net/sunrpc/xprtrdma/frwr_ops.c:151:32: warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
trace_xprtrdma_frwr_alloc(mr, rc);
^~
net/sunrpc/xprtrdma/frwr_ops.c:127:8: note: initialize the variable 'rc' to silence this warning
int rc;
^
= 0
1 warning generated.
The tracepoint is intended to record the error returned from
ib_alloc_mr(). In the current code there is no other purpose for
@rc, so simply replace it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d8cf39a280c3b0 ('xprtrdma: MR-related memory allocation should be allowed to fail')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma always drives a retry of MR allocation if it should fail.
It should be safe to not use GFP_KERNEL for this purpose rather
than sleeping in the memory allocator.
In theory, if these weaker allocations are attempted first, memory
exhaustion is likely to cause xprtrdma to fail fast and not then
invoke the RDMA core APIs, which still might use GFP_KERNEL.
Also note that rpc_task_gfp_mask() always sets __GFP_NORETRY and
__GFP_NOWARN when an RPC-related allocation is being done in a
worker thread. MR allocation is already always done in worker
threads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Deprecated. dprintk is no longer used in xprtrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This minor fix-up keeps GCC from complaining that "last' may be used
uninitialized", which breaks some build workflows that have been running
with all warnings treated as errors.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is a buffer to be left persistently registered while a
connection is up. Connection tear-down will automatically DMA-unmap,
invalidate, and dereg the MR. A persistently registered buffer is
lower in cost to provide, and it can never be coalesced into the
RDMA segment that carries the data payload.
An RPC that provisions a Write chunk with a non-aligned length now
uses this MR rather than the tail buffer of the RPC's rq_rcv_buf.
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Unlike xprtrdma_post_send(), this one can be left enabled all the
time, and should almost never fire. But we do want to know about
immediate errors when they happen.
Note that there is already a similar post_linv_err tracepoint.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
ib_post_send() does not disconnect the QP when it returns an
immediate error. Thus, the code that posts LocalInv has to
explicitly disconnect after an immediate error. This is just
like the frwr_send() callers handle it.
If a disconnect isn't done here, the transport deadlocks.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The normal mechanism that invalidates and unmaps MRs is
frwr_unmap_async(). frwr_unmap_sync() is used only when an RPC
Reply bearing Write or Reply chunks has been lost (ie, almost
never).
Coverity found that after commit 9a301cafc8 ("xprtrdma: Move
fr_linv_done field to struct rpcrdma_mr"), the while() loop in
frwr_unmap_sync() exits only once @mr is NULL, unconditionally
causing subsequent dereferences of @mr to Oops.
I've tested this fix by creating a client that skips invoking
frwr_unmap_async() when RPC Replies complete. That forces all
invalidation tasks to fall upon frwr_unmap_sync(). Simple workloads
with this fix applied to the adulterated client work as designed.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1504556 ("Null pointer dereferences")
Fixes: 9a301cafc8 ("xprtrdma: Move fr_linv_done field to struct rpcrdma_mr")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: The last remaining field in struct rpcrdma_frwr has been
removed, so the struct can be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: Move more of struct rpcrdma_frwr into its parent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up.
- Simplify variable initialization in the completion handlers.
- Move another field out of struct rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up (for several purposes):
- The MR's cid is initialized sooner so that tracepoints can show
something reasonable even if the MR is never posted.
- The MR's res.id doesn't change so the cid won't change either.
Initializing the cid once is sufficient.
- struct rpcrdma_frwr is going away soon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The Send signaling logic is a little subtle, so add some
observability around it. For every xprtrdma_mr_fastreg event, there
should be an xprtrdma_mr_localinv or xprtrdma_mr_reminv event.
When these tracepoints are enabled, we can see exactly when an MR is
DMA-mapped, registered, invalidated (either locally or remotely) and
then DMA-unmapped.
kworker/u25:2-190 [000] 787.979512: xprtrdma_mr_map: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979515: xprtrdma_chunk_read: task:351@5 pos=148 5608@0x8679e0c8f6f56000:0x00000503 (last)
kworker/u25:2-190 [000] 787.979519: xprtrdma_marshal: task:351@5 xid=0x8679e0c8: hdr=52 xdr=148/5608/0 read list/inline
kworker/u25:2-190 [000] 787.979525: xprtrdma_mr_fastreg: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979526: xprtrdma_post_send: task:351@5 cq.id=0 cid=73 (2 SGEs)
...
kworker/5:1H-219 [005] 787.980567: xprtrdma_wc_receive: cq.id=1 cid=161 status=SUCCESS (0/0x0) received=164
kworker/5:1H-219 [005] 787.980571: xprtrdma_post_recvs: peer=[192.168.100.55]:20049 r_xprt=0xffff8884974d4000: 0 new recvs, 70 active (rc 0)
kworker/5:1H-219 [005] 787.980573: xprtrdma_reply: task:351@5 xid=0x8679e0c8 credits=64
kworker/5:1H-219 [005] 787.980576: xprtrdma_mr_reminv: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/5:1H-219 [005] 787.980577: xprtrdma_mr_unmap: mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
Note that I've moved the xprtrdma_post_send tracepoint so that event
always appears after the xprtrdma_mr_fastreg tracepoint. Otherwise
the event log looks counterintuitive (FastReg is always supposed to
happen before Send).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Send WRs can be signalled or unsignalled. A signalled Send WR
always has a matching Send completion, while a unsignalled Send
has a completion only if the Send WR fails.
xprtrdma has a Send account mechanism that is designed to reduce
the number of signalled Send WRs. This in turn mitigates the
interrupt rate of the underlying device.
RDMA consumers can't leave all Sends unsignaled, however, because
providers rely on Send completions to maintain their Send Queue head
and tail pointers. xprtrdma counts the number of unsignaled Send WRs
that have been posted to ensure that Sends are signalled often
enough to prevent the Send Queue from wrapping.
This mechanism neglected to account for FastReg WRs, which are
posted on the Send Queue but never signalled. As a result, the
Send Queue wrapped on occasion, resulting in duplication completions
of FastReg and LocalInv WRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Throw away any reply where the LocalInv flushes or could not be
posted. The registered memory region is in an unknown state until
the disconnect completes.
rpcrdma_xprt_disconnect() will find and release the MR. No need to
put it back on the MR free list in this case.
The client retransmits pending RPC requests once it reestablishes a
fresh connection, so a replacement reply should be forthcoming on
the next connection instance.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Better not to touch MRs involved in a flush or post error until the
Send and Receive Queues are drained and the transport is fully
quiescent. Simply don't insert such MRs back onto the free list.
They remain on mr_all and will be released when the connection is
torn down.
I had thought that recycling would prevent hardware resources from
being tied up for a long time. However, since v5.7, a transport
disconnect destroys the QP and other hardware-owned resources. The
MRs get cleaned up nicely at that point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: The comment and the placement of the memory barrier is
confusing. Humans want to read the function statements from head
to tail.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: To be consistent with other functions in this source file,
follow the naming convention of putting the object being acted upon
before the action itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The rpcrdma_mr_pop() earlier in the function has already cleared
out mr_list, so it must not be done again in the error path.
Fixes: 847568942f ("xprtrdma: Remove fr_state")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.
This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.
Fixes: e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up so that offset_in_page() is invoked less often in the
most common case, which is mapping xdr->pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Remove a conditional branch from the SGL set-up loop in frwr_map():
Instead of using either sg_set_page() or sg_set_buf(), initialize
the mr_page field properly when rpcrdma_convert_kvec() converts the
kvec to an SGL entry. frwr_map() can then invoke sg_set_page()
unconditionally.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Now that rpcrdma_ep is no longer part of rpcrdma_xprt, there are
four or five serial address dereferences needed to get to the
IB device needed for DMA unmapping.
Instead, let's use the same pattern that regbufs use: cache a
pointer to the device in the MR, and use that as the indication
that unmapping is necessary.
This also guarantees that the exact same device is used for DMA
mapping and unmapping, even if the r_xprt's ep has been replaced. I
don't think this can happen today, but future changes might break
this assumption.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This function is now invoked only in frwr_ops.c. The move
enables deduplication of the trace_xprtrdma_mr_unmap() call site.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Tie each MR event to the requesting rpc_task to make it easier to
follow MR ownership and control flow.
MR unmapping and recycling can happen in the background, after an
MR's mr_req field is stale, so set up a separate tracepoint class
for those events.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Replace the display of kernel memory addresses
- Add "_err" to the end of its name to indicate that it's a
tracepoint that fires only when there's an error
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set up a completion ID in each rpcrdma_frwr. The ID is used to match
an incoming completion to a transport (CQ) and other MR-related
activity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Pass struct rpcrdma_xprt instead of an IB layer object.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change the rpcrdma_xprt_disconnect() function so that it no longer
waits for the DISCONNECTED event. This prevents blocking if the
remote is unresponsive.
In rpcrdma_xprt_disconnect(), the transport's rpcrdma_ep is
detached. Upon return from rpcrdma_xprt_disconnect(), the transport
(r_xprt) is ready immediately for a new connection.
The RDMA_CM_DEVICE_REMOVAL and RDMA_CM_DISCONNECTED events are now
handled almost identically.
However, because the lifetimes of rpcrdma_xprt structures and
rpcrdma_ep structures are now independent, creating an rpcrdma_ep
needs to take a module ref count. The ep now owns most of the
hardware resources for a transport.
Also, a kref is needed to ensure that rpcrdma_ep sticks around
long enough for the cm_event_handler to finish.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I eventually want to allocate rpcrdma_ep separately from struct
rpcrdma_xprt so that on occasion there can be more than one ep per
xprt.
The new struct rpcrdma_ep will contain all the fields currently in
rpcrdma_ia and in rpcrdma_ep. This is all the device and CM settings
for the connection, in addition to per-connection settings
negotiated with the remote.
Take this opportunity to rename the existing ep fields from rep_* to
re_* to disambiguate these from struct rpcrdma_rep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Completion errors after a disconnect often occur much sooner than a
CM_DISCONNECT event. Use this to try to detect connection loss more
quickly.
Note that other kernel ULPs do take care to disconnect explicitly
when a WR is flushed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the post_send path
by combining the struct rpcrdma_ia and struct rpcrdma_ep arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: prepare for combining the rpcrdma_ia and rpcrdma_ep
structures. Take the opportunity to rename the function to be
consistent with the "subsystem _ object _ verb" naming scheme.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Two changes:
- Show the number of SG entries that were mapped. This helps debug
DMA-related problems.
- Record the MR's resource ID instead of its memory address. This
groups each MR with its associated rdma-tool output, and reduces
needless exposure of memory addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The @nents value that was passed to ib_dma_map_sg() has to be passed
to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to
concatenate sg entries, it will return a different nents value than
it was passed.
The bug was exposed by recent changes to the AMD IOMMU driver, which
enabled sg entry concatenation.
Looking all the way back to commit 4143f34e01 ("xprtrdma: Port to
new memory registration API") and reviewing other kernel ULPs, it's
not clear that the frwr_map() logic was ever correct for this case.
Reported-by: Andre Tomt <andre@tomt.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Perform the "is supported" check in rpcrdma_ep_create()
instead of in rpcrdma_ia_open(). frwr_open() is where most of the
logic to query device attributes is already located.
The current code displays a redundant error message when the device
does not support FRWR. As an additional clean-up, this patch removes
the extra message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To support device hotplug and migrating a connection between devices
of different capabilities, we have to guarantee that all in-kernel
devices can support the same max NFS payload size (1 megabyte).
This means that possibly one or two in-tree devices are no longer
supported for NFS/RDMA because they cannot support 1MB rsize/wsize.
The only one I confirmed was cxgb3, but it has already been removed
from the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean-up. The max_send_sge value also happens to be stored in
ep->rep_attr. Let's keep just a single copy.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This field is not needed in the Send completion handler,
so it can be moved to struct rpcrdma_req to reduce the size of
struct rpcrdma_sendctx, and to reduce the amount of memory that
is sloshed between the sending process and the Send completion
process.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
ia->ri_id is replaced during a reconnect. The connect_worker runs
with the transport send lock held to prevent ri_id from being
dereferenced by the send_request path during this process.
Currently, however, there is no guarantee that ia->ri_id is stable
in the MR recycling worker, which operates in the background and is
not serialized with the connect_worker in any way.
But now that Local_Inv completions are being done in process
context, we can handle the recycling operation there instead of
deferring the recycling work to another process. Because the
disconnect path drains all work before allowing tear down to
proceed, it is guaranteed that Local Invalidations complete only
while the ri_id pointer is stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
MRs are now allocated on demand so we can safely throw them away on
disconnect. This way an idle transport can disconnect and it won't
pin hardware MR resources.
Two additional changes:
- Now that all MRs are destroyed on disconnect, there's no need to
check during header marshaling if a req has MRs to recycle. Each
req is sent only once per connection, and now rl_registered is
guaranteed to be empty when rpcrdma_marshal_req is invoked.
- Because MRs are now destroyed in a WQ_MEM_RECLAIM context, they
also must be allocated in a WQ_MEM_RECLAIM context. This reduces
the likelihood that device driver memory allocation will trigger
memory reclaim during NFS writeback.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When adding frwr_unmap_async way back when, I re-used the existing
trace_xprtrdma_post_send() trace point to record the return code
of ib_post_send.
Unfortunately there are some cases where re-using that trace point
causes a crash. Instead, construct a trace point specific to posting
Local Invalidate WRs that will always be safe to use in that context,
and will act as a trace log eye-catcher for Local Invalidation.
Fixes: 847568942f ("xprtrdma: Remove fr_state")
Fixes: d8099feda4 ("xprtrdma: Reduce context switching due ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Bill Baker <bill.baker@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The optimization done in "xprtrdma: Simplify rpcrdma_mr_pop" was a
bit too optimistic. MRs left over after a reconnect still need to
be recycled, not added back to the free list, since they could be
in flight or actually fully registered.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Now that the free list is used sparingly, get rid of the
separate spin lock protecting it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of a globally-contended MR free list, cache MRs in each
rpcrdma_req as they are released. This means acquiring and releasing
an MR will be lock-free in the common case, even outside the
transport send lock.
The original idea of per-rpcrdma_req MR free lists was suggested by
Shirley Ma <shirley.ma@oracle.com> several years ago. I just now
figured out how to make that idea work with on-demand MR allocation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever