'__vmalloc_start_set' currently only gets set in initmem_init() when
!CONFIG_NEED_MULTIPLE_NODES. This breaks detection of vmalloc address
with virt_addr_valid() with CONFIG_NEED_MULTIPLE_NODES=y, causing
a kernel crash:
[mm/usercopy] 517e1fbeb6: kernel BUG at arch/x86/mm/physaddr.c:78!
Set '__vmalloc_start_set' appropriately for that case as well.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dc16ecf7fd ("x86-32: use specific __vmalloc_start_set flag in __virt_addr_valid")
Link: http://lkml.kernel.org/r/1494278596-30373-1-git-send-email-labbott@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.
Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace accordingly where needed.
Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-3-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With DISCONTIGMEM, the mapping between a pfn and its owning node is
initialized using data provided by the BIOS. However, the initialization
may fail if the extents are not aligned to section boundary (64M).
The symptom of this bug is an early boot failure in pfn_to_page(),
as it tries to access NODE_DATA(__nid) using index from an unitialized
element of the physnode_map[] array.
While the bug is always present, it is more likely to be hit in kdump
kernels on large machines, because:
1. The memory map for a kdump kernel is specified as exactmap, and
exactmap is more likely to be unaligned.
2. Large reservations are more likely to span across a 64M boundary.
[ hpa: fixed incorrect use of "pfn" instead of "start" ]
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Link: http://lkml.kernel.org/r/20140201133019.32e56f86@hananiah.suse.cz
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This code was an optimization for 32-bit NUMA systems.
It has probably been the cause of a number of subtle bugs over
the years, although the conditions to excite them would have
been hard to trigger. Essentially, we remap part of the kernel
linear mapping area, and then sometimes part of that area gets
freed back in to the bootmem allocator. If those pages get
used by kernel data structures (say mem_map[] or a dentry),
there's no big deal. But, if anyone ever tried to use the
linear mapping for these pages _and_ cared about their physical
address, bad things happen.
For instance, say you passed __GFP_ZERO to the page allocator
and then happened to get handed one of these pages, it zero the
remapped page, but it would make a pte to the _old_ page.
There are probably a hundred other ways that it could screw
with things.
We don't need to hang on to performance optimizations for
these old boxes any more. All my 32-bit NUMA systems are long
dead and buried, and I probably had access to more than most
people.
This code is causing real things to break today:
https://lkml.org/lkml/2013/1/9/376
I looked in to actually fixing this, but it requires surgery
to way too much brittle code, as well as stuff like
per_cpu_ptr_to_phys().
[ hpa: Cc: this for -stable, since it is a memory corruption issue.
However, an alternative is to simply mark NUMA as depends BROKEN
rather than EXPERIMENTAL in the X86_32 subclause... ]
Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Other than sanity check and debug message, the x86 specific version of
memblock reserve/free functions are simple wrappers around the generic
versions - memblock_reserve/free().
This patch adds debug messages with caller identification to the
generic versions and replaces x86 specific ones and kills them.
arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
after this change and removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
25818f0f28 (memblock: Make MEMBLOCK_ERROR be 0) thankfully made
MEMBLOCK_ERROR 0 and there already are codes which expect error return
to be 0. There's no point in keeping MEMBLOCK_ERROR around. End its
misery.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310457490-3356-6-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
DISCONTIGMEM on x86-32 implements pfn -> nid mapping similarly to
SPARSEMEM; however, it calls each mapping unit ELEMENT instead of
SECTION. This patch renames it to SECTION so that PAGES_PER_SECTION
is valid for both DISCONTIGMEM and SPARSEMEM. This will be used by
the next patch to implement mapping granularity check.
This patch is trivial constant rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074422.GA2872@htj.dyndns.org
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With both _numa_init() methods converted and the rest of init code
adjusted, numa_32.c now can switch from the 32bit only init code to
the common one in numa.c.
* Shim get_memcfg_*()'s are dropped and initmem_init() calls
x86_numa_init(), which is updated to handle NUMAQ.
* All boilerplate operations including node range limiting, pgdat
alloc/init are handled by numa_init(). 32bit only implementation is
removed.
* 32bit numa_add_memblk(), numa_set_distance() and
memory_add_physaddr_to_nid() removed and common versions in
numa_32.c enabled for 32bit.
This change causes the following behavior changes.
* NODE_DATA()->node_start_pfn/node_spanned_pages properly initialized
for 32bit too.
* Much more sanity checks and configuration cleanups.
* Proper handling of node distances.
* The same NUMA init messages as 64bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
setup_node_bootmem() is taken from 64bit and doesn't use remap
allocator. It's about to be shared with 32bit so add support for it.
If NODE_DATA is remapped, it's noted in the debug message and node
locality check is skipped as the __pa() of the remapped address
doesn't reflect the actual physical address.
On 64bit, remap allocator becomes noop and doesn't affect the
behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Instead of dereferencing node_start/end_pfn[] directly, make
init_alloc_remap() take @start and @end and let the caller be
responsible for making sure the range is sane. This is to prepare for
use from unified NUMA init code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Generic NUMA init code was moved to numa.c from numa_64.c but is still
guaraded by CONFIG_X86_64. This patch removes the compile guard and
enables compiling on 32bit.
* numa_add_memblk() and numa_set_distance() clash with the shim
implementation in numa_32.c and are left out.
* memory_add_physaddr_to_nid() clashes with 32bit implementation and
is left out.
* MAX_DMA_PFN definition in dma.h moved out of !CONFIG_X86_32.
* node_data definition in numa_32.c removed in favor of the one in
numa.c.
There are places where ulong is assumed to be 64bit. The next patch
will fix them up. Note that although the code is compiled it isn't
used yet and this patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Update numaq such that it calls numa_add_memblk() and sets
numa_nodes_parsed instead of directly diddling with NUMA states. The
original get_memcfg_numaq() is renamed to numaq_numa_init() and new
get_memcfg_numaq() is created in numa_32.c.
The shim numa_add_memblk() implementation handles node_start/end_pfn[]
and node_set_online() for nodes with memory. The new
get_memcfg_numaq() exactly the same with get_memcfg_from_srat() other
than calling the numaq init function. Things get_memcfgs_numaq() do
are not strictly necessary for numaq but added for consistency and to
help unifying NUMA init handling.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
SRAT support implementation in srat_32.c and srat.c are generally
similar; however, there are some differences.
First of all, 64bit implementation supports more types of SRAT
entries. 64bit supports x2apic, affinity, memory and SLIT. 32bit
only supports processor and memory.
Most other differences stem from different initialization protocols
employed by 64bit and 32bit NUMA init paths.
On 64bit,
* Mappings among PXM, node and apicid are directly done in each SRAT
entry callback.
* Memory affinity information is passed to numa_add_memblk() which
takes care of all interfacing with NUMA init.
* Doesn't directly initialize NUMA configurations. All the
information is recorded in numa_nodes_parsed and memblks.
On 32bit,
* Checks numa_off.
* Things go through one more level of indirection via private tables
but eventually end up initializing the same mappings.
* node_start/end_pfn[] are initialized and
memblock_x86_register_active_regions() is called for each memory
chunk.
* node_set_online() is called for each online node.
* sort_node_map() is called.
There are also other minor differences in sanity checking and messages
but taking 64bit version should be good enough.
This patch drops the 32bit specific implementation and makes the 64bit
implementation common for both 32 and 64bit.
The init protocol differences are dealt with in two places - the
numa_add_memblk() shim added in the previous patch and new temporary
numa_32.c:get_memcfg_from_srat() which wraps invocation of
x86_acpi_numa_init().
The shim numa_add_memblk() handles the folowings.
* node_start/end_pfn[] initialization.
* node_set_online() for memory nodes.
* Invocation of memblock_x86_register_active_regions().
The shim get_memcfg_from_srat() handles the followings.
* numa_off check.
* node_set_online() for CPU nodes.
* sort_node_map() invocation.
* Clearing of numa_nodes_parsed and active_ranges on failure.
The shims are temporary and will be removed as the generic NUMA init
path in 32bit is replaced with 64bit one.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
To help transition to common NUMA init, implement temporary 32bit
shims for numa_add_memblk() and numa_set_distance().
numa_add_memblk() registers the memblk and adjusts
node_start/end_pfn[]. numa_set_distance() is noop.
These shims will allow using 64bit NUMA init functions on 32bit and
gradual transition to common NUMA init path.
For detailed description, please read description of commits which
make use of the shim functions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
There's no reason get_memcfg_numa() to be implemented inline in
mmzone_32.h. Move it to numa_32.c and also make
get_memcfg_numa_flag() static.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Instead of calling memory_present() for each region from NUMA init,
call sparse_memory_present_with_active_regions() from paging_init()
similarly to x86-64.
For flat and numaq, this results in exactly the same memory_present()
calls. For srat, if there are multiple memory chunks for a node,
after this change, memory_present() will be called separately for each
chunk instead of being called once to encompass the whole range, which
doesn't cause any harm and actually is the better behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Currently, the only meaningful user of apic->x86_32_numa_cpu_node() is
NUMAQ which returns valid mapping only after CPU is initialized during
SMP bringup; thus, the previous patch to set apicid -> node in
setup_local_APIC() makes __apicid_to_node[] always contain the correct
mapping whether custom apic->x86_32_numa_cpu_node() is used or not.
So, there is no reason to keep separate 32bit implementation. We can
always consult __apicid_to_node[]. Move 64bit implementation from
numa_64.c to numa.c and remove 32bit implementation from numa_32.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Now that remap allocator is cleaned up, update comments such that they
are in docbook function description format and reflect the actual
implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-15-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap area size can be determined from node_remap_start_vaddr[] and
node_remap_end_vaddr[] making node_remap_size[] redundant. Remove it.
While at it, make resume_map_numa_kva() use @nr_pages for number of
pages instead of @size.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-14-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
With lowmem address reservation moved into init_alloc_remap(),
node_remap_offset[] is no longer useful. Remove it and related offset
handling code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-13-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
pgdat allocation is handled differnetly from other remap allocations -
it's reserved during initialization. There's no reason to handle this
any differnetly. Remap allocator is initialized for every node and if
init failed the allocation will fail and pgdat allocation can fall
back to generic code like anyone else.
Remove special init-time pgdat reservation and make allocate_pgdat()
use alloc_remap() like everyone else.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-12-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There's no reason to perform the actual remapping separately.
Collapse remap_numa_kva() into init_alloc_remap() and, while at it,
make it less verbose.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-11-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap alloc init is done in the following stages.
1. init_alloc_remap() calculates how much memory is necessary for each
node and reserves node local memory.
2. initmem_init() collects how much each node needs and reserves a
single contiguous lowmem area which can contain all.
3. init_remap_allocator() initializes allocator parameters from the
determined lowmem address and per-node offsets.
4. Actual remap happens.
There is no reason for the lowmem remap area to be reserved as a
single contiguous area at one go. They don't interact with each other
and the memblock allocator will put them side-by-side anyway.
This patch breaks up the single lowmem address reservation and put
per-node lowmem address reservation into init_alloc_remap() and
initializes allocator parameters directly in the function as all the
addresses are determined there. This merges steps 2 and 3 into 1.
While at it, remove now largely irrelevant comments in
init_alloc_remap().
This change causes the following behavior changes.
* Remap lowmem areas are allocated in smaller per-node chunks.
* Remap lowmem area reservation failure fail future remap allocations
instead of panicking.
* Remap allocator initialization is less verbose.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap allocator failure isn't fatal. The callers are required to fall
back to regular early memory allocation mechanisms on failure anyway,
so there's no reason to panic on remap init failure. Whining and
returning are enough.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-9-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Only pgdat and memmap use remap area and there isn't much benefit in
allowing per-node override. In addition, the use of node_remap_size[]
is confusing in that it contains number of bytes before remap
initialization and then number of pages afterwards.
Move remap size calculation for memap from specific NUMA config
implementations to init_alloc_remap() and make node_remap_size[]
static.
The only behavior difference is that, before this patch, numaq_32
didn't consider max_pfn when calculating the memmap size but it's
enforced after this patch, which is the right thing to do.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-8-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
@size variable in init_alloc_remap() is confusing in that it starts as
number of bytes as its name implies and then becomes number of pages.
Make it consistently represent bytes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-7-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
init_alloc_remap() is about to do more and using _kva suffix for
physical address becomes confusing because the function will be
handling both physical and virtual addresses. Rename @node_kva to
@node_pa.
This is trivial rename and doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-6-git-send-email-tj@kernel.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Separate the outer node walking loop and per-node logic from
calculate_numa_remap_pages(). The outer loop is collapsed into
initmem_init() and the per-node logic is moved into a new function -
init_alloc_remap().
The new function name is confusing with the existing
init_remap_allocator() and the behavior is the function isn't very
clean either at this point, but this is to prepare for further
cleanups and it will become prettier.
This function doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-5-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
memblock_find_in_range() now does top-down allocation by default, so
there's no reason for its callers to explicitly implement it by
gradually lowering the start address.
Remove redundant top-down allocation logic from init_meminit() and
calculate_numa_remap_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-4-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When pgdat is reserved in init_remap_allocator(), PAGE_SIZE aligned
size will be used. Match the size alignment in initialization to
avoid allocation failure down the road.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-3-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
node_remap_{start|end}_vaddr[] describe [start, end) ranges; however,
alloc_remap() incorrectly failed when the current allocation + size
equaled the end but it should fail only when it goes over. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-2-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There's no reason for these to live in setup_arch(). Move them inside
initmem_init().
- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
Fixed. Found by Ankita.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
initmem_init() extensively accesses and modifies global data
structures and the parameters aren't even followed depending on which
path is being used. Drop @start/last_pfn and let it deal with
@max_pfn directly. This is in preparation for further NUMA init
cleanups.
- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
Fixed. Found by Yinghai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Now that everything else is unified, NUMA initialization can be
unified too.
* numa_init_array() and init_cpu_to_node() are moved from
numa_64 to numa.
* numa_32::initmem_init() is updated to call numa_init_array()
and setup_arch() to call init_cpu_to_node() on 32bit too.
* x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on
32bit too. This is safe now as numa_init_array() will initialize
it early during boot.
This makes NUMA mapping fully initialized before
setup_per_cpu_areas() on 32bit too and thus makes the first
percpu chunk which contains all the static variables and some of
dynamic area allocated with NUMA affinity correctly considered.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.
This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node(). On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.
srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology. Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change. The comment is reformatted and
updated to note the ugliness.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.
However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x
So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.
In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions(). Also we don't need to
remove "KVA RAM" from active ranges.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Requested by Ingo, Thomas and HPA.
The old bootmem code is no longer necessary, and the transition is
complete. Remove it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly
-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Let's make 32bit consistent with 64bit.
-v2: Andrew pointed out for 32bit that we should use -1ULL
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-25-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
To eventually interleave emulated nodes over physical nodes, we
need to know the physical topology of the machine without actually
registering it. This does the k8 node setup in two parts:
detection and registration. NUMA emulation can then used the
physical topology detected to setup the address ranges of emulated
nodes accordingly. If emulation isn't used, the k8 nodes are
registered as normal.
Two formals are added to the x86 NUMA setup functions: `acpi' and
`k8'. These represent whether ACPI or K8 NUMA has been detected;
both cannot be true at the same time. This specifies to the NUMA
emulation code whether an underlying physical NUMA topology exists
and which interface to use.
This patch deals solely with separating the k8 setup path into
Northbridge detection and registration steps and leaves the ACPI
changes for a subsequent patch. The `acpi' formal is added here,
however, to avoid touching all the header files again in the next
patch.
This approach also ensures emulated nodes will not span physical
nodes so the true memory latency is not misrepresented.
k8_get_nodes() may now be used to export the k8 physical topology
of the machine for NUMA emulation.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
calculate_numa_remap_pages() is called only by __init initmem_init()
further calculate_numa_remap_pages is calling:
__init find_e820_area() and __init reserve_early()
So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages().
WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area()
The function calculate_numa_remap_pages() references
the function __init find_e820_area().
This is often because calculate_numa_remap_pages lacks a __init
annotation or the annotation of find_e820_area is wrong.
WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early()
The function calculate_numa_remap_pages() references
the function __init reserve_early().
This is often because calculate_numa_remap_pages lacks a __init
annotation or the annotation of reserve_early is wrong.
[ Impact: save memory, address Section mismatch warning ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1239991281.3153.4.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix panic on system 2g x4 sockets
Found one system with 4 sockets and every sockets has 2g can not boot
with numa32 because boot mem is crossing nodes.
So try to have numa version of setup_bootmem_allocator().
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49AE485B.8000902@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch moves set_highmem_pages_init() to arch/x86/mm/highmem_32.c.
The declaration of the function is kept in asm/numa_32.h because
asm/highmem.h is included only if CONFIG_HIGHMEM is enabled so we
can't put the empty static inline function there.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236082212.2675.24.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix this sparse warning:
arch/x86/mm/numa_32.c:197:24: warning: Using plain integer as NULL pointer
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crash during hibernation on 32-bit NUMA
The NUMA code on x86_32 creates special memory mapping that allows
each node's pgdat to be located in this node's memory. For this
purpose it allocates a memory area at the end of each node's memory
and maps this area so that it is accessible with virtual addresses
belonging to low memory. As a result, if there is high memory,
these NUMA-allocated areas are physically located in high memory,
although they are mapped to low memory addresses.
Our hibernation code does not take that into account and for this
reason hibernation fails on all x86_32 systems with CONFIG_NUMA=y and
with high memory present. Fix this by adding a special mapping for
the NUMA-allocated memory areas to the temporary page tables created
during the last phase of resume.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Laura Abbott