The DES3 ECB has an IV size set but ECB does not need one.
Fixes: 4ada483978 ("crypto: marvell/cesa - add Triple-DES support")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the missing unlock before return from error path.
Fixes: 4363f3d3ce ("crypto: octeontx2 - add synchronization between mailbox accesses")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since there are two workqueues implemented in CPTPF driver - one
for handling mailbox requests from VFs and another for handling FLR.
In both cases PF driver will forward the request to AF driver by
writing to mailbox memory. A race condition may arise if two
simultaneous requests are written to mailbox memory. Introducing
locking mechanism to maintain synchronization between multiple
mailbox accesses.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variable c_size is being initialized with a value that is never read, it
is being re-assigned with a different value later on. The initialization
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No issues were found while using the driver with dm-crypt enabled. So
CONFIG_DM_CRYPT check in the driver can be removed.
This also fixes the NULL pointer dereference in driver release if
CONFIG_DM_CRYPT is enabled.
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
Call trace:
crypto_unregister_alg+0x68/0xfc
crypto_unregister_skciphers+0x44/0x60
otx2_cpt_crypto_exit+0x100/0x1a0
otx2_cptvf_remove+0xf8/0x200
pci_device_remove+0x3c/0xd4
__device_release_driver+0x188/0x234
device_release_driver+0x2c/0x4c
...
Fixes: 6f03f0e8b6 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
LDWB is getting incorrectly used in HW when
CPT_AF_LF()_PTR_CTL[IQB_LDWB]=1 and CPT instruction queue has less than
320 free entries. So, increase HW instruction queue size by 320 and give
320 entries less for SW/NIX RX as a SW workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to
LLC/DRAM encounters a fault/poison, a rare case may result
in unpredictable data being delivered to a CPT engine.
So, this patch adds code to set FLT_DIS as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When software sets CPT_AF_CTL[RNM_REQ_EN]=1 and RNM in not producing
entropy(i.e., RNM_ENTROPY_STATUS[NORMAL_CNT] < 0x40), the first cycle of
the response may be lost due to a conditional clocking issue. Due to
this, the subsequent random number stream will be corrupted. So, this
patch adds support to ensure RNM_ENTROPY_STATUS[NORMAL_CNT] = 0x40
before writing CPT_AF_CTL[RNM_REQ_EN] = 1, as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building with -Warray-bounds showed a stack variable array index
overflow. Increase the expected size of the array to avoid the warning:
In file included from ./include/linux/printk.h:555,
from ./include/asm-generic/bug.h:22,
from ./arch/x86/include/asm/bug.h:84,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/firmware.h:7,
from drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:5:
drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c: In function 'otx2_cpt_print_uc_dbg_info':
./include/linux/dynamic_debug.h:162:33: warning: array subscript 4 is above array bounds of 'u32[4]' {aka 'unsigned int[4]'} [-Warray-bounds]
162 | _dynamic_func_call(fmt, __dynamic_pr_debug, \
| ^
./include/linux/dynamic_debug.h:134:17: note: in definition of macro '__dynamic_func_call'
134 | func(&id, ##__VA_ARGS__); \
| ^~~~
./include/linux/dynamic_debug.h:162:9: note: in expansion of macro '_dynamic_func_call'
162 | _dynamic_func_call(fmt, __dynamic_pr_debug, \
| ^~~~~~~~~~~~~~~~~~
./include/linux/printk.h:570:9: note: in expansion of macro 'dynamic_pr_debug'
570 | dynamic_pr_debug(fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~
drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:1807:41: note: in expansion of macro 'pr_debug'
1807 | pr_debug("Mask: %8.8x %8.8x %8.8x %8.8x %8.8x",
| ^~~~~~~~
drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:1765:13: note: while referencing 'mask'
1765 | u32 mask[4];
| ^~~~
This is justified because the mask size (eng_grps->engs_num) can be at
most 144 (OTX2_CPT_MAX_ENGINES bits), which is larger than available
storage. 4 * 32 == 128, so this must be 5: 5 * 32bit = 160.
Additionally clear the mask before conversion so trailing bits are zero.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Srujana Challa <schalla@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Suheil Chandran <schandran@marvell.com>
Cc: Shijith Thotton <sthotton@marvell.com>
Cc: Lukasz Bartosik <lbartosik@marvell.com>
Cc: linux-crypto@vger.kernel.org
Fixes: d9d7749773 ("crypto: octeontx2 - add apis for custom engine groups")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OcteonTX2 CPT driver will fail to link without devlink support.
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_delete':
otx2_cpt_devlink.c:18: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_create':
otx2_cpt_devlink.c:9: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_uc_info':
otx2_cpt_devlink.c:27: undefined reference to `devlink_priv'
Fixes: fed8f4d5f9 ("crypto: octeontx2 - parameters for custom engine groups")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we're going to cap "eng_grp->g->engs_num" upper bounds then we should
cap the lower bounds as well.
Fixes: 43ac0b824f ("crypto: octeontx2 - load microcode and create engine groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If "egrp" is negative then it is causes an out of bounds access in
eng_grps->grp[].
Fixes: d9d7749773 ("crypto: octeontx2 - add apis for custom engine groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added devlink parameters to create and delete custom CPT engine groups.
Example:
devlink dev param set pci/0002:20:00.0 name egrp_create value \
"se:32;se.out" cmode runtime
devlink dev param set pci/0002:20:00.0 name egrp_delete value \
"egrp:1" cmode runtime
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Octeon TX2 CPT has three type of engines to handle symmetric, asymmetric
and ipsec specific workload. For better utilization, these engines can
be grouped to custom groups at runtime.
This patch adds APIs to create and delete custom CPT engine groups.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense. Just delete it.
Fixes: 8ec8015a31 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following coccicheck REVIEW:
./drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c:1688:16-17 use swap() to make code cleaner
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, in case of aead fallback, no associated data info is set in the
fallback request. To fix this, call aead_request_set_ad() to pass the assoclen.
Fixes: 6f03f0e8b6 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds master enable (ME) interrupt handler in PF. Upon
receiving ME interrupt for a VF, PF clears it's transaction
pending bit.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT result format had changed for CN10K HW to accommodate more
fields. This patch adds support to use new result format and
new LMTST lines for CPT operations on CN10K platform.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On CN10K platform transmit/receive buffer alloc and free from/to
hardware had changed to support burst operation. Whereas pervious
silicon's only support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used to send CPT commands to HW.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB
based on number of LMTLINES configured.
This patch adds support for mapping of PF/VF LMTST region.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mailbox region configuration has some changes on CN10K platform
from OcteonTX2(CN9XX) platform.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OcteonTX2 series of silicons have multiple variants, the
98xx variant has two crypto (CPT0 & CPT1) blocks. This patch
adds support for firmware load on new CPT block(CPT1).
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When CONFIG_CPUMASK_OFFSTACK is disabled, clang reports a warning
about a bogus condition:
drivers/crypto/marvell/octeontx2/otx2_cptlf.c:334:21: error: address of array 'lfs->lf[slot].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (lfs->lf[slot].affinity_mask)
~~ ~~~~~~~~~~~~~~^~~~~~~~~~~~~
In this configuration, the free_cpumask_var() function does nothing,
so the condition could be skipped.
When the option is enabled, there is no warning, but the check
is also redundant because free_cpumask_var() falls back to kfree(),
which is documented as ignoring NULL pointers.
Remove the check to avoid the warning.
Fixes: 6450601703 ("crypto: octeontx2 - add LF framework")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Marvell OcteonTX2 CPT physical function PCI device is present only
on OcteonTx2 SoC, and not available as an independent PCIe endpoint.
Hence add a dependency on ARCH_THUNDER2, to prevent asking the user
about this driver when configuring a kernel without OcteonTx2 platform
support.
Fixes: 5e8ce83347 ("crypto: marvell - add Marvell OcteonTX2 CPT PF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto octeontx2 driver depends on the mbox code in the network
tree. It tries to select the MBOX Kconfig option but that option
itself depends on many other options which are not selected, e.g.,
CONFIG_NET_VENDOR_MARVELL. It would be inappropriate to select them
all as randomly prompting the user for network options which would
oterhwise be disabled just because a crypto driver has been enabled
makes no sense.
This patch fixes this by adding a dependency on NET_VENDOR_MARVELL.
This makes the crypto driver invisible if the network option is off.
If the crypto driver must be visible even without the network stack
then the shared mbox code should be moved out of drivers/net.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 5e8ce83347 ("crypto: marvell - add Marvell OcteonTX2 CPT...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "num_vec" has to be signed for the error handling to work.
Fixes: 19d8e8c7be ("crypto: octeontx2 - add virtual function driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cesa driver mixes use of iomem pointers and normal kernel
pointers. Sometimes it uses memcpy_toio/memcpy_fromio on both
while other times it would use straight memcpy on both, through
the sg_pcopy_* helpers.
This patch fixes this by adding a new field sram_pool to the engine
for the normal pointer case which then allows us to use the right
interface depending on the value of engine->pool.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Attach LFs to CPT VF to process the crypto requests and register
LF interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Marvell OcteonTX2 CPT virtual function
driver. This patch includes probe, PCI specific initialization
and interrupt handling.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds support to get engine capabilities and adds a new mailbox
to share capabilities with VF driver.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT RVU Local Functions(LFs) needs to be attached to the
PF/VF to submit the instructions to CPT.
This patch adds the interface to initialize and attach
the LFs. It also adds interface to register the LF's
interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT includes microcoded GigaCypher symmetric engines(SEs), IPsec
symmetric engines(IEs), and asymmetric engines (AEs).
Each engine receives CPT instructions from the engine groups it has
subscribed to. This patch loads microcode, configures three engine
groups(one for SEs, one for IEs and one for AEs), and configures
all engines.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds 'sriov_configure' to enable/disable virtual functions (VFs).
Also Initializes VF<=>PF mailbox IRQs, register handlers for
processing these mailbox messages.
Admin function (AF) handles resource allocation and configuration for
PFs and their VFs. PFs request the AF directly, via mailboxes.
Unlike PFs, VFs cannot send a mailbox request directly. A VF sends
mailbox messages to its parent PF, with which it shares a mailbox
region. The PF then forwards these messages to the AF. After handling
the request, the AF sends a response back to the VF, through the PF.
This patch adds support for this 'VF <=> PF <=> AF' mailbox
communication.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the resource virtualization unit (RVU) each of the PF and AF
(admin function) share a 64KB of reserved memory region for
communication. This patch initializes PF <=> AF mailbox IRQs,
registers handlers for processing these communication messages.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds skeleton for the Marvell OcteonTX2 CPT physical function
driver which includes probe, PCI specific initialization and
hardware register defines.
RVU defines are present in AF driver
(drivers/net/ethernet/marvell/octeontx2/af), header files from
AF driver are included here to avoid duplication.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch that added src_dma/dst_dma to struct mv_cesa_tdma_desc
is broken on 64-bit systems as the size of the descriptor has been
changed. This patch fixes it by using u32 instead of dma_addr_t.
Fixes: e62291c1d9 ("crypto: marvell/cesa - Fix sparse warnings")
Cc: <stable@vger.kernel.org>
Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
Minghao Chi