The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which
was manufactured by the now-defunct ICP Vortex company, later acquired by
Adaptec and superseded by the aacraid series of controllers. The driver
itself would require a major overhaul before any modifications can be
attempted, but seeing that it's unlikely to have any users left it should
rather be removed completely.
Link: https://lore.kernel.org/r/20210113090500.129644-2-hare@suse.de
Cautiously-Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
transport_handle_cdb_direct() uses in_interrupt() to detect if it is safe
to sleep. It produces a stack trace and returns with an error which is
clearly for debugging.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
transport_handle_cdb_direct() has a comment saying that it may only be
invoked from process context. It invokes transport_generic_new_cmd() which
performs GFP_KERNEL memory allocations. in_interrupt() does not detect all
the contexts where it is invalid to sleep (for the blocking GFP_KERNEL
allocation) as it fails to detect sections with disabled preemption.
Replace the in_interrupt() based check with a might_sleep() annotation.
Link: https://lore.kernel.org/r/20201220203638.43615-7-bigeasy@linutronix.de
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd_map_sgls() uses in_interrupt() to crash if it returns
true.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The usage of in_interrupt() is clearly for debugging. might_sleep() is
better at this because it also detects other contexts in which it is not
allowed to sleep, like preempt-disabled section.
Replace BUG_ON(in_interrupt) with might_sleep().
Link: https://lore.kernel.org/r/20201220203638.43615-6-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_alua_check_nonop_delay() uses in_interrupt() to decide if it is safe
to sleep.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
core_alua_check_nonop_delay() has two callers:
- target_submit_cmd_map_sgls()
Kernel doc says it that it must be called from process context. Also has
a BUG_ON(in_interrupt()).
- iscsit_setup_scsi_cmd()
Invokes iscsit_add_reject_cmd() which does GFP_KERNEL allocation and
target_cmd_init_cdb() which may do GFP_KERNEL allocations.
Remove the in_interrupt() check because all callers are from preemptible
context.
Link: https://lore.kernel.org/r/20201220203638.43615-5-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of iscsit_check_session_usage_count() is only checked if
it was not allowed to sleep. If it returns `2' then a timer is prepared. If
it returns something else or if it was allowed to sleep then it is ignored.
Let iscsit_check_session_usage_count() return true if it needs to arm the
timer - otherwise false. This simplifies the code flow of the only caller.
Link: https://lore.kernel.org/r/20201220203638.43615-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsit_check_session_usage_count() uses in_interrupt() to find out if it is
safe to invoke wait_for_completion().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
There is only one caller of iscsit_check_session_usage_count() which
already has an argument indicating if it is safe to sleep.
Extend iscsit_check_session_usage_count() by an argument indicating if it
may sleep.
Link: https://lore.kernel.org/r/20201220203638.43615-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsit_close_session() uses in_interrupt() to decide if it needs to check
the return value of iscsit_check_session_usage_count() if it was not able
to sleep.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
iscsit_close_session() has two callers:
- iscsit_handle_time2retain_timeout()
A timer_list callback.
- iscsit_close_connection()
Runs in preemptible context, acquires a mutex.
Add an argument to iscsit_close_session() indicating if sleeping is
possible.
Link: https://lore.kernel.org/r/20201220203638.43615-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manipulate clock scaling related stuff only if the host capability supports
clock scaling feature to avoid redundant code execution.
Link: https://lore.kernel.org/r/20210120150142.5049-4-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hba->devfreq is zero-initialized thus it is not required to check its
existence in ufshcd_add_lus() function which is invoked during
initialization only.
Link: https://lore.kernel.org/r/20210120150142.5049-3-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cancelling suspend_work and resume_work is only required while suspending
clk-scaling. Move these two invocations into ufshcd_suspend_clkscaling()
function.
Link: https://lore.kernel.org/r/20210120150142.5049-2-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 73cc291c27 ("scsi: ufs: Make sure clk scaling happens only
when HBA is runtime ACTIVE") is no longer needed since commit
0e9d4ca43b ("scsi: ufs: Protect some contexts from unexpected clock
scaling") is a more mature fix to protect UFS LLD stability from clock
scaling invoked through sysfs nodes by users.
Link: https://lore.kernel.org/r/1611137065-14266-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_hba_exit() is always called after ufshcd_exit_clk_scaling() and
ufshcd_exit_clk_gating(). Move ufshcd_exit_clk_scaling/gating() to
ufshcd_hba_exit(). Meanwhile, add dedicated functions to initialize
and remove sysfs nodes of clock scaling/gating to make the code more
readable. Overall functionality remains same.
Link: https://lore.kernel.org/r/1611137065-14266-3-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In contexts like suspend, shutdown, and error handling we need to
suspend devfreq to make sure these contexts won't be disturbed by
clock scaling. However, suspending devfreq is not enough since users
can still trigger a clock scaling by manipulating the devfreq sysfs
nodes like min/max_freq and governor even after devfreq is
suspended. Moreover, mere suspending devfreq cannot synchroinze a
clock scaling which has already been invoked through these sysfs
nodes. Add one more flag in struct clk_scaling and wrap the entire
func ufshcd_devfreq_scale() with the clk_scaling_lock, so that we can
use this flag and clk_scaling_lock to control and synchronize clock
scaling invoked through devfreq sysfs nodes.
Link: https://lore.kernel.org/r/1611137065-14266-2-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS device-related flags should be grouped in ufs_dev_info. Move wb_enabled
and wb_buf_flush_enabled out from struct ufs_hba, group them in struct
ufs_dev_info, and align the names of the structure members vertically.
Link: https://lore.kernel.org/r/20210119163847.20165-6-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
d_wb_alloc_units and d_ext_ufs_feature_sup are only used during WB probe.
They are used to confirm the condition that "if bWriteBoosterBufferType
is set to 01h but dNumSharedWriteBoosterBufferAllocUnits is set to zero,
the WriteBooster feature is disabled", and if UFS device supports WB.
No need to keep them after probing is complete.
Link: https://lore.kernel.org/r/20210119163847.20165-5-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
USFHCD supports both WriteBooster "LU dedicated buffer" mode and "shared
buffer" mode. Update the comment accordingly in the function
ufshcd_wb_probe().
Link: https://lore.kernel.org/r/20210119163847.20165-4-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adds UFS sysfs documentation for new entry wb_on.
[mkp: fix doc formatting]
Link: https://lore.kernel.org/r/20210119163847.20165-3-huobean@gmail.com
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix format
Currently UFS WriteBooster driver uses clock scaling up/down to set WB
on/off. For the platforms which don't support UFSHCD_CAP_CLK_SCALING, WB
will be always on. Provide a sysfs attribute to enable/disable WB during
runtime. Write 1/0 to "wb_on" sysfs node to enable/disable UFS WB.
Link: https://lore.kernel.org/r/20210119163847.20165-2-huobean@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some SoCs require a single scatterlist entry for smaller than page size,
i.e. 4KB. When dispatching commands with more than one scatterlist entry
under 4KB in size the following behavior is observed:
A command to read a block range is dispatched with two scatterlist entries
that are named AAA and BBB. After dispatching, the host builds two PRDT
entries and during transmission, device sends just one DATA IN because
device doesn't care about host DMA. The host then transfers the combined
amount of data from start address of the area named AAA. As a consequence,
the area that follows AAA in memory would be corrupted.
|<------------->|
+-------+------------ +-------+
+ AAA + (corrupted) ... + BBB +
+-------+------------ +-------+
To avoid this we need to enforce page size alignment for sg entries.
Link: https://lore.kernel.org/r/56dddef94f60bd9466fd77e69f64bbbd657ed2a1.1611026909.git.kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once going into while-do loop, intr_status is already true, this
if-statement is redundant, remove it.
Link: https://lore.kernel.org/r/20210118201233.3043-1-huobean@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A block of code is indented one level too deeply, clean this up.
Link: https://lore.kernel.org/r/20210115095824.9170-1-colin.king@canonical.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Indentation does not match nesting level")
Pull in the 5.11 SCSI fixes branch to provide an updated baseline for
megaraid and hisi_sas. Both drivers received core changes in
v5.11-rc3.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for eh_should_retry_cmd callback in lpfc_template.
Link: https://lore.kernel.org/r/1609969748-17684-6-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add store capability to the rport port_state using sysfs under
fc_remote_ports/rport-*/port_state.
With this the user can move the port_state from Marginal->Online and
Online->Marginal.
- Marginal: This interface will set SCMD_NORETRIES_ABORT bit in
scmd->state for all the pending I/Os on the SCSI device associated with
target port.
- Online: This interface will clear SCMD_NORETRIES_ABORT bit in
scmd->state for all the pending I/Os on the SCSI device associated with
target port.
The following interface is provided to set the port state to Marginal and
Online respectively:
echo "Marginal" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state
echo "Online" >> /sys/class/fc_remote_ports/rport-X\:Y-Z/port_state
Link: https://lore.kernel.org/r/1609969748-17684-5-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new interface, fc_eh_should_retry_cmd(), which checks if the cmd
should be retried or not by checking the rport state. If the rport state is
marginal it returns false to make sure there won't be any retries on the
cmd.
Make the fc_remote_port_delete(), fc_user_scan_tgt(), and
fc_timeout_deleted_rport() functions handle the new rport state.
Link: https://lore.kernel.org/r/1609969748-17684-4-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new optional routine, eh_should_retry_cmd(), in scsi_host_template
that allows the transport to decide if a cmd is retryable. Return true if
the transport is in a state the cmd should be retried on.
Update scmd_eh_abort_handler() and scsi_eh_flush_done_q() to both call
scsi_eh_should_retry_cmd() to check whether the command needs to be
retried.
The above changes were based on a patch by Mike Christie.
Link: https://lore.kernel.org/r/1609969748-17684-3-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add code in scsi_result_to_blk_status to translate a new error
DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e
BLK_STS_TRANSPORT.
Add DID_TRANSPORT_MARGINAL case to scsi_decide_disposition().
Link: https://lore.kernel.org/r/1609969748-17684-2-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the various module parameter toggles for adjusting the MQ
characteristics at boot/load time as well as a device attribute for
changing the client scsi channel request amount.
Link: https://lore.kernel.org/r/20210114203148.246656-22-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Turn on MQ by default and set sane values for the upper limit on hw queues
for the SCSI host, and number of hw SCSI channels to request from the
partner VIOS.
Link: https://lore.kernel.org/r/20210114203148.246656-21-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Grab the queue and list lock for each Sub-CRQ and add any uncompleted
events to the host purge list.
Link: https://lore.kernel.org/r/20210114203148.246656-20-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In general the client needs to send Cancel MADs and task management
commands down the same channel as the command(s) intended to cancel or
abort. The client assigns cancel keys per LUN and thus must send a Cancel
down each channel commands were submitted for that LUN. Further, the client
then must wait for those cancel completions prior to submitting a LUN RESET
or ABORT TASK SET.
Add a cancel rsp iu syncronization field to the ibmvfc_queue struct such
that the cancel routine can sync the cancel response to each queue that
requires a cancel command. Build a list of each cancel event sent and wait
for the completion of each submitted cancel.
Link: https://lore.kernel.org/r/20210114203148.246656-19-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper routine for initializing a Cancel MAD. This will be useful for
a channelized client that needs to send Cancel commands down every channel
commands were sent for a particular LUN.
Link: https://lore.kernel.org/r/20210114203148.246656-18-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the ibmvfc client adapter requests channels it must submit a number of
Sub-CRQ handles matching the number of channels being requested. The VIOS
in its response will overwrite the actual number of channel resources
allocated which may be less than what was requested. The client then must
store the VIOS Sub-CRQ handle for each queue. This VIOS handle is needed as
a parameter with h_send_sub_crq().
Link: https://lore.kernel.org/r/20210114203148.246656-17-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the client has negotiated the use of channels all vfcFrames are
required to go down a Sub-CRQ channel or it is a protocoal violation. If
the adapter state is channelized submit vfcFrames to the appropriate
Sub-CRQ via the h_send_sub_crq() helper.
Link: https://lore.kernel.org/r/20210114203148.246656-16-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Extract the hwq id from a SCSI command and store it in the ibmvfc_event
structure to identify which Sub-CRQ to send the command down when channels
are being utilized.
Link: https://lore.kernel.org/r/20210114203148.246656-15-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previous patches have plumbed the necessary Sub-CRQ interface and channel
negotiation MADs to fully channelize via hardware backed queues.
Advertise client support via NPIV Login capability IBMVFC_CAN_USE_CHANNELS
when the client bits have MQ enabled via vhost->mq_enabled, or when
channels were already in use during a subsequent NPIV Login. The later is
required because channel support is only renegotiated after a CRQ pair is
broken. Simple NPIV Logout/Logins require the client to continue to
advertise the channel capability until the CRQ pair between the client is
broken.
Link: https://lore.kernel.org/r/20210114203148.246656-14-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
New NPIV_ENQUIRY_CHANNEL and NPIV_SETUP_CHANNEL management datagrams (MADs)
were defined in a previous patchset. If the client advertises a desire to
use channels and the partner VIOS is channel capable then the client must
proceed with channel enquiry to determine the maximum number of channels
the VIOS is capable of providing, and registering SubCRQs via channel setup
with the VIOS immediately following NPIV Login. This handshaking should not
be performed for subsequent NPIV Logins unless the CRQ connection has been
reset.
Implement these two new MADs and issue them following a successful NPIV
login where the VIOS has set the SUPPORT_CHANNELS capability bit in the
NPIV Login response.
Link: https://lore.kernel.org/r/20210114203148.246656-13-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create an irq mapping for the hw_irq number provided from phyp firmware.
Request an irq assigned our Sub-CRQ interrupt handler. Unmap these irqs at
Sub-CRQ teardown.
Link: https://lore.kernel.org/r/20210114203148.246656-12-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simple handler that calls Sub-CRQ drain routine directly.
Link: https://lore.kernel.org/r/20210114203148.246656-11-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The logic for iterating over the Sub-CRQ responses is similiar to that of
the primary CRQ. Add the necessary handlers for processing those responses.
Link: https://lore.kernel.org/r/20210114203148.246656-10-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Each Sub-CRQ has its own interrupt. A hypercall is required to toggle the
IRQ state. Provide the necessary mechanism via a helper function.
Link: https://lore.kernel.org/r/20210114203148.246656-9-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allocate a set of Sub-CRQs in advance. During channel setup the client and
VIOS negotiate the number of queues the VIOS supports and the number that
the client desires to request. Its possible that the final channel
resources allocated is less than requested, but the client is still
responsible for sending handles for every queue it is hoping for.
Also, provide deallocation cleanup routines.
Link: https://lore.kernel.org/r/20210114203148.246656-8-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Subordinate Command Response Queues (Sub CRQ) are used in conjunction with
the primary CRQ when more than one queue is needed by the virtual I/O
adapter. Recent phyp firmware versions support Sub CRQ's with ibmvfc
adapters. This feature is a prerequisite for supporting multiple hardware
backed submission queues in the vfc adapter.
The Sub CRQ command element differs from the standard CRQ in that it is
32bytes long as opposed to 16bytes for the latter. Despite this extra
16bytes the ibmvfc protocol will use the original CRQ command element
mapped to the first 16bytes of the Sub CRQ element initially.
Add definitions for the Sub CRQ command element and queue.
Link: https://lore.kernel.org/r/20210114203148.246656-7-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke