Commit Graph

287506 Commits

Author SHA1 Message Date
Eliad Peller 249e969889 wl12xx: set correct vif type in change_interface callback
In some cases, the wrong vif type was set in the
change_interface callback (P2P_CLIENT/P2P_GO instead
of STA/AP)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:25 +02:00
Eliad Peller b32b2b0f8e wl12xx: increment session_counter for device role as well
The sesssion_counter has to be incremented each time
the dev is started (similar to sta role).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller 9fd6f21ba2 wl12xx: set authorized AP on sta_state notification
wl12xx currently looks for AP authorization by registering
a netdev notifier and waiting for the IF_OPER_UP notification,
which is quite cumbersome.

Use the newly introduced sta_state callback (waiting
for assoc -> auth notification) instead, in order to
simplify it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller 2d6cf2b51f wl12xx: implement sta_state callback
Implement sta_state callback instead of the
sta_add/remove callbacks.

Update the fw regarding peer state and ht caps
only after the station was authorized. Otherwise,
the fw might try establishing BA session before
the sta is authorized.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller 8a6a84a471 wl12xx: consider bss_conf->idle instead of hw->conf.flags
On disassociation, check only whether the current vif
is idle, instead of checking whether the device is idle.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller 349345a4ec wl12xx: don't start dev role on ibss vifs
device role is used for scanning and sending packets
before connection. however, since we don't need to
send packets before ibss creation, there is no need
to start the device on idle-off.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
John W. Linville c288ec614e carl9170: fix breakage from "mac80211: handle non-bufferable MMPDUs correctly"
That commit intended for 3.4 renamed IEEE80211_TX_CTL_POLL_RESPONSE as
IEEE80211_TX_CTL_NO_PS_BUFFER.  Meanwhile, "carl9170: fix frame delivery
if sta is in powersave mode" added a reference to
IEEE80211_TX_CTL_POLL_RESPONSE in the fixes stream for 3.3.  This simple
patch fixes that merge boo-boo.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 15:08:33 -05:00
John W. Linville 8701ff0a88 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2012-02-29 14:53:21 -05:00
Zefir Kurtisi f4fb4b212d ath9k: decouple RX error checking for DFS
Previous RX error checking was done exclusive-or for different error
types and caused DFS pulse events to be dropped when other error
flags (e.g. CRC) were set simultaneously.

This patch decouples PHY error processing from other types and ensures
that all pulses detected by HW are accounted by the pattern detector.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:56 -05:00
Greg Dietsche aef6a62d8b iwlegacy: remove unused enum il4965_calib_enabled_state
Remove the enum il4965_calib_enabled_state because it is not used.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:55 -05:00
Greg Dietsche d7b6b6a643 iwlegacy: remove enum iw_calib and related code
Remove the enum il_calib. It defined one identifier: IL_CALIB_MAX.
Remove the function il4965_calib_free_results. It was doing nothing
because IL_CALIB_MAX is zero. Next, remove calib_results from the
il_priv structure and also remove the associated return
type/struct il_calib_result.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:55 -05:00
Greg Dietsche 08db1ab7fa iwlegacy: Kconfig: Change Debug Option to be more clear
Since the menuconfig system doesn't indent the debug options
for the 3945 /4965, add some text to make it clear which
debug options are being configured.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:55 -05:00
Greg Dietsche 649921499c iwlegacy: Kconfig: Move Debugging Options
Move the debug options so they appear below the 3945 / 4965 options.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:54 -05:00
Johannes Berg 02f2f1a951 mac80211: handle non-bufferable MMPDUs correctly
This renames the IEEE80211_TX_CTL_POLL_RESPONSE
TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also
uses it for non-bufferable MMPDUs (all MMPDUs but
deauth, disassoc and action frames.)

Previously, mac80211 would let the MMPDU through
but not set the flag so drivers supporting some
hardware aids for avoiding the PS races would
then reject the frame.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:14:54 -05:00
Amitkumar Karwar 5eb02e44ad mwifiex: remove unnecessary enum MWIFIEX_802_11_WEP_STATUS
Instead of defining an 'enum', we can simply use 'u8' flag for WEP
status. Rename 'wep_status' to 'wep_enabled' to match with
'wpa_enabled' and 'wpa2_enabled'.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:35 -05:00
Amitkumar Karwar 1a907b749c mwifiex: remove redundant scan operation
It should have been removed by commit "mwifiex: use cfg80211 dynamic
scan..." (7c6fa2a843..) after adding code to avoid an extra scan
during association because scan entries are valid for 15 seconds in
cfg80211 stack.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:35 -05:00
Johannes Berg 37ad38887d mac80211: make deauth/disassoc sequence more natural
The association sequence looks (roughly) like
this now:
 * set BSSID
 * set station to EXIST state
 * send auth
 * set station to AUTH state
 * send assoc
 * set station to ASSOC state
 * set BSS info to associated

In contrast, the deauth/disassoc sequence is
the other way around:
 * clear BSSID/BSS info state
 * remove station
 * send deauth/disassoc
(in some cases the last two steps are reversed.)

This patch encodes the entire sequence in the
ieee80211_set_disassoc() function and changes
it to be like this, for good measure with an
explicit flush:
 * send deauth/disassoc
 * flush
 * remove station
 * clear BSSID/BSS info state

At least iwlwifi gets confused with the other
sequence in P2P mode and complains that it
wasn't able to flush the queues.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:34 -05:00
Johannes Berg 02d83e60b9 mac80211: fix ieee80211_set_disassoc() sending DelBA
When ieee80211_set_disassoc() is called with the
tx argument set to true, it will send DelBA out
to the peer. This isn't useful or necessary in a
few cases where we do it today, those being when
we lost the connection or when the supplicant
explicitly asked us to not tell the AP.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:34 -05:00
Johannes Berg 5fef7dbcad mac80211: dont call cfg80211 from ieee80211_send_deauth_disassoc
Instead of calling cfg80211 in ieee80211_send_deauth_disassoc()
pass out the frame and call it from the caller. That saves the
SKB allocation if we don't actually want to send the frame and
enables us to make the ordering smarter in the future.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:34 -05:00
Johannes Berg 63c9c5e77c cfg80211: remove cookies from callbacks
In "cfg80211: no cookies in cfg80211_send_XXX()"
Holger Schurig removed the cookies in the calls
from mac80211 to cfg80211, but the ones in the
other direction were left in. Remove them now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:33 -05:00
Stanislav Yakovlev 4d94c157f8 ipw2x00: remove ipw2100_rates_11b[]
It's just a duplicate of ipw2100_bg_rates[].

Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:33 -05:00
Florian Fainelli 02f1434d4e zd1211rw: wait between setting hash table and powering radio on
I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem
XG-76NA 802.11bg stick.

Upon zd1211rw interface
bringup (ifconfig wlan0 up) I get the following timeout:

[  950.330573] zd1211rw 1-3:1.0: phy2
[  955.108510] zd1211rw 1-3:1.0: firmware version 4725
[  955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70
AL2230_RF pa0 g--NS
[snip]
[  955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110

A second ifconfig wlan0 up brings the interface up without problems.

After a bit more debugging, the call trace is the following:

[10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error
ioread32(CR_REG1): -110
[10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs
[10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on

Adding a 10 milliseconds delay between the call to set_mc_hash() and
zd_chip_switch_radio_on() allows successful interface bringups in all
cases and matches what the vendor driver did.

Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 14:11:32 -05:00
Amitkumar Karwar 00f157b497 mwifiex: reset encryption mode flag before association
Recent commit
"mwifiex: clear previous security setting during association"
fixes association failure problems observed in some corner cases
by clearing previous security setting before each association.

We should reset encryption mode flag as well. This patch takes care
of it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 13:08:52 -05:00
Christian Lamparter 9926a67557 carl9170: fix frame delivery if sta is in powersave mode
Nicolas Cavallari discovered that carl9170 has some
serious problems delivering data to sleeping stations.

It turns out that the driver was not honoring two
important flags (IEEE80211_TX_CTL_POLL_RESPONSE and
IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on
frames that should be sent although the receiving
station is still in powersave mode.

Cc: stable <stable@vger.kernel.org>
Reported-by: Nicolas Cavallari <Nicolas.Cavallari@lri.fr>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 13:08:51 -05:00
Nicolas Cavallari 992d52529d carl9170: Fix memory accounting when sta is in power-save mode.
On Access Point mode, when transmitting a packet, if the destination
station is in powersave mode, we abort transmitting the packet to the
device queue, but we do not reclaim the allocated memory.  Given enough
packets, we can go in a state where there is no packet on the device
queue, but we think the device has no memory left, so no packet gets
transmitted, connections breaks and the AP stops working.

This undo the allocation done in the TX path when the station is in
power-save mode.

Signed-off-by: Nicolas Cavallari <cavallar@lri.fr>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 13:08:51 -05:00
Arik Nemtsov d7b63b9fc7 wl12xx: increase dynamic PS timeout to 200ms
This ensures the user won't encounter lag associated with getting in and
out of PSM when the card is in use.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:25:11 +02:00
Arik Nemtsov b9239b6658 wl12xx: flush Tx during suspend and 802.11h chan switch
Flush our Tx queues before suspending or changing the channel due to a
channel_switch element in the AP beacon.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:25:10 +02:00
Arik Nemtsov 18aa755b84 wl12xx: flush all Tx queues on tx_flush timeout
Ensure our queues are empty at the end of a tx_flush(), in case we
timeout on passively waiting for them. This makes sure no left-overs are
transmitted when we are on the wrong channel.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:25:09 +02:00
Arik Nemtsov 49c9cd2644 wl12xx: avoid starving the system hlid
Re-factor the Tx scheduler so that the system_hlid is taken into account
before restarting an iteration over the wlvifs. Previously this
hlid had a lower priority and would starve if some wlvif had many
packets.
In addition avoid iterating over wlvifs past last_wlvif when performing
the a second pass. If we had packets in those wlvifs they would have
been found earlier.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:25:09 +02:00
Arik Nemtsov 6246ca003f wl12xx: reset link Tx queues when freeing it
Before, the link was first freed (invalidating it in the map), and later
on vif removal, all valid wlvif-related links were reset. Since these
links were already invalid, we failed to reset them.
The bug was made worse by op_stop, which set the tx_queue_count to 0
arbitrarily. This resulted in a negative tx_queue_count in some scenarios.

Fix this by resetting the Tx-queues of a link when freeing it. Add a
WARN_ON and reset all link Tx-queues in op_stop, to avoid a negative
tx_queue_count.

[changed WARN_ON to WARN_ON_ONCE -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:24:45 +02:00
Arik Nemtsov 0b0e32b792 wl12xx: change bits in the link_map under spin lock
These bits are used in op_tx to determine if a packet should be dropped.
As such we should use the spin lock to sync the state.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:19:19 +02:00
Arik Nemtsov 5af70c864a wl12xx: set the ELP entry delay to the FW dyn-ps timeout
With PSM handled in FW, the checks in wl1271_elp_work() are always true.
Thus during active traffic we constantly enter and exit ELP (many times
per second). As each ELP exit takes ~10ms, this can have an adverse
effect on throughput and interactivity.
Set the ELP timeout to the dyn-ps timeout. This period is longer and
avoids the above problem. It also makes sense to stay out of ELP while
we are awake on the network, to minimize delays in Tx/Rx. The same thing
was done by the mac80211 dynamic-ps mechanism before the FW DPS changes.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:19:19 +02:00
Emmanuel Grumbach 659373d515 iwlwifi: fix IDI compilation
This is a fixup for my:
iwlwifi: kill iwl_bus.h

Please fold them into one patch for upstream

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:57:24 -08:00
Wey-Yi Guy 378911233f iwlwifi: update pci subsystem id
Update the pci subsystem id and product name for 6005 series devices

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:57:17 -08:00
Wey-Yi Guy 259653d86b iwlwifi: one more sku added to 6x35 series
Add new sku to 6x35 series

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:57:11 -08:00
Emmanuel Grumbach e679378dc6 iwlwifi: iwl-trans.h doesn't need all these includes
We can use forward declaration for the relevant struct since they
aren't dereferenced in the header file.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:56:55 -08:00
Emmanuel Grumbach 53476fe11f iwlwifi: document the operational mode
Also add a might_sleep to enforce the context requirements.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:56:46 -08:00
Emmanuel Grumbach 4d660ce52e iwlwifi: remove iwl_reset_traffic_log from shared
It is op_mode related

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:56:39 -08:00
Emmanuel Grumbach 3e6895c50a iwlwifi: remove iwl_print_rx_config_cmd from shared
It is op_mode related

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:56:33 -08:00
Emmanuel Grumbach 36a79223c4 iwlwifi: kill iwl_bus.h
No one needs it any more

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:55:43 -08:00
Emmanuel Grumbach ca77d53484 iwlwifi: eeprom gets transport and not bus
This is temporary, but at least we can now throw the bus away
and move the iwl_pci_{probe,remove} functions.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:27:35 -08:00
Emmanuel Grumbach 90304749c3 iwlwifi: move eeprom defines to iwl-eeprom.c
They don't need to be in iwl-dev.h

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:27:27 -08:00
Emmanuel Grumbach ff6e75cb20 iwlwifi: remove a few dereferences to iwl_priv from the tansport
The transport should not dereference the iwl_priv pointer. Remove a
few of those.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:27:15 -08:00
Emmanuel Grumbach bcb9321c8d iwlwifi: virtualize op_mode's fw_error
Export it as "nic_error" notification, the error handling will be in
the op_mode.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:58 -08:00
Emmanuel Grumbach 7120d9894c iwlwifi: virtualize op_mode's set_hw_rf_kill
Export it as "hw_rf_kill" notification.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:53 -08:00
Emmanuel Grumbach 02e3835884 iwlwifi: virtualize op_mode's stop/start queue
Export them as "queue_full" and "queue_not_full" notification.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:47 -08:00
Emmanuel Grumbach db70f290e1 iwlwifi: virtualize op_mode's rx
This is the op_mode's Rx handler.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:40 -08:00
Emmanuel Grumbach ed277c9361 iwlwifi: virtualize op_mode's free skb
This handler allows the transport layer to free an skb from the
op_mode. This can happen when the driver is stopped while Tx
packets are pending in the transport layer.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:33 -08:00
Emmanuel Grumbach cbe6ab4e11 iwlwifi: use sparse compliant __aligned__ attribute
Sparse prefers __aligned(sizeof(void *));

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:09 -08:00
Emmanuel Grumbach d0f76d6869 iwlwifi: virtualize the op_mode
Define the op_mode as an interface with its ops. All the functions
of the op_mode are "private", but its ops is made public in
iwl-op-mode.h.
The drv object starts the op_mode by using the start function in the
public ops.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27 13:26:02 -08:00