Commit Graph

9185 Commits

Author SHA1 Message Date
Lukas Bulwahn c12753d5fa s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS
Commit 0da6e5fd6c ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.

As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.

Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-05 18:56:23 -07:00
Linus Torvalds b115d85a95 Locking changes in v6.4:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
    primitive, which will be used in perf events ring-buffer code.
 
  - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation.
 
  - Misc cleanups/fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRUvUoRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hlIhAArP33rTKi+HAndQ3UHW3XtmHRxEEQTfiE
 wvIoN89h58QW4DGMeAV4ltafbIPQAkI233Aogwz903L0qbDV0Ro4OU3XJembRuWl
 LeOADKwYyypXdOa8XICuY9aIP7e1/h0DF3ySs7inLcwK9JCyAIxnsVHYej+hsRXA
 kZoXN98T3TR1C0V9UQy4SU3HI1lC3tsG3R9Ti9TnYUg3ygVXhRE9lOQ4kv9lFPVz
 BNuj2Blj7KNiVaY9kehrhO54THI7NmsCVZO44Rcl48I0KAcFulAmFcNlE7GnR8Nj
 thj38pU6XAFVHXG8MYjgE+Al+PnK48NtJxexCtHyGvGG4D2aLzRMnkolxAUCcVuK
 G+UBsQm3ybjYgHgt1zuN6ehcpT+5tULkDH8JA7vrgZYaVgxHzsUaHgYfCCWKnmUY
 mPR6aImEmYZwZVNLskhe0HT4mq244bp+VnWlnJ6LZK7t/itenvDhqnj7KTi4Bfej
 lTHplOTitV/8uCEW8V4pX+YTEenVsIQmTc/G3iIabXP/6HzLffA3q4vyW6vKIErE
 pqrpuFA0Z4GB+pU0mJXt7+I7zscDVthwI055jDyQBjA7IcdVGm2MjQ6xcNRW5FYN
 UynvaEMocue4ZO4WdFsd1ZBUd9VfoNzGQspBw46DhCL1MEQBYv36SKQNjej/9aRr
 ilVwqnOWI2s=
 =mM0A
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - Introduce local{,64}_try_cmpxchg() - a slightly more optimal
   primitive, which will be used in perf events ring-buffer code

 - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation

 - Misc cleanups/fixes

* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: Correct (cmp)xchg() instrumentation
  locking/x86: Define arch_try_cmpxchg_local()
  locking/arch: Wire up local_try_cmpxchg()
  locking/generic: Wire up local{,64}_try_cmpxchg()
  locking/atomic: Add generic try_cmpxchg{,64}_local() support
  locking/rwbase: Mitigate indefinite writer starvation
  locking/arch: Rename all internal __xchg() names to __arch_xchg()
2023-05-05 12:56:55 -07:00
Linus Torvalds 493804a689 RISC-V:
- ONE_REG interface to enable/disable SBI extensions
 - Zbb extension for Guest/VM
 - AIA CSR virtualization
 
 x86:
 - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can
   result in the root being freed even though the root is completely valid
   and can be reused as-is (with a TLB flush).
 
 s390:
 - A couple bugfixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRU198UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOeiwf+OdIcGxOlt9D/qNys/U+2kkhZK6WU
 1Jrwn+S5onea2LGyBucHk3V6O1rWck8aOqfRAmFBQc5s/gu8EySW5Ic17kqgqLwc
 MSr2c70qw3/6U2LoTeVHx21V4Jgf9iPOZu1LAXf26F0jSCAoWlACO9OQd0rJoDmA
 cpUtHSAFKxuPA/8Ix+SH4ddzKhCYEs4QejMLmQIgBWyaGShdi8dvaMoKyoceHN2w
 ntrhSaz+BbCCZKaFwtNCHVaigyioqmwTHjsmMFjzEN3N1ly1XZfN2E7vvT4j3v7l
 o55eMpJnu7+TVs5LEMvj25nuxgts6UzJnoALJAO2cDsHW5F3FvjO9HGjTg==
 =NHEm
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "This includes the 6.4 changes for RISC-V, and a few bugfix patches for
  other architectures. For x86, this closes a longstanding performance
  issue in the newer and (usually) more scalable page table management
  code.

  RISC-V:
   - ONE_REG interface to enable/disable SBI extensions
   - Zbb extension for Guest/VM
   - AIA CSR virtualization

  x86:
   - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
     can result in the root being freed even though the root is
     completely valid and can be reused as-is (with a TLB flush).

  s390:
   - A couple of bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix race in gmap_make_secure()
  KVM: s390: pv: fix asynchronous teardown for small VMs
  KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
  RISC-V: KVM: Virtualize per-HART AIA CSRs
  RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
  RISC-V: KVM: Add ONE_REG interface for AIA CSRs
  RISC-V: KVM: Implement subtype for CSR ONE_REG interface
  RISC-V: KVM: Initial skeletal support for AIA
  RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
  RISC-V: Detect AIA CSRs from ISA string
  RISC-V: Add AIA related CSR defines
  RISC-V: KVM: Allow Zbb extension for Guest/VM
  RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
  RISC-V: KVM: Alphabetize selects
  KVM: RISC-V: Retry fault if vma_lookup() results become invalid
2023-05-05 12:17:01 -07:00
Paolo Bonzini 7a8016d956 For 6.4
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmRT4cIACgkQuARItAMU
 6BPZ6xAA0T0AhPUuc4JyKH4p2ZFaH61+1YpGHlxxCyIF1gm4JMHS0i1CRii+o2Zh
 k3w76MafGau9ADXwrjJAh+C+WihwwgTtSyN2/amOn70K75iK7GGbT125c6VX6A1I
 6L6lFEO/3JURrhQE4TthgH6HUVyXBC4XobQqajWtxGgcq/QRkjtgdbLPPv9HuH23
 NgXZ85+lpPrak9U0Zzu2ez1O9VIlABWbTE6B6DgcyQshwqBZDOSFRTxxJ883XtqH
 7sRMmVJBkiF3HRqvDAmxI0eUOrR8YNtl1PN441iadmvfqG4IDbPtuJ0UtiyNagXT
 g7UYGvv7Qj2z4y2QhQSgLiIC0Zrl/T6Vw/7oXt0CVybhEMuAAeshWzHIl5aR5aKt
 7sY2ijUX290zwuACft9ZjDspUWyOPkvqym5UrldTj1ZaYV9w7iHNezFbXTnXOBh9
 vEiet5p3SCeQNymFKXy2R+8YJ6IIsH3Mxf6SYo2CQFNNjOzfUHwKMix/uArFdXF5
 CQD6jM9NXTiPIjwpXIJjyutJ6USWZhsMCneHtItzfWTa1YnBSZTwIWU1fB05Snk/
 BcDVfJ9Pq142N983SNXaBYIGzxpYPUHYZQmKvAzbeLHcaxrgLJM9/x8zcXIxc8Wa
 sEFoo5W8DCIJRqjk7dsLyLEvPJdoBZidg6sd0MwHRGX0kDRzHEo=
 =PPnV
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

For 6.4
2023-05-05 06:15:09 -04:00
Linus Torvalds 15fb96a35d - Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
   ioctl's behavior more similar to KSM's behavior.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZFLsxAAKCRDdBJ7gKXxA
 jl8yAQCqjstPsOULf9QN0z4bGAUhY+Wj4ERz1jbKSIuhFCJWiQEAgQvgRXObKjmi
 OtUB0Ek4CMDCQzbyIQ1Bhp3kxi6+Jgs=
 =AbyC
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more MM updates from Andrew Morton:

 - Some DAMON cleanups from Kefeng Wang

 - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
   ioctl's behavior more similar to KSM's behavior.

[ Andrew called these "final", but I suspect we'll have a series fixing
  up the fact that the last commit in the dmapools series in the
  previous pull seems to have unintentionally just reverted all the
  other commits in the same series..   - Linus ]

* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: hwpoison: coredump: support recovery from dump_user_range()
  mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
  mm/ksm: move disabling KSM from s390/gmap code to KSM code
  selftests/ksm: ksm_functional_tests: add prctl unmerge test
  mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
  mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
  mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: minor refactor of damon_pa_pageout()
2023-05-04 13:09:43 -07:00
Claudio Imbrenda c148dc8e2f KVM: s390: fix race in gmap_make_secure()
Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.

The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().

The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.

Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 214d9bbcd3 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230428092753.27913-2-imbrenda@linux.ibm.com>
2023-05-04 18:26:27 +02:00
Claudio Imbrenda 292a7d6fca KVM: s390: pv: fix asynchronous teardown for small VMs
On machines without the Destroy Secure Configuration Fast UVC, the
topmost level of page tables is set aside and freed asynchronously
as last step of the asynchronous teardown.

Each gmap has a host_to_guest radix tree mapping host (userspace)
addresses (with 1M granularity) to gmap segment table entries (pmds).

If a guest is smaller than 2GB, the topmost level of page tables is the
segment table (i.e. there are only 2 levels). Replacing it means that
the pointers in the host_to_guest mapping would become stale and cause
all kinds of nasty issues.

This patch fixes the issue by disallowing asynchronous teardown for
guests with only 2 levels of page tables. Userspace should (and already
does) try using the normal destroy if the asynchronous one fails.

Update s390_replace_asce so it refuses to replace segment type ASCEs.
This is still needed in case the normal destroy VM fails.

Fixes: fb491d5500 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230421085036.52511-2-imbrenda@linux.ibm.com>
2023-05-04 18:24:41 +02:00
David Hildenbrand 2c281f54f5 mm/ksm: move disabling KSM from s390/gmap code to KSM code
Let's factor out actual disabling of KSM.  The existing "mm->def_flags &=
~VM_MERGEABLE;" was essentially a NOP and can be dropped, because
def_flags should never include VM_MERGEABLE.  Note that we don't currently
prevent re-enabling KSM.

This should now be faster in case KSM was never enabled, because we only
conditionally iterate all VMAs.  Further, it certainly looks cleaner.

Link: https://lkml.kernel.org/r/20230422210156.33630-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Stefan Roesch <shr@devkernel.io>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-02 17:21:50 -07:00
Linus Torvalds c8c655c34e s390:
* More phys_to_virt conversions
 
 * Improvement of AP management for VSIE (nested virtualization)
 
 ARM64:
 
 * Numerous fixes for the pathological lock inversion issue that
   plagued KVM/arm64 since... forever.
 
 * New framework allowing SMCCC-compliant hypercalls to be forwarded
   to userspace, hopefully paving the way for some more features
   being moved to VMMs rather than be implemented in the kernel.
 
 * Large rework of the timer code to allow a VM-wide offset to be
   applied to both virtual and physical counters as well as a
   per-timer, per-vcpu offset that complements the global one.
   This last part allows the NV timer code to be implemented on
   top.
 
 * A small set of fixes to make sure that we don't change anything
   affecting the EL1&0 translation regime just after having having
   taken an exception to EL2 until we have executed a DSB. This
   ensures that speculative walks started in EL1&0 have completed.
 
 * The usual selftest fixes and improvements.
 
 KVM x86 changes for 6.4:
 
 * Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
   and by giving the guest control of CR0.WP when EPT is enabled on VMX
   (VMX-only because SVM doesn't support per-bit controls)
 
 * Add CR0/CR4 helpers to query single bits, and clean up related code
   where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
   as a bool
 
 * Move AMD_PSFD to cpufeatures.h and purge KVM's definition
 
 * Avoid unnecessary writes+flushes when the guest is only adding new PTEs
 
 * Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
   when emulating invalidations
 
 * Clean up the range-based flushing APIs
 
 * Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
   A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
   changed SPTE" overhead associated with writing the entire entry
 
 * Track the number of "tail" entries in a pte_list_desc to avoid having
   to walk (potentially) all descriptors during insertion and deletion,
   which gets quite expensive if the guest is spamming fork()
 
 * Disallow virtualizing legacy LBRs if architectural LBRs are available,
   the two are mutually exclusive in hardware
 
 * Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
   after KVM_RUN, similar to CPUID features
 
 * Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
 
 * Apply PMU filters to emulated events and add test coverage to the
   pmu_event_filter selftest
 
 x86 AMD:
 
 * Add support for virtual NMIs
 
 * Fixes for edge cases related to virtual interrupts
 
 x86 Intel:
 
 * Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
   not being reported due to userspace not opting in via prctl()
 
 * Fix a bug in emulation of ENCLS in compatibility mode
 
 * Allow emulation of NOP and PAUSE for L2
 
 * AMX selftests improvements
 
 * Misc cleanups
 
 MIPS:
 
 * Constify MIPS's internal callbacks (a leftover from the hardware enabling
   rework that landed in 6.3)
 
 Generic:
 
 * Drop unnecessary casts from "void *" throughout kvm_main.c
 
 * Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
   size by 8 bytes on 64-bit kernels by utilizing a padding hole
 
 Documentation:
 
 * Fix goof introduced by the conversion to rST
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
 Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
 WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
 huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
 XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
 j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
 =S2Hq
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "s390:

   - More phys_to_virt conversions

   - Improvement of AP management for VSIE (nested virtualization)

  ARM64:

   - Numerous fixes for the pathological lock inversion issue that
     plagued KVM/arm64 since... forever.

   - New framework allowing SMCCC-compliant hypercalls to be forwarded
     to userspace, hopefully paving the way for some more features being
     moved to VMMs rather than be implemented in the kernel.

   - Large rework of the timer code to allow a VM-wide offset to be
     applied to both virtual and physical counters as well as a
     per-timer, per-vcpu offset that complements the global one. This
     last part allows the NV timer code to be implemented on top.

   - A small set of fixes to make sure that we don't change anything
     affecting the EL1&0 translation regime just after having having
     taken an exception to EL2 until we have executed a DSB. This
     ensures that speculative walks started in EL1&0 have completed.

   - The usual selftest fixes and improvements.

  x86:

   - Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
     enabled, and by giving the guest control of CR0.WP when EPT is
     enabled on VMX (VMX-only because SVM doesn't support per-bit
     controls)

   - Add CR0/CR4 helpers to query single bits, and clean up related code
     where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
     return as a bool

   - Move AMD_PSFD to cpufeatures.h and purge KVM's definition

   - Avoid unnecessary writes+flushes when the guest is only adding new
     PTEs

   - Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
     optimizations when emulating invalidations

   - Clean up the range-based flushing APIs

   - Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
     single A/D bit using a LOCK AND instead of XCHG, and skip all of
     the "handle changed SPTE" overhead associated with writing the
     entire entry

   - Track the number of "tail" entries in a pte_list_desc to avoid
     having to walk (potentially) all descriptors during insertion and
     deletion, which gets quite expensive if the guest is spamming
     fork()

   - Disallow virtualizing legacy LBRs if architectural LBRs are
     available, the two are mutually exclusive in hardware

   - Disallow writes to immutable feature MSRs (notably
     PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features

   - Overhaul the vmx_pmu_caps selftest to better validate
     PERF_CAPABILITIES

   - Apply PMU filters to emulated events and add test coverage to the
     pmu_event_filter selftest

   - AMD SVM:
       - Add support for virtual NMIs
       - Fixes for edge cases related to virtual interrupts

   - Intel AMX:
       - Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
         XTILE_DATA is not being reported due to userspace not opting in
         via prctl()
       - Fix a bug in emulation of ENCLS in compatibility mode
       - Allow emulation of NOP and PAUSE for L2
       - AMX selftests improvements
       - Misc cleanups

  MIPS:

   - Constify MIPS's internal callbacks (a leftover from the hardware
     enabling rework that landed in 6.3)

  Generic:

   - Drop unnecessary casts from "void *" throughout kvm_main.c

   - Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
     struct size by 8 bytes on 64-bit kernels by utilizing a padding
     hole

  Documentation:

   - Fix goof introduced by the conversion to rST"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
  KVM: s390: pci: fix virtual-physical confusion on module unload/load
  KVM: s390: vsie: clarifications on setting the APCB
  KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
  KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
  KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
  KVM: selftests: Test the PMU event "Instructions retired"
  KVM: selftests: Copy full counter values from guest in PMU event filter test
  KVM: selftests: Use error codes to signal errors in PMU event filter test
  KVM: selftests: Print detailed info in PMU event filter asserts
  KVM: selftests: Add helpers for PMC asserts in PMU event filter test
  KVM: selftests: Add a common helper for the PMU event filter guest code
  KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
  KVM: arm64: vhe: Drop extra isb() on guest exit
  KVM: arm64: vhe: Synchronise with page table walker on MMU update
  KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
  KVM: arm64: nvhe: Synchronise with page table walker on TLBI
  KVM: arm64: Handle 32bit CNTPCTSS traps
  KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
  KVM: arm64: vgic: Don't acquire its_lock before config_lock
  KVM: selftests: Add test to verify KVM's supported XCR0
  ...
2023-05-01 12:06:20 -07:00
Linus Torvalds 10de638d8e s390 updates for the 6.4 merge window
- Add support for stackleak feature. Also allow specifying
   architecture-specific stackleak poison function to enable faster
   implementation. On s390, the mvc-based implementation helps decrease
   typical overhead from a factor of 3 to just 25%
 
 - Convert all assembler files to use SYM* style macros, deprecating the
   ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS
 
 - Improve KASLR to also randomize module and special amode31 code
   base load addresses
 
 - Rework decompressor memory tracking to support memory holes and improve
   error handling
 
 - Add support for protected virtualization AP binding
 
 - Add support for set_direct_map() calls
 
 - Implement set_memory_rox() and noexec module_alloc()
 
 - Remove obsolete overriding of mem*() functions for KASAN
 
 - Rework kexec/kdump to avoid using nodat_stack to call purgatory
 
 - Convert the rest of the s390 code to use flexible-array member instead
   of a zero-length array
 
 - Clean up uaccess inline asm
 
 - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE
 
 - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
   DEBUG_FORCE_FUNCTION_ALIGN_64B
 
 - Resolve last_break in userspace fault reports
 
 - Simplify one-level sysctl registration
 
 - Clean up branch prediction handling
 
 - Rework CPU counter facility to retrieve available counter sets just
   once
 
 - Other various small fixes and improvements all over the code
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmRM8pwACgkQjYWKoQLX
 FBjV1AgAlvAhu1XkwOdwqdT4GqE8pcN4XXzydog1MYihrSO2PdgWAxpEW7o2QURN
 W+3xa6RIqt7nX2YBiwTanMZ12TYaFY7noGl3eUpD/NhueprweVirVl7VZUEuRoW/
 j0mbx77xsVzLfuDFxkpVwE6/j+tTO78kLyjUHwcN9rFVUaL7/orJneDJf+V8fZG0
 sHLOv0aljF7Jr2IIkw82lCmW/vdk7k0dACWMXK2kj1H3dIK34B9X4AdKDDf/WKXk
 /OSElBeZ93tSGEfNDRIda6iR52xocROaRnQAaDtargKFl9VO0/dN9ADxO+SLNHjN
 pFE/9VD6xT/xo4IuZZh/Z3TcYfiLvA==
 =Geqx
 -----END PGP SIGNATURE-----

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for stackleak feature. Also allow specifying
   architecture-specific stackleak poison function to enable faster
   implementation. On s390, the mvc-based implementation helps decrease
   typical overhead from a factor of 3 to just 25%

 - Convert all assembler files to use SYM* style macros, deprecating the
   ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

 - Improve KASLR to also randomize module and special amode31 code base
   load addresses

 - Rework decompressor memory tracking to support memory holes and
   improve error handling

 - Add support for protected virtualization AP binding

 - Add support for set_direct_map() calls

 - Implement set_memory_rox() and noexec module_alloc()

 - Remove obsolete overriding of mem*() functions for KASAN

 - Rework kexec/kdump to avoid using nodat_stack to call purgatory

 - Convert the rest of the s390 code to use flexible-array member
   instead of a zero-length array

 - Clean up uaccess inline asm

 - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

 - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
   DEBUG_FORCE_FUNCTION_ALIGN_64B

 - Resolve last_break in userspace fault reports

 - Simplify one-level sysctl registration

 - Clean up branch prediction handling

 - Rework CPU counter facility to retrieve available counter sets just
   once

 - Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
  s390/stackleak: provide fast __stackleak_poison() implementation
  stackleak: allow to specify arch specific stackleak poison function
  s390: select ARCH_USE_SYM_ANNOTATIONS
  s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
  s390: wire up memfd_secret system call
  s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
  s390/mm: use BIT macro to generate SET_MEMORY bit masks
  s390/relocate_kernel: adjust indentation
  s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
  s390/entry: use SYM* macros instead of ENTRY(), etc.
  s390/purgatory: use SYM* macros instead of ENTRY(), etc.
  s390/kprobes: use SYM* macros instead of ENTRY(), etc.
  s390/reipl: use SYM* macros instead of ENTRY(), etc.
  s390/head64: use SYM* macros instead of ENTRY(), etc.
  s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
  s390/mcount: use SYM* macros instead of ENTRY(), etc.
  s390/crc32le: use SYM* macros instead of ENTRY(), etc.
  s390/crc32be: use SYM* macros instead of ENTRY(), etc.
  s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
  s390/amode31: use SYM* macros instead of ENTRY(), etc.
  ...
2023-04-30 11:43:31 -07:00
Andrzej Hajda 068550631f locking/arch: Rename all internal __xchg() names to __arch_xchg()
Decrease the probability of this internal facility to be used by
driver code.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv]
Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-29 09:08:44 +02:00
Linus Torvalds f20730efbd SMP cross-CPU function-call updates for v6.4:
- Remove diagnostics and adjust config for CSD lock diagnostics
 
  - Add a generic IPI-sending tracepoint, as currently there's no easy
    way to instrument IPI origins: it's arch dependent and for some
    major architectures it's not even consistently available.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK438RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jJ5Q/5AZ0HGpyqwdFK8GmGznyu5qjP5HwV9pPq
 gZQScqSy4tZEeza4TFMi83CoXSg9uJ7GlYJqqQMKm78LGEPomnZtXXC7oWvTA9M5
 M/jAvzytmvZloSCXV6kK7jzSejMHhag97J/BjTYhZYQpJ9T+hNC87XO6J6COsKr9
 lPIYqkFrIkQNr6B0U11AQfFejRYP1ics2fnbnZL86G/zZAc6x8EveM3KgSer2iHl
 KbrO+xcYyGY8Ef9P2F72HhEGFfM3WslpT1yzqR3sm4Y+fuMG0oW3qOQuMJx0ZhxT
 AloterY0uo6gJwI0P9k/K4klWgz81Tf/zLb0eBAtY2uJV9Fo3YhPHuZC7jGPGAy3
 JusW2yNYqc8erHVEMAKDUsl/1KN4TE2uKlkZy98wno+KOoMufK5MA2e2kPPqXvUi
 Jk9RvFolnWUsexaPmCftti0OCv3YFiviVAJ/t0pchfmvvJA2da0VC9hzmEXpLJVF
 25nBTV/1uAOrWvOpCyo3ElrC2CkQVkFmK5rXMDdvf6ib0Nid4vFcCkCSLVfu+ePB
 11mi7QYro+CcnOug1K+yKogUDmsZgV/u1kUwgQzTIpZ05Kkb49gUiXw9L2RGcBJh
 yoDoiI66KPR7PWQ2qBdQoXug4zfEEtWG0O9HNLB0FFRC3hu7I+HHyiUkBWs9jasK
 PA5+V7HcQRk=
 =Wp7f
 -----END PGP SIGNATURE-----

Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP cross-CPU function-call updates from Ingo Molnar:

 - Remove diagnostics and adjust config for CSD lock diagnostics

 - Add a generic IPI-sending tracepoint, as currently there's no easy
   way to instrument IPI origins: it's arch dependent and for some major
   architectures it's not even consistently available.

* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  trace,smp: Trace all smp_function_call*() invocations
  trace: Add trace_ipi_send_cpu()
  sched, smp: Trace smp callback causing an IPI
  smp: reword smp call IPI comment
  treewide: Trace IPIs sent via smp_send_reschedule()
  irq_work: Trace self-IPIs sent via arch_irq_work_raise()
  smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
  sched, smp: Trace IPIs sent via send_call_function_single_ipi()
  trace: Add trace_ipi_send_cpumask()
  kernel/smp: Make csdlock_debug= resettable
  locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
  locking/csd_lock: Remove added data from CSD lock debugging
  locking/csd_lock: Add Kconfig option for csd_debug default
2023-04-28 15:03:43 -07:00
Linus Torvalds 2aff7c706c Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
    this inconsistently follow this new, common convention, and fix all the fallout
    that objtool can now detect statically.
 
  - Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
    split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
 
  - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
 
  - Generate ORC data for __pfx code
 
  - Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
 
  - Misc improvements & fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK1x0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ghxQ/+IkCynMYtdF5OG9YwbcGJqsPSfOPMEcEM
 pUSFYg+gGPBDT/fJfcVSqvUtdnWbLC2kXt9yiswXz3X3J2nmNkBk5YKQftsNDcul
 TmKeqIIAK51XTncpegKH0EGnOX63oZ9Vxa8CTPdDlb+YF23Km2FoudGRI9F5qbUd
 LoraXqGYeiaeySkGyWmZVl6Uc8dIxnMkTN3H/oI9aB6TOrsi059hAtFcSaFfyemP
 c4LqXXCH7k2baiQt+qaLZ8cuZVG/+K5r2N2cmjO5kmJc6ynIaFnfMe4XxZLjp5LT
 /PulYI15bXkvSARKx5CRh/CDHMOx5Blw+ASO0RhWbdy0WH4ZhhcaVF5AeIpPW86a
 1LBcz97rMp72WmvKgrJeVO1r9+ll4SI6/YKGJRsxsCMdP3hgFpqntXyVjTFNdTM1
 0gH6H5v55x06vJHvhtTk8SR3PfMTEM2fRU5jXEOrGowoGifx+wNUwORiwj6LE3KQ
 SKUdT19RNzoW3VkFxhgk65ThK1S7YsJUKRoac3YdhttpqqqtFV//erenrZoR4k/p
 vzvKy68EQ7RCNyD5wNWNFe0YjeJl5G8gQ8bUm4Xmab7djjgz+pn4WpQB8yYKJLAo
 x9dqQ+6eUbw3Hcgk6qQ9E+r/svbulnAL0AeALAWK/91DwnZ2mCzKroFkLN7napKi
 fRho4CqzrtM=
 =NwEV
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...
2023-04-28 14:02:54 -07:00
Linus Torvalds 7fa8a8ee94 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
 
 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
 
 - zsmalloc performance improvements from Sergey Senozhatsky.
 
 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.
 
 - VFS rationalizations from Christoph Hellwig:
 
   - removal of most of the callers of write_one_page().
 
   - make __filemap_get_folio()'s return value more useful
 
 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing.  Use `mount -o noswap'.
 
 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.
 
 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).
 
 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.
 
 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
   than exclusive, and has fixed a bunch of errors which were caused by its
   unintuitive meaning.
 
 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.
 
 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.
 
 - Cleanups to do_fault_around() by Lorenzo Stoakes.
 
 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.
 
 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.
 
 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.
 
 - Lorenzo has also contributed further cleanups of vma_merge().
 
 - Chaitanya Prakash provides some fixes to the mmap selftesting code.
 
 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.
 
 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.
 
 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.
 
 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.
 
 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.
 
 - Yosry Ahmed has improved the performance of memcg statistics flushing.
 
 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.
 
 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.
 
 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.
 
 - Pankaj Raghav has made page_endio() unneeded and has removed it.
 
 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.
 
 - Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
 
 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.
 
 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.
 
 - Peter Xu fixes a few issues with uffd-wp at fork() time.
 
 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
 jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
 eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
 =J+Dj
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
   switching from a user process to a kernel thread.

 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
   Raghav.

 - zsmalloc performance improvements from Sergey Senozhatsky.

 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.

 - VFS rationalizations from Christoph Hellwig:
     - removal of most of the callers of write_one_page()
     - make __filemap_get_folio()'s return value more useful

 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing. Use `mount -o noswap'.

 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.

 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).

 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.

 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
   rather than exclusive, and has fixed a bunch of errors which were
   caused by its unintuitive meaning.

 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.

 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.

 - Cleanups to do_fault_around() by Lorenzo Stoakes.

 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.

 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.

 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.

 - Lorenzo has also contributed further cleanups of vma_merge().

 - Chaitanya Prakash provides some fixes to the mmap selftesting code.

 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.

 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.

 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.

 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.

 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.

 - Yosry Ahmed has improved the performance of memcg statistics
   flushing.

 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.

 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.

 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.

 - Pankaj Raghav has made page_endio() unneeded and has removed it.

 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.

 - Yosry Ahmed has fixed an issue around memcg's page recalim
   accounting.

 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.

 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.

 - Peter Xu fixes a few issues with uffd-wp at fork() time.

 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.

* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
  mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
  shmem: restrict noswap option to initial user namespace
  mm/khugepaged: fix conflicting mods to collapse_file()
  sparse: remove unnecessary 0 values from rc
  mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
  hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
  maple_tree: fix allocation in mas_sparse_area()
  mm: do not increment pgfault stats when page fault handler retries
  zsmalloc: allow only one active pool compaction context
  selftests/mm: add new selftests for KSM
  mm: add new KSM process and sysfs knobs
  mm: add new api to enable ksm per process
  mm: shrinkers: fix debugfs file permissions
  mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
  migrate_pages_batch: fix statistics for longterm pin retry
  userfaultfd: use helper function range_in_vma()
  lib/show_mem.c: use for_each_populated_zone() simplify code
  mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
  fs/buffer: convert create_page_buffers to folio_create_buffers
  fs/buffer: add folio_create_empty_buffers helper
  ...
2023-04-27 19:42:02 -07:00
Linus Torvalds b6a7828502 modules-6.4-rc1
The summary of the changes for this pull requests is:
 
  * Song Liu's new struct module_memory replacement
  * Nick Alcock's MODULE_LICENSE() removal for non-modules
  * My cleanups and enhancements to reduce the areas where we vmalloc
    module memory for duplicates, and the respective debug code which
    proves the remaining vmalloc pressure comes from userspace.
 
 Most of the changes have been in linux-next for quite some time except
 the minor fixes I made to check if a module was already loaded
 prior to allocating the final module memory with vmalloc and the
 respective debug code it introduces to help clarify the issue. Although
 the functional change is small it is rather safe as it can only *help*
 reduce vmalloc space for duplicates and is confirmed to fix a bootup
 issue with over 400 CPUs with KASAN enabled. I don't expect stable
 kernels to pick up that fix as the cleanups would have also had to have
 been picked up. Folks on larger CPU systems with modules will want to
 just upgrade if vmalloc space has been an issue on bootup.
 
 Given the size of this request, here's some more elaborate details
 on this pull request.
 
 The functional change change in this pull request is the very first
 patch from Song Liu which replaces the struct module_layout with a new
 struct module memory. The old data structure tried to put together all
 types of supported module memory types in one data structure, the new
 one abstracts the differences in memory types in a module to allow each
 one to provide their own set of details. This paves the way in the
 future so we can deal with them in a cleaner way. If you look at changes
 they also provide a nice cleanup of how we handle these different memory
 areas in a module. This change has been in linux-next since before the
 merge window opened for v6.3 so to provide more than a full kernel cycle
 of testing. It's a good thing as quite a bit of fixes have been found
 for it.
 
 Jason Baron then made dynamic debug a first class citizen module user by
 using module notifier callbacks to allocate / remove module specific
 dynamic debug information.
 
 Nick Alcock has done quite a bit of work cross-tree to remove module
 license tags from things which cannot possibly be module at my request
 so to:
 
   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area
      is active with no clear solution in sight.
 
   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags
 
 In so far as a) is concerned, although module license tags are a no-op
 for non-modules, tools which would want create a mapping of possible
 modules can only rely on the module license tag after the commit
 8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
 or tristate.conf").  Nick has been working on this *for years* and
 AFAICT I was the only one to suggest two alternatives to this approach
 for tooling. The complexity in one of my suggested approaches lies in
 that we'd need a possible-obj-m and a could-be-module which would check
 if the object being built is part of any kconfig build which could ever
 lead to it being part of a module, and if so define a new define
 -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
 suggested would be to have a tristate in kconfig imply the same new
 -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
 mapping to modules always, and I don't think that's the case today. I am
 not aware of Nick or anyone exploring either of these options. Quite
 recently Josh Poimboeuf has pointed out that live patching, kprobes and
 BPF would benefit from resolving some part of the disambiguation as
 well but for other reasons. The function granularity KASLR (fgkaslr)
 patches were mentioned but Joe Lawrence has clarified this effort has
 been dropped with no clear solution in sight [1].
 
 In the meantime removing module license tags from code which could never
 be modules is welcomed for both objectives mentioned above. Some
 developers have also welcomed these changes as it has helped clarify
 when a module was never possible and they forgot to clean this up,
 and so you'll see quite a bit of Nick's patches in other pull
 requests for this merge window. I just picked up the stragglers after
 rc3. LWN has good coverage on the motivation behind this work [2] and
 the typical cross-tree issues he ran into along the way. The only
 concrete blocker issue he ran into was that we should not remove the
 MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
 they can never be modules. Nick ended up giving up on his efforts due
 to having to do this vetting and backlash he ran into from folks who
 really did *not understand* the core of the issue nor were providing
 any alternative / guidance. I've gone through his changes and dropped
 the patches which dropped the module license tags where an SPDX
 license tag was missing, it only consisted of 11 drivers.  To see
 if a pull request deals with a file which lacks SPDX tags you
 can just use:
 
   ./scripts/spdxcheck.py -f \
 	$(git diff --name-only commid-id | xargs echo)
 
 You'll see a core module file in this pull request for the above,
 but that's not related to his changes. WE just need to add the SPDX
 license tag for the kernel/module/kmod.c file in the future but
 it demonstrates the effectiveness of the script.
 
 Most of Nick's changes were spread out through different trees,
 and I just picked up the slack after rc3 for the last kernel was out.
 Those changes have been in linux-next for over two weeks.
 
 The cleanups, debug code I added and final fix I added for modules
 were motivated by David Hildenbrand's report of boot failing on
 a systems with over 400 CPUs when KASAN was enabled due to running
 out of virtual memory space. Although the functional change only
 consists of 3 lines in the patch "module: avoid allocation if module is
 already present and ready", proving that this was the best we can
 do on the modules side took quite a bit of effort and new debug code.
 
 The initial cleanups I did on the modules side of things has been
 in linux-next since around rc3 of the last kernel, the actual final
 fix for and debug code however have only been in linux-next for about a
 week or so but I think it is worth getting that code in for this merge
 window as it does help fix / prove / evaluate the issues reported
 with larger number of CPUs. Userspace is not yet fixed as it is taking
 a bit of time for folks to understand the crux of the issue and find a
 proper resolution. Worst come to worst, I have a kludge-of-concept [3]
 of how to make kernel_read*() calls for modules unique / converge them,
 but I'm currently inclined to just see if userspace can fix this
 instead.
 
 [0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
 [1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
 [2] https://lwn.net/Articles/927569/
 [3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRG4m0SHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinQ2oP/0xlvKwJg6Ey8fHZF0qv8VOskE80zoLF
 hMazU3xfqLA+1TQvouW1YBxt3jwS3t1Ehs+NrV+nY9Yzcm0MzRX/n3fASJVe7nRr
 oqWWQU+voYl5Pw1xsfdp6C8IXpBQorpYby3Vp0MAMoZyl2W2YrNo36NV488wM9KC
 jD4HF5Z6xpnPSZTRR7AgW9mo7FdAtxPeKJ76Bch7lH8U6omT7n36WqTw+5B1eAYU
 YTOvrjRs294oqmWE+LeebyiOOXhH/yEYx4JNQgCwPdxwnRiGJWKsk5va0hRApqF/
 WW8dIqdEnjsa84lCuxnmWgbcPK8cgmlO0rT0DyneACCldNlldCW1LJ0HOwLk9pea
 p3JFAsBL7TKue4Tos6I7/4rx1ufyBGGIigqw9/VX5g0Iif+3BhWnqKRfz+p9wiMa
 Fl7cU6u7yC68CHu1HBSisK16cYMCPeOnTSd89upHj8JU/t74O6k/ARvjrQ9qmNUt
 c5U+OY+WpNJ1nXQydhY/yIDhFdYg8SSpNuIO90r4L8/8jRQYXNG80FDd1UtvVDuy
 eq0r2yZ8C0XHSlOT9QHaua/tWV/aaKtyC/c0hDRrigfUrq8UOlGujMXbUnrmrWJI
 tLJLAc7ePWAAoZXGSHrt0U27l029GzLwRdKqJ6kkDANVnTeOdV+mmBg9zGh3/Mp6
 agiwdHUMVN7X
 =56WK
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull module updates from Luis Chamberlain:
 "The summary of the changes for this pull requests is:

   - Song Liu's new struct module_memory replacement

   - Nick Alcock's MODULE_LICENSE() removal for non-modules

   - My cleanups and enhancements to reduce the areas where we vmalloc
     module memory for duplicates, and the respective debug code which
     proves the remaining vmalloc pressure comes from userspace.

  Most of the changes have been in linux-next for quite some time except
  the minor fixes I made to check if a module was already loaded prior
  to allocating the final module memory with vmalloc and the respective
  debug code it introduces to help clarify the issue. Although the
  functional change is small it is rather safe as it can only *help*
  reduce vmalloc space for duplicates and is confirmed to fix a bootup
  issue with over 400 CPUs with KASAN enabled. I don't expect stable
  kernels to pick up that fix as the cleanups would have also had to
  have been picked up. Folks on larger CPU systems with modules will
  want to just upgrade if vmalloc space has been an issue on bootup.

  Given the size of this request, here's some more elaborate details:

  The functional change change in this pull request is the very first
  patch from Song Liu which replaces the 'struct module_layout' with a
  new 'struct module_memory'. The old data structure tried to put
  together all types of supported module memory types in one data
  structure, the new one abstracts the differences in memory types in a
  module to allow each one to provide their own set of details. This
  paves the way in the future so we can deal with them in a cleaner way.
  If you look at changes they also provide a nice cleanup of how we
  handle these different memory areas in a module. This change has been
  in linux-next since before the merge window opened for v6.3 so to
  provide more than a full kernel cycle of testing. It's a good thing as
  quite a bit of fixes have been found for it.

  Jason Baron then made dynamic debug a first class citizen module user
  by using module notifier callbacks to allocate / remove module
  specific dynamic debug information.

  Nick Alcock has done quite a bit of work cross-tree to remove module
  license tags from things which cannot possibly be module at my request
  so to:

   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area is
      active with no clear solution in sight.

   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags

  In so far as a) is concerned, although module license tags are a no-op
  for non-modules, tools which would want create a mapping of possible
  modules can only rely on the module license tag after the commit
  8b41fc4454 ("kbuild: create modules.builtin without
  Makefile.modbuiltin or tristate.conf").

  Nick has been working on this *for years* and AFAICT I was the only
  one to suggest two alternatives to this approach for tooling. The
  complexity in one of my suggested approaches lies in that we'd need a
  possible-obj-m and a could-be-module which would check if the object
  being built is part of any kconfig build which could ever lead to it
  being part of a module, and if so define a new define
  -DPOSSIBLE_MODULE [0].

  A more obvious yet theoretical approach I've suggested would be to
  have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
  well but that means getting kconfig symbol names mapping to modules
  always, and I don't think that's the case today. I am not aware of
  Nick or anyone exploring either of these options. Quite recently Josh
  Poimboeuf has pointed out that live patching, kprobes and BPF would
  benefit from resolving some part of the disambiguation as well but for
  other reasons. The function granularity KASLR (fgkaslr) patches were
  mentioned but Joe Lawrence has clarified this effort has been dropped
  with no clear solution in sight [1].

  In the meantime removing module license tags from code which could
  never be modules is welcomed for both objectives mentioned above. Some
  developers have also welcomed these changes as it has helped clarify
  when a module was never possible and they forgot to clean this up, and
  so you'll see quite a bit of Nick's patches in other pull requests for
  this merge window. I just picked up the stragglers after rc3. LWN has
  good coverage on the motivation behind this work [2] and the typical
  cross-tree issues he ran into along the way. The only concrete blocker
  issue he ran into was that we should not remove the MODULE_LICENSE()
  tags from files which have no SPDX tags yet, even if they can never be
  modules. Nick ended up giving up on his efforts due to having to do
  this vetting and backlash he ran into from folks who really did *not
  understand* the core of the issue nor were providing any alternative /
  guidance. I've gone through his changes and dropped the patches which
  dropped the module license tags where an SPDX license tag was missing,
  it only consisted of 11 drivers. To see if a pull request deals with a
  file which lacks SPDX tags you can just use:

    ./scripts/spdxcheck.py -f \
	$(git diff --name-only commid-id | xargs echo)

  You'll see a core module file in this pull request for the above, but
  that's not related to his changes. WE just need to add the SPDX
  license tag for the kernel/module/kmod.c file in the future but it
  demonstrates the effectiveness of the script.

  Most of Nick's changes were spread out through different trees, and I
  just picked up the slack after rc3 for the last kernel was out. Those
  changes have been in linux-next for over two weeks.

  The cleanups, debug code I added and final fix I added for modules
  were motivated by David Hildenbrand's report of boot failing on a
  systems with over 400 CPUs when KASAN was enabled due to running out
  of virtual memory space. Although the functional change only consists
  of 3 lines in the patch "module: avoid allocation if module is already
  present and ready", proving that this was the best we can do on the
  modules side took quite a bit of effort and new debug code.

  The initial cleanups I did on the modules side of things has been in
  linux-next since around rc3 of the last kernel, the actual final fix
  for and debug code however have only been in linux-next for about a
  week or so but I think it is worth getting that code in for this merge
  window as it does help fix / prove / evaluate the issues reported with
  larger number of CPUs. Userspace is not yet fixed as it is taking a
  bit of time for folks to understand the crux of the issue and find a
  proper resolution. Worst come to worst, I have a kludge-of-concept [3]
  of how to make kernel_read*() calls for modules unique / converge
  them, but I'm currently inclined to just see if userspace can fix this
  instead"

Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]

* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
  module: add debugging auto-load duplicate module support
  module: stats: fix invalid_mod_bytes typo
  module: remove use of uninitialized variable len
  module: fix building stats for 32-bit targets
  module: stats: include uapi/linux/module.h
  module: avoid allocation if module is already present and ready
  module: add debug stats to help identify memory pressure
  module: extract patient module check into helper
  modules/kmod: replace implementation with a semaphore
  Change DEFINE_SEMAPHORE() to take a number argument
  module: fix kmemleak annotations for non init ELF sections
  module: Ignore L0 and rename is_arm_mapping_symbol()
  module: Move is_arm_mapping_symbol() to module_symbol.h
  module: Sync code of is_arm_mapping_symbol()
  scripts/gdb: use mem instead of core_layout to get the module address
  interconnect: remove module-related code
  interconnect: remove MODULE_LICENSE in non-modules
  zswap: remove MODULE_LICENSE in non-modules
  zpool: remove MODULE_LICENSE in non-modules
  x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
  ...
2023-04-27 16:36:55 -07:00
Linus Torvalds 556eb8b791 Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1.
 
 Once again, a busy development cycle, with lots of changes happening in
 the driver core in the quest to be able to move "struct bus" and "struct
 class" into read-only memory, a task now complete with these changes.
 
 This will make the future rust interactions with the driver core more
 "provably correct" as well as providing more obvious lifetime rules for
 all busses and classes in the kernel.
 
 The changes required for this did touch many individual classes and
 busses as many callbacks were changed to take const * parameters
 instead.  All of these changes have been submitted to the various
 subsystem maintainers, giving them plenty of time to review, and most of
 them actually did so.
 
 Other than those changes, included in here are a small set of other
 things:
   - kobject logging improvements
   - cacheinfo improvements and updates
   - obligatory fw_devlink updates and fixes
   - documentation updates
   - device property cleanups and const * changes
   - firwmare loader dependency fixes.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
 LEGadNS38k5fs+73UaxV
 =7K4B
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
2023-04-27 11:53:57 -07:00
Linus Torvalds 6e98b09da9 Networking changes for 6.4.
Core
 ----
 
  - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
    default value allows for better BIG TCP performances.
 
  - Reduce compound page head access for zero-copy data transfers.
 
  - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
 
  - Threaded NAPI improvements, adding defer skb free support and unneeded
    softirq avoidance.
 
  - Address dst_entry reference count scalability issues, via false
    sharing avoidance and optimize refcount tracking.
 
  - Add lockless accesses annotation to sk_err[_soft].
 
  - Optimize again the skb struct layout.
 
  - Extends the skb drop reasons to make it usable by multiple
    subsystems.
 
  - Better const qualifier awareness for socket casts.
 
 BPF
 ---
 
  - Add skb and XDP typed dynptrs which allow BPF programs for more
    ergonomic and less brittle iteration through data and variable-sized
    accesses.
 
  - Add a new BPF netfilter program type and minimal support to hook
    BPF programs to netfilter hooks such as prerouting or forward.
 
  - Add more precise memory usage reporting for all BPF map types.
 
  - Adds support for using {FOU,GUE} encap with an ipip device operating
    in collect_md mode and add a set of BPF kfuncs for controlling encap
    params.
 
  - Allow BPF programs to detect at load time whether a particular kfunc
    exists or not, and also add support for this in light skeleton.
 
  - Bigger batch of BPF verifier improvements to prepare for upcoming BPF
    open-coded iterators allowing for less restrictive looping capabilities.
 
  - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
    programs to NULL-check before passing such pointers into kfunc.
 
  - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
    local storage maps.
 
  - Enable RCU semantics for task BPF kptrs and allow referenced kptr
    tasks to be stored in BPF maps.
 
  - Add support for refcounted local kptrs to the verifier for allowing
    shared ownership, useful for adding a node to both the BPF list and
    rbtree.
 
  - Add BPF verifier support for ST instructions in convert_ctx_access()
    which will help new -mcpu=v4 clang flag to start emitting them.
 
  - Add ARM32 USDT support to libbpf.
 
  - Improve bpftool's visual program dump which produces the control
    flow graph in a DOT format by adding C source inline annotations.
 
 Protocols
 ---------
 
  - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
    indicates the provenance of the IP address.
 
  - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
 
  - Add the handshake upcall mechanism, allowing the user-space
    to implement generic TLS handshake on kernel's behalf.
 
  - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
    resilience to nodes failures.
 
  - SCTP: add support for Fair Capacity and Weighted Fair Queueing
    schedulers.
 
  - MPTCP: delay first subflow allocation up to its first usage. This
    will allow for later better LSM interaction.
 
  - xfrm: Remove inner/outer modes from input/output path. These are
    not needed anymore.
 
  - WiFi:
    - reduced neighbor report (RNR) handling for AP mode
    - HW timestamping support
    - support for randomized auth/deauth TA for PASN privacy
    - per-link debugfs for multi-link
    - TC offload support for mac80211 drivers
    - mac80211 mesh fast-xmit and fast-rx support
    - enable Wi-Fi 7 (EHT) mesh support
 
 Netfilter
 ---------
 
  - Add nf_tables 'brouting' support, to force a packet to be routed
    instead of being bridged.
 
  - Update bridge netfilter and ovs conntrack helpers to handle
    IPv6 Jumbo packets properly, i.e. fetch the packet length
    from hop-by-hop extension header. This is needed for BIT TCP
    support.
 
  - The iptables 32bit compat interface isn't compiled in by default
    anymore.
 
  - Move ip(6)tables builtin icmp matches to the udptcp one.
    This has the advantage that icmp/icmpv6 match doesn't load the
    iptables/ip6tables modules anymore when iptables-nft is used.
 
  - Extended netlink error report for netdevice in flowtables and
    netdev/chains. Allow for incrementally add/delete devices to netdev
    basechain. Allow to create netdev chain without device.
 
 Driver API
 ----------
 
  - Remove redundant Device Control Error Reporting Enable, as PCI core
    has already error reporting enabled at enumeration time.
 
  - Move Multicast DB netlink handlers to core, allowing devices other
    then bridge to use them.
 
  - Allow the page_pool to directly recycle the pages from safely
    localized NAPI.
 
  - Implement lockless TX queue stop/wake combo macros, allowing for
    further code de-duplication and sanitization.
 
  - Add YNL support for user headers and struct attrs.
 
  - Add partial YNL specification for devlink.
 
  - Add partial YNL specification for ethtool.
 
  - Add tc-mqprio and tc-taprio support for preemptible traffic classes.
 
  - Add tx push buf len param to ethtool, specifies the maximum number
    of bytes of a transmitted packet a driver can push directly to the
    underlying device.
 
  - Add basic LED support for switch/phy.
 
  - Add NAPI documentation, stop relaying on external links.
 
  - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
    work to make the hardware timestamping layer selectable by user
    space.
 
  - Add transceiver support and improve the error messages for CAN-FD
    controllers.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - AMD/Pensando core device support
    - MediaTek MT7981 SoC
    - MediaTek MT7988 SoC
    - Broadcom BCM53134 embedded switch
    - Texas Instruments CPSW9G ethernet switch
    - Qualcomm EMAC3 DWMAC ethernet
    - StarFive JH7110 SoC
    - NXP CBTX ethernet PHY
 
  - WiFi:
    - Apple M1 Pro/Max devices
    - RealTek rtl8710bu/rtl8188gu
    - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
 
  - Bluetooth:
    - Realtek RTL8821CS, RTL8851B, RTL8852BS
    - Mediatek MT7663, MT7922
    - NXP w8997
    - Actions Semi ATS2851
    - QTI WCN6855
    - Marvell 88W8997
 
  - Can:
    - STMicroelectronics bxcan stm32f429
 
 Drivers
 -------
  - Ethernet NICs:
    - Intel (1G, icg):
      - add tracking and reporting of QBV config errors.
      - add support for configuring max SDU for each Tx queue.
    - Intel (100G, ice):
      - refactor mailbox overflow detection to support Scalable IOV
      - GNSS interface optimization
    - Intel (i40e):
      - support XDP multi-buffer
    - nVidia/Mellanox:
      - add the support for linux bridge multicast offload
      - enable TC offload for egress and engress MACVLAN over bond
      - add support for VxLAN GBP encap/decap flows offload
      - extend packet offload to fully support libreswan
      - support tunnel mode in mlx5 IPsec packet offload
      - extend XDP multi-buffer support
      - support MACsec VLAN offload
      - add support for dynamic msix vectors allocation
      - drop RX page_cache and fully use page_pool
      - implement thermal zone to report NIC temperature
    - Netronome/Corigine:
      - add support for multi-zone conntrack offload
    - Solarflare/Xilinx:
      - support offloading TC VLAN push/pop actions to the MAE
      - support TC decap rules
      - support unicast PTP
 
  - Other NICs:
    - Broadcom (bnxt): enforce software based freq adjustments only
 		on shared PHC NIC
    - RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
    - Micrel (lan8841): add support for PTP_PF_PEROUT
    - Cadence (macb): enable PTP unicast
    - Engleder (tsnep): add XDP socket zero-copy support
    - virtio-net: implement exact header length guest feature
    - veth: add page_pool support for page recycling
    - vxlan: add MDB data path support
    - gve: add XDP support for GQI-QPL format
    - geneve: accept every ethertype
    - macvlan: allow some packets to bypass broadcast queue
    - mana: add support for jumbo frame
 
  - Ethernet high-speed switches:
    - Microchip (sparx5): Add support for TC flower templates.
 
  - Ethernet embedded switches:
    - Broadcom (b54):
      - configure 6318 and 63268 RGMII ports
    - Marvell (mv88e6xxx):
      - faster C45 bus scan
    - Microchip:
      - lan966x:
        - add support for IS1 VCAP
        - better TX/RX from/to CPU performances
      - ksz9477: add ETS Qdisc support
      - ksz8: enhance static MAC table operations and error handling
      - sama7g5: add PTP capability
    - NXP (ocelot):
      - add support for external ports
      - add support for preemptible traffic classes
    - Texas Instruments:
      - add CPSWxG SGMII support for J7200 and J721E
 
  - Intel WiFi (iwlwifi):
    - preparation for Wi-Fi 7 EHT and multi-link support
    - EHT (Wi-Fi 7) sniffer support
    - hardware timestamping support for some devices/firwmares
    - TX beacon protection on newer hardware
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - MU-MIMO parameters support
    - ack signal support for management packets
 
  - RealTek WiFi (rtw88):
    - SDIO bus support
    - better support for some SDIO devices
      (e.g. MAC address from efuse)
 
  - RealTek WiFi (rtw89):
    - HW scan support for 8852b
    - better support for 6 GHz scanning
    - support for various newer firmware APIs
    - framework firmware backwards compatibility
 
  - MediaTek WiFi (mt76):
    - P2P support
    - mesh A-MSDU support
    - EHT (Wi-Fi 7) support
    - coredump support
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
 9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
 Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
 cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
 Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
 Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
 HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
 eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
 pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
 F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
 aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
 vP7ugFnttneg
 =ITVa
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...
2023-04-26 16:07:23 -07:00
Linus Torvalds 9dd6956b38 for-6.4/block-2023-04-21
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvcIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpk+JEACj01t7Xen2+Razagu3aTx9tmRGFnTNR3MY
 raFG6B1TADk1TgCWWa2C4Dj67SOispPLm8hbIcOxqB1UscDWCCwjmnr/debADFzW
 Ap6shv/IRwVGmDp+F7ocYas0ynwooOJg4WJTwkSKz2o4m4p3vzlwAKi4fLiSjbXp
 gJTrA7WEvDOVjzajlTFUtjr8rc6PdunbGm25cPIufAxUEhvttYex2VbVqjDmfNsE
 8tyyk9RWbe4AY/ZYaGXVn4yQ/CgL/sXFkVc5noRXNfAQ/K3CVLQrFLJ3JlwUHpiA
 xXBor21TUWCZEo33Y2G5NConAYqE7etoPTkaTDO3/aZ+dAMFyhC/WAYLz1KZGMh1
 +g1fDX1QKEd40H2lfDXvqF1ob7Ut8EzUx+gvBXcc3/AiRpJ5rjfOcj6LPUMUqQJk
 nucLLFTiMKecnDMBERbvixqbaTyrjvkFEj2wYJvgj1LKXAd+x/bj8SGajs9r88Nb
 9YT9ai/+Yl7Ppfb67rCgXJU7oNZQSAQ2H+X/l2jbiqImOgq1u/45AmINnbanS7HH
 Y1I8pbH45AcnCgkJRoQwrNX3BnTOTBJ+D/4Fl4b8jsihq0D3UtwCwPCObHP4LW9S
 MUNPhP3tUuYsAgXqX80+Sao6SYvXDwnbWOM+LOaaZXgjb1ndwDUZXpto8Ra8WB1u
 8kM6s6ZR7g==
 =W1Zb
 -----END PGP SIGNATURE-----

Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - drbd patches, bringing us closer to unifying the out-of-tree version
   and the in tree one (Andreas, Christoph)

 - support for auto-quiesce for the s390 dasd driver (Stefan)

 - MD pull request via Song:
      - md/bitmap: Optimal last page size (Jon Derrick)
      - Various raid10 fixes (Yu Kuai, Li Nan)
      - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)

 - NVMe pull request via Christoph:
      - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
      - Validate nvmet module parameters (Chaitanya Kulkarni)
      - Fence TCP socket on receive error (Chris Leech)
      - Fix async event trace event (Keith Busch)
      - Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
      - Fix and cleanup nvmet Identify handling (Damien Le Moal,
        Christoph Hellwig)
      - Fix double blk_mq_complete_request race in the timeout handler
        (Lei Yin)
      - Fix irq locking in nvme-fcloop (Ming Lei)
      - Remove queue mapping helper for rdma devices (Sagi Grimberg)

 - use structured request attribute checks for nbd (Jakub)

 - fix blk-crypto race conditions between keyslot management (Eric)

 - add sed-opal support for reading read locking range attributes
   (Ondrej)

 - make fault injection configurable for null_blk (Akinobu)

 - clean up the request insertion API (Christoph)

 - clean up the queue running API (Christoph)

 - blkg config helper cleanups (Tejun)

 - lazy init support for blk-iolatency (Tejun)

 - various fixes and tweaks to ublk (Ming)

 - remove hybrid polling. It hasn't really been useful since we got
   async polled IO support, and these days we don't support sync polled
   IO at all (Keith)

 - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
   Chaitanya, me)

* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
  nbd: fix incomplete validation of ioctl arg
  ublk: don't return 0 in case of any failure
  sed-opal: geometry feature reporting command
  null_blk: Always check queue mode setting from configfs
  block: ublk: switch to ioctl command encoding
  blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
  block, bfq: Fix division by zero error on zero wsum
  fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
  block: store bdev->bd_disk->fops->submit_bio state in bdev
  block: re-arrange the struct block_device fields for better layout
  md/raid5: remove unused working_disks variable
  md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
  md/raid10: fix memleak of md thread
  md/raid10: fix memleak for 'conf->bio_split'
  md/raid10: fix leak of 'r10bio->remaining' for recovery
  md/raid10: don't BUG_ON() in raise_barrier()
  md: fix soft lockup in status_resync
  md: add error_handlers for raid0 and linear
  md: Use optimal I/O size for last bitmap page
  md: Fix types in sb writer
  ...
2023-04-26 12:52:58 -07:00
Paolo Bonzini 4f382a79a6 KVM/arm64 updates for 6.4
- Numerous fixes for the pathological lock inversion issue that
   plagued KVM/arm64 since... forever.
 
 - New framework allowing SMCCC-compliant hypercalls to be forwarded
   to userspace, hopefully paving the way for some more features
   being moved to VMMs rather than be implemented in the kernel.
 
 - Large rework of the timer code to allow a VM-wide offset to be
   applied to both virtual and physical counters as well as a
   per-timer, per-vcpu offset that complements the global one.
   This last part allows the NV timer code to be implemented on
   top.
 
 - A small set of fixes to make sure that we don't change anything
   affecting the EL1&0 translation regime just after having having
   taken an exception to EL2 until we have executed a DSB. This
   ensures that speculative walks started in EL1&0 have completed.
 
 - The usual selftest fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmRCZIwPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDoZ8P/ioXAdDbAE4hTuyD2YdKJ3IGWN3pg52Z7xc2
 rBXXFrbK9+n9FEc3AVdHoGsRPDP0Ynl+apj+aB0Klr/Fl0KKqac+W0ARX9rn1mI1
 HjeygFPaGnXjMUp0BjeSLS+g3b0gebELJ6R1QEe1/MIPb8Se7M1y3ZpMWdhe0PPL
 vyzw3LZq2OAlLgWKZhAfhh03qdr2kqJxypYs6nMrcexfn8dXT78dsYKW1nXmqKcE
 61Gg23MDPUoexYpUhm+ym5t8hltoI1di8faPmxEpaFzpSDyAg8V5vo6LiW9jn3cf
 RX0Sikk1laiRAhVbbIFCKC148vFyKxum3scpKyb91Qc+sK1kmIcxvEqlc6SfG9je
 +5ndZwAfXtW6SMSOyX8y5fXbee7M0sx3n3le9BNgwXfmLWg/GHXJ544dJgVIlf/e
 0Z+8QnP1IUDfARR/b2FlW7A7XLzNHQzO379ekcAdUptbGwlS9CrW6SJ83QR7K6fB
 bh0aSSELKsD7pX8wnNyNACvmz2zL12ITlDKdZWUr8MSxyTjgVy7s0BDsQT3sbrA1
 1sH++RvUWfC2k7tVT3vjZFzUDlPw3bnZmo5YMWRTMbXEdr1V5rDw5F5IXit13KeT
 8bk0hnJgnLmyoX2A17v5dkFMIKD7p13tqDRdfFcn0ru63HIKxgkS3ITkDmsAQELK
 DHT7RBE0
 =Bhta
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 6.4

- Numerous fixes for the pathological lock inversion issue that
  plagued KVM/arm64 since... forever.

- New framework allowing SMCCC-compliant hypercalls to be forwarded
  to userspace, hopefully paving the way for some more features
  being moved to VMMs rather than be implemented in the kernel.

- Large rework of the timer code to allow a VM-wide offset to be
  applied to both virtual and physical counters as well as a
  per-timer, per-vcpu offset that complements the global one.
  This last part allows the NV timer code to be implemented on
  top.

- A small set of fixes to make sure that we don't change anything
  affecting the EL1&0 translation regime just after having having
  taken an exception to EL2 until we have executed a DSB. This
  ensures that speculative walks started in EL1&0 have completed.

- The usual selftest fixes and improvements.
2023-04-26 15:46:52 -04:00
Paolo Bonzini b3c129e33e Minor cleanup:
- phys_to_virt conversion
  - Improvement of VSIE AP management
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmRBTJoACgkQ41TmuOI4
 ufiEkA/8C9Px89sI6iw1/w70mjreJeVXYpXudgDH8YhTs+4udLMJHXjBlYWmJijZ
 WRW7s9rHInLPXrLOx6fHrlFA+xd4giD/Ub4UHepqUCFdlhRMlykUsqS3XFfcaJ/T
 l72ik/Xq41fOrGuRrBzPqWckM+5/rpae6tdzuT5MQLaxwifH+IFi+w2jQl3gqnW5
 3BFekbflqPPdRgsTKUfP7dhk9MFQ6caGLMvGxJsjQGEziOljrpJ9apK4zrZXhaDU
 tJdA+Cd6jqsIWY3oYyinXqJYB0iEcoVMW9RpP05MrdrSMseJYSZoMB/mT2OS3xPa
 byAibx8Iu1U7HUohotWnlLj6SM8xsl5RJ2hi2kPL+7rUNIT6azd2IJ/xcgH+cUwG
 wDWTRfEH51WWirBsCLd0nvjACClcj0rEwBsRgYbvfqo82TABe7xAKslNSTL4NwVV
 TT3Lba9jQrAUNsg+UOfNVTNwy6pmkKVc4dqSmOSUC5bxKUKJO735u/442aUjc98C
 eb+FuxUNU040YEe0dG970zXkyJDJbDtQ+VX88Ko0L22iWJBGNoAXj1dpgd1sQCHY
 fc+WcHLhP1QlIfRKCff1WHWxETcepHrQizA7pJeHXgxl50VtOzUAkc1Sc4piEfpl
 ul4XTHZfBwautvqRLak9zTBK3weh3UXvFrX5u8Cl8IBzYUbuGFE=
 =IjLn
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Minor cleanup:
 - phys_to_virt conversion
 - Improvement of VSIE AP management
2023-04-26 15:43:15 -04:00
Linus Torvalds df45da57cb arm64 updates for 6.4
ACPI:
 	* Improve error reporting when failing to manage SDEI on AGDI device
 	  removal
 
 Assembly routines:
 	* Improve register constraints so that the compiler can make use of
 	  the zero register instead of moving an immediate #0 into a GPR
 
 	* Allow the compiler to allocate the registers used for CAS
 	  instructions
 
 CPU features and system registers:
 	* Cleanups to the way in which CPU features are identified from the
 	  ID register fields
 
 	* Extend system register definition generation to handle Enum types
 	  when defining shared register fields
 
 	* Generate definitions for new _EL2 registers and add new fields
 	  for ID_AA64PFR1_EL1
 
 	* Allow SVE to be disabled separately from SME on the kernel
 	  command-line
 
 Tracing:
 	* Support for "direct calls" in ftrace, which enables BPF tracing
 	  for arm64
 
 Kdump:
 	* Don't bother unmapping the crashkernel from the linear mapping,
 	  which then allows us to use huge (block) mappings and reduce
 	  TLB pressure when a crashkernel is loaded.
 
 Memory management:
 	* Try again to remove data cache invalidation from the coherent DMA
 	  allocation path
 
 	* Simplify the fixmap code by mapping at page granularity
 
 	* Allow the kfence pool to be allocated early, preventing the rest
 	  of the linear mapping from being forced to page granularity
 
 Perf and PMU:
 	* Move CPU PMU code out to drivers/perf/ where it can be reused
 	  by the 32-bit ARM architecture when running on ARMv8 CPUs
 
 	* Fix race between CPU PMU probing and pKVM host de-privilege
 
 	* Add support for Apple M2 CPU PMU
 
 	* Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
 	  dynamically, depending on what the CPU actually supports
 
 	* Minor fixes and cleanups to system PMU drivers
 
 Stack tracing:
 	* Use the XPACLRI instruction to strip PAC from pointers, rather
 	  than rolling our own function in C
 
 	* Remove redundant PAC removal for toolchains that handle this in
 	  their builtins
 
 	* Make backtracing more resilient in the face of instrumentation
 
 Miscellaneous:
 	* Fix single-step with KGDB
 
 	* Remove harmless warning when 'nokaslr' is passed on the kernel
 	  command-line
 
 	* Minor fixes and cleanups across the board
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U
 F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2
 AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7
 n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR
 POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4
 +/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ
 =78L9
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "ACPI:

   - Improve error reporting when failing to manage SDEI on AGDI device
     removal

  Assembly routines:

   - Improve register constraints so that the compiler can make use of
     the zero register instead of moving an immediate #0 into a GPR

   - Allow the compiler to allocate the registers used for CAS
     instructions

  CPU features and system registers:

   - Cleanups to the way in which CPU features are identified from the
     ID register fields

   - Extend system register definition generation to handle Enum types
     when defining shared register fields

   - Generate definitions for new _EL2 registers and add new fields for
     ID_AA64PFR1_EL1

   - Allow SVE to be disabled separately from SME on the kernel
     command-line

  Tracing:

   - Support for "direct calls" in ftrace, which enables BPF tracing for
     arm64

  Kdump:

   - Don't bother unmapping the crashkernel from the linear mapping,
     which then allows us to use huge (block) mappings and reduce TLB
     pressure when a crashkernel is loaded.

  Memory management:

   - Try again to remove data cache invalidation from the coherent DMA
     allocation path

   - Simplify the fixmap code by mapping at page granularity

   - Allow the kfence pool to be allocated early, preventing the rest of
     the linear mapping from being forced to page granularity

  Perf and PMU:

   - Move CPU PMU code out to drivers/perf/ where it can be reused by
     the 32-bit ARM architecture when running on ARMv8 CPUs

   - Fix race between CPU PMU probing and pKVM host de-privilege

   - Add support for Apple M2 CPU PMU

   - Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
     dynamically, depending on what the CPU actually supports

   - Minor fixes and cleanups to system PMU drivers

  Stack tracing:

   - Use the XPACLRI instruction to strip PAC from pointers, rather than
     rolling our own function in C

   - Remove redundant PAC removal for toolchains that handle this in
     their builtins

   - Make backtracing more resilient in the face of instrumentation

  Miscellaneous:

   - Fix single-step with KGDB

   - Remove harmless warning when 'nokaslr' is passed on the kernel
     command-line

   - Minor fixes and cleanups across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
  KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
  arm64: kexec: include reboot.h
  arm64: delete dead code in this_cpu_set_vectors()
  arm64/cpufeature: Use helper macro to specify ID register for capabilites
  drivers/perf: hisi: add NULL check for name
  drivers/perf: hisi: Remove redundant initialized of pmu->name
  arm64/cpufeature: Consistently use symbolic constants for min_field_value
  arm64/cpufeature: Pull out helper for CPUID register definitions
  arm64/sysreg: Convert HFGITR_EL2 to automatic generation
  ACPI: AGDI: Improve error reporting for problems during .remove()
  arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
  perf/arm-cmn: Fix port detection for CMN-700
  arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
  arm64: move PAC masks to <asm/pointer_auth.h>
  arm64: use XPACLRI to strip PAC
  arm64: avoid redundant PAC stripping in __builtin_return_address()
  arm64/sme: Fix some comments of ARM SME
  arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
  arm64/signal: Use system_supports_tpidr2() to check TPIDR2
  arm64/idreg: Don't disable SME when disabling SVE
  ...
2023-04-25 12:39:01 -07:00
Linus Torvalds e7989789c6 Timers and timekeeping updates:
- Improve the VDSO build time checks to cover all dynamic relocations
 
     VDSO does not allow dynamic relcations, but the build time check is
     incomplete and fragile.
 
     It's based on architectures specifying the relocation types to search
     for and does not handle R_*_NONE relocation entries correctly.
     R_*_NONE relocations are injected by some GNU ld variants if they fail
     to determine the exact .rel[a]/dyn_size to cover trailing zeros.
     R_*_NONE relocations must be ignored by dynamic loaders, so they
     should be ignored in the build time check too.
 
     Remove the architecture specific relocation types to check for and
     validate strictly that no other relocations than R_*_NONE end up
     in the VSDO .so file.
 
   - Prefer signal delivery to the current thread for
     CLOCK_PROCESS_CPUTIME_ID based posix-timers
 
     Such timers prefer to deliver the signal to the main thread of a
     process even if the context in which the timer expires is the current
     task. This has the downside that it might wake up an idle thread.
 
     As there is no requirement or guarantee that the signal has to be
     delivered to the main thread, avoid this by preferring the current
     task if it is part of the thread group which shares sighand.
 
     This not only avoids waking idle threads, it also distributes the
     signal delivery in case of multiple timers firing in the context
     of different threads close to each other better.
 
   - Align the tick period properly (again)
 
     For a long time the tick was starting at CLOCK_MONOTONIC zero, which
     allowed users space applications to either align with the tick or to
     place a periodic computation so that it does not interfere with the
     tick. The alignement of the tick period was more by chance than by
     intention as the tick is set up before a high resolution clocksource is
     installed, i.e. timekeeping is still tick based and the tick period
     advances from there.
 
     The early enablement of sched_clock() broke this alignement as the time
     accumulated by sched_clock() is taken into account when timekeeping is
     initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
     multiple of tick periods, which breaks applications which relied on
     that behaviour.
 
     Cure this by aligning the tick starting point to the next multiple of
     tick periods, i.e 1000ms/CONFIG_HZ.
 
  - A set of NOHZ fixes and enhancements
 
    - Cure the concurrent writer race for idle and IO sleeptime statistics
 
      The statitic values which are exposed via /proc/stat are updated from
      the CPU local idle exit and remotely by cpufreq, but that happens
      without any form of serialization. As a consequence sleeptimes can be
      accounted twice or worse.
 
      Prevent this by restricting the accumulation writeback to the CPU
      local idle exit and let the remote access compute the accumulated
      value.
 
    - Protect idle/iowait sleep time with a sequence count
 
      Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
      idle exit updates. As a consequence the readout may result in random
      and potentially going backwards values.
 
      Protect this by a sequence count, which fixes the idle time
      statistics issue, but cannot fix the iowait time problem because
      iowait time accounting races with remote wake ups decrementing the
      remote runqueues nr_iowait counter. The latter is impossible to fix,
      so the only way to deal with that is to document it properly and to
      remove the assertion in the selftest which triggers occasionally due
      to that.
 
    - Restructure struct tick_sched for better cache layout
 
    - Some small cleanups and a better cache layout for struct tick_sched
 
  - Implement the missing timer_wait_running() callback for POSIX CPU timers
 
    For unknown reason the introduction of the timer_wait_running() callback
    missed to fixup posix CPU timers, which went unnoticed for almost four
    years.
 
    While initially only targeted to prevent livelocks between a timer
    deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
    turned out that fixing this for mainline is not as trivial as just
    implementing a stub similar to the hrtimer/timer callbacks.
 
    The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
    there is a livelock issue independent of RT.
 
    CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
    out from hard interrupt context to task work, which is handled before
    returning to user space or to a VM. The expiry mechanism moves the
    expired timers to a stack local list head with sighand lock held. Once
    sighand is dropped the task can be preempted and a task which wants to
    delete a timer will spin-wait until the expiry task is scheduled back
    in. In the worst case this will end up in a livelock when the preempting
    task and the expiry task are pinned on the same CPU.
 
    The timer wheel has a timer_wait_running() mechanism for RT, which uses
    a per CPU timer-base expiry lock which is held by the expiry code and the
    task waiting for the timer function to complete blocks on that lock.
 
    This does not work in the same way for posix CPU timers as there is no
    timer base and expiry for process wide timers can run on any task
    belonging to that process, but the concept of waiting on an expiry lock
    can be used too in a slightly different way.
 
    Add a per task mutex to struct posix_cputimers_work, let the expiry task
    hold it accross the expiry function and let the deleting task which
    waits for the expiry to complete block on the mutex.
 
    In the non-contended case this results in an extra mutex_lock()/unlock()
    pair on both sides.
 
    This avoids spin-waiting on a task which is scheduled out, prevents the
    livelock and cures the problem for RT and !RT systems.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmRGrj4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZhdEAC/lwfDWCnTXHC8ExQQRDIVNyXmDlLb
 EHB8ZY7Wc4gNZ8UEXEOLOXJHMG9bsbtPGctVewJwRGnXZWKVhpPwQba6kCRycyX0
 0J6l5DlvUaGGrpoOzOZwgETRmtIZE9tEArZR8xlfRScYd93a7yLhwIjO8JaV9vKs
 IQpAQMeJ/ysp6gHrS59qakYfoHU/ERUAu3Tk4GqHUtPtcyz3nX3eTlLWV8LySqs+
 00qr2yc0bQFUFoKzTCxtM8lcEi9ja9SOj1rw28348O+BXE4d0HC12Ie7eU/CDN2Y
 OAlWYxVjy4LMh24LDrRQKTzoVqx9MXDx2g+09B3t8NK5LgeS+EJIjujDhZF147/H
 5y906nplZUKa8BiZW5Rpm/HKH8tFI80T9XWSQCRBeMgTEJyRyRU1yASAwO4xw+dY
 Dn3tGmFGymcV/72o4ic9JFKQd8cTSxPjEJS3qqzMkEAtyI/zPBmKxj/Tce50OH40
 6FSZq1uU21ZQzszwSHISwgFtNr75laUSK4Z1te5OhPOOz+C7O9YqHvqS/1jwhPj2
 tMd8X17fRW3UTUBlBj+zqxqiEGBl/Yk2AvKrJIXGUtfWYCtjMJ7ieCf0kZ7NSVJx
 9ewubA0gqseMD783YomZsy8LLtMKnhclJeslUOVb1oKs1q/WF1R/k6qjy9vUwYaB
 nIJuHl8mxSetag==
 =SVnj
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timers and timekeeping updates from Thomas Gleixner:

 - Improve the VDSO build time checks to cover all dynamic relocations

   VDSO does not allow dynamic relocations, but the build time check is
   incomplete and fragile.

   It's based on architectures specifying the relocation types to search
   for and does not handle R_*_NONE relocation entries correctly.
   R_*_NONE relocations are injected by some GNU ld variants if they
   fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
   R_*_NONE relocations must be ignored by dynamic loaders, so they
   should be ignored in the build time check too.

   Remove the architecture specific relocation types to check for and
   validate strictly that no other relocations than R_*_NONE end up in
   the VSDO .so file.

 - Prefer signal delivery to the current thread for
   CLOCK_PROCESS_CPUTIME_ID based posix-timers

   Such timers prefer to deliver the signal to the main thread of a
   process even if the context in which the timer expires is the current
   task. This has the downside that it might wake up an idle thread.

   As there is no requirement or guarantee that the signal has to be
   delivered to the main thread, avoid this by preferring the current
   task if it is part of the thread group which shares sighand.

   This not only avoids waking idle threads, it also distributes the
   signal delivery in case of multiple timers firing in the context of
   different threads close to each other better.

 - Align the tick period properly (again)

   For a long time the tick was starting at CLOCK_MONOTONIC zero, which
   allowed users space applications to either align with the tick or to
   place a periodic computation so that it does not interfere with the
   tick. The alignement of the tick period was more by chance than by
   intention as the tick is set up before a high resolution clocksource
   is installed, i.e. timekeeping is still tick based and the tick
   period advances from there.

   The early enablement of sched_clock() broke this alignement as the
   time accumulated by sched_clock() is taken into account when
   timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
   not longer a multiple of tick periods, which breaks applications
   which relied on that behaviour.

   Cure this by aligning the tick starting point to the next multiple of
   tick periods, i.e 1000ms/CONFIG_HZ.

 - A set of NOHZ fixes and enhancements:

     * Cure the concurrent writer race for idle and IO sleeptime
       statistics

       The statitic values which are exposed via /proc/stat are updated
       from the CPU local idle exit and remotely by cpufreq, but that
       happens without any form of serialization. As a consequence
       sleeptimes can be accounted twice or worse.

       Prevent this by restricting the accumulation writeback to the CPU
       local idle exit and let the remote access compute the accumulated
       value.

     * Protect idle/iowait sleep time with a sequence count

       Reading idle/iowait sleep time, e.g. from /proc/stat, can race
       with idle exit updates. As a consequence the readout may result
       in random and potentially going backwards values.

       Protect this by a sequence count, which fixes the idle time
       statistics issue, but cannot fix the iowait time problem because
       iowait time accounting races with remote wake ups decrementing
       the remote runqueues nr_iowait counter. The latter is impossible
       to fix, so the only way to deal with that is to document it
       properly and to remove the assertion in the selftest which
       triggers occasionally due to that.

     * Restructure struct tick_sched for better cache layout

     * Some small cleanups and a better cache layout for struct
       tick_sched

 - Implement the missing timer_wait_running() callback for POSIX CPU
   timers

   For unknown reason the introduction of the timer_wait_running()
   callback missed to fixup posix CPU timers, which went unnoticed for
   almost four years.

   While initially only targeted to prevent livelocks between a timer
   deletion and the timer expiry function on PREEMPT_RT enabled kernels,
   it turned out that fixing this for mainline is not as trivial as just
   implementing a stub similar to the hrtimer/timer callbacks.

   The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
   systems there is a livelock issue independent of RT.

   CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
   timers out from hard interrupt context to task work, which is handled
   before returning to user space or to a VM. The expiry mechanism moves
   the expired timers to a stack local list head with sighand lock held.
   Once sighand is dropped the task can be preempted and a task which
   wants to delete a timer will spin-wait until the expiry task is
   scheduled back in. In the worst case this will end up in a livelock
   when the preempting task and the expiry task are pinned on the same
   CPU.

   The timer wheel has a timer_wait_running() mechanism for RT, which
   uses a per CPU timer-base expiry lock which is held by the expiry
   code and the task waiting for the timer function to complete blocks
   on that lock.

   This does not work in the same way for posix CPU timers as there is
   no timer base and expiry for process wide timers can run on any task
   belonging to that process, but the concept of waiting on an expiry
   lock can be used too in a slightly different way.

   Add a per task mutex to struct posix_cputimers_work, let the expiry
   task hold it accross the expiry function and let the deleting task
   which waits for the expiry to complete block on the mutex.

   In the non-contended case this results in an extra
   mutex_lock()/unlock() pair on both sides.

   This avoids spin-waiting on a task which is scheduled out, prevents
   the livelock and cures the problem for RT and !RT systems

* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Implement the missing timer_wait_running callback
  selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
  selftests/proc: Remove idle time monotonicity assertions
  MAINTAINERS: Remove stale email address
  timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
  timers/nohz: Add a comment about broken iowait counter update race
  timers/nohz: Protect idle/iowait sleep time under seqcount
  timers/nohz: Only ever update sleeptime from idle exit
  timers/nohz: Restructure and reshuffle struct tick_sched
  tick/common: Align tick period with the HZ tick.
  selftests/timers/posix_timers: Test delivery of signals across threads
  posix-timers: Prefer delivery of signals to the current thread
  vdso: Improve cmd_vdso_check to check all dynamic relocations
2023-04-25 11:22:46 -07:00
Linus Torvalds 5dfb75e842 RCU Changes for 6.4:
o  MAINTAINERS files additions and changes.
  o  Fix hotplug warning in nohz code.
  o  Tick dependency changes by Zqiang.
  o  Lazy-RCU shrinker fixes by Zqiang.
  o  rcu-tasks stall reporting improvements by Neeraj.
  o  Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
     name for robustness.
  o  Documentation Updates:
  o  Significant changes to srcu_struct size.
  o  Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
  o  rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
  o  Other misc changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmQuBnIACgkQqA4nf2o4
 5hACVRAAoXu7/gfh5Pjw9O4E4pCdPJKsZZVYrcrVGrq6NAxRn6M1SgurAdC5grj2
 96x0waoGaiO82V0H5iJMcKdAVu67x9R8WaQ1JoxN75Efn8h9W4TguB87TV1gk0xS
 eZ18b/CyEaM5mNb80DFFF4FLohy5737p/kNTMqXQdUyR1BsDl16iRMgjiBiFhNUx
 yPo8Y2kC2U2OTbldZgaE7s9bQO3xxEcifx93sGWsAex/gx54FYNisiwSlCOSgOE+
 XkYo/OKk8Xvr82tLVX8XQVEPCMJ+rxea8T5zSs8/alvsPq7gA8wW3y6fsoa3vUU/
 +Gd+W+Q/OsONIDtp8rQAY1qsD0ScDpaR8052RSH0zTa7pj8HsQgE5PjZ+cJW0SEi
 cKN+Oe8+ETqKald+xZ6PDf58O212VLrru3RpQWrOQcJ7fmKmfT4REK0RcbLgg4qT
 CBgOo6eg+ub4pxq2y11LZJBNTv1/S7xAEzFE0kArew64KB2gyVud0VJRZVAJnEfe
 93QQVDFrwK2bhgWQZ6J6IbTvGeQW0L93IibuaU6jhZPR283VtUIIvM7vrOylN7Fq
 4jsae0T7YGYfKUhgTpm7rCnm8A/D3Ni8MY0sKYYgDSyKmZUsnpI5wpx1xke4lwwV
 ErrY46RCFa+k8wscc6iWfB4cGXyyFHyu+wtyg0KpFn5JAzcfz4A=
 =Rgbj
 -----END PGP SIGNATURE-----

Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux

Pull RCU updates from Joel Fernandes:

 - Updates and additions to MAINTAINERS files, with Boqun being added to
   the RCU entry and Zqiang being added as an RCU reviewer.

   I have also transitioned from reviewer to maintainer; however, Paul
   will be taking over sending RCU pull-requests for the next merge
   window.

 - Resolution of hotplug warning in nohz code, achieved by fixing
   cpu_is_hotpluggable() through interaction with the nohz subsystem.

   Tick dependency modifications by Zqiang, focusing on fixing usage of
   the TICK_DEP_BIT_RCU_EXP bitmask.

 - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
   kernels, fixed by Zqiang.

 - Improvements to rcu-tasks stall reporting by Neeraj.

 - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
   increased robustness, affecting several components like mac802154,
   drbd, vmw_vmci, tracing, and more.

   A report by Eric Dumazet showed that the API could be unknowingly
   used in an atomic context, so we'd rather make sure they know what
   they're asking for by being explicit:

      https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/

 - Documentation updates, including corrections to spelling,
   clarifications in comments, and improvements to the srcu_size_state
   comments.

 - Better srcu_struct cache locality for readers, by adjusting the size
   of srcu_struct in support of SRCU usage by Christoph Hellwig.

 - Teach lockdep to detect deadlocks between srcu_read_lock() vs
   synchronize_srcu() contributed by Boqun.

   Previously lockdep could not detect such deadlocks, now it can.

 - Integration of rcutorture and rcu-related tools, targeted for v6.4
   from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
   module parameter, and more

 - Miscellaneous changes, various code cleanups and comment improvements

* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
  checkpatch: Error out if deprecated RCU API used
  mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
  rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
  ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
  net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
  net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
  rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
  rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
  rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
  rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
  rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
  rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
  rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
  rcu/trace: use strscpy() to instead of strncpy()
  tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
  ...
2023-04-24 12:16:14 -07:00
Jakub Kicinski 9a82cdc28f bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZELn8wAKCRDbK58LschI
 g1khAQC1nmXPuKjM4EAfFK8Ysb3KoF8ADmpE97n+/HEDydCagwD/bX0+NABR75Nh
 ueGcoU1TcfcbshDzrH0s+C95owZDZw4=
 =BeZM
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-04-21

We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).

The main changes are:

1) Add a new BPF netfilter program type and minimal support to hook
   BPF programs to netfilter hooks such as prerouting or forward,
   from Florian Westphal.

2) Fix race between btf_put and btf_idr walk which caused a deadlock,
   from Alexei Starovoitov.

3) Second big batch to migrate test_verifier unit tests into test_progs
   for ease of readability and debugging, from Eduard Zingerman.

4) Add support for refcounted local kptrs to the verifier for allowing
   shared ownership, useful for adding a node to both the BPF list and
   rbtree, from Dave Marchevsky.

5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
  selftests into libbpf-provided bpf_helpers.h header and improve
  kfunc handling, from Andrii Nakryiko.

6) Support 64-bit pointers to kfuncs needed for archs like s390x,
   from Ilya Leoshkevich.

7) Support BPF progs under getsockopt with a NULL optval,
   from Stanislav Fomichev.

8) Improve verifier u32 scalar equality checking in order to enable
   LLVM transformations which earlier had to be disabled specifically
   for BPF backend, from Yonghong Song.

9) Extend bpftool's struct_ops object loading to support links,
   from Kui-Feng Lee.

10) Add xsk selftest follow-up fixes for hugepage allocated umem,
    from Magnus Karlsson.

11) Support BPF redirects from tc BPF to ifb devices,
    from Daniel Borkmann.

12) Add BPF support for integer type when accessing variable length
    arrays, from Feng Zhou.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
  selftests/bpf: verifier/value_ptr_arith converted to inline assembly
  selftests/bpf: verifier/value_illegal_alu converted to inline assembly
  selftests/bpf: verifier/unpriv converted to inline assembly
  selftests/bpf: verifier/subreg converted to inline assembly
  selftests/bpf: verifier/spin_lock converted to inline assembly
  selftests/bpf: verifier/sock converted to inline assembly
  selftests/bpf: verifier/search_pruning converted to inline assembly
  selftests/bpf: verifier/runtime_jit converted to inline assembly
  selftests/bpf: verifier/regalloc converted to inline assembly
  selftests/bpf: verifier/ref_tracking converted to inline assembly
  selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
  selftests/bpf: verifier/map_in_map converted to inline assembly
  selftests/bpf: verifier/lwt converted to inline assembly
  selftests/bpf: verifier/loops1 converted to inline assembly
  selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
  selftests/bpf: verifier/direct_packet_access converted to inline assembly
  selftests/bpf: verifier/d_path converted to inline assembly
  selftests/bpf: verifier/ctx converted to inline assembly
  selftests/bpf: verifier/btf_ctx_access converted to inline assembly
  selftests/bpf: verifier/bpf_get_stack converted to inline assembly
  ...
====================

Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21 20:32:37 -07:00
Linus Torvalds 6b008640db mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
Instead of having callers care about the mmap_min_addr logic for the
lowest valid mapping address (and some of them getting it wrong), just
move the logic into vm_unmapped_area() itself.  One less thing for various
architecture cases (and generic helpers) to worry about.

We should really try to make much more of this be common code, but baby
steps..

Without this, vm_unmapped_area() could return an address below
mmap_min_addr (because some caller forgot about that).  That then causes
the mmap machinery to think it has found a workable address, but then
later security_mmap_addr(addr) is unhappy about it and the mmap() returns
with a nonsensical error (EPERM).

The proper action is to either return ENOMEM (if the virtual address space
is exhausted), or try to find another address (ie do a bottom-up search
for free addresses after the top-down one failed).

See commit 2afc745f3e ("mm: ensure get_unmapped_area() returns higher
address than mmap_min_addr"), which fixed this for one call site (the
generic arch_get_unmapped_area_topdown() fallback) but left other cases
alone.

Link: https://lkml.kernel.org/r/20230418214009.1142926-1-Liam.Howlett@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-21 14:52:05 -07:00
Stefan Roesch d7597f59d1 mm: add new api to enable ksm per process
Patch series "mm: process/cgroup ksm support", v9.

So far KSM can only be enabled by calling madvise for memory regions.  To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.

Use case 1:
  The madvise call is not available in the programming language.  An
  example for this are programs with forked workloads using a garbage
  collected language without pointers.  In such a language madvise cannot
  be made available.

  In addition the addresses of objects get moved around as they are
  garbage collected.  KSM sharing needs to be enabled "from the outside"
  for these type of workloads.

Use case 2:
  The same interpreter can also be used for workloads where KSM brings
  no benefit or even has overhead.  We'd like to be able to enable KSM on
  a workload by workload basis.

Use case 3:
  With the madvise call sharing opportunities are only enabled for the
  current process: it is a workload-local decision.  A considerable number
  of sharing opportunities may exist across multiple workloads or jobs (if
  they are part of the same security domain).  Only a higler level entity
  like a job scheduler or container can know for certain if its running
  one or more instances of a job.  That job scheduler however doesn't have
  the necessary internal workload knowledge to make targeted madvise
  calls.

Security concerns:

  In previous discussions security concerns have been brought up.  The
  problem is that an individual workload does not have the knowledge about
  what else is running on a machine.  Therefore it has to be very
  conservative in what memory areas can be shared or not.  However, if the
  system is dedicated to running multiple jobs within the same security
  domain, its the job scheduler that has the knowledge that sharing can be
  safely enabled and is even desirable.

Performance:

  Experiments with using UKSM have shown a capacity increase of around 20%.

  Here are the metrics from an instagram workload (taken from a machine
  with 64GB main memory):

   full_scans: 445
   general_profit: 20158298048
   max_page_sharing: 256
   merge_across_nodes: 1
   pages_shared: 129547
   pages_sharing: 5119146
   pages_to_scan: 4000
   pages_unshared: 1760924
   pages_volatile: 10761341
   run: 1
   sleep_millisecs: 20
   stable_node_chains: 167
   stable_node_chains_prune_millisecs: 2000
   stable_node_dups: 2751
   use_zero_pages: 0
   zero_pages_sharing: 0

After the service is running for 30 minutes to an hour, 4 to 5 million
shared pages are common for this workload when using KSM.


Detailed changes:

1. New options for prctl system command
   This patch series adds two new options to the prctl system call. 
   The first one allows to enable KSM at the process level and the second
   one to query the setting.

The setting will be inherited by child processes.

With the above setting, KSM can be enabled for the seed process of a cgroup
and all processes in the cgroup will inherit the setting.

2. Changes to KSM processing
   When KSM is enabled at the process level, the KSM code will iterate
   over all the VMA's and enable KSM for the eligible VMA's.

   When forking a process that has KSM enabled, the setting will be
   inherited by the new child process.

3. Add general_profit metric
   The general_profit metric of KSM is specified in the documentation,
   but not calculated.  This adds the general profit metric to
   /sys/kernel/debug/mm/ksm.

4. Add more metrics to ksm_stat
   This adds the process profit metric to /proc/<pid>/ksm_stat.

5. Add more tests to ksm_tests and ksm_functional_tests
   This adds an option to specify the merge type to the ksm_tests. 
   This allows to test madvise and prctl KSM.

   It also adds a two new tests to ksm_functional_tests: one to test
   the new prctl options and the other one is a fork test to verify that
   the KSM process setting is inherited by client processes.


This patch (of 3):

So far KSM can only be enabled by calling madvise for memory regions.  To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.

1. New options for prctl system command

   This patch series adds two new options to the prctl system call.
   The first one allows to enable KSM at the process level and the second
   one to query the setting.

   The setting will be inherited by child processes.

   With the above setting, KSM can be enabled for the seed process of a
   cgroup and all processes in the cgroup will inherit the setting.

2. Changes to KSM processing

   When KSM is enabled at the process level, the KSM code will iterate
   over all the VMA's and enable KSM for the eligible VMA's.

   When forking a process that has KSM enabled, the setting will be
   inherited by the new child process.

  1) Introduce new MMF_VM_MERGE_ANY flag

     This introduces the new flag MMF_VM_MERGE_ANY flag.  When this flag
     is set, kernel samepage merging (ksm) gets enabled for all vma's of a
     process.

  2) Setting VM_MERGEABLE on VMA creation

     When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the
     VM_MERGEABLE flag will be set for this VMA.

  3) support disabling of ksm for a process

     This adds the ability to disable ksm for a process if ksm has been
     enabled for the process with prctl.

  4) add new prctl option to get and set ksm for a process

     This adds two new options to the prctl system call
     - enable ksm for all vmas of a process (if the vmas support it).
     - query if ksm has been enabled for a process.

3. Disabling MMF_VM_MERGE_ANY for storage keys in s390

   In the s390 architecture when storage keys are used, the
   MMF_VM_MERGE_ANY will be disabled.

Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-21 14:52:03 -07:00
Nico Boehr 8a46df7cd1 KVM: s390: pci: fix virtual-physical confusion on module unload/load
When the kvm module is unloaded, zpci_setup_aipb() perists some data in the
zpci_aipb structure in s390 pci code. Note that this struct is also passed
to firmware in the zpci_set_irq_ctrl() call and thus the GAIT must be a
physical address.

On module re-insertion, the GAIT is restored from this structure in
zpci_reset_aipb(). But it is a physical address, hence this may cause
issues when the kvm module is unloaded and loaded again.

Fix virtual vs physical address confusion (which currently are the same) by
adding the necessary physical-to-virtual-conversion in zpci_reset_aipb().

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230222155503.43399-1-nrb@linux.ibm.com
Message-Id: <20230222155503.43399-1-nrb@linux.ibm.com>
2023-04-20 16:30:35 +02:00
Pierre Morel 7be3e33923 KVM: s390: vsie: clarifications on setting the APCB
The APCB is part of the CRYCB.
The calculation of the APCB origin can be done by adding
the APCB offset to the CRYCB origin.

Current code makes confusing transformations, converting
the CRYCB origin to a pointer to calculate the APCB origin.

Let's make things simpler and keep the CRYCB origin to make
these calculations.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230214122841.13066-2-pmorel@linux.ibm.com
Message-Id: <20230214122841.13066-2-pmorel@linux.ibm.com>
2023-04-20 16:30:34 +02:00
Nico Boehr 2f2c0911b9 KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
We sometimes put a virtual address in next_alert, which should always be
a physical address, since it is shared with hardware.

This currently works, because virtual and physical addresses are
the same.

Add phys_to_virt() to resolve the virtual-physical confusion.

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230223162236.51569-1-nrb@linux.ibm.com
Message-Id: <20230223162236.51569-1-nrb@linux.ibm.com>
2023-04-20 16:26:20 +02:00
Heiko Carstens 2a405f6bb3 s390/stackleak: provide fast __stackleak_poison() implementation
Provide an s390 specific __stackleak_poison() implementation which is
faster than the generic variant.

For the original implementation with an enforced 4kb stackframe for the
getpid() system call the system call overhead increases by a factor of 3 if
the stackleak feature is enabled. Using the s390 mvc based variant this is
reduced to an increase of 25% instead.

This is within the expected area, since the mvc based implementation is
more or less a memset64() variant which comes with similar results. See
commit 0b77d6701c ("s390: implement memset16, memset32 & memset64").

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405130841.1350565-3-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:35 +02:00
Heiko Carstens ccf7c3fb61 s390: select ARCH_USE_SYM_ANNOTATIONS
All old style assembly annotations have been converted for s390. Select
ARCH_USE_SYM_ANNOTATIONS to make sure the old macros like ENTRY() aren't
available anymore. This prevents that new code which uses the old macros
will be added again.

This follows what has been done for x86 with commit 2ce0d7f976 ("x86/asm:
Provide a Kconfig symbol for disabling old assembly annotations") and for
arm64 with commit 50479d58ea ("arm64: Disable old style assembly
annotations").

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:30 +02:00
Heiko Carstens 34e4c79f3b s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
Make use of the set_direct_map() calls for module allocations.
In particular:

- All changes to read-only permissions in kernel VA mappings are also
  applied to the direct mapping. Note that execute permissions are
  intentionally not applied to the direct mapping in order to make
  sure that all allocated pages within the direct mapping stay
  non-executable

- module_alloc() passes the VM_FLUSH_RESET_PERMS to __vmalloc_node_range()
  to make sure that all implicit permission changes made to the direct
  mapping are reset when the allocated vm area is freed again

Side effects: the direct mapping will be fragmented depending on how many
vm areas with VM_FLUSH_RESET_PERMS and/or explicit page permission changes
are allocated and freed again.

For example, just after boot of a system the direct mapping statistics look
like:

$cat /proc/meminfo
...
DirectMap4k:      111628 kB
DirectMap1M:    16665600 kB
DirectMap2G:           0 kB

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:29 +02:00
Heiko Carstens 7608f70adc s390: wire up memfd_secret system call
s390 supports ARCH_HAS_SET_DIRECT_MAP, therefore wire up the
memfd_secret system call, which depends on it.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:29 +02:00
Heiko Carstens 0490d6d7ba s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
Implement the set_direct_map_*() API, which allows to invalidate and set
default permissions to pages within the direct mapping.

Note that kernel_page_present(), which is also supposed to be part of this
API, is intentionally not implemented. The reason for this is that
kernel_page_present() is only used (and currently only makes sense) for
suspend/resume, which isn't supported on s390.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:29 +02:00
Heiko Carstens 17c51b1ba9 s390/mm: use BIT macro to generate SET_MEMORY bit masks
Use BIT macro to generate SET_MEMORY bit masks, which is easier to
maintain if bits get added, or removed.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20 11:36:29 +02:00
Heiko Carstens 0ae241f4d7 s390/relocate_kernel: adjust indentation
relocate_kernel.S seems to be the only assembler file which doesn't
follow the standard way of indentation. Adjust this for the sake of
consistency.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:18 +02:00
Heiko Carstens 680957b3b8 s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:18 +02:00
Heiko Carstens fda1dffa44 s390/entry: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:18 +02:00
Heiko Carstens 04b6d02dbe s390/purgatory: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:18 +02:00
Heiko Carstens 6cea5f0bc9 s390/kprobes: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:18 +02:00
Heiko Carstens 26d1429922 s390/reipl: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens 05d0935d12 s390/head64: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens a89d60fc7a s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens aaaac068f0 s390/mcount: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens b5f3c99d15 s390/crc32le: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens 4b788ac8ed s390/crc32be: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens 3e5e5107b7 s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:17 +02:00
Heiko Carstens ac0c06a1dc s390/amode31: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:16 +02:00
Heiko Carstens 45769052ae s390/lib: use SYM* macros instead of ENTRY(), etc.
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:16 +02:00
Heiko Carstens e48b6853d8 s390/kasan: remove override of mem*() functions
The kasan mem*() functions are not used anymore since s390 has switched
to GENERIC_ENTRY and commit 69d4c0d321 ("entry, kasan, x86: Disallow
overriding mem*() functions").

Therefore remove the now dead code, similar to x86.
While at it also use the SYM* macros in mem.S.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-19 17:24:16 +02:00