Commit 8184d44c9a ("selftests/bpf: skip verifier tests for unsupported
program types") added a check to skip unsupported program types. As
bpf_probe_prog_type can change errno, do_single_test should save it before
printing a reason why a supported BPF program type failed to load.
Fixes: 8184d44c9a ("selftests/bpf: skip verifier tests for unsupported program types")
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201204181828.11974-2-dev@der-flo.net
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check that close_range(initial_fd, last_fd, CLOSE_RANGE_CLOEXEC)
correctly sets the close-on-exec bit for the specified file
descriptors.
Open 100 file descriptors and set the close-on-exec flag for a subset
of them first, then set it for every file descriptor above 2. Make
sure RLIMIT_NOFILE doesn't affect the result.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Link: https://lore.kernel.org/r/20201118104746.873084-3-gscrivan@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Fixes: 73563aa3d9 ("selftests/bpf: test_sockmap, print additional test options")
Fixes: 1ade9abadf ("bpf: test_sockmap, add options for msg_pop_data() helper")
Fixes: 463bac5f1c ("bpf, selftests: Add test for ktls with skb bpf ingress policy")
Fixes: e9dd904708 ("bpf: add tls support for testing in test_sockmap")
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
Add another CO-RE relocation test for kernel module relocations. This time for
tp_btf with direct memory reads.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-14-andrii@kernel.org
Add a self-tests validating libbpf is able to perform CO-RE relocations
against the type defined in kernel module BTF. if bpf_testmod.o is not
supported by the kernel (e.g., due to version mismatch), skip tests, instead
of failing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-9-andrii@kernel.org
Previously skipped sub-tests would be counted as passing with ":OK" appened
in the log. Change that to be accounted as ":SKIP".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-8-andrii@kernel.org
Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related functionality:
raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by
test_progs test runner and expected by some of selftests to be present and
loaded.
Pahole currently isn't able to generate BTF for static functions in kernel
modules, so make sure traced function is global.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
This object lives inside the trunner output dir,
i.e. tools/testing/selftests/bpf/no_alu32/btf_data.o
At some point it gets copied into the parent directory during another
part of the build, but that doesn't happen when building
test_progs-no_alu32 from clean.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20201203120850.859170-1-jackmanb@google.com
The file was formatted with spaces instead of tabs and went unnoticed
as checkpatch.pl did not complain (probably because this is a shell
script). Re-indent it with tabs to be consistent with other scripts.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-5-kpsingh@chromium.org
The ima selftest restricts its scope to a test filesystem image
mounted on a loop device and prevents permanent ima policy changes for
the whole system.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-4-kpsingh@chromium.org
SecurityFS may not be mounted even if it is enabled in the kernel
config. So, check if the mount exists in /proc/mounts by parsing the
file and, if not, mount it on /sys/kernel/security.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-3-kpsingh@chromium.org
losetup on busybox does not output the name of loop device on using
-f with --show. It also doesn't support -j to find the loop devices
for a given backing file. losetup is updated to use "-a" which is
available on busybox.
blkid does not support options (-s and -o) to only display the uuid, so
parse the output instead.
Not all environments have mkfs.ext4, the test requires a loop device
with a backing image file which could formatted with any filesystem.
Update to using mkfs.ext2 which is available on busybox.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-2-kpsingh@chromium.org
Splice (copy_file_range) doesn't work on all filesystems. I'm running
test kernels on top of my read-only disk image and it uses plan9 under the
hood. This prevents test_local_storage from successfully passing.
There is really no technical reason to use splice, so lets do
old-school read/write to copy file; this should work in all
environments.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202174947.3621989-1-sdf@google.com
The current memory region move test correctly handles the situation that
the second (realigning) memslot move operation would temporarily trigger
MMIO until it completes, however it does not handle the case in which the
first (misaligning) move operation does this, too.
This results in false test assertions in case it does so.
Fix this by handling temporary MMIO from the first memslot move operation
in the test guest code, too.
Fixes: 8a0639fe92 ("KVM: sefltests: Add explicit synchronization to move mem region test")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <0fdddb94bb0e31b7da129a809a308d91c10c0b5e.1606941224.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch fixes uninitialized variable warning in bad_accesses test
which causes the selftests build to fail in older distibutions
bad_accesses.c: In function ‘bad_access’:
bad_accesses.c:52:9: error: ‘x’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
printf("Bad - no SEGV! (%c)\n", x);
^
cc1: all warnings being treated as errors
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201092403.238182-1-harish@linux.ibm.com
I did an in-place build of the self-tests and found that it left
the tree dirty.
Add missed test binaries to .gitignore
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201144427.1228745-1-dja@axtens.net
Now that we reject conflicting RESOLVE_ flags, add a selftest to avoid
regressions.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20201027235044.5240-3-cyphar@cyphar.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Remove rlimit-based accounting infrastructure code, which is not used
anymore.
To provide a backward compatibility, use an approximation of the
bpf map memory footprint as a "memlock" value, available to a user
via map info. The approximation is based on the maximal number of
elements and key and value sizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
I'm planning to extend it in the next patches. It's much easier to
work with C than BPF assembly.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201202172516.3483656-2-sdf@google.com
This is the patch I'm using to evaluate the impact syscall user dispatch
has on native syscall (syscalls not redirected to userspace) when
enabled for the process and submiting syscalls though the unblocked
dispatch selector. It works by running a step to define a baseline of
the cost of executing sysinfo, then enabling SUD, and rerunning that
step.
On my test machine, an AMD Ryzen 5 1500X, I have the following results
with the latest version of syscall user dispatch patches.
root@olga:~# syscall_user_dispatch/sud_benchmark
Calibrating test set to last ~5 seconds...
test iterations = 37500000
Avg syscall time 134ns.
Caught sys_ff00
trapped_call_count 1, native_call_count 0.
Avg syscall time 147ns.
Interception overhead: 9.7% (+13ns).
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201127193238.821364-7-krisman@collabora.com
Implement functionality tests for syscall user dispatch. In order to
make the test portable, refrain from open coding syscall dispatchers and
calculating glibc memory ranges.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201127193238.821364-6-krisman@collabora.com
Avoid occasional test failures due to the last sample being delayed to
another ring_buffer__poll() call. Instead, drain samples completely with
ring_buffer__consume(). This is supposed to fix a rare and non-deterministic
test failure in libbpf CI.
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-2-andrii@kernel.org
Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org
Test that each veto that was added in the previous patch, is indeed
vetoed.
$ ./q_in_q_veto.sh
TEST: create 802.1ad vlan upper on top of a front panel [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port [ OK ]
TEST: create 802.1ad vlan upper on top of a lag [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge [ OK ]
TEST: IP address addition to 802.1ad bridge [ OK ]
TEST: switch bridge protocol [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, kunit_tool expects all diagnostic lines in test results to
contain ": " somewhere, as both the subtest header and the crash report
do. Fix this to accept any line starting with (minus indent) "# " as
being a valid diagnostic line.
This matches what the TAP spec[1] and the draft KTAP spec[2] are
expecting.
[1]: http://testanything.org/tap-specification.html
[2]: https://lore.kernel.org/linux-kselftest/CY4PR13MB1175B804E31E502221BC8163FD830@CY4PR13MB1175.namprd13.prod.outlook.com/T/
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Flavored variants of test_progs (e.g. test_progs-no_alu32) change their
working directory to the corresponding subdirectory (e.g. no_alu32).
Since the setup script required by test_ima (ima_setup.sh) is not
mentioned in the dependencies, it does not get copied to these
subdirectories and causes flavored variants of test_ima to fail.
Adding the script to TRUNNER_EXTRA_FILES ensures that the file is also
copied to the subdirectories for the flavored variants of test_progs.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201126184946.1708213-1-kpsingh@chromium.org
The logic for truncating the log file for emailing based on the
MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the
tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org
Fixes: 855d8abd2e ("ktest.pl: Change the logic to control the size of the log file emailed")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the size of the error log is too big to send via email, and the sending
fails, it wont email any result. This can be confusing for the user who is
waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that
it failed to send an email. Obviously this will not be of use if the sending
of email failed for some other reasons, but it will at least give the user
some information when it fails for the most common reason.
Cc: stable@vger.kernel.org
Fixes: c2d84ddb33 ("ktest.pl: Add MAIL_COMMAND option to define how to send email")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This issue was first noticed when I was testing different kernels on
Oracle Linux 8 which as Fedora 30+ adopts BLS as default. Even though a
kernel entry was added successfully and the index of that kernel entry was
retrieved correctly, ktest still wouldn't reboot the system into
user-specified kernel.
The bug was spotted in subroutine reboot_to where the if-statement never
checks for REBOOT_TYPE "grub2bls", therefore the desired entry will not be
set for the next boot.
Add a check for "grub2bls" so that $grub_reboot $grub_number can
be run before a reboot if REBOOT_TYPE is "grub2bls" then we can boot to
the correct kernel.
Link: https://lkml.kernel.org/r/20201121021243.1532477-1-libo.chen@oracle.com
Cc: stable@vger.kernel.org
Fixes: ac2466456e ("ktest: introduce grub2bls REBOOT_TYPE option")
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
a proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new cipher as a variant of standard tls selftests
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DEMUX register presence depends on the host's hardware (the
CLIDR_EL1 register to be precise). This means there's no set
of them that we can bless and that it's possible to encounter
new ones when running on different hardware (which would
generate "Consider adding them ..." messages, but we'll never
want to add them.)
Remove the ones we have in the blessed list and filter them
out of the new list, but also provide a new command line switch
to list them if one so desires.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126134641.35231-3-drjones@redhat.com
This patch provides the test application for DMA_MAP_BENCHMARK.
Before running the test application, we need to bind a device to dma_map_
benchmark driver. For example, unbind "xxx" from its original driver and
bind to dma_map_benchmark:
echo dma_map_benchmark > /sys/bus/platform/devices/xxx/driver_override
echo xxx > /sys/bus/platform/drivers/xxx/unbind
echo xxx > /sys/bus/platform/drivers/dma_map_benchmark/bind
Another example for PCI devices:
echo dma_map_benchmark > /sys/bus/pci/devices/0000:00:01.0/driver_override
echo 0000:00:01.0 > /sys/bus/pci/drivers/xxx/unbind
echo 0000:00:01.0 > /sys/bus/pci/drivers/dma_map_benchmark/bind
The below command will run 16 threads on numa node 0 for 10 seconds on
the device bound to dma_map_benchmark platform_driver or pci_driver:
./dma_map_benchmark -t 16 -s 10 -n 0
dma mapping benchmark: threads:16 seconds:10
average map latency(us):1.1 standard deviation:1.9
average unmap latency(us):0.5 standard deviation:0.8
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Before this patch, profiler.inc.h wouldn't compile with clang-11 (before
the __builtin_preserve_enum_value LLVM builtin was introduced in
https://reviews.llvm.org/D83242).
Another test that uses this builtin (test_core_enumval) is conditionally
skipped if the compiler is too old. In that spirit, this patch inhibits
part of populate_cgroup_info(), which needs this CO-RE builtin. The
selftests build again on clang-11.
The affected test (the profiler test) doesn't pass on clang-11 because
it's missing https://reviews.llvm.org/D85570, but at least the test suite
as a whole compiles. The test's expected failure is already called out in
the README.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florian Lehner <dev@der-flo.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201125035255.17970-1-andreimatei1@gmail.com
The test does the following:
- Mounts a loopback filesystem and appends the IMA policy to measure
executions only on this file-system. Restricting the IMA policy to
a particular filesystem prevents a system-wide IMA policy change.
- Executes an executable copied to this loopback filesystem.
- Calls the bpf_ima_inode_hash in the bprm_committed_creds hook and
checks if the call succeeded and checks if a hash was calculated.
The test shells out to the added ima_setup.sh script as the setup is
better handled in a shell script and is more complicated to do in the
test program or even shelling out individual commands from C.
The list of required configs (i.e. IMA, SECURITYFS,
IMA_{WRITE,READ}_POLICY) for running this test are also updated.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (limit policy rule to loopback mount)
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-4-kpsingh@chromium.org
A couple of places in the readme had invalid rst formatting causing the
rendering to be off. This patch fixes them with minimal edits.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-2-andreimatei1@gmail.com
The link was bad because of invalid rst; it was pointing to itself and
was rendering badly.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-1-andreimatei1@gmail.com
Test that packets hitting a blackhole nexthop are trapped to the CPU
when the trap is enabled. Test that packets are not reported when the
trap is disabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that IPv4 and IPv6 ping fail when the route is using a blackhole
nexthop or a group with a blackhole nexthop. Test that ping passes when
the route starts using a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the mlxsw allows blackhole nexthops to be installed and that the
nexthops are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting GS to 1, 2, or 3 causes a nonsensical part of the IRET microcode
to change GS back to zero on a return from kernel mode to user mode. The
result is that these tests fail randomly depending on when interrupts
happen. Detect when this happens and let the test pass.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/7567fd44a1d60a9424f25b19a998f12149993b0d.1604346596.git.luto@kernel.org
Add few cases to test the dynamic allocation flow of
__sg_alloc_table_from_pages.
Link: https://lore.kernel.org/r/20201115120650.139277-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël Salaün)
-----BEGIN PGP SIGNATURE-----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=1Mse
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This gets the seccomp selftests running again on powerpc and sh, and
fixes an audit reporting oversight noticed in both seccomp and ptrace.
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
Salaün)"
* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: sh: Fix register names
selftests/seccomp: powerpc: Fix typo in macro variable name
seccomp: Set PF_SUPERPRIV when checking capability
ptrace: Set PF_SUPERPRIV when checking capability
This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a nexthop objects version of gre_multipath.sh. Unlike the original
test, it also tests IPv6 overlay which is not possible with the legacy
nexthop implementation. See commit 9a2ad36238 ("selftests: forwarding:
gre_multipath: Drop IPv6 tests") for more info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to router_multipath.sh and its nexthop objects
version router_mpath_nh.sh, create a nexthop objects version of
router.sh.
It reuses the same topology, but uses device-only nexthop objects
instead of legacy ones.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4
multipath with nexthops that use IPv6 link-local addresses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
routing_nh_obj() is used to configure the nexthop objects employed by
the test, but it is called twice resulting in "RTNETLINK answers: File
exists" messages.
Remove the first call, so that the function is only called after
setup_wait(), when all the interfaces are up and ready.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that unsupported nexthop objects are rejected and that offload
indication is correctly set on: nexthop objects, nexthop group objects
and routes associated these objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add scripts to test ring and coalesce settings
of netdevsim.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out by Michal Kubecek, getting the name
with the previous approach was racy, it's better
and easier to get the name of the device with this
patch's approach.
Essentialy the function doesn't need to exist
anymore as it's a simple 'ls' command.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out some useful functions so that they can be reused
by other ethtool-netdevsim scripts.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.
Fixes: 0bb605c2c7 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>
A typo sneaked into the powerpc selftest. Fix the name so it builds again.
Fixes: 46138329fa ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid crash
- lan743x: prevent interrupt storm on open
- lan743x: fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths,
mostly detected by the Hulk Robot
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+226AACgkQMUZtbf5S
IruE1w/+JX3CqJwGIqyzyhwVshNaKxmX9gAOMJzkckjEohn8932zPaNq7kbmNYqt
5QsJoou3cXjFeoIEAkQA5fqR4stTZpZMnLO+7JnxxQ0vb2YBN+tIGQRNCnmd1Q0h
u9gb5+5AdORdlmk3E7oC8v50dzQRfboJXLEEZTo2uGJwUgLlEAiqTSV2w4YDHMhL
JtgtWA/fraL0CUc2WMoxuimg9NirbRuMijsU6+d/yExzznDpdoho/qsxL+Odu1NF
hSdaKirA8B8ml0pOd/b4mj+fm4+lKyXZBfSyLx4Ki1TqluEMLzDp7gQPRnU6yyJm
AOu4zsKxx6qitOX2qLQCNlEpkQp6LA2N2Zb1orliUV3Bsq2DJRhU35FgLcghtdRP
GTRSdKHr2BvMScOZ7dQo8l4TqVc3e/khSZDRGdvpsM275Dt0JyS/l7yAWxunPqMb
+/483/s75OuBRO57ULLJ/hR02TG37g/Jv5sI0sG/7oDpGfnulinQX+fxy9izyTEM
KYl0mAPSqhb6RcjE0YXWG0rhJN6FSvc/lwPQHjq8wPSkwEdD/FTb6/eYqbXDi1ld
UTYhFpkh1PQrwct14eSScMeJqTsNKvG0VV39/uZLZCzcqa3yOY5+oTzwaCFlMsy3
a5yGGxqoh7/FTM8t1ml21is9uZ31LAQEnNTMPv69pZPwAv5G5yE=
=SRwI
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
A collection of error case bug fixes
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing
-----BEGIN PGP SIGNATURE-----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=oIS7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.
This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+2aqETHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgG+hD/4njSFct2amqWfqDYR9b2OykWmnMQXn
geookk5SbItQF7vh1q2SVA6r43s5ZAxgD5fezx4LgG6p3QU39+Tr0RhzUUHWMPDV
UNGZK6x/N/GSYeq0bqvMHmVwS0FDjPE8nOtA8Hn2T9mUUsu9G0okpgYPLnEu6rb1
gIyS35zlLBh9obi3MfJzyln/AmCE7hdonKRtLAxvGiERJAyfAG757lrdjrwavyHy
mwz+XPl5PF88jfO5cbcZT9gNHmZZPzVsOVwNcstCh2FcwuePv9dWe1pxsBxxKqP5
UXceXPcKM7VlRNmehimq7q/hfbget4RJGGKYPNXeKHOo6yfy7lJPiQV4h+5z2pSs
SPP2fQQPq0aubmcO23CXFtZl4WRHQ4pax6opepnpIfC2vZ0HLXJtPrhMKcbFJNTo
qPis6HWQPpIuI6l4MJfs+YO9ETxCR31Yd28qFAfPFoHlnQZTfx6NPhw8HKxTbSh2
Svr4X6Y14j3UsQgLTCArCXWAG/hlfRwxDZJ4AvR9EU0HJGDyZ45Y+LTD1N8bbsny
zcYfPqWGPIanLcNPNFYIQwDZo7ff08KdmngUvf/Q9om60mP1hsPJMHf6VhPXj4fC
2TZ11fORssSlBSNtIkFkbjEG+aiWtWnz3fN3uSyT50rgGwtDHJzVzLiUWHlZKcxW
X73YdxuT8fqQwg==
=Yibq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.
If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The eeh-basic test got its own 60 seconds timeout (defined in commit
414f50434a "selftests/eeh: Bump EEH wait time to 60s") per breakable
device.
And we have discovered that the number of breakable devices varies
on different hardware. The device recovery time ranges from 0 to 35
seconds. In our test pool it will take about 30 seconds to run on a
Power8 system that with 5 breakable devices, 60 seconds to run on a
Power9 system that with 4 breakable devices.
Extend the timeout setting in the kselftest framework to 5 minutes
to give it a chance to finish.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023024539.9512-1-po-hsu.lin@canonical.com
A lot of tests require unaligned memory access to work. Mark the tests
as such, so that they can be avoided on unsupported architectures such
as RISC-V.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-4-bjorn.topel@gmail.com
Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.
Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.
By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.
Fixes: 167381f3ea ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
This Kunit update for Linux 5.10-rc5 consists of several fixes Kunit
documentation, tool, compile time fixes not pollute source directory,
and fix to remove tools/testing/kunit/.gitattributes file.
-----BEGIN PGP SIGNATURE-----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=mGWU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
Use a statically generated key for signing the enclave, because
generating keys on the fly can eat the kernel entropy pool. Another
good reason for doing this is predictable builds. The RSA has been
arbitrarily selected. It's contents do not matter.
This also makes the selftest execute a lot quicker instead of the delay
that it had before (because of slow key generation).
[ bp: Disambiguate "static key" which means something else in the
kernel, fix typos. ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-kselftest@vger.kernel.org
Link: https://lkml.kernel.org/r/20201118170640.39629-1-jarkko@kernel.org
Add a selftest for SGX. It is a trivial test where a simple enclave
copies one 64-bit word of memory between two memory locations,
but ensures that all SGX hardware and software infrastructure is
functioning.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Cc: linux-kselftest@vger.kernel.org
Link: https://lkml.kernel.org/r/20201112220135.165028-21-jarkko@kernel.org
The test forks a child process, updates the local storage to set/unset
the securexec bit.
The BPF program in the test attaches to bprm_creds_for_exec which checks
the local storage of the current task to set the secureexec bit on the
binary parameters (bprm).
The child then execs a bash command with the environment variable
TMPDIR set in the envp. The bash command returns a different exit code
based on its observed value of the TMPDIR variable.
Since TMPDIR is one of the variables that is ignored by the dynamic
loader when the secureexec bit is set, one should expect the
child execution to not see this value when the secureexec bit is set.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-2-kpsingh@chromium.org
Add missing define of ALIGN_DOWN to make the test build and run. In
addition, __sg_alloc_table_from_pages now support unaligned maximum
segment, so adapt the test result accordingly.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 65b4414a05 ("selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201116101633.64627-1-wanghai38@huawei.com
Almost all tests do this anyway and the ones that don't don't
appear to care. Only vmx_set_nested_state_test assumes that
a feature (VMX) is disabled until later setting the supported
CPUIDs. It's better to disable that explicitly anyway.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-11-drjones@redhat.com>
[Restore CPUID_VMX, or vmx_set_nested_state breaks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-12-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From second fragment on, IPV6FR program must stop the dissection of IPV6
fragmented packet. This is the same approach used for IPV4 fragmentation.
This fixes the flow keys calculation for the upper-layer protocols.
Note that according to RFC8200, the first fragment packet must include
the upper-layer header.
Signed-off-by: Santucci Pierpaolo <santucci@epigenesys.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/X7JUzUj34ceE2wBm@santucci.pierpaolo
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-10-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new vm_create variants that also takes a number of vcpus,
an amount of per-vcpu pages, and optionally a list of vcpuids. These
variants will create default VMs with enough additional pages to
cover the vcpu stacks, per-vcpu pages, and pagetable pages for all.
The new 'default' variant uses VM_MODE_DEFAULT, whereas the other
new variant accepts the mode as a parameter.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-6-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code is almost 100% the same anyway. Just move it to common
and add a few arch-specific macros.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing sets USE_CLEAR_DIRTY_LOG anymore, so anything it surrounds
is dead code.
However, it is the recommended way to use the dirty page bitmap
for new enough kernel, so use it whenever KVM has the
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 capability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's only used to override the existing dirty ring size/count. If
with a bigger ring count, we test async of dirty ring. If with a
smaller ring count, we test ring full code path. Async is default.
It has no use for non-dirty-ring tests.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012241.6208-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously the dirty ring test was working in synchronous way, because
only with a vmexit (with that it was the ring full event) we'll know
the hardware dirty bits will be flushed to the dirty ring.
With this patch we first introduce a vcpu kick mechanism using SIGUSR1,
which guarantees a vmexit and also therefore the flushing of hardware
dirty bits. Once this is in place, we can keep the vcpu dirty work
asynchronous of the whole collection procedure now. Still, we need
to be very careful that when reaching the ring buffer soft limit
(KVM_EXIT_DIRTY_RING_FULL) we must collect the dirty bits before
continuing the vcpu.
Further increase the dirty ring size to current maximum to make sure
we torture more on the no-ring-full case, which should be the major
scenario when the hypervisors like QEMU would like to use this feature.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012239.6159-1-peterx@redhat.com>
[Use KVM_SET_SIGNAL_MASK+sigwait instead of a signal handler. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the initial dirty ring buffer test.
The current test implements the userspace dirty ring collection, by
only reaping the dirty ring when the ring is full.
So it's still running synchronously like this:
vcpu main thread
1. vcpu dirties pages
2. vcpu gets dirty ring full
(userspace exit)
3. main thread waits until full
(so hardware buffers flushed)
4. main thread collects
5. main thread continues vcpu
6. vcpu continues, goes back to 1
We can't directly collects dirty bits during vcpu execution because
otherwise we can't guarantee the hardware dirty bits were flushed when
we collect and we're very strict on the dirty bits so otherwise we can
fail the future verify procedure. A follow up patch will make this
test to support async just like the existing dirty log test, by adding
a vcpu kick mechanism.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012237.6111-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a hook for the checks after vcpu_run() completes. Preparation
for the dirty ring test because we'll need to take care of another
exit reason.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012235.6063-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_HV_CPUID is now supported as both vCPU and VM ioctl,
test that.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200929150944.1235688-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the KVM_SET_SREGS test to verify that all supported CR4 bits, as
enumerated by KVM, can be set before KVM_SET_CPUID2, i.e. without first
defining the vCPU model. KVM is supposed to skip guest CPUID checks
when host userspace is stuffing guest state.
Check the inverse as well, i.e. that KVM rejects KVM_SET_REGS if CR4
has one or more unsupported bits set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.
Fixes: 51c39bb1d5 (bpf: Introduce function-by-function verification)
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
This patch tests storing the task's related info into the
bpf_sk_storage by fentry/fexit tracing at listen, accept,
and connect. It also tests the raw_tp at inet_sock_set_state.
A negative test is done by tracing the bpf_sk_storage_free()
and using bpf_sk_storage_get() at the same time. It ensures
this bpf program cannot load.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com
Add few assembly tests for packet comparison.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201111031213.25109-4-alexei.starovoitov@gmail.com
When working on the rp_filter problem, I didn't realise that disabling
it on the network devices didn't cover all cases: rp_filter could also
be enabled globally in the namespace, in which case it would drop
packets, even if the net device has rp_filter=0.
Fixes: 1ccd58331f ("selftests: disable rp_filter when testing bareudp")
Fixes: bbbc7aa45e ("selftests: add test script for bareudp tunnels")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- net: udp: fix out-of-order packets when forwarding with UDP GSO
fraglists turned on
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter rules
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AKM7
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
Correct attribute name is "unused". maybe_unused is a C++17 addition.
This patch fixes compilation warning during selftests compilation.
Fixes: 197afc6314 ("libbpf: Don't attempt to load unused subprog as an entry-point BPF program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201111231215.1779147-1-andrii@kernel.org
This test will treat all non-zero return codes as failures, it will
make the pmtu.sh test script being marked as FAILED when some
sub-test got skipped.
Improve the result processing by
* Only mark the whole test script as SKIP when all of the
sub-tests were skipped
* If the sub-tests were either passed or skipped, the overall
result will be PASS
* If any of them has failed with return code 1 or anything bad
happened (e.g. return code 127 for command not found), the
overall result will be FAIL
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test uses return code 2 as a hard-coded skipped state, let's use
the kselftest framework skip code variable $ksft_skip instead to make
it more readable and easier to maintain.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In comment 173ca26e9b ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.
This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
Some systems have rp_filter=1 as default configuration. This breaks
bareudp.sh as the intermediate namespaces handle part of the routing
with regular IPv4 routes but the reverse path is done with tc
(flower/tunnel_key/mirred).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/28140b7d20161e4f766b558018fe2718f9bc1117.1604767577.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On older distros struct clone_args does not have a cgroup member,
leading to build errors:
cgroup_util.c: In function 'clone_into_cgroup':
cgroup_util.c:343:4: error: 'struct clone_args' has no member named 'cgroup'
cgroup_util.c:346:33: error: invalid application of 'sizeof' to incomplete
type 'struct clone_args'
But the selftests already have a locally defined version of the
structure which is up to date, called __clone_args.
So use __clone_args which fixes the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Should be -d instead of -n for dry-run.
Fixes: 5da1918446 ("selftests/run_kselftest.sh: Make each test individually selectable")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The memfd tests emit several warnings:
fuse_test.c:261:7: warning: implicit declaration of function 'open'
fuse_test.c:67:6: warning: implicit declaration of function 'fcntl'
memfd_test.c:397:6: warning: implicit declaration of function 'fallocate'
memfd_test.c:64:7: warning: implicit declaration of function 'open'
memfd_test.c:90:6: warning: implicit declaration of function 'fcntl'
These are all caused by the test not including fcntl.h.
Instead of including linux/fcntl.h, include fcntl.h, which should
eventually cause the former to be included as well.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use clock_gettime() instead of deprecated ftime().
aperf.c: In function ‘main’:
aperf.c:58:2: warning: ‘ftime’ is deprecated [-Wdeprecated-declarations]
58 | ftime(&before);
| ^~~~~
In file included from aperf.c:9:
/usr/include/sys/timeb.h:39:12: note: declared here
39 | extern int ftime (struct timeb *__timebuf)
| ^~~~~
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rather than overriding the CLEAN rule we can just append to it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the gpio selftests fail to build if the source tree is read
only:
make -j 160 -C tools/testing/selftests TARGETS=gpio
make[1]: Entering directory '/linux/tools/testing/selftests/gpio'
make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio
make[2]: Entering directory '/linux/tools/gpio'
mkdir -p /linux/tools/gpio/include/linux 2>&1 || true
ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h
ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system
This happens because we ask make to build ../../../gpio (tools/gpio)
without pointing OUTPUT away from the source directory.
To fix it we create a subdirectory of the existing OUTPUT directory,
called tools-gpio, and tell tools/gpio to build in there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move the include of lib.mk up so that in a subsequent patch we can use
OUTPUT, which is initialised by lib.mk, in the definition of the GPIO
variables.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.
That tells the lib.mk logic that the files it references are to be
generated by the Makefile.
Having done that we don't need to override the all rule.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For simplcity, strip all trailing whitespace from parsed output.
I imagine no one is printing out meaningful trailing whitespace via
KUNIT_FAIL() or similar, and that if they are, they really shouldn't.
`isolate_kunit_output()` yielded liens with trailing \n, which results
in artifacty output like this:
$ ./tools/testing/kunit/kunit.py run
[16:16:46] [FAILED] example_simple_test
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
After this change:
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
We should *not* be expecting lines to end with \n in kunit_tool_test.py
for this reason.
Do the same for `raw_output()` as well which suffers from the same
issue.
This is a followup to [1], but rebased onto kunit-fixes to pick up the
other raw_output() fix and fixes for kunit_tool_test.py.
[1] https://lore.kernel.org/linux-kselftest/20201020233219.4146059-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the tool redirects make stdout + stderr, and only shows them
if the make command fails.
This means build warnings aren't shown to the user.
This change prints the contents of stderr even if make succeeds, under
the assumption these are only build warnings or other messages the user
likely wants to see.
We drop stdout from the raised exception since we can no longer easily
collate stdout and stderr and just showing the stderr seems fine.
Example with a warning:
[14:56:35] Building KUnit Kernel ...
../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable]
19 | int unused;
| ^~~~~~
[14:56:40] Starting KUnit Kernel ...
Note the stderr has a trailing \n, and since we use print, we add
another, but it helps separate make and kunit.py output.
Example with a build error:
[15:02:45] Building KUnit Kernel ...
ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’
19 | invalid_type *test = data;
| ^~~~~~~~~~~~
...
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The code uses annotations, but they aren't accurate.
Note that type checking in python is a separate process, running
`kunit.py run` will not check and complain about invalid types at
runtime.
Fix pre-existing issues found by running a type checker
$ mypy *.py
All but one of these were returning `None` without denoting this
properly (via `Optional[Type]`).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When JSON support was added in [1], the KunitParseRequest tuple was
updated to contain a 'build_dir' field, but kunit.py parse doesn't
accept --build_dir as an option. The code nevertheless tried to access
it, resulting in this error:
AttributeError: 'Namespace' object has no attribute 'build_dir'
Given that the parser only uses the build_dir variable to set the
'build_environment' json field, we set it to None (which gives the JSON
'null') for now. Ultimately, we probably do want to be able to set this,
but since it's new functionality which (for the parse subcommand) never
worked, this is the quickest way of getting it back up and running.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit-fixes&id=21a6d1780d5bbfca0ce9b8104ca6233502fcbf86
Fixes: 21a6d1780d ("kunit: tool: allow generating test results in JSON")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The tools/testing/kunit/test_data/ directory was marked as binary
because some of the test_data files cause checkpatch warnings. Fix this
by dropping the .gitattributes file.
Fixes: afc63da64f ("kunit: kunit_parser: make parser more robust")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add an additional control test that verifies:
-specifying two different max_num_members values fails
-specifying max_num_members > PACKET_FANOUT_MAX fails
In datapath tests, set max_num_members to PACKET_FANOUT_MAX.
Signed-off-by: Tanner Love <tannerlove@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some globals in the tcp_hdr_options test and btf_skc_cls_ingress test
are not using static scope. This patch fixes it.
Targeting bpf-next branch as an improvement since it currently does not
break the build.
Fixes: ad2f8eb009 ("bpf: selftests: Tcp header options")
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201106225402.4135741-1-kafai@fb.com
- Fix compilation error when PMD and PUD are folded
- Fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
- Add aarch64 get-reg-list test
x86:
- fix semantic conflict between two series merged for 5.10
- fix (and test) enforcement of paravirtual cpuid features
Generic:
- various cleanups to memory management selftests
- new selftests testcase for performance of dirty logging
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+pVjkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO3fAf/ZniW/7FC4pD/M0txXUst3mKNcC16
AbMfN36dvzdWBnAuTVsP2d+XM/sbPNacomcJGfJ5II9TKrb00FUNxU37In7vdbbm
WjpyDEpRDXnCY+OXs7dwY66dEXzv9GTzlQaGuah67AeGpzSuu3zrXlu07di446Gv
ZtHvbzFEvos7cByp3LoPfvbnvv9kkD5mQkOW7wG42hUPrxMNxtHC+qyP92DIpV8d
etDNC95rhdhhZM3LAlvO6Bp4I1uFXpYHEHtIOOT05IB9clNhfdgsuD8wiqWfEo0l
sVhg3yXWbbfGaP3vEZp5QY9qko8I0XjwIWc5hWsIHST7uPqgi8a/wIbbEA==
=jBcA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix compilation error when PMD and PUD are folded
- fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
- add aarch64 get-reg-list test
x86:
- fix semantic conflict between two series merged for 5.10
- fix (and test) enforcement of paravirtual cpuid features
selftests:
- various cleanups to memory management selftests
- new selftests testcase for performance of dirty logging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: selftests: allow two iterations of dirty_log_perf_test
KVM: selftests: Introduce the dirty log perf test
KVM: selftests: Make the number of vcpus global
KVM: selftests: Make the per vcpu memory size global
KVM: selftests: Drop pointless vm_create wrapper
KVM: selftests: Add wrfract to common guest code
KVM: selftests: Simplify demand_paging_test with timespec_diff_now
KVM: selftests: Remove address rounding in guest code
KVM: selftests: Factor code out of demand_paging_test
KVM: selftests: Use a single binary for dirty/clear log test
KVM: selftests: Always clear dirty bitmap after iteration
KVM: selftests: Add blessed SVE registers to get-reg-list
KVM: selftests: Add aarch64 get-reg-list test
selftests: kvm: test enforcement of paravirtual cpuid features
selftests: kvm: Add exception handling to selftests
selftests: kvm: Clear uc so UCALL_NONE is being properly reported
selftests: kvm: Fix the segment descriptor layout to match the actual layout
KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs
kvm: x86: request masterclock update any time guest uses different msr
kvm: x86: ensure pv_cpuid.features is initialized when enabling cap
...
If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.
Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.
Fixes: 9a94f277c4 ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Florian Lehner