Since connectors can be created dynamically, fbdev should be initialized
even if there are no connectors at the moment. Otherwise fbdev will
not be created even after connector's appearance.
The patch fixes lack of fbdev on rinato and trats boards.
Fixes: 6afb7721e2 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSI device can be attached after DRM device is registered. In such
case newly created connector must be registered by exynos_dsi.
The patch fixes exynos_drm on rinato and trats boards.
Fixes: 6afb7721e2 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This reverts commit 0586feba32
This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.
However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.
Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The of_drm_find_panel() function returns error pointers and never NULL
but we the driver assumes that ->panel is NULL when it's not present.
Fixes: 6afb7721e2 ("drm/exynos: move connector creation to attach callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
The mixer hardware supports variable plane alpha. Currently planes are
opaque, make this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The mixer hardware supports both premultiplied alpha and
non-premultiplied alpha. Currently premultiplied alpha is default, make
this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Make use of helper functions in exynos_drm_plane_reset in order to set
all default values. Currently alpha isn't set during reset.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Instead of allocating a fake IOMMU domain for all Exynos DRM components,
simply reuse the default IOMMU domain of the already selected DMA device.
This allows some design changes in IOMMU framework without breaking IOMMU
support in Exynos DRM.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for 16x16 tiled NV12 and NV21 formats.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for 16x16 tiled formats: NV12/NV21, YUYV and YUV420.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed line over 80 characters warning
Signed-off-by: Inki Dae <inki.dae@samsung.com>
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
exynos_drm_fbdev_suspend/resume can be removed
as drm_mode_config_helper_suspend/resume has
implement the same in generic way.
Remove suspend_state from exynos_drm_private
struct as it is no more useful.
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
As the out bridge will not be enabled directly by the framework,
it should be enabled by DSI. exynos_dsi_enable() should handle a case,
when there is an out_bridge connected as a DSI peripheral.
Changed in v5:
- fixed error path in exynos_dsi_enable
Signed-off-by: Maciej Purski <m.purski@samsung.com>
[ a.hajda@samsung.com: v5 ]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current implementation assumes that the only possible peripheral
device for DSIM is a panel. Using an output bridge child device
should also be possible.
If an output bridge is available, don't create a new connector.
Instead, call drm_bridge_attach() and set encoder's bridge to NULL
in order to avoid an out bridge from being visible by the framework, as
the DSI bus needs control on enabling its child output bridge.
Such sequence is required by Toshiba TC358764 bridge, which is a DSI
peripheral bridge device.
changed in v5:
- detach bridge in mipi_dsi detach callback
Signed-off-by: Maciej Purski <m.purski@samsung.com>
[ a.hajda@samsung.com: v5 ]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Manually merged due to merge conflict.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Driver uses bridge_node to refer to bridge on input side of DSI.
Since we want to add support for bridges on output side lets add
"in" prefix to avoid confusion with out bridges.
Changes in v5:
- replace mic_ prefix with in_
Signed-off-by: Maciej Purski <m.purski@samsung.com>
[ a.hajda@samsuung.com: v5 ]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Remove local variable 'priv' to fix GCC warning:
drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize':
drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for
all drivers for the real Exynos DRM hardware modules. This ensures that
the resources will be released for the system PM suspend/resume cycle.
Exynos DRM core already takes care of suspending the whole display pipeline
before PM callbacks of the real devices are called.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In the current code, exynos_drm_suspend() function is called after all
real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM
virtual platform device is created as last device in the system (as
a part of DRM registration). None of the devices for real hardware
modules has its own system suspend/resume callbacks, so it doesn't
change any order of the executed code, but it has a side-effect:
runtime PM callbacks for real devices are not executed, because those
devices are considered by PM core as already suspended. This might
cause issues on boards with complex pipelines, where something
depends on the runtime PM state of the given device.
To ensure that exynos_drm_suspend() is called before any suspend
callback from the real devices, assign it to .prepare callback. Same
for exynos_drm_resume(), using .complete callback ensures that all
real devices have been resumed when calling it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The virtual Exynos DRM device has no runtime PM enabled, so checking
for its runtime suspended state is useless.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use recently introduced common helpers to unify GEM handling code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler
function exynos_drm_gem_get(). This lets the caller to get access to
exynos_drm_gem object and extract any information about GEM object
without searching object tree for getting each parameter.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos G2D driver is the last client of the custom Exynos 'sub-driver'
framework. In the current state it doesn't really resolve any of the
issues it has been designed for, as Exynos DRM is already built only
as a single kernel module. Remove the custom 'sub-driver' framework and
simply use generic component framework also in G2D driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+7bq
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The limit_id_fallback array uses enum drm_ipp_size_id to index its
content. The content itself is of type enum drm_exynos_ipp_limit_type.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The only bits that should be preserved in decon_win_set_fmt() is
WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and
are set by the mentioned function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Set per-plane global alpha to maximum value to get proper blending of
XRGB and ARGB planes. This fixes the strange order of overlapping planes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DMA hardware should respect buffer pitch, so use the width calculated from
the buffer pitch instead of the virtual one.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix following issues related to planar YUV pixel format configuration:
- NV16/61 modes were incorrectly programmed as NV12/21,
- YVU420 was programmed as YUV420 on source,
- YVU420 and YUV422 were programmed as YUV420 on output.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip
were swapped in GScaler driver. Fix this by swapping code for interpreting
them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Investigation revealed that GScaler hardware requires the real buffer width
(pitch) to be aligned to 16 pixels.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DMA hardware should respect buffer pitch, so use the width calculated from
the buffer pitch instead of the virtual one.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Ensure that Scaler hardware is properly reset and interrupts are cleared
before processing next image.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip
were swapped in Rotator driver. Fix this by swapping code for interpreting
them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Prepare a common function for size and scale checks and call it for
source and destination buffers. Then also move there the state-less checks
from exynos_drm_ipp_task_setup_buffer, so the format information is already
available in limits processing. Finally perform the IPP_LIMIT_BUFFER check
on the real width of the buffer (the width calculated from the provided
buffer pitch).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
- It enables hardware overlay number 4 and 5. For this,
this patch series adds required clocks.
Several fixups
- Fix default value of zpos according to real hardware overlay number.
- Fix error value of exynos_Drm_crtc_get_by_type function correctly.
- Fix static checker warning of scaler_task_done function.
- Fix signedness bug in fimc_setup_clocks function.
One cleanup
- Disable framedone interrupt of DSI device which is not required.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Fjd4
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add more HW overlays support
- It enables hardware overlay number 4 and 5. For this,
this patch series adds required clocks.
Several fixups
- Fix default value of zpos according to real hardware overlay number.
- Fix error value of exynos_Drm_crtc_get_by_type function correctly.
- Fix static checker warning of scaler_task_done function.
- Fix signedness bug in fimc_setup_clocks function.
One cleanup
- Disable framedone interrupt of DSI device which is not required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527229919-25665-1-git-send-email-inki.dae@samsung.com
"id" needs to be signed for the error handling to work.
Fixes: 7a2d5c77c5 ("drm/exynos: fimc: Convert driver to IPP v2 core API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The default zpos property for all planes in Exynos DRM was fixed as zero.
Fix this by providing proper value provided by hardware drivers, which
typically matches hardware window number.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Fixes: e47726a11e ("drm/exynos: use generic code for managing zpos plane property")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
EPERM is not the correct error value when the driver is not able to get
its resources. Change it to ENODEV.
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda