Previous commits released the write lock across quota operations but
missed several places. In particular, the free operations can also
call into the file system code and take the write lock, causing
deadlocks.
This patch introduces some more helpers and uses them for quota call
sites. Without this patch applied, reiserfs + quotas runs into deadlocks
under anything more than trivial load.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
The reiserfs write lock replaced the BKL and uses similar semantics.
Frederic's locking code makes a distinction between when the lock is nested
and when it's being acquired/released, but I don't think that's the right
distinction to make.
The right distinction is between the lock being released at end-of-use and
the lock being released for a schedule. The unlock should return the depth
and the lock should restore it, rather than the other way around as it is now.
This patch implements that and adds a number of places where the lock
should be dropped.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
The reiserfs xattr code doesn't need the write lock and sleeps all over
the place. We can simplify the locking by releasing it and reacquiring
after the xattr call.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Since remove_proc_entry() started to wait for IO in progress (i.e.
since 2007 or so), the locking in fs/reiserfs/proc.c became wrong;
if procfs read happens between the moment when umount() locks the
victim superblock and removal of /proc/fs/reiserfs/<device>/*,
we'll get a deadlock - read will wait for s_umount (in sget(),
called by r_start()), while umount will wait in remove_proc_entry()
for that read to finish, holding s_umount all along.
Fortunately, the same change allows a much simpler race avoidance -
all we need to do is remove the procfs entries in the very beginning
of reiserfs ->kill_sb(); that'll guarantee that pointer to superblock
will remain valid for the duration for procfs IO, so we don't need
sget() to keep the sucker alive. As the matter of fact, we can
get rid of the home-grown iterator completely, and use single_open()
instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Calls into highlevel quota code cannot happen under the write lock. These
calls take dqio_mutex which ranks above write lock. So drop write lock
before calling back into quota code.
CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
Calls into reiserfs journalling code and reiserfs_get_block() need to
be protected with write lock. We remove write lock around calls to high
level quota code in the next patch so these paths would suddently become
unprotected.
CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
In reiserfs_quota_on() we do quite some work - for example unpacking
tail of a quota file. Thus we have to hold write lock until a moment
we call back into the quota code.
CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
When remounting reiserfs dquot_suspend() or dquot_resume() can be called.
These functions take dqonoff_mutex which ranks above write lock so we have
to drop it before calling into quota code.
CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since the moment writes to quota files are using block device page cache and
space for quota structures is reserved at the moment they are first accessed we
have no reason to sync quota before inode writeback. In fact this order is now
only harmful since quota information can easily change during inode writeback
(either because conversion of delayed-allocated extents or simply because of
allocation of new blocks for simple filesystems not using page_mkwrite).
So move syncing of quota information after writeback of inodes into ->sync_fs
method. This way we do not have to use ->quota_sync callback which is primarily
intended for use by quotactl syscall anyway and we get rid of calling
->sync_fs() twice unnecessarily. We skip quota syncing for OCFS2 since it does
proper quota journalling in all cases (unlike ext3, ext4, and reiserfs which
also support legacy non-journalled quotas) and thus there are no dirty quota
structures.
CC: "Theodore Ts'o" <tytso@mit.edu>
CC: Joel Becker <jlbec@evilplan.org>
CC: reiserfs-devel@vger.kernel.org
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Dave Kleikamp <shaggy@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch stops reiserfs using the VFS 'write_super()' method along with the
s_dirt flag, because they are on their way out.
The whole "superblock write-out" VFS infrastructure is served by the
'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and
writes out all dirty superblock using the '->write_super()' call-back. But the
problem with this thread is that it wastes power by waking up the system every
5 seconds, even if there are no diry superblocks, or there are no client
file-systems which would need this (e.g., btrfs does not use
'->write_super()'). So we want to kill it completely and thus, we need to make
file-systems to stop using the '->write_super()' VFS service, and then remove
it together with the kernel thread.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We have the reiserfs superblock pointer in the 'sbi' variable in this
function, no need to use the 'REISERFS_SB(s)' macro which is the same.
This is jut a small clean-up.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't need i_mutex in reiserfs_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
journal_init() doesn't need the lock since no operation on the filesystem
is involved there. journal_read() and get_list_bitmap() have yet to be
reviewed carefully though before removing the lock there. Just keep the
it around these two calls for safety.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the mount path, transactions that are made before journal
initialization don't involve the filesystem. We can delay the reiserfs
lock until we play with the journal.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2/3/4: delete unneeded includes of module.h
ext{3,4}: Fix potential race when setversion ioctl updates inode
udf: Mark LVID buffer as uptodate before marking it dirty
ext3: Don't warn from writepage when readonly inode is spotted after error
jbd: Remove j_barrier mutex
reiserfs: Force inode evictions before umount to avoid crash
reiserfs: Fix quota mount option parsing
udf: Treat symlink component of type 2 as /
udf: Fix deadlock when converting file from in-ICB one to normal one
udf: Cleanup calling convention of inode_getblk()
ext2: Fix error handling on inode bitmap corruption
ext3: Fix error handling on inode bitmap corruption
ext3: replace ll_rw_block with other functions
ext3: NULL dereference in ext3_evict_inode()
jbd: clear revoked flag on buffers before a new transaction started
ext3: call ext3_mark_recovery_complete() when recovery is really needed
This patch fixes a crash in reiserfs_delete_xattrs during umount.
When shrink_dcache_for_umount clears the dcache from
generic_shutdown_super, delayed evictions are forced to disk. If an
evicted inode has extended attributes associated with it, it will
need to walk the xattr tree to locate and remove them.
But since shrink_dcache_for_umount will BUG if it encounters active
dentries, the xattr tree must be released before it's called or it will
crash during every umount.
This patch forces the evictions to occur before generic_shutdown_super
by calling shrink_dcache_sb first. The additional evictions caused
by the removal of each associated xattr file and dir will be automatically
handled as they're added to the LRU list.
CC: reiserfs-devel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When jqfmt mount option is not specified on remount, we mistakenly clear
s_jquota_fmt value stored in superblock. Fix the problem.
CC: stable@kernel.org
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Make reiserfs properly display mount options in /proc/mounts.
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change the default reiserfs mount option to barrier=flush. Based on a patch
from Jeff Mahoney in the SuSE tree.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.
This is just the prototype change with no user for it yet. I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.
Also remove incorrect comments that ->dirty_inode can't block. That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl
is prone to deadlocks. We hold s_umount semaphore for reading during the
path resolution and resolution itself may need to acquire the semaphore
for writing when e. g. autofs mountpoint is passed.
Solve the problem by performing the resolution before we get hold of the
superblock (and thus s_umount semaphore). The whole thing is complicated
by the fact that some filesystems (OCFS2) ignore the path argument. So to
distinguish between filesystem which want the path and which do not we
introduce new .quota_on_meta callback which does not get the path. OCFS2
then uses this callback instead of old .quota_on.
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christoph Hellwig <hch@lst.de>
CC: Ted Ts'o <tytso@mit.edu>
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
a) count file openers correctly; i_count use was completely wrong
b) use new mutex for exclusion between final close/open/truncate,
to protect tailpacking logics. i_mutex use was wrong and resulted
in deadlocks.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When quota was suspended on remount-ro, finish_unfinished() will try to turn
it on again (which fails) and also turns the quotas off on exit. Fix the
function to check whether quotas are already on at function entry and do
not turn them off in that case.
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Remount handling has fully moved into the filesystem, so all this is
superflous now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw. Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself. This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 8ebc423238 (reiserfs: kill-the-BKL)
introduced a bug in the mount failure case.
The error label releases the lock before calling journal_release_error,
but it requires that the lock be held. do_journal_release unlocks and
retakes it. When it releases it without it held, we trigger a BUG().
The error_alloc label skips the unlock since the lock isn't held yet
but none of the other conditions that are clean up exist yet either.
This patch returns immediately after the kzalloc failure and moves
the reiserfs_write_unlock after the journal_release_error call.
This was reported in https://bugzilla.novell.com/show_bug.cgi?id=591807
Reported-by: Thomas Siedentopf <thomas.siedentopf@novell.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Thomas Siedentopf <thomas.siedentopf@novell.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: 2.6.33.x <stable@kernel.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently clear_inode calls vfs_dq_drop directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.
Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.
Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not. Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
/proc/fs/reiserfs/version is on the way of removing ->read_proc interface.
It's empty however, so simply remove it instead of doing dummy
conversion. It's hard to see what information userspace can extract from
empty file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: (31 commits)
kill-the-bkl/reiserfs: turn GFP_ATOMIC flag to GFP_NOFS in reiserfs_get_block()
kill-the-bkl/reiserfs: drop the fs race watchdog from _get_block_create_0()
kill-the-bkl/reiserfs: definitely drop the bkl from reiserfs_ioctl()
kill-the-bkl/reiserfs: always lock the ioctl path
kill-the-bkl/reiserfs: fix reiserfs lock to cpu_add_remove_lock dependency
kill-the-bkl/reiserfs: Fix induced mm->mmap_sem to sysfs_mutex dependency
kill-the-bkl/reiserfs: panic in case of lock imbalance
kill-the-bkl/reiserfs: fix recursive reiserfs write lock in reiserfs_commit_write()
kill-the-bkl/reiserfs: fix recursive reiserfs lock in reiserfs_mkdir()
kill-the-bkl/reiserfs: fix "reiserfs lock" / "inode mutex" lock inversion dependency
kill-the-bkl/reiserfs: move the concurrent tree accesses checks per superblock
kill-the-bkl/reiserfs: acquire the inode mutex safely
kill-the-bkl/reiserfs: unlock only when needed in search_by_key
kill-the-bkl/reiserfs: use mutex_lock in reiserfs_mutex_lock_safe
kill-the-bkl/reiserfs: factorize the locking in reiserfs_write_end()
kill-the-bkl/reiserfs: reduce number of contentions in search_by_key()
kill-the-bkl/reiserfs: don't hold the write recursively in reiserfs_lookup()
kill-the-bkl/reiserfs: lock only once on reiserfs_get_block()
kill-the-bkl/reiserfs: conditionaly release the write lock on fs_changed()
kill-the-BKL/reiserfs: add reiserfs_cond_resched()
...
Impact: fix a deadlock
reiserfs_dirty_inode() is the super_operations::dirty_inode() callback
of reiserfs. It can be called from different contexts where the write
lock can be already held.
But this function also grab the write lock (possibly recursively).
Subsequent release of the lock before sleep will actually not release
the lock if the caller of mark_inode_dirty() (which in turn calls
reiserfs_dirty_inode()) already owns the lock.
A typical case:
reiserfs_write_end() {
acquire_write_lock()
mark_inode_dirty() {
reiserfs_dirty_inode() {
reacquire_write_lock() {
journal_begin() {
do_journal_begin_r() {
/*
* fail to release, still
* one depth of lock
*/
release_write_lock()
reiserfs_wait_on_write_block() {
wait_event()
The event is usually provided by something which needs the write lock but
it hasn't been released.
We use reiserfs_write_lock_once() here to ensure we only grab the
write lock in one level.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@texware.it>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
LKML-Reference: <1239680065-25013-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is an attempt to remove the Bkl based locking scheme from
reiserfs and is intended.
It is a bit inspired from an old attempt by Peter Zijlstra:
http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html
The bkl is heavily used in this filesystem to prevent from
concurrent write accesses on the filesystem.
Reiserfs makes a deep use of the specific properties of the Bkl:
- It can be acqquired recursively by a same task
- It is released on the schedule() calls and reacquired when schedule() returns
The two properties above are a roadmap for the reiserfs write locking so it's
very hard to simply replace it with a common mutex.
- We need a recursive-able locking unless we want to restructure several blocks
of the code.
- We need to identify the sites where the bkl was implictly relaxed
(schedule, wait, sync, etc...) so that we can in turn release and
reacquire our new lock explicitly.
Such implicit releases of the lock are often required to let other
resources producer/consumer do their job or we can suffer unexpected
starvations or deadlocks.
So the new lock that replaces the bkl here is a per superblock mutex with a
specific property: it can be acquired recursively by a same task, like the
bkl.
For such purpose, we integrate a lock owner and a lock depth field on the
superblock information structure.
The first axis on this patch is to turn reiserfs_write_(un)lock() function
into a wrapper to manage this mutex. Also some explicit calls to
lock_kernel() have been converted to reiserfs_write_lock() helpers.
The second axis is to find the important blocking sites (schedule...(),
wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit
release of the write lock on these locations before blocking. Then we can
safely wait for those who can give us resources or those who need some.
Typically this is a fight between the current writer, the reiserfs workqueue
(aka the async commiter) and the pdflush threads.
The third axis is a consequence of the second. The write lock is usually
on top of a lock dependency chain which can include the journal lock, the
flush lock or the commit lock. So it's dangerous to release and trying to
reacquire the write lock while we still hold other locks.
This is fine with the bkl:
T1 T2
lock_kernel()
mutex_lock(A)
unlock_kernel()
// do something
lock_kernel()
mutex_lock(A) -> already locked by T1
schedule() (and then unlock_kernel())
lock_kernel()
mutex_unlock(A)
....
This is not fine with a mutex:
T1 T2
mutex_lock(write)
mutex_lock(A)
mutex_unlock(write)
// do something
mutex_lock(write)
mutex_lock(A) -> already locked by T1
schedule()
mutex_lock(write) -> already locked by T2
deadlock
The solution in this patch is to provide a helper which releases the write
lock and sleep a bit if we can't lock a mutex that depend on it. It's another
simulation of the bkl behaviour.
The last axis is to locate the fs callbacks that are called with the bkl held,
according to Documentation/filesystem/Locking.
Those are:
- reiserfs_remount
- reiserfs_fill_super
- reiserfs_put_super
Reiserfs didn't need to explicitly lock because of the context of these callbacks.
But now we must take care of that with the new locking.
After this patch, reiserfs suffers from a slight performance regression (for now).
On UP, a high volume write with dd reports an average of 27 MB/s instead
of 30 MB/s without the patch applied.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Bron Gondwana <brong@fastmail.fm>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix various silly problems wrt mnt_namespace.h:
- exit_mnt_ns() isn't used, remove it
- done that, sched.h and nsproxy.h inclusions aren't needed
- mount.h inclusion was need for vfsmount_lock, but no longer
- remove mnt_namespace.h inclusion from files which don't use anything
from mnt_namespace.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure a superblock really is writeable by checking MS_RDONLY
under s_umount. sync_filesystems needed some re-arragement for
that, but all but one sync_filesystem caller had the correct locking
already so that we could add that check there. cachefiles grew
s_umount locking.
I've also added a WARN_ON to sync_filesystem to assert this for
future callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.
Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.
Exceptions:
- affs already has identical copy & pasted code at the beginning of
affs_put_super so no need to do it twice.
- xfs does the right thing without it and I have changes pending for
the xfs tree touching this are so I don't really need conflicts
here..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds an -oexpose_privroot option to allow access to the privroot.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This avoids an Oops in open_xa_root that can occur when deleting a file
with xattrs disabled. It assumes that the xattr root will be there, and
that is not guaranteed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Put generic_show_options read access to s_options under rcu_read_lock,
split save_mount_options() into "we are setting it the first time"
(uses in foo_fill_super()) and "we are relacing and freeing the old one",
synchronize_rcu() before kfree() in the latter.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... even if it's a negative dentry. That way we can set ->d_op on
root before anyone could race with us. Simplify d_compare(), while
we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make reiserfs3 return f_fsid info for statfs(2). By Andreas' suggestion,
this patch populates a persistent f_fsid between boots/mounts with help of
on-disk uuid record.
Randy Dunlap reported a compiling error from v2 patch like:
fs/built-in.o: In function `reiserfs_statfs':
super.c:(.text+0x7332b): undefined reference to `crc32_le'
super.c:(.text+0x7333f): undefined reference to `crc32_le'
Also he provided helpful solution to fix this error. The modification of v3
patch is based on Randy's suggestion, add 'select CRC32' in fs/reiserfs/Kconfig.
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch strips trailing whitespace from the reiserfs code.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig had asked me quite some time ago to port the reiserfs
xattrs to the generic xattr interface.
This patch replaces the reiserfs-specific xattr handling code with the
generic struct xattr_handler.
However, since reiserfs doesn't split the prefix and name when accessing
xattrs, it can't leverage generic_{set,get,list,remove}xattr without
needlessly reconstructing the name on the back end.
Update 7/26/07: Added missing dput() to deletion path.
Update 8/30/07: Added missing mark_inode_dirty when i_mode is used to
represent an ACL and no previous ACL existed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the switch to using inode->i_mutex locking during lookups/creation
in the xattr root, the per-super xattr lock is no longer needed.
This patch removes it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes many paths that are currently using warnings to handle
the error.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ReiserFS warnings can be somewhat inconsistent.
