Commit Graph

10199 Commits

Author SHA1 Message Date
Michal Kalderon 3576e99e08 qed*: Add iWARP 100g support
Add iWARP engine affinity setting for supporting iWARP over 100g.
iWARP cannot be distinguished by the LLH from L2, hence the
engine division will affect L2 as well. For this reason we add
a parameter to devlink to determine the engine division.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26 13:04:12 -07:00
Michal Kalderon 443473d2f3 qedr: Change the MSI-X vectors selection to be based on affined engine
Use the msix vectors of the affined hwfn and not the
leading one.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26 13:04:11 -07:00
Michal Kalderon 08eb1fb0f7 qed*: Change hwfn used for sb initialization
When initializing status blocks use the affined hwfn
instead of the leading one for RDMA / Storage

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26 13:04:11 -07:00
Leon Romanovsky 62a38e704d RDMA/efa: Remove check that prevents destroy of resources in error flows
Drivers cannot check the udata for validity when doing destroy as there
will be no way to report this error back to the uverbs.

Since udata is new for destroy no driver should start to use it - instead
drivers should opt for the ioctl interface and define it in a way where it
cannot fail due to incorrect data.

Remove the checks on udata construction so EFA is consistent with
everything else.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 21:14:28 -03:00
Linus Torvalds 2c1212de6f SPDX update for 5.2-rc2, round 1
Here are series of patches that add SPDX tags to different kernel files,
 based on two different things:
   - SPDX entries are added to a bunch of files that we missed a year ago
     that do not have any license information at all.
 
     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the last
     big sweep, or they were Makefile/Kconfig files, which we didn't
     touch last time.
 
   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself.  Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.
 
 These patches have been out for review on the linux-spdx@vger mailing
 list, and while they were created by automatic tools, they were
 hand-verified by a bunch of different people, all whom names are on the
 patches are reviewers.
 
 The reason for these "large" patches is if we were to continue to
 progress at the current rate of change in the kernel, adding license
 tags to individual files in different subsystems, we would be finished
 in about 10 years at the earliest.
 
 There will be more series of these types of patches coming over the next
 few weeks as the tools and reviewers crunch through the more "odd"
 variants of how to say "GPLv2" that developers have come up with over
 the years, combined with other fun oddities (GPL + a BSD disclaimer?)
 that are being unearthed, with the goal for the whole kernel to be
 cleaned up.
 
 These diffstats are not small, 3840 files are touched, over 10k lines
 removed in just 24 patches.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
 1KwtfRnMtG6dk/XaS7H7
 =O9lH
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull SPDX update from Greg KH:
 "Here is a series of patches that add SPDX tags to different kernel
  files, based on two different things:

   - SPDX entries are added to a bunch of files that we missed a year
     ago that do not have any license information at all.

     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the
     last big sweep, or they were Makefile/Kconfig files, which we
     didn't touch last time.

   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself. Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers.

  The reason for these "large" patches is if we were to continue to
  progress at the current rate of change in the kernel, adding license
  tags to individual files in different subsystems, we would be finished
  in about 10 years at the earliest.

  There will be more series of these types of patches coming over the
  next few weeks as the tools and reviewers crunch through the more
  "odd" variants of how to say "GPLv2" that developers have come up with
  over the years, combined with other fun oddities (GPL + a BSD
  disclaimer?) that are being unearthed, with the goal for the whole
  kernel to be cleaned up.

  These diffstats are not small, 3840 files are touched, over 10k lines
  removed in just 24 patches"

* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
  ...
2019-05-21 12:33:38 -07:00
Leon Romanovsky dab99af99c RDMA/nes: Remove second wait queue initialization call
The same wait queue is initialized a couple of lines above.

Fixes: 3c2d774cad ("RDMA/nes: Add a driver for NetEffect RNICs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:50:53 -03:00
Leon Romanovsky 3bb58cfe07 RDMA/i40iw: Remove useless NULL checks
There is no need to check existence of structures to be destroyed.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:50:53 -03:00
Leon Romanovsky 269c97fd48 RDMA/nes: Remove useless NULL checks
The destroy functions are always called with relevant structs, there is no
need to check their existence.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:50:53 -03:00
Leon Romanovsky dfdb089904 RDMA/ipoib: Remove check of destroy CQ
There are nothing to do from user side with knowledge that destroy CQ
fails.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:50:53 -03:00
Kamal Heib deee3c7e49 RDMA/core: Return void from ib_device_check_mandatory()
The return value from ib_device_check_mandatory() is always 0 - change it
to be void.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:30:46 -03:00
Yuval Shaia 8ce0048f76 IB/mlx4: Delete unused func arg
The function argument virt_addr is not in use - delete it.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:27:25 -03:00
Leon Romanovsky 619122be3d RDMA/hns: Fix PD memory leak for internal allocation
free_pd is allocated internally by the driver hence needs to be freed
internally too or it leaks.

Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:25:37 -03:00
Jason Gunthorpe d2183c6f19 RDMA/umem: Move page_shift from ib_umem to ib_odp_umem
This value has always been set to PAGE_SHIFT in the core code, the only
thing that does differently was the ODP path. Move the value into the ODP
struct and still use it for ODP, but change all the non-ODP things to just
use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly.

Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-05-21 15:23:24 -03:00
Leon Romanovsky dc1435c00f RDMA/srp: Rename SRP sysfs name after IB device rename trigger
SRP logic used device name and port index as symlink to relevant
kobject. If the IB device is renamed then the prior name will be re-used
by the next device plugged in and sysfs will panic as SRP will try to
re-use the same name.

 mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0
 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1'
 CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 Call Trace:
  dump_stack+0x5a/0x73
  sysfs_warn_dup+0x58/0x70
  sysfs_do_create_link_sd.isra.2+0xa3/0xb0
  device_add+0x33f/0x660
  srp_add_one+0x301/0x4f0 [ib_srp]
  add_client_context+0x99/0xe0 [ib_core]
  enable_device_and_get+0xd1/0x1b0 [ib_core]
  ib_register_device+0x533/0x710 [ib_core]
  ? mutex_lock+0xe/0x30
  __mlx5_ib_add+0x23/0x70 [mlx5_ib]
  mlx5_add_device+0x4e/0xd0 [mlx5_core]
  mlx5_register_interface+0x85/0xc0 [mlx5_core]
  ? 0xffffffffa0791000
  do_one_initcall+0x4b/0x1cb
  ? kmem_cache_alloc_trace+0xc6/0x1d0
  ? do_init_module+0x22/0x21f
  do_init_module+0x5a/0x21f
  load_module+0x17f2/0x1ca0
  ? m_show+0x1c0/0x1c0
  __do_sys_finit_module+0x94/0xe0
  do_syscall_64+0x48/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f157cce10d9

The module load/unload sequence was used to trigger such kernel panic:
 sudo modprobe ib_srp
 sudo modprobe -r mlx5_ib
 sudo modprobe -r mlx5_core
 sudo modprobe mlx5_core

Have SRP track the name of the core device so that it can't have a name
collision.

Fixes: d21943dd19 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:06:45 -03:00
Sagiv Ozeri 69054666df RDMA/qedr: Fix incorrect device rate.
Use the correct enum value introduced in commit 12113a35ad ("IB/core:
Add HDR speed enum") Prior to this change a 50Gbps port would show 40Gbps.

This patch also cleaned up the redundant redefiniton of ib speeds for
qedr.

Fixes: 12113a35ad ("IB/core: Add HDR speed enum")
Signed-off-by: Sagiv Ozeri <sagiv.ozeri@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:04:53 -03:00
Israel Rukshin 91f571293e RDMA/core: Fix doc typo
Use the correct function names.

Fixes: c4367a2635 ("IB: Pass uverbs_attr_bundle down ib_x destroy path")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:06 -03:00
Max Gurtovoy 53bfbf9be8 RDMA/rw: Add info regarding SG count failure
Print the supported and wanted values for SG count during signature
operation.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:06 -03:00
Israel Rukshin f73e407642 RDMA/rw: Print the correct number of sig MRs
A wrong value was printed in case of sig MR pool initialization failure.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:06 -03:00
Israel Rukshin 2d465a165a RDMA/rw: Fix doc typo
Use the correct function name.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:06 -03:00
Israel Rukshin dae6345aa7 IB/isert: Remove unused sig_attrs argument
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:06 -03:00
Israel Rukshin 0cc2896f02 IB/iser: Remove unused sig_attrs argument
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:05 -03:00
Israel Rukshin a7b287bf78 IB/iser: Refactor iscsi_iser_check_protection function
Reduce lines of code by using local variable.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21 15:01:05 -03:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds 78e0365184 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
    Cheng.

 3) Orphan NFC, we'll take the patches directly into my tree. From
    Johannes Berg.

 4) We can't recycle cloned TCP skbs, from Eric Dumazet.

 5) Some flow dissector bpf test fixes, from Stanislav Fomichev.

 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.

 7) Fix some potential fib6 leaks, from Eric Dumazet.

 8) Fix a _decode_session4 uninitialized memory read bug fix that got
    lost in a merge. From Florian Westphal.

 9) Fix ipv6 source address routing wrt. exception route entries, from
    Wei Wang.

10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
    driver, fix from Tariq Toukan.

11) Clean up botched merge on netfilter kselftest, from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
  of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
  net: fix kernel-doc warnings for socket.c
  net: Treat sock->sk_drops as an unsigned int when printing
  kselftests: netfilter: fix leftover net/net-next merge conflict
  mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
  mlxsw: core: Prevent QSFP module initialization for old hardware
  vsock/virtio: Initialize core virtio vsock before registering the driver
  net/mlx5e: Fix possible modify header actions memory leak
  net/mlx5e: Fix no rewrite fields with the same match
  net/mlx5e: Additional check for flow destination comparison
  net/mlx5e: Add missing ethtool driver info for representors
  net/mlx5e: Fix number of vports for ingress ACL configuration
  net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
  net/mlx5e: Fix wrong xmit_more application
  net/mlx5: Fix peer pf disable hca command
  net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
  net/mlx5: Add meaningful return codes to status_to_err function
  net/mlx5: Imply MLXFW in mlx5_core
  Revert "tipc: fix modprobe tipc failed after switch order of device registration"
  vsock/virtio: free packets during the socket release
  ...
2019-05-20 08:21:07 -07:00
Parav Pandit 02f3afd975 net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
To avoid any ambiguity between vport index and vport number,
rename functions that had vport, to vport_num or vport_index appropriately.

vport_num is u16 hence change mlx5_eswitch_index_to_vport_num() return
type to u16.

vport_index is an int in vport array. Hence change input type of vport
index in mlx5_eswitch_index_to_vport_num() to int.

Correct multiple eswitch representor interfaces use type u16 of
rep->vport as type int vport_index.

Send vport FW commands with correct eswitch u16 vport_num instead
host int vport_index.

Fixes: 5ae5162066 ("net/mlx5: E-Switch, Assign a different position for uplink rep and vport")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-05-17 13:16:47 -07:00
Linus Torvalds 5ac9433224 5.2 Merge Window second pull request
This is being sent to get a fix for the gcc 9.1 build warnings, and I've
 also pulled in some bug fix patches that were posted in the last two
 weeks.
 
 - Avoid the gcc 9.1 warning about overflowing a union member
 
 - Fix the wrong callback type for a single response netlink to doit
 
 - Bug fixes from more usage of the mlx5 devx interface
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlzbYAsACgkQOG33FX4g
 mxpzYw/9HxKMpU5QmHIpV17sVV5SSepfWVQ6YmrNMG5BTBI8by0zj58fJ9TLuNu+
 OYMD6dS/baLeiN6jszec6zWufjUVfMU5aw1ja+iwF78fS8NmVXlrLz/xWmkLu4fi
 pBN3PCt90ziCnVXOlsn55dKAcgmiaRws+TzGjGGvQP9IYpfO6kyj8HIrP6im910E
 j41HcGrD1fMLy0js9Aq6OzMswbop8uFTV/UBp5onKASNPwAGlnigvjTKqnSlt+Vo
 rswc/h8uIz1jnuH1s8EfggFY7nGqxNmq9G/UNBo/86JcLI97SaYN9pqQJ+HcEtDR
 tJYoDr8PFDJcDaFpm0gbNK5pO9cS7X/I/NWZrdePywZAPAMFKXWgnUejLXVcPKd9
 EdkWyg7sJxPHoo6CXrNECu7t/57q3E3qOG93HnXt64pJqv9C9lUmpGrvdv7PBVRK
 6nVBysrkV0/27sBeZzul0teRbEqRii/RJ/iphE3w3hPx696Bi5uFzN/8M3tfavj1
 pBX7eLAevA+yPlN7+sZiefPjeP0jsvwlzNdrP+9CmB5iIlj0yNlmTvT2rbv+hte0
 0JTQvDilmC0e/W0KqQ6fGGfmPFBbHm/UDLu0h24qdw1qQXGOaDH6RRMslrtgNYNw
 Mkc++uIC6/KdiehEzolht87FH4sMJrd0DS540WVqJqje7K3jyY8=
 =Lo/s
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull more rdma updates from Jason Gunthorpe:
 "This is being sent to get a fix for the gcc 9.1 build warnings, and
  I've also pulled in some bug fix patches that were posted in the last
  two weeks.

   - Avoid the gcc 9.1 warning about overflowing a union member

   - Fix the wrong callback type for a single response netlink to doit

   - Bug fixes from more usage of the mlx5 devx interface"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  net/mlx5: Set completion EQs as shared resources
  IB/mlx5: Verify DEVX general object type correctly
  RDMA/core: Change system parameters callback from dumpit to doit
  RDMA: Directly cast the sockaddr union to sockaddr
2019-05-14 20:56:31 -07:00
Jérôme Glisse dfcd66604c mm/mmu_notifier: convert user range->blockable to helper function
Use the mmu_notifier_range_blockable() helper function instead of directly
dereferencing the range->blockable field.  This is done to make it easier
to change the mmu_notifier range field.

This patch is the outcome of the following coccinelle patch:

%<-------------------------------------------------------------------
@@
identifier I1, FN;
@@
FN(..., struct mmu_notifier_range *I1, ...) {
<...
-I1->blockable
+mmu_notifier_range_blockable(I1)
...>
}
------------------------------------------------------------------->%

spatch --in-place --sp-file blockable.spatch --dir .

Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:49 -07:00
Ira Weiny f3b4fdb18c IB/mthca: use the new FOLL_LONGTERM flag to get_user_pages_fast()
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS
DAX pages being mapped.

Link: http://lkml.kernel.org/r/20190328084422.29911-8-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-8-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Ira Weiny 664b21e717 IB/qib: use the new FOLL_LONGTERM flag to get_user_pages_fast()
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS
DAX pages being mapped.

Link: http://lkml.kernel.org/r/20190328084422.29911-7-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-7-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Ira Weiny 9fdf4aa156 IB/hfi1: use the new FOLL_LONGTERM flag to get_user_pages_fast()
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS
DAX pages being mapped.

[ira.weiny@intel.com: v3]
  Link: http://lkml.kernel.org/r/20190328084422.29911-6-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190328084422.29911-6-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-6-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Ira Weiny 73b0140bf0 mm/gup: change GUP fast to use flags rather than a write 'bool'
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.

This patch does not change any functionality.  New functionality will
follow in subsequent patches.

Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.

NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted.  This breaks the current
GUP call site convention of having the returned pages be the final
parameter.  So the suggestion was rejected.

Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Ira Weiny 932f4a630a mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM
Pach series "Add FOLL_LONGTERM to GUP fast and use it".

HFI1, qib, and mthca, use get_user_pages_fast() due to its performance
advantages.  These pages can be held for a significant time.  But
get_user_pages_fast() does not protect against mapping FS DAX pages.

Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which
retains the performance while also adding the FS DAX checks.  XDP has also
shown interest in using this functionality.[1]

In addition we change get_user_pages() to use the new FOLL_LONGTERM flag
and remove the specialized get_user_pages_longterm call.

[1] https://lkml.org/lkml/2019/3/19/939

"longterm" is a relative thing and at this point is probably a misnomer.
This is really flagging a pin which is going to be given to hardware and
can't move.  I've thought of a couple of alternative names but I think we
have to settle on if we are going to use FL_LAYOUT or something else to
solve the "longterm" problem.  Then I think we can change the flag to a
better name.

Secondly, it depends on how often you are registering memory.  I have
spoken with some RDMA users who consider MR in the performance path...
For the overall application performance.  I don't have the numbers as the
tests for HFI1 were done a long time ago.  But there was a significant
advantage.  Some of which is probably due to the fact that you don't have
to hold mmap_sem.

Finally, architecturally I think it would be good for everyone to use
*_fast.  There are patches submitted to the RDMA list which would allow
the use of *_fast (they reworking the use of mmap_sem) and as soon as they
are accepted I'll submit a patch to convert the RDMA core as well.  Also
to this point others are looking to use *_fast.

As an aside, Jasons pointed out in my previous submission that *_fast and
*_unlocked look very much the same.  I agree and I think further cleanup
will be coming.  But I'm focused on getting the final solution for DAX at
the moment.

This patch (of 7):

This patch starts a series which aims to support FOLL_LONGTERM in
get_user_pages_fast().  Some callers who would like to do a longterm (user
controlled pin) of pages with the fast variant of GUP for performance
purposes.

Rather than have a separate get_user_pages_longterm() call, introduce
FOLL_LONGTERM and change the longterm callers to use it.

This patch does not change any functionality.  In the short term
"longterm" or user controlled pins are unsafe for Filesystems and FS DAX
in particular has been blocked.  However, callers of get_user_pages_fast()
were not "protected".

FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it
requires vmas to determine if DAX is in use.

NOTE: In merging with the CMA changes we opt to change the
get_user_pages() call in check_and_migrate_cma_pages() to a call of
__get_user_pages_locked() on the newly migrated pages.  This makes the
code read better in that we are calling __get_user_pages_locked() on the
pages before and after a potential migration.

As a side affect some of the interfaces are cleaned up but this is not the
primary purpose of the series.

In review[1] it was asked:

<quote>
> This I don't get - if you do lock down long term mappings performance
> of the actual get_user_pages call shouldn't matter to start with.
>
> What do I miss?

A couple of points.

First "longterm" is a relative thing and at this point is probably a
misnomer.  This is really flagging a pin which is going to be given to
hardware and can't move.  I've thought of a couple of alternative names
but I think we have to settle on if we are going to use FL_LAYOUT or
something else to solve the "longterm" problem.  Then I think we can
change the flag to a better name.

Second, It depends on how often you are registering memory.  I have spoken
with some RDMA users who consider MR in the performance path...  For the
overall application performance.  I don't have the numbers as the tests
for HFI1 were done a long time ago.  But there was a significant
advantage.  Some of which is probably due to the fact that you don't have
to hold mmap_sem.

Finally, architecturally I think it would be good for everyone to use
*_fast.  There are patches submitted to the RDMA list which would allow
the use of *_fast (they reworking the use of mmap_sem) and as soon as they
are accepted I'll submit a patch to convert the RDMA core as well.  Also
to this point others are looking to use *_fast.

As an asside, Jasons pointed out in my previous submission that *_fast and
*_unlocked look very much the same.  I agree and I think further cleanup
will be coming.  But I'm focused on getting the final solution for DAX at
the moment.

</quote>

[1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965

[ira.weiny@intel.com: v3]
  Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:45 -07:00
Yishai Hadas cd5d20f13f IB/mlx5: Verify DEVX general object type correctly
As the obj_id in the firmware is not globally unique in general_object,
the object type must be considered upon checking for a valid object id.

Fixes: 2351776e87 ("IB/mlx5: Verify DEVX object type")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-14 10:22:09 -03:00
Parav Pandit 4d7ba8ce0f RDMA/core: Change system parameters callback from dumpit to doit
.dumpit() callback is used for returning same type of data in the loop,
e.g. loop over ports, resources, devices.

However system parameters are general and standalone for whole
subsystem. It means that getting system parameters should be doit
callback.

Fixes: cb7e0e1305 ("RDMA/core: Add interface to read device namespace sharing mode")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-13 22:16:48 -03:00
Jason Gunthorpe 641114d2af RDMA: Directly cast the sockaddr union to sockaddr
gcc 9 now does allocation size tracking and thinks that passing the member
of a union and then accessing beyond that member's bounds is an overflow.

Instead of using the union member, use the entire union with a cast to
get to the sockaddr. gcc will now know that the memory extends the full
size of the union.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-13 22:16:38 -03:00
Linus Torvalds dce45af5c2 5.2 Merge Window pull request
This has been a smaller cycle than normal. One new driver was accepted,
 which is unusual, and at least one more driver remains in review on the
 list.
 
 - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma
 
 - Many patches from MatthewW converting radix tree and IDR users to use
   xarray
 
 - Introduction of tracepoints to the MAD layer
 
 - Build large SGLs at the start for DMA mapping and get the driver to
   split them
 
 - Generally clean SGL handling code throughout the subsystem
 
 - Support for restricting RDMA devices to net namespaces for containers
 
 - Progress to remove object allocation boilerplate code from drivers
 
 - Change in how the mlx5 driver shows representor ports linked to VFs
 
 - mlx5 uapi feature to access the on chip SW ICM memory
 
 - Add a new driver for 'EFA'. This is HW that supports user space packet
   processing through QPs in Amazon's cloud
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlzTIU0ACgkQOG33FX4g
 mxrGKQ/8CqpyvuCyZDW5ovO4DI4YlzYSPXehWlwxA4CWhU1AYTujutnNOdZdngnz
 atTthOlJpZWJV26orvvzwIOi4qX/5UjLXEY3HYdn07JP1Z4iT7E3P4W2sdU3vdl3
 j8bU7xM7ZWmnGxrBZ6yQlVRadEhB8+HJIZWMw+wx66cIPnvU+g9NgwouH67HEEQ3
 PU8OCtGBwNNR508WPiZhjqMDfi/3BED4BfCihFhMbZEgFgObjRgtCV0M33SSXKcR
 IO2FGNVuDAUBlND3vU9guW1+M77xE6p1GvzkIgdCp6qTc724NuO5F2ngrpHKRyZT
 CxvBhAJI6tAZmjBVnmgVJex7rA8p+y/8M/2WD6GE3XSO89XVOkzNBiO2iTMeoxXr
 +CX6VvP2BWwCArxsfKMgW3j0h/WVE9w8Ciej1628m1NvvKEV4AGIJC1g93lIJkRN
 i3RkJ5PkIrdBrTEdKwDu1FdXQHaO7kGgKvwzJ7wBFhso8BRMrMfdULiMbaXs2Bw1
 WdL5zoSe/bLUpPZxcT9IjXRxY5qR0FpIOoo6925OmvyYe/oZo1zbitS5GGbvV90g
 tkq6Jb+aq8ZKtozwCo+oMcg9QPLYNibQsnkL3QirtURXWCG467xdgkaJLdF6s5Oh
 cp+YBqbR/8HNMG/KQlCfnNQKp1ci8mG3EdthQPhvdcZ4jtbqnSI=
 =TS64
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle than normal. One new driver was
  accepted, which is unusual, and at least one more driver remains in
  review on the list.

  Summary:

   - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
     vmw_pvrdma

   - Many patches from MatthewW converting radix tree and IDR users to
     use xarray

   - Introduction of tracepoints to the MAD layer

   - Build large SGLs at the start for DMA mapping and get the driver to
     split them

   - Generally clean SGL handling code throughout the subsystem

   - Support for restricting RDMA devices to net namespaces for
     containers

   - Progress to remove object allocation boilerplate code from drivers

   - Change in how the mlx5 driver shows representor ports linked to VFs

   - mlx5 uapi feature to access the on chip SW ICM memory

   - Add a new driver for 'EFA'. This is HW that supports user space
     packet processing through QPs in Amazon's cloud"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
  RDMA/ipoib: Allow user space differentiate between valid dev_port
  IB/core, ipoib: Do not overreact to SM LID change event
  RDMA/device: Don't fire uevent before device is fully initialized
  lib/scatterlist: Remove leftover from sg_page_iter comment
  RDMA/efa: Add driver to Kconfig/Makefile
  RDMA/efa: Add the efa module
  RDMA/efa: Add EFA verbs implementation
  RDMA/efa: Add common command handlers
  RDMA/efa: Implement functions that submit and complete admin commands
  RDMA/efa: Add the ABI definitions
  RDMA/efa: Add the com service API definitions
  RDMA/efa: Add the efa_com.h file
  RDMA/efa: Add the efa.h header file
  RDMA/efa: Add EFA device definitions
  RDMA: Add EFA related definitions
  RDMA/umem: Remove hugetlb flag
  RDMA/bnxt_re: Use core helpers to get aligned DMA address
  RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
  RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
  RDMA/umem: Add API to find best driver supported page size in an MR
  ...
2019-05-09 09:02:46 -07:00
Linus Torvalds 80f232121b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...
2019-05-07 22:03:58 -07:00
Linus Torvalds eac7078a0f pidfd patches for v5.2-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE7btrcuORLb1XUhEwjrBW1T7ssS0FAlzReuoACgkQjrBW1T7s
 sS1uvBAA16pgnhRNxNTrp3LYft6lUWmF4n0baOTVtQNLhPjpwaOxHIrCBugkQCJB
 QcQ9IQSOvIkaEW0XAQoPBaeLviiKhHOFw1Fv89OtW6xUidSfSV15lcI9f1F2pCm2
 4yCL/8XvL6M0NhxiwftJAkWOXeDNLfjFnLwyLxBfgg3EeyqMgUB8raeosEID0ORR
 gm2/g8DYS2r+KNqM/F4xvMSgabfi2bGk+8BtAaVnftJfstpRNrqKwWnSK3Wspj1l
 5gkb8gSsiY6ns3V6RgNHrFlhevFg8V+VjcJt7FR+aUEjOkcoiXas/PhvamMzdsn/
 FM1F/A0pM8FSybIUClhnnnxNPc+p8ZN/71YQAPs+Mnh3xvbtKea2lkhC+Xv4OpK3
 edutSZWFaiIery82Rk00H3vqiSF1+kRIXSpZSS4mElk4FsVljkyH+nSP7rbmE2MR
 EQe+kKnZl8QzWrVbnODC+EVvvVpA2bXDvENJmvKqus+t2G0OdV7Iku3F5E3KjF8k
 S5RRV1zuBF3ugqnjmYrVmJtpEA8mxClmqvg6okru+qW6ngO5oOgVpPLjWn1CXcdj
 wcuQ6Pe1QwAHS54e9WSWgCHVssLvm9nCdCqypdNaoyGWmbTWntwlrY7Y0JUQnAbB
 6/G/DQQiCWY9y8bMZlTEydhIpgcsdROuPYv+oHF5+eQQthsWwHc=
 =LH11
 -----END PGP SIGNATURE-----

Merge tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd updates from Christian Brauner:
 "This patchset makes it possible to retrieve pidfds at process creation
  time by introducing the new flag CLONE_PIDFD to the clone() system
  call. Linus originally suggested to implement this as a new flag to
  clone() instead of making it a separate system call.

  After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
  parent_tidptr argument. This means we can give back the associated pid
  and the pidfd at the same time. Access to process metadata information
  thus becomes rather trivial.

  As has been agreed, CLONE_PIDFD creates file descriptors based on
  anonymous inodes similar to the new mount api. They are made
  unconditional by this patchset as they are now needed by core kernel
  code (vfs, pidfd) even more than they already were before (timerfd,
  signalfd, io_uring, epoll etc.). The core patchset is rather small.
  The bulky looking changelist is caused by David's very simple changes
  to Kconfig to make anon inodes unconditional.

  A pidfd comes with additional information in fdinfo if the kernel
  supports procfs. The fdinfo file contains the pid of the process in
  the callers pid namespace in the same format as the procfs status
  file, i.e. "Pid:\t%d".

  To remove worries about missing metadata access this patchset comes
  with a sample/test program that illustrates how a combination of
  CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
  access to process metadata through /proc/<pid>.

  Further work based on this patchset has been done by Joel. His work
  makes pidfds pollable. It finished too late for this merge window. I
  would prefer to have it sitting in linux-next for a while and send it
  for inclusion during the 5.3 merge window"

* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  samples: show race-free pidfd metadata access
  signal: support CLONE_PIDFD with pidfd_send_signal
  clone: add CLONE_PIDFD
  Make anon_inodes unconditional
2019-05-07 12:30:24 -07:00
Linus Torvalds 41bc10cabe stream_open related patches for Linux 5.2
https://lore.kernel.org/linux-fsdevel/CAHk-=wg1tFzcaX2v9Z91vPJiBR486ddW5MtgDL02-fOen2F0Aw@mail.gmail.com/T/#m5b2d9ad3aeacea4bd6aa1964468ac074bf3aa5bf
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEECVWwJCUO7/z+QjZbZsp4hBP2dUkFAlzR1UgQHGtpcnJAbmV4
 ZWRpLmNvbQAKCRBmyniEE/Z1SZBiEACGw1LzUmjV9eBYFjqaUkgX/Zfcu42D4Ek2
 8MuWnNdRabtpGQq0LccYlfoL3yH5xECp14IkCgJvkjqoZ3CcqWcv6uDxf0WtnUqZ
 wPx1RYZykb4RZj2A6/ndhInReP4AlXICyTVulKb+BquVkemMvmXX8k+bkr/msKfT
 9jdKWFIn+ANNABt3y2D7ywZvs9mkxIx+Fti+tVV4BFBeGfUuj4ArZBOHnngRnIk/
 XYlQ7FVzENSPSB+3GvL34jTGEzo8suPHKhHQlIhtcd5hwzVRZKE2sdVXsCc6/WbY
 YnT32gmT1/+cUuDl1mZSiQY5R4Xkb07k6/jNrdmjQpwmWbZu90cuRhb+JBXwnmjZ
 2Wgy3sfwYISDxtePukg1iYePlHlVlGTYqMo3AQrTBs/gEwCKWrsKQb98mRxlf1YK
 e2mdtmq6upYoorLFQesfRgrCg4GTBiPkrR3amXsFgJ2O5fhV6R98ZdGSv4kip19f
 ZNoc/t1EtKGwyAJwjINduv36E3RSHODWwSPtSnmSS1ieCGToY1SI3bVUkFM4C0tO
 5GMdSugHgXRGGVbTd/VftndJm6Wtj8b1j8c/1Vh04Q8qbKKJDRTDzAbK1v8oLaDh
 UXAKMIc8uY4caZy3/bTAB2Ou9dibrSi8Oc+LwZqJlwIcbkwn/IGNvmwtWv4ehorE
 N7EhCFZsFQ==
 =Mavg
 -----END PGP SIGNATURE-----

Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux

Pull stream_open conversion from Kirill Smelkov:

 - remove unnecessary double nonseekable_open from drivers/char/dtlk.c
   as noticed by Pavel Machek while reviewing nonseekable_open ->
   stream_open mass conversion.

 - the mass conversion patch promised in commit 10dce8af34 ("fs:
   stream_open - opener for stream-like files so that read and write can
   run simultaneously without deadlock") and is automatically generated
   by running

        $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci

   I've verified each generated change manually - that it is correct to
   convert - and each other nonseekable_open instance left - that it is
   either not correct to convert there, or that it is not converted due
   to current stream_open.cocci limitations. More details on this in the
   patch.

 - finally, change VFS to pass ppos=NULL into .read/.write for files
   that declare themselves streams. It was suggested by Rasmus Villemoes
   and makes sure that if ppos starts to be erroneously used in a stream
   file, such bug won't go unnoticed and will produce an oops instead of
   creating illusion of position change being taken into account.

   Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to
   use stream_open()" that will be hopefully coming via FUSE tree,
   because fs/fuse/ uses new-style .read_iter/.write_iter, and for these
   accessors position is still passed as non-pointer kiocb.ki_pos .

* tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux:
  vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
  *: convert stream-like files from nonseekable_open -> stream_open
  dtlk: remove double call to nonseekable_open
2019-05-07 12:15:13 -07:00
Leon Romanovsky b79656ed44 RDMA/ipoib: Allow user space differentiate between valid dev_port
Systemd triggers the following warning during IPoIB device load:

 mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id.
        Should it look at dev_port instead?
        See Documentation/ABI/testing/sysfs-class-net for more info.

This is caused due to user space attempt to differentiate old systems
without dev_port and new systems with dev_port. In case dev_port will be
zero, the systemd will try to read dev_id instead.

There is no need to print a warning in such case, because it is valid
situation and it is needed to ensure systemd compatibility with old
kernels.

Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358
Cc: <stable@vger.kernel.org> # 4.19
Fixes: f6350da41d ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 16:13:23 -03:00
Dennis Dalessandro ba7d8117f3 IB/core, ipoib: Do not overreact to SM LID change event
When IPoIB receives an SM LID change event, it reacts by flushing its
path record cache and rejoining multicast groups. This is the same
behavior it performs when it receives a reregistration event. This
behavior is unnecessary as an SM may have database backup or
synchronization mechanisms which permit the SM location or LID to change
without loss of multicast membership and without impact to path records.

Both opensm and the OPA FM issue reregistration events if a new SM is
started (or restarted with a new config) or an SM event occurs which
results in loss of multicast membership records by the SM (such as
opensm failover) or the SM encounters new nodes with Active ports (such
as after joining 2 fabrics by connecting switches via ISLs). Hence this
event can be depended on as the trigger for IPoIB cache and multicast
flushing.

It appears that some drivers, such as qib, and hfi1 issue the
IB_EVENT_SM_CHANGE but other drivers such as mlx4 and mlx5 do not.
Empirical testing on Mellanox EDR using ibv_asyncwatch has confirmed
that Mellanox EDR HCAs do not generate SM change events and that opensm
does generate reregistration.

An SM LID change event is generated by the mentioned drivers to reflect
that sm_lid and/or sm_sl in the local port info has changed. The intent
of this event is to permit applications and ULPs which have a local copy
of this information (or an address handle using it) to update their
information.

The intent is that the reregistration event (caused by the SM via a bit
in Set(PortInfo)) be used to inform nodes that they need to rejoin
multicast groups, resubscribe for notices and potentially update path
records.

When an SM migrates or fails over, a SM LID change event can occur. In
response IPoIB discards path records and multicast membership and loses
connectivity until these records are restored via SA requests. In very
large fabrics, it may take minutes for the SM to be ready and for the SA
responses to be supplied.  This can result in undesirable and
unnecessary IPoIB connectivity impacts. It also can result in an
unnecessary storm of SA queries from all nodes in a cluster potentially
followed by yet another storm if the SM issues the reregistration
request.

The fact the Mellanox HCAs do not even generate this event, is further
evidence that on modern IB fabrics there will be no ill side effects
from the proposed changes below to reduce the reaction by 3 kernel
components to this event. So these changes should be benign for Mellanox
IB fabrics and will benefit OPA fabrics while also making ib_core and
ULP behavor "correct" as intended by the IBTA spec and kernel RDMA event
APIs.

Address these issues by removing IB_EVENT_SM_CHANGE handling from ipoib.
IPoIB does not locally store sm_lid nor sm_sl, so it does not need to do
anything on SM LID change. IPoIB makes use of other ib_core components
to issue SA requests for it and those components correctly track SM LID
and SM LID changes.

Also in ib_core multicast handling,  remove the test for
IB_EVENT_SM_CHANGE. This code is moving all multicast groups to the
error state, which will trigger rejoins. This code is used by IPoIB as
well as the connection manager and other clients of multicast groups.
This kernel module centralizes group membership status and joins since a
node can only join a given group once but multiple ULPs or applications
may want to join the same group. It makes use of the sa_query.c
component in ib_core, which correctly trackes SM LID and SL. This
component does not track SM LID nor SL itself and hence need not react
to their changes.

Similarly in the ib_core cache code remove the handling for the
IB_EVENT_SM_CHANGE.  In this function. The ib_cache_update function
which is ultimately called is updating local copies of the pkey table,
gid table and lmc. It does not update nor retain sm_lid nor sm_sl. As
such it does not need to be called on an SM LID change. It technically
also does not need to be called on a reregistration. The LID_CHANGE,
PKEY_CHANGE, GID_CHANGE and port state change events (PORT_ERR,
PORT_ACTICE) should be sufficient triggers.

It is worth noting that the alternative of simply having the hfi1 and
qib drivers not generate the SM LID change event was explored. While
this would duplicate what Mellanox drivers do now, it is not the correct
behavior and removes the ability for an SM to migrate without requiring
reregistration. Since both opensm and OPA SM have mechanisms to backup
or synchronize registration information, it is desirable to let them
perform SM migrations (with LID or SL changes) without requiring
reregistration when they deem it appropriate.

Suggested-by: Todd Rimmer <todd.rimmer@intel.com>
Tested-by: Michael Brooks <michael.brooks@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Todd Rimmer <todd.rimmer@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 16:06:03 -03:00
Leon Romanovsky e7a5b4aafd RDMA/device: Don't fire uevent before device is fully initialized
When the refcount is 0 the device is invisible to netlink. However in the
patch below the refcount = 1 was moved to after the device_add().  This
creates a race where userspace can issue a netlink query after the
device_add() event and not see the device as visible.

Ensure that no uevent is fired before device is fully registered.

Fixes: d79af7242b ("RDMA/device: Expose ib_device_try_get(()")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 13:02:43 -03:00
Gal Pressman f23afd75fc RDMA/efa: Add driver to Kconfig/Makefile
Add EFA Makefile and Kconfig.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 12:47:47 -03:00
Gal Pressman b7f5e880f3 RDMA/efa: Add the efa module
Add the main EFA module file which takes care of device
probe/initialization/registration/etc.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 12:47:47 -03:00
Gal Pressman 40909f664d RDMA/efa: Add EFA verbs implementation
Add a file that implements the EFA verbs.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07 12:47:47 -03:00
Linus Torvalds 81ff5d2cba Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "API:
   - Add support for AEAD in simd
   - Add fuzz testing to testmgr
   - Add panic_on_fail module parameter to testmgr
   - Use per-CPU struct instead multiple variables in scompress
   - Change verify API for akcipher

  Algorithms:
   - Convert x86 AEAD algorithms over to simd
   - Forbid 2-key 3DES in FIPS mode
   - Add EC-RDSA (GOST 34.10) algorithm

  Drivers:
   - Set output IV with ctr-aes in crypto4xx
   - Set output IV in rockchip
   - Fix potential length overflow with hashing in sun4i-ss
   - Fix computation error with ctr in vmx
   - Add SM4 protected keys support in ccree
   - Remove long-broken mxc-scc driver
   - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
  crypto: ccree - use a proper le32 type for le32 val
  crypto: ccree - remove set but not used variable 'du_size'
  crypto: ccree - Make cc_sec_disable static
  crypto: ccree - fix spelling mistake "protedcted" -> "protected"
  crypto: caam/qi2 - generate hash keys in-place
  crypto: caam/qi2 - fix DMA mapping of stack memory
  crypto: caam/qi2 - fix zero-length buffer DMA mapping
  crypto: stm32/cryp - update to return iv_out
  crypto: stm32/cryp - remove request mutex protection
  crypto: stm32/cryp - add weak key check for DES
  crypto: atmel - remove set but not used variable 'alg_name'
  crypto: picoxcell - Use dev_get_drvdata()
  crypto: crypto4xx - get rid of redundant using_sd variable
  crypto: crypto4xx - use sync skcipher for fallback
  crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
  crypto: crypto4xx - fix ctr-aes missing output IV
  crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
  crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
  crypto: ccree - handle tee fips error during power management resume
  crypto: ccree - add function to handle cryptocell tee fips error
  ...
2019-05-06 20:15:06 -07:00
Linus Torvalds dd4e5d6106 Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())
Remove mmiowb() from the kernel memory barrier API and instead, for
 architectures that need it, hide the barrier inside spin_unlock() when
 MMIO has been performed inside the critical section.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFaUACgkQt6xw3ITB
 YzRICQgAiv7wF/yIbBhDOmCNCAKDO59chvFQWxXWdGk/aAB56kwKAMXJgLOvlMG/
 VRuuLyParTFQETC3jaxKgnO/1hb+PZLDt2Q2KqixtjIzBypKUPWvK2sf6THhSRF1
 GK0DBVUd1rCrWrR815+SPb8el4xXtdBzvAVB+Fx35PXVNpdRdqCkK+EQ6UnXGokm
 rXXHbnfsnquBDtmb4CR4r2beH+aNElXbdt0Kj8VcE5J7f7jTdW3z6Q9WFRvdKmK7
 yrsxXXB2w/EsWXOwFp0SLTV5+fgeGgTvv8uLjDw+SG6t0E0PebxjNAflT7dPrbYL
 WecjKC9WqBxrGY+4ew6YJP70ijLBCw==
 =aC8m
 -----END PGP SIGNATURE-----

Merge tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull mmiowb removal from Will Deacon:
 "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())

  Remove mmiowb() from the kernel memory barrier API and instead, for
  architectures that need it, hide the barrier inside spin_unlock() when
  MMIO has been performed inside the critical section.

  The only relatively recent changes have been addressing review
  comments on the documentation, which is in a much better shape thanks
  to the efforts of Ben and Ingo.

  I was initially planning to split this into two pull requests so that
  you could run the coccinelle script yourself, however it's been plain
  sailing in linux-next so I've just included the whole lot here to keep
  things simple"

* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
  docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
  arch: Remove dummy mmiowb() definitions from arch code
  net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
  i40iw: Redefine i40iw_mmiowb() to do nothing
  scsi/qla1280: Remove stale comment about mmiowb()
  drivers: Remove explicit invocations of mmiowb()
  drivers: Remove useless trailing comments from mmiowb() invocations
  Documentation: Kill all references to mmiowb()
  riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
  powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
  ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  m68k/io: Remove useless definition of mmiowb()
  nds32/io: Remove useless definition of mmiowb()
  x86/io: Remove useless definition of mmiowb()
  arm64/io: Remove useless definition of mmiowb()
  ARM/io: Remove useless definition of mmiowb()
  mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
  ...
2019-05-06 16:57:52 -07:00
Gal Pressman e9c6c53730 RDMA/efa: Add common command handlers
Add the EFA common commands implementation.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 15:18:18 -03:00
Gal Pressman 0420e54256 RDMA/efa: Implement functions that submit and complete admin commands
Add admin commands submissions/completions implementation.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 15:18:18 -03:00
Gal Pressman cd9b3d5970 RDMA/efa: Add the com service API definitions
Header file for the various commands that can be sent through admin queue.
This includes queue create/modify/destroy, setting up and remove
protection domains, address handlers, and memory registration, etc.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 15:18:17 -03:00
Gal Pressman 43eaa49d51 RDMA/efa: Add the efa_com.h file
A helper header file for EFA admin queue, admin queue completion,
asynchronous notification queue, and various hardware configuration data
structures and functions.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 15:18:17 -03:00
Gal Pressman 853f565235 RDMA/efa: Add the efa.h header file
Add EFA driver generic header file defining driver's device independent
internal data structures and definitions.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 15:18:17 -03:00
Gal Pressman 01edac3aa2 RDMA/efa: Add EFA device definitions
EFA PCIe device implements a single Admin Queue (AQ) and Admin Completion
Queue (ACQ) pair to initialize and communicate configuration with the
device.  Through this pair, we run set/get commands for querying and
configuring the device, create/modify/destroy queues, and IB specific
commands like Address Handler (AH), Memory Registration (MR) and
Protection Domains (PD).

In addition to admin (AQ/ACQ), we have data path queues that get
classified as Queue Pairs (QP) and Completion Queues (CQ).

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:47:50 -03:00
Gal Pressman f95be3d28d RDMA: Add EFA related definitions
Add EFA driver ID to the IOCTL interface uapi. This patch also adds
unspecified node/transport type that will be used by EFA (usnic is left
unchanged as it's already part of our ABI).

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:47:50 -03:00
Shiraz Saleem db6c6774af RDMA/umem: Remove hugetlb flag
The drivers i40iw and bnxt_re no longer dependent on the hugetlb flag. So
remove this flag from ib_umem structure.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:08:11 -03:00
Shiraz Saleem d85582517e RDMA/bnxt_re: Use core helpers to get aligned DMA address
Call the core helpers to retrieve the HW aligned address to use for the
MR, within a supported bnxt_re page size.

Remove checking the umem->hugtetlb flag as it is no longer required. The
new DMA block iterator will return the 2M aligned address if the MR is
backed by 2M huge pages.

Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:08:11 -03:00
Shiraz Saleem eb52c0333f RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
Call the core helpers to retrieve the HW aligned address to use for the
MR, within a supported i40iw page size.

Remove code in i40iw to determine when MR is backed by 2M huge pages which
involves checking the umem->hugetlb flag and VMA inspection.  The new DMA
iterator will return the 2M aligned address if the MR is backed by 2M
pages.

Fixes: f26c7c8339 ("i40iw: Add 2MB page support")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:08:11 -03:00
Shiraz Saleem a808273a49 RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
This helper iterates over a DMA-mapped SGL and returns contiguous memory
blocks aligned to a HW supported page size.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:08:11 -03:00
Shiraz Saleem 4a35339958 RDMA/umem: Add API to find best driver supported page size in an MR
This helper iterates through the SG list to find the best page size to use
from a bitmap of HW supported page sizes. Drivers that support multiple
page sizes, but not mixed sizes in an MR can use this API.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 13:08:11 -03:00
Mike Marciniszyn 4c4b1996b5 IB/hfi1: Fix WQ_MEM_RECLAIM warning
The work_item cancels that occur when a QP is destroyed can elicit the
following trace:

 workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
 WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
 Call Trace:
  __flush_work.isra.29+0x8c/0x1a0
  ? __switch_to_asm+0x40/0x70
  __cancel_work_timer+0x103/0x190
  ? schedule+0x32/0x80
  iowait_cancel_work+0x15/0x30 [hfi1]
  rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
  rvt_destroy_qp+0x65/0x1f0 [rdmavt]
  ? _cond_resched+0x15/0x30
  ib_destroy_qp+0xe9/0x230 [ib_core]
  ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
  process_one_work+0x171/0x370
  worker_thread+0x49/0x3f0
  kthread+0xf8/0x130
  ? max_active_store+0x80/0x80
  ? kthread_bind+0x10/0x10
  ret_from_fork+0x35/0x40

Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.

The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.

Fixes: 0a226edd20 ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:57:45 -03:00
Leon Romanovsky 10bf13c334 RDMA/mlx5: Remove MAYEXEC flag
MAYEXEC flag was mistakenly added in the commit cited in the fixes line.

Fixes: 4eb6ab13b9 ("RDMA: Remove rdma_user_mmap_page")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:56:55 -03:00
Ariel Levkovich 33cde96fb5 IB/mlx5: Device resource control for privileged DEVX user
For DEVX users who have SYS_RAWIO capability, we set the internal device
resources capability when creating the UCTX.  This will allow the device
to restrict the allocation of internal device resources such as SW ICM
memory to privileged DEVX users only.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:51:51 -03:00
Ariel Levkovich 25c13324d0 IB/mlx5: Add steering SW ICM device memory type
This patch adds support for allocating, deallocating and registering a new
device memory type, STEERING_SW_ICM.  This memory can be allocated and
used by a privileged user for direct rule insertion and management of the
device's steering tables.

The type is provided by the user via the dedicated attribute in the
alloc_dm ioctl command.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:51:51 -03:00
Ariel Levkovich 4056b12efd IB/mlx5: Warn on allocated MEMIC buffers during cleanup
Adding a warning on allocated MEMIC buffers that weren't freed prior to
driver tear down.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:51:51 -03:00
Ariel Levkovich 3b113a1ec3 IB/mlx5: Support device memory type attribute
This patch intoruduces a new mlx5_ib driver attribute to the DM allocation
method - the DM type.

In order to allow addition of new types in downstream patches this patch
also refactors the allocation, deallocation and registration handlers to
consider the requested type and perform the necessary actions according to
it.

Since not all future device memory types will be such that are mapped to
user memory, the mandatory page index output attribute is modified to be
optional.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:51:50 -03:00
Leon Romanovsky 3a4ef2e2b5 RDMA/rdmavt: Catch use-after-free access of AH structures
Prior to commit d345691471 ("RDMA: Handle AH allocations by IB/core"),
AH destroy path is rdmavt returned -EBUSY warning to application and
caused to potential leakage of kernel memory of AH structure.

After that commit, the AH structure is always freed but such early return
in driver code can potentially cause to use-after-free error.

Add warning to catch such situation to help driver developers to fix AH
release path.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06 12:06:54 -03:00
Kirill Smelkov c5bf68fe0c *: convert stream-like files from nonseekable_open -> stream_open
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af34
("fs: stream_open - opener for stream-like files so that read and write
can run simultaneously without deadlock"), search and convert to
stream_open all in-kernel nonseekable_open users for which read and
write actually do not depend on ppos and where there is no other methods
in file_operations which assume @offset access.

I've verified each generated change manually - that it is correct to convert -
and each other nonseekable_open instance left - that it is either not correct
to convert there, or that it is not converted due to current stream_open.cocci
limitations. The script also does not convert files that should be valid to
convert, but that currently have .llseek = noop_llseek or generic_file_llseek
for unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Among cases converted 14 were potentially vulnerable to read vs write deadlock
(see details in 10dce8af34):

	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.

and the rest were just safe to convert to stream_open because their read and
write do not use ppos at all and corresponding file_operations do not
have methods that assume @offset file access(*):

	arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
	drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
	sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
	sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.

One can also recheck/review the patch via generating it with explanation comments included via

	$ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain"

(*) This second group also contains cases with read/write deadlocks that
stream_open.cocci don't yet detect, but which are still valid to convert to
stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c
calls wait_for_completion_interruptible() in its .read, but stream_open.cocci
currently detects only "wait_event*" as blocking.

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs]
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Jean Delvare <jdelvare@suse.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>	[watchdog/* hwmon/*]
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec]
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec]
Cc: Benson Leung <bleung@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome]
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*]
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Zwane Mwaikambo <zwanem@gmail.com>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06 17:46:41 +03:00
David S. Miller f3f050a4df mlx5-updates-2019-04-30
mlx5 misc updates:
 
 1) Bodong Wang and Parav Pandit (6):
    - Remove unused mlx5_query_nic_vport_vlans
    - vport macros refactoring
    - Fix vport access in E-Switch
    - Use atomic rep state to serialize state change
 
 2) Eli Britstein (2):
    - prio tag mode support, added ACLs and replace TC vlan pop with
      vlan 0 rewrite when prio tag mode is enabled.
 
 3) Erez Alfasi (2):
    - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions
    - mlx5e: ethtool, Add support for EEPROM high pages query
 
 4) Masahiro Yamada (1):
    - remove meaningless CFLAGS_tracepoint.o
 
 5) Maxim Mikityanskiy (1):
    - Put the common XDP code into a function
 
 6) Tariq Toukan (2):
    - Turn on HW tunnel offload in all TIRs
 
 7) Vlad Buslov (1):
    - Return error when trying to insert existing flower filter
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcyhIFAAoJEEg/ir3gV/o+LgsH/idNT42AQewm2gn1NAt/njRx
 hA/ILH4ZmqYD8tgme5q3lByGrGRTweCPQ92+/tYP1i90PL8EJKNFbRPXuORp+hUk
 m+ywoeyBHx0ZyDlAIGNDCFprY//jZV/3XQKuJhLUliGfN77lUSkVtIz2UY+cDr2U
 XBn0B3Fy54+XP7EqVHXdxRkLiwDCsDwZBF6O9/1cw/rKsly6fIzw1b7UVjFaFA8f
 1g5Ca/+v4X0Rsky1KOGLv8HVB4bxbiSZspAjKwVGJagPUNJMRR6xZyL+VNHWX71R
 N68VMQQbwg7XDDFQNtYAFSpxOkAY+wilkRDe7+3A50cFE8ZYYskwVJunvb75fCA=
 =oqb8
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2019-04-30

mlx5 misc updates:

1) Bodong Wang and Parav Pandit (6):
   - Remove unused mlx5_query_nic_vport_vlans
   - vport macros refactoring
   - Fix vport access in E-Switch
   - Use atomic rep state to serialize state change

2) Eli Britstein (2):
   - prio tag mode support, added ACLs and replace TC vlan pop with
     vlan 0 rewrite when prio tag mode is enabled.

3) Erez Alfasi (2):
   - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions
   - mlx5e: ethtool, Add support for EEPROM high pages query

4) Masahiro Yamada (1):
   - remove meaningless CFLAGS_tracepoint.o

5) Maxim Mikityanskiy (1):
   - Put the common XDP code into a function

6) Tariq Toukan (2):
   - Turn on HW tunnel offload in all TIRs

7) Vlad Buslov (1):
   - Return error when trying to insert existing flower filter
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:25:02 -04:00
Parav Pandit 943bd984b1 RDMA/core: Allow detaching gid attribute netdevice for RoCE
When there is active traffic through a GID, a QP/AH holds reference to
this GID entry. RoCE GID entry holds reference to its attached
netdevice. Due to this when netdevice is deleted by admin user, its
refcount is not dropped.

Therefore, while deleting RoCE GID, wait for all GID attribute's netdev
users to finish accessing netdev in rcu context.  Once all users done
accessing it, release the netdev refcount.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:03 -03:00
Parav Pandit dab2175800 RDMA/rxe: Use rdma_read_gid_attr_ndev_rcu to access netdev
Use rdma_read_gid_attr_ndev_rcu() to access netdevice attached to GID
entry under rcu lock.

This ensures that while working on the netdevice of the GID, it doesn't
get freed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:03 -03:00
Parav Pandit adb4a57a7a RDMA/cma: Use rdma_read_gid_attr_ndev_rcu to access netdev
To access the netdevice of the GID attribute, use an existing API
rdma_read_gid_attr_ndev_rcu().

This further reduces dependency on open access to netdevice of GID
attribute.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:03 -03:00
Parav Pandit a70c07397f RDMA: Introduce and use GID attr helper to read RoCE L2 fields
Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.

This moves logic from mlx5 driver to core for wider usage for RoCE ports.

This is a preparation patch to allow detaching netdev in subsequent patch.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:02 -03:00
Parav Pandit 8f97486024 IB/cm: Reduce dependency on gid attribute ndev check
GID type to path record type conversion can be done directly based on port
type and gid attribute type.  There is no need to find out using indirect
way by its GID attribute's ndev field.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:02 -03:00
Parav Pandit 3bf3e2b881 RDMA/rxe: Consider skb reserve space based on netdev of GID
Always consider the skb reserve space based on netdevice of the GID
attribute, regardless of vlan or non vlan netdevice.

Fixes: 43c9fc509f ("rdma_rxe: make rxe work over 802.1q VLAN devices")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 11:10:02 -03:00
Kamal Heib dd05cb828d RDMA: Get rid of iw_cm_verbs
Integrate iw_cm_verbs data members into ib_device_ops and ib_device
structs, this is done to achieve the following:

1) Avoid memory related bugs durring error unwind
2) Make the code more cleaner
3) Reduce code duplication

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 10:56:56 -03:00
Parav Pandit eb15c78b05 RDMA/core: Do not invoke init_port on compat devices
The driver interface cannot manipulate the sysfs of the compat device,
only of the full device so we must avoid calling the driver sysfs APIs on
compat devices.

This prevents an oops:

 Call Trace:
 dump_stack+0x5a/0x73
 kobject_init+0x74/0x80
 kobject_init_and_add+0x35/0xb0
 hfi1_create_port_files+0x6e/0x3c0 [hfi1]
 ib_setup_port_attrs+0x43b/0x560 [ib_core]
 add_one_compat_dev+0x16a/0x230 [ib_core]
 rdma_dev_init_net+0x110/0x160 [ib_core]
 ops_init+0x38/0xf0
 setup_net+0xcf/0x1e0
 copy_net_ns+0xb7/0x130
 create_new_namespaces+0x11a/0x1b0
 unshare_nsproxy_namespaces+0x55/0xa0
 ksys_unshare+0x1a7/0x340
 __x64_sys_unshare+0xe/0x20
 do_syscall_64+0x5b/0x180
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 5417783eab ("RDMA/core: Support core port attributes in non init_net")
Reported-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 10:41:23 -03:00
Artemy Kovalyov 1a418f7764 IB/core: Set qp->real_qp before it may be accessed
real_qp should be initialized before ib_destroy_qp() is called.
ib_destroy_qp() may be called in the error flow if ib_create_qp_security()
failed.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 10:17:45 -03:00
Jack Morgenstein 8f4426aa19 IB/mlx5: Add missing XRC options to QP optional params mask
The QP transition optional parameters for the various transition for XRC
QPs are identical to those for RC QPs.

Many of the XRC QP transition optional parameter bits are missing from the
QP optional mask table.  These omissions caused failures when doing XRC QP
state transitions.

For example, when trying to change the response timer of an XRC receive QP
via the RTS2RTS transition, the new timer value was ignored because
MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask
for XRC qps for the RTS2RTS transition.

Fix this by adding the missing XRC optional parameters for all QP
transitions to the opt_mask table.

Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Fixes: a4774e9095 ("IB/mlx5: Fix opt param mask according to firmware spec")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 10:15:13 -03:00
Shamir Rabinovitch 4f33dd41b2 RDMA/uverbs: Initialize uverbs_attr_bundle ucontext in ib_uverbs_get_context
ib_uverbs_get_context does not have a uobject so it does not call the
rdma_lookup_get_uobject which is used to set up the uverbs_attr_bundle
ucontext. For ib_uverbs_get_context we need to set up this manually before
we send the uverbs_attr_bundle down to the driver layer.

This completes the change that was done in commit 70f06b26f0 ("IB:
ucontext should be set properly for all cmd & ioctl paths")

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03 10:09:25 -03:00
David S. Miller ff24e4980a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02 22:14:21 -04:00
Gal Pressman f89adedaf3 RDMA/uverbs: Initialize udata struct on destroy flows
Cited commit introduced the udata parameter to different destroy flows
but the uapi method definition does not have udata (i.e has_udata flag
is not set). As a result, an uninitialized udata struct is being passed
down to the driver callbacks.

Fix that by clearing the driver udata even in cases where has_udata flag
is not set.

Fixes: c4367a2635 ("IB: Pass uverbs_attr_bundle down ib_x destroy path")
Cc: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-02 17:07:02 -03:00
Shiraz Saleem 7872168a83 RDMA/umem: Handle page combining avoidance correctly in ib_umem_add_sg_table()
The flag update_cur_sg tracks whether contiguous pages from a new set of
page_list pages can be merged into the SGE passed into
ib_umem_add_sg_table(). If this flag is true, but the total segment length
exceeds the max_seg_size supported by HW, we avoid combining to this SGE
and move to a new SGE (x) and merge 'len' pages to it. However, if i <
npages, the next iteration can incorrectly merge 'len' contiguous pages
into x instead of into a new SGE since update_cur_sg is still true.

Reset update_cur_sg to false always after the check to merge pages into
the first SGE passed in to ib_umem_add_sg_table().  Also, prevent a new
SGE's segment length from ever exceeding HW max_seg_sz.

There is a crash on hfi1 as result of this where-in max_seg_sz is
defaulting to 64K. Due to above bug, unfolding SGE's in __ib_umem_release
points to a bad page ptr.

 TEST comp-wfr.perfnative.STL-22166-WDT _ perftest native 2-Write_4097QP_4MB STARTING at 1555387093
 BUG: Bad page state in process ib_write_bw  pfn:7ebca0
 page:ffffcd675faf2800 count:0 mapcount:1 mapping:0000000000000000 index:0x1
 flags: 0x17ffffc0000000()
 raw: 0017ffffc0000000 dead000000000100 dead000000000200 0000000000000000
 raw: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
 page dumped because: nonzero mapcount
 CPU: 18 PID: 15853 Comm: ib_write_bw Tainted: G    B             5.1.0-rc4 #1
 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015
 Call Trace:
  dump_stack+0x5a/0x73
  bad_page+0xf5/0x10f
  free_pcppages_bulk+0x62c/0x680
  free_unref_page+0x54/0x70
  __ib_umem_release+0x148/0x1a0 [ib_uverbs]
  ib_umem_release+0x22/0x80 [ib_uverbs]
  rvt_dereg_mr+0x67/0xb0 [rdmavt]
  ib_dereg_mr_user+0x37/0x60 [ib_core]
  destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
  uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
  uobj_destroy+0x4d/0x60 [ib_uverbs]
  __uobj_get_destroy+0x33/0x50 [ib_uverbs]
  __uobj_perform_destroy+0xa/0x30 [ib_uverbs]
  ib_uverbs_dereg_mr+0x66/0x90 [ib_uverbs]
  ib_uverbs_write+0x3e1/0x500 [ib_uverbs]
  vfs_write+0xad/0x1b0
  ksys_write+0x5a/0xd0
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: d10bcf947a ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-02 16:50:12 -03:00
Saeed Mahameed c515e70d67 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
This merge commit includes some misc shared code updates from mlx5-next branch needed
for net-next.

1) From Aya: Enable general events on all physical link types and
   restrict general event handling of subtype DELAY_DROP_TIMEOUT in mlx5 rdma
   driver to ethernet links only as it was intended.

2) From Eli: Introduce low level bits for prio tag mode

3) From Maor: Low level steering updates to support RDMA RX flow
   steering and enables RoCE loopback traffic when switchdev is enabled.

4) From Vu and Parav: Two small mlx5 core cleanups

5) From Yevgeny add HW definitions of geneve offloads

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-05-01 13:57:48 -07:00
Gal Pressman 923abb9d79 RDMA/core: Introduce RDMA subsystem ibdev_* print functions
Similarly to dev/netdev/etc printk helpers, add standard printk helpers
for the RDMA subsystem.

Example output:
efa 0000:00:06.0 efa_0: Hello World!
efa_0: Hello World! (no parent device set)
(NULL ib_device): Hello World! (ibdev is NULL)

Cc: Jason Baron <jbaron@akamai.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-05-01 12:29:28 -04:00
Aya Levin 6cfdc7e468 IB/mlx5: Restrict 'DELAY_DROP_TIMEOUT' subtype to Ethernet interfaces
Subtype 'DELAY_DROP_TIMEOUT' (under 'GENERAL' event) is restricted to
Ethernet interfaces. This patch doesn't change functionality or breaks
current flow. In the downstream patch, non Ethernet (like IB) interfaces
will receive 'GENERAL' event.

Fixes: 5d3c537f90 ("net/mlx5: Handle event of power detection in the PCIE slot")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-29 16:55:05 -07:00
Vu Pham c42260f195 net/mlx5: Separate and generalize dma device from pci device
The mlx5 Sub-Function (SF) sub device will be introduced in
subsequent patches. It will be created as mediated device and
belong to mdev bus. It is necessary to treat dma operations on
PF, VF and SF in uniform way, hence reduce the dependency on
pdev pci dev struct and work directly out of newly introduced
'struct device' from previous patch.

This patch does not change any functionality.

Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-29 16:55:05 -07:00
Linus Torvalds 6a5c5d26c4 rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE use
The parameter to ZERO_PAGE() was wrong, but since all architectures
except for MIPS and s390 ignore it, it wasn't noticed until 0-day
reported the build error.

Fixes: 67f269b37f ("RDMA/ucontext: Fix regression with disassociate")
Cc: stable@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29 09:48:53 -07:00
Linus Torvalds 14f974d7f0 5.1 Third RC pull request
One core bug fix and a few driver ones
 
 - FRWR memory registration for hfi1/qib didn't work with with some iovas
   causing a NFSoRDMA failure regression due to a fix in the NFS side
 
 - A command flow error in mlx5 allowed user space to send a corrupt
   command (and also smash the kernel stack we've since learned)
 
 - Fix a regression and some bugs with device hot unplug that was
   discovered while reviewing Andrea's patches
 
 - hns has a failure if the user asks for certain QP configurations
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlzFkh8ACgkQOG33FX4g
 mxrWDQ/8CFK0TNGIf+LTQk2urQ5XAT0amNDNjEvi5kT4Vk2PFdkT5IZxlfK2FU+W
 68FKzP0zpUfSgz83BS26wBH939mJZV+4hUE/6ESyHtsEV9Hsin1zIgrraiad0l4E
 WOXQMB76rIzKLj1Ws1G8udW7Tr4d9tm0kNb/PQhlhZW8+yt6lsAcJRdoetKT+kYj
 WaSqJ+U2Y1LhOxHfc+w3M8NJOvIW3qx9ju7sx2RyIYxU46M4f4r+pT8Z25LnMrh1
 7PoOsfoDXZlng6UNueSmM1glTlRQDbiy3XdW4wQcvQABmmJfSLOLf9beeSn6pgPC
 YfNT6fznOTPGUrLhpiMMSsA5R6S/4cGZ9CVpGuojGl7VOWu/fr/Aja3JY2krNpWn
 jIcvh6nnGg5GuGTg/ZCmBYyAF22xbFmEmV7K0FP+dXZJyDVEiuC02j+JkTCknZYJ
 DaqzV/K/l1ROlKD+CBwWewrDztXjnxu3BvnNfMeAE9C8X/AGNdNY/86/IdIAgJSe
 QRrjf4rV8dqvb0i7lgkEe7swjwLoocjcM6OqMW42J35HUXjnkytrNhhZcgtQzSsq
 M1SM8ascnXE5OxIKfuAWQdHRR46rkgZVIsf8JLXaJQp+ZP55uiq355txwkeKgYrg
 oyC/7yuADZtXwEYsMDGgbI1RMpgMlAyAkDoPEumSol2LtmUNSgk=
 =K4Hb
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "One core bug fix and a few driver ones

   - FRWR memory registration for hfi1/qib didn't work with with some
     iovas causing a NFSoRDMA failure regression due to a fix in the NFS
     side

   - A command flow error in mlx5 allowed user space to send a corrupt
     command (and also smash the kernel stack we've since learned)

   - Fix a regression and some bugs with device hot unplug that was
     discovered while reviewing Andrea's patches

   - hns has a failure if the user asks for certain QP configurations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for mapping user db
  RDMA/ucontext: Fix regression with disassociate
  RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
  RDMA/mlx5: Do not allow the user to write to the clock page
  IB/mlx5: Fix scatter to CQE in DCT QP creation
  IB/rdmavt: Fix frwr memory registration
2019-04-28 10:00:45 -07:00
Johannes Berg 8cb081746c netlink: make validation more configurable for future strictness
We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:21 -04:00
Michal Kubecek ae0be8de9a netlink: make nla_nest_start() add NLA_F_NESTED flag
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.

Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().

Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:

@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)

@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:03:44 -04:00
David S. Miller 8b44836583 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two easy cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 23:52:29 -04:00
Matthew Wilcox b9b0f34531 uverbs: Convert idr to XArray
The word 'idr' is scattered throughout the API, so I haven't changed it,
but the 'idr' variable is now an XArray.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25 12:27:11 -03:00
Matthew Wilcox a7b36d5fa8 ib/bnxt: Remove mention of idr_alloc from comment
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25 12:02:18 -03:00
Lijun Ou 2557fabd6e RDMA/hns: Bugfix for mapping user db
When the maximum send wr delivered by the user is zero, the qp does not
have a sq.

When allocating the sq db buffer to store the user sq pi pointer and map
it to the kernel mode, max_send_wr is used as the trigger condition, while
the kernel does not consider the max_send_wr trigger condition when
mapmping db. It will cause sq record doorbell map fail and create qp fail.

The failed print information as follows:

 hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000
 hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff
 hns3 0000:7d:00.1: sq record doorbell map failed!
 hns3 0000:7d:00.1: Create RC QP failed

Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25 10:40:04 -03:00
Jason Gunthorpe 1d045aa76f Merge branch 'mlx5_tir_icm' into rdma.git for-next
Ariel Levkovich says:

====================
The series exposes the ICM address of the receive transport
interface (TIR) of Raw Packet and RSS QPs to the user since they are
required to properly create and insert steering rules that direct flows to
these QPs.
====================

For dependencies this branch is based on mlx5-next from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

* branch 'mlx5_tir_icm':
  IB/mlx5: Expose TIR ICM address to user space
  net/mlx5: Introduce new TIR creation core API
  net/mlx5: Expose TIR ICM address in command outbox

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25 10:33:00 -03:00
Ariel Levkovich 1f1d6abbf0 IB/mlx5: Expose TIR ICM address to user space
This patch exposes the TIR ICM address of raw packet and RSS
QPs to user space.

In order to pass the new field, the patch extends the mlx5
specific QP creation response structure and fills it with
the icm address returned by the FW command, if available.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25 10:03:19 -03:00
Eric Biggers 877b5691f2 crypto: shash - remove shash_desc::flags
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP.  These would all need to be fixed if any shash algorithm
actually started sleeping.  For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API.  However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk.  It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-25 15:38:12 +08:00
Jason Gunthorpe 449a224c10 Merge branch 'rdma_mmap' into rdma.git for-next
Jason Gunthorpe says:

====================
Upon review it turns out there are some long standing problems in BAR
mapping area:
 * BAR pages intended for read-only can be switched to writable via mprotect.
 * Missing use of rdma_user_mmap_io for the mlx5 clock BAR page.
 * Disassociate causes SIGBUS when touching the pages.
 * CPU pages are being mapped through to the process via remap_pfn_range
   instead of the more appropriate vm_insert_page, causing weird behaviors
   during disassociation.

This series adds the missing VM_* flag manipulation, adds faulting a zero
page for disassociation and revises the CPU page mappings to use
vm_insert_page.
====================

For dependencies this branch is based on for-rc from
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git

* branch 'rdma_mmap':
  RDMA: Remove rdma_user_mmap_page
  RDMA/mlx5: Use get_zeroed_page() for clock_info
  RDMA/ucontext: Fix regression with disassociate
  RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
  RDMA/mlx5: Do not allow the user to write to the clock page

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 16:20:34 -03:00
Jason Gunthorpe 4eb6ab13b9 RDMA: Remove rdma_user_mmap_page
Upon further research drivers that want this should simply call the core
function vm_insert_page(). The VMA holds a reference on the page and it
will be automatically freed when the last reference drops. No need for
disassociate to sequence the cleanup.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 16:18:36 -03:00
Jason Gunthorpe ddcdc368b1 RDMA/mlx5: Use get_zeroed_page() for clock_info
get_zeroed_page() returns a virtual address for the page which is better
than allocating a struct page and doing a permanent kmap on it.

Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 13:40:50 -03:00
Jason Gunthorpe 67f269b37f RDMA/ucontext: Fix regression with disassociate
When this code was consolidated the intention was that the VMA would
become backed by anonymous zero pages after the zap_vma_pte - however this
very subtly relied on setting the vm_ops = NULL and clearing the VM_SHARED
bits to transform the VMA into an anonymous VMA. Since the vm_ops was
removed this broke.

Now userspace gets a SIGBUS if it touches the vma after disassociation.

Instead of converting the VMA to anonymous provide a fault handler that
puts a zero'd page into the VMA when user-space touches it after
disassociation.

Cc: stable@vger.kernel.org
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Fixes: 5f9794dc94 ("RDMA/ucontext: Add a core API for mmaping driver IO memory")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 13:32:25 -03:00
Jason Gunthorpe d5e560d3f7 RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
Since mlx5 supports device disassociate it must use this API for all
BAR page mmaps, otherwise the pages can remain mapped after the device
is unplugged causing a system crash.

Cc: stable@vger.kernel.org
Fixes: 5f9794dc94 ("RDMA/ucontext: Add a core API for mmaping driver IO memory")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-04-24 13:06:40 -03:00
Jason Gunthorpe c660133c33 RDMA/mlx5: Do not allow the user to write to the clock page
The intent of this VMA was to be read-only from user space, but the
VM_MAYWRITE masking was missed, so mprotect could make it writable.

Cc: stable@vger.kernel.org
Fixes: 5c99eaecb1 ("IB/mlx5: Mmap the HCA's clock info to user-space")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-04-24 13:06:24 -03:00
John Fleck 3c176c9d72 IB/hfi1: Remove reference to RHF.VCRCErr
The bit VCRCErr in the receive header flag is actually a
reserved field. Remove bit operations on this field.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:48:11 -03:00
Mike Marciniszyn a9c62e0078 IB/hfi1: Add selected Rcv counters
These counters are required for error analysis and debug.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:48:10 -03:00
Mike Marciniszyn d40f69c9b9 IB/{rdmavt, qib, hfi1}: Use new routine to release reference counts
The reference count adjustments on reference count completion
are open coded throughout.

Add a routine to do all reference count adjustments and use.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:31:49 -03:00
Mike Marciniszyn 52cdbcc2b1 IB/rdmavt: Use more efficient allowed_ops
QP creation already records the allowed_ops.

Take advantage of that single field to replace multiple qp_type
specific tests.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:31:49 -03:00
Mike Marciniszyn 715ab1a862 IB/rdmavt: Fix ab/ba include issues
The currently include file ordering for rdmavt headers has an
ab/ba include issue the precludes using inlines from rdma_vt.h
in rdmavt_qp.h.

At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h.

Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h
and move qp related inlines to rdmavt_qp.h.

Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared
by rdmavt_cq.h and rdmavt_qp.h.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:31:49 -03:00
Mike Marciniszyn 62644c1d2b IB/hfi1: Make opfn.h self sufficient
The opfn.h include file build-ablility depends on the including file
having the correct includes.

Fix by making opfn.h self sufficient.

Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:31:49 -03:00
Kaike Wan ea752bc5e5 IB/{rdmavt, hfi1): Miscellaneous comment fixes
This patch fixes miscellaneous comment errors.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:31:48 -03:00
Josh Collier 07c5ba9124 IB/hfi1: Add debugfs to control expansion ROM write protect
Some kernels now enable CONFIG_IO_STRICT_DEVMEM which prevents multiple
handles to PCI resource0. In order to continue to support expansion ROM
updates while the driver is loaded, the driver must now provide an
interface to control the expansion ROM write protection.

This patch adds an exprom_wp debugfs interface that allows the hfi1_eprom
user tool to disable the expansion ROM write protection by opening the
file and writing a '1'.  The write protection is released when writing a
'0' or automatically re-enabled when the file handle is closed.  The
current implementation will only allow one handle to be opened at a time
across all hfi1 devices.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 11:26:41 -03:00
Leon Romanovsky 5742582222 RDMA/hns: Remove asynchronic QP destroy
Verbs destroy callbacks are synchronous operations and can't be delayed.
The expectation is that after driver returned from destroy function, the
memory can be freed and user won't be able to access it again.

Ditch workqueue implementation used in HNS driver.

Fixes: d838c481e0 ("IB/hns: Fix the bug when destroy qp")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: oulijun <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 10:55:31 -03:00
Parav Pandit 5d7ed2f27b RDMA/cma: Consider scope_id while binding to ipv6 ll address
When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.

listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X

However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.

In below example of two listeners, 2nd listener is failing with address in
use error.

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use

To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 10:39:16 -03:00
Parav Pandit 823b23da71 IB/core: Allow vlan link local address based RoCE GIDs
IPv6 link local address for a VLAN netdevice has nothing to do with its
resemblance with the default GID, because VLAN link local GID is in
different layer 2 domain.

Now that RoCE MAD packet processing and route resolution consider the
right GID index, there is no need for an unnecessary check which prevents
the addition of vlan based IPv6 link local GIDs.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24 10:08:15 -03:00
Saeed Mahameed c3bdd5e651 Linux 5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlyOup0eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHKoIAIKVuBSyD+m65TaM
 pjoAFa56weEc67Mmai2A84EOm0MVy9C6L7EOcOgVsJiLxDCYyWQ7xYwV2kceKJpW
 H5xauhb3+TxpxYeaeKdPPPHmBdejRwOPYvGAfnDMCqCCWQTad52sQUPCLI+yhF1t
 wgnuMi+SwNBWP9aYCXdFPK4fVhh27AcEAOEsRVCh4tIBH/wkf4GwrDr3IX1MFeMX
 jE/R43la4hu1swcWBsjkErWUasVPCgJSSQTfKDo9PQTVnoh0PHFp4fkOInVKLymQ
 7AGo+Knc+1he+sFsB2IbZwea0xqtJtjtr1oC+at8gNx66qVG+o7UZNi5LR1uPW4Z
 4+dwGBk=
 =pyXR
 -----END PGP SIGNATURE-----

Merge tag 'v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mlx5-next

Linux 5.1-rc1

We forgot to reset the branch last merge window thus mlx5-next is outdated
and still based on 5.0-rc2. This merge commit is needed to sync mlx5-next
branch with 5.1-rc1.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-22 15:25:39 -07:00
Mark Bloch 5fb58c9e2f RDMA/mlx5: Don't create IB representors when in multiport RoCE mode
Switchdev mode and mutiport RoCE mode aren't compatible at this point.
Don't create IB reps when a user switches to switchdev mode and the driver
operates in that mode.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Mark Bloch d3b5cc1cd9 RDMA/mlx5: Initialize roce port info before multiport master init
When working in mutliport RoCE mode it is possible to attach a slave
before the master. In that case the slave is waiting for a master to be
attached.  When the master is attached it goes over the list of waiting
slaves, finds a slave that is compatible and tries to bind it to itself.

The call stack is:
mlx5_ib_init_multiport_master() -> mlx5_ib_bind_slave_port()

In the bind function we will create a netdev notifier, but this is done
before we initialize the RoCE structure (this is done at a later stage by
the master in the ROCE stage).

Once events are delivered to that notifier we will use
mlx5_ib_get_native_port_mdev() to get the actual port and as the native
port is zero we will access an invalid index in the port structure.

Move the RoCE structure initialization to an earlier stage.

Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Mark Bloch 7f575103b0 RDMA/mlx5: Allow DEVX and raw creation flow on reps
Remove the limitations that were in place and provide support for DEVX and
raw flow creation on reps.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Maor Gottlieb 56e5acd405 RDMA/mlx5: Add query e-switch vport context to devx white list
Add MLX5_OP_QUERY_ESW_VPORT_CONTEXT to devx white list. It will be allowed
only if HCA_CAP.eswitch_manager==1.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Mark Bloch 52438be441 RDMA/mlx5: Allow inserting a steering rule to the FDB
Allow this only via mlx5 raw create flow API, legacy verbs are not
supported. To accommodate that, we add a new attribute to matcher creation
to indicate the type of flow table to be used.
	MLX5_IB_ATTR_FLOW_MATCHER_FT_TYPE
With this new attribute MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS is no longer
needed, we keep it for compatibility but at most only a single attribute can
be passed of the two.

When inserting a flow rule to the FDB we require that a DEVX FT is
provided as a destination, no other configuration is allowed.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Mark Bloch 3b70508a6b RDMA/mlx5: Create flow table with max size supported
Instead of failing the request, just use the supported number of flow
entries.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Mark Bloch 13a4376568 RDMA/mlx5: Access the prio bypass inside the FDB flow table namespace
Now that we have a specific prio inside the FDB namespace allow retrieving
it from the RDMA side.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 15:24:05 -03:00
Parav Pandit 2e5b8a0116 RDMA/core: Add a netlink command to change net namespace of rdma device
Provide an option to change the net namespace of a rdma device through a
netlink command. When multiple rdma devices exists in a system, and when
containers are used, this will limit rdma device visibility to a specified
net namespace.

An example command to change net namespace of mlx5_1 device to the
previously created net namespace 'foo' is:

$ ip netns add foo
$ rdma dev set mlx5_1 netns foo

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 14:44:58 -03:00
Parav Pandit decbc7a6b0 RDMA/core: Introduce a helper function to change net namespace of rdma device
Introduce a helper function that changes rdma device's net namespace which
performs mini disable/enable sequence to have device visible only in
assigned net namespace.

Device unregistration, device rename and device change net namespace
may be invoked concurrently.

(a) device unregistration needs to wait if a device change (rename or net
    namespace change) operation is in progress.
(b) device net namespace change should not proceed if the unregistration
    has started.
(c) while one cpu is changing device net namespace, other cpu should not
    be able to rename or change net namespace.

To address above concurrency,
(a) Use unreg_mutex to synchronize between ib_unregister_device() and net
    namespace change operation
(b) In cases where unregister_device() has started unregistration before
    change_netns got chance to acquire unreg_mutex, validate the refcount
    - if it dropped to zero, abort the net namespace change operation.

Finally use the helper function to change net namespace of ib device to
move the device back to init_net when such net is deleted.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 14:44:58 -03:00
Parav Pandit 3042492bd1 RDMA/core: Avoid freeing netdevs in disable_device()
So we can use the disable_device() helper while changing the net namespace
of the rdma device in a subsequent patch, move free_netdevs() out of it.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 14:44:58 -03:00
Chengguang Xu 2d95984977 infiniband/qib: Fix typo in comment
Fix typo 'faspath' -> 'pastpath'.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22 14:08:15 -03:00
Andrea Arcangeli 04f5866e41 coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
The core dumping code has always run without holding the mmap_sem for
writing, despite that is the only way to ensure that the entire vma
layout will not change from under it.  Only using some signal
serialization on the processes belonging to the mm is not nearly enough.
This was pointed out earlier.  For example in Hugh's post from Jul 2017:

  https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils

  "Not strictly relevant here, but a related note: I was very surprised
   to discover, only quite recently, how handle_mm_fault() may be called
   without down_read(mmap_sem) - when core dumping. That seems a
   misguided optimization to me, which would also be nice to correct"

In particular because the growsdown and growsup can move the
vm_start/vm_end the various loops the core dump does around the vma will
not be consistent if page faults can happen concurrently.

Pretty much all users calling mmget_not_zero()/get_task_mm() and then
taking the mmap_sem had the potential to introduce unexpected side
effects in the core dumping code.

Adding mmap_sem for writing around the ->core_dump invocation is a
viable long term fix, but it requires removing all copy user and page
faults and to replace them with get_dump_page() for all binary formats
which is not suitable as a short term fix.

For the time being this solution manually covers the places that can
confuse the core dump either by altering the vma layout or the vma flags
while it runs.  Once ->core_dump runs under mmap_sem for writing the
function mmget_still_valid() can be dropped.

Allowing mmap_sem protected sections to run in parallel with the
coredump provides some minor parallelism advantage to the swapoff code
(which seems to be safe enough by never mangling any vma field and can
keep doing swapins in parallel to the core dumping) and to some other
corner case.

In order to facilitate the backporting I added "Fixes: 86039bd3b4e6"
however the side effect of this same race condition in /proc/pid/mem
should be reproducible since before 2.6.12-rc2 so I couldn't add any
other "Fixes:" because there's no hash beyond the git genesis commit.

Because find_extend_vma() is the only location outside of the process
context that could modify the "mm" structures under mmap_sem for
reading, by adding the mmget_still_valid() check to it, all other cases
that take the mmap_sem for reading don't need the new check after
mmget_not_zero()/get_task_mm().  The expand_stack() in page fault
context also doesn't need the new check, because all tasks under core
dumping are frozen.

Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com
Fixes: 86039bd3b4 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 09:46:05 -07:00
David Howells 5dd50aaeb1
Make anon_inodes unconditional
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-19 14:03:11 +02:00
Colin Ian King ff5eefe6d3 RDMA/cxgb4: Fix spelling mistake "immedate" -> "immediate"
There is a spelling mistake in a module parameter description. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-18 03:17:42 -03:00
Guy Levi 7249c8ea22 IB/mlx5: Fix scatter to CQE in DCT QP creation
When scatter to CQE is enabled on a DCT QP it corrupts the mailbox command
since it tried to treat it as as QP create mailbox command instead of a
DCT create command.

The corrupted mailbox command causes userspace to malfunction as the
device doesn't create the QP as expected.

A new mlx5 capability is exposed to user-space which ensures that it will
not enable the feature on DCT without this fix in the kernel.

Fixes: 5d6ff1babe ("IB/mlx5: Support scatter to CQE for DC transport type")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-18 03:13:41 -03:00
David S. Miller 6b0a7f84ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflict resolution of af_smc.c from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 11:26:25 -07:00
Colin Ian King a6d2a5a92e RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure
Currently if alloc_skb fails to allocate the skb a null skb is passed to
t4_set_arp_err_handler and this ends up dereferencing the null skb.  Avoid
the NULL pointer dereference by checking for a NULL skb and returning
early.

Addresses-Coverity: ("Dereference null return")
Fixes: b38a0ad8ec ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-16 08:03:17 -03:00
Josh Collier 7c39f7f671 IB/rdmavt: Fix frwr memory registration
Current implementation was not properly handling frwr memory
registrations. This was uncovered by commit 27f26cec761das ("xprtrdma:
Plant XID in on-the-wire RDMA offset (FRWR)") in which xprtrdma, which is
used for NFS over RDMA, started failing as it was the first ULP to modify
the ib_mr iova resulting in the NFS server getting REMOTE ACCESS ERROR
when attempting to perform RDMA Writes to the client.

The fix is to properly capture the true iova, offset, and length in the
call to ib_map_mr_sg, and then update the iova when processing the
IB_WR_REG_MEM on the send queue.

Fixes: a41081aa59 ("IB/rdmavt: Add support for ib_map_mr_sg")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-16 07:11:29 -03:00
Colin Ian King 1db86318c4 RDMA/mlx5: Check for error return in flow_rule rather than err
Currently when the call to create_flow_rule_vport_sq fails, the error
check is being performed on err rather than on the return pointer
flow_rule.  The return flow_rule maybe NULL (which is not considered an
error) or an error code, so check for the error on flow_rule.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: d5ed8ac34c ("RDMA/mlx5: Move default representors SQ steering to rule to modify QP")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-12 11:19:49 -03:00
Devesh Sharma 1c00d7bc96 RDMA/ocrdma: Remove use of idr use pci bdf instead
Removing the use of IDR variable just to name the function ids. Using the
PCI_FUNC(pdev->devfn) instead to create the device name, associated
resources and to print driver into at various places.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-12 10:59:02 -03:00
Kaike Wan d737b25b1a IB/hfi1: Do not flush send queue in the TID RDMA second leg
When a QP is put into error state, the send queue will be flushed.
This mechanism is implemented in both the first and the second leg
of the send engine. Since the second leg is only responsible for
data transactions in the KDETH space for the TID RDMA WRITE request,
it should not perform the flushing of the send queue.

This patch removes the flushing function of the second leg, but
still keeps the bailing out of the QP if it is put into error state.

Fixes: 70dcb2e3dc ("IB/hfi1: Add the TID second leg send packet builder")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:09:30 -03:00
Mark Bloch fb652d3299 RDMA/mlx5: Remove VF representor profile
Now that we have a single IB device with multiple ports we can remove the
VF representor profile.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:40 -03:00
Mark Bloch 26628e2d58 RDMA/mlx5: Move to single device multiport ports in switchdev mode
Move from IB device (representor) per virtual function to single IB device
with port per virtual function (port 1 represents the uplink). As number
of ports is a static property of an IB device, declare the IB device with
as many port as the possible according to the PCI bus.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch a989ea01cb RDMA/mlx5: Move SMI caps logic
We store the SMI information in the core device's struct, make sure we set
that information only once (and not per port), while here make the for
loop based on the actual size of the array.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch 35b0aa67b2 RDMA/mlx5: Refactor netdev affinity code
The design of representors is such that once an IB representor is created,
the netdev of representor already exists, we can use that fact to simplify
the netdev affinity code.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch d5ed8ac34c RDMA/mlx5: Move default representors SQ steering to rule to modify QP
Currently the steering for SQs created on representors is done on
creation, once we move to representors as ports of an IB device we need
the port argument which is given only at the modify QP stage, adjust the
code appropriately.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch 6a4d00be08 RDMA/mlx5: Move rep into port struct
In preparation of moving into a model of single IB device multiple ports
move rep to be part of the port structure. We mark a representor device by
setting is_rep, no functional change with this patch.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch 5d8f6a0e92 RDMA/mlx5: Use correct size for device resources
On allocation we use the array size and on destruction num_ports, use the
array size of destruction as well, in this context the array corresponds
to the native/actual ports on the NIC so no need to adjust this logic for
representors.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch da796ccb3e RDMA/mlx5: Move ports allocation to outside of INIT stage
In downstream patches we will need access to the ports before doing any
stages, in order to set net device per representor.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch 4a6dc8552a RDMA/mlx5: Free IB device on remove
Simplify the code and move the deallocation of the IB device into the
remove function.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Mark Bloch 95579e785a RDMA/mlx5: Move netdev info into the port struct
Netdev info is stored in a separate array and holds data relevant on a per
port basis, move it to be part of the port struct.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 15:05:39 -03:00
Jason Gunthorpe 5331fa0db7 Merge branch 'mlx5-next' into rdma.git for-next
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies on the next series

* branch 'mlx5-next':
  net/mlx5: E-Switch, add a new prio to be used by the RDMA side
  net/mlx5: E-Switch, don't use hardcoded values for FDB prios
  net/mlx5: Fix false compilation warning
  net/mlx5: Expose MPEIN (Management PCIE INfo) register layout
  net/mlx5: Add rate limit print macros
  net/mlx5: Add explicit bar address field
  net/mlx5: Replace dev_err/warn/info by mlx5_core_err/warn/info
  net/mlx5: Use dev->priv.name instead of dev_name
  net/mlx5: Make mlx5_core messages independent from mdev->pdev
  net/mlx5: Break load_one into three stages
  net/mlx5: Function setup/teardown procedures
  net/mlx5: Move health and page alloc init to mdev_init
  net/mlx5: Split mdev init and pci init
  net/mlx5: Remove redundant init functions parameter
  net/mlx5: Remove spinlock support from mlx5_write64
  net/mlx5: Remove unused MLX5_*_DOORBELL_LOCK macros

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10 14:59:27 -03:00
Steve Wise ab7efbe24b RDMA/cxgb4: Use ib_device_set_netdev()
cxgb4 has a simple non-dynamic use of get_netdev, so conversion is
straightforward.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-09 10:14:54 -03:00
Jason Gunthorpe 4b38da75e0 RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()
Drivers that never change their ndev dynamically do not need to use
the get_netdev callback.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
2019-04-09 10:14:54 -03:00
David Ahern 1550c17193 ipv4: Prepare rtable for IPv6 gateway
To allow the gateway to be either an IPv4 or IPv6 address, remove
rt_uses_gateway from rtable and replace with rt_gw_family. If
rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway
to rt_gw4 to represent the IPv4 version.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 15:22:40 -07:00
Yangyang Li 00fb67ec6b RDMA/hns: Bugfix for SCC hem free
The method of hem free for SCC context is different from qp context.

In the current version, if free SCC hem during the execution of qp free,
there may be smmu error as below:

 arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
 arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
 arm-smmu-v3 arm-smmu-v3.1.auto:  0x000012000000017c
 arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000000009e0
 arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000000000000000

As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.

Fixes: 6a157f7d1b ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:42:16 -03:00
Lijun Ou 4772e03d23 RDMA/hns: Fix bug that caused srq creation to fail
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.

 Unable to handle kernel paging request at virtual address ffff00006e3cd000
 ...
 Call trace:
  hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
  hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
  hns_roce_create_srq+0x74c/0x808 [hns_roce]
  ib_create_srq+0x28/0xc8

Fixes: 0203b14c4f ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:27:58 -03:00
chenglang 2b277dae06 RDMA/hns: Support to create 1M srq queue
In mhop 0 mode, 64*bt_num queues can be supported.
In mhop 1 mode, 32K*bt_num queues can be supported.
Config srqc_hop_num to 1 to support 1M SRQ queues.

Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:26:44 -03:00
Shiraz Saleem d0b5c01bb4 RDMA/umem: Use correct value for SG entries in sg_copy_to_buffer()
With page combining, the assumption that number of SG entries in umem SGL
equal to number of system pages in umem no longer holds.

umem->sg_nents tracks the SG entries in umem SGL. Use it in
sg_pcopy_to_buffer() as opposed to ib_umem_num_pages(umem).

Fixes: d10bcf947a ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Reported-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Lijun Ou e1c9a0dc29 RDMA/hns: Dump detailed driver-specific CQ
This patch adds support of resource track for hip08 and take dumping cq
context state used for debugging as an example.  More resources track
supports for hns driver will be added in future.

The output should be as follows.
$ rdma res show cq dev hnseth0 -d
dev hnseth0 cqe 1023 users 2 poll-ctx WORKQUEUE pid 0 comm [ib_core] drv_state 2 drv_ceq
n 0 drv_cqn 0 drv_hopnum 1 drv_pi 0 drv_ci 0 drv_coalesce 0 drv_period 0 drv_cnt 0

Signed-off-by: Tao Tian <tiantao6@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Leon Romanovsky 68e326dea1 RDMA: Handle SRQ allocations by IB/core
Convert SRQ allocation from drivers to be in the IB/core

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Leon Romanovsky d345691471 RDMA: Handle AH allocations by IB/core
Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Jason Gunthorpe feec576a6a IB: When attrs.udata/ufile is available use that instead of uobject
The ucontext and ufile should not be accessed via the uobject, all these
cases have an attrs so use that instead.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Jason Gunthorpe e79c9c6062 IB/mlx5: Remove references to uboject->context
These should all go through udata now. Add mlx5_udata_to_mdev to convert
a udata into the struct mlx5_ib_dev as these call sites require.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Leon Romanovsky 9e886b39a7 RDMA/nldev: Return device protocol
Add new RDMA_NLDEV_ATTR_DEV_PROTOCOL attribute to give ability for UDEV
rules create IB device stable names based on link type protocol.  The
assumption that devices like mlx4 with duality in their link type under
one IB device struct won't be allowed in the future.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:25 -03:00
Leon Romanovsky c87e65cfb9 RDMA/cm: Move debug counters to be under relevant IB device
The sysfs layout is created by CM incorrectly presented RDMA devices with
InfiniBand link layer. Layout of such devices represents device tree of
connections. By moving CM statistics to be under relevant port of IB
device, we will fix the following issues:

 * Symlink name - It used device name instead of specific identifier.
 * Target location - It was supposed to point to PCI-ID/infiniband_cm/
   instead of PCI-ID/infiniband/
 * Target name - It created extra device file under already existing
   device folder, e.g. mlx5_0/mlx5_0
 * Crash during boot with RDMA persistent naming patches.

 sysfs: cannot create duplicate filename '/class/infiniband_cm/mlx5_0'
 CPU: 29 PID: 433 Comm: modprobe Not tainted 5.0.0-rc5+ #178
 Call Trace:
  dump_stack+0xcc/0x180
  sysfs_warn_dup.cold.3+0x17/0x2d
  sysfs_do_create_link_sd.isra.2+0xd0/0xf0
  device_add+0x7cb/0x1450
  device_create_groups_vargs+0x1ae/0x220
  device_create+0x93/0xc0
  cm_add_one+0x38f/0xf60 [ib_cm]
  add_client_context+0x167/0x210 [ib_core]
  enable_device_and_get+0x230/0x3f0 [ib_core]
  ib_register_device+0x823/0xbf0 [ib_core]
  __mlx5_ib_add+0x45/0x150 [mlx5_ib]
  mlx5_ib_add+0x1b3/0x5e0 [mlx5_ib]
  mlx5_add_device+0x130/0x3a0 [mlx5_core]
  mlx5_register_interface+0x1a9/0x270 [mlx5_core]
  do_one_initcall+0x14f/0x5de
  do_init_module+0x247/0x7c0
  load_module+0x4c2f/0x60d0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

After this change:
[leonro@server ~]$ ls -al /sys/class/infiniband/ibp0s12f0/ports/1/
drwxr-xr-x  2 root root    0 Mar 11 11:17 cm_rx_duplicates
drwxr-xr-x  2 root root    0 Mar 11 11:17 cm_rx_msgs
drwxr-xr-x  2 root root    0 Mar 11 11:17 cm_tx_msgs
drwxr-xr-x  2 root root    0 Mar 11 11:17 cm_tx_retries

Fixes: 110cf374a8 ("infiniband: make cm_device use a struct device and not a kobject.")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:24 -03:00
Colin Ian King 4d2e11d42f opa_vnic: fix check on record->event, incorrect operator used
The check on record->event is always true because the wrong operator
is being used, used && instead of ||

Addresses-Coverity: ("Constant expression result")
Fixes: fae7a699a9 ("opa_vnic: Convert vport_idr to XArray")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:24 -03:00
Shiraz Saleem d10bcf947a RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs
Combine contiguous regions of PAGE_SIZE pages into single scatter list
entry while building the scatter table for a umem. This minimizes the
number of the entries in the scatter list and reduces the DMA mapping
overhead, particularly with the IOMMU.

Set default max_seg_size in core for IB devices to 2G and do not combine
if we exceed this limit.

Also, purge npages in struct ib_umem as we now DMA map the umem SGL with
sg_nents and npage computation is not needed. Drivers should now be using
ib_umem_num_pages(), so fix the last stragglers.

Move npages tracking to ib_umem_odp as ODP drivers still need it.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Gal Pressman <galpress@amazon.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:24 -03:00
Kamal Heib ea7a5c706f RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_remove
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.

Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:04:46 -03:00
Will Deacon 1b8546d7e2 i40iw: Redefine i40iw_mmiowb() to do nothing
mmiowb() is now implicit in spin_unlock(), so there's no reason to call
it from driver code. Redefine i40iw_mmiowb() to do nothing instead.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 12:09:15 +01:00
Will Deacon fb24ea52f7 drivers: Remove explicit invocations of mmiowb()
mmiowb() is now implied by spin_unlock() on architectures that require
it, so there is no reason to call it from driver code. This patch was
generated using coccinelle:

	@mmiowb@
	@@
	- mmiowb();

and invoked as:

$ for d in drivers include/linux/qed sound; do \
spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done

NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation. If you've ended up bisecting to this commit, you can
reintroduce the mmiowb() calls using wmb() instead, which should restore
the old behaviour on all architectures other than some esoteric ia64
systems.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 12:01:02 +01:00
Will Deacon 949b8c7276 drivers: Remove useless trailing comments from mmiowb() invocations
In preparation for using coccinelle to remove all mmiowb() instances
from drivers, remove all trailing comments since they won't be picked up
by spatch later on and will end up being preserved in the code.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 12:00:56 +01:00
Saeed Mahameed b6460c72c3 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
This merge commit includes some misc shared code updates from mlx5-next branch needed
for net-next.

1) From Maxim, Remove un-used macros and spinlock from mlx5 code.

2) From Aya, Expose Management PCIE info register layout and add rate limit
print macros.

3) From Tariq, Compilation warning fix in fs_core.c

4) From Vu, Huy and Saeed, Improve mlx5 initialization flow:
The goal is to provide a better logical separation of mlx5 core
device initialization flow and will help to seamlessly support
creating different mlx5 device types such as PF, VF and SF
mlx5 sub-function virtual devices.

Mlx5_core driver needs to separate HCA resources from pci resources.
Its initialize/load/unload will be broken into stages:
1. Initialize common data structures
2. Setup function which initializes pci resources (for PF/VF)
   or some other specific resources for virtual device
3. Initialize software objects according to hardware capabilities
4. Load all mlx5_core components

It is also necessary to detach mlx5_core mdev name/message from pci
device mdev->pdev name/message for a clearer report/debug of
different mlx5 device types.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-05 14:10:16 -07:00
Leon Romanovsky c7252a6532 RDMA/cm: Remove useless zeroing of static global variable
Static global variables are initialized to zero by C standard,
there is no need to zero them again.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-04 08:29:04 -03:00
Potnuri Bharat Teja d2c33370ae RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state
On receiving a TERM from tje peer, Host moves the QP to TERMINATE state
and then moves the adapter out of RDMA mode. After issuing a TERM, peer
issues a CLOSE and at this point of time if the connectivity between peer
and host is lost for a significant amount of time, the QP remains in
TERMINATE state.

Therefore c4iw_modify_qp() needs to initiate a close on entering terminate
state.

Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-04 08:29:04 -03:00
Leon Romanovsky 0f51427bd0 RDMA/mlx5: Cleanup WQE page fault handler
Refactor the page fault handler to be more readable and extensible, this
cleanup was triggered by the error reported below. The code structure made
it unclear to the automatic tools to identify that such a flow is not
possible in real life because "requestor != NULL" means that "qp != NULL"
too.

    drivers/infiniband/hw/mlx5/odp.c:1254 mlx5_ib_mr_wqe_pfault_handler()
    error: we previously assumed 'qp' could be null (see line 1230)

Fixes: 08100fad5c ("IB/mlx5: Add ODP SRQ support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-04 08:28:59 -03:00
Jason Gunthorpe 1c726c4421 Merge HFI1 updates into k.o/for-next
Based on rdma.git for-rc for dependencies.

From Dennis Dalessandro:

====================

Here are some code improvement patches and fixes for less serious bugs to
TID RDMA than we sent for RC.

====================

* HFI1 updates:
  IB/hfi1: Implement CCA for TID RDMA protocol
  IB/hfi1: Remove WARN_ON when freeing expected receive groups
  IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE
  IB/hfi1: Add a function to read next expected psn from hardware flow
  IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:28:05 -03:00
Kaike Wan 747b931fbe IB/hfi1: Implement CCA for TID RDMA protocol
Currently, FECN handling is not implemented on TID RDMA expected receive
packets and therefore CCA can't be turned on when TID RDMA is
enabled. This patch adds the CCA support to TID RDMA protocol by:

- modifying FECN RSM rule to include kernel receive contexts

- For TID_RDMA READ RESP or TID RDMA ACK packet, a CNP will be sent out if
  the FECN bit is set. For other TID RDMA packets that generate at least
  one response packet, the BECN bit will be set in the first response
  packet

- Copying expected packet data to destination buffer when FECN bit is set
  in the TID RDMA READ RESP or TID RDMA WRITE DATA packet. In this case,
  the expected packet is received as an eager packet

- Handling the TID sequence error for subsequent normal expected packets.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:27:39 -03:00
Kaike Wan 8da0f0f26f IB/hfi1: Remove WARN_ON when freeing expected receive groups
When PSM user receive context is freed, the expected receive groups
allocated by the receive context will also been freed. However, if there
are still TID entries in use, the receive groups rcd->tid_full_list or
rcd->tid_used_list will not be empty, and thus triggering the WARN_ONs in
the function hfi1_free_ctxt_rcv_groups().  Even if the two lists may not
be empty, the hfi1 driver will free all TID entries and receive groups
associated with the receive context to prevent any resource leakage. Since
a clean user application exit is not controlled by the hfi1 driver, this
patch will remove the WARN_ONs in hfi1_free_ctxt_rcv_groups().

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:27:30 -03:00
Kaike Wan b885d5be9c IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE
For expected packet receiving, the hfi1 hardware checks the KDETH PSN
automatically. However, when sequence error occurs, the hfi1 driver can
check the sequence instead until the hardware flow generation is reloaded.

TID RDMA READ and WRITE protocols implement similar software checking
mechanisms, but with different flags and different local variables to
store next expected PSN.

Unify the handling by using only one set of flag and local variable for
both TID RDMA READ and WRITE protocols.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:27:30 -03:00
Kaike Wan 6a40693a88 IB/hfi1: Add a function to read next expected psn from hardware flow
This patch adds a function to read next expected KDETH PSN from hardware
flow to simplify the code.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:27:30 -03:00
Kaike Wan f6f3f53255 IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA
The reference of destination memory region is first obtained when TID RDMA
WRITE request is first received on the responder side. This reference is
released once all TID RDMA WRITE RESP packets are sent to the requester
side, even though not all TID RDMA WRITE DATA packets may have been
received. This early release will especially be undesired if the software
needs to access the destination memory before the last data packet is
received.

This patch delays the release of the MR until all TID RDMA DATA packets
have been received. A helper function to release the reference is also
created to simplify the code.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:27:30 -03:00
Leon Romanovsky 061ccb52d2 RDMA/cma: Set proper port number as index
Conversion from IDR to XArray missed the fact that idr_alloc() returned
index as a return value, this index was saved in port variable and used as
query index later on. This caused to the following error.

 BUG: KASAN: use-after-free in cma_check_port+0x86a/0xa20 [rdma_cm]
 Read of size 8 at addr ffff888069fde998 by task ucmatose/387
 CPU: 3 PID: 387 Comm: ucmatose Not tainted 5.1.0-rc2+ #253
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
 Call Trace:
  dump_stack+0x7c/0xc0
  print_address_description+0x6c/0x23c
  ? cma_check_port+0x86a/0xa20 [rdma_cm]
  kasan_report.cold.3+0x1c/0x35
  ? cma_check_port+0x86a/0xa20 [rdma_cm]
  ? cma_check_port+0x86a/0xa20 [rdma_cm]
  cma_check_port+0x86a/0xa20 [rdma_cm]
  rdma_bind_addr+0x11bc/0x1b00 [rdma_cm]
  ? find_held_lock+0x33/0x1c0
  ? cma_ndev_work_handler+0x180/0x180 [rdma_cm]
  ? wait_for_completion+0x3d0/0x3d0
  ucma_bind+0x120/0x160 [rdma_ucm]
  ? ucma_resolve_addr+0x1a0/0x1a0 [rdma_ucm]
  ucma_write+0x1f8/0x2b0 [rdma_ucm]
  ? ucma_open+0x260/0x260 [rdma_ucm]
  vfs_write+0x157/0x460
  ksys_write+0xb8/0x170
  ? __ia32_sys_read+0xb0/0xb0
  ? trace_hardirqs_off_caller+0x5b/0x160
  ? do_syscall_64+0x18/0x3c0
  do_syscall_64+0x95/0x3c0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Allocated by task 381:
   __kasan_kmalloc.constprop.5+0xc1/0xd0
   cma_alloc_port+0x4d/0x160 [rdma_cm]
   rdma_bind_addr+0x14e7/0x1b00 [rdma_cm]
   ucma_bind+0x120/0x160 [rdma_ucm]
   ucma_write+0x1f8/0x2b0 [rdma_ucm]
   vfs_write+0x157/0x460
   ksys_write+0xb8/0x170
   do_syscall_64+0x95/0x3c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 381:
   __kasan_slab_free+0x12e/0x180
   kfree+0xed/0x290
   rdma_destroy_id+0x6b6/0x9e0 [rdma_cm]
   ucma_close+0x110/0x300 [rdma_ucm]
   __fput+0x25a/0x740
   task_work_run+0x10e/0x190
   do_exit+0x85e/0x29e0
   do_group_exit+0xf0/0x2e0
   get_signal+0x2e0/0x17e0
   do_signal+0x94/0x1570
   exit_to_usermode_loop+0xfa/0x130
   do_syscall_64+0x327/0x3c0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: <syzbot+2e3e485d5697ea610460@syzkaller.appspotmail.com>
Reported-by: Ran Rozenstein <ranro@mellanox.com>
Fixes: 638267537a ("cma: Convert portspace IDRs to XArray")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:20:32 -03:00
Huy Nguyen aa8106f137 net/mlx5: Add explicit bar address field
Add bar_addr field to store bar-0 address to avoid calling
pci_resource_start with hard-coded bar-0 as parameter.
Also note that different mlx5 device types will have bar_addr
on different bars.

This patch does not change any functionality.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-02 12:49:38 -07:00
Maxim Mikityanskiy bbf29f618e net/mlx5: Remove spinlock support from mlx5_write64
As there is no user of mlx5_write64 that passes a spinlock to
mlx5_write64, remove this functionality and simplify the function.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-02 12:49:37 -07:00
Leon Romanovsky 6734b29735 RDMA/hns: Fix bad endianess of port_pd variable
port_pd is treated as le32 in declaration and read, fix assignment to be
in le32 too. This change fixes the following compilation warnings.

drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type
in assignment (different base types)
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype]

Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Lijun Ou <ouliun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-02 10:40:41 -03:00
Shamir Rabinovitch ff23dfa134 IB: Pass only ib_udata in function prototypes
Now when ib_udata is passed to all the driver's object create/destroy APIs
the ib_udata will carry the ib_ucontext for every user command. There is
no need to also pass the ib_ucontext via the functions prototypes.

Make ib_udata the only argument psssed.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 15:00:47 -03:00
Shamir Rabinovitch bdeacabd1a IB: Remove 'uobject->context' dependency in object destroy APIs
Now that we have the udata passed to all the ib_xxx object destroy APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 14:59:35 -03:00
Shamir Rabinovitch c4367a2635 IB: Pass uverbs_attr_bundle down ib_x destroy path
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 14:57:35 -03:00
Shamir Rabinovitch a6a3797df2 IB: Pass uverbs_attr_bundle down uobject destroy path
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will
use this to eliminate the dependecy of the drivers in ib_x->uobject
pointers.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 14:55:36 -03:00
Shamir Rabinovitch 70f06b26f0 IB: ucontext should be set properly for all cmd & ioctl paths
the Attempt to use the below commit to initialize the ucontext for the
uobject destroy path has shown that the below commit is incomplete.

Parts were reverted and the ucontext set up in the uverbs_attr_bundle was
moved to rdma_lookup_get_uobject which is called from the uobj_get_XXX
macros and rdma_alloc_begin_uobject which is called when uobject is
created.

Fixes: 3d9dfd0603 ("IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 14:55:03 -03:00
Matthew Wilcox fae7a699a9 opa_vnic: Convert vport_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 14:18:15 -03:00
Matthew Wilcox 059d48fbf6 qib: Convert qib_unit_table to XArray
Also remove qib_devs_list.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 13:31:35 -03:00
Matthew Wilcox 03b92789e5 hfi1: Convert hfi1_unit_table to XArray
Also remove hfi1_devs_list.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01 13:27:35 -03:00
Matthew Wilcox 9fd15987ed qedr: Convert srqidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-29 14:54:51 -03:00
Matthew Wilcox b6014f9e5f qedr: Convert qpidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-29 14:53:57 -03:00
David Ahern 3616d08bcb ipv6: Move ipv6 stubs to a separate header file
The number of stubs is growing and has nothing to do with addrconf.
Move the definition of the stubs to a separate header file and update
users. In the move, drop the vxlan specific comment before ipv6_stub.

Code move only; no functional change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:53:45 -07:00
Matthew Wilcox 0ee3b915b1 hfi1: Convert vesw_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-29 14:51:50 -03:00
Matthew Wilcox 736b5a70db RDMA/hns: Convert qp_table_tree to XArray
Also fully initialise the qp before storing it in the XArray.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-29 14:51:50 -03:00
Matthew Wilcox 27e19f4510 RDMA/hns: Convert cq_table to XArray
Change the locking to not disable interrupts as the lookup in interrupt
context will not see a freed CQ, thanks to the synchronize_irq() call
before freeing the CQ.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-29 14:40:40 -03:00
Parav Pandit 2b34c55802 RDMA/core: Add command to set ib_core device net namspace sharing mode
Add netlink command that enables/disables sharing rdma device among
multiple net namespaces.

Using rdma tool,
$rdma sys set netns shared (default mode)

When rdma subsystem netns mode is set to shared mode, rdma devices
will be accessible in all net namespaces.

Using rdma tool,
$rdma sys set netns exclusive

When rdma subsystem netns mode is set to exclusive mode, devices
will be accessible in only one net namespace at any given
point of time.

If there are any net namespaces other than default init_net exists,
while executing this command, it will fail and mode cannot be changed.

To change this mode, netlink command is used instead of sysctl, because
netlink command allows to auto load a module.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit cb7e0e1305 RDMA/core: Add interface to read device namespace sharing mode
Add an interface via netlink command to query whether rdma devices are
shared among multiple net namespaces or not. When using RDMAtool, it can
be queried as,

$rdma system show netns
netns shared

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit 37eeab55ae RDMA/core: Extend ib_device_get_by_index for net namespace
Extend ib_device_get_by_index() API to check device access for
net namespace for serving netlink commands.

Also enforce net ns check on dumpit commands which iterate over all
registered rdma devices and which don't call ib_device_get_by_index().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit 41c6140189 RDMA: Check net namespace access for uverbs, umad, cma and nldev
Introduce an API rdma_dev_access_netns() to check whether a rdma device
can be accessed from the specified net namespace or not.
Use rdma_dev_access_netns() while opening character uverbs, umad network
device and also check while rdma cm_id binds to rdma device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit a56bc45b27 RDMA/core: Add module param to disable device sharing among net ns
Add module parameter to change a sharing mode of ib_core early in the
boot process. This parameter helps to those systems where modern up
to date rdma tool (iproute2) package may not be available during
kernel upgrade cycle.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit 5417783eab RDMA/core: Support core port attributes in non init_net
Now that sysfs compatibility layer for non init_net exists, add core port
attributes such as pkey and gid table to non init_net ns.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit 4e0f7b9070 RDMA/core: Implement compat device/sysfs tree in net namespace
Implement compatibility layer sysfs entries of ib_core so that non
init_net net namespaces can also discover rdma devices.

Each non init_net net namespace has ib_core_device created in it.
Such ib_core_device sysfs tree resembles rdma devices found in
init_net namespace.

This allows discovering rdma devices in multiple non init_net net
namespaces via sysfs entries and helpful to rdma-core userspace.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit 62dfa7955e RDMA/core: Restrict sysfs entries view to init_net
This is a preparation patch to provide isolation of rdma device in a
network namespace.

As first step, make rdma device visible only in init net namespace.
Subsequent patch will enable rdma device visibility back in multiple net
namespaces using compat ib_core_device device/sysfs tree.

Given that the IB subsystem depends on net stack, it needs to be
initialized after netdev and since it support devices, it needs to be
initialized before the device subsystem; therefore, change initcall
sequence to fs_initcall, so that when ib_core is compiled in the kernel
image, the right init sequence is followed.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Parav Pandit cebe556bd7 RDMA/core: Introduce ib_core_device to hold device
In order to support sysfs entries in multiple net namespaces for a rdma
device, introduce a ib_core_device whose scope is limited to hold core
device and per port sysfs related entries.

This is preparation patch so that multiple ib_core_devices in each net
namespace can be created in subsequent patch who all can share ib_device.

(a) Move sysfs specific fields to ib_core_device.
(b) Make sysfs and device life cycle related routines to work on
    ib_core_device.
(c) Introduce and use rdma_init_coredev() helper to initialize
    coredev fields.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:52:02 -03:00
Shiraz Saleem 629e6f9db6 RDMA/rdmavt: Use correct sizing on buffers holding page DMA addresses
The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.

Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:13:27 -03:00
Shiraz Saleem 93923d309b RDMA/rxe: Use correct sizing on buffers holding page DMA addresses
The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.

Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:13:27 -03:00
Shiraz Saleem 41d34865b2 RDMA/mthca: Use correct sizing on buffers holding page DMA addresses
The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:13:27 -03:00
Shiraz Saleem 5f818d676a RDMA/cxbg: Use correct sizing on buffers holding page DMA addresses
The PBL array that hold the page DMA address is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this array.

Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:13:27 -03:00
Selvin Xavier 5aa8484080 RDMA/bnxt_re: Use correct sizing on buffers holding page DMA addresses
umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array access while iterating
the umem DMA-mapped SGL with umem page combining as umem->nmap can be
less than number of system pages in umem.

Use ib_umem_num_pages() instead of umem->nmap to size the page array.
Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 14:13:27 -03:00
Bart Van Assche 196b4ce57d IB/qib: Remove a set-but-not-used variable
This patch avoids that a compiler warning is reported when building with
W=1.

Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 49c0e2414b ("IB/qib: Change SDMA progression mode depending on single- or multi-rail")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 11:03:49 -03:00
Bart Van Assche 920d10e458 IB/hfi1: Fix two format strings
Enable format string checking for hfi1_cdbg() and fix the resulting
compiler warnings.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 11:03:49 -03:00
Bart Van Assche 1f687edee2 IB/mlx5: Declare devx_async_cmd_event_fops static
Avoid that sparse complains about a missing declaration.

Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 6bf8f22aea ("IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 10:22:48 -03:00
Bart Van Assche 0080aed4e4 RDMA/uverbs: Allow the compiler to verify declaration and definition consistency
This patch avoids that sparse reports the following warnings:

drivers/infiniband/core/uverbs_std_types_flow_action.c:442:30: warning: symbol 'uverbs_def_obj_flow_action' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_dm.c:112:30: warning: symbol 'uverbs_def_obj_dm' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_counters.c:153:30: warning: symbol 'uverbs_def_obj_counters' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_mr.c:213:30: warning: symbol 'uverbs_def_obj_mr' was not declared. Should it be static?

Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 0bd01f3d09 ("RDMA/uverbs: Require all objects to have a driver destroy function")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 10:22:48 -03:00
Bart Van Assche 2dcdebff5e RDMA/uverbs: Annotate uverbs_request_next_ptr() return value as a __user pointer
This patch avoids that sparse complains about a mismatch between the
returned value and the function return type.

Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: c3bea3d2dc ("RDMA/uverbs: Use the iterator for ib_uverbs_unmarshall_recv()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 10:22:48 -03:00
Bart Van Assche 259e66bcdf RDMA/uverbs: Add a __user annotation to a pointer
This patch avoids that sparse and smatch report the following:

  warning: cast removes address space of expression

Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 3a6532c9af ("RDMA/uverbs: Use uverbs_attr_bundle to pass udata for write")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-28 10:22:48 -03:00
David S. Miller 356d71e00d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-27 17:37:58 -07:00
Zhu Yanjun 08304d7146 IB/rxe: Replace av->network_type with skb->protocol
In the function rxe_init_packet, based on av->network_type, skb->protocol
is set to ipv4 or ipv6. The functions rxe_prepare and rxe_send are called
after the functin rxe_init_packet.  So in these functions,
av->network_type can be replaced with skb->protocol.

The functions are in the xmit fast path. So with skb->protocol, the
performance will be better.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 16:23:09 -03:00
Ira Weiny 2ccfbb70c2 IB/MAD: Add SMP details to MAD tracing
Decode more information from the packet and include it in the trace.

Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:52:01 -03:00
Ira Weiny 056533192a IB/UMAD: Add umad trace points
Trace MADs going to/from user space.

Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:52:01 -03:00
Ira Weiny 0e65bae205 IB/MAD: Add agent trace points
Trace agent details when agents are [un]registered.  In addition, report
agent details on send/recv.

Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:52:00 -03:00
Ira Weiny 821bf1de45 IB/MAD: Add recv path trace point
Trace received MAD details.

Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:52:00 -03:00
Ira Weiny 4d60cad5db IB/MAD: Add send path trace points
Use the standard Linux trace mechanism to trace MADs being sent.  4 trace
points are added, when the MAD is posted to the qp, when the MAD is
completed, if a MAD is resent, and when the MAD completes in error.

Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:52:00 -03:00
Yuval Shaia 6a1096611c RDMA/vmw_pvrdma: Skip zeroing device attrs
Caller already clears props before calling query_device.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:30:43 -03:00
Artemy Kovalyov d623dfd283 IB/mlx5: Compare only index part of a memory window rkey
The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY
WINDOWS says that if the CI supports the Base Memory Management Extensions
defined in this specification, the R_Key format for a Type 2 Memory Window
must consist of:

* 24 bit index in the most significant bits of the R_Key, which is owned
  by the CI, and
* 8 bit key in the least significant bits of the R_Key, which is owned by
  the Consumer.

This means that the kernel should compare only the index part of a R_Key
to determine equality with another R_Key.

Fixes: db570d7dea ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:27:56 -03:00
Artemy Kovalyov 1e5887b700 IB/mlx5: WQE dump jumps over first 16 bytes
Move index increment after its is used or otherwise it will start the dump
of the WQE from second WQE BB.

Fixes: 34f4c9554d ("IB/mlx5: Use fragmented QP's buffer for in-kernel users")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:27:33 -03:00
Moni Shoua 1abe186ed8 IB/mlx5: Reset access mask when looping inside page fault handler
If page-fault handler spans multiple MRs then the access mask needs to
be reset before each MR handling or otherwise write access will be
granted to mapped pages instead of read-only.

Cc: <stable@vger.kernel.org> # 3.19
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Reported-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:27:11 -03:00
Leon Romanovsky e95e52a178 RDMA/hns: Limit scope of hns_roce_cmq_send()
The forgotten static keyword causes to the following error to appear while
building HNS driver. Declare hns_roce_cmq_send() to be static function to
fix this warning.

drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1089:5: warning: no previous
prototype for _hns_roce_cmq_send_ [-Wmissing-prototypes]
 int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,

Fixes: 6a04aed6af ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:25:50 -03:00
Kaike Wan d029434447 IB/hfi1: Fix the allocation of RSM table
The receive side mapping (RSM) on hfi1 hardware is a special
matching mechanism to direct an incoming packet to a given
hardware receive context. It has 4 instances of matching capabilities
(RSM0 - RSM3) that share the same RSM table (RMT). The RMT has a total of
256 entries, each of which points to a receive context.

Currently, three instances of RSM have been used:
1. RSM0 by QOS;
2. RSM1 by PSM FECN;
3. RSM2 by VNIC.

Each RSM instance should reserve enough entries in RMT to function
properly. Since both PSM and VNIC could allocate any receive context
between dd->first_dyn_alloc_ctxt and dd->num_rcv_contexts, PSM FECN must
reserve enough RMT entries to cover the entire receive context index
range (dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt) instead of only
the user receive contexts allocated for PSM
(dd->num_user_contexts). Consequently, the sizing of
dd->num_user_contexts in set_up_context_variables is incorrect.

Fixes: 2280740f01 ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 14:34:31 -03:00
Kaike Wan a8639a79e8 IB/hfi1: Eliminate opcode tests on mr deref
When an old ack_queue entry is used to store an incoming request, it may
need to clean up the old entry if it is still referencing the
MR. Originally only RDMA READ request needed to reference MR on the
responder side and therefore the opcode was tested when cleaning up the
old entry. The introduction of tid rdma specific operations in the
ack_queue makes the specific opcode tests wrong.  Multiple opcodes (RDMA
READ, TID RDMA READ, and TID RDMA WRITE) may need MR ref cleanup.

Remove the opcode specific tests associated with the ack_queue.

Fixes: f48ad614c1 ("IB/hfi1: Move driver out of staging")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 14:34:31 -03:00
Kaike Wan 93b289b9af IB/hfi1: Clear the IOWAIT pending bits when QP is put into error state
When a QP is put into error state, it may be waiting for send engine
resources. In this case, the QP will be removed from the send engine's
waiting list, but its IOWAIT pending bits are not cleared. This will
normally not have any major impact as the QP is being destroyed.  However,
the QP still needs to wind down its operations, such as draining the send
queue by scheduling the send engine. Clearing the pending bits will avoid
any potential complications. In addition, if the QP will eventually hang,
clearing the pending bits can help debugging by presenting a consistent
picture if the user dumps the qp_stats.

This patch clears a QP's IOWAIT_PENDING_IB and IO_PENDING_TID bits in
priv->s_iowait.flags in this case.

Fixes: 5da0fc9dbf ("IB/hfi1: Prepare resource waits for dual leg")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 14:34:31 -03:00
Kaike Wan 662d664666 IB/hfi1: Failed to drain send queue when QP is put into error state
When a QP is put into error state, all pending requests in the send work
queue should be drained. The following sequence of events could lead to a
failure, causing a request to hang:

(1) The QP builds a packet and tries to send through SDMA engine.
    However, PIO engine is still busy. Consequently, this packet is put on
    the QP's tx list and the QP is put on the PIO waiting list. The field
    qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN;

(2) The QP is put into error state by the user application and
    notify_error_qp() is called, which removes the QP from the PIO waiting
    list and the packet from the QP's tx list. In addition, qp->s_flags is
    cleared of RVT_S_ANY_WAIT_IO bits, which does not include
    HFI1_S_WAIT_PIO_DRAIN bit;

(3) The hfi1_schdule_send() function is called to drain the QP's send
    queue. Subsequently, hfi1_do_send() is called. Since the flag bit
    HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails.  As
    a result, hfi1_do_send() bails out without draining any request from
    the send queue;

(4) The PIO engine completes the sending and tries to wake up any QP on
    its waiting list. But the QP has been removed from the PIO waiting
    list and therefore is kept in sleep forever.

The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2).
HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN.

Fixes: 2e2ba09e48 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags")
Cc: <stable@vger.kernel.org> # 4.19.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 14:34:31 -03:00
Colin Ian King 9513ea4f67 IB/iser: remove uninitialized variable len
The variable len is not being inintialized and the uninitialized value is
being returned. However, this return path is never reached because the
default case in the switch statement returns -ENOSYS.  Clean up the code
by replacing the return -ENOSYS with a break for the default case and
returning -ENOSYS at the end of the function.  This allows len to be
removed.  Also remove redundant break that follows a return statement.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 10:20:33 -03:00
Kangjie Lu e2a438bd71 RDMA/i40iw: Handle workqueue allocation failure
alloc_ordered_workqueue may fail and return NULL.  The fix captures the
failure and handles it properly to avoid potential NULL pointer
dereferences.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 10:19:07 -03:00
Ira Weiny 4ae2744410 IB/core: Ensure an invalidate_range callback on ODP MR
No device supports ODP MR without an invalidate_range callback.

Warn on any any device which attempts to support ODP without supplying
this callback.

Then we can remove the checks for the callback within the code.

This stems from the discussion

https://www.spinics.net/lists/linux-rdma/msg76460.html

...which concluded this code was no longer necessary.

Acked-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 16:39:40 -03:00
Leon Romanovsky a4b7013db2 RDMA/rxe: Fix slab-out-bounds access which lead to kernel crash later
BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573

CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Allocated by task 573:
 __kasan_kmalloc.constprop.5+0xc1/0xd0
 __kmalloc+0x161/0x310
 rxe_mem_alloc+0x52/0x470 [rdma_rxe]
 rxe_mem_init_user+0x113/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 0:
 __kasan_slab_free+0x12e/0x180
 kfree+0x10a/0x2c0
 rcu_process_callbacks+0xa77/0x1260
 __do_softirq+0x2ad/0xacb

Test scenario:
 ib_send_bw -x 1 -d rxe0 -a &
 ib_send_bw -x 1 -d rxe0 -a localhost

Fixes: 8700e3e7c4 ("Soft RoCE driver")
Reported-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 12:51:10 -03:00
Enrico Weigelt, metux IT consult 1a2e158327 drivers: infiniband: Fix whitespace in kconfig
Adjust the kconfig whitespace in bnxt_re/iser to match the kernel
standard.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 12:49:33 -03:00
Colin Ian King a6a9274a7c RDMA/nes: remove redundant check on udata
The non-null check on udata is redundant as this check was performed just
a few statements earlier and the check is always true as udata must be
non-null at this point. Remove redundant the check on udata and the
redundant else part that can never be executed.

Detected by CoverityScan, CID#1477317 ("Logically dead code")

Fixes: 8994445054 ("IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 12:07:45 -03:00
Matthew Wilcox 638267537a cma: Convert portspace IDRs to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 12:00:15 -03:00
Matthew Wilcox 81cc440883 ucm: Convert ctx_id_table to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 11:50:29 -03:00
Matthew Wilcox 8e5a9d61e2 ib core: Convert query_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 11:47:05 -03:00
Matthew Wilcox ae78ff3a0f RDMA/cm: Convert local_id_table to XArray
Also introduce cm_local_id() to reduce the amount of boilerplate when
converting a local ID to an XArray index.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 11:44:22 -03:00
Matthew Wilcox 949a237046 IB/mad: Convert ib_mad_clients to XArray
Pull the allocation function out into its own function to reduce the
length of ib_register_mad_agent() a little and keep all the allocation
logic together.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 11:36:20 -03:00
Matthew Wilcox f1430536e0 mlx4: Convert pv_id_table to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 10:09:54 -03:00
Matthew Wilcox b02a29eb88 mlx5: Convert mlx5_srq_table to XArray
Remove the custom spinlock as the XArray handles its own locking.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 09:39:42 -03:00
Mike Marciniszyn 270a9833b2 IB/hfi1: Add running average for adaptive pio
The adaptive PIO implementation only considers the current packet size
when deciding between SDMA and pio for a packet.

This causes credit return forces if small and large packets are
interleaved.

Add a running average to avoid costly credit forces so that a large
sequence of small packets is required to go below the threshold that
chooses pio.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26 09:33:21 -03:00
Erez Alfasi 19b1a294b0 RDMA: Use __packed annotation instead of __attribute__ ((packed))
"__attribute__" set of macros has been standardized, have became more
potentially portable and consistent code back in v2.6.21 by commit
82ddcb040 ("[PATCH] extend the set of "__attribute__" shortcut macros").
Moreover, nowadays checkpatch.pl warns about using __attribute__((packed))
instead of __packed.

This patch converts all the "__attribute__ ((packed))" annotations to
"__packed" within the RDMA subsystem.

Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 21:14:12 -03:00
Lijun Ou d0a935563b RDMA/hns: Delete unused variable in hns_roce_v2_modify_qp function
The src_mac array is not used in hns_roce_v2_modify_qp function.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 21:11:30 -03:00
Lijun Ou 82342e493b RDMA/hns: Bugfix for sending with invalidate
According to IB protocol, the send with invalidate operation will not
invalidate mr that was created through a register mr or reregister mr.

Fixes: e93df01085 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:56 -03:00
Lijun Ou 07c2339a91 RDMA/hns: Hide error print information with roce vf device
The driver should not print the error information when the hip08 driver
not support virtual function.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:55 -03:00
Lijun Ou 5b01b243b0 RDMA/hns: Only assgin some fields if the relatived attr_mask is set
According to IB protocol, some fields of qp context are filled with
optional when the relatived attr_mask are set. The relatived attr_mask
include IB_QP_TIMEOUT, IB_QP_RETRY_CNT, IB_QP_RNR_RETRY and
IB_QP_MIN_RNR_TIMER.  Besides, we move some assignments of the fields of
qp context into the outside of the specific qp state jump function.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:55 -03:00
Lijun Ou 834fa8cf6f RDMA/hns: Update the range of raq_psn field of qp context
According to hip08 UM(User Manual), the raq_psn field size is [23:0].

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:55 -03:00
Lijun Ou 601f3e6d06 RDMA/hns: Only assign the fields of the rq psn if IB_QP_RQ_PSN is set
Only when the IB_QP_RQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of rq'psn into the qp context when modified qp.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:55 -03:00
Lijun Ou f04cc17878 RDMA/hns: Only assign the relatived fields of psn if IB_QP_SQ_PSN is set
Only when the IB_QP_SQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of psn into the qp context when modified qp.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:59:55 -03:00
Matthew Wilcox 401b44804c cxgb4: Convert stid_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:56:36 -03:00
Matthew Wilcox 9f5a9632e4 cxgb4: Convert atid_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 20:56:36 -03:00
Matthew Wilcox f254ba6ae5 cxgb4: Convert hwtid_idr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:42:12 -03:00
Matthew Wilcox 7a268a9397 cxgb4: Convert mmidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:40:37 -03:00
Matthew Wilcox 2f43129127 cxgb4: Convert qpidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:39:18 -03:00
Matthew Wilcox 52e124c27e cxgb4: Convert cqidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:38:18 -03:00
Matthew Wilcox e64a7c02f1 cxgb3: Convert mmidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:36:29 -03:00
Matthew Wilcox 27114876ce cxgb3: Convert qpidr to XArray
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:35:08 -03:00
Matthew Wilcox a2f409713e cxgb3: Convert cqidr to XArray
It would make sense to convert this to an allocating XArray and remove the
kfifo that is currently used to allocate the CQID, but that work is better
done by someone who has the hardware to test with.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-25 15:34:22 -03:00
Paolo Abeni a350eccee5 net: remove 'fallback' argument from dev->ndo_select_queue()
After the previous patch, all the callers of ndo_select_queue()
provide as a 'fallback' argument netdev_pick_tx.
The only exceptions are nested calls to ndo_select_queue(),
which pass down the 'fallback' available in the current scope
- still netdev_pick_tx.

We can drop such argument and replace fallback() invocation with
netdev_pick_tx(). This avoids an indirect call per xmit packet
in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen)
with device drivers implementing such ndo. It also clean the code
a bit.

Tested with ixgbe and CONFIG_FCOE=m

With pktgen using queue xmit:
threads		vanilla 	patched
		(kpps)		(kpps)
1		2334		2428
2		4166		4278
4		7895		8100

 v1 -> v2:
 - rebased after helper's name change

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 11:18:55 -07:00
Feng Tang ec4fe4bcc5 i40iw: Avoid panic when handling the inetdev event
There is a panic reported that on a system with x722 ethernet, when doing
the operations like:

	# ip link add br0 type bridge
	# ip link set eno1 master br0
	# systemctl restart systemd-networkd

The system will panic "BUG: unable to handle kernel null pointer
dereference at 0000000000000034", with call chain:

	i40iw_inetaddr_event
	notifier_call_chain
	blocking_notifier_call_chain
	notifier_call_chain
	__inet_del_ifa
	inet_rtm_deladdr
	rtnetlink_rcv_msg
	netlink_rcv_skb
	rtnetlink_rcv
	netlink_unicast
	netlink_sendmsg
	sock_sendmsg
	__sys_sendto

It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while
the in->ifa_list is NULL.

So add a check for the "in->ifa_list == NULL" case, and skip the ARP
operation accordingly.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-17 21:40:40 -03:00
Aya Levin cd27287562 IB/mlx5: Fix mapping of link-mode to IB width and speed
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps.
Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps.

Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-17 21:40:39 -03:00
Yishai Hadas c5ae1954c4 IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling DRAIN DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.

In that case the DRAIN DCT command will be called and only once that it
will be completed the DESTROY DCT command will be called.  Otherwise, the
DESTROY DCT may fail and a hardware leak may occur.

As of that change the DRAIN DCT command should not be exposed any more
from DEVX, it's managed internally by the driver to work as expected by
the device specification.

Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-17 21:40:39 -03:00
Jack Morgenstein 587443e777 IB/mlx4: Fix race condition between catas error reset and aliasguid flows
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.

Fixes: a0c64a17ab ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-17 21:40:39 -03:00
Linus Torvalds ea295481b6 XArray updates for 5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu
 ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+
 w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz
 aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc
 pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL
 +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1
 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg==
 =HSP/
 -----END PGP SIGNATURE-----

Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax

Pull XArray updates from Matthew Wilcox:
 "This pull request changes the xa_alloc() API. I'm only aware of one
  subsystem that has started trying to use it, and we agree on the fixup
  as part of the merge.

  The xa_insert() error code also changed to match xa_alloc() (EEXIST to
  EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual
  bugfixes, optimisations and tweaking.

  I now have a git tree with all users of the radix tree and IDR
  converted over to the XArray that I'll be feeding to maintainers over
  the next few weeks"

* tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Fix xa_reserve for 2-byte aligned entries
  XArray: Fix xa_erase of 2-byte aligned entries
  XArray: Use xa_cmpxchg to implement xa_reserve
  XArray: Fix xa_release in allocating arrays
  XArray: Mark xa_insert and xa_reserve as must_check
  XArray: Add cyclic allocation
  XArray: Redesign xa_alloc API
  XArray: Add support for 1s-based allocation
  XArray: Change xa_insert to return -EBUSY
  XArray: Update xa_erase family descriptions
  XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-11 20:06:18 -07:00
Linus Torvalds 92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Linus Torvalds a50243b1dd 5.1 Merge Window Pull Request
This has been a slightly more active cycle than normal with ongoing core
 changes and quite a lot of collected driver updates.
 
 - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
 
 - A new data transfer mode for HFI1 giving higher performance
 
 - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
   feature
 
 - A chip hang reset recovery system for hns
 
 - Change mm->pinned_vm to an atomic64
 
 - Update bnxt_re to support a new 57500 chip
 
 - A sane netlink 'rdma link add' method for creating rxe devices and fixing
   the various unregistration race conditions in rxe's unregister flow
 
 - Allow lookup up objects by an ID over netlink
 
 - Various reworking of the core to driver interface:
   * Drivers should not assume umem SGLs are in PAGE_SIZE chunks
   * ucontext is accessed via udata not other means
   * Start to make the core code responsible for object memory
     allocation
   * Drivers should convert struct device to struct ib_device
     via a helper
   * Drivers have more tools to avoid use after unregister problems
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlyAJYYACgkQOG33FX4g
 mxrWwQ/+OyAx4Moru7Aix0C6GWxTJp/wKgw21CS3reZxgLai6x81xNYG/s2wCNjo
 IccObVd7mvzyqPdxOeyHBsJBbQDqWvoD6O2duH8cqGMgBRgh3CSdUep2zLvPpSAx
 2W1SvWYCLDnCuarboFrCA8c4AN3eCZiqD7z9lHyFQGjy3nTUWzk1uBaOP46uaiMv
 w89N8EMdXJ/iY6ONzihvE05NEYbMA8fuvosKLLNdghRiHIjbMQU8SneY23pvyPDd
 ZziPu9NcO3Hw9OVbkwtJp47U3KCBgvKHmnixyZKkikjiD+HVoABw2IMwcYwyBZwP
 Bic/ddONJUvAxMHpKRnQaW7znAiHARk21nDG28UAI7FWXH/wMXgicMp6LRcNKqKF
 vqXdxHTKJb0QUR4xrYI+eA8ihstss7UUpgSgByuANJ0X729xHiJtlEvPb1DPo1Dz
 9CB4OHOVRl5O8sA5Jc6PSusZiKEpvWoyWbdmw0IiwDF5pe922VLl5Nv88ta+sJ38
 v2Ll5AgYcluk7F3599Uh9D7gwp5hxW2Ph3bNYyg2j3HP4/dKsL9XvIJPXqEthgCr
 3KQS9rOZfI/7URieT+H+Mlf+OWZhXsZilJG7No0fYgIVjgJ00h3SF1/299YIq6Qp
 9W7ZXBfVSwLYA2AEVSvGFeZPUxgBwHrSZ62wya4uFeB1jyoodPk=
 =p12E
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm->pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...
2019-03-09 15:53:03 -08:00
Michael J. Ruhl bc5add0976 IB/hfi1: Close race condition on user context disable and close
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur.  Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.

cpu 0  (context cleanup)
    rc->ref_count-- (ref_count == 0)
    hfi1_rcd_free()
cpu 1  (IRQ (with rcd index))
	rcd_get_by_index()
	lock
	ref_count+++     <-- reference count race (WARNING)
	return rcd
	unlock
cpu 0
    hfi1_free_ctxtdata() <-- incorrect free location
    lock
    remove rcd from array
    unlock
    free rcd

This race will cause the following WARNING trace:

WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
Call Trace:
  dump_stack+0x19/0x1b
  __warn+0xd8/0x100
  warn_slowpath_null+0x1d/0x20
  hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
  is_rcv_urgent_int+0x24/0x90 [hfi1]
  general_interrupt+0x1b6/0x210 [hfi1]
  __handle_irq_event_percpu+0x44/0x1c0
  handle_irq_event_percpu+0x32/0x80
  handle_irq_event+0x3c/0x60
  handle_edge_irq+0x7f/0x150
  handle_irq+0xe4/0x1a0
  do_IRQ+0x4d/0xf0
  common_interrupt+0x162/0x162

The race can also lead to a use after free which could be similar to:

general protection fault: 0000 1 SMP
CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230
Call Trace:
  ? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
  hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
  hfi1_aio_write+0xba/0x110 [hfi1]
  do_sync_readv_writev+0x7b/0xd0
  do_readv_writev+0xce/0x260
  ? handle_mm_fault+0x39d/0x9b0
  ? pick_next_task_fair+0x5f/0x1b0
  ? sched_clock_cpu+0x85/0xc0
  ? __schedule+0x13a/0x890
  vfs_writev+0x35/0x60
  SyS_writev+0x7f/0x110
  system_call_fastpath+0x22/0x27

Use the appropriate kref API to verify access.

Reorder context cleanup to ensure context removal before cleanup occurs
correctly.

Cc: stable@vger.kernel.org # v4.14.0+
Fixes: f683c80ca6 ("IB/hfi1: Resolve kernel panics by reference counting receive contexts")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-06 14:47:09 -04:00
John Hubbard 0c507d8f84 RDMA/umem: Revert broken 'off by one' fix
The previous attempted bug fix overlooked the fact that
ib_umem_odp_map_dma_single_page() was doing a put_page() upon hitting an
error. So there was not really a bug there.

Therefore, this reverts the off-by-one change, but keeps the change to use
release_pages() in the error path.

Fixes: 75a3e6a3c1 ("RDMA/umem: minor bug fix in error handling path")
Suggested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-06 14:42:37 -04:00
Anshuman Khandual 98fa15f34c mm: replace all open encodings for NUMA_NO_NODE
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.

All these places for replacement were found by running the following
grep patterns on the entire kernel code.  Please let me know if this
might have missed some instances.  This might also have replaced some
false positives.  I will appreciate suggestions, inputs and review.

1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"

This patch (of 2):

At present there are multiple places where invalid node number is
encoded as -1.  Even though implicitly understood it is always better to
have macros in there.  Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE.  This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.

Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>	[ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk>			[mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org>			[dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au>		[powerpc]
Acked-by: Doug Ledford <dledford@redhat.com>		[drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:14 -08:00
John Hubbard 75a3e6a3c1 RDMA/umem: minor bug fix in error handling path
1. Bug fix: fix an off by one error in the code that cleans up if it fails
   to dma-map a page, after having done a get_user_pages_remote() on a
   range of pages.

2. Refinement: for that same cleanup code, release_pages() is better than
   put_page() in a loop.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 16:41:31 -04:00
YueHaibing 4e69cf1fe2 RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
The the below commit, hns_roce_v2_modify_qp is called inside spinlock
while using GFP_KERNEL. Change it to GFP_ATOMIC.

Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 16:41:30 -04:00
Shaobo He 952a3cc9c0 cxgb4: kfree mhp after the debug print
In function `c4iw_dealloc_mw`, variable mhp's value is printed after
freed, it is clearer to have the print before the kfree.

Otherwise racing threads could allocate another mhp with the same pointer
value and create confusing tracing.

Signed-off-by: Shaobo He <shaobo@cs.utah.edu>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 16:41:30 -04:00
Michael J. Ruhl d757c60eca IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
The RC/UC code path can go through a software loopback. In this code path
the receive side QP is manipulated.

If two threads are working on the QP receive side (i.e. post_send, and
modify_qp to an error state), QP information can be corrupted.

(post_send via loopback)
  set r_sge
  loop
     update r_sge
(modify_qp)
     take r_lock
     update r_sge <---- r_sge is now incorrect
(post_send)
     update r_sge <---- crash, etc.
     ...

This can lead to one of the two following crashes:

 BUG: unable to handle kernel NULL pointer dereference at (null)
  IP:  hfi1_copy_sge+0xf1/0x2e0 [hfi1]
  PGD 8000001fe6a57067 PUD 1fd9e0c067 PMD 0
 Call Trace:
  ruc_loopback+0x49b/0xbc0 [hfi1]
  hfi1_do_send+0x38e/0x3e0 [hfi1]
  _hfi1_do_send+0x1e/0x20 [hfi1]
  process_one_work+0x17f/0x440
  worker_thread+0x126/0x3c0
  kthread+0xd1/0xe0
  ret_from_fork_nospec_begin+0x21/0x21

or:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
  IP:  rvt_clear_mr_refs+0x45/0x370 [rdmavt]
  PGD 80000006ae5eb067 PUD ef15d0067 PMD 0
 Call Trace:
  rvt_error_qp+0xaa/0x240 [rdmavt]
  rvt_modify_qp+0x47f/0xaa0 [rdmavt]
  ib_security_modify_qp+0x8f/0x400 [ib_core]
  ib_modify_qp_with_udata+0x44/0x70 [ib_core]
  modify_qp.isra.23+0x1eb/0x2b0 [ib_uverbs]
  ib_uverbs_modify_qp+0xaa/0xf0 [ib_uverbs]
  ib_uverbs_write+0x272/0x430 [ib_uverbs]
  vfs_write+0xc0/0x1f0
  SyS_write+0x7f/0xf0
  system_call_fastpath+0x1c/0x21

Fix by using the appropriate locking on the receiving QP.

Fixes: 1570346153 ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Cc: <stable@vger.kernel.org> #v4.9+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 15:47:23 -04:00
Mike Marciniszyn 38bbc9f038 IB/rdmavt: Fix loopback send with invalidate ordering
The IBTA spec notes:

o9-5.2.1: For any HCA which supports SEND with Invalidate, upon receiving
an IETH, the Invalidate operation must not take place until after the
normal transport header validation checks have been successfully
completed.

The rdmavt loopback code does the validation after the invalidate.

Fix by relocating the operation specific logic for all SEND variants until
after the validity checks.

Cc: <stable@vger.kernel.org> #v4.20+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 15:47:23 -04:00
Max Gurtovoy c1545f1a20 IB/iser: Fix dma_nents type definition
The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid
future mismatch between types, define dma_nents as an integer instead of
unsigned.

Fixes: 57b26497fa ("IB/iser: Pass the correct number of entries for dma mapped SGL")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 15:40:25 -04:00
Moni Shoua 7095ec3ca0 IB/mlx5: Set correct write permissions for implicit ODP MR
The write access of an implicit MR is inherited to all of its children.
Therefore we must set the correct write access to the parent MR.

Pass full access_flags when creating umem to let it calculate write access
correctly.

Fixes: da6a496a34 ("IB/mlx5: Ranges in implicit ODP MR inherit its write access")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 10:57:19 -04:00
Devesh Sharma 0fca467e81 bnxt_re: Clean cq for kernel consumers only
Kernel space provider driver should clean the CQs belonging to kernel
space consumers only. The current implementation is doing reverse of it.

Fixing the same by avoiding the call to __clean_cq on a kernel qp during
destroy.

Fixes: c50866e285 ("bnxt_re: fix the regression due to changes in alloc_pbl")
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 10:51:14 -04:00
Jakub Kicinski f4b6bcc700 net: devlink: turn devlink into a built-in
Being able to build devlink as a module causes growing pains.
First all drivers had to add a meta dependency to make sure
they are not built in when devlink is built as a module.  Now
we are struggling to invoke ethtool compat code reliably.

Make devlink code built-in, users can still not build it at
all but the dynamically loadable module option is removed.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26 08:49:05 -08:00
Leon Romanovsky bb61845154 RDMA/uverbs: Don't do double free of allocated PD
There is no need to call kfree(pd) because ib_dealloc_pd() internally
frees PD.

Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-25 15:00:48 -07:00
David S. Miller 70f3522614 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.

The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.

However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 12:06:19 -08:00
Leon Romanovsky a2a074ef39 RDMA: Handle ucontext allocations by IB/core
Following the PD conversion patch, do the same for ucontext allocations.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-22 14:11:37 -07:00
Dan Carpenter afc1990e08 RDMA/core: Fix a WARN() message
The first parameter of WARN_ONCE() is a condition, then following
parameters are the message.  In this case, we left out the condition so it
will just print the ops->type string.

Fixes: 3856ec4b93 ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-22 11:53:37 -07:00
Devesh Sharma c50866e285 bnxt_re: fix the regression due to changes in alloc_pbl
While adding the use of for_each_sg_dma_page iterator for Brodcom's rdma
driver, there was a regression added in the __alloc_pbl path. The change
left bnxt_re in DOA state in for-next branch.

Fixing the regression to avoid the host crash when a user space object is
created. Restricting the unconditional access to hwq.pg_arr when hwq is
initialized for user space objects.

Fixes: 161ebe2498 ("RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL")
Reported-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-22 11:17:22 -07:00
Håkon Bugge 2612d723aa IB/mlx4: Increase the timeout for CM cache
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.

Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.

Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.

During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed

The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.

64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.

When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:

cm_rx_duplicates:
      dreq  2102
cm_rx_msgs:
      drep  1989
      dreq  6195
       rep  3968
       req  4224
       rtu  4224
cm_tx_msgs:
      drep  4093
      dreq 27568
       rep  4224
       req  3968
       rtu  3968
cm_tx_retries:
      dreq 23469

Note that the active/passive side is equally distributed between the
two nodes.

Enabling pr_debug in cm.c gives tons of:

[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!

By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:

cm_rx_duplicates:
      dreq  2460
[]
cm_tx_retries:
      dreq  3010
       req    47

Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.

Adjustment of the CMA timeout is not part of this commit.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-22 09:35:03 -07:00
Moni Shoua 4438ee3f13 IB/core: Abort page fault handler silently during owning process exit
It is possible that during a page fault handling, the process that owns
the MR is terminating. The indication for it is failure to get the
task_struct or take reference on the mm_struct. In this case just abort
the page-fault handler with error but without a warning to the kernel log.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 16:32:45 -07:00
Moni Shoua 81dd4c4be3 IB/mlx5: Validate correct PD before prefetch MR
When prefetching odp mr it is required to verify that pd of the mr is
identical to the pd for which the advise_mr request arrived with.

This check was missing from synchronous flow and is added now.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 16:32:45 -07:00
Moni Shoua a6bc3875f1 IB/mlx5: Protect against prefetch of invalid MR
When deferring a prefetch request we need to protect against MR or PD
being destroyed while the request is still enqueued.

The first step is to validate that PD owns the lkey that describes the MR
and that the MR that the lkey refers to is owned by that PD.

The second step is to dequeue all requests when MR is destroyed.

Since PD can't be destroyed while it owns MRs it is guaranteed that when a
worker wakes up the request it refers to is still valid.

Now, it is possible to refrain from taking a reference on the device since
it is assured to be present as pd.

While that, replace the dedicated ordered workqueue with the system
unbound workqueue to reuse an existing resource and improve
performance. This will also fix a bug of queueing to the wrong workqueue.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 16:32:45 -07:00
Leon Romanovsky 25fd08eb2b RDMA/uverbs: Store PR pointer before it is overwritten
The IB_MR_REREG_PD command rewrites mr->pd after successful
rereg_user_mr(), such change causes to lost usecnt information and
produces the following warning:

 WARNING: CPU: 1 PID: 1771 at drivers/infiniband/core/verbs.c:336 ib_dealloc_pd+0x4e/0x60 [ib_core]
 CPU: 1 PID: 1771 Comm: rereg_mr Tainted: G        W  OE 5.0.0-rc7-for-upstream-perf-2019-02-20_14-03-40-34 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 RIP: 0010:ib_dealloc_pd+0x4e/0x60 [ib_core]
 RSP: 0018:ffffc90003923dc0 EFLAGS: 00010286
 RAX: 00000000ffffffff RBX: ffff88821f7f0400 RCX: ffff888236a40c00
 RDX: ffff88821f7f0400 RSI: 0000000000000001 RDI: 0000000000000000
 RBP: 0000000000000001 R08: ffff88835f665d80 R09: ffff8882209c90d8
 R10: ffff88835ec003e0 R11: 0000000000000000 R12: ffff888221680ba0
 R13: ffff888221680b00 R14: 00000000ffffffea R15: ffff88821f53c318
 FS:  00007f70db11e740(0000) GS:ffff88835f640000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000001dfd030 CR3: 000000029d9d8000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  uverbs_free_pd+0x2d/0x30 [ib_uverbs]
  destroy_hw_idr_uobject+0x16/0x40 [ib_uverbs]
  uverbs_destroy_uobject+0x28/0x170 [ib_uverbs]
  __uverbs_cleanup_ufile+0x6b/0x90 [ib_uverbs]
  uverbs_destroy_ufile_hw+0x8b/0x110 [ib_uverbs]
  ib_uverbs_close+0x1f/0x80 [ib_uverbs]
  __fput+0xb1/0x220
  task_work_run+0x7f/0xa0
  exit_to_usermode_loop+0x6b/0xb2
  do_syscall_64+0xc5/0x100
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f70dad00664

Fixes: e278173fd1 ("RDMA/core: Cosmetic change - move member initialization to correct block")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 14:09:23 -07:00
Gustavo A. R. Silva 7264235ee7 IB/hfi1: Add missing break in switch statement
Fix the following warning by adding a missing break:

drivers/infiniband/hw/hfi1/tid_rdma.c: In function ‘hfi1_tid_rdma_wqe_interlock’:
drivers/infiniband/hw/hfi1/tid_rdma.c:3251:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   switch (prev->wr.opcode) {
   ^~~~~~
drivers/infiniband/hw/hfi1/tid_rdma.c:3259:2: note: here
  case IB_WR_RDMA_READ:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: c6c231175c ("IB/hfi1: Add interlock between TID RDMA WRITE and other requests")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kaike Wan <Kaike.wan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 14:08:12 -07:00
Jason Gunthorpe 815f748037 Merge branch 'mlx5-next' into rdma.git for-next
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

To resolve conflicts with net-next and pick up the first patch.

* branch 'mlx5-next':
  net/mlx5: Factor out HCA capabilities functions
  IB/mlx5: Add support for 50Gbps per lane link modes
  net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register
  net/mlx5: Add new fields to Port Type and Speed register
  net/mlx5: Refactor queries to speed fields in Port Type and Speed register
  net/mlx5: E-Switch, Avoid magic numbers when initializing offloads mode
  net/mlx5: Relocate vport macros to the vport header file
  net/mlx5: E-Switch, Normalize the name of uplink vport number
  net/mlx5: Provide an alternative VF upper bound for ECPF
  net/mlx5: Add host params change event
  net/mlx5: Add query host params command
  net/mlx5: Update enable HCA dependency
  net/mlx5: Introduce Mellanox SmartNIC and modify page management logic
  IB/mlx5: Use unified register/load function for uplink and VF vports
  net/mlx5: Use consistent vport num argument type
  net/mlx5: Use void pointer as the type in address_of macro
  net/mlx5: Align ODP capability function with netdev coding style
  mlx5: use RCU lock in mlx5_eq_cq_get()

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 12:40:18 -07:00
Davidlohr Bueso ec95e0fa21 drivers/IB,qib: Fix pinned/locked limit check in qib_get_user_pages()
The current check does not take into account the previous value of
pinned_vm; thus it is quite bogus as is. Fix this by checking the
new value after the (optimistic) atomic inc.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20 14:42:41 -07:00
Noa Osherovich d0e02bf6cd RDMA/core: Verify that memory window type is legal
Before calling the provider's alloc_mw function, verify that the
given memory type is either IB_MW_TYPE_1 or IB_MW_TYPE_2.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:19 -07:00
Leon Romanovsky 1882ab8678 RDMA/iwcm: Fix string truncation error
The strlen() check at the beginning of iw_cm_map() ensures that devname
and ifname strings are less than destinations to which they are supposed
to be copied. Change strncpy() call to be strcpy(), because we are
protected from overflow. Zero the entire string buffer to avoid copying
uninitialized kernel stack memory to userspace.

This fixes the compilation warning below:

In file included from ./include/linux/dma-mapping.h:6,
                 from drivers/infiniband/core/iwcm.c:38:
In function _strncpy_,
    inlined from _iw_cm_map_ at drivers/infiniband/core/iwcm.c:519:2:
./include/linux/string.h:253:9: warning: ___builtin_strncpy_ specified
bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: d53ec8af56 ("RDMA/iwcm: Don't copy past the end of dev_name() string")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:19 -07:00
Yuval Shaia e278173fd1 RDMA/core: Cosmetic change - move member initialization to correct block
old_pd is used only if IB_MR_REREG_PD flags is set.
For readability move it's initialization to where it is used.

While there rewrite the whole 'if-else' block so on error jump directly
to label and no need for 'else'

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:19 -07:00
Wei Yongjun 3b8f8b95d9 iw_cxgb4: Make function read_tcb() static
Fixes the following sparse warning:

drivers/infiniband/hw/cxgb4/cm.c:658:6: warning:
 symbol 'read_tcb' was not declared. Should it be static?

Fixes: 11a27e2121 ("iw_cxgb4: complete the cached SRQ buffers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:19 -07:00
Yangyang Li 6ac16e4039 RDMA/hns: Bugfix for set hem of SCC
The method of set hem for scc context is different from other contexts. It
should notify the hardware with the detailed idx in bt0 for scc, while for
other contexts, it only need to notify the bt step and the hardware will
calculate the idx.

Here fixes the following error when unloading the hip08 driver:

[  123.570768] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[  123.579023] {1}[Hardware Error]: event severity: recoverable
[  123.584670] {1}[Hardware Error]:  Error 0, type: recoverable
[  123.590317] {1}[Hardware Error]:   section_type: PCIe error
[  123.595877] {1}[Hardware Error]:   version: 4.0
[  123.600395] {1}[Hardware Error]:   command: 0x0006, status: 0x0010
[  123.606562] {1}[Hardware Error]:   device_id: 0000:7d:00.0
[  123.612034] {1}[Hardware Error]:   slot: 0
[  123.616120] {1}[Hardware Error]:   secondary_bus: 0x00
[  123.621245] {1}[Hardware Error]:   vendor_id: 0x19e5, device_id: 0xa222
[  123.627847] {1}[Hardware Error]:   class_code: 000002
[  123.632977] hns3 0000:7d:00.0: aer_status: 0x00000000, aer_mask: 0x00000000
[  123.639928] hns3 0000:7d:00.0: aer_layer=Transaction Layer, aer_agent=Receiver ID
[  123.647400] hns3 0000:7d:00.0: aer_uncor_severity: 0x00000000
[  123.653136] hns3 0000:7d:00.0: PCI error detected, state(=1)!!
[  123.658959] hns3 0000:7d:00.0: ROCEE uncorrected RAS error identified
[  123.665395] hns3 0000:7d:00.0: ROCEE RAS AXI rresp error
[  123.670713] hns3 0000:7d:00.0: requesting reset due to PCI error
[  123.676715] hns3 0000:7d:00.0: received reset event , reset type is 5
[  123.683147] hns3 0000:7d:00.0: AER: Device recovery successful
[  123.688978] hns3 0000:7d:00.0: PF Reset requested
[  123.693684] hns3 0000:7d:00.0: PF failed(=-5) to send mailbox message to VF
[  123.700633] hns3 0000:7d:00.0: inform reset to vf(1) failded -5!

Fixes: 6a157f7d1b ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Reviewed-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:19 -07:00