>] ? kfree+0x220/0x370
[<ffffffffa0b687c2>] radeon_pci_probe+0x112/0x140 [radeon]
[...]
=====================================================================
radeon 0000:01:00.0: No connectors reported connected with modes
At least on x86, there should be no user-visible impact as there
1 << 0xff == 1 << (0xff & 31) == 1 << 31
holds and 31 > RADEON_MAX_HPD_PINS. Thus, this patch is a cosmetic one.
All of the above applies analogously to evergreen_hpd_fini(),
r100_hpd_init(), r100_hpd_fini(), r600_hpd_init(), r600_hpd_fini(),
rs600_hpd_init() and rs600_hpd_fini()
Silence UBSAN by checking ->hpd.hpd for RADEON_HPD_NONE before oring it
into the 'enabled' bitset in the *_init()- or the 'disabled' bitset in
the *_fini()-functions respectively.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
White space fix.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is not a fatal error.
v2: add comment why ignore the error here.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to soft reset VCE as part of the clockgating
sequence.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is to fix fatal page fault error that occured if:
job is signaled/released after its timeout work is already
put to the global queue (in this case the cancel_delayed_work
will return false), which will lead to NX-protection error
page fault during job_timeout_func.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two callbacks to scheduler to maintain jobs, and invoked for
job timeout calculations. Now TDR measures time gap from
job is processed by hw.
v2:
fix typo
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
original time out detect routine is incorrect, cuz it measures
the gap from job scheduled, but we should only measure the
gap from processed by hw.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the mirror_list will be used for later time out detect
feature. This is needed to properly detect a GPU
timeout with the scheduler.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for those jobs submitted through scheduler, do not
free it immediately after scheduled, instead free it
in global workqueue by its sched fence signaling
callback function.
v2:
call uf's bo_undef after job_run()
call job's sync free after job_run()
no static inline __amdgpu_job_free() anymore, just use
kfree(job) to replace it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consolidate job initialization in one place rather than
duplicating it in multiple places.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More ground work for conditional execution on SDMA
necessary for preemption.
Signed-off-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the groundwork for conditional execution on
SDMA which is necessary for preemption.
Signed-off-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: the signaled items on the LRU maintain their order
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is only used locally in amdgpu_get_bios
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPU block like UVD and VCE require hard reset to be properly
resume if there is no real powerdown of the asic like during various
hibernation step. This patch perform such hard reset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, like when freezing for hibernation, we need to be
able to force hard reset even if no engine are stuck. This patch
add a bool option to current asic reset callback to allow to force
hard reset on asic that supports it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quite few suspend/hibernation bugs are related to this block. Add
an option to disable those as a work around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quite few suspend/hibernation bugs are related to this block. Add
an option to disable those as a work around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will later on serve for module option to disable vce.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds very rudimentary TCON (timing controller for raw LCD displays)
support to enable the bypass mode in order to use the DCU controller on
Freescale/NXP Vybrid SoC's.
Additionally the register clock and pixel clock has been separated, but
are currently still enabled and disabled pairwise.
Other than that, fixes and cleanups accross the driver.
* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: increment version and date
drm/fsl-dcu: implement lastclose callback
drm/fsl-dcu: disable output polling on driver unload
drm/fsl-dcu: deallocate fbdev CMA on unload
drm/fsl-dcu: use variable name dev for struct drm_device
drm/fsl-dcu: handle missing panel gracefully
drm/fsl-dcu: detach panel on destroy
drm/layerscape: reduce excessive stack usage
drm/fsl-dcu: add TCON driver
drm/fsl-dcu: use common clock framework for pixel clock divider
drm/fsl-dcu: add extra clock for pixel clock
drm/fsl-dcu: disable clock on initialization failure and remove
This pull request introduces the sun4i driver, meant to be used on the
older Allwinner SoCs (A10, A13, A20, A23, A31 and A33).
It currently supports only the A13, which has one of the simplest video
pipeline. Support for other video components and SoCs will be added
eventually.
It supports only a RGB or composite output. It doesn't do HDMI, VGA, LVDS
or power management yet, but that will come in time as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q39n
-----END PGP SIGNATURE-----
Merge tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM driver for 4.7
This pull request introduces the sun4i driver, meant to be used on the
older Allwinner SoCs (A10, A13, A20, A23, A31 and A33).
It currently supports only the A13, which has one of the simplest video
pipeline. Support for other video components and SoCs will be added
eventually.
It supports only a RGB or composite output. It doesn't do HDMI, VGA, LVDS
or power management yet, but that will come in time as well.
* tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
MAINTAINERS: Add a maintainer for the Allwinner DRM driver
drm: sun4i: tv: Add NTSC output standard
drm: sun4i: tv: Add PAL output standard
drm: sun4i: Add composite output
drm: sun4i: Add RGB output
drm: Add Allwinner A10 Display Engine support
drm: sun4i: Add DT bindings documentation
drm: fb: Add seq_file definition
Add the settings to support the NTSC standard.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we have support for the composite output, we can start adding new
supported standards. Start with PAL, and we will add other eventually.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.
Add support for that TV encoder.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The display pipeline of the Allwinner A10 is involving several loosely
coupled components.
Add a documentation for the bindings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Otherwise, building with DEBUG_FS enabled will trigger a build warning
because we're using a structure that has not been declared.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Need to move the free function around a bit, but otherwise mostly
just removing code.
Specifically we can nuke all the _locked variants since the weak idr
reference is now protected by the idr_mutex, which we never hold
anywhere expect in the lookup/reg/unreg functions. And those never
call anything else.
Another benefit of this is that this patch switches the weak reference
logic from kref_put_mutex to kref_get_unless_zero. And the later is in
general more flexible wrt accomodating multiple weak references
protected by different locks, which might or might not come handy
eventually.
But one consequence of that switch is that we need to acquire the
blob_lock from the free function for the list_del calls. That's a bit
tricky to pull off, but works well if we pick the exact same scheme as
is already used for framebuffers. Most important changes:
- filp list is maintainer by create/destroy_blob ioctls directly
(already the case, so we can just remove the redundant list_del from
the free function).
- filp close handler walks the filp-private list lockless - works
because we know no one else can access it. I copied the same comment
from the fb code over to explain this.
- Otherwise we need to sufficiently restrict blob_lock critical
sections to avoid all the unreference calls. Easy to do once the
blob_lock only protects the list, and no longer the weak reference.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie had at least the refcount leak fixed in a later patch (but
that patch does other things which need a bit more work). But we still
have the trouble that silly userspace could hit the WARN_ON in
drm_mode_object_find.
Fix this all up to make sure we don't leak objects, and don't spew
into demsg.
Fixes: d0f37cf629 ("drm/mode: move framebuffer reference into object.")
Testcase: igt/kms_addfb_basic/invalid-*-prop*
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Slipped through the cracks in my review. The one issue I spotted
is that drm_mode_object_find now acquires references and can be
used on FB objects, which caused follow-on bugs in get/set_prop ioctls.
Follow-up patches will fix that.
[airlied: fixup some incr fb/decr object mixups]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is DRM driver for ARC PGU - simple bitstreamer used on
Synopsys ARC SDP boards (both AXS101 and AXS103).
* 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
arc: axs10x - add support of ARC PGU
MAINTAINERS: Add maintainer for ARC PGU display controller
drm: Add DT bindings documentation for ARC PGU display controller
drm: Add support of ARC PGU display controller
One cannot rename the struct at this point, so might as well remove the
comment.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tom St Denis