The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
Development updates for v6.5-rc1
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
-----BEGIN PGP SIGNATURE-----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=/AbD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
The unit address needs to be changed to match the reg property:
arch/arm/boot/dts/marvell/armada-390-db.dts:84.10-106.4: Warning (spi_bus_reg): /soc/spi@10680/flash@1: SPI bus unit address format error, expected "0"
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
-----BEGIN PGP SIGNATURE-----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=Jjgv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=h4ch
-----END PGP SIGNATURE-----
Merge tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into soc/dt
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
* tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
Link: https://lore.kernel.org/r/20230621185025.GA3197738-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Comparing .dts files to built .dtb files yielded a few .dts files which
are never built. Add them to the build.
Signed-off-by: Rob Herring <robh@kernel.org>
In preparation to move .dts files into subdirectories, include
sunxi-h3-h5-emlid-neutis.dtsi from the current directory rather than the
symlinked include path.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
With interrupt handling fixed in the MaxLinear PHY driver, see commit
97a89ed101 ("net: phy: mxl-gpy: disable interrupts on GPY215 by
default"), we can finally add the correct interrupt description to the
device tree.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org
The pinctrl node was missing which change the pin mux to GPIO mode.
Add it so we don't have to rely on the bootloader to set the correct
mode.
Fixes: 79d83b3a45 ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-2-50dd0452b8fe@kernel.org
The pinctrl node was missing which change the pin mux to GPIO mode. Add
it.
Fixes: 79d83b3a45 ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support")
Signed-off-by: Michael Walle <mwalle@kernel.org>
[claudiu.beznea: moved pinctrl-* bindings after compatible]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-1-50dd0452b8fe@kernel.org
for 6.5, please pull the following:
- Krzysztof adds missing cache properties for the BCM63xx DSL routers
- Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license,
and he fixes a number of Device Tree nodes warnings, adds MAC address
for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory
information to the DTS
- Stanislav updates the "BCM mobile" SoCs DTS files to fix various
warnings
- Aurelien enables the BCM283x DTS files to be built with relocation
information to make them usable with DT overlays
- Christian fixes the Meraki DTS to have correct NAND ECC properties,
correct partition numbers and fixed-link node(s) properties
-----BEGIN PGP SIGNATURE-----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=t3sW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AA1g
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.5, please pull the following:
- Krzysztof adds missing cache properties for the BCM63xx DSL routers
- Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license,
and he fixes a number of Device Tree nodes warnings, adds MAC address
for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory
information to the DTS
- Stanislav updates the "BCM mobile" SoCs DTS files to fix various
warnings
- Aurelien enables the BCM283x DTS files to be built with relocation
information to make them usable with DT overlays
- Christian fixes the Meraki DTS to have correct NAND ECC properties,
correct partition numbers and fixed-link node(s) properties
* tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits)
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings
dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties
dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding
ARM: dts: BCM5301X: fix duplex-full => full-duplex
ARM: dts: BCM5301X: MR32: remove partition index numbers
ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property
dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML
ARM: dts: bcm21664-garnet: use node labels
ARM: dts: bcm11351/21664: add UART, I2C node labels
ARM: dts: bcm-mobile: move status properties to the end of nodes
ARM: dts: bcm21664/23550: use CCU compatibles directly
ARM: dts: bcm-mobile: change "" includes to <> where applicable
ARM: dts: BCM5301X: Describe switch ports in the main DTS
ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys
ARM: dts: BCM5301X: Drop invalid #usb-cells
dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2)
ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties
...
Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On MSM8960, support for USB is added and the Samsung Galaxy Express is
added.
GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.
On MSM8226, QFPROM, tsens and thermal zones are defined, and the
description of the clock hierarchy is improved.
The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
defined.
Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
changes in the LP855X DeviceTree binding.
-----BEGIN PGP SIGNATURE-----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=UOBe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=//4G
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM32 DeviceTree updates for v6.5
On MSM8960, support for USB is added and the Samsung Galaxy Express is
added.
GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.
On MSM8226, QFPROM, tsens and thermal zones are defined, and the
description of the clock hierarchy is improved.
The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
defined.
Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
changes in the LP855X DeviceTree binding.
* tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm: dts: qcom: sdx55: Add interconnect path
ARM: dts: qcom: msm8226: Add thermal zones node
ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells
ARM: dts: qcom: msm8226: Add qfprom node
ARM: dts: qcom: pm8941: Add thermal zone config
ARM: dts: qcom: pm8841: Add thermal zone config
ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config
ARM: dts: qcom: msm8974: rename labels for DSI nodes
ARM: dts: qcom: apq8074-dragonboard: add gpio keys
ARM: dts: qcom: apq8074-dragonboard: add onboard leds
ARM: dts: qcom: Add Samsung Galaxy Express support
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: adapt to LP855X bindings changes
ARM: dts: qcom: msm8226: Provide clocks to mmcc node
ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
NAND support on IPQ4019 boards is restored, after a faulty node rename.
On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
gains vibrator support.
On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
modem DSPs are enabled.
On SDX65 PCIe controller and PHY are introduced, to provide endpoint
functionality. This is enabled on the related MTP.
A range of DeviceTree cleanups are also included.
-----BEGIN PGP SIGNATURE-----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=Vt5J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSD/QACgkQYKtH/8kJ
UifuzQ//YX5LV20JXkDZ+8anKjfKPOlmff1My0vxcpweC9RWscIQN9h6AJKUUjVB
kuDHLxhhpd7+nqiBDK4ChtHJXB3GdSvUGGK6HB5EAvfy4iEL3+1MZ3lOFOan6GxM
USaxAJngJvWg61QwInmwH0yyylnLxXAxdBrP9sL3TNg+2pO6/9KOJkOKqc7lSh5B
SbyR64VOTB1D3oDKSq+7xT3hXC9xI4AJBt0ITgI70NsZDVvtQGnK6Gu7wJpIlRw7
G1tovt8T84QCMfJoDQlRbaqIjZ72kBUH+yAkn2/8M9KMJiAV8x5bQTns7MLoVmYF
b9FNNx5llknBjYRlE2ZjdWx2XbRuJtY9JJJPObdXl7iHTqFEJ/4WWXJPBcJntNwc
UdvtuRE4Xi+5ITLPQPLoOYrJIttUmnVG9y0yaPUnra21PDHUIW6K1VCpaQ9GqZbz
Iy67t/SP7hO+tEntQAWXXYNW8ZqMh58rOFULftS9MIo8u2X7T1xQB930fAFhZcs5
yVGf+Sb/nZ+MSD99aVkjnOyDv/abMKmxj/87rm7pMSd7URJY4tTmd4dfMAF1/scI
1attHgASUukxqMYV13s59a2d6epTQhKvEFs7R/D+twV2ZFJT3A0XrFcd90sph1oy
jTzH+U4Au0YxazYcQp1WKpGWMUzoUW//TazDdWwnBBfJ2AR1dj4=
=mPrb
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.5
NAND support on IPQ4019 boards is restored, after a faulty node rename.
On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
gains vibrator support.
On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
modem DSPs are enabled.
On SDX65 PCIe controller and PHY are introduced, to provide endpoint
functionality. This is enabled on the related MTP.
A range of DeviceTree cleanups are also included.
* tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
ARM: dts: qcom: msm8226: Add IMEM node
ARM: dts: qcom: msm8226: Add rpm-stats device node
ARM: dts: qcom: msm8226: Add PMU node
ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
ARM: dts: qcom: sdx65: Add support for PCIe EP
ARM: dts: qcom: sdx65: Add support for PCIe PHY
ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings
ARM: dts: qcom: apq8084: correct thermal sensor unit-address
ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
ARM: dts: qcom: ipq8064: align USB node names with bindings
ARM: dts: qcom: ipq8064: correct LED node names
ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
ARM: dts: qcom: msm8974: correct pronto unit-address
...
Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
on the USB subsystem configuration, thermal zones, and the naming of
GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
boards.
- Small random updates and clean-ups on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEHHAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4uBQf+K+vrTJNgrc6S/B4pRvU+JMCc8ncU
abW36M3e7ESvcIlzojJpPO/Xap0aiHaD6rsjNKvWmT8Bwp37s+gMTcGLvciEsUqR
eT+e0ehWxKYCv3xTtjWtg2PB3cvGfDKMmMLrG8QW/eOIPHgH20z+Uw6zTDA1ssjx
IUcDVkvpjE/OxzIfYreIMRvrCHkconrwoC+cxCzQ/7UlgKwWFoqmCmwRgORbvHR3
nK/RTYsP1JYewBM83pywMACK2GOu/YOs6d8ey7RBrnrXOzIeDW4qtPySkuberH8U
VAyalU1XE1bbxiaAmhe4oqx5RBAtFhu2Rt8Ob+hiCTebeXtwO5JWRv7Pww==
=VEXO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Sg9p
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.5:
- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
on the USB subsystem configuration, thermal zones, and the naming of
GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
boards.
- Small random updates and clean-ups on various boards.
* tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
ARM: dts: imx6qdl: vicut1: rename power to power-button
ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port
ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port
ARM: dts: imx6dl: prtmvt: fix different USB related warnings
ARM: dts: imx6dl: alti6p: fix different USB related warnings
ARM: dts: imx6dl: vicut1: Address USB related warnings
ARM: dts: imx6dl: Add trip points to thermal zones on several devices
ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node
ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
ARM: dts: imx: Use 'eeprom' as node name
ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name
ARM: dts: imx: Use 'pmic' as node name
ARM: dts: imx6: Use the mux- prefix
ARM: dts: imx7d-sdb: Allow UHS modes
...
Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MCU/MPU:
- Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
- Fix LTDC/DSI warnings.
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
- DH:
- Rearrange MAC EEPROM.
- Rename AV96 sound card.
- Adopt generic IIo bindings.
- Fix audio routing.
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
-----BEGIN PGP SIGNATURE-----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=kf1Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDJoACgkQYKtH/8kJ
Uif9qxAAnrSnL55CNXoWGiGjhyZxw4Vscm1cBYlSHINoH4wdumRteV3Ux74SCsyy
rlny5kIi2g5Le/EXYA0cH4GbEtXUzm+xyrPGUM7M67AStIE3es51OCoOS4JBYw34
jv82s+rzuXUTogruS5EhkZ6NDve2Oo+sPIjdJWKhf/kV90uocrsQt7AwYs9MSs0t
cr46LaTUqXIHYyig8TbW7bNYqZTKn+0xCLo5DSeToru1dhBNraNkATapGglv7P1q
tcVexjf0SpsST8K7AW0R796urxrSCLBw3bFLqGodArs5N76RObcBLWasVqZPEC8q
Uy2JAyiNGWzSPjAznUBnllCndxOd+0wqSKYkffR8jjSpYvcL0aoqi8F+Lqa+C/Dv
I2SHA2JhAwYdKj5Zc9SGFuVcwb7ABNBi4uimjm9rwlYmKHeHzFrIh5pcROpPi3qe
4/8YNjyx5LyvZ7su+GFGhLAi7XmhtJ7j07BuRfMJJcOdw6AxOvzvNxIZvmNN8evV
U9r6/NXJaLw4SmhhlXTTatWnU/oxx8GvXja/tFfReotFuefBjwYYhhsjRcebtaXr
RFEtCjtauVHdQRxsJbeuCZ56l5Sjliqg4EJ5AuOEpXf4s4Z98ZEoO5KPWWTFlwjp
Th2zLU3pbJPqbQcp9lxN+ETBemuYhr97XrNmFpitec7kTjl/hTM=
=kRKO
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.5, round 1
Highlights:
----------
- MCU/MPU:
- Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
- Fix LTDC/DSI warnings.
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
- DH:
- Rearrange MAC EEPROM.
- Rename AV96 sound card.
- Adopt generic IIo bindings.
- Fix audio routing.
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
ARM: dts: stm32: add vrefint calibration on stm32mp15
ARM: dts: stm32: add adc internal channels to stm32mp15
ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
ARM: dts: stm32: fix warnings on stm32f469-disco board
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
ARM: dts: stm32: add STM32MP1-based Phytec board
...
Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
Two properties that need to be added later are "device_type" and
"ranges". Adding "device_type" on its own causes a new warning and the
value of "ranges" needs to be determined yet.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
A number of prototypes are missing for the decompressor, some
of them are in the .c files that contain the callers, but are
invisible at the function definition:
arch/arm/boot/compressed/misc.c:129:17: error: no previous prototype for '__div0' [-Werror=missing-prototypes]
arch/arm/boot/compressed/misc.c:138:1: error: no previous prototype for 'decompress_kernel' [-Werror=missing-prototypes]
arch/arm/boot/compressed/misc.c:163:6: error: no previous prototype for 'fortify_panic' [-Werror=missing-prototypes]
arch/arm/boot/compressed/decompress.c:63:5: error: no previous prototype for 'do_decompress' [-Werror=missing-prototypes]
arch/arm/boot/compressed/fdt_check_mem_start.c:63:10: error: no previous prototype for 'fdt_check_mem_start' [-Werror=missing-prototypes]
Move these all to misc.h so they are visible by the callee as well.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Update the node names for the SPI NOR and NAND partitions to conform to
the partition properties in the relevant dtschema.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Specify pre-parsed per-sensor calibration nvmem cells in the qfprom
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507201225.89694-6-matti.lehtimaki@gmail.com
Add thermal zone for the PMIC thermal sensor. Temperatures are based on
downstream values, except for critical trip point where 140°C is used
instead of 145°C due to limitations without a configured ADC.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230529221501.43455-3-matti.lehtimaki@gmail.com
Add thermal sensor, which is using on chip VADC channel to report PMIC
die temperature. Also add the corresponding thermal zone.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230529221501.43455-2-matti.lehtimaki@gmail.com
Currently in board files MDSS and HDMI nodes stay apart, because labels
for HDMI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.
To keep all display-related nodes close in the board files, change DSI
node aliases from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-15-dmitry.baryshkov@linaro.org
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437.
Currently, the following things work: UART, eMMC, SD Card, and USB.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com
Add the required nodes to support USB on the MSM8960 SoC. As it's very
similar to the APQ8064 SoC, the nodes are almost identical
Add a label to sleep_clk for the USB node to reference
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607050025.86636-4-guptarud@gmail.com
The xo clock being used everywhere actually goes via the RPM. Since the
rpmcc driver recently got support for this clock we can use this now.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz
On the MT7623AI SoC and Bananapi BPI-R2, port 5 of the MT7530 switch is
connected to the second MAC of the SoC as a CPU port. Add the port and set
up the second MAC on the bindings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230210182505.24597-6-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Flow control needs to be enabled on both sides to work.
It is already enabled on gmac0, enable it on port@6 too.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230210182505.24597-5-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.
Any address can be used for the switch, therefore, change the switch
address to 0x1f.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230210182505.24597-4-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT7530 switch is included as a part of the multi-chip module on the
MT7623AI SoC. Add it to mt7623a.dtsi and adjust DTs that call mt7623a.dtsi.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230210182505.24597-3-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There are two gigabit MACs on the MT7623AI and MT7623NI SoCs. Add them to
mt7623.dtsi and adjust the DTs that call mt7623.dtsi.
Now that there are labels for the MACs, remove them from under ð on the
DTs that call mt7623.dtsi. Remove the unnecessary mdio label from Bananapi
BPI-R2.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230210182505.24597-2-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Add IOMMU support for PCIe devices on R-Car Gen3 and RZ/G2 SoCs,
- Add HSCIF1 serial port support on Renesas ULCB boards equipped with
the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZIL2yQAKCRCKwlD9ZEnx
cMjqAP4p6n7kV6iRh7sJPIzinFvIEPn5t+q5D/72PdycUoRFugEArHYwMkrebDBc
saar6dT/71Wa14hIkg3ZXWvj6E/+pwg=
=4Gv2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Gs3L
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.5 (take two)
- Add IOMMU support for PCIe devices on R-Car Gen3 and RZ/G2 SoCs,
- Add HSCIF1 serial port support on Renesas ULCB boards equipped with
the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb-kf: Add HSCIF1 node
arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1
ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier
arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes
Link: https://lore.kernel.org/r/cover.1686304614.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski