Pull x86/pti updates from Thomas Gleixner:
"A mixed bag of fixes and updates for the ghosts which are hunting us.
The scheduler fixes have been pulled into that branch to avoid
conflicts.
- A set of fixes to address a khread_parkme() race which caused lost
wakeups and loss of state.
- A deadlock fix for stop_machine() solved by moving the wakeups
outside of the stopper_lock held region.
- A set of Spectre V1 array access restrictions. The possible
problematic spots were discuvered by Dan Carpenters new checks in
smatch.
- Removal of an unused file which was forgotten when the rest of that
functionality was removed"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove unused file
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Introduce set_special_state()
kthread, sched/wait: Fix kthread_parkme() completion issue
kthread, sched/wait: Fix kthread_parkme() wait-loop
sched/fair: Fix the update of blocked load when newly idle
stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
Pull scheduler fix from Thomas Gleixner:
"Revert the new NUMA aware placement approach which turned out to
create more problems than it solved"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
This reverts commit 7347fc87df.
Srikar Dronamra pointed out that while the commit in question did show
a performance improvement on ppc64, it did so at the cost of disabling
active CPU migration by automatic NUMA balancing which was not the intent.
The issue was that a serious flaw in the logic failed to ever active balance
if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled,
the logic is still bizarre and against the original intent.
Investigation showed that fixing the patch in either the way he suggested,
using the correct comparison for jiffies values or introducing a new
numa_migrate_deferred variable in task_struct all perform similarly to a
revert with a mix of gains and losses depending on the workload, machine
and socket count.
The original intent of the commit was to handle a problem whereby
wake_affine, idle balancing and automatic NUMA balancing disagree on the
appropriate placement for a task. This was particularly true for cases where
a single task was a massive waker of tasks but where wake_wide logic did
not apply. This was particularly noticeable when a futex (a barrier) woke
all worker threads and tried pulling the wakees to the waker nodes. In that
specific case, it could be handled by tuning MPI or openMP appropriately,
but the behavior is not illogical and was worth attempting to fix. However,
the approach was wrong. Given that we're at rc4 and a fix is not obvious,
it's better to play safe, revert this commit and retry later.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ggherdovich@suse.cz
Cc: hpa@zytor.com
Cc: matt@codeblueprint.co.uk
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rbtree: include rcu.h
scripts/faddr2line: fix error when addr2line output contains discriminator
ocfs2: take inode cluster lock before moving reflinked inode from orphan dir
mm, oom: fix concurrent munlock and oom reaper unmap, v3
mm: migrate: fix double call of radix_tree_replace_slot()
proc/kcore: don't bounds check against address 0
mm: don't show nr_indirectly_reclaimable in /proc/vmstat
mm: sections are not offlined during memory hotremove
z3fold: fix reclaim lock-ups
init: fix false positives in W+X checking
lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit()
KASAN: prohibit KASAN+STRUCTLEAK combination
MAINTAINERS: update Shuah's email address
load_module() creates W+X mappings via __vmalloc_node_range() (from
layout_and_allocate()->move_module()->module_alloc()) by using
PAGE_KERNEL_EXEC. These mappings are later cleaned up via
"call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module().
This is a problem because call_rcu_sched() queues work, which can be run
after debug_checkwx() is run, resulting in a race condition. If hit,
the race results in a nasty splat about insecure W+X mappings, which
results in a poor user experience as these are not the mappings that
debug_checkwx() is intended to catch.
This issue is observed on multiple arm64 platforms, and has been
artificially triggered on an x86 platform.
Address the race by flushing the queued work before running the
arch-defined mark_rodata_ro() which then calls debug_checkwx().
Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org
Fixes: e1a58320a3 ("x86/mm: Warn on W^X mappings")
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
Easton.
2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.
3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
Silva.
4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
grateful for this fix.
5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
do appreciate.
6) Use after free in TLS code. Once again we are blessed by the
honorable Eric Dumazet with this fix.
7) Fix regression in TLS code causing stalls on partial TLS records.
This fix is bestowed upon us by Andrew Tomt.
8) Deal with too small MTUs properly in LLC code, another great gift
from Eric Dumazet.
9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
Hangbin Liu we give thanks for this.
10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
Paolo Abeni, he gave us this.
11) Range check coalescing parameters in mlx4 driver, thank you Moshe
Shemesh.
12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
David Howells.
13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
you're the best!
14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
Benerjee saved us!
15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
is now water tight, thanks to Andrey Ignatov.
16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
everywhere!
17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
without you!
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
net sched actions: fix refcnt leak in skbmod
net: sched: fix error path in tcf_proto_create() when modules are not configured
net sched actions: fix invalid pointer dereferencing if skbedit flags missing
ixgbe: fix memory leak on ipsec allocation
ixgbevf: fix ixgbevf_xmit_frame()'s return type
ixgbe: return error on unsupported SFP module when resetting
ice: Set rq_last_status when cleaning rq
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
bonding: send learning packets for vlans on slave
bonding: do not allow rlb updates to invalid mac
net/mlx5e: Err if asked to offload TC match on frag being first
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
net/mlx5: Free IRQs in shutdown path
rxrpc: Trace UDP transmission failure
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
rxrpc: Fix the min security level for kernel calls
rxrpc: Fix error reception on AF_INET6 sockets
rxrpc: Fix missing start of call timeout
qed: fix spelling mistake: "taskelt" -> "tasklet"
...
regex_match_front() test was updated to be limited to the size
of the pattern instead of the full test string. But as the test string
is not guaranteed to be nul terminated, it still needs to consider
the size of the test string.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvWzNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhiPAP9bmOzqT3YK+dF19pLJCrmjyF95Wh85
/10xaH3G1Q5e8AEA3ZXQqVNEGnaEs2uO/c5yvTP6/k1WEfGuTqTO5IH2hwI=
=cKB5
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Working on some new updates to trace filtering, I noticed that the
regex_match_front() test was updated to be limited to the size of the
pattern instead of the full test string.
But as the test string is not guaranteed to be nul terminated, it
still needs to consider the size of the test string"
* tag 'trace-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix regex_match_front() to not over compare the test string
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from
drawing excessive power when suspended or off, among other
things (Rafael Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX
as the new CPU frequency in some cases due to a missing check
(Rafael Wysocki).
- Remove a stale comment regarding worker kthreads from the
schedutil cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bCt1
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two PCI power management regressions from the 4.13 cycle and
one cpufreq schedutil governor bug introduced during the 4.12 cycle,
drop a stale comment from the schedutil code and fix two mistakes in
docs.
Specifics:
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from drawing
excessive power when suspended or off, among other things (Rafael
Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX as the
new CPU frequency in some cases due to a missing check (Rafael
Wysocki).
- Remove a stale comment regarding worker kthreads from the schedutil
cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer)"
* tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
PCI / PM: Always check PME wakeup capability for runtime wakeup support
cpufreq: schedutil: Avoid using invalid next_freq
cpufreq: schedutil: remove stale comment
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
PM: docs: sleep-states: Fix a typo ("includig")
The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).
The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.
The solution is to add a simple test if (len < r->len) return 0.
Cc: stable@vger.kernel.org
Fixes: 285caad415 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex(). Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.
If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.
Fix it by adding the memset() back.
Fixes: 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit b7eaf1aab9 (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().
Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().
Fixes: b7eaf1aab9 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 794a56ebd9 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.
Remove the stale comment mentioning it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
when they are writable by root. To fix the confusion, they should
be 0644. Note, either case root can still write to them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuyBchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmDLAQDyddL4DS480WXv3t3I/ZPwjHVuI4qS
cPUsAsjn3Xs9wAD+O6/rE8SL/Q2tUIWlWk9wC4YpGqEoR6R3x98qpnGP3gA=
=L/Kw
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Some of the files in the tracing directory show file mode 0444 when
they are writable by root. To fix the confusion, they should be 0644.
Note, either case root can still write to them.
Zhengyuan asked why I never applied that patch (the first one is from
2014!). I simply forgot about it. /me lowers head in shame"
* tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the file mode of stack tracer
ftrace: Have set_graph_* files have normal file modes
> kernel/sched/core.c:6921 cpu_weight_nice_write_s64() warn: potential spectre issue 'sched_prio_to_weight'
Userspace controls @nice, so sanitize the value before using it to
index an array.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index
to retrieve prog/map specific ops such that we prevent potential out of
bounds value under speculation, from Mark and Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gaurav reported a perceived problem with TASK_PARKED, which turned out
to be a broken wait-loop pattern in __kthread_parkme(), but the
reported issue can (and does) in fact happen for states that do not do
condition based sleeps.
When the 'current->state = TASK_RUNNING' store of a previous
(concurrent) try_to_wake_up() collides with the setting of a 'special'
sleep state, we can loose the sleep state.
Normal condition based wait-loops are immune to this problem, but for
sleep states that are not condition based are subject to this problem.
There already is a fix for TASK_DEAD. Abstract that and also apply it
to TASK_STOPPED and TASK_TRACED, both of which are also without
condition based wait-loop.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Various sockmap fixes from John Fastabend (pinned map handling,
blocking in recvmsg, double page put, error handling during redirect
failures, etc.)
2) Fix dead code handling in x86-64 JIT, from Gianluca Borello.
3) Missing device put in RDS IB code, from Dag Moxnes.
4) Don't process fast open during repair mode in TCP< from Yuchung
Cheng.
5) Move address/port comparison fixes in SCTP, from Xin Long.
6) Handle add a bond slave's master into a bridge properly, from
Hangbin Liu.
7) IPv6 multipath code can operate on unitialized memory due to an
assumption that the icmp header is in the linear SKB area. Fix from
Eric Dumazet.
8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave
Watson.
9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann.
10) RDS leaks kernel memory to userspace, from Eric Dumazet.
11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
dccp: fix tasklet usage
smc: fix sendpage() call
net/smc: handle unregistered buffers
net/smc: call consolidation
qed: fix spelling mistake: "offloded" -> "offloaded"
net/mlx5e: fix spelling mistake: "loobpack" -> "loopback"
tcp: restore autocorking
rds: do not leak kernel memory to user land
qmi_wwan: do not steal interfaces from class drivers
ipv4: fix fnhe usage by non-cached routes
bpf: sockmap, fix error handling in redirect failures
bpf: sockmap, zero sg_size on error when buffer is released
bpf: sockmap, fix scatterlist update on error path in send with apply
net_sched: fq: take care of throttled flows before reuse
ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6"
bpf, x64: fix memleak when not converging on calls
bpf, x64: fix memleak when not converging after image
net/smc: restrict non-blocking connect finish
8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
sctp: fix the issue that the cookie-ack with auth can't get processed
...
Commit 9ef09e35e5 ("bpf: fix possible spectre-v1 in find_and_alloc_map()")
converted find_and_alloc_map() over to use array_index_nospec() to sanitize
map type that user space passes on map creation, and this patch does an
analogous conversion for progs in find_prog_type() as it's also passed from
user space when loading progs as attr->prog_type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's possible for userspace to control attr->map_type. Sanitize it when
using it as an array index to prevent an out-of-bounds value being used
under speculation.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It looks weird that the stack_trace_filter file can be written by root
but shows that it does not have write permission by ll command.
Link: http://lkml.kernel.org/r/1518054113-28096-1-git-send-email-liuzhengyuan@kylinos.cn
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_graph_function and set_graph_notrace file mode should be 0644
instead of 0444 as they are writeable. Note, the mode appears to be ignored
regardless, but they should at least look sane.
Link: http://lkml.kernel.org/r/1409725869-4501-1-git-send-email-linx.z.chen@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chen LinX <linx.z.chen@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Even with the wait-loop fixed, there is a further issue with
kthread_parkme(). Upon hotplug, when we do takedown_cpu(),
smpboot_park_threads() can return before all those threads are in fact
blocked, due to the placement of the complete() in __kthread_parkme().
When that happens, sched_cpu_dying() -> migrate_tasks() can end up
migrating such a still runnable task onto another CPU.
Normally the task will have hit schedule() and gone to sleep by the
time we do kthread_unpark(), which will then do __kthread_bind() to
re-bind the task to the correct CPU.
However, when we loose the initial TASK_PARKED store to the concurrent
wakeup issue described previously, do the complete(), get migrated, it
is possible to either:
- observe kthread_unpark()'s clearing of SHOULD_PARK and terminate
the park and set TASK_RUNNING, or
- __kthread_bind()'s wait_task_inactive() to observe the competing
TASK_RUNNING store.
Either way the WARN() in __kthread_bind() will trigger and fail to
correctly set the CPU affinity.
Fix this by only issuing the complete() when the kthread has scheduled
out. This does away with all the icky 'still running' nonsense.
The alternative is to promote TASK_PARKED to a special state, this
guarantees wait_task_inactive() cannot observe a 'stale' TASK_RUNNING
and we'll end up doing the right thing, but this preserves the whole
icky business of potentially migating the still runnable thing.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gaurav reported a problem with __kthread_parkme() where a concurrent
try_to_wake_up() could result in competing stores to ->state which,
when the TASK_PARKED store got lost bad things would happen.
The comment near set_current_state() actually mentions this competing
store, but only mentions the case against TASK_RUNNING. This same
store, with different timing, can happen against a subsequent !RUNNING
store.
This normally is not a problem, because as per that same comment, the
!RUNNING state store is inside a condition based wait-loop:
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (!need_sleep)
break;
schedule();
}
__set_current_state(TASK_RUNNING);
If we loose the (first) TASK_UNINTERRUPTIBLE store to a previous
(concurrent) wakeup, the schedule() will NO-OP and we'll go around the
loop once more.
The problem here is that the TASK_PARKED store is not inside the
KTHREAD_SHOULD_PARK condition wait-loop.
There is a genuine issue with sleeps that do not have a condition;
this is addressed in a subsequent patch.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With commit:
31e77c93e4 ("sched/fair: Update blocked load when newly idle")
... we release the rq->lock when updating blocked load of idle CPUs.
This opens a time window during which another CPU can add a task to this
CPU's cfs_rq.
The check for newly added task of idle_balance() is not in the common path.
Move the out label to include this check.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 31e77c93e4 ("sched/fair: Update blocked load when newly idle")
Link: http://lkml.kernel.org/r/20180426103133.GA6953@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Matt reported the following deadlock:
CPU0 CPU1
schedule(.prev=migrate/0) <fault>
pick_next_task() ...
idle_balance() migrate_swap()
active_balance() stop_two_cpus()
spin_lock(stopper0->lock)
spin_lock(stopper1->lock)
ttwu(migrate/0)
smp_cond_load_acquire() -- waits for schedule()
stop_one_cpu(1)
spin_lock(stopper1->lock) -- waits for stopper lock
Fix this deadlock by taking the wakeups out from under stopper->lock.
This allows the active_balance() to queue the stop work and finish the
context switch, which in turn allows the wakeup from migrate_swap() to
observe the context and complete the wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180420095005.GH4064@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuoYdBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtFnAP9X4+AVDQH0VfsMLSc9D+rK6WmcRIhv
q8J2gNPv3anM+AD/SFXWGO4ihN+0KDw/TqmJxESNEybq47vTZ/s5lM6A4gQ=
=fQbj
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes in tracing:
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers"
* tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Do not warn on ENOMEM
tracing: Add field modifier parsing hist error for hist triggers
tracing: Add field parsing hist error for hist triggers
tracing: Restore proper field flag printing when displaying triggers
tracing: initcall: Ordered comparison of function pointers
tracing: Remove igrab() iput() call from uprobes.c
tracing: Fix bad use of igrab in trace_uprobe.c
When a redirect failure happens we release the buffers in-flight
without calling a sk_mem_uncharge(), the uncharge is called before
dropping the sock lock for the redirecte, however we missed updating
the ring start index. When no apply actions are in progress this
is OK because we uncharge the entire buffer before the redirect.
But, when we have apply logic running its possible that only a
portion of the buffer is being redirected. In this case we only
do memory accounting for the buffer slice being redirected and
expect to be able to loop over the BPF program again and/or if
a sock is closed uncharge the memory at sock destruct time.
With an invalid start index however the program logic looks at
the start pointer index, checks the length, and when seeing the
length is zero (from the initial release and failure to update
the pointer) aborts without uncharging/releasing the remaining
memory.
The fix for this is simply to update the start index. To avoid
fixing this error in two locations we do a small refactor and
remove one case where it is open-coded. Then fix it in the
single function.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When an error occurs during a redirect we have two cases that need
to be handled (i) we have a cork'ed buffer (ii) we have a normal
sendmsg buffer.
In the cork'ed buffer case we don't currently support recovering from
errors in a redirect action. So the buffer is released and the error
should _not_ be pushed back to the caller of sendmsg/sendpage. The
rationale here is the user will get an error that relates to old
data that may have been sent by some arbitrary thread on that sock.
Instead we simple consume the data and tell the user that the data
has been consumed. We may add proper error recovery in the future.
However, this patch fixes a bug where the bytes outstanding counter
sg_size was not zeroed. This could result in a case where if the user
has both a cork'ed action and apply action in progress we may
incorrectly call into the BPF program when the user expected an
old verdict to be applied via the apply action. I don't have a use
case where using apply and cork at the same time is valid but we
never explicitly reject it because it should work fine. This patch
ensures the sg_size is zeroed so we don't have this case.
In the normal sendmsg buffer case (no cork data) we also do not
zero sg_size. Again this can confuse the apply logic when the logic
calls into the BPF program when the BPF programmer expected the old
verdict to remain. So ensure we set sg_size to zero here as well. And
additionally to keep the psock state in-sync with the sk_msg_buff
release all the memory as well. Previously we did this before
returning to the user but this left a gap where psock and sk_msg_buff
states were out of sync which seems fragile. No additional overhead
is taken here except for a call to check the length and realize its
already been freed. This is in the error path as well so in my
opinion lets have robust code over optimized error paths.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the call to do_tcp_sendpage() fails to send the complete block
requested we either retry if only a partial send was completed or
abort if we receive a error less than or equal to zero. Before
returning though we must update the scatterlist length/offset to
account for any partial send completed.
Before this patch we did this at the end of the retry loop, but
this was buggy when used while applying a verdict to fewer bytes
than in the scatterlist. When the scatterlist length was being set
we forgot to account for the apply logic reducing the size variable.
So the result was we chopped off some bytes in the scatterlist without
doing proper cleanup on them. This results in a WARNING when the
sock is tore down because the bytes have previously been charged to
the socket but are never uncharged.
The simple fix is to simply do the accounting inside the retry loop
subtracting from the absolute scatterlist values rather than trying
to accumulate the totals and subtract at the end.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A number of places relies on list_empty(&cs->wd_list), however the
list_head does not get initialized. Do so upon registration, such that
thereafter it is possible to rely on list_empty() correctly reflecting
the list membership status.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org
Because of how the code flips between tsc-early and tsc clocksources
it might need to mark one or both unstable. The current code in
mark_tsc_unstable() only worked because previously it registered the
tsc clocksource once and then never touched it.
Since it now unregisters the tsc-early clocksource, it needs to know
if a clocksource got unregistered and the current cs->mult test
doesn't work for that. Instead use list_empty(&cs->list) to test for
registration.
Furthermore, since clocksource_mark_unstable() needs to place the cs
on the wd_list, it links the cs->list and cs->wd_list serialization.
It must not see a clocsource registered (!empty cs->list) but already
past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the
same lock.
Provided cs->list is initialized to empty, this then allows us to
unconditionally use clocksource_mark_unstable(), regardless of the
registration state.
Fixes: aa83c45762 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
- Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZGdS
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf"
* tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Fix display of wrong module .text address
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
If the user specifies an invalid field modifier for a hist trigger,
the current code correctly flags that as an error, but doesn't tell
the user what happened.
Fix this by invoking hist_err() with an appropriate message when
invalid modifiers are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
ERROR: Invalid field modifier: junkusecs
Last command: keys=pid:ts0=common_timestamp.junkusecs
Link: http://lkml.kernel.org/r/b043c59fa79acd06a5f14a1d44dee9e5a3cd1248.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the user specifies a nonexistent field for a hist trigger, the
current code correctly flags that as an error, but doesn't tell the
user what happened.
Fix this by invoking hist_err() with an appropriate message when
nonexistent fields are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
ERROR: Couldn't find field: pid
Last command: keys=pid:ts0=common_timestamp.usecs
Link: http://lkml.kernel.org/r/fdc8746969d16906120f162b99dd71c741e0b62c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The flag-printing code used when displaying hist triggers somehow got
dropped during refactoring of the inter-event patchset. This restores
it.
Below are a couple examples - in the first case, .usecs wasn't being
displayed properly for common_timestamps and the second illustrates
the same for other flags such as .execname.
Before:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
After:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid.execname:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
Link: http://lkml.kernel.org/r/492bab42ff21806600af98a8ea901af10efbee0c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuIMShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkrdAQDRrgIGcm4pRGrvPiGhp4FeQKUx3woM
LY10qMYo3St7zwEAn5oor/e/7KQaQSdKQ7QkL690QU2bTO6FXz4VwE1OcgM=
=OHJk
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
* tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing tab for hwlat_detector print format
selftests: ftrace: Add a testcase for multiple actions on trigger
selftests: ftrace: Fix trigger extended error testcase
kprobes: Fix random address output of blacklist file
tracing: Fix kernel crash while using empty filter with perf
tracing/x86: Update syscall trace events to handle new prefixed syscall func names
tracing: Add missing forward declaration
Caller of uprobe_register is required to keep the inode and containing
mount point referenced.
There was misuse of igrab() in uprobes.c and trace_uprobe.c. This is
because igrab() will not prevent umount of the containing mount point.
To fix this, we added path to struct trace_uprobe, which keeps the inode
and containing mount reference.
For uprobes.c, it is not necessary to call igrab() in uprobe_register(),
as the caller is required to keep the inode reference. The igrab() is
removed and comments on this requirement is added to uprobe_register().
Link: http://lkml.kernel.org/r/CAELBmZB2XX=qEOLAdvGG4cPx4GEntcSnWQquJLUK1ongRj35cA@mail.gmail.com
Link: http://lkml.kernel.org/r/20180423172135.4050588-2-songliubraving@fb.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As Miklos reported and suggested:
This pattern repeats two times in trace_uprobe.c and in
kernel/events/core.c as well:
ret = kern_path(filename, LOOKUP_FOLLOW, &path);
if (ret)
goto fail_address_parse;
inode = igrab(d_inode(path.dentry));
path_put(&path);
And it's wrong. You can only hold a reference to the inode if you
have an active ref to the superblock as well (which is normally
through path.mnt) or holding s_umount.
This way unmounting the containing filesystem while the tracepoint is
active will give you the "VFS: Busy inodes after unmount..." message
and a crash when the inode is finally put.
Solution: store path instead of inode.
This patch fixes two instances in trace_uprobe.c. struct path is added to
struct trace_uprobe to keep the inode and containing mount point
referenced.
Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com
Fixes: f3f096cfed ("tracing: Provide trace events interface for uprobes")
Fixes: 33ea4b2427 ("perf/core: Implement the 'perf_uprobe' PMU")
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.
CPU 3 CPU 2
idle
start sched_timer expires = 712171000000
queue->next = sched_timer
start rdmavt timer. expires = 712172915662
lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000 timerqueue_add(tmr)
hrtimer_set_expires(sched_timer, tick);
sched_timer->expires = 716767000000 <---- FAIL
if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer) queue->next = tmr;
lock(baseof(CPU3))
unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()
ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.
This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.
Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.
The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.
Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.
Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to clear the percpu metadata_dst that could otherwise carry
stale ip_tunnel_info, from William.
2) Fix that reduces the number of passes in x64 JIT with regards to
dead code sanitation to avoid risk of prog rejection, from Gianluca.
3) Several fixes of sockmap programs, besides others, fixing a double
page_put() in error path, missing refcount hold for pinned sockmap,
adding required -target bpf for clang in sample Makefile, from John.
4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.
5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
seen on older gcc-5, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's been missing for a while but no one is touching that up. Fix it.
Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com
CC: Ingo Molnar <mingo@kernel.org>
Cc:stable@vger.kernel.org
Fixes: 7b2c862501 ("tracing: Add NMI tracing in hwlat detector")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds