In some cases, bootloaders will leave boot_params->cc_blob_address
uninitialized rather than zeroing it out. This field is only meant to be
set by the boot/compressed kernel in order to pass information to the
uncompressed kernel when SEV-SNP support is enabled.
Therefore, there are no cases where the bootloader-provided values
should be treated as anything other than garbage. Otherwise, the
uncompressed kernel may attempt to access this bogus address, leading to
a crash during early boot.
Normally, sanitize_boot_params() would be used to clear out such fields
but that happens too late: sev_enable() may have already initialized
it to a valid value that should not be zeroed out. Instead, have
sev_enable() zero it out unconditionally beforehand.
Also ensure this happens for !CONFIG_AMD_MEM_ENCRYPT as well by also
including this handling in the sev_enable() stub function.
[ bp: Massage commit message and comments. ]
Fixes: b190a043c4 ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: watnuss@gmx.de
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216387
Link: https://lore.kernel.org/r/20220823160734.89036-1-michael.roth@amd.com
Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:
ld: warning: arch/x86/boot/pmjump.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/x86/boot/compressed/vmlinux has a LOAD segment with RWX permissions
Generally, we would like to avoid the stack being executable. Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack. Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.
LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO. --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.
While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.
Link: https://lore.kernel.org/linux-block/3af4127a-f453-4cf7-f133-a181cce06f73@kernel.dk/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Link: https://github.com/llvm/llvm-project/issues/57009
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The decompressed kernel initially relies on the identity map set up by
the boot/compressed kernel for accessing things like boot_params. With
the recent introduction of SEV-SNP support, the decompressed kernel
also needs to access the setup_data entries pointed to by
boot_params->hdr.setup_data.
This can lead to a crash in the kexec kernel during early boot due to
these entries not currently being included in the initial identity map,
see thread at Link below.
Include mappings for the setup_data entries in the initial identity map.
[ bp: Massage commit message and use a helper var for better readability. ]
Fixes: b190a043c4 ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables.
-----BEGIN PGP SIGNATURE-----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=7wiT
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull more EFI updates from Ard Biesheuvel:
"Follow-up tweaks for EFI changes - they mostly address issues
introduced this merge window, except for Heinrich's patch:
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables"
* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: clean up Kconfig dependencies on CONFIG_EFI
efi/x86: libstub: Make DXE calls mixed mode safe
efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
riscv: read-only pages should not be writable
Commit 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE
header") intends to set the compatibility flag, i.e.,
IMAGE_DLL_CHARACTERISTICS_NX_COMPAT, but this ifdef is actually dead as
the CONFIG_DXE_MEM_ATTRIBUTES Kconfig option does not exist.
The config is actually called EFI_DXE_MEM_ATTRIBUTES. Adjust the ifdef
to use the intended config name.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes: 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE header")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220601115043.7678-1-lukas.bulwahn@gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----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=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
config debug options when trying to debug an issue
- A gcc12 build warnings fix
-----BEGIN PGP SIGNATURE-----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=oO1t
-----END PGP SIGNATURE-----
Merge tag 'x86_build_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Add a "make x86_debug.config" target which enables a bunch of useful
config debug options when trying to debug an issue
- A gcc-12 build warnings fix
* tag 'x86_build_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Wrap literal addresses in absolute_pointer()
x86/configs: Add x86 debugging Kconfig fragment plus docs
This is the Intel version of a confidential computing solution called
Trust Domain Extensions (TDX). This series adds support to run the
kernel as part of a TDX guest. It provides similar guest protections to
AMD's SEV-SNP like guest memory and register state encryption, memory
integrity protection and a lot more.
Design-wise, it differs from AMD's solution considerably: it uses
a software module which runs in a special CPU mode called (Secure
Arbitration Mode) SEAM. As the name suggests, this module serves as sort
of an arbiter which the confidential guest calls for services it needs
during its lifetime.
Just like AMD's SNP set, this series reworks and streamlines certain
parts of x86 arch code so that this feature can be properly accomodated.
-----BEGIN PGP SIGNATURE-----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=ac9K
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel TDX support from Borislav Petkov:
"Intel Trust Domain Extensions (TDX) support.
This is the Intel version of a confidential computing solution called
Trust Domain Extensions (TDX). This series adds support to run the
kernel as part of a TDX guest. It provides similar guest protections
to AMD's SEV-SNP like guest memory and register state encryption,
memory integrity protection and a lot more.
Design-wise, it differs from AMD's solution considerably: it uses a
software module which runs in a special CPU mode called (Secure
Arbitration Mode) SEAM. As the name suggests, this module serves as
sort of an arbiter which the confidential guest calls for services it
needs during its lifetime.
Just like AMD's SNP set, this series reworks and streamlines certain
parts of x86 arch code so that this feature can be properly
accomodated"
* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/tdx: Fix RETs in TDX asm
x86/tdx: Annotate a noreturn function
x86/mm: Fix spacing within memory encryption features message
x86/kaslr: Fix build warning in KASLR code in boot stub
Documentation/x86: Document TDX kernel architecture
ACPICA: Avoid cache flush inside virtual machines
x86/tdx/ioapic: Add shared bit for IOAPIC base address
x86/mm: Make DMA memory shared for TD guest
x86/mm/cpa: Add support for TDX shared memory
x86/tdx: Make pages shared in ioremap()
x86/topology: Disable CPU online/offline control for TDX guests
x86/boot: Avoid #VE during boot for TDX platforms
x86/boot: Set CR0.NE early and keep it set during the boot
x86/acpi/x86/boot: Add multiprocessor wake-up support
x86/boot: Add a trampoline for booting APs via firmware handoff
x86/tdx: Wire up KVM hypercalls
x86/tdx: Port I/O: Add early boot support
x86/tdx: Port I/O: Add runtime hypercalls
x86/boot: Port I/O: Add decompression-time support for TDX
x86/boot: Port I/O: Allow to hook up alternative helpers
...
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a SNP
guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on.
-----BEGIN PGP SIGNATURE-----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=Y8kW
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov:
"The third AMD confidential computing feature called Secure Nested
Paging.
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a
SNP guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on"
* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/entry: Fixup objtool/ibt validation
x86/sev: Mark the code returning to user space as syscall gap
x86/sev: Annotate stack change in the #VC handler
x86/sev: Remove duplicated assignment to variable info
x86/sev: Fix address space sparse warning
x86/sev: Get the AP jump table address from secrets page
x86/sev: Add missing __init annotations to SEV init routines
virt: sevguest: Rename the sevguest dir and files to sev-guest
virt: sevguest: Change driver name to reflect generic SEV support
x86/boot: Put globals that are accessed early into the .data section
x86/boot: Add an efi.h header for the decompressor
virt: sevguest: Fix bool function returning negative value
virt: sevguest: Fix return value check in alloc_shared_pages()
x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
virt: sevguest: Add support to get extended report
virt: sevguest: Add support to derive key
virt: Add SEV-SNP guest driver
x86/sev: Register SEV-SNP guest request platform device
x86/sev: Provide support for SNP guest request NAEs
...
GCC 11 (incorrectly[1]) assumes that literal values cast to (void *)
should be treated like a NULL pointer with an offset, and raises
diagnostics when doing bounds checking under -Warray-bounds. GCC 12
got "smarter" about finding these:
In function 'rdfs8',
inlined from 'vga_recalc_vertical' at /srv/code/arch/x86/boot/video-mode.c:124:29,
inlined from 'set_mode' at /srv/code/arch/x86/boot/video-mode.c:163:3:
/srv/code/arch/x86/boot/boot.h:114:9: warning: array subscript 0 is outside array bounds of 'u8[0]' {aka 'unsigned char[]'} [-Warray-bounds]
114 | asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr));
| ^~~
This has been solved in other places[2] already by using the recently
added absolute_pointer() macro. Do the same here.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://lore.kernel.org/all/20210912160149.2227137-1-linux@roeck-us.net/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220227195918.705219-1-keescook@chromium.org
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Following Baskov Evgeniy's "Handle UEFI NX-restricted page tables"
patches, it's safe to set this compatibility flag to let loaders know
they don't need to make special accommodations for kernel to load if
pre-boot NX is enabled.
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/all/20220329184743.798513-1-pjones@redhat.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The helpers in arch/x86/boot/compressed/efi.c might be used during
early boot to access the EFI system/config tables, and in some cases
these EFI helpers might attempt to print debug/error messages, before
console_init() has been called.
__putstr() checks some variables to avoid printing anything before
the console has been initialized, but this isn't enough since those
variables live in .bss, which may not have been cleared yet. This can
lead to a triple-fault occurring, primarily when booting in legacy/CSM
mode (where EFI helpers will attempt to print some debug messages).
Fix this by declaring these globals in .data section instead so there
is no dependency on .bss being cleared before accessing them.
Fixes: c01fce9cef ("x86/compressed: Add SEV-SNP feature detection/setup")
Reported-by: Borislav Petkov <bp@suse.de>
Suggested-by: Thomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220420152613.145077-1-michael.roth@amd.com
There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent security
guarantees. Fortunately, TDX ensures that these are all in the correct
state before the kernel loads, which means the kernel does not need to
modify them.
The conditions to avoid are:
* Any writes to the EFER MSR
* Clearing CR4.MCE
This theoretically makes the guest boot more fragile. If, for instance,
EFER was set up incorrectly and a WRMSR was performed, it will trigger
early exception panic or a triple fault, if it's before early
exceptions are set up. However, this is likely to trip up the guest
BIOS long before control reaches the kernel. In any case, these kinds
of problems are unlikely to occur in production environments, and
developers have good debug tools to fix them quickly.
Change the common boot code to work on TDX and non-TDX systems.
This should have no functional effect on non-TDX systems.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com
TDX guest requires CR0.NE to be set. Clearing the bit triggers #GP(0).
If CR0.NE is 0, the MS-DOS compatibility mode for handling floating-point
exceptions is selected. In this mode, the software exception handler for
floating-point exceptions is invoked externally using the processor’s
FERR#, INTR, and IGNNE# pins.
Using FERR# and IGNNE# to handle floating-point exception is deprecated.
CR0.NE=0 also limits newer processors to operate with one logical
processor active.
Kernel uses CR0_STATE constant to initialize CR0. It has NE bit set.
But during early boot kernel has more ad-hoc approach to setting bit
in the register. During some of this ad-hoc manipulation, CR0.NE is
cleared. This causes a #GP in TDX guests and makes it die in early boot.
Make CR0 initialization consistent, deriving the initial value of CR0
from CR0_STATE. Since CR0_STATE always has CR0.NE=1, this ensures that
CR0.NE is never 0 and avoids the #GP.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-23-kirill.shutemov@linux.intel.com
Port I/O instructions trigger #VE in the TDX environment. In response to
the exception, kernel emulates these instructions using hypercalls.
But during early boot, on the decompression stage, it is cumbersome to
deal with #VE. It is cleaner to go to hypercalls directly, bypassing #VE
handling.
Hook up TDX-specific port I/O helpers if booting in TDX environment.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-17-kirill.shutemov@linux.intel.com
Port I/O instructions trigger #VE in the TDX environment. In response to
the exception, kernel emulates these instructions using hypercalls.
But during early boot, on the decompression stage, it is cumbersome to
deal with #VE. It is cleaner to go to hypercalls directly, bypassing #VE
handling.
Add a way to hook up alternative port I/O helpers in the boot stub with
a new pio_ops structure. For now, set the ops structure to just call
the normal I/O operation functions.
out*()/in*() macros redefined to use pio_ops callbacks. It eliminates
need in changing call sites. io_delay() changed to use port I/O helper
instead of inline assembly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-16-kirill.shutemov@linux.intel.com
There are two implementations of port I/O helpers: one in the kernel and
one in the boot stub.
Move the helpers required for both to <asm/shared/io.h> and use the one
implementation everywhere.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-15-kirill.shutemov@linux.intel.com
The early decompression code does port I/O for its console output. But,
handling the decompression-time port I/O demands a different approach
from normal runtime because the IDT required to support #VE based port
I/O emulation is not yet set up. Paravirtualizing I/O calls during
the decompression step is acceptable because the decompression code
doesn't have a lot of call sites to IO instruction.
To support port I/O in decompression code, TDX must be detected before
the decompression code might do port I/O. Detect whether the kernel runs
in a TDX guest.
Add an early_is_tdx_guest() interface to query the cached TDX guest
status in the decompression code.
TDX is detected with CPUID. Make cpuid_count() accessible outside
boot/cpuflags.c.
TDX detection in the main kernel is very similar. Move common bits
into <asm/shared/tdx.h>.
The actual port I/O paravirtualization will come later in the series.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-13-kirill.shutemov@linux.intel.com
SEV-SNP guests will be provided the location of special 'secrets' and
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the run-time kernel either through a boot_params field that
was initialized by the boot/compressed kernel, or via a setup_data
structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing blob from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
run-time kernel will use when servicing CPUID instructions via a #VC
handler.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-40-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-39-brijesh.singh@amd.com
The run-time kernel will need to access the Confidential Computing blob
very early during boot to access the CPUID table it points to. At that
stage, it will be relying on the identity-mapped page table set up by
the boot/compressed kernel, so make sure the blob and the CPUID table it
points to are mapped in advance.
[ bp: Massage. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-38-brijesh.singh@amd.com
SEV-specific code will need to add some additional mappings, but doing
this within ident_map_64.c requires some SEV-specific helpers to be
exported and some SEV-specific struct definitions to be pulled into
ident_map_64.c. Instead, export add_identity_map() so SEV-specific (and
other subsystem-specific) code can be better contained outside of
ident_map_64.c.
While at it, rename the function to kernel_add_identity_map(), similar
to the kernel_ident_mapping_init() function it relies upon.
No functional changes.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-37-brijesh.singh@amd.com
SEV-SNP guests will be provided the location of special 'secrets'
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the boot kernel either through an EFI config table entry,
or via a setup_data structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
boot kernel will use when servicing CPUID instructions via a #VC CPUID
handler.
[ bp: s/cpuid/CPUID/ ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-36-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-35-brijesh.singh@amd.com
This code will also be used later for SEV-SNP-validated CPUID code in
some cases, so move it to a common helper.
While here, also add a check to terminate in cases where the CPUID
function/subfunction is indexed and the subfunction is non-zero, since
the GHCB MSR protocol does not support non-zero subfunctions.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-32-brijesh.singh@amd.com
Future patches for SEV-SNP-validated CPUID will also require early
parsing of the EFI configuration. Incrementally move the related code
into a set of helpers that can be re-used for that purpose.
In this instance, the current acpi.c kexec handling is mainly used to
get the alternative EFI config table address provided by kexec via a
setup_data entry of type SETUP_EFI. If not present, the code then falls
back to normal EFI config table address provided by EFI system table.
This would need to be done by all call-sites attempting to access the
EFI config table, so just have efi_get_conf_table() handle that
automatically.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-29-brijesh.singh@amd.com
Future patches for SEV-SNP-validated CPUID will also require early
parsing of the EFI configuration. Incrementally move the related code
into a set of helpers that can be re-used for that purpose.
[ bp: Unbreak unnecessarily broken lines. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-28-brijesh.singh@amd.com
Future patches for SEV-SNP-validated CPUID will also require early
parsing of the EFI configuration. Incrementally move the related code
into a set of helpers that can be re-used for that purpose.
[ bp: Remove superfluous zeroing of a stack variable. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-27-brijesh.singh@amd.com
Future patches for SEV-SNP-validated CPUID will also require early
parsing of the EFI configuration. Incrementally move the related
code into a set of helpers that can be re-used for that purpose.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-26-brijesh.singh@amd.com
Future patches for SEV-SNP-validated CPUID will also require early
parsing of the EFI configuration. Incrementally move the related code
into a set of helpers that can be re-used for that purpose.
First, carve out the functionality which determines the EFI environment
type the machine is booting on.
[ bp: Massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-25-brijesh.singh@amd.com
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest use a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
If hypervisor can not work with the guest provided GPA then terminate the
guest boot.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-17-brijesh.singh@amd.com
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The VMs can request the
hypervisor to add pages in the RMP table via the Page State Change
VMGEXIT defined in the GHCB specification.
Inside each RMP entry is a Validated flag; this flag is automatically
cleared to 0 by the CPU hardware when a new RMP entry is created for a
guest. Each VM page can be either validated or invalidated, as indicated
by the Validated flag in the RMP entry. Memory access to a private page
that is not validated generates a #VC. A VM must use the PVALIDATE
instruction to validate a private page before using it.
To maintain the security guarantee of SEV-SNP guests, when transitioning
pages from private to shared, the guest must invalidate the pages before
asking the hypervisor to change the page state to shared in the RMP table.
After the pages are mapped private in the page table, the guest must
issue a page state change VMGEXIT to mark the pages private in the RMP
table and validate them.
Upon boot, BIOS should have validated the entire system memory.
During the kernel decompression stage, early_setup_ghcb() uses
set_page_decrypted() to make the GHCB page shared (i.e. clear encryption
attribute). And while exiting from the decompression, it calls
set_page_encrypted() to make the page private.
Add snp_set_page_{private,shared}() helpers that are used by
set_page_{decrypted,encrypted}() to change the page state in the RMP
table.
[ bp: Massage commit message and comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-16-brijesh.singh@amd.com
The Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide hardware isolated abstraction
layers within a VM. VMPL0 is the highest privilege level, and VMPL3 is
the least privilege level. Certain operations must be done by the VMPL0
software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SNP support requires that the guest kernel is running at
VMPL0. Add such a check to verify the guest is running at level 0 before
continuing the boot. There is no easy method to query the current VMPL
level, so use the RMPADJUST instruction to determine whether the guest
is running at the VMPL0.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-15-brijesh.singh@amd.com
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
The GHCB specification defines the reason code for reason set 0. The
reason codes defined in the set 0 do not cover all possible causes for a
guest to request termination.
The reason sets 1 to 255 are reserved for the vendor-specific codes.
Reserve the reason set 1 for the Linux guest. Define the error codes for
reason set 1 so that one can have meaningful termination reasons and thus
better guest failure diagnosis.
While at it, change sev_es_terminate() to accept a reason set parameter.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-11-brijesh.singh@amd.com
With upcoming SEV-SNP support, SEV-related features need to be
initialized earlier during boot, at the same point the initial #VC
handler is set up, so that the SEV-SNP CPUID table can be utilized
during the initial feature checks. Also, SEV-SNP feature detection
will rely on EFI helper functions to scan the EFI config table for the
Confidential Computing blob, and so would need to be implemented at
least partially in C.
Currently set_sev_encryption_mask() is used to initialize the
sev_status and sme_me_mask globals that advertise what SEV/SME features
are available in a guest. Rename it to sev_enable() to better reflect
that (SME is only enabled in the case of SEV guests in the
boot/compressed kernel), and move it to just after the stage1 #VC
handler is set up so that it can be used to initialize SEV-SNP as well
in future patches.
While at it, re-implement it as C code so that all SEV feature
detection can be better consolidated with upcoming SEV-SNP feature
detection, which will also be in C.
The 32-bit entry path remains unchanged, as it never relied on the
set_sev_encryption_mask() initialization to begin with.
[ bp: Massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-8-brijesh.singh@amd.com
Update all C code to use the new boot_rdmsr()/boot_wrmsr() helpers
instead of relying on inline assembly.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-7-brijesh.singh@amd.com
The current set of helpers used throughout the run-time kernel have
dependencies on code/facilities outside of the boot kernel, so there
are a number of call-sites throughout the boot kernel where inline
assembly is used instead. More will be added with subsequent patches
that add support for SEV-SNP, so take the opportunity to provide a basic
set of helpers that can be used by the boot kernel to reduce reliance on
inline assembly.
Use boot_* prefix so that it's clear these are helpers specific to the
boot kernel to avoid any confusion with the various other MSR read/write
helpers.
[ bp: Disambiguate parameter names and trim comment. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-6-brijesh.singh@amd.com
- Enable strict FORTIFY_SOURCE compile-time validation of memcpy buffers
- Add Clang features needed for FORTIFY_SOURCE support
- Enable FORTIFY_SOURCE for Clang where possible
-----BEGIN PGP SIGNATURE-----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=8qRJ
-----END PGP SIGNATURE-----
Merge tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FORTIFY_SOURCE updates from Kees Cook:
"This series consists of two halves:
- strict compile-time buffer size checking under FORTIFY_SOURCE for
the memcpy()-family of functions (for extensive details and
rationale, see the first commit)
- enabling FORTIFY_SOURCE for Clang, which has had many overlapping
bugs that we've finally worked past"
* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Add Clang support
fortify: Make sure strlen() may still be used as a constant expression
fortify: Use __diagnose_as() for better diagnostic coverage
fortify: Make pointer arguments const
Compiler Attributes: Add __diagnose_as for Clang
Compiler Attributes: Add __overloadable for Clang
Compiler Attributes: Add __pass_object_size for Clang
fortify: Replace open-coded __gnu_inline attribute
fortify: Update compile-time tests for Clang 14
fortify: Detect struct member overflows in memset() at compile-time
fortify: Detect struct member overflows in memmove() at compile-time
fortify: Detect struct member overflows in memcpy() at compile-time
Since switch to simplefb/simpledrm VESA graphic mode selection with vga=
kernel parameter is no longer available with legacy BIOS.
The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.
This option is selected by vesafb but not simplefb/simpledrm.
To enable use of VESA modes with simplefb in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select
the option from sysfb rather than the drivers that depend on it.
The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86
platform, move it from fbdev to x86 Kconfig.
Fixes: e3263ab389 ("x86: provide platform-devices for boot-framebuffers")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de
Now that we have SYM_FUNC_ALIAS() and SYM_FUNC_ALIAS_WEAK(), use those
to simplify the definition of function aliases across arch/x86.
For clarity, where there are multiple annotations such as
EXPORT_SYMBOL(), I've tried to keep annotations grouped by symbol. For
example, where a function has a name and an alias which are both
exported, this is organised as:
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
EXPORT_SYMBOL(func)
SYM_FUNC_ALIAS(alias, func)
EXPORT_SYMBOL(alias)
Where there are only aliases and no exports or other annotations, I have
not bothered with line spacing, e.g.
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
SYM_FUNC_ALIAS(alias, func)
The tools/perf/ copies of memset_64.S and memset_64.S are updated
likewise to avoid the build system complaining these are mismatched:
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
| diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
| diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
As done for memcpy(), also update memmove() to use the same tightened
compile-time checks under CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.
There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.
To limit the use of such broken compressed files, this commit renames
the existing macros as follows:
cmd_bzip2 --> cmd_bzip2_with_size
cmd_lzma --> cmd_lzma_with_size
cmd_lzo --> cmd_lzo_with_size
cmd_lz4 --> cmd_lz4_with_size
cmd_xzkern --> cmd_xzkern_with_size
cmd_zstd22 --> cmd_zstd22_with_size
To keep the decompressors working, I updated the following Makefiles
accordingly:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/mips/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/x86/boot/compressed/Makefile
I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.
I did not touch the following:
arch/arc/boot/Makefile
arch/arm64/boot/Makefile
arch/csky/boot/Makefile
arch/mips/boot/Makefile
arch/riscv/boot/Makefile
arch/sh/boot/Makefile
kernel/Makefile
This means those Makefiles will stop appending the size data.
I dropped the 'override size_append' hack from usr/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
- support taking the measurement of the initrd when loaded via the
LoadFile2 protocol
- kobject API cleanup from Greg
- some header file whitespace fixes
-----BEGIN PGP SIGNATURE-----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=BY66
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- support taking the measurement of the initrd when loaded via the
LoadFile2 protocol
- kobject API cleanup from Greg
- some header file whitespace fixes
* tag 'efi-next-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: use default_groups in kobj_type
efi/libstub: measure loaded initrd info into the TPM
efi/libstub: consolidate initrd handling across architectures
efi/libstub: x86/mixed: increase supported argument count
efi/libstub: add prototype of efi_tcg2_protocol::hash_log_extend_event()
include/linux/efi.h: Remove unneeded whitespaces before tabs
Michael Roth