The remove misses to disable and unprepare rclk and hclk.
Add calls to clk_disable_unprepare to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200109103148.5612-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style in
header file related to SLIMbus driver.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200109103148.5612-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200109103148.5612-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix below issue reported by coccicheck
./drivers/slimbus/slimbus.h:440:3-46: duplicated argument to && or ||
Looks like this was a typo, SLIM_MSG_MC_REQUEST_CHANGE_VALUE is command
which requires transaction ID, so fix it, this also fix the warning.
Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190818093902.29993-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190818093902.29993-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rely on MODULE_ALIAS() for automatic kernel module loading, rather than
basing it on the OF compatible. This ensures that drivers without
of_device_id table, such as wcd9335, will be automatically loaded.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[bjorn: Added commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc comments in drivers/slimbus/stream.c were not properly
formatted, leading to a distinctly unsatisfying "no structured comments
found" warning in the docs build. Sprinkle some asterisks around so that
the comments will be properly recognized.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling device_status callback under a lock would prevent drivers
to do any slimbus trasactions which would invoke this lock like
get_laddr(). Remove this unnecessary lock!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
match full slim device id instead of just product and manufacture code,
this will allow drivers to be much more specific to that device.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a dev_err message, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
to select it, not depend upon it.
Because of this change, we now also need to depend on the same
Kconfigs as QCOM_QMI_HELPERS depends on.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on non DT platforms like x86 of_match_node is set to NULL, dereferencing
directly would throw an error.
Fix this by doing this in two steps, get the match then the data.
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core,
so performing a check in ngd driver is totally unnecessary.
Also this patch fixes warning about mc field overflow reported
with CoverityScan.
Making clk pause feature optional will be added to slim core in
next development cycle.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to uevent to help automatic module loading.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device status update can be racy with probe in some cases, so make sure
it take lock during the probe. Also after probe the device is expected
to be ready for communications, so make sure that a logical address
can be assigned to it after probe. If it fails to do so then probe
defer such instances.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_id for device tree based devices come from dt compatible string,
such drivers need not provide non dt style device id table.
Match those device using compatible strings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate logical address assigned by remote, in failure cases this value
is all zeors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register slimbus controller only after finishing powerup sequnce so that we
do not endup in situation where core starts sending transactions before
the controller is ready.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It looks like there is a typo in probe return. Fix it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move ngd platform driver out of loop so that it registers only once.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qcom_slim_ngd_runtime_suspend is protected by an #ifdef,
qcom_slim_ngd_runtime_idle is now, which causes a build time warning:
drivers/slimbus/qcom-ngd-ctrl.c:1470:12: error: 'qcom_slim_ngd_runtime_idle' defined but not used [-Werror=unused-function]
Marking both as __maybe_unused lets us get rid of the warning
as well as the #ifdef.
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes below warning during building htmldoc:
slimbus.h:352: warning: Function parameter or member 'name'
not described in 'slim_stream_runtime'
This patch also removes documentation for state variable
in struct slim_stream_runtime which was redundant and removed.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to stream support, this involve implementing
user specific implementation of Data channel management and channel
management SLIMbus messages.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to SLIMbus stream apis for slimbus device.
SLIMbus streaming involves adding support to Data Channel Management and
channel Reconfiguration Messages to slim core plus few stream apis.
>From slim device side the apis are very simple mostly inline with other
stream apis.
Currently it only supports Isochronous and Push/Pull transport protocols,
which are sufficient for audio use cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds suppor to Qualcomm SLIMBus Non-Generic Device (NGD)
controller driver.
This is light-weight SLIMBus controller driver responsible for
communicating with slave HW directly over the bus using messaging
interface, and communicating with master component residing on ADSP
for bandwidth and data-channel management
Based on intial work from
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds slim_alloc_txn_tid() and slim_free_txn_tid() api
to allow controllers like ngd to allocate tids for user specific
commands. This also cleans up the existing code to use single place
for tid allocations and free.
This patch also make the tid allocation cyclic one, its very useful
to track the transactions back during debug.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On SLIMBus controllers like Qcom NGD(non ported device), controller
can request logical address once the remote side is powered, having a
helper function like this to explicitly enumerate the bus is helpful.
Also codec drivers which are taking to interface device would need
such a helper too.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
QCOM SLIMBus controller is already under a 'if SLIMBUS' in Kconfig,
having depends on SLIMBUS is totally redundant. Just remove it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slim_val_inf can contain random value from stack, make sure the completion
is initialized to NULL while filling the msg.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There seems to be a multiple calls to pm_runtime_mark_last_busy(),
which looks like a typo.
Fix this by properly adding pm_runtime_put_autosuspend to put controller
in auto suspend state.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There seems to be a typo while filling msg for slim_write, wbuf is
set to NULL instead of rbuf.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes below warning when driver is compiled with W=1
qcom-ctrl.c: In function 'qcom_slim_rxwq':
qcom-ctrl.c:442:13: warning: variable 'len' set but not used
[-Wunused-but-set-variable]
len seems to be unused in this function, so remove it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With gcc-4.1.2:
slimbus/messaging.c: In function ‘slim_slicesize’:
slimbus/messaging.c:186: warning: statement with no effect
Indeed, clamp() is a macro not operating in-place, but returning the
clamped value. Hence the value is not clamped at all, which may lead to
an out-of-bounds access.
Fix this by assigning the clamped value.
Fixes: afbdcc7c38 ("slimbus: Add messaging APIs to slimbus framework")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Below build failure was reported on UML,
ERROR: "devm_ioremap_resource" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "__ioread32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "__iowrite32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "devm_ioremap" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
This patch fixes it by making qcom slimbus depend on HAS_IOMEM, as
these are only defined when HAS_IOMEM is selected.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing unlock before return from function slim_msg_response()
in the error handling case.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A spin lock is taken here so we should use GFP_ATOMIC.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions slim_ack_txn and slim_alloc_txbuf are local to the
source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'slim_ack_txn' was not declared. Should it be static?
symbol 'slim_alloc_txbuf' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the check for too many retries fails because retries is actually
-1 when the retry loop terminates if no pbuf can be allocated because of
the post decrement on retries. Fix this by not comparing retries with zero
but instead check if it is negative.
Detected by CoverityScan, CID#1463143 ("Logically dead code") and
CID#1463144 ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer msg is checked to see if it is null at the start of
the function and jumps to the error exit label reterr that then
dereferences msg when it prints a dev_err error message. Avoid
this potential null pointer dereference by only printing the
error message if msg is not null.
Detected by CoverityScan, CID#1463141 ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous patch addressed a warning but not the cause:
drivers/slimbus/qcom-ctrl.c: In function 'qcom_slim_probe':
drivers/slimbus/qcom-ctrl.c:584:9: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
There are two things wrong here:
- The naming is very confusing, we now have a member named 'phys'
that doesn't refer to a phys_addr_t but a dma_addr_t. If we needed
a dma address, it should be named 'dma' to avoid confusion, and
to make it less likely that someone passes it into a function that
expects a physical address.
- The dma address is not used at all at this point. It may have been
designed to support DMA in the future, but today it doesn't, so
the only effect right now is to make transfers artificially slower
by using uncached memory instead of cached memory for a temporary
buffer.
This removes the unused structure member and instead changes the code
to call devm_kcalloc(), which matches the usage of the 'base' pointer
as an array of temporary buffers.
Fixes: db809859c8 ("slimbus: qcom: fix incompatible pointer warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the pointer passed to dmam_alloc_coherent seems to be
phys_addr_t * instead of dma_addr_t *. This address will be
used by dma apis, so change this to proper type.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla