Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7.
- Background
The Android terminology used for forking a new process and starting an app
from scratch is a cold start, while resuming an existing app is a hot
start. While we continually try to improve the performance of cold
starts, hot starts will always be significantly less power hungry as well
as faster so we are trying to make hot start more likely than cold start.
To increase hot start, Android userspace manages the order that apps
should be killed in a process called ActivityManagerService.
ActivityManagerService tracks every Android app or service that the user
could be interacting with at any time and translates that into a ranked
list for lmkd(low memory killer daemon). They are likely to be killed by
lmkd if the system has to reclaim memory. In that sense they are similar
to entries in any other cache. Those apps are kept alive for
opportunistic performance improvements but those performance improvements
will vary based on the memory requirements of individual workloads.
- Problem
Naturally, cached apps were dominant consumers of memory on the system.
However, they were not significant consumers of swap even though they are
good candidate for swap. Under investigation, swapping out only begins
once the low zone watermark is hit and kswapd wakes up, but the overall
allocation rate in the system might trip lmkd thresholds and cause a
cached process to be killed(we measured performance swapping out vs.
zapping the memory by killing a process. Unsurprisingly, zapping is 10x
times faster even though we use zram which is much faster than real
storage) so kill from lmkd will often satisfy the high zone watermark,
resulting in very few pages actually being moved to swap.
- Approach
The approach we chose was to use a new interface to allow userspace to
proactively reclaim entire processes by leveraging platform information.
This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages
that are known to be cold from userspace and to avoid races with lmkd by
reclaiming apps as soon as they entered the cached state. Additionally,
it could provide many chances for platform to use much information to
optimize memory efficiency.
To achieve the goal, the patchset introduce two new options for madvise.
One is MADV_COLD which will deactivate activated pages and the other is
MADV_PAGEOUT which will reclaim private pages instantly. These new
options complement MADV_DONTNEED and MADV_FREE by adding non-destructive
ways to gain some free memory space. MADV_PAGEOUT is similar to
MADV_DONTNEED in a way that it hints the kernel that memory region is not
currently needed and should be reclaimed immediately; MADV_COLD is similar
to MADV_FREE in a way that it hints the kernel that memory region is not
currently needed and should be reclaimed when memory pressure rises.
This patch (of 5):
When a process expects no accesses to a certain memory range, it could
give a hint to kernel that the pages can be reclaimed when memory pressure
happens but data should be preserved for future use. This could reduce
workingset eviction so it ends up increasing performance.
This patch introduces the new MADV_COLD hint to madvise(2) syscall.
MADV_COLD can be used by a process to mark a memory range as not expected
to be used in the near future. The hint can help kernel in deciding which
pages to evict early during memory pressure.
It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves
active file page -> inactive file LRU
active anon page -> inacdtive anon LRU
Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file
LRU's head because MADV_COLD is a little bit different symantic.
MADV_FREE means it's okay to discard when the memory pressure because the
content of the page is *garbage* so freeing such pages is almost zero
overhead since we don't need to swap out and access afterward causes just
minor fault. Thus, it would make sense to put those freeable pages in
inactive file LRU to compete other used-once pages. It makes sense for
implmentaion point of view, too because it's not swapbacked memory any
longer until it would be re-dirtied. Even, it could give a bonus to make
them be reclaimed on swapless system. However, MADV_COLD doesn't mean
garbage so reclaiming them requires swap-out/in in the end so it's bigger
cost. Since we have designed VM LRU aging based on cost-model, anonymous
cold pages would be better to position inactive anon's LRU list, not file
LRU. Furthermore, it would help to avoid unnecessary scanning if system
doesn't have a swap device. Let's start simpler way without adding
complexity at this moment. However, keep in mind, too that it's a caveat
that workloads with a lot of pages cache are likely to ignore MADV_COLD on
anonymous memory because we rarely age anonymous LRU lists.
* man-page material
MADV_COLD (since Linux x.x)
Pages in the specified regions will be treated as less-recently-accessed
compared to pages in the system with similar access frequencies. In
contrast to MADV_FREE, the contents of the region are preserved regardless
of subsequent writes to pages.
MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP
pages.
[akpm@linux-foundation.org: resolve conflicts with hmm.git]
Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
constrained_alloc() calculates the size of the oom domain by using
node_spanned_pages which is incorrect because this is the full range of
the physical memory range that the numa node occupies rather than the
memory that backs that range which is represented by node_present_pages.
Sparsely populated nodes (e.g. after memory hot remove or simply sparse
due to memory layout) can have really a large difference between the two.
This shouldn't really cause any real user observable problems because the
oom calculates a ratio against totalpages and used memory cannot exceed
present pages but it is confusing and wrong from code point of view.
Link: http://lkml.kernel.org/r/20190829163443.899-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ac311a14c6 ("oom: decouple mems_allowed from
oom_unkillable_task") changed has_intersects_mems_allowed() to
oom_cpuset_eligible(), but didn't change the comment.
Link: http://lkml.kernel.org/r/1566959929-10638-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For an OOM event: print oom_score_adj value for the OOM Killed process to
document what the oom score adjust value was at the time the process was
OOM Killed. The adjustment value can be set by user code and it affects
the resulting oom_score so it is used to influence kill process selection.
When eligible tasks are not printed (sysctl oom_dump_tasks = 0) printing
this value is the only documentation of the value for the process being
killed. Having this value on the Killed process message is useful to
document if a miscconfiguration occurred or to confirm that the
oom_score_adj configuration applies as expected.
An example which illustates both misconfiguration and validation that the
oom_score_adj was applied as expected is:
Aug 14 23:00:02 testserver kernel: Out of memory: Killed process 2692
(systemd-udevd) total-vm:1056800kB, anon-rss:1052760kB, file-rss:4kB,
shmem-rss:0kB pgtables:22kB oom_score_adj:1000
The systemd-udevd is a critical system application that should have an
oom_score_adj of -1000. It was miconfigured to have a adjustment of 1000
making it a highly favored OOM kill target process. The output documents
both the misconfiguration and the fact that the process was correctly
targeted by OOM due to the miconfiguration. This can be quite helpful for
triage and problem determination.
The addition of the pgtables_bytes shows page table usage by the process
and is a useful measure of the memory size of the process.
Link: http://lkml.kernel.org/r/20190822173157.1569-1-echron@arista.com
Signed-off-by: Edward Chron <echron@arista.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the event of an oom kill, useful information about the killed process
is printed to dmesg. Users, especially system administrators, will find
it useful to immediately see the UID of the process.
We already print uid when dumping eligible tasks so it is not overly hard
to find that information in the oom report. However this information is
unavailable when dumping of eligible tasks is disabled.
In the following example, abuse_the_ram is the name of a program that
attempts to iteratively allocate all available memory until it is stopped
by force.
Current message:
Out of memory: Killed process 35389 (abuse_the_ram)
total-vm:133718232kB, anon-rss:129624980kB, file-rss:0kB,
shmem-rss:0kB
Patched message:
Out of memory: Killed process 2739 (abuse_the_ram),
total-vm:133880028kB, anon-rss:129754836kB, file-rss:0kB,
shmem-rss:0kB, UID:0
[akpm@linux-foundation.org: s/UID %d/UID:%u/ in printk]
Link: http://lkml.kernel.org/r/1560362273-534-1-git-send-email-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit bbbe480297 ("mm, oom: remove 'prefer children over
parent' heuristic") removed the
"%s: Kill process %d (%s) score %u or sacrifice child\n"
line, oc->chosen_points is no longer used after select_bad_process().
Link: http://lkml.kernel.org/r/1560853435-15575-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
oom_unkillable_task() can be called from three different contexts i.e.
global OOM, memcg OOM and oom_score procfs interface. At the moment
oom_unkillable_task() does a task_in_mem_cgroup() check on the given
process. Since there is no reason to perform task_in_mem_cgroup()
check for global OOM and oom_score procfs interface, those contexts
provide NULL memcg and skips the task_in_mem_cgroup() check. However
for memcg OOM context, the oom_unkillable_task() is always called from
mem_cgroup_scan_tasks() and thus task_in_mem_cgroup() check becomes
redundant and effectively dead code. So, just remove the
task_in_mem_cgroup() check altogether.
Link: http://lkml.kernel.org/r/20190624212631.87212-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dump_tasks() traverses all the existing processes even for the memcg OOM
context which is not only unnecessary but also wasteful. This imposes a
long RCU critical section even from a contained context which can be quite
disruptive.
Change dump_tasks() to be aligned with select_bad_process and use
mem_cgroup_scan_tasks to selectively traverse only processes of the target
memcg hierarchy during memcg OOM.
Link: http://lkml.kernel.org/r/20190617231207.160865-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit c03cd7738a ("cgroup: Include dying leaders with live
threads in PROCS iterations") corrected how CSS_TASK_ITER_PROCS works,
mem_cgroup_scan_tasks() can use CSS_TASK_ITER_PROCS in order to check
only one thread from each thread group.
[penguin-kernel@I-love.SAKURA.ne.jp: remove thread group leader check in oom_evaluate_task()]
Link: http://lkml.kernel.org/r/1560853257-14934-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Link: http://lkml.kernel.org/r/c763afc8-f0ae-756a-56a7-395f625b95fc@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In dump_oom_summary() oc->constraint is used to show oom_constraint_text,
but it hasn't been set before. So the value of it is always the default
value 0. We should inititialize it before.
Bellow is the output when memcg oom occurs,
before this patch:
oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=7997,uid=0
after this patch:
oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=13681,uid=0
Link: http://lkml.kernel.org/r/1560522038-15879-1-git-send-email-laoar.shao@gmail.com
Fixes: ef8444ea01 ("mm, oom: reorganize the oom report in dump_header")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wind Yu <yuzhoujian@didichuxing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).
Users of mmu notifier API track changes to the CPU page table and take
specific action for them. While current API only provide range of virtual
address affected by the change, not why the changes is happening.
This patchset do the initial mechanical convertion of all the places that
calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP
event as well as the vma if it is know (most invalidation happens against
a given vma). Passing down the vma allows the users of mmu notifier to
inspect the new vma page protection.
The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier
should assume that every for the range is going away when that event
happens. A latter patch do convert mm call path to use a more appropriate
events for each call.
This is done as 2 patches so that no call site is forgotten especialy
as it uses this following coccinelle patch:
%<----------------------------------------------------------------------
@@
identifier I1, I2, I3, I4;
@@
static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1,
+enum mmu_notifier_event event,
+unsigned flags,
+struct vm_area_struct *vma,
struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... }
@@
@@
-#define mmu_notifier_range_init(range, mm, start, end)
+#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end)
@@
expression E1, E3, E4;
identifier I1;
@@
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, I1,
I1->vm_mm, E3, E4)
...>
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(..., struct vm_area_struct *VMA, ...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(...) {
struct vm_area_struct *VMA;
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN;
@@
FN(...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, NULL,
E2, E3, E4)
...> }
---------------------------------------------------------------------->%
Applied with:
spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place
spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place
spatch --sp-file mmu-notifier.spatch --dir mm --in-place
Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the start of the git history of Linux, the kernel after selecting
the worst process to be oom-killed, prefer to kill its child (if the
child does not share mm with the parent). Later it was changed to
prefer to kill a child who is worst. If the parent is still the worst
then the parent will be killed.
This heuristic assumes that the children did less work than their parent
and by killing one of them, the work lost will be less. However this is
very workload dependent. If there is a workload which can benefit from
this heuristic, can use oom_score_adj to prefer children to be killed
before the parent.
The select_bad_process() has already selected the worst process in the
system/memcg. There is no need to recheck the badness of its children
and hoping to find a worse candidate. That's a lot of unneeded racy
work. Also the heuristic is dangerous because it make fork bomb like
workloads to recover much later because we constantly pick and kill
processes which are not memory hogs. So, let's remove this whole
heuristic.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190121215850.221745-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Syzbot instance running on upstream kernel found a use-after-free bug in
oom_kill_process. On further inspection it seems like the process
selected to be oom-killed has exited even before reaching
read_lock(&tasklist_lock) in oom_kill_process(). More specifically the
tsk->usage is 1 which is due to get_task_struct() in oom_evaluate_task()
and the put_task_struct within for_each_thread() frees the tsk and
for_each_thread() tries to access the tsk. The easiest fix is to do
get/put across the for_each_thread() on the selected task.
Now the next question is should we continue with the oom-kill as the
previously selected task has exited? However before adding more
complexity and heuristics, let's answer why we even look at the children
of oom-kill selected task? The select_bad_process() has already selected
the worst process in the system/memcg. Due to race, the selected
process might not be the worst at the kill time but does that matter?
The userspace can use the oom_score_adj interface to prefer children to
be killed before the parent. I looked at the history but it seems like
this is there before git history.
Link: http://lkml.kernel.org/r/20190121215850.221745-1-shakeelb@google.com
Reported-by: syzbot+7fbbfa368521945f0e3d@syzkaller.appspotmail.com
Fixes: 6b0c81b3be ("mm, oom: reduce dependency on tasklist_lock")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arkadiusz reported that enabling memcg's group oom killing causes
strange memcg statistics where there is no task in a memcg despite the
number of tasks in that memcg is not 0. It turned out that there is a
bug in wake_oom_reaper() which allows enqueuing same task twice which
makes impossible to decrease the number of tasks in that memcg due to a
refcount leak.
This bug existed since the OOM reaper became invokable from
task_will_free_mem(current) path in out_of_memory() in Linux 4.7,
T1@P1 |T2@P1 |T3@P1 |OOM reaper
----------+----------+----------+------------
# Processing an OOM victim in a different memcg domain.
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
out_of_memory()
oom_kill_process(P1)
do_send_sig_info(SIGKILL, @P1)
mark_oom_victim(T1@P1)
wake_oom_reaper(T1@P1) # T1@P1 is enqueued.
mutex_unlock(&oom_lock)
out_of_memory()
mark_oom_victim(T2@P1)
wake_oom_reaper(T2@P1) # T2@P1 is enqueued.
mutex_unlock(&oom_lock)
out_of_memory()
mark_oom_victim(T1@P1)
wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL.
mutex_unlock(&oom_lock)
# Completed processing an OOM victim in a different memcg domain.
spin_lock(&oom_reaper_lock)
# T1P1 is dequeued.
spin_unlock(&oom_reaper_lock)
but memcg's group oom killing made it easier to trigger this bug by
calling wake_oom_reaper() on the same task from one out_of_memory()
request.
Fix this bug using an approach used by commit 855b018325 ("oom,
oom_reaper: disable oom_reaper for oom_kill_allocating_task"). As a
side effect of this patch, this patch also avoids enqueuing multiple
threads sharing memory via task_will_free_mem(current) path.
Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp
Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp
Fixes: af8e15cc85 ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: Jay Kamat <jgkamat@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid having to change many call sites everytime we want to add a
parameter use a structure to group all parameters for the mmu_notifier
invalidate_range_start/end cakks. No functional changes with this patch.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
From: Jérôme Glisse <jglisse@redhat.com>
Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3
fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n
Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current oom report doesn't display victim's memcg context during the
global OOM situation. While this information is not strictly needed, it
can be really helpful for containerized environments to locate which
container has lost a process. Now that we have a single line for the oom
context, we can trivially add both the oom memcg (this can be either
global_oom or a specific memcg which hits its hard limits) and task_memcg
which is the victim's memcg.
Below is the single line output in the oom report after this patch.
- global oom context information:
oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,global_oom,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid>
- memcg oom context information:
oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,oom_memcg=<memcg>,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid>
[penguin-kernel@I-love.SAKURA.ne.jp: use pr_cont() in mem_cgroup_print_oom_context()]
Link: http://lkml.kernel.org/r/201812190723.wBJ7NdkN032628@www262.sakura.ne.jp
Link: http://lkml.kernel.org/r/1542799799-36184-2-git-send-email-ufo19890607@gmail.com
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Roman Gushchin <guro@fb.com>
Cc: Yang Shi <yang.s@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
Now that siginfo is never allocated for SIGKILL and SIGSTOP there is
no difference between SEND_SIG_PRIV and SEND_SIG_FORCED for SIGKILL
and SIGSTOP. This makes SEND_SIG_FORCED unnecessary and redundant in
the presence of SIGKILL and SIGSTOP. Therefore change users of
SEND_SIG_FORCED that are sending SIGKILL or SIGSTOP to use
SEND_SIG_PRIV instead.
This removes the last users of SEND_SIG_FORCED.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Commit 93065ac753 ("mm, oom: distinguish blockable mode for mmu
notifiers") has added an ability to skip over vmas with blockable mmu
notifiers. This however didn't call tlb_finish_mmu as it should.
As a result inc_tlb_flush_pending has been called without its pairing
dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush
even though this is not really needed. This alone is not harmful and it
seems there shouldn't be any such callers for oom victims at all but
there is no real reason to skip tlb_finish_mmu on early skip either so
call it.
[mhocko@suse.com: new changelog]
Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the memcg OOM killer runs out of killable tasks, it currently
prints a WARN with no further OOM context. This has caused some user
confusion.
Warnings indicate a kernel problem. In a reported case, however, the
situation was triggered by a nonsensical memcg configuration (hard limit
set to 0). But without any VM context this wasn't obvious from the
report, and it took some back and forth on the mailing list to identify
what is actually a trivial issue.
Handle this OOM condition like we handle it in the global OOM killer:
dump the full OOM context and tell the user we ran out of tasks.
This way the user can identify misconfigurations easily by themselves
and rectify the problem - without having to go through the hassle of
running into an obscure but unsettling warning, finding the appropriate
kernel mailing list and waiting for a kernel developer to remote-analyze
that the memcg configuration caused this.
If users cannot make sense of why the OOM killer was triggered or why it
failed, they will still report it to the mailing list, we know that from
experience. So in case there is an actual kernel bug causing this,
kernel developers will very likely hear about it.
Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
- the rest of MM
- procfs updates
- various misc things
- more y2038 fixes
- get_maintainer updates
- lib/ updates
- checkpatch updates
- various epoll updates
- autofs updates
- hfsplus
- some reiserfs work
- fatfs updates
- signal.c cleanups
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits)
ipc/util.c: update return value of ipc_getref from int to bool
ipc/util.c: further variable name cleanups
ipc: simplify ipc initialization
ipc: get rid of ids->tables_initialized hack
lib/rhashtable: guarantee initial hashtable allocation
lib/rhashtable: simplify bucket_table_alloc()
ipc: drop ipc_lock()
ipc/util.c: correct comment in ipc_obtain_object_check
ipc: rename ipcctl_pre_down_nolock()
ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()
ipc: reorganize initialization of kern_ipc_perm.seq
ipc: compute kern_ipc_perm.id under the ipc lock
init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp
adfs: use timespec64 for time conversion
kernel/sysctl.c: fix typos in comments
drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
fork: don't copy inconsistent signal handler state to child
signal: make get_signal() return bool
signal: make sigkill_pending() return bool
...
For some workloads an intervention from the OOM killer can be painful.
Killing a random task can bring the workload into an inconsistent state.
Historically, there are two common solutions for this
problem:
1) enabling panic_on_oom,
2) using a userspace daemon to monitor OOMs and kill
all outstanding processes.
Both approaches have their downsides: rebooting on each OOM is an obvious
waste of capacity, and handling all in userspace is tricky and requires a
userspace agent, which will monitor all cgroups for OOMs.
In most cases an in-kernel after-OOM cleaning-up mechanism can eliminate
the necessity of enabling panic_on_oom. Also, it can simplify the cgroup
management for userspace applications.
This commit introduces a new knob for cgroup v2 memory controller:
memory.oom.group. The knob determines whether the cgroup should be
treated as an indivisible workload by the OOM killer. If set, all tasks
belonging to the cgroup or to its descendants (if the memory cgroup is not
a leaf cgroup) are killed together or not at all.
To determine which cgroup has to be killed, we do traverse the cgroup
hierarchy from the victim task's cgroup up to the OOMing cgroup (or root)
and looking for the highest-level cgroup with memory.oom.group set.
Tasks with the OOM protection (oom_score_adj set to -1000) are treated as
an exception and are never killed.
This patch doesn't change the OOM victim selection algorithm.
Link: http://lkml.kernel.org/r/20180802003201.817-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "introduce memory.oom.group", v2.
This is a tiny implementation of cgroup-aware OOM killer, which adds an
ability to kill a cgroup as a single unit and so guarantee the integrity
of the workload.
Although it has only a limited functionality in comparison to what now
resides in the mm tree (it doesn't change the victim task selection
algorithm, doesn't look at memory stas on cgroup level, etc), it's also
much simpler and more straightforward. So, hopefully, we can avoid having
long debates here, as we had with the full implementation.
As it doesn't prevent any futher development, and implements an useful and
complete feature, it looks as a sane way forward.
This patch (of 2):
oom_kill_process() consists of two logical parts: the first one is
responsible for considering task's children as a potential victim and
printing the debug information. The second half is responsible for
sending SIGKILL to all tasks sharing the mm struct with the given victim.
This commit splits oom_kill_process() with an intention to re-use the the
second half: __oom_kill_process().
The cgroup-aware OOM killer will kill multiple tasks belonging to the
victim cgroup. We don't need to print the debug information for the each
task, as well as play with task selection (considering task's children),
so we can't use the existing oom_kill_process().
Link: http://lkml.kernel.org/r/20171130152824.1591-2-guro@fb.com
Link: http://lkml.kernel.org/r/20180802003201.817-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew has noticed some inconsistencies in oom_reap_task_mm. Notably
- Undocumented return value.
- comment "failed to reap part..." is misleading - sounds like it's
referring to something which happened in the past, is in fact
referring to something which might happen in the future.
- fails to call trace_finish_task_reaping() in one case
- code duplication.
- Increases mmap_sem hold time a little by moving
trace_finish_task_reaping() inside the locked region. So sue me ;)
- Sharing the finish: path means that the trace event won't
distinguish between the two sources of finishing.
Add a short explanation for the return value and fix the rest by
reorganizing the function a bit to have unified function exit paths.
Link: http://lkml.kernel.org/r/20180724141747.GP28386@dhcp22.suse.cz
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The default page memory unit of OOM task dump events might not be
intuitive and potentially misleading for the non-initiated when debugging
OOM events: These are pages and not kBs. Add a small printk prior to the
task dump informing that the memory units are actually memory _pages_.
Also extends PID field to align on up to 7 characters.
Reference https://lkml.org/lkml/2018/7/3/1201
Link: http://lkml.kernel.org/r/c795eb5129149ed8a6345c273aba167ff1bbd388.1530715938.git.rfreire@redhat.com
Signed-off-by: Rodrigo Freire <rfreire@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
oom_reaper used to rely on the oom_lock since e2fe14564d ("oom_reaper:
close race with exiting task"). We do not really need the lock anymore
though. 2129258024 ("mm: oom: let oom_reap_task and exit_mmap run
concurrently") has removed serialization with the exit path based on the
mm reference count and so we do not really rely on the oom_lock anymore.
Tetsuo was arguing that at least MMF_OOM_SKIP should be set under the lock
to prevent from races when the page allocator didn't manage to get the
freed (reaped) memory in __alloc_pages_may_oom but it sees the flag later
on and move on to another victim. Although this is possible in principle
let's wait for it to actually happen in real life before we make the
locking more complex again.
Therefore remove the oom_lock for oom_reaper paths (both exit_mmap and
oom_reap_task_mm). The reaper serializes with exit_mmap by mmap_sem +
MMF_OOM_SKIP flag. There is no synchronization with out_of_memory path
now.
[mhocko@kernel.org: oom_reap_task_mm should return false when __oom_reap_task_mm did]
Link: http://lkml.kernel.org/r/20180724141747.GP28386@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180719075922.13784-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several blockable mmu notifiers which might sleep in
mmu_notifier_invalidate_range_start and that is a problem for the
oom_reaper because it needs to guarantee a forward progress so it cannot
depend on any sleepable locks.
Currently we simply back off and mark an oom victim with blockable mmu
notifiers as done after a short sleep. That can result in selecting a new
oom victim prematurely because the previous one still hasn't torn its
memory down yet.
We can do much better though. Even if mmu notifiers use sleepable locks
there is no reason to automatically assume those locks are held. Moreover
majority of notifiers only care about a portion of the address space and
there is absolutely zero reason to fail when we are unmapping an unrelated
range. Many notifiers do really block and wait for HW which is harder to
handle and we have to bail out though.
This patch handles the low hanging fruit.
__mmu_notifier_invalidate_range_start gets a blockable flag and callbacks
are not allowed to sleep if the flag is set to false. This is achieved by
using trylock instead of the sleepable lock for most callbacks and
continue as long as we do not block down the call chain.
I think we can improve that even further because there is a common pattern
to do a range lookup first and then do something about that. The first
part can be done without a sleeping lock in most cases AFAICS.
The oom_reaper end then simply retries if there is at least one notifier
which couldn't make any progress in !blockable mode. A retry loop is
already implemented to wait for the mmap_sem and this is basically the
same thing.
The simplest way for driver developers to test this code path is to wrap
userspace code which uses these notifiers into a memcg and set the hard
limit to hit the oom. This can be done e.g. after the test faults in all
the mmu notifier managed memory and set the hard limit to something really
small. Then we are looking for a proper process tear down.
[akpm@linux-foundation.org: coding style fixes]
[akpm@linux-foundation.org: minor code simplification]
Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp
Reported-by: David Rientjes <rientjes@google.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
Tetsuo has pointed out that since 27ae357fa8 ("mm, oom: fix concurrent
munlock and oom reaper unmap, v3") we have a strong synchronization
between the oom_killer and victim's exiting because both have to take
the oom_lock. Therefore the original heuristic to sleep for a short
time in out_of_memory doesn't serve the original purpose.
Moreover Tetsuo has noticed that the short sleep can be more harmful
than actually useful. Hammering the system with many processes can lead
to a starvation when the task holding the oom_lock can block for a long
time (minutes) and block any further progress because the oom_reaper
depends on the oom_lock as well.
Drop the short sleep from out_of_memory when we hold the lock. Keep the
sleep when the trylock fails to throttle the concurrent OOM paths a bit.
This should be solved in a more reasonable way (e.g. sleep proportional
to the time spent in the active reclaiming etc.) but this is much more
complex thing to achieve. This is a quick fixup to remove a stale code.
Link: http://lkml.kernel.org/r/20180709074706.30635-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This passes the information we already have at the call sight into
do_send_sig_info. Ultimately allowing for better handling of signals
sent to a group of processes during fork.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Commit e27be240df ("mm: memcg: make sure memory.events is uptodate
when waking pollers") converted most of memcg event counters to
per-memcg atomics, which made them less confusing for a user. The
"oom_kill" counter remained untouched, so now it behaves differently
than other counters (including "oom"). This adds nothing but confusion.
Let's fix this by adding the MEMCG_OOM_KILL event, and follow the
MEMCG_OOM approach.
This also removes a hack from count_memcg_event_mm(), introduced earlier
specially for the OOM_KILL counter.
[akpm@linux-foundation.org: fix for droppage of memcg-replace-mm-owner-with-mm-memcg.patch]
Link: http://lkml.kernel.org/r/20180508124637.29984-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch renames struct page_counter fields:
count -> usage
limit -> max
and the corresponding functions:
page_counter_limit() -> page_counter_set_max()
mem_cgroup_get_limit() -> mem_cgroup_get_max()
mem_cgroup_resize_limit() -> mem_cgroup_resize_max()
memcg_update_kmem_limit() -> memcg_update_kmem_max()
memcg_update_tcp_limit() -> memcg_update_tcp_max()
The idea behind this renaming is to have the direct matching
between memory cgroup knobs (low, high, max) and page_counters API.
This is pure renaming, this patch doesn't bring any functional change.
Link: http://lkml.kernel.org/r/20180405185921.4942-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since exit_mmap() is done without the protection of mm->mmap_sem, it is
possible for the oom reaper to concurrently operate on an mm until
MMF_OOM_SKIP is set.
This allows munlock_vma_pages_all() to concurrently run while the oom
reaper is operating on a vma. Since munlock_vma_pages_range() depends
on clearing VM_LOCKED from vm_flags before actually doing the munlock to
determine if any other vmas are locking the same memory, the check for
VM_LOCKED in the oom reaper is racy.
This is especially noticeable on architectures such as powerpc where
clearing a huge pmd requires serialize_against_pte_lookup(). If the pmd
is zapped by the oom reaper during follow_page_mask() after the check
for pmd_none() is bypassed, this ends up deferencing a NULL ptl or a
kernel oops.
Fix this by manually freeing all possible memory from the mm before
doing the munlock and then setting MMF_OOM_SKIP. The oom reaper can not
run on the mm anymore so the munlock is safe to do in exit_mmap(). It
also matches the logic that the oom reaper currently uses for
determining when to set MMF_OOM_SKIP itself, so there's no new risk of
excessive oom killing.
This issue fixes CVE-2018-1000200.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1804241526320.238665@chino.kir.corp.google.com
Fixes: 2129258024 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I got "oom_reaper: unable to reap pid:" messages when the victim thread
was blocked inside free_pgtables() (which occurred after returning from
unmap_vmas() and setting MMF_OOM_SKIP). We don't need to complain when
exit_mmap() already set MMF_OOM_SKIP.
Killed process 7558 (a.out) total-vm:4176kB, anon-rss:84kB, file-rss:0kB, shmem-rss:0kB
oom_reaper: unable to reap pid:7558 (a.out)
a.out D13272 7558 6931 0x00100084
Call Trace:
schedule+0x2d/0x80
rwsem_down_write_failed+0x2bb/0x440
call_rwsem_down_write_failed+0x13/0x20
down_write+0x49/0x60
unlink_file_vma+0x28/0x50
free_pgtables+0x36/0x100
exit_mmap+0xbb/0x180
mmput+0x50/0x110
copy_process.part.41+0xb61/0x1fe0
_do_fork+0xe6/0x560
do_syscall_64+0x74/0x230
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Link: http://lkml.kernel.org/r/201803221946.DHG65638.VFJHFtOSQLOMOF@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the 2.6 kernel, the oom killer has slightly biased away from
CAP_SYS_ADMIN processes by discounting some of its memory usage in
comparison to other processes.
This has always been implicit and nothing exactly relies on the
behavior.
Gaurav notices that __task_cred() can dereference a potentially freed
pointer if the task under consideration is exiting because a reference
to the task_struct is not held.
Remove the CAP_SYS_ADMIN bias so that all processes are treated equally.
If any CAP_SYS_ADMIN process would like to be biased against, it is
always allowed to adjust /proc/pid/oom_score_adj.
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803071548510.6996@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This uses the new annotation to determine if an mm has mmu notifiers
with blockable invalidate range callbacks to avoid oom reaping.
Otherwise, the callbacks are used around unmap_page_range().
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141330120.74052@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes has reported the following memory corruption while the
oom reaper tries to unmap the victims address space
BUG: Bad page map in process oom_reaper pte:6353826300000000 pmd:00000000
addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping: (null) index:7f50cab1d
file: (null) fault: (null) mmap: (null) readpage: (null)
CPU: 2 PID: 1001 Comm: oom_reaper
Call Trace:
unmap_page_range+0x1068/0x1130
__oom_reap_task_mm+0xd5/0x16b
oom_reaper+0xff/0x14c
kthread+0xc1/0xe0
Tetsuo Handa has noticed that the synchronization inside exit_mmap is
insufficient. We only synchronize with the oom reaper if
tsk_is_oom_victim which is not true if the final __mmput is called from
a different context than the oom victim exit path. This can trivially
happen from context of any task which has grabbed mm reference (e.g. to
read /proc/<pid>/ file which requires mm etc.).
The race would look like this
oom_reaper oom_victim task
mmget_not_zero
do_exit
mmput
__oom_reap_task_mm mmput
__mmput
exit_mmap
remove_vma
unmap_page_range
Fix this issue by providing a new mm_is_oom_victim() helper which
operates on the mm struct rather than a task. Any context which
operates on a remote mm struct should use this helper in place of
tsk_is_oom_victim. The flag is set in mark_oom_victim and never cleared
so it is stable in the exit_mmap path.
Debugged by Tetsuo Handa.
Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org
Fixes: 2129258024 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tlb_gather_mmu(&tlb, mm, 0, -1) means gathering the whole virtual memory
space. In this case, tlb->fullmm is true. Some archs like arm64
doesn't flush TLB when tlb->fullmm is true:
commit 5a7862e830 ("arm64: tlbflush: avoid flushing when fullmm == 1").
Which causes leaking of tlb entries.
Will clarifies his patch:
"Basically, we tag each address space with an ASID (PCID on x86) which
is resident in the TLB. This means we can elide TLB invalidation when
pulling down a full mm because we won't ever assign that ASID to
another mm without doing TLB invalidation elsewhere (which actually
just nukes the whole TLB).
I think that means that we could potentially not fault on a kernel
uaccess, because we could hit in the TLB"
There could be a window between complete_signal() sending IPI to other
cores and all threads sharing this mm are really kicked off from cores.
In this window, the oom reaper may calls tlb_flush_mmu_tlbonly() to
flush TLB then frees pages. However, due to the above problem, the TLB
entries are not really flushed on arm64. Other threads are possible to
access these pages through TLB entries. Moreover, a copy_to_user() can
also write to these pages without generating page fault, causes
use-after-free bugs.
This patch gathers each vma instead of gathering full vm space. In this
case tlb->fullmm is not true. The behavior of oom reaper become similar
to munmapping before do_exit, which should be safe for all archs.
Link: http://lkml.kernel.org/r/20171107095453.179940-1-wangnan0@huawei.com
Fixes: aac4536355 ("mm, oom: introduce oom reaper")
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Bob Liu <liubo95@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_warn() and dump_header() have to explicitly handle NULL nodemask
which forces both paths to use pr_cont. We can do better. printk
already handles NULL pointers properly so all we need is to teach
nodemask_pr_args to handle NULL nodemask carefully. This allows
simplification of both alloc_warn() and dump_header() and gets rid of
pr_cont altogether.
This patch has been motivated by patch from Joe Perches
http://lkml.kernel.org/r/b31236dfe3fc924054fd7842bde678e71d193638.1509991345.git.joe@perches.com
[akpm@linux-foundation.org: fix tile warning, per Arnd]
Link: http://lkml.kernel.org/r/20171109100531.3cn2hcqnuj7mjaju@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since oom_init() is called before userspace processes start, memory
allocation failure for creating the OOM reaper kernel thread will let
the OOM killer call panic() rather than wake up the OOM reaper.
Link: http://lkml.kernel.org/r/1510137800-4602-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, we account page tables separately for each page table level,
but that's redundant -- we only make use of total memory allocated to
page tables for oom_badness calculation. We also provide the
information to userspace, but it has dubious value there too.
This patch switches page table accounting to single counter.
mm->pgtables_bytes is now used to account all page table levels. We use
bytes, because page table size for different levels of page table tree
may be different.
The change has user-visible effect: we don't have VmPMD and VmPUD
reported in /proc/[pid]/status. Not sure if anybody uses them. (As
alternative, we can always report 0 kB for them.)
OOM-killer report is also slightly changed: we now report pgtables_bytes
instead of nr_ptes, nr_pmd, nr_puds.
Apart from reducing number of counters per-mm, the benefit is that we
now calculate oom_badness() more correctly for machines which have
different size of page tables depending on level or where page tables
are less than a page in size.
The only downside can be debuggability because we do not know which page
table level could leak. But I do not remember many bugs that would be
caught by separate counters so I wouldn't lose sleep over this.
[akpm@linux-foundation.org: fix mm/huge_memory.c]
Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
[kirill.shutemov@linux.intel.com: fix build]
Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jianping Liu