Pages containing buffer_heads that are in one of the per-CPU buffer_head
LRU caches will be pinned and thus cannot be migrated. This can prevent
CMA allocations from succeeding, which are often used on platforms with
co-processors (such as a DSP) that can only use physically contiguous
memory. It can also prevent memory hot-unplugging from succeeding,
which involves migrating at least MIN_MEMORY_BLOCK_SIZE bytes of memory,
which ranges from 8 MiB to 1 GiB based on the architecture in use.
Correspondingly, invalidate the BH LRU caches before a migration starts
and stop any buffer_head from being cached in the LRU caches, until
migration has finished.
Link: https://lkml.kernel.org/r/20210319175127.886124-3-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Chris Goldsworthy <cgoldswo@codeaurora.org>
Reported-by: Laura Abbott <labbott@kernel.org>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Dias <joaodias@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the !CONFIG_BLOCK stub to the same place as the non-stub
declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All the callers have replaced attach_page_buffers with the new function
attach_page_private, so remove it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Andreas Dilger <adilger@dilger.ca>
Link: http://lkml.kernel.org/r/20200517214718.468-10-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit a8ac900b81 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.
However commit 85c8f176a6 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.
It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.
Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a6 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Bit spinlocks are problematic if PREEMPT_RT is enabled, because they
disable preemption, which is undesired for latency reasons and breaks when
regular spinlocks are taken within the bit_spinlock locked region because
regular spinlocks are converted to 'sleeping spinlocks' on RT.
PREEMPT_RT replaced the bit spinlocks with regular spinlocks to avoid this
problem. The replacement was done conditionaly at compile time, but
Christoph requested to do an unconditional conversion.
Jan suggested to move the spinlock into a existing padding hole which
avoids a size increase of struct buffer_head on production kernels.
As a benefit the lock gains lockdep coverage.
[ bigeasy: Remove the wrapper and use always spinlock_t and move it into
the padding hole ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20191118132824.rclhrbujqh4b4g4d@linutronix.de
Return type of ext4_page_mkwrite and ext4_filemap_fault are
changed to use vm_fault_t type.
With this patch all the callers of block_page_mkwrite_return()
are changed to handle vm_fault_t. So converting the return type
of block_page_mkwrite_return() to vm_fault_t.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
This function is only used by the iomap code, depends on being called
from it, and will soon stop poking into buffer head internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qeDb
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180204' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
It's expensive to set buffer flags that are already set, because that
causes a costly cache line transition.
A common case is setting the "verified" flag during ext4 writes.
This patch checks for the flag being set first.
With the AIM7/creat-clo benchmark testing on a 48G ramdisk based-on ext4
file system, we see 3.3%(15431->15936) improvement of aim7.jobs-per-min on
a 2-sockets broadwell platform.
What the benchmark does is: it forks 3000 processes, and each process do
the following:
a) open a new file
b) close the file
c) delete the file
until loop=100*1000 times.
The original patch is contributed by Andi Kleen.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kemi Wang <kemi.wang@intel.com>
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit e76004093d ("fs/buffer.c: remove unnecessary init
operation after allocating buffer_head"), there are no callers of
init_buffer() outside of init_page_buffers(). So just fold it into
init_page_buffers().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using FAT on a block device which supports rw_page, we can hit
BUG_ON(!PageLocked(page)) in try_to_free_buffers(). This is because we
call clean_buffers() after unlocking the page we've written. Introduce
a new clean_page_buffers() which cleans all buffers associated with a
page and call it from within bdev_write_page().
[akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew]
Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of adding weird retry logic in that function, utilize
__GFP_NOFAIL to ensure that the vm takes care of handling any
potential retries appropriately. This means we don't have to
call free_more_memory() from here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/GZI
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"Here are some changes for you for 4.13. For the most part it's fixes
for bugs and deadlock problems, and preparation for online fsck in
some future merge window.
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths"
* tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: don't crash on unexpected holes in dir/attr btrees
xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN
xfs: fix contiguous dquot chunk iteration livelock
xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA
vfs: Add iomap_seek_hole and iomap_seek_data helpers
vfs: Add page_cache_seek_hole_data helper
xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk
xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent
xfs: Check for m_errortag initialization in xfs_errortag_test
xfs: grab dquots without taking the ilock
xfs: fix semicolon.cocci warnings
xfs: Don't clear SGID when inheriting ACLs
xfs: free cowblocks and retry on buffered write ENOSPC
xfs: replace log_badcrc_factor knob with error injection tag
xfs: convert drop_writes to use the errortag mechanism
xfs: remove unneeded parameter from XFS_TEST_ERROR
xfs: expose errortag knobs via sysfs
xfs: make errortag a per-mountpoint structure
xfs: free uncommitted transactions during log recovery
xfs: don't allow bmap on rt files
...
I noticed on xfs that I could still sometimes get back an error on fsync
on a fd that was opened after the error condition had been cleared.
The problem is that the buffer code sets the write_io_error flag and
then later checks that flag to set the error in the mapping. That flag
perisists for quite a while however. If the file is later opened with
O_TRUNC, the buffers will then be invalidated and the mapping's error
set such that a subsequent fsync will return error. I think this is
incorrect, as there was no writeback between the open and fsync.
Add a new mark_buffer_write_io_error operation that sets the flag and
the error in the mapping at the same time. Replace all calls to
set_buffer_write_io_error with mark_buffer_write_io_error, and remove
the places that check this flag in order to set the error in the
mapping.
This sets the error in the mapping earlier, at the time that it's first
detected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Both ext4 and xfs implement seeking for the next hole or piece of data
in unwritten extents by scanning the page cache, and both versions share
the same bug when iterating the buffers of a page: the start offset into
the page isn't taken into account, so when a page fits more than two
filesystem blocks, things will go wrong. For example, on a filesystem
with a block size of 1k, the following command will fail:
xfs_io -f -c "falloc 0 4k" \
-c "pwrite 1k 1k" \
-c "pwrite 3k 1k" \
-c "seek -a -r 0" foo
In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048,
SEEK_DATA) will return the correct result.
Introduce a generic vfs helper for seeking in the page cache that gets
this right. The next commits will replace the filesystem specific
implementations.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[hch: dropped the export]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
_submit_bh() allowed submitting a buffer_head for I/O using custom
bio_flags. It used to be used by jbd to set BIO_SNAP_STABLE, introduced
by commit 7136851117 ("mm: make snapshotting pages for stable writes a
per-bio operation"). However, the code and flag has since been removed
and no _submit_bh() users remain.
These days, bio_flags are mostly used internally by the block layer to
track the state of bio's. As such, it doesn't really make sense for
filesystems to use them instead of op_flags when wanting special
behavior for block requests.
Therefore, remove _submit_bh() and trim the bio_flags argument from
submit_bh_wbc().
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.
Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.
Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper function that clears buffer heads from a block device
aliasing passed bh. Use this helper function from filesystems instead of
the original unmap_underlying_metadata() to save some boiler plate code
and also have a better name for the functionalily since it is not
unmapping anything for a *long* time.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Provide function equivalent to unmap_underlying_metadata() for a range
of blocks. We somewhat optimize the function to use pagevec lookups
instead of looking up buffer heads one by one and use page lock to pin
buffer heads instead of mapping's private_lock to improve scalability.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
gfs2 needs to be able to skip the check to see if a page is outside of
the file size when writing it out. gfs2 can get into a situation where
it needs to flush its in-memory log to disk while a truncate is in
progress. If the file being trucated has data journaling enabled, it is
possible that there are data blocks in the log that are past the end of
the file. gfs can't finish the log flush without either writing these
blocks out or revoking them. Otherwise, if the node crashed, it could
overwrite subsequent changes made by other nodes in the cluster when
it's journal was replayed.
Unfortunately, there is no way to add log entries to the log during a
flush. So gfs2 simply writes out the page instead. This situation can
only occur when the truncate code still has the file locked exclusively,
and hasn't marked this block as free in the metadata (which happens
later in truc_dealloc). After gfs2 writes this page out, the truncation
code will shortly invalidate it and write out any revokes if necessary.
In order to make this work, gfs2 needs to be able to skip the check for
writes outside the file size. Since the check exists in
block_write_full_page, this patch exports __block_write_full_page, which
doesn't have the check.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function currently called "__block_page_mkwrite()" used to be called
"block_page_mkwrite()" until a wrapper for this function was added by:
commit 24da4fab5a ("vfs: Create __block_page_mkwrite() helper passing
error values back")
This wrapper, the current "block_page_mkwrite()", is currently unused.
__block_page_mkwrite() is used directly by ext4, nilfs2 and xfs.
Remove the unused wrapper, rename __block_page_mkwrite() back to
block_page_mkwrite() and update the comment above block_page_mkwrite().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sb_getblk() is used during ext4 (and possibly other FSes) writeback
paths. Sometimes such path require allocating memory and guaranteeing
that such allocation won't block. Currently, however, there is no way
to provide user flags for sb_getblk which could lead to deadlocks.
This patch implements a sb_getblk_gfp with the only difference it can
accept user-provided GFP flags.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
A buffer cache is allocated from movable area because it is referred
for a while and released soon. But some filesystems are taking buffer
cache for a long time and it can disturb page migration.
New APIs are introduced to allocate buffer cache with user specific
flag. *_gfp APIs are for user want to set page allocation flag for
page cache allocation. And *_unmovable APIs are for the user wants to
allocate page cache from non-movable area.
Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013. It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue. This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.
The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.
Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara. I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.
JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages. This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.
This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback. An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode. By default the
page flags are obeyed.
Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
allows installation of a hidden inode designed for boot loaders.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GCT2
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Mostly performance and bug fixes, plus some cleanups. The one new
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
allows installation of a hidden inode designed for boot loaders."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4: fix type-widening bug in inode table readahead code
ext4: add check for inodes_count overflow in new resize ioctl
ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
ext4: fix online resizing for ext3-compat file systems
jbd2: trace when lock_buffer in do_get_write_access takes a long time
ext4: mark metadata blocks using bh flags
buffer: add BH_Prio and BH_Meta flags
ext4: mark all metadata I/O with REQ_META
ext4: fix readdir error in case inline_data+^dir_index.
ext4: fix readdir error in the case of inline_data+dir_index
jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
ext4: mext_insert_extents should update extent block checksum
ext4: move quota initialization out of inode allocation transaction
ext4: reserve xattr index for Rich ACL support
jbd2: reduce journal_head size
ext4: clear buffer_uninit flag when submitting IO
ext4: use io_end for multiple bios
ext4: make ext4_bio_write_page() use BH_Async_Write flags
ext4: Use kstrtoul() instead of parse_strtoul()
ext4: defragmentation code cleanup
...
Walking a bio's page mappings has proved problematic, so create a new
bio flag to indicate that a bio's data needs to be snapshotted in order
to guarantee stable pages during writeback. Next, for the one user
(ext3/jbd) of snapshotting, hook all the places where writes can be
initiated without PG_writeback set, and set BIO_SNAP_STABLE there.
We must also flag journal "metadata" bios for stable writeout, since
file data can be written through the journal. Finally, the
MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get
rid of it.
[akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration]
[akpm@linux-foundation.org: teeny cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add buffer_head flags so that buffer cache writebacks can be marked
with the the appropriate request flags, so that metadata blocks can be
marked appropriately in blktrace.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We want to add a trace point to touch_buffer() but macros and inline
functions defined in header files can't have tracing points. Move
touch_buffer() to fs/buffer.c and make it a proper function.
The new exported function is also declared inline. As most uses of
touch_buffer() are inside buffer.c with nilfs2 as the only other user,
the effect of this change should be negligible.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not allow file modification via mmap while the filesystem is
frozen. So block in block_page_mkwrite() while the filesystem is frozen.
We cannot do the blocking wait in __block_page_mkwrite() since e.g. ext4
will want to call that function with transaction started in some cases
and that would deadlock. But we can at least do the non-blocking reliable
check in __block_page_mkwrite() which is the hardest part anyway.
We have to check for frozen filesystem with the page marked dirty and under
page lock with which we then return from ->page_mkwrite(). Only that way we
cannot race with writeback done by freezing code - either we mark the page
dirty after the writeback has started, see freezing in progress and block, or
writeback will wait for our page lock which is released only when the fault is
done and then writeback will writeout and writeprotect the page again.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Create __block_page_mkwrite() helper which does all what block_page_mkwrite()
does except that it passes back errors from __block_write_begin /
block_commit_write calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions. Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This flag was only set for barrier buffers, which we don't submit
anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Now that the backend conversion is complete, export sequenced
FLUSH/FUA capability through REQ_FLUSH/FUA flags. REQ_FLUSH means the
device cache should be flushed before executing the request. REQ_FUA
means that the data in the request should be on non-volatile media on
completion.
Block layer will choose the correct way of implementing the semantics
and execute it. The request may be passed to the device directly if
the device can handle it; otherwise, it will be sequenced using one or
more proxy requests. Devices will never see REQ_FLUSH and/or FUA
which it doesn't support.
Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are
never failed with -EOPNOTSUPP. If the underlying device doesn't
support FLUSH/FUA, the block layer simply make those noop. IOW, it no
longer distinguishes between writeback cache which doesn't support
cache flush and writethrough/no cache. Devices which have WB cache
w/o flush are very difficult to come by these days and there's nothing
much we can do anyway, so it doesn't make sense to require everyone to
implement -EOPNOTSUPP handling. This will simplify filesystems and
block drivers as they can drop -EOPNOTSUPP retry logic for barriers.
* QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into
blk-flush.c.
* REQ_FLUSH w/o data can also be directly passed to drivers without
sequencing but some drivers assume that zero length requests don't
have rq->bio which isn't true for these requests requiring the use
of proxy requests.
* REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are
copied from bio to request.
* WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and
WRITE_FLUSH_FUA are added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.
Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers. Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.
In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Minchan Kim