Commit:
82c3768b8d ("efi/capsule-loader: Use a cached copy of the capsule header")
... refactored the capsule loading code that maps the capsule header,
to avoid having to map it several times.
However, as it turns out, the vmap() call we ended up removing did not
just map the header, but the entire capsule image, and dropping this
virtual mapping breaks capsules that are processed by the firmware
immediately (i.e., without a reboot).
Unfortunately, that change was part of a larger refactor that allowed
a quirk to be implemented for Quark, which has a non-standard memory
layout for capsules, and we have slightly painted ourselves into a
corner by allowing quirk code to mangle the capsule header and memory
layout.
So we need to fix this without breaking Quark. Fortunately, Quark does
not appear to care about the virtual mapping, and so we can simply
do a partial revert of commit:
2a457fb31d ("efi/capsule-loader: Use page addresses rather than struct page pointers")
... and create a vmap() mapping of the entire capsule (including header)
based on the reinstated struct page array, unless running on Quark, in
which case we pass the capsule header copy as before.
Reported-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Ge Song <ge.song@hxt-semitech.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 82c3768b8d ("efi/capsule-loader: Use a cached copy of the capsule header")
Link: http://lkml.kernel.org/r/20180102172110.17018-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ARM SoC fixes for this merge window:
- A revert of all SCPI changes from the 4.15 merge window. They had
regressions on the Amlogic platforms, and the submaintainer isn't
around to fix these bugs due to vacation, etc. So we agreed to revert
and revisit in next release cycle.
- A series fixing a number of bugs for ARM CCN interconnect, around
module unload, smp_processor_id() in preemptable context, and fixing
some memory allocation failure checks.
- A handful of devicetree fixes for different platforms, fixing
warnings and errors that were previously ignored by the compiler.
- The usual set of mostly minor fixes for different platforms.
-----BEGIN PGP SIGNATURE-----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=DIHP
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- A revert of all SCPI changes from the 4.15 merge window. They had
regressions on the Amlogic platforms, and the submaintainer isn't
around to fix these bugs due to vacation, etc. So we agreed to revert
and revisit in next release cycle.
- A series fixing a number of bugs for ARM CCN interconnect, around
module unload, smp_processor_id() in preemptable context, and fixing
some memory allocation failure checks.
- A handful of devicetree fixes for different platforms, fixing
warnings and errors that were previously ignored by the compiler.
- The usual set of mostly minor fixes for different platforms.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM64: dts: meson-gx: fix UART pclk clock name
ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
ARM: dts: Fix dm814x missing phy-cells property
ARM: dts: Fix elm interrupt compiler warning
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Simplify code
bus: arm-ccn: Check memory allocation failure
bus: arm-ccn: constify attribute_group structures.
firmware: arm_scpi: Revert updates made during v4.15 merge window
arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
arm64: dts: sort vendor subdirectories in Makefile alphabetically
meson-gx-socinfo: Fix package id parsing
ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
ARM: dts: meson: fix the memory region of the GPIO interrupt controller
ARM: dts: meson: correct the sort order for the the gpio_intc node
MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
arm64: dts: uniphier: remove unnecessary interrupt-parent
...
/sys/firmware/efi/systab shows several different values, it breaks sysfs
one file one value design. But since there are already userspace tools
depend on it eg. kexec-tools so add code comment to alert future expanding
of this file.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The remapping result of memremap() should be freed with memunmap(), not kfree().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.
So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one more
MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that was
not in linux-next, but should not be an issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia6IQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykaKwCgx1lw4qMmetUzjKBX+OMgEkFZo3UAoIL/DLiB
ZyMb52XWdP0pScSsFUyn
=riSs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one
more MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that
was not in linux-next, but should not be an issue"
* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: update Android driver maintainers.
firmware: vpd: Fix platform driver and device registration/unregistration
firmware: vpd: Tie firmware kobject to device lifetime
firmware: vpd: Destroy vpd sections in remove function
hv: kvp: Avoid reading past allocated blocks from KVP file
Drivers: hv: vmbus: Fix a rescind issue
ANDROID: binder: fix transaction leak.
A couple of bugfixes that just became ready.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaIW15AAoJECgfDbjSjVRprxIH/RzUfSAfgaxhIVm2j3CRarGS
G0xJvKxuXpiDnEtfu5st9QRqNo8CMuPV02kIaOb0Aqq2GfdEb0sCFMTLbfnYuXul
uECu3uquXMUbuRXffQCHnDN4qqDWKRim8STIDPUlxjnBQqkos+JFn+MQ3vF2KEI0
SeA8u1YQs5Ji10ZPjZ7FEAirbxDFiLPb0Hb0tphBGSZPXBRV3qoA4qeKNOy45EkQ
F4J/1YxX/nWca0HYjBl2NceIqc4U/HcNZpner5YcJLad6SQSU9mSfEnJJIhOrRmu
/Ivn6Q1822/YVdePDcffLIrvFvM4HprT4BUYv0Cd/cTZZRFMCa16OXmDcPrWcLo=
=Nvzh
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"virtio and qemu bugfixes
A couple of bugfixes that just became ready"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix increment of vb->num_pfns in fill_balloon()
virtio: release virtio index when fail to device_register
fw_cfg: fix driver remove
Revert "Merge tag 'scpi-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers"
Paraphrased from email from Kevin Hilman:
Revert ARM SCPI changes since v4.14.
Untested changes caused regressions in SCPI and CPUfreq/DVFS failures
on most Amlogic SoCs. Changes reverted for v4.15 so they can be better
reviewed and tested.
These ARM SCPI changes caused SCPI regressions resulting in CPUfreq
failures on most Amlogic SoCs (found by kernelci.org.)
Unfortunately, this was not caught in linux-next due to other bugs/panics
on these platforms masking this problem so we've only found it since
we've fixed the other issues.
Since we're already in the -rc cycle, I'd prefer to revert to a known
working state (that of v4.14) rather than finding/reverting a subset,
which would just lead to another untested state.
These changes can then have some time to be better reviewed and tested
and resubmitted for v4.16.
Kevin Hilman has tested this revert on the affected Amlogic SoCs and
verified that we're back to the previous (working) condition.
This reverts commit 6710acf259, reversing
changes made to 4b367f2e88.
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
On driver remove(), all objects created during probe() should be
removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder
functions to match probe() error cleanup code.
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The driver exit function needs to unregister both platform device and
driver. Also, during registration, register driver first and perform
error checks.
Fixes: 049a59db34 ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't make sense to have /sys/firmware/vpd if the device is not
instantiated, so tie its lifetime to the device.
Fixes: 049a59db34 ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vpd sections are initialized during probe and thus should be destroyed
in the remove function.
Fixes: 049a59db34 ("firmware: Google VPD sysfs driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also adds missing call to
destroy_timer_on_stack().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds an interface for configuring Qualcomm's "secure SMMU" and adds
support for booting the modem Hexagon on MSM8996.
Two new debugfs entries are added in the remoteproc core to introspect the list
of memory carveouts and the loaded resource table.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lnNj
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.15' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds an interface for configuring Qualcomm's "secure SMMU" and
adds support for booting the modem Hexagon on MSM8996.
Two new debugfs entries are added in the remoteproc core to introspect
the list of memory carveouts and the loaded resource table"
* tag 'rproc-v4.15' of git://github.com/andersson/remoteproc:
remoteproc: qcom: Fix error handling paths in order to avoid memory leaks
remoteproc: qcom: Drop pr_err in q6v5_xfer_mem_ownership()
remoteproc: debug: add carveouts list dump feature
remoteproc: debug: add resource table dump feature
remoteproc: qcom: Add support for mss remoteproc on msm8996
remoteproc: qcom: Make secure world call for mem ownership switch
remoteproc: qcom: refactor mss fw image loading sequence
firmware: scm: Add new SCM call API for switching memory ownership
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
Fixes in qemu, vhost and virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaDdyiAAoJECgfDbjSjVRpEekIAMh6WWhjHWSG1PukqSZYiHEN
S1GU+wViGLai9zI54o8/VcRcRMuJMcN/HiYXh/28N3v4MzSxtJy12c/oV13zexAZ
ypALoQM6Fazm1hPdAMujFAQ4rgAgYFZ98822HU3rXwfS+jW1JY/LV0cLoIL9BStQ
aHLr06GGv/Xq3aibECaKvzFcKXi9qCz6Cuw/aKPMmDo89RSvxQyMhneaEW6YyT2L
Srt2lke0W4UbozMAe3UT2SwOMTEpSOnmrTDGqvU4gFtfgAm6Z8HkM1HA/i010Dcc
FsSfa5N9yLD9WodEyKgU0qh3yvhkLwg/Sfiu/KBbbbSSQzjkuqW+XWWJwOAitWA=
=1iSK
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Fixes in qemu, vhost and virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
fw_cfg: fix the command line module name
vhost/vsock: fix uninitialized vhost_vsock->guest_cid
vhost: fix end of range for access_ok
vhost/scsi: Use safe iteration in vhost_scsi_complete_cmd_work()
virtio_balloon: fix deadlock on OOM
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull ARM fixes from Russell King:
- omit EFI memory map sorting, which was recently introduced, but
caused problems with the decompressor due to additional sections
being emitted.
- avoid unaligned load fault-generating instructions in the
decompressor by switching to a private unaligned implementation.
- add a symbol into the decompressor to further debug non-boot
situations (ld's documentation is extremely poor for how "." works,
ld doesn't seem to follow its own documentation!)
- parse endian information to sparse
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: add debug ".edata_real" symbol
ARM: 8716/1: pass endianness info to sparse
efi/libstub: arm: omit sorting of the UEFI memory map
ARM: 8715/1: add a private asm/unaligned.h
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
The PSCI checker suspend_test_thread() function (ie executed for the
suspend test) requires an on-stack timer to carry out the test it
executes; it sets it up through the setup_timer_on_stack() API.
setup_timer_on_stack() requires its counterpart destroy_timer_on_stack()
to be called when the timer is disposed of but the PSCI checker code is
currently missing that call, leaving the timer object in an incosistent
state when the PSCI checker stops the thread executing the suspend
test.
Add the missing destroy_timer_on_stack() call to fix the omission.
Fixes: ea8b1c4a60 ("drivers: psci: PSCI checker module")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=b5wy
-----END PGP SIGNATURE-----
Merge tag 'keystone_soc_drivers_4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers
Pull "Keystone SOC for 4.15" from Santosh Shilimkar
* tag 'keystone_soc_drivers_4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ti_sci: Use %pS printk format for direct addresses
This contains a couple of (non-critical) fixes and improvements for the
BPMP driver as well as support for debugfs.
-----BEGIN PGP SIGNATURE-----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=yEfs
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.15-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "firmware: tegra: Changes for v4.15-rc1" from Thierry Reding:
This contains a couple of (non-critical) fixes and improvements for the
BPMP driver as well as support for debugfs.
* tag 'tegra-for-4.15-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Add BPMP debugfs support
firmware: tegra: Add stubs when BPMP not enabled
firmware: tegra: Expose tegra_bpmp_mrq_return()
firmware: tegra: Propagate error code to caller
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two different processors on a SOC need to switch memory ownership
during load/unload. To enable this, second level memory map table
need to be updated, which is done by secure layer.
This patch adds the interface for making secure monitor call for
memory ownership switching request.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
[bjorn: Minor style and kerneldoc updates]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
ARM shares its EFI stub implementation with arm64, which has some
special handling in the virtual remapping code to
a) make sure that we can map everything even if the OS executes
with 64k page size, and
b) make sure that adjacent regions with the same attributes are not
reordered or moved apart in memory.
The latter is a workaround for a 'feature' that was shortly recommended
by UEFI spec v2.5, but deprecated shortly after, due to the fact that
it broke many OS installers, including non-Linux ones, and it was never
widely implemented for ARM systems. Before implementing b), the arm64
code simply rounded up all regions to 64 KB granularity, but given that
that results in moving adjacent regions apart, it had to be refined when
b) was implemented.
The adjacency check requires a sort() pass, due to the fact that the
UEFI spec does not mandate any ordering, and the inclusion of the
lib/sort.c code into the ARM EFI stub is causing some trouble with
the decompressor build due to the fact that its EXPORT_SYMBOL() call
triggers the creation of ksymtab/kcrctab sections.
So let's simply do away with the adjacency check for ARM, and simply put
all UEFI runtime regions together if they have the same memory attributes.
This is guaranteed to work, given that ARM only supports 4 KB pages,
and allows us to remove the sort() call entirely.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit:
e69176d68d ("ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region")
implemented randomization of the virtual mapping that the OS chooses for
the UEFI runtime services. This was motivated by the fact that UEFI usually
does not bother to specify any permission restrictions for those regions,
making them prime real estate for exploitation now that the OS is getting
more and more careful not to leave any R+W+X mapped regions lying around.
However, this randomization breaks assumptions in the resume from
hibernation code, which expects all memory regions populated by UEFI to
remain in the same place, including their virtual mapping into the OS
memory space. While this assumption may not be entirely reasonable in the
first place, breaking it deliberately does not make a lot of sense either.
So let's refrain from this randomization pass if CONFIG_HIBERNATION=y.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171025100448.26056-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If "qcaps.capsule_count" is ULONG_MAX then "qcaps.capsule_count + 1"
will overflow to zero and kcalloc() will return the ZERO_SIZE_PTR. We
try to dereference it inside the loop and crash.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ivan Hu <ivan.hu@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: ff6301dabc ("efi: Add efi_test driver for exporting UEFI runtime service interfaces")
Link: http://lkml.kernel.org/r/20171025100448.26056-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
workqueue: kill off ACCESS_ONCE()
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts the Tegra IVC code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-3-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Add SCM firmware APIs for download mode and secure IO service
* Add SMEM support for cached entries
* Add SMEM support for global partition, dynamic item limit, and more hosts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9wWp
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Pull "Qualcomm ARM Based Driver Updates for v4.15" from Andy Gross:
* Add SCM firmware APIs for download mode and secure IO service
* Add SMEM support for cached entries
* Add SMEM support for global partition, dynamic item limit, and more hosts
* tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom: scm: Expose download-mode control
firmware: qcom: scm: Expose secure IO service
soc: qcom: smem: Increase the number of hosts
soc: qcom: smem: Support dynamic item limit
soc: qcom: smem: Support global partition
soc: qcom: smem: Read version from the smem header
soc: qcom: smem: Use le32_to_cpu for comparison
soc: qcom: smem: Support getting cached entries
soc: qcom: smem: Rename "uncached" accessors
Tegra power management firmware running on the co-processor (BPMP)
implements a simple pseudo file system akin to debugfs. The file
system can be used for debugging purposes to examine and change the
status of selected resources controlled by the firmware (such as
clocks, resets, voltages, powergates, ...).
Add support to "mirror" the firmware's file system to debugfs. At
boot, query firmware for a list of all possible files and create
corresponding debugfs entries. Read/write of individual files is
implemented by sending a Message ReQuest (MRQ) that passes the full
file path name and data to firmware via DRAM.
Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Expose and export the tegra_bpmp_mrq_return() function for use by
drivers outside the core BPMP driver. This function is used to reply to
messages originating from the BPMP, which is required in the thermal
driver.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Response messages from Tegra BPMP firmware contain an error return code
as the first word of payload. The error code is used to indicate
incorrectly formatted request message or use of non-existing resource
(clk, reset, powergate) identifier. Current implementation of
tegra_bpmp_transfer() ignores this code and does not pass it to caller.
Fix this by adding an extra struct member to tegra_bpmp_message and
populate that with return code.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to aid post-mortem debugging the Qualcomm platforms provide a
"memory download mode", where the boot loader will provide an interface
for custom tools to "download" the content of RAM to a host machine.
The mode is triggered by writing a magic value somewhere in RAM, that is
read in the boot code path after a warm-restart. Two mechanism for
setting this magic value are supported in modern platforms; a direct SCM
call to enable the mode or through a secure io write of a magic value.
In order for a normal reboot not to trigger "download mode" the magic
must be cleared during a clean reboot.
Download mode has to be enabled by including qcom_scm.download_mode=1 on
the command line.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The secure IO service provides operations for reading and writing secure
memory from non-secure mode, expose this API through SCM.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use the %pS printk format for printing symbols from direct addresses.
This is important for the ia64, ppc64 and parisc64 architectures, while on
other architectures there is no difference between %pS and %pF.
Fix it for consistency across the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
At several positions in the code sparse complains about incorrect access
to __iomem annotated memory. Fix this and make sparse happy.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Both clk_get_value and sensor_value structures contains a single element
and hence needs no packing making the whole structure defination
unnecessary.
This patch gets rid of both those unnecessary structures.
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch drops the only present type cast of the SCPI payload pointer
to scpi_shared_mem inorder to align with other occurrences, IOW for
consistency.
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
lo_val and hi_val together in this order are a little endian 64 bit value.
Therefore we can simplify struct sensor_value and the code by defining
it as a __le64 value and by using le64_to_cpu.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
By using FIELD_GET and proper masks we can avoid quite some shifting
and masking macro magic and make the code better readable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Making the header subfields members of struct dvfs_info allows to make
the code better readable and avoids some macro magic.
In addition remove a useless statement using info->latency.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
sysfs_create_groups and of_platform_populate can be replaced with the
device-managed versions what allows us to remove scpi_remove.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make freeing the mbox channels device-managed, thus further simplifying
scpi_remove and and one further step to get rid of scpi_remove.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pre-populating the dvfs info data in scpi_probe allows to make all
memory allocations device-managed. This helps to simplify scpi_remove
and eventually to get rid of scpi_remove completely.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[sudeep.holla: changed to continue probe even if scpi_dvfs_populate_info fails]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Both memory areas are free'd anyway when the device is destroyed,
so we don't have to do it manually.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There's no benefit using drvdata as variable scpi_info is global.
Setting scpi_info to NULL in scpi_remove isn't needed too. If arm_scpi
is built-in, then this code is never used. And if arm_scpi is built as
a module and some other module calls get_scpi_ops() then due to this
dependency scpi_remove is called only after the other module has been
removed.
Last but not least, users usually store the result of get_scpi_ops(),
therefore setting scpi_info to NULL wouldn't really help.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[sudeep.holla: reworded the commit log a bit]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
-----BEGIN PGP SIGNATURE-----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=ERLM
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid
Pull uuid updates from Christoph Hellwig:
"Just a single conversion to the new UUID API for this merge window"
* tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid:
efi: switch to use new generic UUID API
This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver subsystems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yBzS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
Ard Biesheuvel