In some cases:
* a unique identifier may be associated with it
* the function name may be included
* the device may be printed separately
This patch aims to make warnings more consistent. reiserfs_warning() prints
the device name, so printing it a second time is not required. The function
name for a warning is always helpful in debugging, so it is now automatically
inserted into the output. Hans has stated that every warning should have
a unique identifier. Some cases lack them, others really shouldn't have them.
reiserfs_warning() now expects an id associated with each message. In the
rare case where one isn't needed, "" will suffice.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In several places, reiserfs_warning is used when there is no warning, just
a notice. This patch changes some of them to indicate that the message
is merely informational.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following patch adds the fields for tracking mount counts and last
fsck timestamps to the superblock. It also increments the mount count
on every read-write mount.
Reiserfsprogs 3.6.21 added support for these fields.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, ext3 in mainline Linux doesn't have the freeze feature which
suspends write requests. So, we cannot take a backup which keeps the
filesystem's consistency with the storage device's features (snapshot and
replication) while it is mounted.
In many case, a commercial filesystem (e.g. VxFS) has the freeze feature
and it would be used to get the consistent backup.
If Linux's standard filesystem ext3 has the freeze feature, we can do it
without a commercial filesystem.
So I have implemented the ioctls of the freeze feature.
I think we can take the consistent backup with the following steps.
1. Freeze the filesystem with the freeze ioctl.
2. Separate the replication volume or create the snapshot
with the storage device's feature.
3. Unfreeze the filesystem with the unfreeze ioctl.
4. Take the backup from the separated replication volume
or the snapshot.
This patch:
VFS:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they can return an error.
Rename write_super_lockfs and unlockfs of the super block operation
freeze_fs and unfreeze_fs to avoid a confusion.
ext3, ext4, xfs, gfs2, jfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that write_super_lockfs returns an error if needed,
and unlockfs always returns 0.
reiserfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they always return 0 (success) to keep a current behavior.
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
checks based on it are switched to vfs_quota_on_path(); that way we
avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move declarations of some macros, which should be in fact functions to
quotaops.h. This way they can be later converted to inline functions
because we can now use declarations from quota.h. Also add necessary
includes of quotaops.h to a few files.
[akpm@linux-foundation.org: fix JFS build]
[akpm@linux-foundation.org: fix UFS build]
[vegard.nossum@gmail.com: fix QUOTA=n build]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Arjen Pool <arjenpool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not allow user to change quota mount options when quota is just
suspended. It would make mount options and internal quota state inconsistent.
Also we should not allow user to change quota format when quota is turned on.
On the other hand we can just silently ignore when some option is set to the
value it already has (some mount versions do this on remount). Finally, we
should not discard current quota options if parsing of mount options fails.
Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In journal=data mode, it is not enough to do write_inode_now() as done in
vfs_quota_on() to write all data to their final location (which is needed for
quota_read to work correctly). Calling journal_end_sync() before calling
vfs_quota_on() does it's job because transactions are committed to the journal
and data marked as dirty in memory so write_inode_now() writes them to their
final locations.
Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When write in reiserfs_quota_write() fails, we have to properly release
i_mutex. One error path has been missing the unlock...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quota files cannot have tails because quota_write and quota_read functions do
not support them. So far when quota files did have tail, we just refused to
turn quotas on it. Sadly this check has been wrong and so there are now
plenty installations where quota files don't have NOTAIL flag set and so now
after fixing the check, they suddently fail to turn quotas on. Since it's
easy to unpack the tail from kernel, do this from reiserfs_quota_on() which
solves the problem and is generally nicer to users anyway.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: <urhausen@urifabi.net>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call dquot_drop() from reiserfs_dquot_drop() even if we fail to start a
transaction. Otherwise we never get to dropping references to quota
structures from the inode and umount will hang indefinitely.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update reiserfs to handle quotaon on remount RW.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanups in quota code:
Change __inline__ to inline.
Change some macros to inline functions.
Remove vfs_quota_off_mount() macro.
DQUOT_OFF() should be (0) is CONFIG_QUOTA is disabled.
Move declaration of mark_dquot_dirty and dirty_dquot from quota.h to dquot.c
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit e6bafba5b4 ("wmi: (!x & y)
strikes again"), a bug was fixed that involved converting !x & y to !(x
& y). The code below shows the same pattern, and thus should perhaps be
fixed in the same way.
This is not tested and clearly changes the semantics, so it is only
something to consider.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E1,E2; @@
(
!E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a .show_options super operation to reiserfs.
Use generic_show_options() and save the complete option string in
reiserfs_fill_super() and reiserfs_remount().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney