percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Turns out that multiple people sent pretty much the same patch
for the same staging drivers. Commit these in two different
branches and merge them together to get a more complete coverage
of the cleanup and properly credit everyone for the work that they
did.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all the errors and the majority of the warnings found with
checkpatch.pl script in hfa384x.h, following Gábor Stefanik hints
Signed-off-by: Alessandro Ghedini <al3xbio@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the prism2usb.c that fixes one line which was over
the 80 character limit by wrapping it to a new line and removes a
commented out configuration for a ZyDAS ZD1201 device since support for
this device with this driver is now deprecated.
Signed-off-by: Jim Dog <jimdog@northern-indymedia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix prism2fw.c printk format warning:
drivers/staging/wlan-ng/prism2fw.c:209: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleanups as suggested by checkpatch.pl utiltiy.
.o's from before and after cleanup have matching SHA1s.
Signed-off-by: Svenne Krap <svenne@krap.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove iw_handle_def private initialisations as they are no longer need
these.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Without WEXT_PRIV set the p80211wext.c fails to build due to unknown fields in
the iw_handler_def struct.
Those fields are enclosed in WEXT_PRIV conditionals in the prototype
of iw_handler_def in include/net/iw_handler.h
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: stable <stable@kernel.org> [2.6.33 only]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ make
...
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_dorequest’:
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwretry’:
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwretry’:
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfrag’:
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfrag’:
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrts’:
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwrts’:
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrate’:
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfreq’:
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfreq’:
drivers/staging/wlan-ng/p80211wext.c:320: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwmode’:
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.status’ may be used uninitialized in this function
...
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The prevailing idiom is to select WIRELESS_EXT not depend on it.
Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A comment misspells "invocation"; this fixes it. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Memset should be given the size of the structure, not the size of the pointer.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T *x;
expression E;
@@
memset(x, E, sizeof(
+ *
x))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the wireless drivers to depend on CONFIG_WLAN instead of
CONFIG_WLAN_80211 which is going away soon.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert prism2_usb firmware loading to load firmware in pre-compiled
binary 'ihex' format rather than ascii 'srec' format. This moves the
srec processing and sorting of records out of kernel space into a
pre-compiler. The driver now just works with the binary image, but
still does the 'pda plugging' of that image at runtime, as required
by the prism hardware.
Some Notes:
- The firmware is now expected to be in the same 'ihex' (.fw) format
used by other drivers.
- The now driver assumes the data records are already sorted into ascending
address order.
- Plug and crc records are still recognised by special address locations
as in original srec processing.
- The srec S7 start address record is assumed to have been converted
into a data record with another special address location (0xff400000),
with the original start address being stored as a 4 byte data word
(little endian).
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
scripts/checkpatch.pl error fixes. This is a TODO item.
This patch fixes most of the errors reported by checkpatch.pl in
wlan-ng directory of staging tree.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts the remaining occurences of raw return values to their
symbolic counterparts in ndo_start_xmit() functions that were missed by the
previous automatic conversion.
Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero
is changed to explicitly use NETDEV_TX_OK.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove Lindent changes as a TODO item in the wlan-ng directory of staging tree.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lindent script cleanups in wlan-ng driver in the staging tree.
This is a item in the TODO list.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The expression !(ext->alg & IW_ENCODE_ALG_WEP) appears to be incorrect,
because there are several possible values for ext->alg that give 1 when
bit-anded with IW_ENCODE_ALG_WEP. Therefore Richard Kennedy suggested to
rewrite the code with !=
Added \n at the end of the debug string as well.
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change uses of KERN_DEBUG over to pr_debug to match original driver
where messages are only needed during driver development.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move prism2 firmware loading from userspace into driver, using linux
request_firmware(). Firmware is now loaded (if available) on device
probing, before it is registered as a netdevice and advertised to userspace.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively.
0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases
where its in direct proximity to one of the other values.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Linux wireless developers don't want to hear anything about the
staging wireless drivers, for a wide range of miopic reasons.
The following patch, based on a patch from Johannes Berg, tries to
document this issue a bit better.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a mutex to block ioctls before the card is fully initialised and
only allow one ioctl at a time.
This stops udev trying to load the firmware before to card is fully up.
patch ported from wlan-ng-devel
Karl Relton <karllinuxtest.relton@ntlworld.com> spotted that this was
missing from the staging version,
http://lists.linux-wlan.com/pipermail/linux-wlan-devel/2009-February/003890.html
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace hfa384x2host_16(), hfa384x2host_32(), host2hfa384x_16()
and host2hfa384x_32() with standard byteorder macros.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tejun Heo