ioctl->cmd_drv is pointless and we can just as well stick the full ioctl
definition into ioctl->cmd.
Cc: Jakob Bornecrantz <jakob@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently DRM_IOCTL_DEF_DRV does '[DRM_IOCTL_NR(DRM_##ioctl)]' which
doesn't make much sense since DRM_##ioctl is already a the raw ioctl
number. So change it to 'DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE'
which means the DRM_IOCTL_NR() now makes sense, and also this also means
if there's a mistake in the DRM_IOCTL_##ioctl macros we might get a
warning about it (eg. we would have gotten a sparse warning about the
i915 colorkey get/set ioctl being defined to be the same thing).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With bridges now moving to a separate registry they are no longer DRM
objects, hence this define is no longer needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm-intel-next-2015-03-13-rebased:
- EU count report param for gen9+ (Jeff McGee)
- piles of pll/wm/... fixes for chv, finally out of preliminary hw support
(Ville, Vijay)
- gen9 rps support from Akash
- more work to move towards atomic from Matt, Ander and others
- runtime pm support for skl (Damien)
- edp1.4 intermediate link clock support (Sonika)
- use frontbuffer tracking for fbc (Paulo)
- remove ilk rc6 (John Harrison)
- a bunch of smaller things and fixes all over
Includes backmerge because git rerere couldn't keep up any more.
* tag 'drm-intel-next-2015-03-13-merge' of git://anongit.freedesktop.org/drm-intel: (366 commits)
drm/i915: Make sure the primary plane is enabled before reading out the fb state
drm/i915: Update DRIVER_DATE to 20150313
drm/i915: Fix vmap_batch page iterator overrun
drm/i915: Export total subslice and EU counts
drm/i915: redefine WARN_ON_ONCE to include the condition
drm/i915/skl: Implement WaDisableHBR2
drm/i915: Remove the preliminary_hw_support shackles from CHV
drm/i915: Read CHV_PLL_DW8 from the correct offset
drm/i915: Rewrite IVB FDI bifurcation conflict checks
drm/i915: Rewrite some some of the FDI lane checks
drm/i915/skl: Enable the RPS interrupts programming
drm/i915/skl: Enabling processing of Turbo interrupts
drm/i915/skl: Updated the i915_frequency_info debugfs function
drm/i915: Simplify the way BC bifurcation state consistency is kept
drm/i915/skl: Updated the act_freq_mhz_show sysfs function
drm/i915/skl: Updated the gen9_enable_rps function
drm/i915/skl: Updated the gen6_rps_limits function
drm/i915/skl: Restructured the gen6_set_rps_thresholds function
drm/i915/skl: Updated the gen6_set_rps function
drm/i915/skl: Updated the gen6_init_rps_frequencies function
...
radeon requires this to get the slots for later filling
out a table on every transition.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spell all the PCI IDs out to be able to quickly grep for the IDs. No
functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add GT1/2 to comments to not loose that distinction.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There has been some confusion about this struct. Lack of documentation
probably didn't help.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Older DisplayPort to DVI-D Dual Link adapters designed by Bizlink have bugs
in their I2C over AUX implementation (fixed in newer revisions). They work
fine with Windows, but fail with Linux.
It turns out that they cannot keep an I2C transaction open unless the
previous read was 16 bytes; shorter reads can only be followed by a zero
byte transfer ending the I2C transaction.
Copy Windows's behaviour, and read 16 bytes at a time. If we get a short
reply, assume that there's a hardware bottleneck, and shrink our read size
to match. For this purpose, use the algorithm in the DisplayPort 1.2 spec,
in the hopes that it'll be closest to what Windows does.
Also provide an unsafe module parameter for testing smaller transfer sizes,
in case there are sinks out there that cannot work with Windows.
Note also that despite the previous comment in drm_dp_i2c_xfer, this speeds
up native DP EDID reads; Ville Syrjälä <ville.syrjala@linux.intel.com> found
the following changes in his testing:
Device under test: old -> with this patch
DP->DVI (OUI 001cf8): 40ms -> 35ms
DP->VGA (OUI 0022b9): 45ms -> 38ms
Zotac DP->2xHDMI: 25ms -> 4ms
Asus PB278 monitor: 22ms -> 3ms
A back of the envelope calculation shows that peak theoretical transfer rate
for 1 byte reads is around 60 kbit/s; with 16 byte reads, this increases to
around 500 kbit/s, which explains the increase in speed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55228
Tested-by: Aidan Marks <aidanamarks@gmail.com> (v3)
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.
Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We shouldn't tempt driver writers into using this since it uses a
default format list which is likely wrong. And when that's done we can
simplify the code a bit, too.
Noticed while reviewing a patch from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Both the legacy and atomic helpers need to check whether a plane
supports a given pixel format. The code is currently duplicated, share
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Slightly extend the docbook.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a number of DPCD definitions from eDP 1.4.
v2: s/DP_ALPM_LOCK_TIMEOUT_ERROR_STATUS/DP_ALPM_LOCK_TIMEOUT_ERROR/
(Sonika)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a number of DPCD definitions from DP 1.1 and 1.2a.
v2: drop wrong DP version reference, rename DP training set macros
(Sonika).
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mostly display control related DPCD addresses.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Keep the DPCD macros ordered by address, and make indentation conform to
the rest of the file.
commit e045d20bef
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Thu Feb 19 13:16:44 2015 +0530
drm: Adding edp1.4 specific dpcd macros
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
=Xkue
-----END PGP SIGNATURE-----
Merge tag 'v4.0-rc3' into drm-next
Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get
some mainline bug fixes needed for my testing box
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_display.c
- Y tiling support for scanout from Tvrtko&Damien
- Remove more UMS support
- some small prep patches for OLR removal from John Harrison
- first few patches for dynamic pagetable allocation from Ben Widawsky, rebased
by tons of other people
- DRRS support patches (Sonika&Vandana)
- fbc patches from Paulo
- make sure our vblank callbacks aren't called when the pipes are off
- various patches all over
* tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel: (61 commits)
drm/i915: Update DRIVER_DATE to 20150227
drm/i915: Clarify obj->map_and_fenceable
drm/i915/skl: Allow Y (and Yf) frame buffer creation
drm/i915/skl: Update watermarks for Y tiling
drm/i915/skl: Updated watermark programming
drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
drm/i915/skl: Allow scanning out Y and Yf fbs
drm/i915/skl: Add new displayable tiling formats
drm/i915: Remove DRIVER_MODESET checks from modeset code
drm/i915: Remove regfile code&data for UMS suspend/resume
drm/i915: Remove DRIVER_MODESET checks from gem code
drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
drm/i915: fix a printk format
drm/i915: Add media rc6 residency file to sysfs
drm/i915: Add missing description to parameter in alloc_pt_range
drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
...
Use cases like rotation require these hooks to have some context so they
know how to prepare and cleanup the frame buffer correctly.
For i915 specifically, object backing pages need to be mapped differently
for different rotation modes and the driver needs to know which mapping to
instantiate and which to tear down when transitioning between them.
v2: Made passed in states const. (Daniel Vetter)
[airlied: add mdp5 and atmel fixups]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- use the atomic helpers for plane_upate/disable hooks (Matt Roper)
- refactor the initial plane config code (Damien)
- ppgtt prep patches for dynamic pagetable alloc (Ben Widawsky, reworked and
rebased by a lot of other people)
- framebuffer modifier support from Tvrtko Ursulin, drm core code from Rob Clark
- piles of workaround patches for skl from Damien and Nick Hoath
- vGPU support for xengt on the client side (Yu Zhang)
- and the usual smaller things all over
* tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel: (88 commits)
drm/i915: Update DRIVER_DATE to 20150214
drm/i915: Remove references to previously removed UMS config option
drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
drm/i915/skl: Fix always true comparison in a revision id check
drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
drm/i915: Add process identifier to requests
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
drm/i915/skl: Implement WaDisableHDCInvalidation
drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
drm/i915/skl: Implement WaDisablePartialResolveInVc
drm/i915/skl: Introduce a SKL specific init_workarounds()
drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
drm/i915/skl: Make the init clock gating function skylake specific
drm/i915/skl: Provide a gen9 specific init_render_ring()
drm/i915/skl: Document the WM read latency W/A with its name
drm/i915/skl: Also detect eDRAM on SKL
...
We need to store device offsets in 64 bit as the device
address space may be larger than the CPU's.
Fixes GPU init failures on radeons with 4GB or more of
vram on 32 bit kernels. We put vram at the start of the
GPU's address space so the gart aperture starts at 4 GB
causing all GPU addresses in the gart aperture to get
truncated.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89072
[airlied: fix warning on nouveau build]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: thellstrom@vmware.com
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current implementation is limited by the number of addresses that
fit into an unsigned long. This causes problems on 32-bit Tegra where
unsigned long is 32-bit but drm_mm is used to manage an IOVA space of
4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1
(or 4 GiB - 4 KiB for page granularity).
This commit changes the start and size of the range to be an unsigned
64-bit integer, thus allowing much larger ranges to be supported.
[airlied: fix i915 warnings and coloring callback]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixupo
Adding dpcd macros related to edp1.4 and link rates
v2: Added DP_SUPPORTED_LINK_RATES macros
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With runtime PM the hw might still be off while doing the ->mode_set
callbacks - runtime PM get/put should only happen in the
enable/disable hooks to properly support DPMS. Which essentially makes
these callbacks useless for drivers support runtime PM, so make them
optional. Again motivated by discussions with Laurent.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
These names only make sense because of backwards compatability with
the order used by the crtc helper library. There's not really any real
requirement in the ordering here.
So rename them to something more descriptive and update the kerneldoc
a bit. Motivated in a discussion with Laurent about how to restore
plane state for dpms for drivers with runtime pm.
v2: Squash in fixup from Stephen Rothwell to fix a conflict with
tegra.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Atomic state handling adds a lot of indirection and complexity between
simple updates and drivers. For easier debugging the diagnostic output
is therefore rather chatty. Which is great for tracking down atomic
issues, but really annoying otherwise.
Add a new DRM_DEBUG_ATOMIC to be able to filter this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The CRTC_STEREO_DOUBLE_ONLY define was introduced in commit:
commit ecb7e16bf1
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Mon Dec 1 15:40:09 2014 -0800
drm: add helper to get crtc timings (v5)
but if we want the stereo h/v adjustments, we need to set the
CRTC_STEREO_DOUBLE flag. Otherwise, we'll get the wrong h/v for frame packing
stereo 3d modes.
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.
Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
unitialized.
The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).
So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.
v2: Clarify the code flow slightly as suggested by Ville.
v3: Fix kerneldoc spelling, spotted by Laurent.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.
So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats. Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.
The proposal is to add a per-plane format modifier. This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.
v1: original
v1.5: increase modifier to 64b
v2: Incorporate review comments from the big thread, plus a few more.
- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
they're dealing with old userspace and need to fish out e.g. tiling
from other information.
- After rolling out checks for ->modifier to all drivers I've decided
that this is way too fragile and needs an explicit opt-in flag. So
do that instead.
- Add a define (just for documentation really) for the "NONE"
modifier. Imo we don't need to add mask #defines since drivers
really should only do exact matches against values defined with
fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
sure whether that one is accurate.
v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
properly documented, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We need to have a separate GT3 struct intel_device_info to declare they
have a second VCS. Let's start by splitting the PCI ids per-GT.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We had _power_up(), but drivers also need to be able to power down.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.
In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
for the corresponding bridge so that the bridge receives
drm_device pointer and continues with connector and other
drm initializations.
The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.
The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".
The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.
The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.
drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.
This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The biggest part of these changes is the conversion to atomic mode-
setting. A lot of cleanup and demidlayering was required before the
conversion, with the result being a whole lot of changes.
Besides the atomic mode-setting support, the host1x bus now has the
proper infrastructure to support suspend/resume for child devices.
Finally, a couple of smaller cleanup patches round things off.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJUx1hgAAoJEN0jrNd/PrOhpOIQAI7YAJUX7465R59vkjXOV3uP
lGMj75v22Wq2Y3poPNyxnn562W0feKVBPf13oWgZvzK1fk3+eXoVmL2F395VYXjz
rsGhJJe+/z8gtBgNXH0l6jzvQwRHzLCoMpt9Egrzbij6S+BShQZvnwg5Gyws6vBe
ZnpTjxJKZD4ADY5G1J/EFmBAW3B3abZqOLGHohbUSeN/rr3VP92eG7vnPDW8Rrry
UuBJkjdkR49cfnEvz4pCEoiucftIja7y0YhkDy6estPnO3JBDQ01tCI6HvA6CT1k
6wCkWOnPXJ1Uy1OcXgMU59azJ7d8wdwXFWCXc5yWwIj47ZmY6OjwyJfURmrlQ6nb
8lxeedCBgmTLF6sB9g8g117HWCM3InUXOeN4EhkcF6el9X+ZOAlIJO2RllfL8Bwn
O0GXgCmeeeoZG6aLpULEnAZhJZ92nvo2Zn5lddk7uiaU09Xdzc4kKN3FzYS0XtfJ
7A32m/DNPQi9yJnFFK2sWrrSBnHcDd0Cq17/V1VTcP6iV3CtRWIDX7co0QHE+EQl
7xjj2rlFEyWcvD+9pUoYEgDDCuzjy41zCQ53vj+h2xDO6maksqT1vJ1Nz8y9JmQI
F52aU+DyHleP3q0u9CmeFIo1ft5ho7IgzPJXHPqir/QcnxqiqDprEM70bQwVdF+y
iVvngQ3xfkH2RaqOwen0
=k0/3
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.20-rc1
The biggest part of these changes is the conversion to atomic mode-
setting. A lot of cleanup and demidlayering was required before the
conversion, with the result being a whole lot of changes.
Besides the atomic mode-setting support, the host1x bus now has the
proper infrastructure to support suspend/resume for child devices.
Finally, a couple of smaller cleanup patches round things off.
* tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (54 commits)
drm/tegra: Use correct relocation target offsets
drm/tegra: Add minimal power management
drm/tegra: dc: Unify enabling the display controller
drm/tegra: Track tiling and format in plane state
drm/tegra: Track active planes in CRTC state
drm/tegra: Remove unused ->mode_fixup() callbacks
drm/tegra: Atomic conversion, phase 3, step 3
drm/tegra: Atomic conversion, phase 3, step 2
drm/tegra: dc: Use atomic clock state in modeset
drm/tegra: sor: Implement ->atomic_check()
drm/tegra: hdmi: Implement ->atomic_check()
drm/tegra: dsi: Implement ->atomic_check()
drm/tegra: rgb: Implement ->atomic_check()
drm/tegra: dc: Store clock setup in atomic state
drm/tegra: Atomic conversion, phase 3, step 1
drm/tegra: Atomic conversion, phase 2
drm/tegra: Atomic conversion, phase 1
drm/tegra: dc: Do not needlessly deassert reset
drm/tegra: Output cleanup functions cannot fail
drm/tegra: Remove remnants of the output midlayer
...
This callback can be used instead of the legacy ->mode_fixup() and is
passed the CRTC and connector states. It can thus use these states to
validate the modeset and cache values in the state to be used during
the actual modeset.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to prevent drivers from having to perform the same checks over
and over again, add an optional ->atomic_disable callback which the core
calls under the right circumstances.
v2: pass old state and detect edges to avoid calling ->atomic_disable on
already disabled planes, remove redundant comment (Daniel Vetter)
v3: rename helper to drm_atomic_plane_disabling() to clarify that it is
checking for transitions, move helper to drm_atomic_helper.h, clarify
check for !old_state and its relation to transitional helpers
Here's an extract from some discussion rationalizing the behaviour (for
a full version, see the reference below):
> > Hm, thinking about this some more this will result in a slight difference
> > in behaviour, at least when drivers just use the helper ->reset functions
> > but don't disable everything:
> > - With transitional helpers we assume we know nothing and call
> > ->atomic_disable.
> > - With atomic old_state->crtc == NULL in the same situation right after
> > boot-up, but we asssume the plane is really off and _dont_ call
> > ->atomic_disable.
> >
> > Should we instead check for (old_state && old_state->crtc) and state that
> > drivers need to make sure they don't have stuff hanging around?
>
> I don't think we can check for old_state because otherwise this will
> always return false, whereas we really want it to force-disable planes
> that could be on (lacking any more accurate information). For
> transitional helpers anyway.
>
> For the atomic helpers, old_state will never be NULL, but I'd assume
> that the driver would reconstruct the current state in ->reset().
By the way, the reason for why old_state can be NULL with transitional
helpers is the ordering of the steps in the atomic transition. Currently
the Tegra patches do this (based on your blog post and the Exynos proto-
type):
1) atomic conversion, phase 1:
- implement ->atomic_{check,update,disable}()
- use drm_plane_helper_{update,disable}()
2) atomic conversion, phase 2:
- call drm_mode_config_reset() from ->load()
- implement ->reset()
That's only a partial list of what's done in these steps, but that's the
only relevant pieces for why old_state is NULL.
What happens is that without ->reset() implemented there won't be any
initial state, hence plane->state (the old_state here) will be NULL the
first time atomic state is applied.
We could of course reorder the sequence such that drivers are required
to hook up ->reset() before they can (or at the same as they) hook up
the transitional helpers. We could add an appropriate WARN_ON to this
helper to make that more obvious.
However, that will not solve the problem because it only gets rid of the
special case. We still don't know whether old_state->crtc == NULL is the
current state or just the initial default.
So no matter which way we do this, I don't see a way to get away without
requiring specific semantics from drivers. They would be that:
- drivers recreate the correct state in ->reset() so that
old_state->crtc != NULL if the plane is really enabled
or
- drivers have to ensure that the real state in fact mirrors the
initial default as encoded in the state (plane disabled)
References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no use-case where it would be useful for drivers not to
implement this function and the transitional plane helpers already
require drivers to provide an implementation.
v2: add new requirement to kerneldoc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For historical reasons going all the way back to how the Xrandr code
was implemented the semantics of the callbacks used to enable/disable
crtcs and encoders are ... interesting.
But with atomic helpers all that complexity has been binned, with only
a well-defined on/off action left. Unfortunately the names stuck.
Let's fix that by adding enable/disable hooks every, make them the
preferred variant for atomic and update documentations.
Later on we add debug warnings when drivers have deprecated hooks. But
while everything is in-flight with lots of drivers converting to
atomic that's a bit too much - better wait for things to settle a bit
first.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cursor plane updates have historically been fully async and mutliple
updates batched together for the next vsync. And userspace relies upon
that. Since implementing a full queue of async atomic updates is a bit
of work lets just recover the cursor specific behaviour with a hint
flag and some hacks to drop the vblank wait.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This builds on top of the crtc->active infrastructure to implement
legacy DPMS. My choice of semantics is somewhat arbitrary, but the
entire pipe is enabled as along as one output is still enabled.
Of course it also clamps everything that's not ON to OFF.
v2: Fix spelling in one comment.
v3: Don't do an async commit (Thierry)
v4: Dan Carpenter noticed missing error case handling.
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is the infrastructure for DPMS ported to the atomic world.
Fundamental changes compare to legacy DPMS are:
- No more per-connector dpms state, instead there's just one per each
display pipeline. So if you clone either you have to unclone first
if you only want to switch off one screen, or you just switch of
everything (like all desktops do). This massively reduces complexity
for cloning since now there's no more half-enabled cloned configs to
consider.
- Only on/off, dpms standby/suspend are as dead as real CRTs. Again
reduces complexity a lot.
Now especially for backwards compat the really important part for dpms
support is that dpms on always succeeds (except for hw death and
unplugged cables ofc). Which means everything that could fail (like
configuration checking, resources assignments and buffer management)
must be done irrespective from ->active. ->active is really only a
toggle to change the hardware state. More precisely:
- Drivers MUST NOT look at ->active in their ->atomic_check callbacks.
Changes to ->active MUST always suceed if nothing else changes.
- Drivers using the atomic helpers MUST NOT look at ->active anywhere,
period. The helpers will take care of calling the respective
enable/modeset/disable hooks as necessary. As before the helpers
will carefully keep track of the state and not call any hooks
unecessarily, so still no double-disables or enables like with crtc
helpers.
- ->mode_set hooks are only called when the mode or output
configuration changes, not for changes in ->active state.
- Drivers which reconstruct the state objects in their ->reset hooks
or through some other hw state readout infrastructure must ensure
that ->active reflects actual hw state.
This just implements the core bits and helper logic, a subsequent
patch will implement the helper code to implement legacy dpms with
this.
v2: Rebase on top of the drm ioctl work:
- Move crtc checks to the core check function.
- Also check for ->active_changed when deciding whether a modeset
might happen (for the ALLOW_MODESET mode).
- Expose the ->active state with an atomic prop.
v3: Review from Rob
- Spelling fix in comment.
- Extract needs_modeset helper to consolidate the ->mode_changed ||
->active_changed checks.
v4: Fixup fumble between crtc->state and crtc_state.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Not a new type exposed to userspace, just a standard way to create
them since between range, bitmask and enum there's 3 different ways to
pull out a boolean prop.
Also add the kerneldoc for the recently added new prop types, which
Rob forgot all about.
v2: Fixup kerneldoc, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to 20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)
* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
drm/probe-helper: clamp unknown connector status in the poll work
drm/probe-helper: don't lose hotplug event
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
drm: Make drm_read() more robust against multithreaded races
drm/fb-helper: Propagate errors from initial config failure
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
to make sure we deliver the delayed hoptplug events. Instead just
jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
since using probe helpers for anything dynamic without them
initialized makes them all noops.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r9/P
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring
into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
After switching to using the component interface this API isn't needed
any more.
v2-3: unchanged
v4:
- move the removal of i915_powerwell.h to this patch (Takashi)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Register a component to be used to interface with the snd_hda_intel
driver. This is meant to replace the same interface that is currently
based on module symbol lookup.
v2:
- change roles between the hda and i915 components (Daniel)
- add the implementation to a new file (Jani)
- use better namespacing (Jani)
v3:
- move the implementation to intel_audio.c (Daniel)
- rename display_component to audio_component (Daniel)
- add kerneldoc (Daniel)
v4:
- run forgotten git rm i915_component.c (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for
atomic updates
- fixes and more patches for the seqno to request transformation from John
- docbook for fbc from Rodrigo
- prep work for dual-link dsi from Gaurav Signh
- crc fixes from Ville
- special ggtt views infrastructure from Tvrtko Ursulin
- shadow patch copying for the cmd parser from Brad Volkin
- execlist and full ppgtt by default on gen8, for testing for now
* tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits)
drm/i915: Update DRIVER_DATE to 20141219
drm/i915: Hold runtime PM during plane commit
drm/i915: Organize bind_vma funcs
drm/i915: Organize INSTDONE report for future.
drm/i915: Organize PDP regs report for future.
drm/i915: Organize PPGTT init
drm/i915: Organize Fence registers for future enablement.
drm/i915: tame the chattermouth (v2)
drm/i915: Warn about missing context state workarounds only once
drm/i915: Use true PPGTT in Gen8+ when execlists are enabled
drm/i915: Skip gunit save/restore for cherryview
drm/i915/chv: Use timeout mode for RC6 on chv
drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist
drm/i915: Tidy up execbuffer command parsing code
drm/i915: Mark shadow batch buffers as purgeable
drm/i915: Use batch length instead of object size in command parser
drm/i915: Use batch pools with the command parser
drm/i915: Implement a framework for batch buffer pools
drm/i915: fix use after free during eDP encoder destroying
drm/i915/skl: Skylake also supports DP MST
...
Next batch of atomic work. Most important is the propertification from Rob
and the nth iteration of the actual atomic ioctl originally from Ville.
Big differences compared to earlier revisions:
- Core properties are now fully handled by the core, drivers can only
handle driver-specific properties.
- Atomic props&ioctl are opt-in per file_priv, userspace needs to
explicitly ask for it (like universal plane support).
- For now all hidden behind the atomic module option until this has
settled a bit.
- Atomic modesets are currently not possible since the exact abi for how
to handle the mode property is still under discussion.
Besides this some cleanup patches from me and the addition of per-object
state to global state backpointers to simplify drivers.
* tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel:
drm: Ensure universal_planes is set for atomic
drm/atomic: Hide drm.ko internal interfaces
drm: Atomic modeset ioctl
drm/atomic: atomic connector properties
drm/atomic: atomic plane properties
drm: small property creation cleanup
drm/atomic: atomic_check functions
drm: add atomic properties
drm: refactor getproperties/getconnector
drm: tweak getconnector locking
drm: add atomic_get_property
drm: add atomic_set_property wrappers
drm: get rid of direct property value access
drm: store property instead of id in obj attachment
drm: allow property validation for refcnted props
drm/atomic: Introduce state->obj backpointers
drm/atomic-helper: Again check modeset *before* plane states
drm/atomic-helper: Export both plane and modeset check helpers
Misc drm patches with mostly polish patches from Thierry, with a bit of
generic mode validation from Ville and a few other oddball things.
* tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits)
drm: Include drm_crtc_helper.h in DocBook
drm: Make drm_crtc_helper.h standalone includible
drm: Move IRQ related fields to proper section
drm: Remove stale comment
drm: Do basic sanity checks for user modes
drm: Perform basic sanity checks on probed modes
drm: Reorganize probed mode validation
drm/doc: Remove duplicate "by"
drm/info: Remove unused code
drm/cache: Use wbinvd helpers
drm/plane-helper: Test for plane disable earlier
drm/doc: Document drm_add_modes_noedid() usage
drm: bit of spell-check / editorializing.
drm: Prefer sizeof(type) over sizeof type
drm: Remove useless else block
drm: Remove unneeded braces for single statement blocks
drm: Do not assign in if condition
drm: Prefer kmalloc_array() over kmalloc() with multiply
drm: Prefer kcalloc() over kzalloc() with multiply
drm: Miscellaneous checkpatch whitespace cleanups
...
Add conversion from drm_display_mode to videomode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is just a bit fallout from patch polishing and moving the
get_prop logic fully into the core:
- Drop EXPORT_SYMBOL and make the helpers static.
- Drop kerneldoc since not used by drivers.
- Move the cross-file function declarations only used by drm.ko
internally to an internal header.
v2: keep the gist of the comments, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.
The ioctl simply takes a list of object IDs and property IDs and their
values.
Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)
The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).
v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Expose the core plane state as properties, so they can be updated via
atomic ioctl.
v2: atomic property flag
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 355a701838.
This had some bad side effects under normal operation, and should
have been dropped earlier.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since we won't be using the obj->properties->values[] array to shadow
property values for atomic drivers, we are going to need a vfunc for
getting prop values. Add that along w/ mandatory wrapper fxns.
v2: more comments and copypasta comment typo fix
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we add properties for all the standard plane/crtc/connector
attributes (in preperation for the atomic ioctl), we are going to want
to handle core state in core (rather than per driver). Intercepting the
core properties will be easier if the atomic_set_property vfuncs are not
called directly, but instead have a mandatory wrapper function (which
will later serve as the point to intercept core properties).
v2: more verbose comments and copypasta comment fix
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is already a section that describes the helpers implemented by
this module. Add the kerneldoc-generated structure descriptions to this
section.
While at it, add missing kerneldoc for the structures to avoid warnings
when generating the documentation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The file refers to a bunch of structure declared in drm_crtc.h, so
include it to make sure the drm_crtc_helper.h header can be included
standalone.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The .irq and .irq_enabled fields are part of the VBLANK interrupt
handling infrastructure, so move them to the appropriate section within
the structure.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For atomic drivers, we won't use the values array but instead shunt
things off to obj->atomic_get_property(). So to simplify things make
all read/write of properties values go through the accessors.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Keep property pointer, instead of id, in per mode-object attachments.
This will simplify things in later patches.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Useful since this way we can pass around just the state objects and
will get ther real object, too.
Specifically this allows us to again simplify the parameters for
set_crtc_for_plane.
v2: msm already has it's own specific plane_reset hook, don't forget
that one!
v3: Fixup kerneldoc, reported by 0-day builder.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com> (v2)
Tested-by: Rob Clark <robdclark@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The default call sequence for these two parts won't fit for all
drivers. So export the two pieces and explain with a bit of kerneldoc
when each should be called.
v2: Squash in fixup from Rob to actually add the newly exported
functions to headers
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The struct drm_connector_funcs kerneldoc refers to a part of struct
drm_crtc_funcs that no longer exists.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure the timings of probed modes at least pass some very basic
sanity checks.
The checks include:
- clock,hdisplay,vdisplay are non zero
- sync pulse fits within the blanking period
- htotal,vtotal are big enough
I have not checked all the drivers to see if the modes the generate
might violate these constraints. I'm hoping not, because that would mean
either abandoning the idea of doing this from the core code, or fixing
the drivers.
I'm not entirely sure about limiting the sync pulse to the blanking
period. Intel hardware doesn't support such things, but some other
hardware might. However at least HDMI doesn't allow having sync pulse
edges within the active period, so I'm thinking the check is probably
OK to have in the common code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_mode_validate_size() and drm_mode_validate_flag() deal with a
single mode instead of having each iterate through the mode list.
The hope is that in the future we might be able to share various mode
validation functions between modeset and get_modes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is the KMS native variant of drm_vblank_count(). It takes
a struct drm_crtc * instead of a struct drm_device * and an index of the
CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is the KMS native variant of drm_handle_vblank(). It takes
a struct drm_crtc * instead of a struct drm_device * and an index of the
CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is the KMS native variant of drm_send_vblank_event(). It
takes a struct drm_crtc * instead of a struct drm_device * and an index
of the CRTC.
Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.
v2: remove unneeded ERROR, fix | vs ||
Signed-off-by: Dave Airlie <airlied@redhat.com>
This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.
The contents of the blob is ABI.
v2: add property + function documentation.
v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.
v2: add missing signoff, add new connector bits to docs.
v3: remove some debugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Logical ports are never going to have EDID changes,
they are used for the internal ports on MST monitors.
We cache the EDIDs from these to save time at MST probe.
v2: drop misplace tile property line, meant for other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.
DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.
v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.
v3: fix missing unlock.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.
Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were
previously making adjustments for doublescan modes and vscan > 1 modes,
which was incorrect. Using our new helper fixes this mistake.
v2 (by Matt): Use new stereo doubling function (suggested by Ville)
v3 (by Matt):
- Add missing kerneldoc (Daniel)
- Use drm_mode_copy() (Jani)
v4 (by Matt):
- Drop stereo doubling function again; add 'stereo only' flag
to drm_mode_set_crtcinfo() instead (Ville)
v5 (by Matt):
- Note behavioral change in drm_crtc_check_viewport() and
intel_modeset_pipe_config(). (Ander)
- Describe new adjustment flags in drm_mode_set_crtcinfo()'s
kerneldoc. (Ander)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds an optional list_head parameter to ttm_eu_reserve_buffers.
If specified duplicates in the execbuf list are no longer reported as errors,
but moved to this list instead.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So here's a pile of atomic fixes and improvements from various people.
There's still more patches in-flight, so I think I'll keep collecting them
in a separate branch.
* tag 'topic/core-stuff-2014-11-28' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: clear plane's CRTC and FB when shutting down
drm: Handle atomic state properly in kms getfoo ioctl
drm: use mode_object_find helpers
drm: fix indentation
drm/msm: switch to atomic-helpers iterator macros
drm/atomic: add plane iterator macros
drm/atomic: track bitmask of planes attached to crtc
drm: Free atomic state during cleanup
drm: Make drm_atomic.h standalone includible
drm: Make drm_atomic_helper.h standalone includible
drm/plane: Add missing kerneldoc
drm/plane: Pass old state to ->atomic_update()
drm/atomic_helper: Cope with plane->crtc == NULL in disable helper
drm/atomic: Drop per-plane locking TODO
drm/atomic-helper: Skip vblank waits for unchanged fbs
drm: Document that drm_dev_alloc doesn't need a parent
Add helper macros to iterate the current, or incoming set of planes
attached to a crtc. These helpers are only available for drivers
converted to use atomic-helpers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup from Rob to move the planemask iterator to
drm_crtc.h and document it. That one is needed by the atomic ioctl so
can't be in a helper library.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chasing plane->state->crtc of planes that are *not* part of the same
atomic update is racy, making it incredibly awkward (or impossible) to
do something simple like iterate over all planes and figure out which
ones are attached to a crtc.
Solve this by adding a bitmask of currently attached planes in the
crtc-state.
Note that the transitional helpers do not maintain the plane_mask. But
they only support the legacy ioctls, which have sufficient brute-force
locking around plane updates that they can continue to loop over all
planes to see what is attached to a crtc the old way.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet:
- Drop comments about locking in set_crtc_for_plane since they're a
bit misleading - we already should hold lock for the current crtc.
- Also WARN_ON if get_state on the old crtc fails since that should
have been done already.
- Squash in fixup to check get_plane_state return value, reported by
Dan Carpenter and acked by Rob Clark.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm_get_edid() function performs direct I2C accesses to read EDID
blocks, assuming that the monitor DDC interface is directly connected to
the I2C bus. It can't thus be used with HDMI encoders that control the
DDC bus and expose EDID blocks through a different interface.
Refactor drm_do_get_edid() to take a block read callback function
instead of an I2C adapter, and export it for direct use by drivers.
As in the general case the DDC bus is accessible by the kernel at the
I2C level, drivers must make all reasonable efforts to expose it as an
I2C adapter and use drm_get_edid() instead of abusing this function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This header file makes use of a bunch of structures declared in the
drm_crtc.h header file. Include that to make sure the drm_atomic.h
header can be included standalone.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This header uses a bunch of declarations from the drm/drm_crtc.h header,
so make sure to include that as well so that drm_atomic_helper.h can be
included standalone.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The plane helpers aren't pulled into the DocBook yet, so these weren't
noticed.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In most situations it will be useful to have the old state passed to the
->atomic_update() callback. For example if a plane is being disabled the
new state's .crtc field will be NULL, but some drivers may rely on this
field to program the CRTCs registers.
v2: rename variable to old_plane_state and remove redundant comment as
suggested by Daniel Vetter, remove an Exynos hunk that doesn't apply to
drm-next and add a hunk for pending MSM mdp5 changes
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It happens on occasion that developers of generic user-space applications
abuse the dumb buffer API to get hold of drm buffers that they can both
mmap() and use for GPU acceleration, using the assumptions that dumb buffers
and buffers available for GPU are
a) The same type and can be aribtrarily type-casted.
b) fully coherent.
This patch makes the most widely used drivers warn nicely when that happens,
the next step will be to fail.
v2: Move drmP.h changes to drm_gem.h. Fix Radeon dumb mmap breakage.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.
Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.
So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.
v2: Squash in fixup from Rob to remove now unused variables.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.
So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QZIW
-----END PGP SIGNATURE-----
Merge tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
drm/cma: Remove call to drm_gem_free_mmap_offset()
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
drm/rcar: gem: dumb: pitch is an output
drm/omap: gem: dumb: pitch is an output
drm/cma: Introduce drm_gem_cma_dumb_create_internal()
drm/doc: Add GEM/CMA helpers to kerneldoc
drm/doc: mm: Fix indentation
drm/gem: Fix a few kerneldoc typos
Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.
v2: rename properties to be more consistent.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=OUaP
-----END PGP SIGNATURE-----
Merge tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Miscellaneous fixes for v3.19-rc1
This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.
* tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
video/hdmi: Relicense header under MIT license
drm/gma500: mdfld: Reuse video/mipi_display.h
drm: Make drm_mode_create_tv_properties() signature consistent
drm: Implement drm_get_pci_dev() dummy for !PCI
drm/prime: Use unsigned type for number of pages
drm/gem: Fix typo in kerneldoc
drm: Use const data when creating blob properties
drm: Use size_t for blob property sizes
This contains support for a couple of new panels, updates for some GPIO
API changes and a bunch of updates to the MIPI DSI support that should
make it easier to write panel drivers in the future.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+xMK
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm/panel: Changes for v3.19-rc1
This contains support for a couple of new panels, updates for some GPIO
API changes and a bunch of updates to the MIPI DSI support that should
make it easier to write panel drivers in the future.
* tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (31 commits)
drm/panel: Add Sharp LQ101R1SX01 support
drm/dsi: Do not require .owner field to be set
drm/dsi: Resolve MIPI DSI device from phandle
drm/dsi: Implement DCS set_{column,page}_address commands
drm/dsi: Implement DCS {get,set}_pixel_format commands
drm/dsi: Implement DCS get_power_mode command
drm/dsi: Implement DCS soft_reset command
drm/dsi: Implement DCS nop command
drm/dsi: Add to DocBook documentation
drm/dsi: Implement some standard DCS commands
drm/dsi: Implement generic read and write commands
drm/panel: s6e8aa0: Use standard MIPI DSI function
drm/dsi: Add mipi_dsi_set_maximum_return_packet_size() helper
drm/dsi: Constify mipi_dsi_msg
drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
drm/dsi: Add DSI transfer helper
drm/dsi: Add message to packet translator
drm/dsi: Introduce packet format helpers
drm/panel: s6e8aa0: Fix build warnings on 64-bit
drm/panel: ld9040: Fix build warnings on 64-bit
...
Now that we're using lists instead of kfifo to store drm flip-work tasks
we do not need the size parameter passed to drm_flip_work_init function
anymore.
Moreover this function cannot fail anymore, we can thus remove the return
code.
Modify drm_flip_work_init users to take account of these changes.
[airlied: fixed two unused variable warnings]
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make use of lists instead of kfifo in order to dynamically allocate
task entry when someone require some delayed work, and thus preventing
drm_flip_work_queue from directly calling func instead of queuing this
call.
This allow drm_flip_work_queue to be safely called even within irq
handlers.
Add new helper functions to allocate a flip work task and queue it when
needed. This prevents allocating data within irq context (which might
impact the time spent in the irq handler).
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drivers now no longer need to set the .owner field. It will be
automatically set at registration time.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a function, of_find_mipi_dsi_device_by_node(), that can be used to
resolve a phandle to a MIPI DSI device.
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide small convenience wrappers to set the column and page extents of
the frame memory accessed by the host processors.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide small convenience wrappers to query or set the pixel format used
by the interface.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide a small convenience wrapper that transmits a DCS get_power_mode
command. A set of bitmasks for the mode bits is also provided.
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide a small convenience wrapper that transmits a DCS soft_reset
command.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide a small convenience wrapper that transmits a DCS nop command.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Integrate the MIPI DSI helpers into DocBook and clean up various
kerneldoc warnings. Also add a brief DOC section and clarify some
aspects of the mipi_dsi_host struct's .transfer() operation.
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add helpers for the {enter,exit}_sleep_mode, set_display_{on,off} and
set_tear_{on,off} DCS commands.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[treding: kerneldoc and other minor cleanup]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement generic read and write commands. Selection of the proper data
type for packets is done automatically based on the number of parameters
or payload length.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function can be used to set the maximum return packet size for a
MIPI DSI peripheral.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[treding: endianess, kerneldoc, return value]
Signed-off-by: Thierry Reding <treding@nvidia.com>
struct mipi_dsi_msg is a read-only structure, drivers should never need
to modify it. Make this explicit by making all references to the struct
const.
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently the mipi_dsi_dcs_write() function requires the DCS command
byte to be embedded within the write buffer whereas mipi_dsi_dcs_read()
has a separate parameter. Make them more symmetrical by adding an extra
command parameter to mipi_dsi_dcs_write().
The S6E8AA0 driver relies on the old asymmetric API and there's concern
that moving to the new API may be less efficient. Provide a new function
with the old semantics for those cases and make the S6E8AA0 driver use
it instead.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit introduces a new function, mipi_dsi_create_packet(), which
converts from a MIPI DSI message to a MIPI DSI packet. The MIPI DSI
packet is as close to the protocol described in the DSI specification as
possible and useful in drivers that need to write a DSI packet into a
FIFO to send a message off to the peripheral.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add two helpers, mipi_dsi_packet_format_is_{short,long}(), that help in
determining the format of a packet.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is similar to drm_gem_cma_dumb_create() but targetted at
kernel internal users so that they can override the pitch and size
requirements of the dumb buffer.
It is important to make this difference because the IOCTL says that the
pitch and size fields are to be considered outputs and therefore should
not be used in computations of the framebuffer size. Internal users may
still want to use this code to avoid duplication and at the same time
pass on additional, driver-specific restrictions on the pitch and size.
While at it, convert the R-Car DU driver, the single user that overrides
the pitch, to use the new internal helper.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Most of the functions already have the beginnings of kerneldoc comments
but are using the wrong opening marker. Use the correct opening marker
and flesh out the comments so that they can be integrated with the DRM
DocBook document.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The prototype and the function implementation differ in their signature.
Make them consistent and use an unsigned integer for the number of modes
while at it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implementing a dummy of this function allows drivers that use it to be
built on platforms that don't have PCI. This can happen for example if
the nouveau driver is built on Tegra without PCI enabled (or on 64-bit
ARM where PCI is not yet implemented).
Signed-off-by: Thierry Reding <treding@nvidia.com>
The number of pages can never be negative, so an unsigned type is
enough. This also matches the type of the n_pages argument of the
sg_alloc_table_from_pages() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Creating a blob property will always copy the input data so the data
that is passed in can be const.
Signed-off-by: Thierry Reding <treding@nvidia.com>
size_t is the standard type when dealing with sizes of all kinds. Use it
consistently when instantiating DRM blob properties.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:
- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
justification as for the equivalent change in drm_crtc_init done in
commit d0fa1af40e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 8 09:02:49 2014 +0200
drm: Drop modeset locking from crtc init function
Without these the drm_modeset_lock_init would fall over the exact
same way.
- Since the atomic core code wraps the locking switching it to
per-plane locks was a one-line change.
- For the legacy ioctls add a plane argument to the locking helper so
that we can grab the right plane lock (cursor or primary). Since the
universal cursor plane might not be there, or someone really crazy
might forgoe the primary plane even accept NULL.
- Add some locking WARN_ON to the atomic helpers for good paranoid
measure and to check that it all works out.
Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.
v2: I've forgotten about the load-detect code in i915.
v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to
commit 21e88620aa
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Oct 30 13:39:04 2014 -0400
drm/vmwgfx: fix lock breakage
Rebased and fix this up.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v1: original
v2: danvet's kerneldoc nitpicks
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUX/DqAAoJEHm+PkMAQRiGLtQH/iAt3fRHlYDXjaJian/KG1Cb
wVP0I+HWZmvVmmd0PzyaxCZLgRNwdmmYHEH4QLy2JwZ3jZfFHlxhy+hDWCgz+67t
bIzkLs0Pf1T4kJ2+r8qW2kBEz9PWJHGTQw7NTqZ++Ts3rPptBA6Fg4mEJ6fQigXy
qRIY68DpipUkXV9BWBWijnTmrvP5tt7JtPzBr4DC8frMjvWct8+XwYhc2k2tEv2j
LwLYb1OW6PUpPv2BQBfWjqqH77vYNQVhJwuwGcDe2YZdI0UFkDheL24+RbbPcZ4f
OnrLjJSSgzv6lBWkAaXZK7/WJ/JZbXxEqHzWZQ3xXoQov97bm7lEYJqqi5gDasQ=
=6Qpa
-----END PGP SIGNATURE-----
Merge tag 'v3.18-rc4' into drm-next
backmerge to get vmwgfx locking changes into next as the
conflict with per-plane locking.
So here's my atomic series, finally all debugged&reviewed. Sean Paul has
done a full detailed pass over it all, and a lot of other people have
commented and provided feedback on some parts. Rob Clark also converted
msm over the w/e and seems happy. The only small thing is that Rob wants
to export the wait_for_vblank, which imo makes sense. Since there's other
stuff still to do I think we should apply Rob's patch (once it has grown
appropriate kerneldoc) later on top of this.
This is just the core<->driver interface plus a big pile of helpers. Short
recap of the main ideas:
- There are essentially three helper libraries in this patch set:
* Transitional helpers to use the new plane callbacks for legacy plane
updates and in the crtc helper's ->mode_set callback. These helpers are
only temporarily used to convert drivers to atomic, but they allow a
nice separation between changing the driver backend and switching to
the atomic commit logic.
* Legacy helpers to implement all the legacy driver entry points
(page_flip, set_config, plane vfuncs) on top of the new atomic driver
interface. These are completely driver agnostic. The reason for having
the legacy support as helpers is that drivers can switch step-by-step.
And they could e.g. even keep the legacy page_flip code around for some
old platforms where converting to full-blown atomic isn't worth it.
* Atomic helpers which implement the various new ->atomic_* driver
interfaces in terms of the revised crtc helper and new plane helper
hooks.
- The revised crtc helper implemenation essentially implements all the
lessons learned in the i915 modeset rework (when using the atomic helpers
only):
* Enable/disable sequence for a given config are always the same and
callbacks are always called in the same order. This contrast starkly
with the crtc helpers, where the sequence of operations is heavily
dependent on the previous config.
One corollary of this is that if the configuration of a crtc only
partially changes (e.g. a connector moves in a cloned config) the
helper code will still disable/enable the full display pipeline. This
is the only way to ensure that the enable/disable sequence is always
the same.
* It won't call disable or enable hooks more than once any more because
it lost track of state, thanks to the atomic state tracking. And if
drivers implement the ->reset hook properly (by either resetting the hw
or reading out the hw state into the atomic structures) this even
extends to the hardware state. So no more disable-me-harder kind of
nonsense.
* The only thing missing is the hw state readout/cross-check support, but
if drivers have hw state readout support in their ->reset handlers it's
simple to extend that to cross-check the hw state.
* The crtc->mode_set callback is gone and its replacement only sets crtc
timings and no longer updates the primary plane state. This way we can
finally implement primary planes properly.
- The new plane helpers should be suitable enough for pretty much
everything, and a perfect fit for hardware with GO bits. Even if they
don't fit the atomic helper library is rather flexible and exports all
the functions for the individual steps to drivers. So drivers can pick
what matches and implement their own magic for everything else.
- A big difference compared to all previous atomic series is that this one
doesn't implement async commit in a generic way. Imo driver requirements
for that are too diverse to create anything reasonable sane which would
actually work on a reasonable amount of different drivers. Also, we've
never had a helper library for page_flips even, so it's really hard to
know what might work and what's stupid without a bit of experience in the form
of a few driver implementations.
I think with the current flexibility for drivers to pick individual
stages and existing helpers like drm_flip_queue it's rather easy though
to implement proper async commit.
- There's a few other differences of minor importance to earlier atomic
series:
* Common/generic properties are parsed in the callers/core and not in
drivers, and passed to drivers by directly setting the right members in
atomic state structures. That greatly simplifies all the transitional
and legacy helpers an removes a lot of boilerplate code.
* There's no crazy trylock mode used for the async commit since these
helpers don't do async commit. A simple ordered flip queue of atomic
state updates should be sufficient for preventing concurrent hw access
anyway, as long as synchronous updates stall correctly with e.g.
flush_work_queue or similar function. Abusing locks to enforce ordering
isn't a good idea imo anyway.
* These helpers reuse the existing ->mode_fixup hooks in the atomic_check
callback. Which means that drivers need to adapat and move a lot less code
into their atomic_check callbacks.
Now this isn't everything needed in the drm core and helpers for full
atomic support. But it's enough to start with converting drivers, and
except for actually testing multiplane and multicrtc updates also enough to
implement full atomic updates. Still missing are:
- Per-plane locking. Since these helpers here encapsulate the locking
completely this should be fairly easy to implement.
- fbdev support for atomic_check/commit, so that multi-pipe finally works
sanely in fbcon.
- Adding and decoding shared/core properties. That just needs to be rebased
from Rob's latest patch series, with minor adjustments so that the
decoding happens in the core instead of in drivers.
- Actually adding the atomic ioctl. Again just rebasing Rob's latest patch
should be all that's needed.
- Resolving how to deal with DPMS in atomic. Atomic is a good excuse to fix up
the crazy semantics dpms currently has. I'm floating an RFC about this topic
already.
- Finally I couldn't test connector/encoder stealing properly since my test
vehicle here doesn't allow a connector on different crtcs. So drivers
which support this might see some surprises in that area. There is no semantic
change though in how encoder stealing and assignment works (or at least no
intended one), so I think the risk is minimal.
As just mentioned I've done a fake conversion of an existing driver using
crtc helpers to debug the helper code and validate the smooth transition
approach. And that smooth transition was the really big motivation for
this. It seems to actually work and consists of 3 phases:
Phase 1: Rework driver backend for crtc/plane helpers
The requirement here is that universal plane support is already implement. If
universal plane support isn't implement yet it might be better though to just do
it as part of this phase, directly using the new plane helpers. There are two
big things to do:
- Split up the existing ->update/disable_plane hooks into check/commit
hooks and extract the crtc-wide prep/flush parts (like setting/clearing
GO bits).
- The other big change is to split the crtc->mode_set hook into the plane
update (done using the plane helpers) and the crtc setup in a new
->mode_set_nofb hook.
When phase 1 is complete the driver implements all the new callbacks which
push the software state into hardware, but still using all the legacy entry
points and crtc helpers. The transitional helpers serve as impendance
mismatch here.
Phase 2: Rework state handling
This consists of rolling out the state handling helpers for planes, crtcs
and connectors and reviewing all ->mode_fixup and similar hooks to make
sure they don't depend upon implicit global state which might change in the
atomic world. Any such code must be moved into ->atomic_check functions which
just rely on the free-standing atomic state update structures.
This phase also adds a few small pieces of fixup code to make sure the
atomic state doesn't get out of sync in the legacy driver callbacks.
Phase 3: Roll out atomic support
Now it's just about replacing vfuncs with the ones provided by the helper
and filling out the small missing pieces (like atomic_check logic or async
commit support needed for page_flips). Due to the prep work in phase 1 no
changes to the driver backend functions should be required, and because of
the prep work in phase 2 atomic implementations can be rolled out
step-by-step. So if async commit ins't implemented yet page_flip can be
implemented with the legacy functions without wreaking havoc in the other
operations.
* tag 'topic/atomic-helpers-2014-11-09' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: Refcounting for plane_state->fb
drm: Docbook integration and over sections for all the new helpers
drm/atomic-helpers: functions for state duplicate/destroy/reset
drm/atomic-helper: implement ->page_flip
drm/atomic-helpers: document how to implement async commit
drm/atomic: Integrate fence support
drm/atomic-helper: implementatations for legacy interfaces
drm: Atomic crtc/connector updates using crtc/plane helper interfaces
drm/crtc-helper: Transitional functions using atomic plane helpers
drm/plane-helper: transitional atomic plane helpers
drm: Add atomic/plane helpers
drm: Global atomic state handling
drm: Add atomic driver interface definitions for objects
drm/modeset_lock: document trylock_only in kerneldoc
drm: fixup kerneldoc in drm_crtc.h
drm: Pull drm_crtc.h into the kerneldoc template
drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.h
Just various stuff all over from a bunch of people. Shortlog gives a beter
overview, it's really all misc drm patches.
* tag 'topic/core-stuff-2014-11-05' of git://anongit.freedesktop.org/drm-intel:
drm/edid: add #defines and helpers for ELD
drm/dp: Add counters in the drm_dp_aux struct for I2C NACKs and DEFERs
drm: Remove compiler BUG_ON() test
drm: Fix DRM_FORCE_ON_DIGITAL use
drm/gma500: Don't destroy DRM properties in the driver
drm/i915: Don't destroy DRM properties in the driver
drm: Add a note to drm_property_create() about property lifetime
gpu: drm: Fix warning caused by a parameter description in drm_crtc.c
drm/dp-helper: Move the legacy helpers to gma500
drm/crtc: Remove duplicated ioctl code
drm/crtc: Fix two typos
gpu:drm: Fix typo in Documentation/DocBook/drm.xml
gpu: drm: drm_dp_mst_topology.c: Fix improper use of strncat
drm: drm_err: Remove unnecessary __func__ argument
drm: Implement O_NONBLOCK support on /dev/dri/cardN
So my original plan was that the drm core refcounts framebuffers like
with the legacy ioctls. But that doesn't work for a bunch of reasons:
- State objects might live longer than until the next fb change
happens for a plane. For example delayed cleanup work only happens
_after_ the pageflip ioctl has completed. So this definitely doesn't
work without the plane state holding its own references.
- The other issue is transition from legacy to atomic implementations,
where the driver works under a mix of both worlds. Which means
legacy paths might not properly update the ->fb pointer under
plane->state->fb. Which is a bit a problem when then someone comes
around and _does_ try to clean it up when it's long gone.
The second issue is just a bit a transition bug, since drivers should
update plane->state->fb in all the paths that aren't converted yet.
But a bit more robustness for the transition can't hurt - we pull
similar tricks with cleaning up the old fb in the transitional helpers
already.
The pattern for drivers that transition is
if (plane->state)
drm_atomic_set_fb_for_plane(plane->state, plane->fb);
inserted after the fb update has logically completed at the end of
->set_config (or ->set_base/mode_set if using the crtc helpers),
->page_flip, ->update_plane or any other entry point which updates
plane->fb.
v2: Update kerneldoc - copypasta fail.
v3: Fix spelling in the commit message (Sean).
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The atomic users and helpers assume that there is always a obj->state
structure around. Which means drivers need to somehow create that at
driver load time. Also it should obviously reset hardware state, so
needs to be reset upon resume.
Finally the destroy/duplicate_state functions are an awful lot of
boilerplate if the driver doesn't need anything beyond the default
state objects.
So add helper functions for all of this.
v2: Somehow the plane/connector versions got lost in the first
version.
v3: Add kerneldoc.
v4: Make duplicate_state functions a bit more robust, which is useful
for debugging state tracking issues when transitioning to atomic.
v5: Clear temporary variables in the crtc state when duplicating it,
like ->mode_changed or ->planes_changed. If we don't do this stale
values for these might pollute the next atomic modeset.
v6: Also clear crtc_state->event in case the driver didn't (yet) clear
this out.
v7: Split out wrong squashed commit. Also improve the kerneldoc to
mention that obj->state can be NULL and when. Both suggested by
Daniel Thompson.
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently there is no way to implement async flips using atomic, that
essentially requires us to be able to cancel pending requests
mid-flight.
To be able to do that (and I guess we want this since vblank synced
updates which opportunistically cancel still pending updates seem to be
wanted) we'd need to add a mandatory cancellation mode. Depending upon
the exact semantics we decide upon that could mean that userspace will
not get completion events, or will get them all stacked up.
So reject async updates for now. Also async updates usually means not
vblank synced at all, and I guess for drivers which want to support
this they should simply add a special pageflip handler (since usually
you need a special flip cmd to achieve this). That kind of async flip
is pretty much exclusively just used for games and benchmarks where
dropping just one frame means you'll get a headshot or something bad
like that ... And so slight amounts of tearing is acceptable.
v2: Fixup kerneldoc, reported by Paulo.
v3: Use the set_crtc_for_plane function to assign the crtc, since
otherwise the book-keeping is off.
v4: Update crtc->primary->fb since ->page_flip is the only driver
callback where the core won't do this itself. We might want to fix
this inconsistency eventually.
v5: Use set_crtc_for_connector as suggested by Sean.
v6: Daniel Thompson noticed that my error handling is inconsistent
and that in a few cases I didn't handle fatal errors (i.e. not
-EDEADLK). Fix this by consolidate the ww mutex backoff handling
into one check in the fail: block and flatten the error control
flow everywhere else.
v7: Fix spelling mistake in the commit message (Sean).
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch is for enabling async commits. It replaces an earlier
approach which added an async boolean paramter to the ->prepare_fb
callbacks. The idea is that prepare_fb picks up the right fence to
synchronize against, which is then used by the synchronous commit
helper. For async commits drivers can either register a callback to
the fence or simply do the synchronous wait in their async work queue.
v2: Remove unused variable.
v3: Only wait for fences after the point of no return in the part
of the commit function which can be run asynchronously. This is after
the atomic state has been swapped in, hence now check
plane->state->fence.
Also add a WARN_ON to make sure we don't try to wait on a fence when
there's no fb, just as a sanity check.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Well, except page_flip since that requires async commit, which isn't
there yet.
For the functions which changes planes there's a bit of trickery
involved to keep the fb refcounting working. But otherwise fairly
straight-forward atomic updates.
The property setting functions are still a bit incomplete. Once we
have generic properties (e.g. rotation, but also all the properties
needed by the atomic ioctl) we need to filter those out and parse them
in the helper. Preferrably with the same function as used by the real
atomic ioctl implementation.
v2: Fixup kerneldoc, reported by Paulo.
v3: Add missing EXPORT_SYMBOL.
v4: We need to look at the crtc of the modeset, not some random
leftover one from a previous loop when udpating the connector->crtc
routing. Also push some local variables into inner loops to avoid
these kinds of bugs.
v5: Adjust semantics - drivers now own the atomic state upon
successfully synchronous commit.
v6: Use the set_crtc_for_plane function to assign the crtc, since
otherwise the book-keeping is off.
v7:
- Improve comments.
- Filter out the crtc of the ->set_config call when recomputing
crtc_state->enabled: We should compute the same state, but not doing
so will give us a good chance to catch bugs and inconsistencies -
the atomic helper's atomic_check function re-validates this again.
- Fix the set_config implementation logic when disabling the crtc: We
still need to update the output routing to disable all the
connectors properly in the state. Caught by the atomic_check
functions, so at least that part worked ;-) Also add some WARN_ONs
to ensure ->set_config preconditions all apply.
v8: Fixup an embarrassing h/vdisplay mixup.
v9: Shuffled bad squash to the right patch, spotted by Daniel
v10: Use set_crtc_for_connector as suggested by Sean.
v11: Daniel Thompson noticed that my error handling is inconsistent
and that in a few cases I didn't handle fatal errors (i.e. not
-EDEADLK). Fix this by consolidate the ww mutex backoff handling
into one check in the fail: block and flatten the error control
flow everywhere else.
v12: Review and discussion with Sean:
- One spelling fix.
- Correctly skip the crtc from the set_config set when recomputing
->enable state. That should allow us to catch any bugs in higher
levels in computing that state (which is supplied to the
->set_config implementation). I've screwed this up and Sean spotted
that the current code is pointless.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So this is finally the integration of the crtc and plane helper
interfaces into the atomic helper functions.
In the check function we now have a few steps:
- First we update the output routing and figure out which crtcs need a
full mode set. Suitable encoders are selected using ->best_encoder,
with the same semantics as the crtc helpers of implicitly disabling
all connectors currently using the encoder.
- Then we pull all other connectors into the state update which feed
from a crtc which changes. This must be done do catch mode changes
and similar updates - atomic updates are differences on top of the
current state.
- Then we call all the various ->mode_fixup to compute the adjusted
mode. Note that here we have a slight semantic difference compared
to the crtc helpers: We have not yet updated the encoder->crtc link
when calling the encoder's ->mode_fixup function. But that's a
requirement when converting to atomic since we want to prepare the
entire state completely contained with the over drm_atomic_state
structure. So this must be carefully checked when converting drivers
over to atomic helpers.
- Finally we do call the atomic_check functions on planes and crtcs.
The commit function is also quite a beast:
- The only step that can fail is done first, namely pinning the
framebuffers. After that we cross the point of no return, an async
commit would push all that into the worker thread.
- The disabling of encoders and connectors is a bit tricky, since
depending upon the final state we need to select different crtc
helper functions.
- Software tracking is a bit clarified compared to the crtc helpers:
We commit the software state before starting to touch the hardware,
like crtc helpers. But since we just swap them we still have the old
state (i.e. the current hw state) around, which is really handy to
write simple disable functions. So no more
drm_crtc_helper_disable_all_unused_functions kind of fun because
we're leaving unused crtcs/encoders behind. Everything gets shut
down in-order now, which is one of the key differences of the i915
helpers compared to crtc helpers and a really nice additional
guarantee.
- Like with the plane helpers the atomic commit function waits for one
vblank to pass before calling the framebuffer cleanup function.
Compared to Rob's helper approach there's a bunch of upsides:
- All the interfaces which can fail are called in the ->check hook
(i.e. ->best_match and the various ->mode_fixup hooks). This means
that drivers can just reuse those functions and don't need to move
everything into ->atomic_check callbacks. If drivers have no need
for additional constraint checking beyong their existing crtc
helper callbacks they don't need to do anything.
- The actual commit operation is properly stage: First we prepare
framebuffers, which can potentially still fail (due to memory
exhausting). This is important for the async case, where this must
be done synchronously to correctly return errors.
- The output configuration changes (done with crtc helper functions)
and the plane update (using atomic plane helpers) are correctly
interleaved: First we shut down any crtcs that need changing, then
we update planes and finally we enable everything again. Hardware
without GO bits must be more careful with ordering, which this
sequence enables.
- Also for hardware with shared output resources (like display PLLs)
we first must shut down the old configuration before we can enable
the new one. Otherwise we can hit an impossible intermediate state
where there's not enough PLLs (which is the point behind atomic
updates).
v2:
- Ensure that users of ->check update crtc_state->enable correctly.
- Update the legacy state in crtc/plane structures. Eventually we want
to remove that, but for now the drm core still expects this (especially
the plane->fb pointer).
v3: A few changes for better async handling:
- Reorder the software side state commit so that it happens all before
we touch the hardware. This way async support becomes very easy
since we can punt all the actual hw touching to a worker thread. And
as long as we synchronize with that thread (flushing or cancelling,
depending upon what the driver can handle) before we commit the next
software state there's no need for any locking in the worker thread
at all. Which greatly simplifies things.
And as long as we synchronize with all relevant threads we can have
a lot of them (e.g. per-crtc for per-crtc updates) running in
parallel.
- Expose pre/post plane commit steps separately. We need to expose the
actual hw commit step anyway for drivers to be able to implement
asynchronous commit workers. But if we expose pre/post and plane
commit steps individually we allow drivers to selectively use atomic
helpers.
- I've forgotten to call encoder/bridge ->mode_set functions, fix
this.
v4: Add debug output and fix a mixup between current and new state
that resulted in crtcs not getting updated correctly. And in an
Oops ...
v5:
- Be kind to driver writers in the vblank wait functions.. if thing
aren't working yet, and vblank irq will never come, then let's not
block forever.. especially under console-lock.
- Correctly clear connector_state->best_encoder when disabling.
Spotted while trying to understand a report from Rob Clark.
- Only steal encoder if it actually changed, otherwise hilarity ensues
if we steal from the current connector and so set the ->crtc pointer
unexpectedly to NULL. Reported by Rob Clark.
- Bail out in disable_outputs if an output currently doesn't have a
best_encoder - this means it's already disabled.
v6: Fixupe kerneldoc as reported by Paulo. And also fix up kerneldoc
in drm_crtc.h.
v7: Take ownership of the atomic state and clean it up with
drm_atomic_state_free().
v8 Various improvements all over:
- Polish code comments and kerneldoc.
- Improve debug output to make sure all failure cases are logged.
- Treat enabled crtc with no connectors as invalid input from userspace.
- Don't ignore the return value from mode_fixup().
v9:
- Improve debug output for crtc_state->mode_changed.
v10:
- Fixup the vblank waiting code to properly balance the vblank_get/put
calls.
- Better comments when checking/computing crtc->mode_changed
v11: Fixup the encoder stealing logic: We can't look at encoder->crtc
since that's not in the atomic state structures and might be updated
asynchronously in and async commit. Instead we need to inspect all the
connector states and check whether the encoder is currently in used
and if so, on which crtc.
v12: Review from Sean:
- A few spelling fixes.
- Flatten control flow indent by converting if blocks to early
continue/return in 2 places.
- Capture connectors_for_crtc return value in int num_connectors
instead of bool has_connectors and do an explicit int->bool
conversion with !!. I think the helper is more useful for drivers if
it returns the number of connectors (e.g. to detect cloning
configurations), so decided to keep that return value.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.
This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.
v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.
v3: Shift source coordinates correctly for 16.16 fixed point.
v4: Don't forget to call ->atomic_destroy_state if available.
v5: Fixup kerneldoc.
v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.
v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
v8: Fixup an embarrassing h/vdisplay mixup.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Converting a driver to the atomic interface can be a daunting
undertaking. One of the prerequisites is to have full universal planes
support.
To make that transition a bit easier this patch provides plane helpers
which use the new atomic helper callbacks just only for the plane
changes. This way the plane update functionality can be tested without
being forced to convert everything at once.
Of course a real atomic update capable driver will implement the
all plane properties through the atomic interface, so these helpers
are mostly transitional. But they can be used to enable proper
universal plane support, especially once the crtc helpers have also
been adapted.
v2: Use ->atomic_duplicate_state if available.
v3: Don't forget to call ->atomic_destroy_state if available.
v4: Fixup kerneldoc, reported by Paulo.
v5: Extract a common plane_commit helper and fix some bugs in the
plane_state setup of the plane_disable implementation.
v6: Fix issues with the cleanup of the old fb. Since transitional
helpers can be mixed we need to assume that the old fb has been set up
by a legacy path (e.g. set_config or page_flip when the primary plane
is converted to use these functions already). Hence pass an additional
old_fb parameter to plane_commit to do that cleanup work correctly.
v7:
- Fix spurious WARNING (crtc helpers really love to disable stuff
harder) and fix array index bonghits.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
- Don't indicate failure if drm_vblank_get doesn't work - that's
expected when the pipe is in dpms off mode.
v8: Review from Sean:
- s/fail/out/ to make the meaning of a label more clear.
- spelling fix in the commit message.
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the first cut of atomic helper code. As-is it's only useful to
implement a pure atomic interface for plane updates.
Later patches will integrate this with the crtc helpers so that full
atomic updates are possible. We also need a pile of helpers to aid
drivers in transitioning from the legacy world to the shiny new atomic
age. Finally we need helpers to implement legacy ioctls on top of the
atomic interface.
The design of the overall helpers<->driver interaction is fairly
simple, but has an unfortunate large interface:
- We have ->atomic_check callbacks for crtcs and planes. The idea is
that connectors don't need any checking, and if they do they can
adjust the relevant crtc driver-private state. So no connector hooks
should be needed. Also the crtc helpers integration will do the
->best_encoder checks, so no need for that.
- Framebuffer pinning needs to be done before we can commit to the hw
state. This is especially important for async updates where we must
pin all buffers before returning to userspace, so that really only
hw failures can happen in the asynchronous worker.
Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources
management.
- The actual atomic plane commit can't fail (except hw woes), so has
void return type. It has three stages:
1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can
use this to unset the GO bit or similar latches to prevent plane
updates.
2. Update plane state by looping over all changed planes and calling
plane->atomic_update. Presuming the hardware is sane and has GO
bits drivers can simply bash the state into the hardware in this
function. Other drivers might use this to precompute hw state for
the final step.
3. Finally latch the update for the next vblank with
crtc->atomic_flush. Note that this function doesn't need to wait
for the vblank to happen even for the synchronous case.
v2: Clear drm_<obj>_state->state to NULL when swapping in state.
v3: Add TODO that we don't short-circuit plane updates for now. Likely
no one will care.
v4: Squash in a bit of polish that somehow landed in the wrong (later)
patche.
v5: Integrate atomic functions into the drm docbook and fixup the
kerneldoc.
v6: Fixup fixup patch squashing fumble.
v7: Don't touch the legacy plane state plane->fb and plane->crtc. This
is only used by the legacy ioctl code in the drm core, and that code
already takes care of updating the pointers in all relevant cases.
This is in stark contrast to connector->encoder->crtc links on the
modeset side, which we still need to set since the core doesn't touch
them.
Also some more kerneldoc polish.
v8: Drop outdated comment.
v9: Handle the state->state pointer correctly: Only clearing the
->state pointer when assigning the state to the kms object isn't good
enough. We also need to re-link the swapped out state into the
drm_atomic_state structure.
v10: Shuffle the misplaced docbook template hunk around that Sean spotted.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some differences compared to Rob's patches again:
- Dropped the committed and checked booleans. Checking will be
internally enforced by always calling ->atomic_check before
->atomic_commit. And async handling needs to be solved differently
because the current scheme completely side-steps ww mutex deadlock
avoidance (and so either reinvents a new deadlock avoidance wheel or
like the current code just deadlocks).
- State for connectors needed to be added, since now they have a
full-blown drm_connector_state (so that drivers have something to
attach their own stuff to).
- Refcounting is gone. I plane to solve async updates differently,
since the lock-passing scheme doesn't cut it (since it abuses ww
mutexes). Essentially what we need for async is a simple ownership
transfer from the caller to the driver. That doesn't need full-blown
refcounting.
- The acquire ctx is a pointer. Real atomic callers should have that
on their stack, legacy entry points need to put the right one
(obtained by drm_modeset_legacy_acuire_ctx) in there.
- I've dropped all hooks except check/commit. All the begin/end
handling is done by core functions and is the same.
- commit/check are just thin wrappers that ensure that ->check is
always called.
- To help out with locking in the legacy implementations I've added a
helper to just grab all locks in the backoff case.
v2: Add notices that check/commit can fail with EDEADLK.
v3:
- More consistent naming for state_alloc.
- Add state_clear which is needed for backoff and retry.
v4: Planes/connectors can switch between crtcs, and we need to be
careful that we grab the state (and locks) for both the old and new
crtc. Improve the interface functions to ensure this.
v5: Add functions to grab affected connectors for a crtc and to recompute
the crtc->enable state. This is useful for both helper and atomic ioctl
code when e.g. removing a connector.
v6: Squash in fixup from Fengguang to use ERR_CAST.
v7: Add debug output.
v8: Make checkpatch happy about kcalloc argument ordering.
v9: Improve kerneldoc in drm_crtc.h
v10:
- Fix another kcalloc argument misorder I've missed.
- More polish for kerneldoc.
v11: Clarify the ownership rules for the state object. The new rule is
that a successful drm_atomic_commit (whether synchronous or asnyc)
always inherits the state and is responsible for the clean-up. That
way async and sync ->commit functions are more similar.
v12: A few bugfixes:
- Assign state->state pointers correctly when grabbing state objects -
we need to link them up with the global state.
- Handle a NULL crtc in set_crtc_for_plane to simplify code flow a bit
for the callers of this function.
v13: Review from Sean:
- kerneldoc spelling fixes
- Don't overallocate states->planes.
- Handle NULL crtc in set_crtc_for_connector.
v14: Sprinkle __must_check over all functions which do wait/wound
locking to make sure callers don't forget this. Since I have ;-)
v15: Be more explicit in the kerneldoc when functions can return
-EDEADLK what to do. And that every other -errno is fatal.
v16: Indent with tabs instead of space, spotted by Ander.
v17: Review from Thierry, small kerneldoc and other naming polish.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Heavily based upon Rob Clark's atomic series.
- Dropped the connector state from the crtc state, instead opting for a
full-blown connector state. The only thing it has is the desired
crtc, but drivers which have connector properties have now a
data-structure to subclass.
- Rename create_state to duplicate_state. Especially for legacy ioctls
we want updates on top of existing state, so we need a way to get at
the current state. We need to be careful to clear the backpointers
to the global state correctly though.
- Drop property values. Drivers with properties simply need to
subclass the datastructures and track the decoded values in there. I
also think that common properties (like rotation) should be decoded
and stored in the core structures.
- Create a new set of ->atomic_set_prop functions, for smoother
transitions from legacy to atomic operations.
- Pass the ->atomic_set_prop ioctl the right structure to avoid
chasing pointers in drivers.
- Drop temporary boolean state for now until we resurrect them with
the helper functions.
- Drop invert_dimensions. For now we don't need any checking since
that's done by the higher-level legacy ioctls. But even then we
should also add rotation/flip tracking to the core drm_crtc_state,
not just whether the dimensions are inverted.
- Track crtc state with an enable/disable. That's equivalent to
mode_valid, but a bit clearer that it means the entire crtc.
The global interface will follow in subsequent patches.
v2: We need to allow drivers to somehow set up the initial state and
clear it on resume. So add a plane->reset callback for that. Helpers
will be provided with default behaviour for all these.
v3: Split out the plane->reset into a separate patch.
v4: Improve kerneldoc in drm_crtc.h
v5: Remove unused inline functions for handling state objects, those
callbacks are now mandatory for full atomic support.
v6: Fix commit message nit Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've forgotten to do this in:
commit cb597bb3a2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jul 27 19:09:33 2014 +0200
drm: trylock modest locking for fbdev panics
Oops, fix this asap.
In my defense kerneldoc is really awful and there's no way it can pick
up structured comments per struct member. Which means we need both
since people won't scroll up even a few lines.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In the interest of reducing magic numbers and having to cross check with
the specs all the time.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These counters are used for Displayort compliance testing to detect error
conditions when executing tests 4.2.2.4 and 4.2.2.5 in the Displayport Link
CTS specificaiton. They determine whether to use the preferred/requested
mode or the failsafe mode during these tests.
V2:
- Addressed previous review feedback
- Updated commit message
- Changed from uint8_t to uint32_t
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Todd Previte <tprevite@gmail.com>
[danvet: s/uint32_t/unsigned/ for clearer intent. Also drop the i915
from the subject, it's all core stuff.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've tried to cc all the people who have recently added new stuff
but forgotten to update documentation.
I've also decided not to bother documenting the massive property list
in struct drm_mode_config. If that beast keeps on growing we might want
to extract it into a separate structure which we won't document.
Cc: Thomas Wood <thomas.wood@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
While writing atomic docs I've noticed that I don't get any errors
for my screw-ups in drm_crtc.h. Fix this immediately.
This just does the bare minimum to get starts, lots of stuff isn't
properly documented yet unfortunately.
v2: Fix adjacent spelling error Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.
Maybe this helps to encourage driver maintainers to do the switch.
v2: Fix #include ordering for tegra, reported by 0-day builder.
v3: Include required headers, reported by Thierry.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Ville Syrjälä