Commit Graph

6 Commits

Author SHA1 Message Date
Uwe Kleine-König 02dd2e417e pwm: sl28cpld: Simplify using devm_pwmchip_add()
This allows to drop the platform_driver's remove function. This is the
only user of driver data so this can go away, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-09-02 21:38:47 +02:00
Uwe Kleine-König f9a8ee8c8b pwm: Always allocate PWM chip base ID dynamically
Since commit 5e5da1e9fb ("pwm: ab8500: Explicitly allocate pwm chip
base dynamically") all drivers use dynamic ID allocation explicitly. New
drivers are supposed to do the same, so remove support for driver
specified base IDs and drop all assignments in the low-level drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:53:00 +01:00
Linus Torvalds d56154c7e8 pwm: Changes for v5.11-rc1
This is a fairly big release cycle from the PWM framework's point of
 view. There's a large patcheset here which converts drivers to use the
 new devm_platform_ioremap_resource() helper and a bunch of minor fixes
 to existing drivers. Some of the existing drivers also add support for
 more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.
 
 Finally there's a couple of new drivers for Intel Keem Bay and LGM SoCs
 as well as the DesignWare PWM controller.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl/c0lQZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zodh8EACkFTep9fQMtx03HsT/VXEi
 qfpJX8JhzB5/k8MbVyJjE7uy/dVs9Aer4rE53V93X3vN5Z1Lq78aC7UKpmfix/OQ
 EEtaSDL1j5KPk6XyxTSWwt5ynUP7rQdjAl1Sh+DfplrOPRUkDo5EA6vw1W1afQ0Q
 IxK4PSzWmHFfgs3V9gSvR7V6ChtyDzHfpuiy2WrMJkGtzP/f6Oebv87qYNsfOJFV
 VAPBPxe++BpM2opnFGAhpdqOtXKaaFl/x6zahNeDJNPv6R6LDbs2Hk3r+2OSj0Al
 WRH/9aB/50SEHZLVeDP0JzW8lX5OEaGH/ZtI+iXAL1mWM3YYlK4nfJYA//NszCtI
 uXK5aZ/xmm3PiDRJhL/zku+rIU8kh+Yj9P+MsCfTjrWSvjfXopOGQ3RsrANNBtOj
 93IhDA0hjiVArfSwQaWjsRRMTtzGQY6m6FHnHIBDkhI889q1HI/BVPsl3AL8AaTv
 0hBRp3SovuGdWqRTxw9ttMCi1a7aes7NTRmbXIH+tv/xB9hvn9DKUcJdrxN7KSu+
 NWSeT2vVZHRadQFfCmDi1jlTShDYsMVNbuDA7Holk1XwCFjIE7O5Ottx0s9Dvw0U
 e+yzwYhhpvE8/VkkglLkebIYOp8WQTkxhcVH4s0b7wgD0fyHhFHH0tsIj8sgjk7v
 dVDFsWQsM99YcvV9BSjoRg==
 =FlkB
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This is a fairly big release cycle from the PWM framework's point of
  view.

  There's a large patcheset here which converts drivers to use the new
  devm_platform_ioremap_resource() helper and a bunch of minor fixes to
  existing drivers. Some of the existing drivers also add support for
  more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.

  Finally there's a couple of new drivers for Intel Keem Bay and LGM
  SoCs as well as the DesignWare PWM controller"

* tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits)
  pwm: sun4i: Remove erroneous else branch
  pwm: sl28cpld: Set driver data before registering the PWM chip
  pwm: Remove unused function pwmchip_add_inversed()
  pwm: imx27: Fix overflow for bigger periods
  pwm: bcm2835: Support apply function for atomic configuration
  pwm: keembay: Fix build failure with -Os
  pwm: core: Use octal permission
  pwm: lpss: Make compilable with COMPILE_TEST
  pwm: Fix dependencies on HAS_IOMEM
  pwm: Use -EINVAL for unsupported polarity
  pwm: sti: Remove unnecessary blank line
  pwm: sti: Avoid conditional gotos
  pwm: Add PWM fan controller driver for LGM SoC
  Add DT bindings YAML schema for PWM fan controller of LGM SoC
  pwm: Add DesignWare PWM Controller Driver
  dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
  pwm: mediatek: Add MT8183 SoC support
  pwm: mediatek: Always use bus clock
  dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
  pwm: Add PWM driver for Intel Keem Bay
  ...
2020-12-19 11:51:32 -08:00
Thierry Reding edf7f80e78 pwm: sl28cpld: Set driver data before registering the PWM chip
It is good practice to set the driver data before registering a device
with a subsystem because the subsystem or the driver core may call back
into the driver implementation. This is not currently an issue, but to
prevent future changes from causing this to break unexpectedly, make
sure that the driver data is set before the PWM chip registration.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17 14:19:02 +01:00
Uwe Kleine-König 062c9cdf60 pwm: sl28cpld: fix getting driver data in pwm callbacks
Currently .get_state() and .apply() use dev_get_drvdata() on the struct
device related to the pwm chip.  This only works after .probe() called
platform_set_drvdata() which in this driver happens only after
pwmchip_add() and so comes possibly too late.

Instead of setting the driver data earlier use the traditional
container_of approach as this way the driver data is conceptually and
computational nearer.

Fixes: 9db33d221e ("pwm: Add support for sl28cpld PWM controller")
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-03 09:57:37 -08:00
Michael Walle 9db33d221e pwm: Add support for sl28cpld PWM controller
Add support for the PWM controller of the sl28cpld board management
controller. This is part of a multi-function device driver.

The controller has one PWM channel and can just generate four distinct
frequencies.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17 15:59:34 +01:00