We have (historically) different approaches how we identify the type
of a given fwnode. Let's standardize them across the library code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware
interface when unbinding the device.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In case when the properties are supplied in the secondary fwnode
(for example, built-in device properties) the fwnode pointer left
unassigned. This makes unable to retrieve them.
Assign fwnode to parent's if no primary one provided.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Fixes: 2afa97e9868f ("gpiolib: Read "gpio-line-names" from a firmware node")
Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000,
see arch/arm/boot/dts/stm32mp151.dtsi. The driver for
pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c
and iterates over all of its DT subnodes when registering each GPIO
bank gpiochip. Each gpiochip has:
- gpio_chip.parent = dev,
where dev is the device node of the pin controller
- gpio_chip.of_node = np,
which is the OF node of the GPIO bank
Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node),
i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000.
The original code behaved correctly, as it extracted the "gpio-line-names"
from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000.
To achieve the same behaviour, read property from the firmware node.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Marek Vasut <marex@denx.de>
Reported-by: Roman Guskov <rguskov@dh-electronics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 0ea683931a ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.
Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:
gpio gpiochip3: Persistence not supported for GPIO 1
irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0
->handle_irq(): 41c7b0ab, handle_bad_irq+0x0/0x40
->irq_data.chip(): e03f1e72, 0xc2539218
->action(): 0ecc7e6f
->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10
IRQ_NOPROBE set
unexpected IRQ trap at vector 20
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().
For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.
Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea683931a ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.
Fixes: ff2b135922 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # 4.6
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix a NULL-pointer deference when deregistering the gpio character
device that was introduced by the recent stub-driver hack. When the new
"driver" is unbound as part of deregistration, driver core clears the
driver-data pointer which is used to retrieve the struct gpio_device in
its release callback.
Fix this by using container_of() in the release callback as should have
been done all along.
Fixes: 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Cc: Saravana Kannan <saravanak@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in linux-next
for the past few weeks, when Saravana tried to set fw_devlink=on as the
default functionality. This caused a number of systems to stop booting,
and lots of bugs were fixed in this area for almost all of the reported
systems, but this option is not ready to be turned on just yet for the
default operation based on this testing, so I've reverted that change at
the very end so we don't have to worry about regressions in 5.12. We
will try to turn this on for 5.13 if testing goes better over the next
few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their
remove callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZhzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylS2wCfU28FxDWNwcWhPFVfRT8Mb3OxZ50An1sR4lNR
t5Ie4aztMUjVJhI9bq6g
=3NSB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / debugfs update from Greg KH:
"Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in
linux-next for the past few weeks, when Saravana tried to set
fw_devlink=on as the default functionality. This caused a number of
systems to stop booting, and lots of bugs were fixed in this area for
almost all of the reported systems, but this option is not ready to be
turned on just yet for the default operation based on this testing, so
I've reverted that change at the very end so we don't have to worry
about regressions in 5.12
We will try to turn this on for 5.13 if testing goes better over the
next few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their remove
callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change"
* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Revert "driver core: Set fw_devlink=on by default"
of: property: fw_devlink: Ignore interrupts property for some configs
debugfs: do not attempt to create a new file before the filesystem is initalized
debugfs: be more robust at handling improper input in debugfs_lookup()
driver core: auxiliary bus: Fix calling stage for auxiliary bus init
of: irq: Fix the return value for of_irq_parse_one() stub
of: irq: make a stub for of_irq_parse_one()
clk: Mark fwnodes when their clock provider is added/removed
PM: domains: Mark fwnodes when their powerdomain is added/removed
irqdomain: Mark fwnodes when their irqdomain is added/removed
driver core: fw_devlink: Handle suppliers that don't use driver core
of: property: Add fw_devlink support for optional properties
driver core: Add fw_devlink.strict kernel param
of: property: Don't add links to absent suppliers
driver core: fw_devlink: Detect supplier devices that will never be added
driver core: platform: Emit a warning if a remove callback returned non-zero
of: property: Fix fw_devlink handling of interrupts/interrupts-extended
gpiolib: Don't probe gpio_device if it's not the primary device
device.h: Remove bogus "the" in kerneldoc
gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
...
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to perform
the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that userspace
programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx as well
as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers from
intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all over the
place
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmAzzkgACgkQEacuoBRx
13K9xA//ZjxuUdX+q3tcfcljMrSAYWVK0PwxiHtjMRCcMX5Mkg/VP0Aqig0/CAWv
b/98JNBLX8GxWhy4WlIVgkK2NZTrPAs3c1sYxufb7AgqmhOaqA6d1xZ0oYdhPykc
H5yy55AEhiNMZCwEFWJXZSisWKsZ+Nnz+XZl5wWEsTWcvQgOGveK/+nxk//UW2Kj
ymtO4LnivC7vABd/gBSZshJwjE45/os8QBS2HTKw3bcHa7p9Sd72e0zYthXzIS9J
nECOSBdHMnfcIthFrQWXOXZz72xf3KjpoouztDEKqTOVFUplxQ0BxgwfrjjNd3qJ
sHXtIzb3ZsGXc8yDoSmSE7ahspsP/x/uYfTxDr7dn9m9obSTWwy5vXK9xJaGGk0r
TLnPZTESXqu/Eoek22ll7345RNSFlz8g0bCbO1avdtWYTxg/oaWxr1SEvznEiDZ5
I36K8XGPye1P2dZ3v08cjIUW6QGx9HEZmN3Djzh/pnMvhF72BDy/fipR4fnIJGOc
ptmrHK0BWvU0fyj58TqeOXkafAulrqoKIu5sOTEkVUQlRqVF6E7pp5/KcxJv8xJs
zbcmu/26MYkJYeo/AGpshhTD6EDnKnlab1VHrHgSkA5zKdVghRqqd4EGyRKUyQ5e
WxEpPPG67RUIAZrmqA3eYMWncUhvD1LRTILN8ZLPlES1/9YUlIE=
=OZtR
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
- Standardise MFD_CELL_* helpers
- New Drivers
- Add support for Acer Iconia Tab A500 Embedded Controller
- New Device Support
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
- New Functionality
- Support ACPI enumeration; arizona
- Fix-ups
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
- Bug Fixes
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad
-----BEGIN PGP SIGNATURE-----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=ieAS
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Standardise MFD_CELL_* helpers
New Drivers:
- Add support for Acer Iconia Tab A500 Embedded Controller
New Device Support:
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
New Functionality:
- Support ACPI enumeration; arizona
Fix-ups:
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
Bug Fixes:
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad"
* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
mfd: iqs62x: Do not change clock frequency during ATI
mfd: iqs62x: Do not poll during ATI
mfd: iqs62x: Increase interrupt handler return delay
mfd: iqs62x: Rename regmap_config struct
mfd: iqs62x: Remove unused bit mask
mfd: iqs62x: Remove superfluous whitespace above fallthroughs
mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
mfd: intel-m10-bmc: Expose MAC address and count
mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
mfd: gateworks-gsc: Fix interrupt type
mfd: Standardise MFD_CELL_* helper names
mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
dt-bindings: mfd: Correct the node name of the panel LED
mfd: sgi-ioc3: Turn Kconfig option into a bool
mfd: altera-sysmgr: Fix physical address storing more
...
Pull i2c updates from Wolfram Sang:
- mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
them are all over the place.
- removal of the efm32, sirf, u300, and zte zx bus drivers because of
platform removal. So, we have a pleasant diffstat this time.
- first set of cleanups in the I2C core as preparation to increase
maximum length of SMBus transfers to 255 (as specified in the new
standard). Better documentation of struct i2c_msg and its flags stand
out here.
- the testunit can now respond to SMBus block process calls which is
the testcase when implementing the above new maximum length.
* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
i2c: remove redundant error print in stm32f7_i2c_probe
i2c: testunit: add support for block process calls
i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
dt-bindings: eeprom: at24: Document ROHM BR24G01
i2c: i801: Add support for Intel Alder Lake PCH-P
i2c: mv64xxx: Fix check for missing clock after adding RPM
i2c: mux: mlxcpld: Add callback to notify mux creation completion
i2c: mux: mlxcpld: Extend supported mux number
i2c: mux: mlxcpld: Extend driver to support word address space devices
i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
i2c: mux: mlxcpld: Convert driver to platform driver
i2c: imx: Synthesize end of transaction events without idle interrupts
i2c: i2c-qcom-geni: Add shutdown callback for i2c
i2c: mv64xxx: Add runtime PM support
i2c: amd-mp2: Remove unused macro
i2c: amd-mp2: convert to PCI logging functions
i2c: mux: mlxcpld: Move header file out of x86 realm
platform/x86: mlxcpld: Update module license
i2c: mux: mlxcpld: Update module license
...
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
If no n_latch value will be provided at driver probe then all pins will
be used as an input:
gpio->out = ~n_latch;
In that case initial state for all pins is "one":
gpio->status = gpio->out;
So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;
The right solution will be to read actual state at driver probe.
Cc: stable@vger.kernel.org
Fixes: 6e20a0a429 ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- use predefined constants instead of plain numbers
- use provided bank IRQ number instead of defined constant
for port F
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- replace plain numbers with girq->num_parents in devm_kcalloc
- replace plain numbers with girq->num_parents for port F
- refactor i - 1 to i + 1 to make loop more readable
- combine getting IRQ's loop and setting handler's into single loop
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
As ->to_irq is redefined in gpiochip_add_irqchip, having it defined in
driver is useless, so let's drop it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Port F IRQ's should be statically mapped to EP93XX_GPIO_F_IRQ_BASE.
So we need to specify girq->first otherwise:
"If device tree is used, then first_irq will be 0 and
IRQ's get mapped dynamically on the fly"
And that's not the thing we want.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add check to see if gpio-width property does not exceed 32.
If it exceeds then return -EINVAL.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Adds interrupt support to the Xilinx GPIO driver so that rising and
falling edge line events can be supported. Since interrupt support is
an optional feature in the Xilinx IP, the driver continues to support
devices which have no interrupt provided.
Depends on OF_GPIO framework for of_xlate function to translate
gpiospec to the GPIO number and flags.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Changed spinlock array to single. It is preparation for irq support which
is shared between two channels that's why spinlock should be only one.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Driver is gone, no need to keep a Makefile entry for it. Remove.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are a few places in the code where IRQ status and mask register
values are being updated. Use a new exctracted helper to deduplicate
the code.
While at it, get rid of unnecessary divisions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
the regmap_set_bits(), regmap_clear_bits() API makes code better to understand.
Switch the driver to use them,
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The casting from int to long on 64-bit platform is error prone.
Replace it with proper type of the variable on stack.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Instead of doing it in place, convert GPIO_LOOKUP_IDX() and GPIO_HOG()
to be compund literals that's allow to use them as rvalue in assignments.
Due to above conversion, use compound literal from the header
in the gpio-aggregator.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
We already have a nice helper called get_options() which can be used
to validate the input format. Replace isrange() by using it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
If we get bias set request, for example, from GpioIo() resource,
we silently ignore it. Make bias configuration available for GPIOs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use the marvell,pwm-offset DT property to store the location of PWM
signal duration registers.
Since we have more than two GPIO chips per system, we can't use the
alias id to differentiate between them. Use the offset value for that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The irq_set_affinity callback should not be set if parent IRQ domain
doesn't present because gpio-tegra driver callback fails in this case,
causing a noisy error messages on system suspend:
Disabling non-boot CPUs ...
IRQ 26: no longer affine to CPU1
IRQ128: set affinity failed(-22).
IRQ130: set affinity failed(-22).
IRQ131: set affinity failed(-22).
IRQ 27: no longer affine to CPU2
IRQ128: set affinity failed(-22).
IRQ130: set affinity failed(-22).
IRQ131: set affinity failed(-22).
IRQ 28: no longer affine to CPU3
IRQ128: set affinity failed(-22).
IRQ130: set affinity failed(-22).
IRQ131: set affinity failed(-22).
Entering suspend state LP1
Hence just don't specify the irq_set_affinity callback if parent PMC
IRQ domain is missing. Tegra isn't capable of setting affinity per GPIO,
affinity could be set only per GPIO bank, thus there is nothing to do
for gpio-tegra in regards to CPU affinity without the parent IRQ domain.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Dmitry Osipenko <digetx@gmail.com> # A500 T20 and Nexus7 T30
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Reported-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Support building driver as a loadable kernel module. This allows to
reduce size of a kernel zImage, which is important for some devices
since size of kernel partition may be limited and since some bootloader
variants have known problems in regards to the initrd placement if kernel
image is too big.
$ lsmod
Module Size Used by
gpio_tegra 16384 27
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Clean up inconsistent whitespaces and tabs in the definition of
tegra_gpio_driver to make code look better a tad.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Use resource-managed variant of debugfs_create_file(0444) to prepare code
for the modularization of the driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Don't cross 80 chars of line length in order to keep formatting of the
code consistent.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Hardware appears to treat zero value as 2^32. Take advantage of this
fact to support on/off values of up to UINT_MAX+1 == 2^32. Adjust both
.apply and .get_state to handle zero as a special case.
Rounded up division result in .get_state can't be zero, since the
dividend is now larger than 0. Remove check for this case.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Analyzed-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
PWM on/off registers are limited to UINT_MAX. However the state period
and duty_cycle fields are ns values of type u64. There is no reason to
limit them to UINT_MAX.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Round up the divisions in .get_state() to make applying the read out
configuration idempotent in most cases as .apply rounds down.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio-mockup doesn't require SYSFS to be selected so drop that bit from
the Kconfig text.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The GPIO bank wake interrupt setting was erroneously removed after
conversion to gpio_irq_chip, thus the wake interrupt programming is
broken now. Secondly, the wake_enb of the GPIO driver should be changed
only after the successful toggling of the IRQ wake-state. Restore the wake
interrupt setting and the programming order.
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
According to the reference manual "The PCA9505 is identical to the
PCA9506 except that it includes 100 kΩ internal pull-up resistors on all
the I/Os." So the pca9506 device can be considered identical to the
pca9505 for the gpio driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add support for the GPIO controller block in the R-Car V3U (R8A779A0)
SoC, which is very similar to the block found on other R-Car Gen3 SoCs.
However, this block has a new General Input Enable Register (INEN),
whose reset state is to have all inputs disabled.
Enable input for all available pins in probe and resume, to support the
use of the General Input Register (INDT) for reading pin state at all
times. This preserves backwards compatibility with other R-Car Gen3
SoCs, as recommended by the Hardware Manual.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently, the R-Car GPIO driver treats R-Car Gen2 and R-Car Gen3 GPIO
controllers the same. However, there exist small differences, like the
behavior of the General Input Register (INDT):
- On R-Car Gen1, R-Car Gen2, and RZ/G1, INDT only reflects the state
of an input pin if the GPIO is configured for input,
- On R-Car Gen3 and RZ/G2, INDT always reflects the state of the input
pins.
Hence to accommodate all variants, the driver does not use the INDT
register to read the status of a GPIO line when configured for output,
at the expense of doing 2 or 3 register reads instead of 1.
Given register accesses are slow, change the .get() and .get_multiple()
callbacks to always use INDT to read pin state on SoCs where this is
supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Using a helper local variable to store the address of &pdev->dev adds
to readability and allows us to avoid unnecessary line breaks.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Convert the Tegra GPIO driver to use the gpio_irq_chip infrastructure.
This allows a bit of boiler plate to be removed and while at it enables
support for hierarchical domains, which is useful to support PMC wake
events on Tegra210 and earlier.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The ROHM BD70528 and BD71828 GPIO drivers only need the regmap
pointer from parent. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been
already added to all the respective R-Car Gen{1,2,3} SoC DTSI files,
remove the redundant device specific values from the driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixes the following warnings which results in interrupts disabled on
port B/F:
gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.
- added separate irqchip for each interrupt capable gpiochip
- provided unique names for each irqchip
Fixes: d2b0919615 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Two index spaces and ep93xx_gpio_port are confusing.
Instead add a separate struct to store necessary data and remove
ep93xx_gpio_port.
- add struct to store IRQ related data for each IRQ capable chip
- replace offset array with defined offsets
- add IRQ registers offset for each IRQ capable chip into
ep93xx_gpio_banks
------------[ cut here ]------------
kernel BUG at drivers/gpio/gpio-ep93xx.c:64!
---[ end trace 3f6544e133e9f5ae ]---
Fixes: fd935fc421 ("gpio: ep93xx: Do not pingpong irq numbers")
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS,
and ask the user in case of compile-testing.
Fixes: 6876ca311b ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Dmitry reported[1] boot error messages caused by
commit 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default").
gpio-1022 (cpu-pwr-req-hog): hogged as input
max77620-pinctrl max77620-pinctrl: pin gpio4 already requested by max77620-pinctrl; cannot claim for gpiochip1
max77620-pinctrl max77620-pinctrl: pin-4 (gpiochip1) status -22
max77620-pinctrl max77620-pinctrl: could not request pin 4 (gpio4) from group gpio4 on device max77620-pinctrl
gpio_stub_drv gpiochip1: Error applying setting, reverse things back
gpio_stub_drv: probe of gpiochip1 failed with error -22
This happens because when we try to probe a device, driver core calls
into pinctrl to set up the pins. However, if the GPIO DT node already
has a proper device created and probed, trying to probe the gpio_device
with a stub driver makes the pins be claimed twice. pinctrl doesn't like
this and throws an error.
So, this patch makes sure the gpio_stub_drv doesn't match with a
gpio_device if it's not the primary device for the fwnode.
[1] - https://lore.kernel.org/lkml/544ad0e4-0954-274c-8e77-866aaa5661a8@gmail.com/
Fixes: 4731210c09 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210205020730.1746354-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After refactoring, we had two variables for the same thing. Remove the
second declaration, one is enough here. Found by cppcheck.
drivers/gpio/gpiolib.c:2551:17: warning: Local variable 'ret' shadows outer variable [shadowVariable]
Fixes: d377f56f34 ("gpio: gpiolib: Normalize return code variable name")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There are multiple instances of GPIO device tree nodes of the form:
foo {
compatible = "acme,foo";
...
gpio0: gpio0@xxxxxxxx {
compatible = "acme,bar";
...
gpio-controller;
};
gpio1: gpio1@xxxxxxxx {
compatible = "acme,bar";
...
gpio-controller;
};
...
}
bazz {
my-gpios = <&gpio0 ...>;
}
Case 1: The driver for "foo" populates struct device for these gpio*
nodes and then probes them using a driver that binds with "acme,bar".
This driver for "acme,bar" then registers the gpio* nodes with gpiolib.
This lines up with how DT nodes with the "compatible" property are
typically converted to struct devices and then registered with driver
core to probe them. This also allows the gpio* devices to hook into all
the driver core capabilities like runtime PM, probe deferral,
suspend/resume ordering, device links, etc.
Case 2: The driver for "foo" doesn't populate struct devices for these
gpio* nodes before registering them with gpiolib. Instead it just loops
through its child nodes and directly registers the gpio* nodes with
gpiolib.
Drivers that follow case 2 cause problems with fw_devlink=on. This is
because fw_devlink will prevent bazz from probing until there's a struct
device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO
supplier). Once the struct device is available, fw_devlink will create a
device link with gpio0 device as the supplier and bazz device as the
consumer. After this point, since the gpio0 device will never bind to a
driver, the device link will prevent bazz device from ever probing.
Finding and refactoring all the instances of drivers that follow case 2
will cause a lot of code churn and it is not something that can be done
in one shot. In some instances it might not even be possible to refactor
them cleanly. Examples of such instances are [1] [2].
This patch works around this problem and avoids all the code churn by
simply setting the fwnode of the gpio_device and creating a stub driver
to bind to the gpio_device. This allows all the consumers to continue
probing when the driver follows case 2.
[1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/
[2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When set_config changes a line from input to output debounce is
implicitly disabled, as debounce makes no sense for outputs, but the
debounce period is not being cleared and is still reported in the
line info.
So clear the debounce period when the debouncer is stopped in
edge_detector_stop().
Fixes: 65cff70464 ("gpiolib: cdev: support setting debounce")
Cc: stable@vger.kernel.org
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the
Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made
the IRQ domain hierarchical, so the driver needs to pull in the support
infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig
options.
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This is the only driver in the kernel source tree that depends on
IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a
visible Kconfig symbol, depending on it (expecting a user to
set/enable it) doesn't make much sense, so change it to select
instead of "depends on".
Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Cc: Thierry Reding <treding@nvidia.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The period is the sum of on and off values. That is, calculate period as
($on + $off) / clkrate
instead of
$off / clkrate - $on / clkrate
that makes no sense.
Reported-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 757642f9a5 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpiochip->to_irq method is redefined in gpiochip_add_irqchip.
A lot of gpiod driver's still define ->to_irq method, let's give
a gentle warning that they can no longer rely on it, so they can remove
it on ocassion.
Fixes: e0d8972898 ("gpio: Implement tighter IRQ chip integration")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add support for BD9574MWF which is similar chip with BD9571MWV.
Note that BD9574MWF has additional features "RECOV_GPOUT",
"FREQSEL" and "RTC_IN", but supports GPIO function only.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
To simplify this driver, use dev_get_regmap() and
rid of using struct bd9571mwv.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the SPDX license identifier instead of a local description.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The usual pattern for the remove calls, like gpiod_remove_lookup_table(),
is to be NULL-aware, i.o.w. become a no-op whenever parameter is NULL.
Update gpiod_remove_lookup_table() call to follow this pattern.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The kernel test robot reports the following warning in [1]:
drivers/gpio/gpiolib-cdev.c: In function 'gpio_ioctl':
>>drivers/gpio/gpiolib-cdev.c:1437:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Refactor gpio_ioctl() to handle each ioctl in its own helper function
and so reduce the variables stored on the stack to those explicitly
required to service the ioctl at hand.
The lineinfo_get_v1() helper handles both the GPIO_GET_LINEINFO_IOCTL
and GPIO_GET_LINEINFO_WATCH_IOCTL, as per the corresponding v2
implementation - lineinfo_get().
[1] https://lore.kernel.org/lkml/202012270910.VW3qc1ER-lkp@intel.com/
Fixes: aad955842d ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips
now use the template struct gpio_irq_chip and pass that to the core
to be set up alongside the gpio_chip. We can finally get rid of
the old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME
(wall clock) timestamps. We have found solid use cases for
this, so we support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which
is pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device
tree client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for
register access.
-----BEGIN PGP SIGNATURE-----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=nrFU
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
- Add support for Intel's Platform Monitoring Technology (PMT)
- New Device Support
- Add support for PM660/PM660L to QCom SPMI PMIC
- Add support for lots of new devices to Kontron Core
- New Functionality
- Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API
- Fix-ups
- Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
- Remove superfluous code; madera, tps65910
- Use raw APIs (rid abstractions); tps65911-comparator, tps65910
- Whitespace/formatting fix-ups; tps65910
- Device Tree changes/updates; bd71837-pmic, syscon
- Use helpers/APIs (no hand rolling); altera-sysmgr
- Mark of_match tables as __maybe_unused; twl6030-irq
- Fix spelling; si476x-core
- Bug Fixes
- Reset on resume to ensure known state; madera-core
- Correct ordering issues; madera-core, tps65910, kempld-core
- Remove erroneous passing of of_compatible strings; at91-usart
- Fix potential I2C adaptor leak; htc-i2cpld
- Correct errorneous defines; rt5033-private
- Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
- Fix dev_err_probe() handling; stmfx
- Repair interrupt regression; motorola-cpcap
- Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
fsl-imx25-tsadc, max77650,
mt6397-core, rt5033, stmfx,
max77686, sun4i-gpadc,
wm8994-core, axp20x-i2c
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl/ZunYACgkQUa+KL4f8
d2GDQhAAj8ykIJOerbw8wxO/Lt4jCsbrqIX0/fnKfmDTuJ/K18F7Hox6BNEgte7l
SIC45b7O6RCT6w7jMTX+ml2QFKcUf4cR3lHHDerWSITCP05VKqtktmQF3bN+mATZ
QafN9uhV1E6BGPebRFAMllUTee4Il+7iZR+g8lxYl4AVKpSpGoi9J2H2VLHTDGLC
hOq7glkpt02rQYRnIdNj0Jm/IBvnDAhJeTeexw41P9bpbnC6jiXAJsgApNduUazm
TjfZBUGUIOQssWe6wdr4+v3L+OmKfj9STdJCUOAat9CbarQYDHxBHuSOPk8Q5kVY
LQ3WkV1xdUmLldUmmt/eGn1EgIZb5VbfStrXF8Ih2PSitAKlocmtdu67W4SPX06B
baZcgQ11qPfmecF6NEUEB9BEBPiwuEp+9Hfxmv3EjyN++AnD7sytFou4KP6d3uHL
PC4dK5hHPYMSdl2irFJgxyXOVjglULp/ukwYG4cO6rzKbxYKZAkclXk5vdWhBlJd
NnL+OgByRdTO6fimMDlauUAkrI/xgx0YmK0WTzFtSchc0GRkiCR/yME13pYaNktE
drQLNTNm8NXRh3bfN0HNpZxa1wlLY2lF2p3hEFMUloaCulYtXiL3hCIkTQ6iN+c+
1xwYDaj1Gxg37O7KRp3PAJBwDcZsO54FMRZu9FGA5vhanW000sY=
=Qp9q
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers
- Add support for Intel's Platform Monitoring Technology (PMT)
New Device Support:
- Add support for PM660/PM660L to QCom SPMI PMIC
- Add support for lots of new devices to Kontron Core
New Functionality:
- Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API
Fix-ups:
- Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
- Remove superfluous code; madera, tps65910
- Use raw APIs (rid abstractions); tps65911-comparator, tps65910
- Whitespace/formatting fix-ups; tps65910
- Device Tree changes/updates; bd71837-pmic, syscon
- Use helpers/APIs (no hand rolling); altera-sysmgr
- Mark of_match tables as __maybe_unused; twl6030-irq
- Fix spelling; si476x-core
Bug Fixes:
- Reset on resume to ensure known state; madera-core
- Correct ordering issues; madera-core, tps65910, kempld-core
- Remove erroneous passing of of_compatible strings; at91-usart
- Fix potential I2C adaptor leak; htc-i2cpld
- Correct errorneous defines; rt5033-private
- Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
- Fix dev_err_probe() handling; stmfx
- Repair interrupt regression; motorola-cpcap
- Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
fsl-imx25-tsadc, max77650, mt6397-core, rt5033, stmfx, max77686,
sun4i-gpadc, wm8994-core, axp20x-i2c"
[ The PMT updates already came in through the x86 platform tree ]
* tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
mfd: kempld-core: Add support for additional devices
mfd: si476x-core.h: Fix "regulator" spelling in comment
mfd: twl6030: Mark of_device_id table as maybe unused
mfd: axp20x: Skip of_device_id table when !CONFIG_OF
mfd: wm8994: Drop of_match_ptr from of_device_id table
mfd: sun4i: Drop of_match_ptr from of_device_id table
mfd: max77686: Drop of_match_ptr from of_device_id table
mfd: stmfx: Drop of_match_ptr from of_device_id table
mfd: rt5033: Drop of_match_ptr from of_device_id table
mfd: mt6397: Drop of_match_ptr from of_device_id table
mfd: max77650: Drop of_match_ptr from of_device_id table
mfd: fsl-imx25: Drop of_match_ptr from of_device_id table
mfd: ene-kb3930: Drop of_match_ptr from of_device_id table
mfd: da9150: Drop of_match_ptr from of_device_id table
mfd: da9063: Drop of_match_ptr from of_device_id table
mfd: da9062: Drop of_match_ptr from of_device_id table
mfd: da9055: Drop of_match_ptr from of_device_id table
mfd: bcm590xx: Drop of_match_ptr from of_device_id table
mfd: omap-usb: Depend on COMMON_CLK to fix compile tests
mfd: kempld-core: Check for DMI definition before ACPI
...
Make it clear that ACPI needs to be present only to get driver functional.
It is not required for compilation.
Fixes: 356b01a986 ("gpio: gpio-hisi: Add HiSilicon GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201214165524.43843-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO driver is for HiSilicon's ARM SoC.
HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.
ACPI table example for this GPIO controller:
Device (GPO0)
{
Name (_HID, "HISI0184")
Device (PRTA)
{
Name (_ADR, Zero)
Name (_UID, Zero)
Name (_DSD, Package (0x01)
{
Package (0x02)
{
"ngpios",
0x20
}
})
}
}
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
irqchip shared with multiple gpiochips, leads to recursive call of
gpiochip_irq_mask/gpiochip_irq_unmask which was assigned to
rqchip->irq_mask/irqchip->irq_unmask, these happens becouse of
only irqchip->irq_enable == gpiochip_irq_enable is checked.
Let's add an additional check to make sure shared irqchip is detected
even if irqchip->irq_enable wasn't defined.
Fixes: a8173820f4 ("gpio: gpiolib: Allow GPIO IRQs to lazy disable")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://lore.kernel.org/r/20201210070514.13238-1-nikita.shubin@maquefel.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
-----BEGIN PGP SIGNATURE-----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=RmnM
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
When reporting the state of a GPIO to userspace, we never check
for the actual validity of the line, meaning we report invalid
lines as being usable. A subsequent request will fail though,
which is an inconsistent behaviour from a userspace perspective.
Instead, let's check for the validity of the line and report it
as used if it is invalid. This allows a tool such as gpioinfo
to report something sensible:
gpiochip3 - 4 lines:
line 0: unnamed unused input active-high
line 1: unnamed kernel input active-high [used]
line 2: unnamed kernel input active-high [used]
line 3: unnamed unused input active-high
In this example, lines 1 and 2 are invalid, and cannot be used by
userspace.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201204164739.781812-2-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
EIC controller have unfixed numbers of banks on different Spreadtrum SoCs,
and each bank has its own base address, the loop of getting there base
address in driver should break if the resource gotten via
platform_get_resource() is NULL already. The later ones would be all NULL
even if the loop continues.
Fixes: 25518e024e ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since we already have a few virtual GPIO drivers, and more to come,
this category deserves its own submenu.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
For logging in device contexts, dev_*() functions are preferred over
raw printk(), which also print out device name.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201203182423.5499-2-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For logging in device contexts, dev_*() functions are preferred over
raw printk(), which also print out device name.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201203182423.5499-1-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The idea to create a debugfs to replace the aging and
dangerous sysfs ABI for hacking and tinkering came up
on the list.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201204083533.65830-1-linus.walleij@linaro.org
When trying to export an nonexisting gpio ID, the kernel prints out a
big warning w/ stacktrace, sounding like a huge problem. In fact it's
a pretty normal situation, like file or device not found.
So, just print a more relaxed warning instead.
changes v2: drop defining pr_fmt()
Signed-off-by: Enrico Weigelt <info@metux.net>
Link: https://lore.kernel.org/r/20201202133754.32045-1-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Using CLOCK_REALTIME as the source for event timestamps is crucial for
some specific applications, particularly those requiring timetamps
relative to a PTP clock, so provide an option to switch the event
timestamp source from the default CLOCK_MONOTONIC to CLOCK_REALTIME.
Note that CLOCK_REALTIME was the default source clock for GPIO until
Linux 5.7 when it was changed to CLOCK_MONOTONIC due to issues with the
shifting of the realtime clock.
Providing this option maintains the CLOCK_MONOTONIC as the default,
while also providing a path forward for those dependent on the pre-5.7
behaviour.
Suggested-by: Jack Winch <sunt.un.morcov@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20201014231158.34117-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.
The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.
The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips
The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.
So far this only supports the MSC313 and MSC313E chips.
Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mxs is a devicetree-only platform and hence it does not make use
of the id_table mechanism.
Get rid of the .id_table as it is unused.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201118191938.32693-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This assigns the .irq_set_affinity to the parent callback.
I assume the Tegra186 is an SMP system so this would be
beneficial.
I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patch.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20201117213351.249668-2-linus.walleij@linaro.org
This assigns the .irq_set_affinity to the parent callback.
I assume the sifive GPIO can be used in systems with
SMP.
I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patches.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Yash Shah <yash.shah@sifive.com>
Cc: Wesley W. Terpstra <wesley@sifive.com>
Link: https://lore.kernel.org/r/20201117213351.249668-1-linus.walleij@linaro.org
If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.
If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.
Also only show this obsolete option to expert users.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
Commit 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
changed most readl/writel registers access calls to the regmap API in
preparation for Armada 7K/8K support. PWM duration registers were left using
readl/writel, as the driver does not support PWM for Armada 7K/8K.
Switch PWM duration registers to regmap as first step in adding Armada 7K/8K
PWM functionality support.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.
A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new funtion.
[0] dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Fixes: c2df3de0d0 ("gpio: zynq: properly support runtime PM for GPIO used as interrupts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
A similar check was added in gpiochip_generic_request, but not in free.
This has caused an imbalance count of request vs. free calls to the
pinctrl driver. This patch is targeted to fix that issue.
Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Edmond Chung <edmondchung@google.com>
Signed-off-by: Andrew Chant <achant@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced.
Fixes:27a49ed17e224(gpio: arizona: Add support for GPIOs that)
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The gpiochip may have dependencies from pinmux and so got deferred. Now it
will print error message every time -EPROBE_DEFER is returned which is
unnecessary:
"gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517"
Hence, do suppress error message for -EPROBE_DEFER case.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by explicitly adding a fallthrough pseudo-keyword to indicate
that the code is intended to fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The gpiochip_add_data() may return -EPROBE_DEFER which is not handled
properly by TI GPIO driver and causes unnecessary boot log messages.
Hence, add proper deferred probe handling with new dev_err_probe() API.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is no matching spi_get_drvdata() call in the driver, so there is no
need to do spi_set_drvdata(). This looks like it probably was copied from a
driver that used both spi_set_drvdata() & spi_get_drvdata().
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In dwapb_get_reset(), if devm_reset_control_get_optional_shared() fails,
an error message is printed even if the failure is the benign
EPROBE_DEFER error due to the reset controller not yet being
initialized. Use dev_err_probe() to handle
devm_reset_control_get_optional_shared() errors to avoid unnecessarilly
printing an error message for the deferred probe error.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We can simplify the error path in probe() and drop remove() entirely if
we provide a devm action for freeing the device ID.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We can simplify the code in gpio-exar by using regmap. This allows us to
drop the mutex (regmap provides its own locking) and we can also reuse
regmap's bit operations instead of implementing our own update function.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Provide and use helpers for calculating the register address and bit
offset instead of hand coding it in every function.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's more elegant to use a helper local variable to store the address
of the underlying struct device than to dereference pdev everywhere. It
also has the benefit of avoiding unnecessary line breaks.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.
ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This driver uses IDA APIs but doesn't include the relevant header. This
fixes it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's customary to have a newline between the copyright header and the
includes. Add one to gpio-exar.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use regmap accessors directly for register manipulation - removing one
layer of abstraction.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
We can get hwirq number of the gpio by its irq_data->hwirq so that we don't
need to add more macros for different platforms. This patch is tested in
SiFive Unleashed board and SiFive Unmatched board.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In two different instances the return value of "of_property_read_u32"
API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any error.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Addresses-Coverity: "check_return"
Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We may use BIT() macro to increase readability in
acpi_gpio_adr_space_handler().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
As specified by ACPI the pin index is 16-bit unsigned integer.
Define the variable, which holds it, accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It appears that we are using similar code excerpts for ACPI OpRegion
and event handling. Deduplicate those excerpts by extracting a new
acpi_request_own_gpiod() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
GpioInt() implies input configuration of the pin. Add this to
the acpi_gpio_to_gpiod_flags() and make usable for GpioInt().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
GpioIo() resources don't contain an initial value for the output pin.
Therefore instead of deducting its value solely based on bias field
we should deduce that value from the polarity and the bias fields.
Typical scenario is, when pin is defined in the table and its polarity,
specified in _DSD or via platform code, is defined as active low,
in the following call chain:
-> acpi_populate_gpio_lookup()
-> acpi_gpio_to_gpiod_flags()
it will return GPIOD_OUT_HIGH if bias is set no matter if polarity
is GPIO_ACTIVE_LOW, so it will return the current level instead of
the logical level.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mika noticed that some code is run under mutex when it doesn't require
the lock, like an error code assignment.
Move non-critical code outside of critical section.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We didn't take into account the debounce settings supplied by ACPI.
This change is targeting the mentioned gap.
Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use named item instead of plain integer for enum gpiod_flags
to make it clear that even 0 has its own meaning.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases the GpioInt() resource is coming with bias settings
which may affect system functioning. Respect bias settings for
GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API
in acpi_dev_gpio_irq_get().
Reported-by: Jamie McClymont <jamie@kwiius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases we would like to have debounce setter which doesn't fail
when a feature is not supported by a controller.
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This function is useful for internal use in the GPIO library.
There will be new user coming, prepare a helper for the new comer
and the existing ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Move bias related code from gpio_set_config() to gpio_set_bias().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In the future we will need to have a separate function
that takes an arbitrary argument value.
Extract gpio_set_config_with_argument() for that purpose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Instead of open coded macro use, call pinconf_to_config_packed().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It's no difference in the functionality, but after the change the code
is less error prone to various checkers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Andy Shevchenko