Trigger ieee80211_csa_finish() on the non-transmitting interfaces
when channel switch concludes on the transmitting interface.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new fields in struct beacon_data to store all MBSSID elements.
Generate a beacon template which includes all MBSSID elements.
Move CSA offset to reflect the MBSSID element length.
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Money Wang <money.wang@mediatek.com>
Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org
[small cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tony Nguyen says:
====================
ice: GTP support in switchdev
Marcin Szycik says:
Add support for adding GTP-C and GTP-U filters in switchdev mode.
To create a filter for GTP, create a GTP-type netdev with ip tool, enable
hardware offload, add qdisc and add a filter in tc:
ip link add $GTP0 type gtp role <sgsn/ggsn> hsize <hsize>
ethtool -K $PF0 hw-tc-offload on
tc qdisc add dev $GTP0 ingress
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
action mirred egress redirect dev $VF1_PR
By default, a filter for GTP-U will be added. To add a filter for GTP-C,
specify enc_dst_port = 2123, e.g.:
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
enc_dst_port 2123 action mirred egress redirect dev $VF1_PR
Note: outer IPv6 offload is not supported yet.
Note: GTP-U with no payload offload is not supported yet.
ICE COMMS package is required to create a filter as it contains GTP
profiles.
Changes in iproute2 [1] are required to be able to add GTP netdev and use
GTP-specific options (QFI and PDU type).
[1] https://lore.kernel.org/netdev/20220211182902.11542-1-wojciech.drewek@intel.com/T
---
v2: Add more CC
v3: Fix mail thread, sorry for spam
v4: Add GTP echo response in gtp module
v5: Change patch order
v6: Add GTP echo request in gtp module
v7: Fix kernel-docs in ice
v8: Remove handling of GTP Echo Response
v9: Add sending of multicast message on GTP Echo Response, fix GTP-C dummy
packet selection
v10: Rebase, fixed most 80 char line limits
v11: Rebase, collect Harald's Reviewed-by on patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler
Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.
Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.
v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot <lkp@intel.com>)
Change in netdev_core_stats_alloc() (Jakub)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: jeffreyji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_name_node_alt_create() and netdev_name_node_alt_destroy()
are only called by rtnetlink, so no need for exports.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220310223952.558779-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
-----BEGIN PGP SIGNATURE-----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=ccps
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Options are as follows: PDU_TYPE:QFI and they refernce to
the fields from the PDU Session Protocol. PDU Session data
is conveyed in GTP-U Extension Header.
GTP-U Extension Header is described in 3GPP TS 29.281.
PDU Session Protocol is described in 3GPP TS 38.415.
PDU_TYPE - indicates the type of the PDU Session Information (4 bits)
QFI - QoS Flow Identifier (6 bits)
# ip link add gtp_dev type gtp role sgsn
# tc qdisc add dev gtp_dev ingress
# tc filter add dev gtp_dev protocol ip parent ffff: \
flower \
enc_key_id 11 \
gtp_opts 1:8/ff:ff \
action mirred egress redirect dev eth0
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit bf08824a0f ("flow_dissector: Add support for HSR") added support for
HSR within the flow dissector. However, it only works for HSR in version
1. Version 0 uses a different Ether Type. Add support for it.
Reported-by: Anthony Harivel <anthony.harivel@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.
Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.
This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware
In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.
The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.
Tested on ath10k using WCN3990, QCA6174
Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While commit 6a01afcf84 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.
Cc: stable@vger.kernel.org
Fixes: 6a01afcf84 ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com
[Ghz -> GHz]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previous memory allocations in this function already use GFP_KERNEL, so
use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit
GFP_ATOMIC.
This gives more opportunities of successful allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.
Prevent the problem from occurring by checking the length
of the property list before adding new entries.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Few years ago OVS user space made a strange choice in the commit [1]
to define types only valid for the user space inside the copy of a
kernel uAPI header. '#ifndef __KERNEL__' and another attribute was
added later.
This leads to the inevitable clash between user space and kernel types
when the kernel uAPI is extended. The issue was unveiled with the
addition of a new type for IPv6 extension header in kernel uAPI.
When kernel provides the OVS_KEY_ATTR_IPV6_EXTHDRS attribute to the
older user space application, application tries to parse it as
OVS_KEY_ATTR_PACKET_TYPE and discards the whole netlink message as
malformed. Since OVS_KEY_ATTR_IPV6_EXTHDRS is supplied along with
every IPv6 packet that goes to the user space, IPv6 support is fully
broken.
Fixing that by bringing these user space attributes to the kernel
uAPI to avoid the clash. Strictly speaking this is not the problem
of the kernel uAPI, but changing it is the only way to avoid breakage
of the older user space applications at this point.
These 2 types are explicitly rejected now since they should not be
passed to the kernel. Additionally, OVS_KEY_ATTR_TUNNEL_INFO moved
out from the '#ifdef __KERNEL__' as there is no good reason to hide
it from the userspace. And it's also explicitly rejected now, because
it's for in-kernel use only.
Comments with warnings were added to avoid the problem coming back.
(1 << type) converted to (1ULL << type) to avoid integer overflow on
OVS_KEY_ATTR_IPV6_EXTHDRS, since it equals 32 now.
[1] beb75a40fdc2 ("userspace: Switching of L3 packets in L2 pipeline")
Fixes: 28a3f06017 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Link: https://lore.kernel.org/netdev/3adf00c7-fe65-3ef4-b6d7-6d8a0cad8a5f@nvidia.com
Link: beb75a40fd
Reported-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220309222033.3018976-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmIpyLkTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXU2LB/oDq++xqO2WjiRgj//tzyz8MIUlDcR6
WsLGiXUj3XOhj/hX11RcttIKceYf2Tzen9skbabOe3zwBOqutqiXkLRjPKZ6EVpX
sZsVq0J+Bgz8IeE3u+qAHDt2ycc4AOMrVefkssXSn+r/06cKLZKnalw+8ioce4cu
4GyR6Bfm59aY1tdL3p+KcoPwR78FQsTxrbUAYyJ9UlfagZvc6uWe42hk6JBsXjBp
eU/1UvnUuxhHsCetovVUbmRXFnsyWOIbyKrcPMsn+agUDNP+gASbP3lL710w812v
8DS79MllMe3OFPpWi4Yrg/ihG0m5o4n1OVSWZkyKvpSE0rIpn3lTY2gB
=u2iw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-10
The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.
The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.
Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.
2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.
The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.
* tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits)
can: gs_usb: add VID/PID for ABE CAN Debugger devices
can: gs_usb: add VID/PID for CES CANext FD devices
can: gs_usb: add extended bt_const feature
can: gs_usb: activate quirks for CANtact Pro unconditionally
can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
can: gs_usb: add usb quirk for NXP LPC546xx controllers
can: gs_usb: add CAN-FD support
can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
can: gs_usb: support up to 3 channels per device
can: gs_usb: gs_usb_probe(): introduce udev and make use of it
can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
can: gs_usb: document the USER_ID feature
can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
can: gs_usb: add HW timestamp mode bit
can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
can: gs_usb: rewrap error messages
can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
can: gs_usb: sort include files alphabetically
can: gs_usb: fix checkpatch warning
...
====================
Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work,
make connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WfAR
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 4a48ef70b9 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reason to extend the max PDU size from 4095 Byte (12 bit length value)
to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte
bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel
implementation was set to 8200 Bytes to be able to test the length
information escape sequence.
It turns out that the demand for 64 kByte PDUs is real so the value for
MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums
to the 65.536 Byte block.
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1056142301
Link: https://lore.kernel.org/all/20220309120416.83514-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).
Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.
With this N_As/frame_txtime value the 'burst mode' is disabled by default.
As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Instead of dumping the CAN frames into the netdevice queue the process to
transmit consecutive frames (CF) now waits for the frame to be transmitted
and therefore echo'ed from the CAN interface.
Link: https://lore.kernel.org/all/20220309120416.83514-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.
The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.
Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()
Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.
This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.
/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.
Tested:
100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.
Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)
~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96005
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
65,945.29 msec task-clock # 2.845 CPUs utilized
1,314,632 context-switches # 19935.279 M/sec
5,292 cpu-migrations # 80.249 M/sec
940,641 page-faults # 14264.023 M/sec
201,117,030,926 cycles # 3049769.216 GHz (83.45%)
17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%)
136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%)
53,809,530,436 instructions # 0.27 insn per cycle
# 2.54 stalled cycles per insn (83.36%)
9,062,315,523 branches # 137422329.563 M/sec (83.22%)
153,008,621 branch-misses # 1.69% of all branches (83.32%)
23.182970846 seconds time elapsed
TcpInSegs 15648792 0.0
TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered 58654791 0.0
TcpExtTCPDeliveredCE 19 0.0
After patch:
~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96046
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
48,982.58 msec task-clock # 2.104 CPUs utilized
186,014 context-switches # 3797.599 M/sec
3,109 cpu-migrations # 63.472 M/sec
941,180 page-faults # 19214.814 M/sec
153,459,763,868 cycles # 3132982.807 GHz (83.56%)
12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%)
120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%)
36,803,672,106 instructions # 0.24 insn per cycle
# 3.27 stalled cycles per insn (83.18%)
5,947,266,275 branches # 121417383.427 M/sec (83.64%)
87,984,616 branch-misses # 1.48% of all branches (83.43%)
23.281200256 seconds time elapsed
TcpInSegs 1434706 0.0
TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered 58878971 0.0
TcpExtTCPDeliveredCE 9664 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_should_autocork() is evaluating if it makes senses
to not immediately send current skb, hoping that
user space will add more payload on it by the
time TCP stack reacts to upcoming TX completions.
If current skb got MSG_EOR mark, then we know
that no further data will be added, it is therefore
futile to wait.
SOF_TIMESTAMPING_TX_ACK will become a bit more accurate,
if prior packets are still in qdisc/device queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220309054706.2857266-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when CONFIG_SYSCTL not set, smc_sysctl_net_init/exit
need to be static inline to avoid missing-prototypes
if compile with W=1.
Since __net_exit has noinline annotation when CONFIG_NET_NS
not set, it should not be used with static inline.
So remove the __net_init/exit when CONFIG_SYSCTL not set.
Fixes: 7de8eb0d90 ("net/smc: fix compile warning for smc_sysctl")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220309033051.41893-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-09
1) Fix IPv6 PMTU discovery for xfrm interfaces.
From Lina Wang.
2) Revert failing for policies and states that are
configured with XFRMA_IF_ID 0. It broke a
user configuration. From Kai Lueke.
3) Fix a possible buffer overflow in the ESP output path.
4) Fix ESP GSO for tunnel and BEET mode on inter address
family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes: 4e0f718daf ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a number of cases where function returns drop/no drop
decision as a boolean. Now that we want to report the reason
code as well we have to pass extra output arguments.
We can make the reason code evaluate correctly as bool.
I believe we're good to reorder the reasons as they are
reported to user space as strings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Felix driver declares FDB isolation but puts all standalone ports in
VID 0. This is mostly problem-free as discussed with Alvin here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220302191417.1288145-1-vladimir.oltean@nxp.com/#24763870
however there is one catch. DSA still thinks that FDB entries are
installed on the CPU port as many times as there are user ports, and
this is problematic when multiple user ports share the same MAC address.
Consider the default case where all user ports inherit their MAC address
from the DSA master, and then the user runs:
ip link set swp0 address 00:01:02:03:04:05
The above will make dsa_slave_set_mac_address() call
dsa_port_standalone_host_fdb_add() for 00:01:02:03:04:05 in port 0's
standalone database, and dsa_port_standalone_host_fdb_del() for the old
address of swp0, again in swp0's standalone database.
Both the ->port_fdb_add() and ->port_fdb_del() will be propagated down
to the felix driver, which will end up deleting the old MAC address from
the CPU port. But this is still in use by other user ports, so we end up
breaking unicast termination for them.
There isn't a problem in the fact that DSA keeps track of host
standalone addresses in the individual database of each user port: some
drivers like sja1105 need this. There also isn't a problem in the fact
that some drivers choose the same VID/FID for all standalone ports.
It is just that the deletion of these host addresses must be delayed
until they are known to not be in use any longer, and only the driver
has this knowledge. Since DSA keeps these addresses in &cpu_dp->fdbs and
&cpu_db->mdbs, it is just a matter of walking over those lists and see
whether the same MAC address is present on the CPU port in the port db
of another user port.
I have considered reusing the generic dsa_port_walk_fdbs() and
dsa_port_walk_mdbs() schemes for this, but locking makes it difficult.
In the ->port_fdb_add() method and co, &dp->addr_lists_lock is held, but
dsa_port_walk_fdbs() also acquires that lock. Also, even assuming that
we introduce an unlocked variant of the address iterator, we'd still
need some relatively complex data structures, and a void *ctx in the
dsa_fdb_walk_cb_t which we don't currently pass, such that drivers are
able to figure out, after iterating, whether the same MAC address is or
isn't present in the port db of another port.
All the above, plus the fact that I expect other drivers to follow the
same model as felix where all standalone ports use the same FID, made me
conclude that a generic method provided by DSA is necessary:
dsa_fdb_present_in_other_db() and the mdb equivalent. Felix calls this
from the ->port_fdb_del() handler for the CPU port, when the database
was classified to either a port db, or a LAG db.
For symmetry, we also call this from ->port_fdb_add(), because if the
address was installed once, then installing it a second time serves no
purpose: it's already in hardware in VID 0 and it affects all standalone
ports.
This change moves dsa_db_equal() from switch.c to dsa.c, since it now
has one more caller.
Fixes: 54c3198460 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the slave unicast address is synced to hardware and to the DSA
master during dsa_slave_open(), this means that a call to
dsa_slave_set_mac_address() while the slave interface is down will
result to a call to dsa_port_standalone_host_fdb_del() and to
dev_uc_del() for the MAC address while there was no previous
dsa_port_standalone_host_fdb_add() or dev_uc_add().
This is a partial revert of the blamed commit below, which was too
aggressive.
Fixes: 35aae5ab91 ("net: dsa: remove workarounds for changing master promisc/allmulti only while up")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
&cpu_db->fdbs and &cpu_db->mdbs may be uninitialized lists during some
call paths of felix_set_tag_protocol().
There was an attempt to avoid calling dsa_port_walk_fdbs() during setup
by using a "bool change" in the felix driver, but this doesn't work when
the tagging protocol is defined in the device tree, and a change is
triggered by DSA at pseudo-runtime:
dsa_tree_setup_switches
-> dsa_switch_setup
-> dsa_switch_setup_tag_protocol
-> ds->ops->change_tag_protocol
dsa_tree_setup_ports
-> dsa_port_setup
-> &dp->fdbs and &db->mdbs only get initialized here
So it seems like the only way to fix this is to move the initialization
of these lists earlier.
dsa_port_touch() is called from dsa_switch_touch_ports() which is called
from dsa_switch_parse_of(), and this runs completely before
dsa_tree_setup(). Similarly, dsa_switch_release_ports() runs after
dsa_tree_teardown().
Fixes: f9cef64fa2 ("net: dsa: felix: migrate host FDB and MDB entries when changing tag proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There has been recent work towards matching each switchdev object
addition with a corresponding deletion.
Therefore, having elements in the fdbs, mdbs, vlans lists at the time of
a shared (DSA, CPU) port's teardown is indicative of a bug somewhere
else, and not something that is to be expected.
We shouldn't try to silently paper over that. Instead, print a warning
and a stack trace.
This change is a prerequisite for moving the initialization/teardown of
these lists. Make it clear that clearing the lists isn't needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes: 9aa422ad32 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENOTSUPP is documented as "should never be seen by user programs",
and thus not exposed in <errno.h>, and thus applications cannot safely
check against it (they get "Unknown error 524" as strerror). We should
rather return the well-known -EOPNOTSUPP.
This is similar to 2230a7ef51 ("drop_monitor: Use correct error
code") and 4a5cdc604b ("net/tls: Fix return values to avoid
ENOTSUPP"), which did not seem to cause problems.
Signed-off-by: Samuel Thibault <samuel.thibault@labri.fr>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220307223126.djzvg44v2o2jkjsx@begin
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fullmesh flag mustn't be used with the signal flag when adding an
address. This patch added the necessary flags check for this case.
Fixes: 73c762c1f0 ("mptcp: set fullmesh flag in pm_netlink")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The address ID selection for MPJ subflows created in response
to incoming ADD_ADDR option is currently unreliable: it happens
at MPJ socket creation time, when the local address could be
unknown.
Additionally, if the no local endpoint is available for the local
address, a new dummy endpoint is created, confusing the user-land.
This change refactor the code to move the address ID selection inside
the rebuild_header() helper, when the local address eventually
selected by the route lookup is finally known. If the address used
is not mapped by any endpoint - and thus can't be advertised/removed
pick the id 0 instead of allocate a new endpoint.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR
command, generates RM_ADDR events for each known local address. While that
is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR
generated when both ends flush the PM addresses.
This change restricts the RM_ADDR generation to previously explicitly
announced addresses, and adjust the expected results in a bunch of related
self-tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set subflow->data_avail with the enum value MPTCP_SUBFLOW_NODATA, instead
of using 0 directly.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tracepoint in get_mapping_status() only dumped the incoming mpext
fields. This patch added a new tracepoint in mptcp_sendmsg_frag() to dump
the outgoing mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this situation (VLAN filtering disabled on br0):
br0.10
/
br0
/ \
swp0 swp1
When a frame is transmitted from the VLAN upper, the bridge will send
it down to one of the switch ports with forward offloading
enabled. This will cause tag_dsa to generate a FORWARD tag. Before
this change, that tag would have it's VID set to 10, even though VID
10 is not loaded in the VTU.
Before the blamed commit, the frame would trigger a VTU miss and be
forwarded according to the PVT configuration. Now that all fabric
ports are in 802.1Q secure mode, the frame is dropped instead.
Therefore, restrict the condition under which we rewrite an 802.1Q tag
to a DSA tag. On standalone port's, reuse is always safe since we will
always generate FROM_CPU tags in that case. For bridged ports though,
we must ensure that VLAN filtering is enabled, which in turn
guarantees that the VID in question is loaded into the VTU.
Fixes: d352b20f41 ("net: dsa: mv88e6xxx: Improve multichip isolation of standalone ports")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220307110548.812455-1-tobias@waldekranz.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The clang static analyzer reports this issue
rtnetlink.c:5481:2: warning: Undefined or garbage
value returned to caller
return err;
^~~~~~~~~~
There is a function level err variable, in the
list_for_each_entry_rcu block there is a shadow
err. Remove the shadow.
In the same block, the call to nla_nest_start_noflag()
can fail without setting an err. Set the err
to -EMSGSIZE.
Fixes: 216e690631 ("net: rtnetlink: rtnl_fill_statsinfo(): Permit non-EMSGSIZE error returns")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang static analysis reports this representative issue
dsa.c:486:2: warning: Undefined or garbage value
returned to caller
return err;
^~~~~~~~~~
err is only set in the loop. If the loop is empty,
garbage will be returned. So initialize err to 0
to handle this noop case.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes: 384a46ea7b ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Lorenzo Bianconi