Commit Graph

19 Commits

Author SHA1 Message Date
Claudiu Beznea c57aaaa28c clk: at91: clk-programmable: add mux_table option
Add mux table option. This is necessary for IP versions that has
gaps in the range of available clock sources (e.g. SAMA7G5).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Claudiu Beznea b4c115c761 clk: at91: clk-peripheral: add support for changeable parent rate
Some peripheral clocks on SAMA7G5 supports requesting parent to change
its rate (image related clocks: csi, csi2dc, isc). Add support
so that if registered with this option the clock rate to be
requested from parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Claudiu Beznea 22a1dfe93b clk: at91: clk-generated: add mux_table option
Add mux table option. This is necessary for IP versions that has
gaps in the range of available clock sources (e.g. SAMA7G5).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Claudiu Beznea 64c9247b9e clk: at91: clk-generated: pass the id of changeable parent at registration
Pass the ID of changeable parent at registration. This will allow
the scalability of this clock driver with regards to the changeable
parent ID for versions of this IP where changeable parent is not the
last one in the parents list (e.g. SAMA7G5). With this the clock flags
are set to zero in case we have no changeable parent. Also in
clk_generated_best_diff() the *best_diff variable is check against
tmp_diff variable using ">=" operator instead of ">" so that in case
the requested frequency could be obtained using fix parents + gck
dividers but the clock also supports changeable parent to be able
to force the usage of the changeable parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Michał Mirosław 03a1ee1dad clk: at91: allow setting all PMC clock parents via DT
We need to have clocks accessible via phandle to select them
as peripheral clock parent using assigned-clock-parents in DT.
Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26 20:22:50 -07:00
Michał Mirosław 99767cd440 clk: at91: allow setting PCKx parent via DT
This exposes PROGx clocks for use in assigned-clocks DeviceTree property
for selecting PCKx parent clock.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26 20:22:43 -07:00
Michał Mirosław 7425f246f7 clk: at91: optimize pmc data allocation
Alloc whole data structure in one block. This makes the code shorter,
more efficient and easier to extend in following patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26 20:22:34 -07:00
Codrin Ciubotariu 99e107439e clk: at91: Add peripheral clock for PTC
PMC generates the peripheral clock for the PTC.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lkml.kernel.org/r/20200515142720.290206-1-codrin.ciubotariu@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26 20:21:36 -07:00
Alexandre Belloni 6956eb33ab clk: at91: fix possible deadlock
Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-16 09:56:18 -08:00
Eugen Hristev 81a6b601f9 clk: at91: allow 24 Mhz clock as input for PLL
The PLL input range needs to be able to allow 24 Mhz crystal as input
Update the range accordingly in plla characteristics struct

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:00:31 -07:00
Stephen Boyd ff060019f4 Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769
 - Rework AT91 sckc DT bindings
 - Fix slow RC oscillator issue on sama5d3
 - AT91 sam9x60 PMC support
 - SiFive FU540 PRCI and PLL support

* clk-stm32f4:
  clk: stm32mp1: Add ddrperfm clock
  clk: stm32: Introduce clocks of STM32F769 board

* clk-tegra:
  clk: tegra: divider: Mark Memory Controller clock as read-only
  clk: tegra: emc: Replace BUG() with WARN_ONCE()
  clk: tegra: emc: Fix EMC max-rate clamping
  clk: tegra: emc: Support multiple RAM codes
  clk: tegra: emc: Don't enable EMC clock manually
  clk: tegra124: Remove lock-enable bit from PLLM
  clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
  clk: tegra: Don't enable already enabled PLLs

* clk-at91:
  clk: at91: Mark struct clk_range as const
  clk: at91: add sam9x60 pmc driver
  dt-bindings: clk: at91: add bindings for SAM9X60 pmc
  clk: at91: add sam9x60 PLL driver
  clk: at91: master: Add sam9x60 support
  clk: at91: usb: Add sam9x60 support
  clk: at91: allow configuring generated PCR layout
  clk: at91: allow configuring peripheral PCR layout
  clk: at91: sckc: handle different RC startup time
  clk: at91: modernize sckc binding
  dt-bindings: clock: at91: new sckc bindings

* clk-sifive-fu540:
  clk: sifive: add a driver for the SiFive FU540 PRCI IP block
  clk: analogbits: add Wide-Range PLL library
  dt-bindings: clk: add documentation for the SiFive PRCI driver

* clk-spdx:
  clk: sunxi-ng: Use the correct style for SPDX License Identifier
  clk: sprd: Use the correct style for SPDX License Identifier
  clk: renesas: Use the correct style for SPDX License Identifier
  clk: qcom: Use the correct style for SPDX License Identifier
  clk: davinci: Use the correct style for SPDX License Identifier
  clk: actions: Use the correct style for SPDX License Identifier
2019-05-07 11:45:29 -07:00
Stephen Boyd 7b4c162e03 clk: at91: Mark struct clk_range as const
It's just some static data that doesn't get changed after being used.
Mark it const everywhere.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 14:16:26 -07:00
Alexandre Belloni e4cfb823bd clk: at91: allow configuring generated PCR layout
The PCR register layout for GCLKCSS is changing for the future SoCs, allow
configuring it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 12:34:03 -07:00
Alexandre Belloni cb4f4949b1 clk: at91: allow configuring peripheral PCR layout
The PCR register actually changed layout for each SoC. By chance, this
didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven
bits wide and sama5d4 and sama5d2 don't have DIV.

For the DT backward compatibility, keep the layout as is.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 12:34:03 -07:00
Matthias Wieloch 45b0668211 clk: at91: fix programmable clock for sama5d2
The prescaler formula of the programmable clock has changed for sama5d2.
Update the driver accordingly.

Fixes: a2038077de ("clk: at91: add sama5d2 PMC driver")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[nicolas.ferre@microchip.com: adapt the prescaler range,
		fix clk_programmable_recalc_rate, split patch]
Signed-off-by: Matthias Wieloch <matthias.wieloch@few-bauer.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-18 12:50:31 -07:00
Stephen Boyd bd5e2ea291 Merge branch 'clk-at91' into clk-next
* clk-at91:
  clk: at91: programmable: remove unneeded register read
  clk: at91: optimize clk_round_rate() for AUDIO_PLL
  clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
2019-03-08 10:29:47 -08:00
Alexandre Belloni 65a91e2e59 clk: at91: fix masterck name
The master clock is actually named masterck earlier in the driver. Having
"mck" in the parent list means that it can never be selected.

Fixes: 1eabdc2f9d ("clk: at91: add at91sam9x5 PMCs driver")
Fixes: a2038077de ("clk: at91: add sama5d2 PMC driver")
Fixes: 084b696bb5 ("clk: at91: add sama5d4 pmc driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20 11:40:21 -08:00
Michał Mirosław 77977b8004 clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
Datasheet for SAMA5D2x mentions 6 sources for PCKx, the last being AUDIOPLL.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09 11:49:35 -08:00
Alexandre Belloni a2038077de clk: at91: add sama5d2 PMC driver
Add a driver for the PMC clocks of the sama5d2

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17 10:44:53 -07:00