According to the IB specification, the destination qpn is allowed to be
filled into the qpc only when the qp transitions from Init to RTR, so this
code is unused.
Link: https://lore.kernel.org/r/1629985056-57004-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The resp passed to the user space represents the enable flag of qp,
incomplete assignment will cause some features of the user space to be
disabled.
Fixes: 90ae0b57e4 ("RDMA/hns: Combine enable flags of qp")
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629985056-57004-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx and dgid should be a one-to-one mapping relationship, but when
qp_num loops back to the start number, it may happen that two different
dgid are assiociated to the same dip_idx incorrectly.
One solution is to store the qp_num that is not assigned to dip_idx in an
array. When a dip_idx needs to be allocated to a new dgid, an spare qp_num
is extracted and assigned to dip_idx.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the dgid-dip_idx mapping relationship exists, dip should be assigned.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx is associated with qp_num whose data type is u32. However, dip_idx
is incorrectly defined as u8 data in the hns_roce_dip struct, which leads
to data truncation during value assignment.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In RNR NAK screnario, according to the specification, when no credit is
available, only the first fragment of the send request can be sent. The
LSN(Limit Sequence Number) field should be 0 or the entire packet will be
resent.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1629883169-2306-1-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This allows using the normal sg_table APIs and makes all the code
cleaner. Remove sgt, nents and nmapd from ib_umem.
Link: https://lore.kernel.org/r/20210824142531.3877007-4-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The resources that use the hns bitmap interface: qp, cq, mr, pd, xrcd,
uar, srq, have been changed to IDA interfaces, and the unused hns' own
bitmap interfaces need to be deleted.
Link: https://lore.kernel.org/r/1629336980-17499-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch srq index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch uar index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ownerbit mode is for external card mode. Make it controlled by the
firmware.
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629539607-33217-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The vector field naming is quite confusing, it is better referred to as
irqn.
Link: https://lore.kernel.org/r/20210811151131.39138-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cpu field in efa_irq struct is unused, remove it.
Link: https://lore.kernel.org/r/20210811151131.39138-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Saeed Mahameed says:
====================
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
We need this in net-next as multiple features are dependent on the
single FDB feature.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* mellanox/mlx5-next:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
Make sure to free the IRQ vectors in case the allocation doesn't return
the expected number of IRQs.
Fixes: b7f5e880f3 ("RDMA/efa: Add the efa module")
Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in
function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the
error handling path of bnxt_re_register_netdev(), which may cause a
deadlock. This bug is suggested by a static analysis tool.
Fixes: c2b777a959 ("RDMA/bnxt_re: Refactor device add/remove functionalities")
Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Qedr code is tightly coupled with existing both INIT transitions. Here,
during first INIT transition all variables are reset and the RESET state
is checked in post_recv() before any posting.
Commit dc70f7c3ed ("RDMA/cma: Remove unnecessary INIT->INIT transition")
exposed this bug.
So moving variables reset to qedr_set_common_qp_params() and also avoid
RESET state check for post_recv().
Link: https://lore.kernel.org/r/20210811051650.14914-1-pkushwaha@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just use seq_write to copy the stats into the seq_file buffer instead of
poking holes into the seq_file abstraction.
Link: https://lore.kernel.org/r/20210810151711.1795374-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);
However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);
To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If re-registering an MR in hns_roce_rereg_user_mr(), we should return NULL
instead of passing 0 to ERR_PTR for clarity.
Fixes: 4e9fc1dae2 ("RDMA/hns: Optimize the MR registration process")
Link: https://lore.kernel.org/r/20210804125939.20516-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In Kconfig, references to config symbols do not use the prefix "CONFIG_".
Commit fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove
i40iw") selects config CONFIG_AUXILIARY_BUS in config INFINIBAND_IRDMA,
but intended to select config AUXILIARY_BUS.
Fixes: fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw")
Link: https://lore.kernel.org/r/20210817084158.10095-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the below crash when deleting a slave from the unaffiliated list
twice. First time when the slave is bound to the master and the second
when the slave is unloaded.
Fix it by checking if slave is unaffiliated (doesn't have ib device)
before removing from the list.
RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib]
Call Trace:
auxiliary_bus_remove+0x18/0x30
__device_release_driver+0x177/x220
device_release_driver+0x24/0x30
bus_remove_device+0xd8/0x140
device_del+0x18a/0x3e0
mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core]
mlx5_unregister_device+0x34/0x60 [mlx5_core]
mlx5_uninit_one+0x32/0x100 [mlx5_core]
remove_one+0x6e/0xe0 [mlx5_core]
pci_device_remove+0x36/0xa0
__device_release_driver+0x177/0x220
device_driver_detach+0x3c/0xa0
unbind_store+0x113/0x130
kernfs_fop_write_iter+0x110/0x1a0
new_sync_write+0x116/0x1a0
vfs_write+0x1ba/0x260
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 93f8244431 ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus")
Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
can and ieee802154.
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid
dma mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans
on idle systems to prevent frequent wake ups
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hzDl
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
Saeed Mahameed says:
====================
pull-request: mlx5-next 2020-08-9
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
[1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/
[2] 0e3364dab7.1626609184.git.leonro@nvidia.com/
[3] 55e1d69bef.1624258894.git.leonro@nvidia.com/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
net/mlx5: Add DCS caps & fields support
====================
Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CQ destroy is performed based on the IRQ number that is stored in
cq->irqn. That number wasn't set explicitly during CQ creation and as
expected some of the API users of mlx5_core_create_cq() forgot to update
it.
This caused to wrong synchronization call of the wrong IRQ with a number
0 instead of the real one.
As a fix, set the IRQ number directly in the mlx5_core_create_cq() and
update all users accordingly.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Fixes: ef1659ade3 ("IB/mlx5: Add DEVX support for CQ events")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.
Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.
Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().
Fixes: 7183451f84 ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Shared FDB allows to create a single RDMA device that holds representors
from both eswitches. As shared FDB is only active when both uplink
representors are enslaved there is a single RDMA port that represents
both uplinks.
The number of ports is the number of vports on both eswitches minus one
as we only need 1 port for both uplinks.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.
While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In shared FDB a single RDMA device can have representors that are
connected to two different eswitches. Use the right eswitch when
preparing the response to userspace.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no real value in bypassing IB/core APIs for creating standard
objects with standard types. The open-coded variant didn't have any
restrack task management calls and caused to such objects to be not
present when running rdmatoool.
Link: https://lore.kernel.org/r/f745590e5fb7d56f90fdb25f64ee3983ba17e1e4.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.
Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Starting from commit 2b1f747071 ("RDMA/core: Allow drivers to disable
restrack DB") the restrack is able to handle non-standard QP types either.
That change allows us to rewrite custom QP calls to their IB/core
counterparts, so we will use general QP creation flow even for the driver
QP types.
Link: https://lore.kernel.org/r/51682ab82298748941f38bd23ee3bf77ef1cab7b.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The dev->devr.mutex was intended to protect GSI QP pointer change in the
struct mlx5_ib_port_resources when it is accessed from the
pkey_change_work. However that pointer isn't changed during the runtime
and once IB/core adds MAD, it stays stable.
Link: https://lore.kernel.org/r/6e338c561033df20d92e1371fc6a7a0d93aad945.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the driver release flow, we are ensuring that notifier is disabled and
no new works can be added to pkey_change_handler. It means that we can
cancel that handler before destroying resources to make sure that our
unwind routine is symmetrical to the allocation one.
Link: https://lore.kernel.org/r/f2b1ea1bad952e4e7a48a6f731de9e0344986b29.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QP attributes that were supplied by IB/core already have all parameters
set when they are passed to the driver. The drivers are not supposed to
change anything in struct ib_qp_init_attr.
Fixes: 66d86e529d ("RDMA/hns: Add UD support for HIP09")
Link: https://lore.kernel.org/r/5987138875e8ade9aa339d4db6e1bd9694ed4591.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The call to internal QP creation function skips QP creation checks and
misses the addition of such device QPs to the restrack DB.
As a preparation to general allocation scheme, convert hns to use proper
API.
Link: https://lore.kernel.org/r/7b236c15f7d5abb368958297ac6962d8459cb824.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If hns_roce_cmd_use_events() fails then it means that the poll_sem is not
obtained, but the poll_sem is released in hns_roce_cmd_use_polling(), this
will cause an unlock problem.
This is the static checker warning:
drivers/infiniband/hw/hns/hns_roce_main.c:926 hns_roce_init()
error: double unlocked '&hr_dev->cmd.poll_sem' (orig line 879)
Event mode and polling mode are mutually exclusive and resources are
separated, so there is no need to process polling mode resources in event
mode.
The initial mode of cmd is polling mode, so even if cmd fails to switch to
event mode, it is not necessary to switch to polling mode.
Fixes: a389d016c0 ("RDMA/hns: Enable all CMDQ context")
Fixes: 3d50503b3b ("RDMA/hns: Optimize cmd init and mode selection for hip08")
Link: https://lore.kernel.org/r/1627887374-20019-1-git-send-email-liangwenpeng@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixing a typo that causes a cache entry to shrink immediately after adding
to it new MRs if the entry size exceeds the high limit. In doing so, the
cache misses its purpose to prevent the creation of new mkeys on the
runtime by using the cached ones.
Fixes: b9358bdbc7 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/fcb546986be346684a016f5ca23a0567399145fa.1627370131.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use -EINVAL return type to identify whether error is returned because of
"Out of MR resources" or any other error types.
Link: https://lore.kernel.org/r/20210729151732.30995-2-pkushwaha@marvell.com
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Link: https://lore.kernel.org/r/1626674454-56075-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Tested-by: Josh Fisher <josh.fisher@cornelisnetworks.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.
This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack. This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.
To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.
At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com
Suggested-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no counter for dmawait in AIP, which hampers debugging
performance issues.
Add the counter increment when the txq is queued.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210715160440.142451.8278.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky says:
====================
Add ConnectX DCS offload support
This patchset from Lior adds support of DCI stream channel (DCS) support.
DCS is an offload to SW load balancing of DC initiator work requests.
A single DC QP initiator (DCI) can be connected to only one target at the
time and can't start new connection until the previous work request is
completed.
This limitation causes to delays when the initiator process needs to
transfer data to multiple targets at the same time.
====================
* branch 'mlx5_dcs':
RDMA/mlx5: Add DCS offload support
RDMA/mlx5: Separate DCI QP creation logic
net/mlx5: Add DCS caps & fields support
DCS is an offload to SW load balancing of DC initiator work requests.
A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed. This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time. The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.
This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.
Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch isolates DCI QP creation logic to separate function, so this
change will reduce complexity when adding new features to DCI QP without
interfering with other QP types.
The code was copied from create_user_qp() while taking only DCI relevant bits.
Link: https://lore.kernel.org/r/b4530bdd999349c59691224f016ff1efb5dc3b92.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hardware stats API distinguishes between device and port statistics,
split the EFA stats accordingly instead of always dumping everything.
Link: https://lore.kernel.org/r/20210712105923.17389-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the returned value of the function irdma_setup_virt_qp is always 0,
remove the returned value check and change the returned type to void.
Link: https://lore.kernel.org/r/20210714031130.1511109-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the function irdma_set_hw_rsrc always returns zero, change the
returned type to void and remove all the related source code.
Link: https://lore.kernel.org/r/20210714031130.1511109-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a coverity warning about NULL pointer dereference:
Dereferencing "vsi", which is known to be "NULL".
Link: https://lore.kernel.org/r/20210708213521.438-1-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505164 ("Null pointer dereferences")
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the function irdma_sc_parse_fpm_commit_buf always returns 0, remove
the returned value check and change the returned type to void.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Link: https://lore.kernel.org/r/20210708064752.797520-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Majd Dibbiny <majd@nvidia.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following unused variable warning:
drivers/infiniband/hw/irdma/uk.c:934:6: warning: variable 'total_size' set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210707211455.2076-1-tatyana.e.nikolova@intel.com
Link: https://lkml.org/lkml/2021/7/1/726
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Statistical counters are not incrementing in some adapter versions with
newer FW. This is due to the stats context length mismatch between FW and
driver. Since the L2 driver updates the length correctly, use the stats
length from L2 driver while allocating the DMA'able memory and creating
the stats context.
Fixes: 9d6b648c31 ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
This PR contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that can do
ROCE. Otherwise this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide refcount_t
conversion
- Several series for the hns driver, more HIP09 HW capabilities, migration
to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
make the ib_port sysfs first-class, and overall use sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support
-----BEGIN PGP SIGNATURE-----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=wyqt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
The __assign_str macro has an unusual ending semicolon but the vast
majority of uses of the macro already have semicolon termination.
$ git grep -P '\b__assign_str\b' | wc -l
551
$ git grep -P '\b__assign_str\b.*;' | wc -l
480
Add semicolons to the __assign_str() uses without semicolon termination
and all the other uses without semicolon termination via additional defines
that are equivalent to __assign_str() with the eventual goal of removing
the semicolon from the __assign_str() macro definition.
Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/
Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Coverity reports a signed 32-bit overflow on "1 << pprm->pble_shift" when
used expression to compute bits_needed that expects 64bit, unsigned.
Fix this by using the 1ULL in the left shift operator and convert mem_size
to u64.
Link: https://lore.kernel.org/r/20210625162329.1654-3-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505157 ("Integer handling issues")
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The contents of user-space req object is used in array indexing in
irdma_handle_q_mem without checking for valid values.
Guard against bad input on each of these req object pages by limiting them
to number of pages that make up the region.
Link: https://lore.kernel.org/r/20210625162329.1654-2-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505160 ("TAINTED_SCALAR")
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The window selection field is necessary for congestion control of HIP09,
it is got from firmware and then filled into QPC. Some algorithms need it
to decide whether to limit the number of windows.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1624364163-44185-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
The kmap() used in the irdma CM driver is thread local. Therefore
kmap_local_page() is sufficient to use and may provide performance
benefits as well. kmap_local_page() will work with device dax and pgmap
protected pages.
Use kmap_local_page() instead of kmap().
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210622165622.2638628-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bit field rsvd1 in resp is not being initialized and garbage data is
being copied from the stack back to userspace via the ib_copy_to_udata
call. Fix this by setting the entire struct resp to zero; this will ensure
that further new bit fields in the future will be zero'd too.
Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 879740517d ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[jgg: remove extra zeroing]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of hard code the gid_table_len value, use the value from the
ib_query_port() attributes.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210620201503.67055-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iwmr->page_size stores the return from ib_umem_find_best_pgsz and maybe
zero when used in ib_umem_num_dma_blocks thus causing a divide by zero
error.
Fix this by erroring out of irdma_reg_user when 0 is returned from
ib_umem_find_best_pgsz.
Link: https://lore.kernel.org/r/20210622175232.439-3-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505149 ("Integer handling issues")
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The QP type has been checked in check_send_valid(), if it's not RC, it
will process the UD/GSI branch.
Link: https://lore.kernel.org/r/1624011020-16992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The process of flushing CQE can be encapsultated into a function, which
can reduce duplicate code.
Link: https://lore.kernel.org/r/1624011020-16992-9-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_init_qp_table() will only return 0, because this function does
not need to return a value, so it is modified to void type.
Link: https://lore.kernel.org/r/1624011020-16992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When query_qp is called by userspace, max_send_wr and max_send_sge are set
to 0 by the kernel driver. However, the userspace does not use these two
return values from the kernel driver, but uses its own calculated values.
So there is no need for special treatment.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some kernel ULPs need to use the return value of qp_init_attr, so add
member assignments for qp_init_attr.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A random value will be returned if the condition below is not met, so it
needs to be initialized.
Fixes: 9ea9a53ea9 ("RDMA/hns: Add mapped page count checking for MTR")
Link: https://lore.kernel.org/r/1624011020-16992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a non-inline WR reuses a WQE that was used for inline last time, the
remaining inline flag should be cleared.
Fixes: 62490fd5a8 ("RDMA/hns: Avoid unnecessary memset on WQEs in post_send")
Link: https://lore.kernel.org/r/1624011020-16992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into rdma.git for-next
Linux 5.13-rc7
Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, if the user asks for a real-time timestamp, the device will
return a free-running one, and the timestamp will be translated to
real-time in the user-space.
When the device supports only real-time timestamp and not free-running,
the creation of the QP will fail even though the user needs supported the
real-time one. To prevent this, we will return the real-time timestamp
directly from the device.
Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring array fields.
Use the ether_addr_copy() helper instead, as already done for smac.
Link: https://lore.kernel.org/r/20210616203744.1248551-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Compilation with W=1 produces warnings similar to the below.
drivers/infiniband/ulp/ipoib/ipoib_main.c:320: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
All such occurrences were found with the following one line
git grep -A 1 "\/\*\*" drivers/infiniband/
Link: https://lore.kernel.org/r/e57d5f4ddd08b7a19934635b44d6d632841b9ba7.1623823612.git.leonro@nvidia.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com> #rtrs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch xrcd index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-7-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch pd index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch mtpt index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Round-robin (RR) is no longer used in the allocation of the bitmap table,
and all the function input parameters that use this mechanism are
BITMAP_NO_RR. The code that defines and uses the RR needs to be deleted.
Link: https://lore.kernel.org/r/1623325814-55737-4-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_bitmap_free_range() is only called inside hns_roce_bitmap_free(),
and the input parameter "cnt" is set to a constant 1. In addition, the
driver does not use alloc_range scenarios, so free_range does not need to
exist.
Link: https://lore.kernel.org/r/1623325814-55737-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fill all QPC fileds with hr_reg_*() instead of roce_set_*(). SQPN is used
for HIP08 ES only, it should be removed.
Link: https://lore.kernel.org/r/1624262443-24528-6-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid to do bitwise operations on a boolean value, add a new
register interface to avoid sparse comlaint about "dubious: x & !y" when
calling hr_reg_write(ctx, field, !!val).
Fixes: dc50477440 ("RDMA/hns: Use new interface to set MPT related fields")
Fixes: 495c24808c ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC")
Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GCC may reports an running time assert error when a value calculated from
ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP:
include/linux/compiler_types.h:328:38: error: call to
'__compiletime_assert_1524' declared with attribute error: FIELD_PREP:
value too large for the field
So a check is added about whether integer mtu from ib_mtu_enum_to_int() is
negative to avoid this warning.
Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use "!!" before "eq->eqe_size ==
HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y".
Fixes: 782832f254 ("RDMA/hns: Simplify the function config_eqc()")
Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Relaxed Ordering is a capability that can only benefit users that support
it. All kernel ULPs should support Relaxed Ordering, as they are designed
to read data only after observing the CQE and use the DMA API correctly.
Hence, implicitly enable Relaxed Ordering by default for MR transfers in
kernel ULPs.
Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both of HIP08 and HIP09 require the extended doorbell information to be
cleared before being used.
Fixes: 6b63597d35 ("RDMA/hns: Add TSQ link table support")
Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hfi1 should not be creating a mess of kobjects to attach to the port
kobject - this is all attributes. The proper API is to create an
attribute_group list and create it against the port's kobject.
Link: https://lore.kernel.org/r/cbe0ccb6175dd22274359b6ad803a37435a70e91.1623427137.git.leonro@nvidia.com
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qib should not be creating a mess of kobjects to attach to the port
kobject - this is all attributes. The proper API is to create an
attribute_group list and create it against the port's kobject.
Link: https://lore.kernel.org/r/911e0031e1ed495b0006e8a6efec7b67a702cd5e.1623427137.git.leonro@nvidia.com
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is being used to implement both the port and device global stats,
which is causing some confusion in the drivers. For instance EFA and i40iw
both seem to be misusing the device stats.
Split it into two ops so drivers that don't support one or the other can
leave the op NULL'd, making the calling code a little simpler to
understand.
Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All functions of HIP09's ROCEE share on-chip resources for all QPs, the
driver needs configure the resource index and number for each function
during the init stage.
Link: https://lore.kernel.org/r/1622541427-42193-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib_bind_slave_port() doesn't remove multiport device from the
unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced
flow caused to the situation where mlx5_ib_unaffiliated_port_list was
changed during iteration.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/2726e6603b1e6ecfe76aa5a12a063af72173bcf7.1622477058.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whenever users provided affinity for an EQ creation request, map the
EQ to a matching IRQ.
Matching IRQ=IRQ with the same affinity and type (completion/control) of
the EQ created.
This mapping is being done in agressive dedicated IRQ allocation scheme,
which described bellow.
First, we check whether there is a matching IRQ that his min threshold
is not exhausted.
- min_eqs_threshold = 3 for control EQ.
- min_eqs_threshold = 1 for completion EQ.
In case no matching IRQ was found, try to request a new IRQ.
In case we can't request a new IRQ, reuse least-used matching IRQ.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The users of EQ are running their code on different CPUs and with
various affinity patterns. Move the cpumask setting close to their
actual usage.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The level1 PBL info address is stored as u64. This requires casting
through a uinptr_t before used as a pointer type.
And this leads to sparse warning such as this when uinptr_t is missing:
drivers/infiniband/hw/irdma/hw.c: In function 'irdma_destroy_virt_aeq':
drivers/infiniband/hw/irdma/hw.c:579:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
579 | dma_addr_t *pg_arr = (dma_addr_t *)aeq->palloc.level1.addr;
This can be fixed using an intermediate uintptr_t, but rather it is better
to fix the structure irdm_pble_info to store the address as u64* and the
VA it is assigned in irdma_chunk as a void*. This greatly reduces the
casting on this address.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20210609234924.938-1-shiraz.saleem@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.
However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.
[exception RIP: init_cq_frag_buf+103]
[ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
[ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
[ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
[ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
[ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
[ffff9f799ddcbec8] kthread at ffffffffa66c5da1
[ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd
Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.
Fixes: 388ca8be00 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Validate port value provided by the user and with that remove no longer
needed validation by the driver. The missing check in the mlx5_ib driver
could cause to the below oops.
Call trace:
_create_flow_rule+0x2d4/0xf28 [mlx5_ib]
mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib]
ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs]
ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs]
do_vfs_ioctl+0xd0/0xaf0
ksys_ioctl+0x84/0xb4
__arm64_sys_ioctl+0x28/0xc4
el0_svc_common.constprop.3+0xa4/0x254
el0_svc_handler+0x84/0xa0
el0_svc+0x10/0x26c
Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a)
Fixes: 436f2ad05a ("IB/core: Export ib_create/destroy_flow through uverbs")
Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.
The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.
For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use list_last_entry and list_first_entry instead of using prev and next
pointers.
Link: https://lore.kernel.org/r/20210608211415.680-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow creating FDB steering rules only when in switchdev mode.
The only software model where a userspace application can manipulate
FDB entries is when it manages the eswitch. This is only possible in
switchdev mode where we expose a single RDMA device with representors
for all the vports that are connected to the eswitch.
Fixes: 52438be441 ("RDMA/mlx5: Allow inserting a steering rule to the FDB")
Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using list_move() instead of list_del() + list_add().
Link: https://lore.kernel.org/r/20210608031041.2820429-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The refcount_t API will WARN on underflow and overflow of a reference
counter, and avoid use-after-free risks.
Link: https://lore.kernel.org/r/1622194663-2383-12-git-send-email-liweihang@huawei.com
Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a typo in the returned error code sign from irdma_modify_qp()
when the attr_mask is not supported - Fix it.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210607221543.254144-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable val is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20210605131347.26293-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A single statement is indented one level too deeply, clean up the
code by removing the extraneous tab.
Link: https://lore.kernel.org/r/20210605130400.25987-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The shifting of the u8 integer info->map[i] the left will be promoted
to a 32 bit signed int and then sign-extended to a u64. In the event
that the top bit of the u8 is set then all then all the upper 32 bits
of the u64 end up as also being set because of the sign-extension.
Fix this by casting the u8 values to a u64 before the left shift. This
Link: https://lore.kernel.org/r/20210605122059.25105-1-colin.king@canonical.com
Addresses-Coverity: ("Unitentional integer overflow / bad shift operation")
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The error code is missing in this code scenario so 0 will be returned. Add
the error code '-EINVAL' to the return value 'ret'.
Eliminates the follow smatch warning:
drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'.
Link: https://lore.kernel.org/r/1622545669-20625-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.
Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.
After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.
Fixes: 52033cfb5a ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In a fork scenario, the parent and child can have same virtual address and
also share the uverbs fd. That causes to the list_for_each_entry search
return same doorbell physical page for all processes, even though that
page has been COW' or copied.
This patch takes the mm_struct into consideration during search, to make
sure that VA's belonging to different processes are not intermixed.
Resolves the malfunction of uverbs after fork in some specific cases.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/feacc23fe0bc6e1088c6824d5583798745e72405.1622726212.git.leonro@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Shiraz Saleem says:
====================
Add Intel Ethernet Protocol Driver for RDMA (irdma)
The following patch series introduces a unified Intel Ethernet Protocol
Driver for RDMA (irdma) for the X722 iWARP device and a new E810 device
which supports iWARP and RoCEv2. The irdma module replaces the legacy
i40iw module for X722 and extends the ABI already defined for i40iw. It is
backward compatible with legacy X722 rdma-core provider (libi40iw).
X722 and E810 are PCI network devices that are RDMA capable. The RDMA
block of this parent device is represented via an auxiliary device
exported to 'irdma' using the core auxiliary bus infrastructure recently
added for 5.11 kernel. The parent PCI netdev drivers 'i40e' and 'ice'
register auxiliary RDMA devices with private data/ops encapsulated that
bind to auxiliary drivers registered in irdma module.
Currently, default is RoCEv2 for E810. Runtime support for protocol switch
to iWARP will be made available via devlink in a future patch.
====================
Link: https://lore.kernel.org/r/20210602205138.889-1-shiraz.saleem@intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'irdma':
RDMA/irdma: Update MAINTAINERS file
RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw
RDMA/irdma: Add ABI definitions
RDMA/irdma: Add dynamic tracing for CM
RDMA/irdma: Add miscellaneous utility definitions
RDMA/irdma: Add user/kernel shared libraries
RDMA/irdma: Add RoCEv2 UD OP support
RDMA/irdma: Implement device supported verb APIs
RDMA/irdma: Add PBLE resource manager
RDMA/irdma: Add connection manager
RDMA/irdma: Add QoS definitions
RDMA/irdma: Add privileged UDA queue implementation
RDMA/irdma: Add HMC backing store setup functions
RDMA/irdma: Implement HW Admin Queue OPs
RDMA/irdma: Implement device initialization definitions
RDMA/irdma: Register auxiliary driver and implement private channel OPs
i40e: Register auxiliary devices to provide RDMA
i40e: Prep i40e header for aux bus conversion
ice: Register auxiliary device to provide RDMA
ice: Implement iidc operations
ice: Initialize RDMA support
iidc: Introduce iidc.h
i40e: Replace one-element array with flexible-array member
Add Kconfig and Makefile to build irdma driver.
Remove i40iw driver and add an alias in irdma.
Remove legacy exported symbols i40e_register_client
and i40e_unregister_client from i40e as they are no
longer used.
irdma is the replacement driver that supports X722.
Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Building the WQE descriptors for different verb
operations are similar in kernel and user-space.
Add these shared libraries.
Link: https://lore.kernel.org/r/20210602205138.889-12-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the header, data structures and functions
to populate the WQE descriptors and issue the
Control QP commands that support RoCEv2 UD operations.
Link: https://lore.kernel.org/r/20210602205138.889-11-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement device supported verb APIs. The supported APIs
vary based on the underlying transport the ibdev is
registered as (i.e. iWARP or RoCEv2).
Link: https://lore.kernel.org/r/20210602205138.889-10-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement a Physical Buffer List Entry (PBLE) resource manager
to manage a pool of PBLE HMC resource objects.
Link: https://lore.kernel.org/r/20210602205138.889-9-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add definitions for managing the RDMA HW work scheduler (WS) tree.
A WS node is created via a control QP operation with the bandwidth
allocation, arbitration scheme, and traffic class of the QP specified.
The Qset handle returned associates the QoS parameters for the QP.
The Qset is registered with the LAN and an equivalent node is created
in the LAN packet scheduler tree.
Link: https://lore.kernel.org/r/20210602205138.889-7-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW uses host memory as a backing store for a number of
protocol context objects and queue state tracking.
The Host Memory Cache (HMC) is a component responsible for
managing these objects stored in host memory.
Add the functions and data structures to manage the allocation
of backing pages used by the HMC for the various objects
Link: https://lore.kernel.org/r/20210602205138.889-5-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The driver posts privileged commands to the HW
Admin Queue (Control QP or CQP) to request administrative
actions from the HW. Implement create/destroy of CQP
and the supporting functions, data structures and headers
to handle the different CQP commands
Link: https://lore.kernel.org/r/20210602205138.889-4-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Register auxiliary drivers which can attach to auxiliary RDMA
devices from Intel PCI netdev drivers i40e and ice. Implement the private
channel ops, and register net notifiers.
Link: https://lore.kernel.org/r/20210602205138.889-2-shiraz.saleem@intel.com
[flexible array transformation]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx4 and mlx5 implemented differently the WQ input checks. Instead of
duplicating mlx4 logic in the mlx5, let's prepare the input in the central
place.
The mlx5 implementation didn't check for validity of state input. It is
not real bug because our FW checked that, but still worth to fix.
Fixes: f213c05272 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/ac41ad6a81b095b1a8ad453dcf62cf8d3c5da779.1621413310.git.leonro@nvidia.com
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tony Nguyen says:
====================
iwl-next Intel Wired LAN Driver Updates 2021-06-01
This pull request is targeting net-next and rdma-next branches.
These patches have been reviewed by netdev and rdma mailing lists[1].
This series adds RDMA support to the ice driver for E810 devices and
converts the i40e driver to use the auxiliary bus infrastructure
for X722 devices. The PCI netdev drivers register auxiliary RDMA devices
that will bind to auxiliary drivers registered by the new irdma module.
[1] https://lore.kernel.org/netdev/20210520143809.819-1-shiraz.saleem@intel.com/
---
v3:
- ice_aq_add_rdma_qsets(), ice_cfg_vsi_rdma(), ice_[ena|dis]_vsi_rdma_qset(),
and ice_cfg_rdma_fltr() no longer return ice_status
- Remove null check from ice_aq_add_rdma_qsets()
v2:
- Added patch 'i40e: Replace one-element array with flexible-array
member'
Changes since linked review (v6):
- Removed unnecessary checks in i40e_client_device_register() and
i40e_client_device_unregister()
- Simplified the i40e_client_device_register() API
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The capbability configurations of PFs and VFs are coupled. Decoupling them
by abstracting some functions and reorganizing the configuration process.
Link: https://lore.kernel.org/r/1621860428-58009-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since ib_get_len() only has one caller, move it from a header file into a
.c file. Additionally, remove the superfluous u16 cast. That cast was
introduced by commit 7dafbab375 ("IB/hfi1: Add functions to parse BTH/IB
headers").
Link: https://lore.kernel.org/r/20210524041211.9480-2-bvanassche@acm.org
Cc: Don Hiatt <don.hiatt@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HEM page size for QPC timer and CQC timer is always 4K and there's no
need to calculate a different size by the hns driver, otherwise the ROCEE
may access an invalid address.
Fixes: 719d13415f ("RDMA/hns: Remove duplicated hem page size config code")
Link: https://lore.kernel.org/r/1621589395-2435-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the hem_list_alloc_root_bt() into serval small functions to make the
code flow more clear.
Link: https://lore.kernel.org/r/1621589395-2435-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The base address table is allocated by dma allocator, and the size is
always aligned to PAGE_SIZE. If a fixed size is used to allocate the
table, the number of base address entries stored in the table will be
smaller than that can actually stored.
Link: https://lore.kernel.org/r/1621589395-2435-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent
out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCuy2gACgkQMUZtbf5S
IruE5BAAhihia5EaiV71Bz/Cqr/d+osv5u283riKT8kBft0bWFVFFnT3iweWyR0/
5X+bB6zmr80Cuqh45ZeYyq+zJtiAAlsbD5hqBIGdMriSWLxciNKjVJRzuEjuqnek
USMW/LqGyf4NhmLogmQKpx8XcKSG7VYuK7vPrsH8us1dL5vIssceIXn8R9Dzj9NN
P77K5Z+Oka8XQJgetNLxR3tDAM/92RwIshotkhJbRwgiUvzb+wbnrnSOAZCIPgku
ydJyOxOklln1Sx07SejgzEl33ri0CkioDPThBWpOn7Mu0JrYKukXPKludoZcRYuJ
2jNLYfbH0ZS5EkOfk89h7j7MDoAJMUK72M+S1w5DEYz6eH2EjhAq9noZ6E1iQH+U
9vfoIvQjPh6Zhyk5QeM4dpt0cvR7rSElXkLVxo/x0dSBAi2rIng1bKeCUtv2J689
CsoD0oghtEzvUTYVxY6iNr15OFGl6KsZv4tVQ709gGA36sDlK8ozGbJH5WReobBl
f8H2WJlj2tVW5V75yUoio8TumDw34yk/5xlJFzm9GOwkqBrUcqOraHtHdUIsa4qr
KbELQQ9QVt4zYdLAiWy5BL/QLycp0ibmA1IB8W1bxEVSK1JXzREHzPxv85KOfZkn
8+vzNHmk2PEZYYsExiEykc5jXKOCPs8L0rJ6p4OverlbpDZcwIg=
=peMK
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in struct
i40e_qvlist_info instead of one-element array, and use the struct_size()
helper.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change all the places in the mlx5_ib driver to take the qp type from the
mlx5_ib_qp struct, except the QP initialization flow. It will ensure that
we check the right QP type also for vendor specific QPs.
Link: https://lore.kernel.org/r/b2e16cd65b59cd24fa81c01c7989248da44e58ea.1621413899.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hcr_mutex was used to serialize mailbox post. Now that mailbox
supports concurrency, this variable is no longer useful.
Fixes: a389d016c0 ("RDMA/hns: Enable all CMDQ context")
Link: https://lore.kernel.org/r/1621482876-35780-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The CRQ of CMDQ is unused, so remove code about it.
Link: https://lore.kernel.org/r/1621482876-35780-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The same name represents opposite meanings in new/old driver, it is hard
to maintain, so rename them to PI/CI.
Link: https://lore.kernel.org/r/1621482876-35780-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The timeout link table works in HIP08 ES version and the hns driver only
support the CS version for HIP08, so delete the related code. Then
simplify the buffer allocation for link table to make the code more
readable.
Link: https://lore.kernel.org/r/1621481751-27375-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The result of container_of() operations is never NULL unless the first
element of the embedding structure is extracted. This is either not the
case here, or the pointer passed to container_of() is known to be not
NULL. The NULL checks are therefore unnecessary and misleading.
Remove them.
The channges in this patch were made automatically with the following
Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Link: https://lore.kernel.org/r/20210514153606.1377119-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The old version of ib_umem_get() need these udata as a parameter but now
they are unnecessary.
Fixes: c320e527e1 ("IB: Allow calls to ib_umem_get from kernel ULPs")
Link: https://lore.kernel.org/r/1620807142-39157-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The old version of ib_umem_get() need these udata as a parameter but now
they are unnecessary.
Fixes: c320e527e1 ("IB: Allow calls to ib_umem_get from kernel ULPs")
Link: https://lore.kernel.org/r/1620807142-39157-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The old version of ib_umem_get() need these udata as a parameter but now
they are unnecessary.
Fixes: c320e527e1 ("IB: Allow calls to ib_umem_get from kernel ULPs")
Link: https://lore.kernel.org/r/1620807142-39157-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new bit in the comp_mask is needed to mark that kernel supports
SQD2RTS transition for the modify QP command.
Link: https://lore.kernel.org/r/7ce705fedac1b2b8e3a2f4013e04244dc5946344.1620641808.git.leonro@nvidia.com
Reviewed-by: Evgenii Kochetov <evgeniik@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The transition of the QP state from SQD to RTS is allowed by the IB
specification. The hardware also supports that, but it is not
implemented in mlx5_ib.
This commit adds SQD2RTS command to the modify QP in mlx5_ib to support
the missing feature. The feature is required by the signature pipelining
API that will be added to rdma-core.
Link: https://lore.kernel.org/r/ab4876360bfba0e9d64a5e8599438e32e0cb351e.1620641808.git.leonro@nvidia.com
Reviewed-by: Evgenii Kochetov <evgeniik@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When executing DEVX command to query QP object, we need to take the QP
type from the mlx5_ib_qp struct which hold the driver specific QP types as
well, such as DC.
Fixes: 34613eb1d2 ("IB/mlx5: Enable modify and query verbs objects via DEVX")
Link: https://lore.kernel.org/r/6eee15d63f09bb70787488e0cf96216e2957f5aa.1621413654.git.leonro@nvidia.com
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_core_dev holds pointer to static profile, hence when the
log_max_qp of the profile is override by some device, then it
effect all other mlx5 devices that share the same profile.
Fix it by having a profile instance for every mlx5 device.
Fixes: 883371c453 ("net/mlx5: Check FW limitations on log_max_qp before setting it")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
Fixes: d69a24e036 ("IB/mlx5: Move IB event processing onto a workqueue")
Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the complaint from smatch by verifing that the user requested DM
operation is not greater than 31.
divers/infiniband/hw/mlx5/dm.c:220 mlx5_ib_handler_MLX5_IB_METHOD_DM_MAP_OP_ADDR()
error: undefined (user controlled) shift '(((1))) << op'
Fixes: cea85fa5db ("RDMA/mlx5: Add support in MEMIC operations")
Link: https://lore.kernel.org/r/458b1d7710c3cf01360c8771893f483665569786.1620711734.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The result of an expression consisting of a single relational operator is
already of the bool type and does not need to be evaluated explicitly.
No functional change.
Link: https://lore.kernel.org/r/20210510120635.3636-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Variable 'ret' is set to the rerurn value of function
mlx5_mr_cache_alloc() but this value is never read as it is overwritten
with a new value later on, hence it is a redundant assignment and can be
removed
Clean up the following clang-analyzer warning:
drivers/infiniband/hw/mlx5/odp.c:421:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores]
Fixes: e6fb246cca ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/1620296001-120406-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Even in the case of heavy load, direct WQE can still be posted. The
hardware will decide whether to drop the DWQE or not. Thus, the limit
needs to be removed.
Fixes: 01584a5edc ("RDMA/hns: Add support of direct wqe")
Link: https://lore.kernel.org/r/1619593950-29414-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull another simple_recursive_removal() update from Al Viro:
"I missed one case when simple_recursive_removal() was introduced"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qib_fs: switch to simple_recursive_removal()
This is significantly bug fixes and general cleanups. The noteworthy new
features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and
qib
- Quite a few general cleanups on spelling, error handling, static checker
detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool
-----BEGIN PGP SIGNATURE-----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=vsXA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
Variable 'ret' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant assignment
and can be removed.
Clean up the following clang-analyzer warning:
drivers/infiniband/hw/qib/qib_sd7220.c:690:2: warning: Value stored to
'ret' is never read [clang-analyzer-deadcode.DeadStores]
Link: https://lore.kernel.org/r/1619692940-104771-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
In bnxt_qplib_alloc_res, it calls bnxt_qplib_alloc_dpi_tbl(). Inside
bnxt_qplib_alloc_dpi_tbl, dpit->dbr_bar_reg_iomem is freed via
pci_iounmap() in unmap_io error branch. After the callee returns err code,
bnxt_qplib_alloc_res calls
bnxt_qplib_free_res()->bnxt_qplib_free_dpi_tbl() in the fail branch. Then
dpit->dbr_bar_reg_iomem is freed in the second time by pci_iounmap().
My patch set dpit->dbr_bar_reg_iomem to NULL after it is freed by
pci_iounmap() in the first time, to avoid the double free.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20210426140614.6722-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable rcd is being assigned a value from a calculation however the
variable is never read, so this redundant variable can be removed.
Cleans up the following clang-analyzer warning:
drivers/infiniband/hw/hfi1/affinity.c:986:3: warning: Value stored to
'rcd' is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1619346696-46300-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
Expose a non standard query port via IOCTL that will be used to expose
port attributes that are specific to mlx5 devices.
The new interface receives a port number to query and returns a structure
that contains the available attributes for that port. This will be used
to fill the gap between pure DEVX use cases and use cases where a kernel
needs to inform userspace about various kernel driver configurations that
userspace must use in order to work correctly.
Flags is used to indicate which fields are valid on return.
MLX5_IB_UAPI_QUERY_PORT_VPORT:
The vport number of the queered port.
MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID:
The VHCA ID of the vport of the queered port.
MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX:
The vport's RX ICM address used for sw steering.
MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX:
The vport's TX ICM address used for sw steering.
MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0:
The metadata used to tag egress packets of the vport.
MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID:
The E-Switch owner vhca id of the vport.
Link: https://lore.kernel.org/r/6e2ef13e5a266a6c037eb0105eb1564c7bb52f23.1618743394.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently when GID is deleted, it zero out all the fields of the RoCE
address in the SET_ROCE_ADDRESS command for a specified index.
roce_version = 0 means RoCEv1 in the SET_ROCE_ADDRESS command.
This assumes that device has RoCEv1 always enabled which is not always
correct. For example Subfunction does not support RoCEv1.
Due to this assumption a previously added RoCEv2 GID is always deleted as
RoCEv1 GID. This results in a below syndrome:
mlx5_core.sf mlx5_core.sf.4: mlx5_cmd_check:777:(pid 4256): SET_ROCE_ADDRESS(0x761) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x12822d)
Hence set the right RoCE version during GID deletion provided by the core.
Link: https://lore.kernel.org/r/d3f54129c90ca329caf438dbe31875d8ad08d91a.1618753425.git.leonro@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When i40iw_hmc_sd_one fails, chunk is freed without the deletion of chunk
entry in the PBLE info list.
Fix it by adding the chunk entry to the PBLE info list only after
successful addition of SD in i40iw_hmc_sd_one.
This fixes a static checker warning reported here:
https://lore.kernel.org/linux-rdma/YHV4CFXzqTm23AOZ@mwanda/
Fixes: 9715830157 ("i40iw: add pble resource files")
Link: https://lore.kernel.org/r/20210416002104.323-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
missing qpid increment leads to skipping few qpids while allocating QP.
This eventually leads to adapter running out of qpids after establishing
fewer connections than it actually supports.
Current patch increments the qpid correctly.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20210415151422.9139-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of manually messing with parent driver module reference counting
rely on export symbol mechanism to ensure that proper probe/remove chain
is performed.
Link: https://lore.kernel.org/r/20210401065715.565226-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Convert indirect probe call to its direct equivalent to create a symbol
link between RDMA and netdev modules. This will give us an ability to
remove custom module reference counting that doesn't belong to the driver.
Link: https://lore.kernel.org/r/20210401065715.565226-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "select" kconfig keyword provides reverse dependency, however it
doesn't check that selected symbol meets its own dependencies. Usually
"select" is used for non-visible symbols, so instead of trying to keep
dependencies in sync with BNXT ethernet driver, simply "depends on" it,
like Kconfig documentation suggest.
* CONFIG_PCI is already required by BNXT
* CONFIG_NETDEVICES and CONFIG_ETHERNET are needed to chose BNXT
Link: https://lore.kernel.org/r/20210401065715.565226-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce the VF support by adding code changes to allow VF PCI device
initialization, assgining the reserved resource of the PF to the active
VFs, setting the default abilities, applying the interruptions, resetting
and reducing the default QP/GID number to aovid exceeding the hardware
limitation.
Link: https://lore.kernel.org/r/1617715514-29039-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch parameters of all functions belong to a PF should be set including
VFs.
Link: https://lore.kernel.org/r/1617715514-29039-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Query the resource including EQC/SMAC/SGID from the firmware in the PF and
distribute fairly among all the functions belong to the PF.
Link: https://lore.kernel.org/r/1617715514-29039-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Query how many functions are supported by the PF from the FW and store it
in the hns_roce_dev structure which will be used to support the
configuration of virtual functions.
Link: https://lore.kernel.org/r/1617715514-29039-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use hr_reg_write/read() to simplify codes about configuring function's
resource. And because the design of PF/VF fields is same, they can be
defined only once.
Link: https://lore.kernel.org/r/1617715514-29039-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Maor Gottlieb says:
====================
This series from Maor extends MEMIC to support atomic operations from the
host in addition to already supported regular read/write.
====================
* 'memic_ops':
RDMA/mlx5: Expose UAPI to query DM
RDMA/mlx5: Add support in MEMIC operations
RDMA/mlx5: Add support to MODIFY_MEMIC command
RDMA/mlx5: Re-organize the DM code
RDMA/mlx5: Move all DM logic to separate file
RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number
net/mlx5: Add MEMIC operations related bits
Expose UAPI to query MEMIC DM, this will let user space application
that didn't allocate the DM but has access to by owning the matching
command FD to retrieve its information.
Link: https://lore.kernel.org/r/20210411122924.60230-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
MEMIC buffer, in addition to regular read and write operations, can
support atomic operations from the host.
Introduce and implement new UAPI to allocate address space for MEMIC
operations such as atomic. This includes:
1. Expose new IOCTL for request mapping of MEMIC operation.
2. Hold the operations address in a list, so same operation to same DM
will be allocated only once.
3. Manage refcount on the mlx5_ib_dm object, so it would be keep valid
until all addresses were unmapped.
Link: https://lore.kernel.org/r/20210411122924.60230-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add two functions to allocate and deallocate MEMIC operations
by using the MODIFY_MEMIC command.
Link: https://lore.kernel.org/r/20210411122924.60230-6-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
1. Inline the checks from check_dm_type_support() into their
respective allocation functions.
2. Fix use after free when driver fails to copy the MEMIC address to the
user by moving the allocation code into their respective functions,
hence we avoid the explicit call to free the DM in the error flow.
3. Split mlx5_ib_dm struct to memic and icm proper typesafety
throughout.
Fixes: dc2316eba7 ("IB/mlx5: Fix device memory flows")
Link: https://lore.kernel.org/r/20210411122924.60230-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move all device memory related code to a separate file.
Link: https://lore.kernel.org/r/20210411122924.60230-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All other users of the dummy netdevice embed the netdev in other
structures:
init_dummy_netdev(&mal->dummy_dev);
init_dummy_netdev(ð->dummy_dev);
init_dummy_netdev(&ar->napi_dev);
init_dummy_netdev(&irq_grp->napi_ndev);
init_dummy_netdev(&wil->napi_ndev);
init_dummy_netdev(&trans_pcie->napi_dev);
init_dummy_netdev(&dev->napi_dev);
init_dummy_netdev(&bus->mux_dev);
The AIP and VNIC implementation turns that model inside out and used a
kfree() to free what appears to be a netdev struct when in reality, it is
a struct that enbodies the rx state as well as the dummy netdev used to
support napi_poll across disparate receive contexts. The relationship is
infered by the odd allocation:
const int netdev_size = sizeof(*dd->dummy_netdev) +
sizeof(struct hfi1_netdev_priv);
<snip>
dd->dummy_netdev = kcalloc_node(1, netdev_size, GFP_KERNEL, dd->node);
Correct the issue by:
- Correctly naming the alloc and free functions
- Renaming hfi1_netdev_priv to hfi1_netdev_rx
- Replacing dd dummy_netdev with a netdev_rx pointer
- Embedding the net_device in hfi1_netdev_rx
- Moving the init_dummy_netdev to the alloc routine
- Adjusting wrappers to fit the new model
Fixes: 6991abcb99 ("IB/hfi1: Add functions to receive accelerated ipoib packets")
Link: https://lore.kernel.org/r/1617026056-50483-11-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As a flush operation is implemented inside destroy_workqueue(), there is
no need to do flush operation before.
Fixes: bfcc681bd0 ("IB/hns: Fix the bug when free mr")
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1618305087-30799-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Link: https://lore.kernel.org/r/20210409095147.2294269-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20210408113137.97202-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210408113140.103032-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 82af6d19d8 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20210408113135.92165-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Saeed Mahameed says:
====================
This pr contains changes from mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.
1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/
2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/
From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.
From Mikhael, Remove unused struct field
From Saeed, Cleanup W=1 prototype warning
From Zheng, Esw related cleanup
From Tariq, User order-0 page allocation for EQs
====================
* mlx5-next:
net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
net/mlx5: Dynamically assign MSI-X vectors count
net/mlx5: Add dynamic MSI-X capabilities bits
PCI/IOV: Add sysfs MSI-X vector assignment interface
net/mlx5: Use order-0 allocations for EQs
net/mlx5: Add IFC bits needed for single FDB mode
net/mlx5: E-Switch, Refactor send to vport to be more generic
RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
net/mlx5: E-Switch, Add eswitch pointer to each representor
net/mlx5: E-Switch, Add match on vhca id to default send rules
net/mlx5: Remove unused mlx5_core_health member recover_work
net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
net/mlx5: Cleanup prototype warning
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-next 2021-04-09
This pr contains changes from mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.
1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/
2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/
From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.
From Mikhael, Remove unused struct field
From Saeed, Cleanup W=1 prototype warning
From Zheng, Esw related cleanup
From Tariq, User order-0 page allocation for EQs
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
net/mlx5: Dynamically assign MSI-X vectors count
net/mlx5: Add dynamic MSI-X capabilities bits
PCI/IOV: Add sysfs MSI-X vector assignment interface
net/mlx5: Use order-0 allocations for EQs
net/mlx5: Add IFC bits needed for single FDB mode
net/mlx5: E-Switch, Refactor send to vport to be more generic
RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
net/mlx5: E-Switch, Add eswitch pointer to each representor
net/mlx5: E-Switch, Add match on vhca id to default send rules
net/mlx5: Remove unused mlx5_core_health member recover_work
net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
net/mlx5: Cleanup prototype warning
====================
Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Replace BUILD_BUG_ON_ZERO() with BUILD_BUG_ON() to avoid sparse
complaining "restricted __le32 degrades to integer".
Link: https://lore.kernel.org/r/1617354454-47840-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A field to distuiguish basic SRQ from XRC SRQ in SRQC and a field in QPC
to determine whether a QP is XRC TGT QP or XRC INI QP are missing.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/1617354454-47840-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some structure members in hns_roce_hw have never been used and need to be
deleted.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: b156269d88 ("RDMA/hns: Add modify CQ support for hip08")
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1617354454-47840-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The register value related to the eq interrupt depends only on
enable_flag, so the redundant condition judgment is deleted.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1617354454-47840-4-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When querying QP, the ULPs should be informed of the max length of inline
data supported by the hardware.
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/1617354454-47840-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use ratelimited print in mbox and cmq. And print mailbox operation if
mailbox fails because it's useful information for the user.
Link: https://lore.kernel.org/r/1617262341-37571-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add error code definition according to the return code from firmware to
help find out more detailed reasons why a command fails to be sent.
Link: https://lore.kernel.org/r/1617262341-37571-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix error of cmd's context number calculation algorithm to enable all of
32 cmd entries and support 32 concurrent accesses.
Link: https://lore.kernel.org/r/1617262341-37571-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/20210407154900.3486268-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To update xlt (during mlx5_ib_reg_user_mr()), the driver can request up to
1 MB (order-8) memory, depending on the size of the MR. This costly
allocation can sometimes take very long to return (a few seconds). This
causes the calling application to hang for a long time, especially when
the system is fragmented. To avoid these long latency spikes, the calls
the higher order allocations need to fail faster in case they are not
available.
In order to acheive this we need __GFP_NORETRY flag in the gfp_mask before
during fetching the free pages. Allow the algorithm to automatically fall
back to smaller page sizes.
Link: https://lore.kernel.org/r/1617425635-35631-1-git-send-email-praveen.kannoju@oracle.com
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the unused function sdma_iowait_schedule().
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/1617026791-89997-1-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code currently assumes that the mmu_notifier struct
embedded in mmu_rb_handler only contains two fields.
There are now extra fields:
struct mmu_notifier {
struct hlist_node hlist;
const struct mmu_notifier_ops *ops;
struct mm_struct *mm;
struct rcu_head rcu;
unsigned int users;
};
Given that there in no init for the mmu_notifier, a kzalloc() should
be used to insure that any newly added fields are given a predictable
initial value of zero.
Fixes: 06e0ffa693 ("IB/hfi1: Re-factor MMU notification code")
Link: https://lore.kernel.org/r/1617026056-50483-9-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Adam Goldman <adam.goldman@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces that were vital in isolating an issue with pq waitlist in
commit fa8dac3968 ("IB/hfi1: Fix another case where pq is left on
waitlist")
Link: https://lore.kernel.org/r/1617026056-50483-8-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hfi1_ipoib_send() directly calls hfi1_ipoib_send_dma() with no value add.
Fix by renaming hfi1_ipoib_send_dma() to hfi1_ipoib_send().
Link: https://lore.kernel.org/r/1617026056-50483-6-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The call is from an ISR context and napi_schedule_irqoff() can be used.
Change the call to the more efficient type.
Link: https://lore.kernel.org/r/1617026056-50483-5-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The completion ring for tx is using the wrong size to size the ring,
oversizing the ring by two orders of magniture.
Correct the allocation size and use kcalloc_node() to allocate the ring.
Fix mistaken GFP defines in similar allocations.
Link: https://lore.kernel.org/r/1617026056-50483-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current rdma_netdev handling in ipoib hooks the tx_timeout handler,
but prints out a totally useless message that prevents effective debugging
especially when multiple transmit queues are being used.
Add a tx_timeout rdma_netdev hook and implement the callback in the hfi1
to print additional information.
The existing non-helpful message is avoided when the driver has presented
a callback.
Link: https://lore.kernel.org/r/1617026056-50483-3-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces to allow for debugging issues with AIP tx.
Link: https://lore.kernel.org/r/1617026056-50483-2-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.
Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports both normal and record doorbell mode for RQ and CQ, SQ
record doorbell for userspace is also supported by the software for
flushing CQE process. As now the capability of HIP08 are exposed to the
user and are configurable, the support of normal doorbell should be added
back.
Note that, if switching to normal doorbell, the kernel will report "flush
cqe is unsupported" if modify qp to error status as the flush is based on
record doorbell.
Link: https://lore.kernel.org/r/1616840738-7866-2-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Encapsulate configuring GMV base address and other type of HEM table into
two separate functions to make process of setting HEM clearer.
Link: https://lore.kernel.org/r/1616815294-13434-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.
Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of congestion control algorithm includes DCQCN, LDCP, HC3 and
DIP. The driver will select one of them according to the firmware when
querying PF capabilities, and then set the related configuration fields
into QPC.
Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new type of command to query mac id of functions from the firmware,
it is used to select the template of congestion algorithm. More info will
be supported in the future.
Link: https://lore.kernel.org/r/1616679236-7795-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Link: https://lore.kernel.org/r/20210331020105.4858-1-tangyizhou@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The strlcpy function doesn't limit the source length, use the preferred
strscpy function instead.
Link: https://lore.kernel.org/r/20210329120131.18793-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, ODP caps are set during the init stage of mlx5_ib_dev,
regardless of whether the device profile supports ODP or not. There is no
point in setting ODP caps if the device profile doesn't support
ODP. Hence, move setting the ODP caps to the odp_init stage.
Link: https://lore.kernel.org/r/20210318135259.681264-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the L2 driver detects a device crash or device undergone reset, it
invokes a stop callback to recover from error.
The current RoCE driver doesn't recover the device. So move the device to
error state and dispatch fatal events to all qps Release the MSIx vectors
to avoid a crash when L2 driver disables the MSIx. Also, check for the
device state to avoid posting further commands to the HW.
Link: https://lore.kernel.org/r/1615968942-30970-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----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=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the ops named get_dev_fw_str to support ib_get_device_fw_str().
Link: https://lore.kernel.org/r/1615882161-53827-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to create the ODP EQ if the user doesn't use ODP MRs.
Hence, create it only when the first ODP MR is created. This EQ will be
destroyed only when the device is unloaded.
This will decrease the number of EQs created per device. for example: If
we creates 1K devices (SF/VF/etc'), than we will decrease the num of EQs
by 1K.
Link: https://lore.kernel.org/r/20210314125418.179716-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's incorrect to cast the type of pointer to xrcdn from (u32 *) to
(unsigned long *), then pass it into hns_roce_bitmap_alloc(), this will
lead to a memory corruption.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/1616381069-51759-1-git-send-email-liweihang@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch fixes bunch of kernel-doc compilation warnings like below:
drivers/infiniband/hw/i40iw/i40iw_cm.c:4372: warning: expecting prototype for i40iw_ifdown_notify(). Prototype was for i40iw_if_notify() instead
Link: https://lore.kernel.org/r/20210314133908.291945-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following smatch error:
drivers/infiniband/hw/mlx5/mr.c:1950 mlx5_ib_dereg_mr() error: uninitialized symbol 'rc'.
Fixes: e6fb246cca ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/20210314082250.10143-1-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.
Fixes: 292b3352bd ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that each representor stores a pointer to the managing E-Switch
use that information when creating the send-to-vport rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that a pointer to the managing E-Switch is stored in the representor
use it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The umem DMA list calculation was locked at 4k pages due to confusion
around how this API works and is used when larger pages are present.
The conclusion is:
- umem's cannot extend past what is mapped into the process, so creating
a lage page size and referring to a sub-range is not allowed
- umem's must always have a page offset of zero, except for sub PAGE_SIZE
umems
- The feature of umem_offset to create multiple objects inside a umem
is buggy and isn't used anyplace. Thus we can assume all users of the
current API have umem_offset == 0 as well
Provide a new page size calculator that limits the DMA list to the VA
range and enforces umem_offset == 0.
Allow user space to specify the page sizes which it can accept, this
bitmap must be derived from the intended use of the umem, based on
per-usage HW limitations.
Link: https://lore.kernel.org/r/20210304130501.1102577-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change uverbs_get_const/uverbs_get_const_default to work properly with
both signed/unsigned parameters.
Current APIs mix s64 and u64 which leads to incorrect check when u64
value was supplied and its upper bit was set. In that case
uverbs_get_const() / uverbs_get_const_default() lower bound check may
fail unexpectedly, target is unsigned (lower bound is 0) but value
became negative as of the s64 usage.
Split to have two different APIs, no change to callers as the required
API will be called internally according to the target type.
Link: https://lore.kernel.org/r/20210304130501.1102577-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct the map between mlx5 rates and corresponding ib rates, as they
don't always have a fixed offset between them.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210304124517.1100608-4-leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it
should be used only when driver is loaded. Instead we just need to read
the roce_en field.
In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled.
Fixes: 7a58779edd ("IB/mlx5: Improve query port for representor port")
Link: https://lore.kernel.org/r/20210304124517.1100608-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that this is only used in a few places in mr.c give it a sensible
name. It has nothing to do with the cache and can be invoked on any
MR. DMA is stopped and the user cannot touch the MR any further once it
completes.
Link: https://lore.kernel.org/r/20210304120745.1090751-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the SRCU stuff has been removed the entire MR destroy logic can
be made a lot simpler. Currently there are many different ways to destroy a
MR and it makes it really hard to do this task correctly. Route all
destruction through mlx5_ib_dereg_mr() and make it work for all
situations.
Since it turns out all the different MR types do basically the same thing
this removes a lot of knowledge of MR internals from ODP and leaves ODP
just exporting an operation to clean up children.
This fixes a few weird corner cases bugs and firmly uses the correct
ordering of the MR destruction:
- Stop parallel access to the mkey via the ODP xarray
- Stop DMA
- Release the umem
- Clean up ODP children
- Free/Recycle the MR
Link: https://lore.kernel.org/r/20210304120745.1090751-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct mlx5_ib_mr can be used for three different things, but only one
at a time:
- In the user MR cache
- As a kernel MR
- As a user MR
Overlay the three things into a single union with the following rules:
- If the mr is found on the cache_ent->head list then it is a cache MR
and umem == NULL. The entire union is zero after the MR is removed from
the cache.
- If umem != NULL or type == IB_MR_TYPE_USER then it is a user MR.
- If umem == NULL then it is a kernel MR
This reduces the size of struct mlx5_ib_mr to 552 bytes from 702.
The only place the three flows overlap in the code is during dereg, so add
a few extra checks along there.
Link: https://lore.kernel.org/r/20210304120745.1090751-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP
related fields are zero'd. This is true if the MR was just allocated, but
if the MR is recycled through the cache then the values are never zero'd.
This causes a bug in the odp_stats, they don't reset when the MR is
reallocated, also is_odp_implicit is never 0'd.
So we can use memset on a block of the mlx5_ib_mr reorganize the structure
to put all the data that can be zero'd by the cache at the end.
It is organized as an anonymous struct because the next patch will make
this a union.
Delete the unused smr_info. Don't set the kernel only desc_size on the
user path. No longer any need to zero mr->parent before freeing it, the
memset() will get it now.
Fixes: a3de94e3d6 ("IB/mlx5: Introduce ODP diagnostic counters")
Link: https://lore.kernel.org/r/20210304120745.1090751-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set mkey_index to the correct place when preparing the destroy_mkey inbox,
this will fix the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801)
op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
Link: https://lore.kernel.org/r/20210311142024.1282004-1-leon@kernel.org
Fixes: 1368ead04c ("RDMA/mlx5: Use strict get/set operations for obj_id")
Reviewed-by: Ido Kalir <idok@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
1. Don't set the ts_format bit to default when it reserved - device is
running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
context should be default / free running.
3. Set ts_format to WQ.
Fixes: 2fe8d4b878 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
HIP09 uses new address space to map SQ doorbell registers, the doorbell of
each QP is isolated based on the size of 64KB, which can improve the
performance in concurrency scenarios.
Link: https://lore.kernel.org/r/1614082833-23130-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The W=1 allmodconfig build produces the following warning:
drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line:
* Parse a series of data segments for page fault handling.
Fix it by changing /** to be /* as it is written in kernel-doc
documentation.
Fixes: 5e769e444d ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'")
Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set err to -ENOMEM if kzalloc fails instead of 0.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Wenpeng Liang