Commit Graph

936 Commits

Author SHA1 Message Date
Gerrit Renker 69a6a0b38a dccp: allow probing of CCID-array length
This fixes a problem in the DCCP getsockopt() API: currently there is no way
for a user to a priori know the number of built-in CCIDs, other than trying
DCCP_SOCKOPT_AVAILABLE_CCIDS in a loop, incrementing the option length until
EINVAL is no longer returned.

This patch truncates the array to the user-provided length. No copy is made
when the length is <= 0.

Due to the length restriction in do_dccp_getsockopt() to sizeof(int), the
minimum array length remains 4, which is a reasonable default (only 3
CCIDs, CCID-2..4, are currently defined).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 11:47:00 -08:00
David S. Miller 9c119ba54c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-02-03 19:38:22 -08:00
Gerrit Renker 1386be55e3 dccp: fix auto-loading of dccp(_probe)
This fixes commit (38ff3e6bb9) ("dccp_probe:
Fix module load dependencies between dccp and dccp_probe", from 15 Jan).

It fixes the construction of the first argument of try_then_request_module(),
where only valid return codes from the first argument should be returned.

What we do now is assign the result of register_jprobe() to ret, without
the side effect of the comparison.

Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03 19:00:31 -08:00
Gerrit Renker 8ed030dd0a dccp: fix bug in cache allocation
This fixes a bug introduced in commit de4ef86cfc
("dccp: fix dccp rmmod when kernel configured to use slub", 17 Jan): the
vsnprintf used sizeof(slab_name_fmt), which became truncated to 4 bytes, since
slab_name_fmt is now a 4-byte pointer and no longer a 32-character array.

This lead to error messages such as
 FATAL: Error inserting dccp: No buffer space available

 >> kernel: [ 1456.341501] kmem_cache_create: duplicate cache cci
generated due to the truncation after the 3rd character.

Fixed for the moment by introducing a symbolic constant. Tested to fix the bug.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03 19:00:30 -08:00
David S. Miller 51c24aaaca Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-01-23 00:31:06 -08:00
David S. Miller 6be325719b Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-01-22 22:45:46 -08:00
Neil Horman de4ef86cfc dccp: fix dccp rmmod when kernel configured to use slub
Hey all-
	I was tinkering with dccp recently and noticed that I BUG halted the
kernel when I rmmod-ed the dccp module.  The bug halt occured because the page
that I passed to kfree failed the PageCompound and PageSlab test in the slub
implementation of kfree.  I tracked the problem down to the following set of
events:

1) dccp, unlike all other uses of kmem_cache_create, allocates a string
dynamically when registering a slab cache.  This allocated string is freed when
the cache is destroyed.

2) Normally, (1) is not an issue, but when Slub is in use, it is possible that
caches are 'merged'.  This process causes multiple caches of simmilar
configuration to use the same cache data structure.  When this happens, the new
name of the cache is effectively dropped.

3) (2) results in kmem_cache_name returning an ambigous value (i.e.
ccid_kmem_cache_destroy, which uses this fuction to retrieve the name pointer
for freeing), is no longer guaranteed that the string it assigned is what is
returned.

4) If such merge event occurs, ccid_kmem_cache_destroy frees the wrong pointer,
which trips over the BUG in the slub implementation of kfree (since its likely
not a slab allocation, but rather a pointer into the static string table
section.

So, what to do about this.  At first blush this is pretty clearly a leak in the
information that slub owns, and as such a slub bug.  Unfortunately, theres no
really good way to fix it, without exposing slub specific implementation details
to the generic slab interface.  Also, even if we could fix this in slub cleanly,
I think the RCU free option would force us to do lots of string duplication, not
only in slub, but in every slab allocator.  As such, I'd like to propose this
solution.  Basically, I just move the storage for the kmem cache name to the
ccid_operations structure.  In so doing, we don't have to do the kstrdup or
kfree when we allocate/free the various caches for dccp, and so we avoid the
problem, by storing names with static memory, rather than heap, the way all
other calls to kmem_cache_create do.

I've tested this out myself here, and it solves the problem quite well.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:59:01 -08:00
Alexey Dobriyan 2c8c1e7297 net: spread __net_init, __net_exit
__net_init/__net_exit are apparently not going away, so use them
to full extent.

In some cases __net_init was removed, because it was called from
__net_exit code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 19:16:02 -08:00
Neil Horman 38ff3e6bb9 dccp_probe: Fix module load dependencies between dccp and dccp_probe
This was just recently reported to me.  When built as modules, the
dccp_probe module has a silent dependency on the dccp module.  This
stems from the fact that the module_init routine of dccp_probe
registers a jprobe on the dccp_sendmsg symbol.  Since the symbol is
only referenced as a text string (the .symbol_name field in the jprobe
struct) rather than the address of the symbol itself, depmod never
picks this dependency up, and so if you load the dccp_probe module
without the dccp module loaded, the register_jprobe call fails with an
-EINVAL, and the whole module load fails.

The fix is pretty easy, we can just wrap the register_jprobe call in a
try_then_request_module call, which forces the dependency to get
satisfied prior to the probe registration.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 01:40:55 -08:00
Stefani Seibold 7acd72eb85 kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out...
rename kfifo_put...  into kfifo_in...  to prevent miss use of old non in
kernel-tree drivers

ditto for kfifo_get...  -> kfifo_out...

Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc
annotations more readable.

Add mini "howto porting to the new API" in kfifo.h

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold e64c026dd0 kfifo: cleanup namespace
change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo
should be reserved for internal functions only.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold c1e13f2567 kfifo: move out spinlock
Move the pointer to the spinlock out of struct kfifo.  Most users in
tree do not actually use a spinlock, so the few exceptions now have to
call kfifo_{get,put}_locked, which takes an extra argument to a
spinlock.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold 4546548789 kfifo: move struct kfifo in place
This is a new generic kernel FIFO implementation.

The current kernel fifo API is not very widely used, because it has to
many constrains.  Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.

I think this are the reasons why kfifo is not in use:

 - The API is to simple, important functions are missing
 - A fifo can be only allocated dynamically
 - There is a requirement of a spinlock whether you need it or not
 - There is no support for data records inside a fifo

So I decided to extend the kfifo in a more generic way without blowing up
the API to much.  The new API has the following benefits:

 - Generic usage: For kernel internal use and/or device driver.
 - Provide an API for the most use case.
 - Slim API: The whole API provides 25 functions.
 - Linux style habit.
 - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
 - Direct copy_to_user from the fifo and copy_from_user into the fifo.
 - The kfifo itself is an in place member of the using data structure, this save an
   indirection access and does not waste the kernel allocator.
 - Lockless access: if only one reader and one writer is active on the fifo,
   which is the common use case, no additional locking is necessary.
 - Remove spinlock - give the user the freedom of choice what kind of locking to use if
   one is required.
 - Ability to handle records. Three type of records are supported:
   - Variable length records between 0-255 bytes, with a record size
     field of 1 bytes.
   - Variable length records between 0-65535 bytes, with a record size
     field of 2 bytes.
   - Fixed size records, which no record size field.
 - Preserve memory resource.
 - Performance!
 - Easy to use!

This patch:

Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure.  This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them.  This
patch changes the implementation and all existing users.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:55 -08:00
Eric Dumazet 9327f7053e tcp: Fix a connect() race with timewait sockets
First patch changes __inet_hash_nolisten() and __inet6_hash()
to get a timewait parameter to be able to unhash it from ehash
at same time the new socket is inserted in hash.

This makes sure timewait socket wont be found by a concurrent
writer in __inet_check_established()

Reported-by: kapil dakhane <kdakhane@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08 20:17:51 -08:00
Linus Torvalds d7fc02c7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
2009-12-08 07:55:01 -08:00
William Allen Simpson e6b4d11367 TCPCT part 1a: add request_values parameter for sending SYNACK
Add optional function parameters associated with sending SYNACK.
These parameters are not needed after sending SYNACK, and are not
used for retransmission.  Avoids extending struct tcp_request_sock,
and avoids allocating kernel memory.

Also affects DCCP as it uses common struct request_sock_ops,
but this parameter is currently reserved for future use.

Signed-off-by: William.Allen.Simpson@gmail.com
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:07:23 -08:00
Eric W. Biederman f8572d8f2a sysctl net: Remove unused binary sysctl code
Now that sys_sysctl is a compatiblity wrapper around /proc/sys
all sysctl strategy routines, and all ctl_name and strategy
entries in the sysctl tables are unused, and can be
revmoed.

In addition neigh_sysctl_register has been modified to no longer
take a strategy argument and it's callers have been modified not
to pass one.

Cc: "David Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:05:06 -08:00
Eric Paris 13f18aa05f net: drop capability from protocol definitions
struct can_proto had a capability field which wasn't ever used.  It is
dropped entirely.

struct inet_protosw had a capability field which can be more clearly
expressed in the code by just checking if sock->type = SOCK_RAW.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05 21:40:17 -08:00
Krishna Kumar ea94ff3b55 net: Fix for dst_negative_advice
dst_negative_advice() should check for changed dst and reset
sk_tx_queue_mapping accordingly. Pass sock to the callers of
dst_negative_advice.

(sk_reset_txq is defined just for use by dst_negative_advice. The
only way I could find to get around this is to move dst_negative_()
from dst.h to dst.c, include sock.h in dst.c, etc)

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-20 18:55:46 -07:00
Eric Dumazet c720c7e838 inet: rename some inet_sock fields
In order to have better cache layouts of struct sock (separate zones
for rx/tx paths), we need this preliminary patch.

Goal is to transfert fields used at lookup time in the first
read-mostly cache line (inside struct sock_common) and move sk_refcnt
to a separate cache line (only written by rx path)

This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
sport and id fields. This allows a future patch to define these
fields as macros, like sk_refcnt, without name clashes.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18 18:52:53 -07:00
Eric Dumazet f373b53b5f tcp: replace ehash_size by ehash_mask
Storing the mask (size - 1) instead of the size allows fast path to be
a bit faster.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:44:02 -07:00
Brian Haley b301e82cf8 IPv6: use ipv6_addr_set_v4mapped()
Might as well use the ipv6_addr_set_v4mapped() inline we created last
year.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 13:58:25 -07:00
Gerrit Renker 996ccf4900 dccp ccid-3: Remove CCID naming redundancy 2/2
This continues the previous patch, by applying the same change to CCID-3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 13:51:24 -07:00
Gerrit Renker 77d2dd9374 dccp ccid-2: Remove CCID naming redundancy 1/2
This removes a redundancy in the CCID half-connection (hc) naming scheme:
 * instead of 'hctx->tx_...', write 'hc->tx_...';
 * instead of 'hcrx->rx_...', write 'hc->rx_...';

which works because the 'type' of the half-connection is encoded in the
'rx_' / 'tx_' prefixes.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 13:51:23 -07:00
Gerrit Renker 388d5e9905 dccp ccid-3: Overhaul CCID naming convention 2/2
This implements the new naming scheme also for CCID-3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 13:51:22 -07:00
Gerrit Renker b1c00fe3cf dccp ccid-2: Overhaul CCID naming convention 1/2
This patch starts a less problematic naming convention for CCID structs.

The old naming convention used 'hc{tx,rx}->ccid?hc{tx,rx}->...' as
recurring prefixes, which made the code
 * hard to write (not easy to fit into 80 characters);
 * hard to read  (most of the space is occupied by prefixes).

The new naming scheme:
 * struct entries for the TX socket are prefixed by 'tx_';
 * and those for the RX socket are prefixed by 'rx_'.

The identifiers then remain distinguishable when grep-ing through the tree:
 (a) RX/TX sockets are distinguished by the naming scheme,
 (b) individual CCIDs are distinguished by filename (ccid{2,3,4}.{c,h}).

This first patch implements the scheme for CCID-2.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 13:51:21 -07:00
David S. Miller b7058842c9 net: Make setsockopt() optlen be unsigned.
This provides safety against negative optlen at the type
level instead of depending upon (sometimes non-trivial)
checks against this sprinkled all over the the place, in
each and every implementation.

Based upon work done by Arjan van de Ven and feedback
from Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 16:12:20 -07:00
Jan Beulich 4481374ce8 mm: replace various uses of num_physpages by totalram_pages
Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Alexey Dobriyan 5708e868dc net: constify remaining proto_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:09 -07:00
Alexey Dobriyan 41135cc836 net: constify struct inet6_protocol
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:05 -07:00
Alexey Dobriyan 32613090a9 net: constify struct net_protocol
Remove long removed "inet_protocol_base" declaration.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:01 -07:00
Gerrit Renker aa1b1ff099 net-next-2.6 [PATCH 1/1] dccp: ccids whitespace-cleanup / CodingStyle
No code change, cosmetical changes only:

 * whitespace cleanup via scripts/cleanfile,
 * remove self-references to filename at top of files,
 * fix coding style (extraneous brackets),
 * fix documentation style (kernel-doc-nano-HOWTO).

Thanks are due to Ivo Augusto Calado who raised these issues by
submitting good-quality patches.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:02:54 -07:00
Stephen Hemminger 3b401a81c0 inet: inet_connection_sock_af_ops const
The function block inet_connect_sock_af_ops contains no data
make it constant.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 01:03:49 -07:00
David S. Miller aa11d958d1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	arch/microblaze/include/asm/socket.h
2009-08-12 17:44:53 -07:00
David S. Miller f222e8b40f Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-08-09 21:29:47 -07:00
Jan Engelhardt 36cbd3dcc1 net: mark read-only arrays as const
String literals are constant, and usually, we can also tag the array
of pointers const too, moving it to the .rodata section.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 10:42:58 -07:00
Wei Yongjun 476181cb05 dccp: missing destroy of percpu counter variable while unload module
percpu counter dccp_orphan_count is init in dccp_init() by
percpu_counter_init() while dccp module is loaded, but the
destroy of it is missing while dccp module is unloaded. We
can get the kernel WARNING about this. Reproduct by the
following commands:

  $ modprobe dccp
  $ rmmod dccp
  $ modprobe dccp

WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c()
Hardware name: VMware Virtual Platform
list_add corruption. next->prev should be prev (c080c0c4), but was (null). (next
=ca7188cc).
Modules linked in: dccp(+) nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc
Pid: 1956, comm: modprobe Not tainted 2.6.31-rc5 #55
Call Trace:
 [<c042f8fa>] warn_slowpath_common+0x6a/0x81
 [<c053a6cb>] ? __list_add+0x27/0x5c
 [<c042f94f>] warn_slowpath_fmt+0x29/0x2c
 [<c053a6cb>] __list_add+0x27/0x5c
 [<c053c9b3>] __percpu_counter_init+0x4d/0x5d
 [<ca9c90c7>] dccp_init+0x19/0x2ed [dccp]
 [<c0401141>] do_one_initcall+0x4f/0x111
 [<ca9c90ae>] ? dccp_init+0x0/0x2ed [dccp]
 [<c06971b5>] ? notifier_call_chain+0x26/0x48
 [<c0444943>] ? __blocking_notifier_call_chain+0x45/0x51
 [<c04516f7>] sys_init_module+0xac/0x1bd
 [<c04028e4>] sysenter_do_call+0x12/0x22

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 10:22:03 -07:00
Mel Gorman 1c29b3ff4f net-dccp: suppress warning about large allocations from DCCP
The DCCP protocol tries to allocate some large hash tables during
initialisation using the largest size possible.  This can be larger than
what the page allocator can provide so it prints a warning.  However, the
caller is able to handle the situation so this patch suppresses the
warning.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:36 -07:00
Jiri Olsa a57de0b433 net: adding memory barrier to the poll and receive callbacks
Adding memory barrier after the poll_wait function, paired with
receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper
to wrap the memory barrier.

Without the memory barrier, following race can happen.
The race fires, when following code paths meet, and the tp->rcv_nxt
and __add_wait_queue updates stay in CPU caches.

CPU1                         CPU2

sys_select                   receive packet
  ...                        ...
  __add_wait_queue           update tp->rcv_nxt
  ...                        ...
  tp->rcv_nxt check          sock_def_readable
  ...                        {
  schedule                      ...
                                if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
                                        wake_up_interruptible(sk->sk_sleep)
                                ...
                             }

If there was no cache the code would work ok, since the wait_queue and
rcv_nxt are opposit to each other.

Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already
passed the tp->rcv_nxt check and sleeps, or will get the new value for
tp->rcv_nxt and will return with new data mask.
In both cases the process (CPU1) is being added to the wait queue, so the
waitqueue_active (CPU2) call cannot miss and will wake up CPU1.

The bad case is when the __add_wait_queue changes done by CPU1 stay in its
cache, and so does the tp->rcv_nxt update on CPU2 side.  The CPU1 will then
endup calling schedule and sleep forever if there are no more data on the
socket.

Calls to poll_wait in following modules were ommited:
	net/bluetooth/af_bluetooth.c
	net/irda/af_irda.c
	net/irda/irnet/irnet_ppp.c
	net/mac80211/rc80211_pid_debugfs.c
	net/phonet/socket.c
	net/rds/af_rds.c
	net/rfkill/core.c
	net/sunrpc/cache.c
	net/sunrpc/rpc_pipe.c
	net/tipc/socket.c

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09 17:06:57 -07:00
Brian Haley d5fdd6babc ipv6: Use correct data types for ICMPv6 type and code
Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 04:31:07 -07:00
Eric Dumazet adf30907d6 net: skb->dst accessors
Define three accessors to get/set dst attached to a skb

struct dst_entry *skb_dst(const struct sk_buff *skb)

void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)

void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;

Delete skb->dst field

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 02:51:04 -07:00
Eric Dumazet 511c3f92ad net: skb->rtable accessor
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb

Delete skb->rtable field

Setting rtable is not allowed, just set dst instead as rtable is an alias.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 02:51:02 -07:00
Gerrit Renker 86739fb96e dccp: Do not let initial option overhead shrink the MPS
This fixes a problem caused by the overlap of the connection-setup and
established-state phases of DCCP connections.

During connection setup, the client retransmits Confirm Feature-Negotiation
options until a response from the server signals that it can move from the
half-established PARTOPEN into the OPEN state, whereupon the connection is
fully established on both ends (RFC 4340, 8.1.5).

However, since the client may already send data while it is in the PARTOPEN
state, consequences arise for the Maximum Packet Size: the problem is that the
initial option overhead is much higher than for the subsequent established
phase, as it involves potentially many variable-length list-type options
(server-priority options, RFC 4340, 6.4).

Applying the standard MPS is insufficient here: especially with larger
payloads this can lead to annoying, counter-intuitive EMSGSIZE errors.

On the other hand, reducing the MPS available for the established phase by
the added initial overhead is highly wasteful and inefficient.

The solution chosen therefore is a two-phase strategy:

   If the payload length of the DataAck in PARTOPEN is too large, an Ack is sent
   to carry the options, and the feature-negotiation list is then flushed.

   This means that the server gets two Acks for one Response. If both Acks get
   lost, it is probably better to restart the connection anyway and devising yet
   another special-case does not seem worth the extra complexity.

The result is a higher utilisation of the available packet space for the data
transmission phase (established state) of a connection.

The patch (over-)estimates the initial overhead to be 32*4 bytes -- commonly
seen values were around 90 bytes for initial feature-negotiation options.

It uses sizeof(u32) to mean "aligned units of 4 bytes".
For consistency, another use of 4-byte alignment is adapted.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 03:07:23 -08:00
Gerrit Renker 361a5c1dd0 dccp: Minimise header option overhead in setting the MPS
This patch resolves a long-standing FIXME to dynamically update the Maximum
Packet Size depending on actual options usage.

It uses the flags set by the feature-negotiation infrastructure to compute
the required header option size.

Most options are fixed-size, a notable exception are Ack Vectors (required
currently only by CCID-2). These can have any length between 3 and 1020
bytes. As a result of testing, 16 bytes (2 bytes for type/length plus 14 Ack
Vector cells) have been found to be sufficient for loss-free situations.

There are currently no CCID-specific header options which may appear on data
packets, thus it is not necessary to define a corresponding CCID field as
suggested in the old comment.

Further changes:
----------------
 Adjusted the type of 'cur_mps' to match the unsigned return type of the
 function.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 03:07:23 -08:00
Gerrit Renker f3f3abb62c dccp: Debugging functions for feature negotiation
Since all feature-negotiation processing now takes place in feat.c,
functions for producing verbose debugging output are concentrated
there.

New functions to print out values, entry records, and options are
provided, and also a macro is defined to not always have the function
name in the output line.

Thanks a lot to Wei Yongjun and Giuseppe Galeota for help and
discussion with an earlier revision of this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:05 -08:00
Gerrit Renker 883ca833e5 dccp: Initialisation and type-checking of feature sysctls
This patch takes care of initialising and type-checking sysctls
related to feature negotiation. Type checking is important since some
of the sysctls now directly impact the feature-negotiation process.

The sysctls are initialised with the known default values for each
feature.  For the type-checking the value constraints from RFC 4340
are used:

 * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes),
   tested and confirmed that it works up to 4294967295 - for Gbps speed;
 * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer);
 * CCIDs are between 0 .. 255;
 * request_retries, retries1, retries2 also between 0..255 for good measure;
 * tx_qlen is checked to be non-negative;
 * sync_ratelimit remains as before.

Notes:
------
 1. Die s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c.
 2. As pointed out by Arnaldo, the pattern of type-checking repeats itself in
    other places, sometimes with exactly the same kind of definitions (e.g.
    "static int zero;"). It may be a good idea (kernel janitors?) to consolidate
    type checking. For the sake of keeping the changeset small and in order not
    to affect other subsystems, I have not strived to generalise here.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:05 -08:00
Gerrit Renker 792b48780e dccp: Implement both feature-local and feature-remote Sequence Window feature
This adds full support for local/remote Sequence Window feature, from which the
  * sequence-number-validity (W) and
  * acknowledgment-number-validity (W') windows
derive as specified in RFC 4340, 7.5.3.

Specifically, the following is contained in this patch:
  * integrated new socket fields into dccp_sk;
  * updated the update_gsr/gss routines with regard to these fields;
  * updated handler code: the Sequence Window feature is located at the TX side,
    so the local feature is meant if the handler-rx flag is false;
  * the initialisation of `rcv_wnd' in reqsk is removed, since
    - rcv_wnd is not used by the code anywhere;
    - sequence number checks are not done in the LISTEN state (cf. 7.5.3);
    - dccp_check_req checks the Ack number validity more rigorously;
  * the `struct dccp_minisock' became empty and is now removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:04 -08:00
Gerrit Renker f90f92eed7 dccp: Initialisation framework for feature negotiation
This initialises feature negotiation from two tables, which are in
turn are initialised from sysctls.

As a novel feature, specifics of the implementation (e.g. that short
seqnos and ECN are not yet available) are advertised for robustness.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:04 -08:00
Gerrit Renker 4dbc242ed3 dccp ccid-3: Fix RFC reference
Thanks to Wei and Arnaldo for pointing out the correct
new reference for CCID-3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:17:22 -08:00
Leonardo Potenza 1b6725dea7 net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages:

WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit()
The function ccid_cleanup_builtins() references a function in an exit section.
Often the function tfrc_lib_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of tfrc_lib_exit.

WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit()
The function __init ccid_initialize_builtins() references
a function __exit tfrc_lib_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
tfrc_lib_exit() so it may be used outside an exit section.

Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:11:28 -08:00
Gerrit Renker 129fa44785 dccp: Integrate the TFRC library with DCCP
This patch integrates the TFRC library, which is a dependency of CCID-3 (and
CCID-4), with the new use of CCIDs in the DCCP module.		

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 21:45:33 -08:00
Gerrit Renker e5fd56ca4e dccp: Clean up ccid.c after integration of CCID plugins
This patch cleans up after integrating the CCID modules and, in addition,

 * moves the if/else cases from ccid_delete() into ccid_hc_{tx,rx}_delete();
 * removes the 'gfp' argument to ccid_new() - since it is always gfp_any().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 21:43:23 -08:00
Gerrit Renker ddebc973c5 dccp: Lockless integration of CCID congestion-control plugins
Based on Arnaldo's earlier patch, this patch integrates the standardised
CCID congestion control plugins (CCID-2 and CCID-3) of DCCP with dccp.ko:

 * enables a faster connection path by eliminating the need to always go 
   through the CCID registration lock;

 * updates the implementation to use only a single array whose size equals
   the number of configured CCIDs instead of the maximum (256);

 * since the CCIDs are now fixed array elements, synchronization is no
   longer needed, simplifying use and implementation.

CCID-2 is suggested as minimum for a basic DCCP implementation (RFC 4340, 10);
CCID-3 is a standards-track CCID supported by RFC 4342 and RFC 5348.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 21:42:53 -08:00
Herbert Xu eb4dea5853 net: Fix percpu counters deadlock
When we converted the protocol atomic counters such as the orphan
count and the total socket count deadlocks were introduced due to
the mismatch in BH status of the spots that used the percpu counter
operations.

Based on the diagnosis and patch by Peter Zijlstra, this patch
fixes these issues by disabling BH where we may be in process
context.

Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 23:04:08 -08:00
Arnaldo Carvalho de Melo a693722aec dccp_diag: LISTEN sockets don't have CCIDs
And thus when we try to use 'ss -danemi' on these sockets that have no
ccid blocks (data collected using systemtap after I fixed the problem):

dccp_diag_get_info sk=0xffff8801220a3100, dp->dccps_hc_rx_ccid=0x0000000000000000, dp->dccps_hc_tx_ccid=0x0000000000000000

We get an OOPS:

mica.ghostprotocols.net login: BUG: unable to handle kernel NULL pointer
dereferenc0
IP: [<ffffffffa0136082>] dccp_diag_get_info+0x82/0xc0 [dccp_diag]
PGD 12106f067 PUD 122488067 PMD 0
Oops: 0000 [#1] PREEMPT

Fix is trivial, and 'ss -d' is working again:

[root@mica ~]# ss -danemi
State   Recv-Q Send-Q   Local Address:Port   Peer Address:Port 
LISTEN  0      0                    *:5001              *:*
ino:7288 sk:220a3100ffff8801
	 mem:(r0,w0,f0,t0) cwnd:0 ssthresh:0
[root@mica ~]# 

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:08:01 -08:00
Gerrit Renker 6fdd34d43b dccp ccid-2: Phase out the use of boolean Ack Vector sysctl
This removes the use of the sysctl and the minisock variable for the Send Ack
Vector feature, as it now is handled fully dynamically via feature negotiation
(i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per
 RFC 4341, 4.).

Using a sysctl in parallel to this implementation would open the door to
crashes, since much of the code relies on tests of the boolean minisock /
sysctl variable. Thus, this patch replaces all tests of type

	if (dccp_msk(sk)->dccpms_send_ack_vector)
		/* ... */
with
	if (dp->dccps_hc_rx_ackvec != NULL)
		/* ... */

The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature
negotiation concluded that Ack Vectors are to be used on the half-connection.
Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child),
so that the test is a valid one.

The activation handler for Ack Vectors is called as soon as the feature
negotiation has concluded at the
 * server when the Ack marking the transition RESPOND => OPEN arrives;
 * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN.

Adding the sequence number of the Response packet to the Ack Vector has been
removed, since
 (a) connection establishment implies that the Response has been received;
 (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e.
     this entry will always be ignored;
 (c) it can not be used for anything useful - to detect loss for instance, only
     packets received after the loss can serve as pseudo-dupacks.

There was a FIXME to change the error code when dccp_ackvec_add() fails.
I removed this after finding out that:
 * the check whether ackno < ISN is already made earlier,
 * this Response is likely the 1st packet with an Ackno that the client gets,
 * so when dccp_ackvec_add() fails, the reason is likely not a packet error.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:19:06 -08:00
Gerrit Renker 4098dce5be dccp: Remove manual influence on NDP Count feature
Updating the NDP count feature is handled automatically now:
 * for CCID-2 it is disabled, since the code does not use NDP counts;
 * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths.

Allowing the user to change NDP values leads to unpredictable and failing
behaviour, since it is then possible to disable NDP counts even when they
are needed (e.g. in CCID-3).

This means that only those user settings are sensible that agree with the
values for Send NDP Count implied by the choice of CCID. But those settings
are already activated by the feature negotiation (CCID dependency tracking),
hence this form of support is redundant.

At startup the initialisation of the NDP count feature uses the default
value of 0, which is done implicitly by the zeroing-out of the socket when
it is allocated. If the choice of CCID or feature negotiation enables NDP
count, this will then be updated via the NDP activation handler.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:18:37 -08:00
Gerrit Renker 0049bab5e7 dccp: Remove obsolete parts of the old CCID interface
The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector
case, their value equals initially that of the sysctl, but at the end of
feature negotiation may be something different.

The old interface removed by this patch thus has been replaced by the newer
interface to dynamically query the currently loaded CCIDs.

Also removed are the constructors for the TX CCID and the RX CCID, since the
switch "rx <-> non-rx" is done by the handler in minisocks.c (and the handler
is the only place in the code where CCIDs are loaded).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:18:05 -08:00
Gerrit Renker 63b8e2861f dccp: Clean up old feature-negotiation infrastructure
The code removed by this patch is no longer referenced or used, the added
lines update documentation and copyrights.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:17:32 -08:00
Gerrit Renker 991d927c86 dccp: Integration of dynamic feature activation - part 3 (client side)
This integrates feature-activation in the client:

 1. When dccp_parse_options() fails, the reset code is already set; request_sent\
    _state_process() currently overrides this with `Packet Error', which is not
    intended - changed to use the reset code supplied by dccp_parse_options().

 2. When feature negotiation fails, the socket should be marked as not usable,
    so that the application is notified that an error occurred. This is achieved
    by a new label 'unable_to_proceed': generating an error code of `Aborted',
    setting the socket state to CLOSED, returning with ECOMM in sk_err.

 3. Avoids parsing the Ack twice in Respond state by not doing option processing
    again in dccp_rcv_respond_partopen_state_process (as option processing has
    already been done on the request_sock in dccp_check_req).

Since this addresses congestion-control initialisation, a corresponding
FIXME has been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:16:27 -08:00
Gerrit Renker 192b27ff35 dccp: Integration of dynamic feature activation - part 2 (server side)
This patch integrates the activation of features at the end of negotiation
into the server-side code.

Note regarding the removal of 'const':
--------------------------------------
 The 'const' attribute has been removed from 'dreq' since dccp_activate_values()
 needs to operate on dreq's feature list. Part of the activation is to remove
 those options from the list that have already been confirmed, hence it is not
 purely read-only.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:15:55 -08:00
Gerrit Renker 6eb55d172b dccp: Integration of dynamic feature activation - part 1 (socket setup)
This first patch out of three replaces the hardcoded default settings with
initialisation code for the dynamic feature negotiation.

The patch also ensures that the client feature-negotiation queue is flushed
only when entering the OPEN state.

Since confirmed Change options are removed as soon as they are confirmed
(in the DCCP-Response), this ensures that Confirm options are retransmitted.

Note on retransmitting Confirm options:
---------------------------------------
Implementation experience showed that it is necessary to retransmit Confirm
options. Thanks to Leandro Melo de Sales who reported a bug in an earlier
revision of the patch set, resulting from not retransmitting these options.

As long as the client is in PARTOPEN, it needs to retransmit the Confirm
options for the Change options received on the DCCP-Response from the server.

Otherwise, if the packet containing the Confirm options gets dropped in the
network, the connection aborts due to undefined feature negotiation state.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:15:26 -08:00
Ilpo Järvinen 61c1d052a3 dccp: use roundup instead of opencoding
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05 22:39:49 -08:00
Gerrit Renker 422d9cdcb8 dccp: Feature activation handlers
This patch provides the post-processing of feature negotiation state, after
the negotiation has completed.

To this purpose, handlers are used and added to the dccp_feat_table. Each
handler is passed a boolean flag whether the RX or TX side of the feature
is meant.

Several handlers are provided already, new handlers can easily be added.

The initialisation is now fully dynamic, i.e. CCIDs are activated only
after the feature negotiation. The integration of this dynamic activation
is done in the subsequent patches.

Thanks to Wei Yongjun for pointing out the necessity of skipping over empty
Confirm options while copying the negotiated feature values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:34:01 -08:00
Gerrit Renker b1ad00422e dccp: Processing Confirm options
Analogous to the previous patch, this adds code to interpret incoming Confirm
feature-negotiation options. Both functions operate on the feature-negotiation
list of either the request_sock (server) or the dccp_sock (client).

Thanks to Wei Yongjun for pointing out that it is overly restrictive to check
the entire list of confirmed SP values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:33:18 -08:00
Gerrit Renker e77b8363b2 dccp: Process incoming Change feature-negotiation options
This adds/replaces code for processing incoming ChangeL/R options.
The main difference is that:
 * mandatory FN options are now interpreted inside the function
  (there are too many individual cases to do this externally);
 * the function returns an appropriate Reset code or 0,
   which is then used to fill in the data for the Reset packet.

Old code, which is no longer used or referenced, has been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:32:35 -08:00
Gerrit Renker 75757a7d0c dccp: Preference list reconciliation
This provides two functions to
 * reconcile preference lists (with appropriate return codes) and
 * reorder the preference list if successful reconciliation changed the
   preferred value.

The patch also removes the old code for processing SP/NN Change options, since
new code to process these is mostly there already; related references have been
commented out.

The code for processing Change options follows in the next patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:31:04 -08:00
Gerrit Renker 8b7b6c75c6 dccp: Integrate feature-negotiation insertion code
The patch implements insertion of feature negotiation at the server (listening
and request socket) and the client (connecting socket).

In dccp_insert_options(), several statements have been grouped together now
to achieve (it is hoped) better efficiency by reducing the number of tests
each packet has to go through:
 - Ack Vectors are sent if the packet is neither a Data or a Request packet;
 - a previous issue is corrected - feature negotiation options are allowed
   on DataAck packets (5.8).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:29:30 -08:00
Gerrit Renker 0971d17ca3 dccp: Insert feature-negotiation options into skb
This patch replaces the earlier insertion routine from options.c, so that
code specific to feature negotiation can remain in feat.c. This is possible
by calling a function already existing in options.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:27:31 -08:00
Eric Dumazet dd24c00191 net: Use a percpu_counter for orphan_count
Instead of using one atomic_t per protocol, use a percpu_counter
for "orphan_count", to reduce cache line contention on
heavy duty network servers. 

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 21:17:14 -08:00
Alexey Dobriyan 52479b623d netns xfrm: lookup in netns
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns
to flow_cache_lookup() and resolver callback.

Take it from socket or netdevice. Stub DECnet to init_net.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 17:35:18 -08:00
Ingo Molnar 3ed7cc0f8b dccp: fix warning in net/dccp/options.c
this warning:

  net/dccp/options.c: In function ‘dccp_parse_options’:
  net/dccp/options.c:67: warning: ‘value’ may be used uninitialized in this function

is a bogus GCC warning. The compiler does not recognize the relation
between "value" and "mandatory" variables: the code flow can ever reach
the "out_invalid_option:" label if 'mandatory' is set to 1, and when
'mandatory' is non-zero, we'll always have 'value' initialized.

Help out the compiler by annotating the variable.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 16:57:30 -08:00
Gerrit Renker 8c862c23e2 dccp: Header option insertion routine for feature-negotiation
The patch extends existing code:
 * Confirm options divide into the confirmed value plus an optional preference
   list for SP values. Previously only the preference list was echoed for SP
   values, now the confirmed value is added as per RFC 4340, 6.1;
 * length and sanity checks are added to avoid illegal memory (or NULL) access.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 16:10:23 -08:00
Gerrit Renker d371056695 dccp: Support for Mandatory options
Support for Mandatory options is provided by this patch, which will
be used by subsequent feature-negotiation patches.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 16:09:11 -08:00
Gerrit Renker 02fa460ef5 dccp: Increase the scope of variable-length htonl/ntohl functions
This extends the scope of two available functions,
encode|decode_value_var, to work up to 6 (8) bytes, to match maximum
requirements in the RFC.

These functions are going to be used both by general option processing
and feature negotiation code, hence declarations have been put into
feat.h.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 16:07:53 -08:00
Gerrit Renker 71c262a3dd dccp: API to query the current TX/RX CCID
This provides function to query the current TX/RX CCID dynamically,
without reliance on the minisock value, using dynamic information
available in the currently loaded CCID module.

This query function is then used to
 (a) provide the getsockopt part for getting/setting CCIDs via sockopts;
 (b) replace the current test for "which CCID is in use" in probe.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 16:04:59 -08:00
Gerrit Renker b20a9c24d5 dccp: Set per-connection CCIDs via socket options
With this patch, TX/RX CCIDs can now be changed on a per-connection
basis, which overrides the defaults set by the global sysctl variables
for TX/RX CCIDs.

To make full use of this facility, the remaining patches of this patch
set are needed, which track dependencies and activate negotiated
feature values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 16:02:31 -08:00
Gerrit Renker 3d3e35aa78 dccp: Fix bracing in dccp_feat_list_lookup.
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 01:03:08 -08:00
Eric Dumazet 5caea4ea70 net: listening_hash get a spinlock per bucket
This patch prepares RCU migration of listening_hash table for
TCP/DCCP protocols.

listening_hash table being small (32 slots per protocol), we add
a spinlock for each slot, instead of a single rwlock for whole table.

This should reduce hold time of readers, and writers concurrency.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 00:40:07 -08:00
Eric Dumazet a7a0d6a87b net: inet_diag_handler structs can be const
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 15:43:27 -08:00
Gerrit Renker 1910299636 dccp: Tidy up setsockopt calls
This splits the setsockopt calls into two groups, depending on whether an
integer argument (val) is required and whether routines being called do
their own locking.

Some options (such as setting the CCID) use u8 rather than int, so that for
these the test with regard to integer-sizeof can not be used.

The second switch-case statement now only has those statements which need
locking and which make use of `val'.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:56:55 -08:00
Gerrit Renker dd9c0e363c dccp: Deprecate Ack Ratio sysctl
This patch deprecates the Ack Ratio sysctl, since
 * Ack Ratio is entirely ignored by CCID-3 and CCID-4,
 * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1);
 * even if it would work in CCID-2, there is no point for a user to change it:
   - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2),
   - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts
     (since waiting for Acks which will never arrive in this window),
   - cwnd is not a user-configurable value.

The only reasonable place for Ack Ratio is to print it for debugging. It is
planned to do this later on, as part of e.g. dccp_probe.

With this patch Ack Ratio is now under full control of feature negotiation:
 * Ack Ratio is resolved as a dependency of the selected CCID;
 * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to
   the default of 2, following RFC 4340, 11.3 - "New connections start with Ack
   Ratio 2 for both endpoints";
 * what happens then is part of another patch set, since it concerns the
   dynamic update of Ack Ratio while the connection is in full flight.

Thanks to Tomasz Grobelny for discussion leading up to this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:55:08 -08:00
Gerrit Renker 2945055984 dccp: Feature negotiation for minimum-checksum-coverage
This provides feature negotiation for server minimum checksum coverage
which so far has been missing.

Since sender/receiver coverage values range only from 0...15, their
type has also been reduced in size from u16 to u4.

Feature-negotiation options are now generated for both sender and receiver
coverage, i.e. when the peer has `forgotten' to enable partial coverage
then feature negotiation will automatically enable (negotiate) the partial
coverage value for this connection.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:53:48 -08:00
Gerrit Renker 49aebc66d6 dccp: Deprecate old setsockopt framework
The previous setsockopt interface, which passed socket options via struct
dccp_so_feat, is complicated/difficult to use. Continuing to support it leads to
ugly code since the old approach did not distinguish between NN and SP values.

This patch removes the old setsockopt interface and replaces it with two new
functions to register NN/SP values for feature negotiation. 
These are essentially wrappers around the internal __feat_register functions,
with checking added to avoid

 * wrong usage (type);
 * changing values while the connection is in progress.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:51:23 -08:00
Gerrit Renker 0c1168398e dccp: Mechanism to resolve CCID dependencies
This adds a hook to resolve features whose value depends on the choice of
CCID. It is done at the server since it can only be done after the CCID
values have been negotiated; i.e. the client will add its CCID preference
list on the Change options sent in the Request, which will be reconciled
with the local preference list of the server.

The concept is documented on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
				implementation_notes.html#ccid_dependencies

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:49:52 -08:00
Eric Dumazet 3ab5aee7fe net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls
RCU was added to UDP lookups, using a fast infrastructure :
- sockets kmem_cache use SLAB_DESTROY_BY_RCU and dont pay the
  price of call_rcu() at freeing time.
- hlist_nulls permits to use few memory barriers.

This patch uses same infrastructure for TCP/DCCP established
and timewait sockets.

Thanks to SLAB_DESTROY_BY_RCU, no slowdown for applications
using short lived TCP connections. A followup patch, converting
rwlocks to spinlocks will even speedup this case.

__inet_lookup_established() is pretty fast now we dont have to
dirty a contended cache line (read_lock/read_unlock)

Only established and timewait hashtable are converted to RCU
(bind table and listen table are still using traditional locking)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 19:40:17 -08:00
Gerrit Renker 9eca0a47de dccp: Resolve dependencies of features on choice of CCID
This provides a missing link in the code chain, as several features implicitly
depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector
feature, but also Ack Ratio and Send Loss Event Rate (also taken care of).

For Send Ack Vector, the situation is as follows:
 * since CCID2 mandates the use of Ack Vectors, there is no point in allowing 
   endpoints which use CCID2 to disable Ack Vector features such a connection;

 * a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer
   with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4);

 * for all other CCIDs, the use of (Send) Ack Vector is optional and thus
   negotiable. However, this implies that the code negotiating the use of Ack
   Vectors also supports it (i.e. is able to supply and to either parse or
   ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack
   Vector support), the use of Ack Vectors is here disabled, with a comment
   in the source code.

An analogous consideration arises for the Send Loss Event Rate feature,
since the CCID-3 implementation does not support the loss interval options
of RFC 4342. To make such use explicit, corresponding feature-negotiation
options are inserted which signal the use of the loss event rate option,
as it is used by the CCID3 code.

Lastly, the values of the Ack Ratio feature are matched to the choice of CCID.

The patch implements this as a function which is called after the user has
made all other registrations for changing default values of features.

The table is variable-length, the reserved (and hence for feature-negotiation
invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0'
is used to mark the end of the table.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:48:44 -08:00
Gerrit Renker d90ebcbfa7 dccp: Query supported CCIDs
This provides a data structure to record which CCIDs are locally supported
and three accessor functions:
 - a test function for internal use which is used to validate CCID requests
   made by the user;
 - a copy function so that the list can be used for feature-negotiation;   
 - documented getsockopt() support so that the user can query capabilities.

The data structure is a table which is filled in at compile-time with the
list of available CCIDs (which in turn depends on the Kconfig choices).

Using the copy function for cloning the list of supported CCIDs is useful for
feature negotiation, since the negotiation is now with the full list of available
CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation 
will not fail if the peer requests to use CCID3 instead of CCID2. 

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:47:26 -08:00
Gerrit Renker e8ef967a54 dccp: Registration routines for changing feature values
Two registration routines, for SP and NN features, are provided by this patch,
replacing a previous routine which was used for both feature types.

These are internal-only routines and therefore start with `__feat_register'.

It further exports the known limits of Sequence Window and Ack Ratio as symbolic
constants.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:43:40 -08:00
Gerrit Renker f74e91b6cc dccp: Limit feature negotiation to connection setup phase
This patch limits feature (capability) negotation to the connection setup phase:

 1. Although it is theoretically possible to perform feature negotiation at any
    time (and RFC 4340 supports this), in practice this is prohibitively complex,
    as it requires to put traffic on hold for each new negotiation.
 2. As a byproduct of restricting feature negotiation to connection setup, the
    feature-negotiation retransmit timer is no longer required. This part is now
    mapped onto the protocol-level retransmission.
    Details indicating why timers are no longer needed can be found on
    http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
	                                      implementation_notes.html

This patch disables anytime negotiation, subsequent patches work out full
feature negotiation support for connection setup.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:42:58 -08:00
Gerrit Renker d99a7bd210 dccp: Cleanup routines for feature negotiation
This inserts the required de-allocation routines for memory allocated
by feature negotiation in the socket destructors, replacing
dccp_feat_clean() in one instance.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:56:30 -08:00
Gerrit Renker ac75773c27 dccp: Per-socket initialisation of feature negotiation
This provides feature-negotiation initialisation for both DCCP sockets
and DCCP request_sockets, to support feature negotiation during
connection setup.

It also resolves a FIXME regarding the congestion control
initialisation.

Thanks to Wei Yongjun for help with the IPv6 side of this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:55:49 -08:00
Gerrit Renker 61e6473efb dccp: List management for new feature negotiation
This adds list initial fields and list management functions for the
new feature negotiation implementation.

Thanks to Arnaldo for suggestions and improvements.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:54:04 -08:00
Gerrit Renker 7d43d1a0f2 dccp: Implement lookup table for feature-negotiation information
A lookup table for feature-negotiation information, extracted from RFC
4340/42, is provided by this patch. All currently known features can
be found in this table, along with their feature location, their
default value, and type.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:43:47 -08:00
Gerrit Renker bd012f2e7b dccp: Basic data structure for feature negotiation
This patch prepares for the new and extended feature-negotiation
routines.

The following feature-negotiation data structures are provided:
	* a container for the various (SP or NN) values,
	* symbolic state names to track feature states,
	* an entry struct which holds all current information together,
	* elementary functions to fill in and process these structures.

Entry structs are arranged as FIFO for the following reason: RFC 4340
specifies that if multiple options of the same type are present, they
are processed in the order of their appearance in the packet; which
means that this order needs to be preserved in the local data
structure (the later insertion code also respects this order).

The struct list_head has been chosen for the following reasons: the most
frequent operations are

 * add new entry at tail (when receiving Change or setting socket
   options);
 * delete entry (when Confirm has been received);
 * deep copy of entire list (cloning from listening socket onto
   request socket).

The NN value has been set to 64 bit, which is a currently sufficient
upper limit (Sequence Window feature has 48 bit).

Thanks to Arnaldo, who contributed the streamlined layout of the entry
struct.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:38:20 -08:00
Harvey Harrison 21454aaad3 net: replace NIPQUAD() in net/*/
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:54:56 -07:00
Gerrit Renker 944f750227 dccp: Port redirection support for DCCP
Commit a3116ac5c2 from 1st October ("tcp: Port
redirection support for TCP") broke DCCP skb lookup by changing inet_csk_clone,
which is used by DCCP to generate the child socket after the handshake.

This patch updates DCCP to use 'loc_port' instead of 'sport', which fixes the
problem, and thus inheriting port redirection support via the new interface.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-19 23:36:47 -07:00
Johannes Berg 95a5afca4a net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
Some code here depends on CONFIG_KMOD to not try to load
protocol modules or similar, replace by CONFIG_MODULES
where more than just request_module depends on CONFIG_KMOD
and and also use try_then_request_module in ebtables.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16 15:24:51 -07:00
Denis V. Lunev e41b5368e0 ipv6: added net argument to ICMP6_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:14:13 -07:00
Arnaldo Carvalho de Melo 9a1f27c480 inet_hashtables: Add inet_lookup_skb helpers
To be able to use the cached socket reference in the skb during input
processing we add a new set of lookup functions that receive the skb on
their argument list.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 11:41:57 -07:00
Gerrit Renker 410e27a49b This reverts "Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/dccp_exp"
as it accentally contained the wrong set of patches. These will be
submitted separately.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-09 13:27:22 +02:00
Gerrit Renker a3cbdde8e9 dccp ccid-3: Preventing Oscillations
This implements [RFC 3448, 4.5], which performs congestion avoidance behaviour
by reducing the transmit rate as the queueing delay (measured in terms of
long-term RTT) increases.

Oscillation can be turned on/off via a module option (do_osc_prev) and via sysfs
(using mode 0644), the default is off.

Overflow analysis:
------------------
 * oscillation prevention is done after update_x(), so that t_ipi <= 64000;
 * hence the multiplication "t_ipi * sqrt(R_sample)" needs 64 bits;
 * done using u64 for sqrt_sample and explicit typecast of t_ipi;
 * the divisor, R_sqmean, is non-zero because oscillation prevention is first
   called when receiving the second feedback packet, and tfrc_scaled_rtt() > 0.

A detailed discussion of the algorithm (with plots) is on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ccid3/sender_notes/oscillation_prevention/

The algorithm has negative side effects:
  * when allowing to decrease t_ipi (leads to a large RTT) and
  * when using it during slow-start;
both uses are therefore disabled.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:43 +02:00
Gerrit Renker 53ac9570c8 dccp ccid-3: Simplify computing and range-checking of t_ipi
This patch simplifies the computation of t_ipi, avoiding expensive computations
to enforce the minimum sending rate.

Both RFC 3448 and rfc3448bis (revision #06), as well as RFC 4342 sec 5., require
at various stages that at least one packet must be sent per t_mbi = 64 seconds.
This requires frequent divisions of the type X_min = s/t_mbi, which are later
converted back into an inter-packet-interval t_ipi_max = s/X_min = t_mbi.

The patch removes the expensive indirection; in the unlikely case of having
a sending rate less than one packet per 64 seconds, it also re-adjusts X.

The following cases document conformance with RFC 3448  / rfc3448bis-06:
 1) Time until receiving the first feedback packet:
   * if the sender has no initial RTT sample then X = s/1 Bps > s/t_mbi;
   * if the sender has an initial RTT sample or when the first feedback
     packet is received, X = W_init/R > s/t_mbi.

 2) Slow-start (p == 0 and feedback packets come in):
   * RFC 3448  (current code) enforces a minimum of s/R > s/t_mbi;
   * rfc3448bis (future code) enforces an even higher minimum of W_init/R.

 3) Congestion avoidance with no absence of feedback (p > 0):
   * when X_calc or X_recv/2 are too low, the minimum of X_min = s/t_mbi
     is enforced in update_x() when calling update_send_interval();
   * update_send_interval() is, as before, only called when X changes
     (i.e. either when increasing or decreasing, not when in equilibrium).

 4) Reduction of X without prior feedback or during slow-start (p==0):
   * both RFC 3448 and rfc3448bis here halve X directly;
   * the associated constraint X >= s/t_mbi is nforced here by send_interval().

 5) Reduction of X when p > 0:
   * X is modified indirectly via X_recv (RFC 3448) or X_recv_set (rfc3448bis);
   * in both cases, control goes back to section 4.3 (in both documents);
   * since p > 0, both documents use X = max(min(...), s/t_mbi), which is
     enforced in this patch by calling send_interval() from update_x().

I think that this analysis is exhaustive. Should I have forgotten a case,
the worst-case consideration arises when X sinks below s/t_mbi, and is then
increased back up to this minimum value. Even under this assumption, the
behaviour is correct, since all lower limits of X in RFC 3448 / rfc3448bis
are either equal to or greater than s/t_mbi.

Note on the condition X >= s/t_mbi  <==> t_ipi = s/X <= t_mbi: since X is
scaled by 64, and all time units are in microseconds, the coded condition is:

    t_ipi = s * 64 * 10^6 usec / X <= 64 * 10^6 usec

This simplifies to s / X <= 1 second <==> X * 1 second >= s > 0.
(A zero `s' is not allowed by the CCID-3 code).	

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:43 +02:00
Gerrit Renker c8f41d50ad dccp ccid-3: Measuring the packet size s with regard to rfc3448bis-06
rfc3448bis allows three different ways of tracking the packet size `s': 

 1. using the MSS/MPS (at initialisation, 4.2, and in 4.1 (1));
 2. using the average of `s' (in 4.1);
 3. using the maximum of `s' (in 4.2).

Instead of hard-coding a single interpretation of rfc3448bis, this implements
a choice of all three alternatives and suggests the first as default, since it
is the option which is most consistent with other parts of the specification.

The patch further deprecates the update of t_ipi whenever `s' changes. The
gains of doing this are only small since a change of s takes effect at the
next instant X is updated:
 * when the next feedback comes in (within one RTT or less);
 * when the nofeedback timer expires (within at most 4 RTTs).
 
Further, there are complications caused by updating t_ipi whenever s changes:
 * if t_ipi had previously been updated to effect oscillation prevention (4.5),
   then it is impossible to make the same adjustment to t_ipi again, thus
   counter-acting the algorithm;
 * s may be updated any time and a modification of t_ipi depends on the current
   state (e.g. no oscillation prevention is done in the absence of feedback);
 * in rev-06 of rfc3448bis, there are more possible cases, depending on whether
   the sender is in slow-start (t_ipi <= R/W_init), or in congestion-avoidance,
   limited by X_recv or the throughput equation (t_ipi <= t_mbi).

Thus there are side effects of always updating t_ipi as s changes. These may not
be desirable. The only case I can think of where such an update makes sense is
to recompute X_calc when p > 0 and when s changes (not done by this patch).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 891e4d8a40 dccp ccid-3: Tidy up CCID-Kconfig dependencies
The per-CCID menu has several dependencies on EXPERIMENTAL. These are redundant,
since net/dccp/ccids/Kconfig is sourced by net/dccp/Kconfig and since the
latter menu in turn asserts a dependency on EXPERIMENTAL.

The patch removes the redundant dependencies as well as the repeated reference
within the sub-menu.

Further changes:
----------------
Two single dependencies on CCID-3 are replaced with a single enclosing `if'.
    
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 9d497a2c91 dccp ccid-3: Implement rfc3448bis change to initial-rate computation
The patch updates CCID-3 with regard to the latest rfc3448bis-06: 
 * in the first revisions of the draft, MSS was used for the RFC 3390 window; 
 * then (from revision #1 to revision #2), it used the packet size `s';
 * now, in this revision (and apparently final), the value is back to MSS.

This change has an implication for the case when no RTT sample is available,
at the time of sending the first packet:

 * with RTT sample, 2*MSS/RTT <= initial_rate <= 4*MSS/RTT;
 * without RTT sample, the initial rate is one packet (s bytes) per second
   (sec. 4.2), but using s instead of MSS here creates an imbalance, since
   this would further reduce the initial sending rate.

Hence the patch uses MSS (called MPS in RFC 4340) in all places.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 88e97a9334 dccp ccid-3: Update the RX history records in one place
This patch is a requirement for enabling ECN support later on. With that change
in mind, the following preparations are done:
 * renamed handle_loss() into congestion_event() since it returns true when a
   congestion event happens (it will eventually also take care of ECN packets);
 * lets tfrc_rx_congestion_event() always update the RX history records, since
   this routine needs to be called for each non-duplicate packet anyway;
 * made all involved boolean-type functions to have return type `bool';

Updating the RX history records is now only necessary for the packets received
up to sending the first feedback. The receiver code becomes again simpler.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 68c89ee535 dccp ccid-3: Update the computation of X_recv
This updates the computation of X_recv with regard to Errata 610/611 for
RFC 4342 and draft rfc3448bis-06, ensuring that at least an interval of 1
RTT is used to compute X_recv.  The change is wrapped into a new function
ccid3_hc_rx_x_recv().

Further changes:
----------------
 * feedback is not sent when no data packets arrived (bytes_recv == 0), as per
   rfc3448bis-06, 6.2;
 * take the timestamp for the feedback /after/ dccp_send_ack() returns, to avoid
   taking the transmission time into account (in case layer-2 is busy);
 * clearer handling of failure in ccid3_first_li().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 22338f09bd dccp tfrc: Increase number of RTT samples
This improves the receiver RTT sampling algorithm so that it tries harder to get
as many RTT samples as possible. 

The algorithm is based the concepts presented in RFC 4340, 8.1, using timestamps
and the CCVal window counter. There exist 4 cases for the CCVal difference:
 * == 0: less than RTT/4 passed since last packet -- unusable;
 *  > 4: (much) more than 1 RTT has passed since last packet -- also unusable;
 * == 4: perfect sample (exactly one RTT has passed since last packet);
 * 1..3: sub-optimal sample (between RTT/4 and 3*RTT/4 has passed).

In the last case the algorithm tried to optimise by storing away the candidate
and then re-trying next time. The problem is that
 * a large number of samples is needed to smooth out the inaccuracies of the
   algorithm;
 * the sender may not be sending enough packets to warrant a "next time";
 * hence it is better to use suboptimal samples whenever possible.
The algorithm now stores away the current sample only if the difference is 0.

Applicability and background
----------------------------
A realistic example is MP3 streaming where packets are sent at a rate of less
than one packet per RTT, which means that suitable samples are absent for a
very long time.

The effectiveness of using suboptimal samples (with a delta between 1 and 4) was
confirmed by instrumenting the algorithm with counters. The results of two 20
second test runs were:
 * With the old algorithm and a total of 38442 function calls, only 394 of these
   calls resulted in usable RTT samples (about 1%), and 378 out of these were
   "perfect" samples and 28013 (unused) samples had a delta of 1..3.
 * With the new algorithm and a total of 37057 function calls, 1702 usable RTT
   samples were retrieved (about 4.6%), 5 out of these were "perfect" samples.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:42 +02:00
Gerrit Renker 49ffc29a02 dccp: Clamping RTT values
This extracts the clamping part of dccp_sample_rtt() and makes it available
to other parts of the code (as e.g. used in the next patch).

Note: The function dccp_sample_rtt() now reduces to subtracting the elapsed
time. This could be eliminated but would require shorter prefixes and thus
is not done by this patch - maybe an idea for later.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:41 +02:00
Gerrit Renker 2b81143aa3 dccp ccid-3: Always perform receiver RTT sampling
This updates the CCID-3 receiver in part with regard to errata 610 and 611
(http://www.rfc-editor.org/errata_list.php), which change RFC 4342 to use the
Receive Rate as specified in rfc3448bis, requiring to constantly sample the
RTT (or use a sender RTT).

Doing this requires reusing the RX history structure after dealing with a loss.

The patch does not resolve how to compute X_recv if the interval is less
than 1 RTT. A FIXME has been added (and is resolved in subsequent patch).

Furthermore, since this is all TFRC-based functionality, the RTT estimation
is now also performed by the dccp_tfrc_lib module. This further simplifies
the CCID-3 code.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:41 +02:00
Gerrit Renker 2f3e3bbad9 dccp ccid-3: Remove duplicate RX states
The only state information that the CCID-3 receiver keeps is whether initial 
feedback has been sent or not. Further, this overlaps with use of feedback:

 * state == TFRC_RSTATE_NO_DATA as long as no feedback has been sent;
 * state == TFRC_RSTATE_DATA    as soon as the first feedback has been sent.

This patch reduces the duplication, by memorising the type of the last feedback.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:41 +02:00
Gerrit Renker 34a081be8e dccp tfrc: Let dccp_tfrc_lib do the sampling work
This migrates more TFRC-related code into the dccp_tfrc_lib:
 * sampling of the packet size `s' (which is only needed until the first
   loss interval is computed (ccid3_first_li));
 * updating the byte-counter `bytes_recvd' in between sending feedbacks.
The result is a better separation of CCID-3 specific and TFRC specific
code, which aids future integration with ECN and e.g. CCID-4.

Further changes:
----------------
 * replaced magic number of 536 with equivalent constant TCP_MIN_RCVMSS;
   (this constant is also used when no estimate for `s' is available).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:41 +02:00
Gerrit Renker 3ca7aea041 dccp tfrc: Return type of update_i_mean is void
This changes the return type of tfrc_lh_update_i_mean() to void, since that 
function returns always `false'. This is due to 

 	len = dccp_delta_seqno(cur->li_seqno, DCCP_SKB_CB(skb)->dccpd_seq) + 1;
 
 	if (len - (s64)cur->li_length <= 0)	/* duplicate or reordered */
		return 0;

which means that update_i_mean can only increase the length of the open loss
interval I_0, and hence the value of I_tot0 (RFC 3448, 5.4). Consequently the
test `i_mean < old_i_mean' at the end of the function always evaluates to false.

There is no known way by which a loss interval can suddenly become shorter,
therefore the return type of the function is changed to void. (That is, under
the given circumstances step (3) in RFC 3448, 6.1 will not occur.)

Further changes:
----------------
 * the function is now called from tfrc_rx_handle_loss, which is equivalent
   to the previous way of calling from rx_packet_recv (it was called whenever
   there was no new or pending loss, now  it is also updated when there is
   a pending loss - this increases the accuracy a bit);
 * added a FIXME to possibly consider NDP counting as per RFC 4342 (this is
   not implemented yet).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:41 +02:00
Gerrit Renker d20ed95f8b dccp tfrc: Perform early loss detection
This enables the TFRC code to begin loss detection (as soon as the module
is loaded), using the latest updates from rfc3448bis-06, 6.3.1:

 * when the first data packet(s) are lost or marked, set
 * X_target = s/(2*R) => f(p) = s/(R * X_target) = 2,
 * corresponding to a loss rate of ~ 20.64%.

The handle_loss() function is now called right at the begin of rx_packet_recv()
and thus no longer protected against duplicates: hence a call to rx_duplicate()
has been added.  Such a call makes sense now, as the previous patch initialises
the first entry with a sequence number of GSR.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Gerrit Renker 24b8d34321 dccp tfrc: Receiver history initialisation routine
This patch 
 1) separates history allocation and initialisation, to facilitate early
    loss detection (implemented by a subsequent patch);

 2) removes duplication by using the existing tfrc_rx_hist_purge() if the
    allocation fails. This is now possible, since the initialisation routine
 3) zeroes out the entire history before using it. 

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Gerrit Renker 8b67ad12b0 dccp tfrc: Suppress unavoidable "below resolution" warning
In the congestion-avoidance phase a decay of p towards 0 is natural once fewer
losses are encountered. Hence the warning message "p is below resolution" is
not necessary, and thus turned into a debug message by this patch.

The TFRC_SMALLEST_P is needed since in theory p never actually reaches 0. When
no further losses are encountered, the loss interval I_0 grows in length, 
causing p to decrease towards 0, causing X_calc = s/(RTT * f(p)) to increase.

With the given minimum-resolution this congestion avoidance phase stops at some
fixed value, an approximation formula has been added to the documentation.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Gerrit Renker d0c05fe444 dccp ccid-3: Simplified handling of TX states
Since CCIDs are only used during the established phase of a connection,
they have very little internal state; this specifically reduces to:

 * "no packet sent" if and only if s == 0, for the TX packet size s;

 * when the first packet has been sent (i.e. `s' > 0), the question is whether
   or not feedback has been received:
   - if a feedback packet is received, "feedback = yes" is set,
   - if the nofeedback timer expires,  "feedback = no"  is set.

Thus the CCID only needs to remember state about whether or not feedback
has been received. This is now implemented using a boolean flag, which is
toggled when a feedback packet arrives or the nofeedback timer expires.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Gerrit Renker f76fd327a8 dccp ccid-3: Runtime verification of timer resolution
The DCCP base time resolution is 10 microseconds (RFC 4340, 13.1 ... 13.3).

Using a timer with a lower resolution was found to trigger the following
bug warnings/problems on high-speed networks (e.g. local loopback):
 * RTT samples are rounded down to 0 if below resolution;
 * in some cases, negative RTT samples were observed;
 * the CCID-3 feedback timer complains that the feedback interval is 0,
   since the feedback interval is in the order of 1 RTT or less and RTT
   measurement rounded this down to 0;
On an Intel computer this will for instance happen when using a
boot-time parameter of "clocksource=jiffies".

The following system log messages were observed:
  11:24:00 kernel: BUG: delta (0) <= 0 at ccid3_hc_rx_send_feedback()
  11:26:12 kernel: BUG: delta (0) <= 0 at ccid3_hc_rx_send_feedback()
  11:26:30 kernel: dccp_sample_rtt: unusable RTT sample 0, using min
  11:26:30 last message repeated 5 times

This patch defines a global constant for the time resolution, adds this in
timer.c, and checks the available clock resolution at CCID-3 module load time.

When the resolution is worse than 10 microseconds, module loading exits with
a message "socket type not supported".

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Tomasz Grobelny 7d1af6a8d9 dccp qpolicy: Parameter checking of cmsg qpolicy parameters
Ensure that cmsg->cmsg_type value is valid for qpolicy 
that is currently in use.

Signed-off-by: Tomasz Grobelny <tomasz@grobelny.oswiecenia.net>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:40 +02:00
Tomasz Grobelny d6da3511d6 dccp: Policy-based packet dequeueing infrastructure
This patch adds a generic infrastructure for policy-based dequeueing of 
TX packets and provides two policies:
 * a simple FIFO policy (which is the default) and
 * a priority based policy (set via socket options).
Both policies honour the tx_qlen sysctl for the maximum size of the write
queue (can be overridden via socket options). 

The priority policy uses skb->priority internally to assign an u32 priority
identifier, using the same ranking as SO_PRIORITY. The skb->priority field
is set to 0 when the packet leaves DCCP. The priority is supplied as ancillary
data using cmsg(3), the patch also provides the requisite parsing routines.

Signed-off-by: Tomasz Grobelny <tomasz@grobelny.oswiecenia.net>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker ddab05568e dccp: Clean up slow-path input processing
This patch rearranges the order of statements of the slow-path input processing
(i.e. any other state than OPEN), to resolve the following issues.

 1. Dependencies: the order of statements now better matches RFC 4340, 8.5, i.e.
    step 7 is before step 9 (previously 9 was before 7), and parsing options in
    step 8 (which can consume resources) now comes after step 7.
 2. Bug-fix: in state CLOSED, there should not be any sequence number checking
    or option processing. This is why the test for CLOSED has been moved after
    the test for LISTEN.
 3. As before sequence number checks are omitted if in state LISTEN/REQUEST, due
    to the note underneath the table in RFC 4340, 7.5.3.
 4. Packets are now passed on to Ack Vector / CCID processing only after
    - step 7  (receive unexpected packets), 
    - step 9  (receive Reset),
    - step 13 (receive CloseReq),
    - step 14 (receive Close)
    and only if the state is PARTOPEN. This simplifies CCID processing:
    - in LISTEN/CLOSED the CCIDs are non-existent;
    - in RESPOND/REQUEST the CCIDs have not yet been negotiated;
    - in CLOSEREQ and active-CLOSING the node has already closed this socket;
    - in passive-CLOSING the client is waiting for its Reset.
    In the last case, RFC 4340, 8.3 leaves it open to ignore further incoming
    data, which is the approach taken here.

As a result of (3), CCID processing is now indeed confined to OPEN/PARTOPEN
states, i.e. congestion control is performed only on the flow of data packets. 

This avoids pathological cases of doing congestion control on those messages
which set up and terminate the connection. 

I have done a few checks to see if this creates a problem in other parts of
the code. This seems not to be the case; even if there were one, it would be
better to fix it than to perform congestion control on Close/Request/Response
messages. Similarly for Ack Vectors (as they depend on the negotiated CCID).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker 6224877b2c tcp/dccp: Consolidate common code for RFC 3390 conversion
This patch consolidates the code common to TCP and CCID-2:
 * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and
 * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker b25b0c60b0 dccp: Combine the functionality of enqeueing and cloning
Realising the following call pattern,
 * first dccp_entail() is called to enqueue a new skb and
 * then skb_clone() is called to transmit a clone of that skb,

this patch integrates both interrelated steps into dccp_entail().

Note: the return value of skb_clone is not checked. It may be an idea to add a
      warning if this occurs. In both instances, however, a timer is set for
      retransmission, so that cloning is re-tried via dccp_retransmit_skb().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker 20bbd0f75e dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()
This removes the wrappers around the sk timer functions as it makes the code
clearer and not much is gained from using wrappers: the BUG_ON in 
start_rto_timer will never trigger since that function was called only when
 * the RTO timer expired (rto_expire, and then timer_pending() is false);
 * in tx_packet_sent only if !timer_pending() (BUG_ON is redundant here);
 * previously in new_ack, after stopping the timer (timer_pending() false).

One further motive behind this patch is to replace the RTO timer with the
icsk retransmission timer, as it is already part of the DCCP socket.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker 1435562d7e dccp ccid-2: Replace broken RTT estimator with better algorithm
The current CCID-2 RTT estimator code is in parts broken and lags behind the
suggestions in RFC2988 of using scaled variants for SRTT/RTTVAR. 
That code is replaced by the present patch, which reuses the Linux TCP RTT
estimator code - reasons for this code duplication are given below.

Further details:
----------------
 1. The minimum RTO of previously one second has been replaced with TCP's, since
    RFC4341, sec. 5 says that the minimum of 1 sec. (suggested in RFC2988, 2.4)
    is not necessary. Instead, the TCP_RTO_MIN is used, which agrees with DCCP's
    concept of a default RTT (RFC 4340, 3.4). 
 2. The maximum RTO has been set to DCCP_RTO_MAX (64 sec), which agrees with 
    RFC2988, (2.5). 
 3. De-inlined the function ccid2_new_ack().
 4. Added a FIXME: the RTT is sampled several times per Ack Vector, which will
    give the wrong estimate. It should be replaced with one sample per Ack.
    However, at the moment this can not be resolved easily, since     
    - it depends on TX history code (which also needs some work),
    - the cleanest solution is not to use the `sent' time at all (saves 4 bytes
      per entry) and use DCCP timestamps / elapsed time to estimated the RTT,
      which however is non-trivial to get right (but needs to be done).

Reasons for reusing the Linux TCP estimator algorithm:   
------------------------------------------------------
Some time was spent to find a better alternative, using basic RFC2988 as a first
step. Further analysis and experimentation showed that the Linux TCP RTO
estimator is superior to a basic RFC2988 implementation. A summary is on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ccid2/rto_estimator/

In addition, this estimator fared well in a recent empirical evaluation:

    Rewaskar, Sushant, Jasleen Kaur and F. Donelson Smith.
    A Performance Study of Loss Detection/Recovery in Real-world TCP
    Implementations. Proceedings of 15th IEEE International
    Conference on Network Protocols (ICNP-07). 2007.

Thus there is significant benefit in reusing the existing TCP code.


Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:39 +02:00
Gerrit Renker e9803c0104 dccp ccid-2: Simplify dec_pipe and rearming of RTO timer
This removes the dec_pipe function and improves the way the RTO timer is rearmed
when a new acknowledgment comes in.

Details and justification for removal:
--------------------------------------
 1) The BUG_ON in dec_pipe is never triggered: pipe is only decremented for TX 
    history entries between tail and head, for which it had previously been 
    incremented in tx_packet_sent; and it is not decremented twice for the same
    entry, since it is
    - either decremented when a corresponding Ack Vector cell in state 0 or 1 
      was received (and then ccid2s_acked==1),
    - or it is decremented when ccid2s_acked==0, as part of the loss detection
      in tx_packet_recv (and hence it can not have been decremented earlier).

 2) Restarting the RTO timer happens for every single entry in each Ack Vector
    parsed by tx_packet_recv (according to RFC 4340, 11.4 this can happen up to
    16192 times per Ack Vector). 

 3) The RTO timer should not be restarted when all outstanding data has been
    acknowledged. This is currently done similar to (2), in dec_pipe, when
    pipe has reached 0.

The patch onsolidates the code which rearms the RTO timer, combining the
segments from new_ack and dec_pipe. As a result, the code becomes clearer
(compare with tcp_rearm_rto()).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker c6f0f2e71f dccp ccid-2: Remove redundant sanity tests
This removes the ccid2_hc_tx_check_sanity function: it is redundant.

Details:
========
The tx_check_sanity function performs three tests:
 1) it checks that the circular TX list is sorted
    - in ascending order of sequence number (ccid2s_seq) 
    - and time (ccid2s_sent),
    - in the direction from `tail' (hctx_seqt) to `head' (hctx_seqh);
 2) it ensures that the entire list has the length seqbufc * CCID2_SEQBUF_LEN;
 3) it ensures that pipe equals the number of packets that were not
    marked `acked' (ccid2s_acked) between `tail' and `head'.

The following argues that each of these tests is redundant, this can be verified
by going through the code.

(1) is not necessary, since both time and GSS increase from one packet to the
next, so that subsequent insertions in tx_packet_sent (which advance the `head'
pointer) will be in ascending order of time and sequence number.

In (2), the length of the list is always equal to seqbufc times CCID2_SEQBUF_LEN
(set to 1024) unless allocation caused an earlier failure, because:
 * at initialisation (tx_init), there is one chunk of size 1024 and seqbufc=1;
 * subsequent calls to tx_alloc_seq take place whenever head->next == tail in 
   tx_packet_sent; then a new chunk of size 1024 is inserted between head and
   tail, and seqbufc is incremented by one.

To show that (3) is redundant requires looking at two cases. 

The `pipe' variable of the TX socket is incremented only in tx_packet_sent, and 
decremented in tx_packet_recv.  When head == tail (TX history empty) then pipe
should be 0, which is the case directly after initialisation and after a
retransmission timeout has occurred (ccid2_hc_tx_rto_expire).

The first case involves parsing Ack Vectors for packets recorded in the live
portion of the buffer, between tail and head. For each packet marked by the
receiver as received (state 0) or ECN-marked (state 1), pipe is decremented by
one, so for all such packets the BUG_ON in tx_check_sanity will not trigger.

The second case is the loss detection in the second half of tx_packet_recv,
below the comment "Check for NUMDUPACK".

The first while-loop here ensures that the sequence number of `seqp' is either
above or equal to `high_ack', or otherwise equal to the highest sequence number
sent so far (of the entry head->prev, as head points to the next unsent entry).
The next while-loop ("while (1)") counts the number of acked packets starting
from that position of seqp, going backwards in the direction from head->prev to
tail. If NUMDUPACK=3 such packets were counted within this loop, `seqp' points
to the last acknowledged packet of these, and the "if (done == NUMDUPACK)" block
is entered next. 
The while-loop contained within that block in turn traverses the list backwards,
from head to tail; the position of `seqp' is saved in the variable `last_acked'. 
For each packet not marked as `acked', a congestion event is triggered within 
the loop, and pipe is decremented. The loop terminates when `seqp' has reached
`tail', whereupon tail is set to the position previously stored in `last_acked'.
Thus, between `last_acked' and the previous position of `tail', 
 - pipe has been decremented earlier if the packet was marked as state 0 or 1;
 - pipe was decremented if the packet was not marked as acked.
That is, pipe has been decremented by the number of packets between `last_acked'
and the previous position of `tail'. As a consequence, pipe now again reflects
the number of packets which have not (yet) been acked between the new position
of tail (at `last_acked') and head->prev, or 0 if head==tail. The result is that
the BUG_ON condition in check_sanity will also not be triggered, hence the test
(3) is also redundant.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker 83337dae6c dccp ccid-2: Stop polling
This updates CCID2 to use the CCID dequeuing mechanism, converting from
previous constant-polling to a now event-driven mechanism.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker 146993cf51 dccp: Refine the wait-for-ccid mechanism
This extends the existing wait-for-ccid routine so that it may be used with
different types of CCID. It further addresses the problems listed below.

The code looks if the write queue is non-empty and grants the TX CCID up to
`timeout' jiffies to drain the queue. It will instead purge that queue if
 * the delay suggested by the CCID exceeds the time budget;
 * a socket error occurred while waiting for the CCID;
 * there is a signal pending (eg. annoyed user pressed Control-C);
 * the CCID does not support delays (we don't know how long it will take).


                 D e t a i l s  [can be removed]
                 -------------------------------
DCCP's sending mechanism functions a bit like non-blocking I/O: dccp_sendmsg()
will enqueue up to net.dccp.default.tx_qlen packets (default=5), without waiting
for them to be released to the network.

Rate-based CCIDs, such as CCID3/4, can impose sending delays of up to maximally
64 seconds (t_mbi in RFC 3448). Hence the write queue may still contain packets
when the application closes. Since the write queue is congestion-controlled by
the CCID, draining the queue is also under control of the CCID.

There are several problems that needed to be addressed:
 1) The queue-drain mechanism only works with rate-based CCIDs. If CCID2 for
    example has a full TX queue and becomes network-limited just as the
    application wants to close, then waiting for CCID2 to become unblocked could
    lead to an indefinite  delay (i.e., application "hangs").
 2) Since each TX CCID in turn uses a feedback mechanism, there may be changes
    in its sending policy while the queue is being drained. This can lead to
    further delays during which the application will not be able to terminate.
 3) The minimum wait time for CCID3/4 can be expected to be the queue length
    times the current inter-packet delay. For example if tx_qlen=100 and a delay
    of 15 ms is used for each packet, then the application would have to wait
    for a minimum of 1.5 seconds before being allowed to exit.
 4) There is no way for the user/application to control this behaviour. It would
    be good to use the timeout argument of dccp_close() as an upper bound. Then
    the maximum time that an application is willing to wait for its CCIDs to can
    be set via the SO_LINGER option.

These problems are addressed by giving the CCID a grace period of up to the
`timeout' value.

The wait-for-ccid function is, as before, used when the application 
 (a) has read all the data in its receive buffer and
 (b) if SO_LINGER was set with a non-zero linger time, or
 (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ
     state (client application closes after receiving CloseReq).

In addition, there is a catch-all case by calling __skb_queue_purge() after 
waiting for the CCID. This is necessary since the write queue may still have
data when
 (a) the host has been passively-closed,
 (b) abnormal termination (unread data, zero linger time),
 (c) wait-for-ccid could not finish within the given time limit.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker e7937772d7 dccp: Extend CCID packet dequeueing interface
This extends the packet dequeuing interface of dccp_write_xmit() to allow
 1. CCIDs to take care of timing when the next packet may be sent;
 2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds).

The main purpose is to take CCID2 out of its polling mode (when it is network-
limited, it tries every millisecond to send, without interruption).
The interface can also be used to support other CCIDs.

The mode of operation for (2) is as follows:
 * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(),
 * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full), 
 * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER',
 * dccp_write_xmit() returns without further action;
 * after some time the wait-condition for CCID becomes true,
 * that CCID schedules the tasklet,
 * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(),
 * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now",
 * packet is sent, and possibly more (since dccp_write_xmit() loops).

Code reuse: the taskled function calls dccp_write_xmit(), the timer function
            reduces to a wrapper around the same code.

If the tasklet finds that the socket is locked, it re-schedules the tasklet
function (not the tasklet) after one jiffy.

Changed DCCP_BUG to dccp_pr_debug when transmit_skb returns an error (e.g. when a
local qdisc is used, NET_XMIT_DROP=1 can be returned for many packets).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker f4a66ca4d2 dccp: Return-value convention of hc_tx_send_packet()
This patch reorganises the return value convention of the CCID TX sending
function, to permit more flexible schemes, as required by subsequent patches.

Currently the convention is 
 * values < 0     mean error,
 * a value == 0   means "send now", and
 * a value x > 0  means "send in x milliseconds".

The patch provides symbolic constants and a function to interpret return values.
In addition, it caps the maximum positive return value to 0xFFFF milliseconds,
corresponding to 65.535 seconds. 

This is possible since in CCID-3 the maximum inter-packet gap is t_mbi = 64 sec.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:38 +02:00
Gerrit Renker c8bf462bc5 dccp ccid-2: Separate option parsing from CCID processing
This patch replaces an almost identical replication of code: large parts
of dccp_parse_options() re-appeared as ccid2_ackvector() in ccid2.c.

Apart from the duplication, this caused two more problems:
 1. CCIDs should not need to be concerned with parsing header options;
 2. one can not assume that Ack Vectors appear as a contiguous area within an
    skb, it is legal to insert other options and/or padding in between. The
    current code would throw an error and stop reading in such a case.

The patch provides a new data structure and associated list housekeeping.

Only small changes were necessary to integrate with CCID-2: data structure
initialisation, adapt list traversal routine, and add call to the provided
cleanup routine.

The latter also lead to fixing the following BUG: CCID-2 so far ignored
Ack Vectors on all packets other than Ack/DataAck, which is incorrect,
since Ack Vectors can be present on any packet that has an Ack field.

Details:
--------
 * received Ack Vectors are parsed by dccp_parse_options() alone, which passes
   the result on to the CCID-specific routine ccid_hc_tx_parse_options();
 * CCIDs interested in using/decoding Ack Vector information will add code
   to fetch parsed Ack Vectors via this interface;
 * a data structure, `struct dccp_ackvec_parsed' is provided as interface;
 * this structure arranges Ack Vectors of the same skb into a FIFO order;
 * a doubly-linked list is used to keep the required FIFO code small.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker 5a577b488f dccp ccid-2: Remove old infrastructure
This removes
 * functions for which updates have been provided in the preceding patches and
 * the @av_vec_len field - it is no longer necessary since the buffer length is
   now always computed dynamically;
 * conditional debugging code (CONFIG_IP_DCCP_ACKVEC).

The reason for removing the conditional debugging code is that Ack Vectors are 
an almost inevitable necessity - RFC 4341 says that for CCID-2, Ack Vectors must
be used. Furthermore, the code would be only interesting for coding - after some 
extensive testing with this patch set, having the debug code around is no longer
of real help.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker c2f42077bd dccp ccid-2: Schedule Sync as out-of-band mechanism
The problem with Ack Vectors is that 

  i) their length is variable and can in principle grow quite large,
 ii) it is hard to predict exactly how large they will be.

Due to the second point it seems not a good idea to reduce the MPS; in
particular when on average there is enough room for the Ack Vector and an
increase in length is momentarily due to some burst loss, after which the
Ack Vector returns to its normal/average length.

The solution taken by this patch is to subtract a minimum-expected Ack Vector
length from the MPS (previous patch), and to defer any larger Ack Vectors onto
a separate Sync - but only if indeed there is no space left on the skb.

This patch provides the infrastructure to schedule Sync-packets for transporting
(urgent) out-of-band data. Its signalling is quicker than scheduling an Ack, since
it does not need to wait for new application data.

It can thus serve other parts of the DCCP code as well.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker 283fb4a5f3 dccp ccid-2: Consolidate Ack-Vector processing within main DCCP module
This aggregates Ack Vector processing (handling input and clearing old state)
into one function, for the following reasons and benefits:
 * all Ack Vector-specific processing is now in one place;
 * duplicated code is removed;
 * ensuring sanity: from an Ack Vector point of view, it is better to clear the
                    old state first before entering new state;
 * Ack Event handling happens mostly within the CCIDs, not the main DCCP module.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker e28fe59f9c dccp ccid-2: Update code for the Ack Vector input/registration routine
This patch uupdates the code which registers new packets as received, using the
new circular buffer interface. It contributes a new algorithm which 
	* supports both tail/head pointers and buffer wrap-around and
	* deals with overflow (head/tail move in lock-step).

The updated code is also partioned differently, into
	1. dealing with the empty buffer,
	2. adding new packets into non-empty buffer,
	3. reserving space when encountering a `hole' in the sequence space,
	4. updating old state and deciding when old state is irrelevant.

Protection against large burst losses: With regard to (3), it is too costly to
reserve space when there are large bursts of losses. When bursts get too large,
the code does no longer reserve space and just fills in cells normally. This
measure reduces space consumption by a factor of 63.

The code reuses in part the previous implementation by Arnaldo de Melo.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker 68b1de1576 dccp ccid-2: Algorithm to update buffer state
This provides a routine to consistently update the buffer state when the
peer acknowledges receipt of Ack Vectors; updating state in the list of Ack
Vectors as well as in the circular buffer.

While based on RFC 4340, several additional (and necessary) precautions were
added to protect the consistency of the buffer state. These additions are
essential, since analysis and experience showed that the basic algorithm was
insufficient for this task (which lead to problems that were hard to debug).

The algorithm now
 * deals with HC-sender acknowledging to HC-receiver and vice versa,
 * keeps track of the last unacknowledged but received seqno in tail_ackno,
 * has special cases to reset the overflow condition when appropriate,
 * is protected against receiving older information (would mess up buffer state).

Note: The older code performed an unnecessary step, where the sender cleared
Ack Vector state by parsing the Ack Vector received by the HC-receiver. Doing
this was entirely redundant, since
 * the receiver always puts the full acknowledgment window (groups 2,3 in 11.4.2)
   into the Ack Vectors it sends; hence the HC-receiver is only interested in the
   highest state that the HC-sender received;
 * this means that the acknowledgment number on the (Data)Ack from the HC-sender
   is sufficient; and work done in parsing earlier state is not necessary, since
   the later state subsumes the  earlier one (see also RFC 4340, A.4).
This older interface (dccp_ackvec_parse()) is therefore removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:37 +02:00
Gerrit Renker d7dc7e5f49 dccp ccid-2: Implementation of circular Ack Vector buffer with overflow handling
This completes the implementation of a circular buffer for Ack Vectors, by 
extending the current (linear array-based) implementation.  The changes are:

 (a) An `overflow' flag to deal with the case of overflow. As before, dynamic
     growth of the buffer will not be supported; but code will be added to deal
     robustly with overflowing Ack Vector buffers.

 (b) A `tail_seqno' field. When naively implementing the algorithm of Appendix A
     in RFC 4340, problems arise whenever subsequent Ack Vector records overlap,
     which can bring the entire run length calculation completely out of synch.
     (This is documented on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/\
                                             ack_vectors/tracking_tail_ackno/ .)
 (c) The buffer lengthi is now computed dynamically (i.e. current fill level),
     as the span between head to tail.

As a result, dccp_ackvec_pending() is now simpler - the #ifdef is no longer 
necessary since buf_empty is always true when IP_DCCP_ACKVEC is not configured.

Note on overflow handling: 
-------------------------
 The Ack Vector code previously simply started to drop packets when the
 Ack Vector buffer overflowed. This means that the userspace application
 will not be able to receive, only because of an Ack Vector storage problem.
 
 Furthermore, overflow may be transient, so that applications may later
 recover from the overflow. Recovering from dropped packets is more difficult
 (e.g. video key frames).
 
 Hence the patch uses a different policy: when the buffer overflows, the oldest
 entries are subsequently overwritten. This has a higher chance of recovery.
 Details are on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ack_vectors/

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:36 +02:00
Gerrit Renker 4829007c7b dccp ccid-2: Separate internals of Ack Vectors from option-parsing code
This patch
 * separates Ack Vector housekeeping code from option-insertion code;
 * shifts option-specific code from ackvec.c into options.c;
 * introduces a dedicated routine to take care of the Ack Vector records;
 * simplifies the dccp_ackvec_insert_avr() routine: the BUG_ON was redundant, 
   since the list is automatically arranged in descending order of ack_seqno.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:36 +02:00
Gerrit Renker ff49e27089 dccp ccid-2: Ack Vector interface clean-up
This patch brings the Ack Vector interface up to date. Its main purpose is
to lay the basis for the subsequent patches of this set, which will use the
new data structure fields and routines.

There are no real algorithmic changes, rather an adaptation:

 (1) Replaced the static Ack Vector size (2) with a #define so that it can
     be adapted (with low loss / Ack Ratio, a value of 1 works, so 2 seems
     to be sufficient for the moment) and added a solution so that computing
     the ECN nonce will continue to work - even with larger Ack Vectors.

 (2) Replaced the #defines for Ack Vector states with a complete enum.

 (3) Replaced #defines to compute Ack Vector length and state with general
     purpose routines (inlines), and updated code to use these.

 (4) Added a `tail' field (conversion to circular buffer in subsequent patch).

 (5) Updated the (outdated) documentation for Ack Vector struct.

 (6) All sequence number containers now trimmed to 48 bits.

 (7) Removal of unused bits:
     * removed dccpav_ack_nonce from struct dccp_ackvec, since this is already
       redundantly stored in the `dccpavr_ack_nonce' (of Ack Vector record);
     * removed Elapsed Time for Ack Vectors (it was nowhere used);
     * replaced semantics of dccpavr_sent_len with dccpavr_ack_runlen, since
       the code needs to be able to remember the old run length; 
     * reduced the de-/allocation routines (redundant / duplicate tests).


Justification for removing Elapsed Time information [can be removed]:
---------------------------------------------------------------------
 1. The Elapsed Time information for Ack Vectors was nowhere used in the code.
 2. DCCP does not implement rate-based pacing of acknowledgments. The only
    recommendation for always including Elapsed Time is in section 11.3 of
    RFC 4340: "Receivers that rate-pace acknowledgements SHOULD [...]
    include Elapsed Time options". But such is not the case here.
 3. It does not really improve estimation accuracy. The Elapsed Time field only
    records the time between the arrival of the last acknowledgeable packet and
    the time the Ack Vector is sent out. Since Linux does not (yet) implement
    delayed Acks, the time difference will typically be small, since often the
    arrival of a data packet triggers sending feedback at the HC-receiver.


Justification for changes in de-/allocation routines [can be removed]:
----------------------------------------------------------------------
  * INIT_LIST_HEAD in dccp_ackvec_record_new was redundant, since the list
    pointers were later overwritten when the node was added via list_add();
  * dccp_ackvec_record_new() was called in a single place only;
  * calls to list_del_init() before calling dccp_ackvec_record_delete() were
    redundant, since subsequently the entire element was k-freed;
  * since all calls to dccp_ackvec_record_delete() were preceded to a call to
    list_del_init(), the WARN_ON test would never evaluate to true;
  * since all calls to dccp_ackvec_record_delete() were made from within
    list_for_each_entry_safe(), the test for avr == NULL was redundant;
  * list_empty() in ackvec_free was redundant, since the same condition is
    embedded in the loop condition of the subsequent list_for_each_entry_safe().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:36 +02:00
Gerrit Renker b8c6bcee1d dccp: Reduce noise in output and convert to ktime_t
This fixes the problem that dccp_probe output can grow quite large without
apparent benefit (many identical data points), creating huge files (up to
over one Gigabyte for a few minutes' test run) which are very hard to 
post-process (in one instance it got so bad that gnuplot ate up all memory
plus swap).

The cause for the problem is that the kprobe is inserted into dccp_sendmsg(),
which can be called in a polling-mode (whenever the TX queue is full due to
congestion-control issues, EAGAIN is returned). This creates many very 
similar data points, i.e. the increase of processing time does not increase
the quality/information of the probe output.

The fix is to attach the probe to a different function -- write_xmit was
chosen since it gets called continually (both via userspace and timer);
an input-path function would stop sampling as soon as the other end stops
sending feedback.

For comparison the output file sizes for the same 20 second test
run over a lossy link:
           * before / without patch:  118   Megabytes
           * after  / with patch:       1.2 Megabytes
and there was much less noise in the output.     

To allow backward compatibility with scripts that people use, the now-unused
`size' field in the output has been replaced with the CCID identifier. This
also serves for future compatibility - support for CCID2 is work in progress
(depends on the still unfinished SRTT/RTTVAR updates).

While at it, the update to ktime_t was also performed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:36 +02:00
Gerrit Renker a9c1656ab1 dccp: Merge now-reduced connect_init() function
After moving the assignment of GAR/ISS from dccp_connect_init() to
dccp_transmit_skb(), the former function becomes very small, so that
a merger with dccp_connect() suggests itself.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker bfbddd085a dccp: Fix the adjustments to AWL and SWL
This fixes a problem and a potential loophole with regard to seqno/ackno
validity: the problem is that the initial adjustments to AWL/SWL were
only performed at the begin of the connection, during the handshake.

Since the Sequence Window feature is always greater than Wmin=32 (7.5.2), 
it is however necessary to perform these adjustments at least for the first
W/W' (variables as per 7.5.1) packets in the lifetime of a connection.

This requirement is complicated by the fact that W/W' can change at any time
during the lifetime of a connection.

Therefore the consequence is to perform this safety check each time SWL/AWL
are updated.

A second problem solved by this patch is that the remote/local Sequence Window
feature values (which set the bounds for AWL/SWL/SWH) are undefined until the
feature negotiation has completed.

During the initial handshake we have more stringent sequence number protection,
the changes added by this patch effect that {A,S}W{L,H} are within the correct
bounds at the instant that feature negotiation completes (since the SeqWin
feature activation handlers call dccp_update_gsr/gss()). 

A detailed rationale is below -- can be removed from the commit message.


1. Server sequence number checks during initial handshake
---------------------------------------------------------
The server can not use the fields of the listening socket for seqno/ackno checks
and thus needs to store all relevant information on a per-connection basis on
the dccp_request socket. This is a size-constrained structure and has currently
only ISS (dreq_iss) and ISR (dreq_isr) defined.
Adding further fields (SW{L,H}, AW{L,H}) would increase the size of the struct
and it is questionable whether this will have any practical gain. The currently
implemented solution is as follows.
 * receiving first Request: dccp_v{4,6}_conn_request sets 
                            ISR := P.seqno, ISS := dccp_v{4,6}_init_sequence()

 * sending first Response:  dccp_v{4,6}_send_response via dccp_make_response()	
                            sets P.seqno := ISS, sets P.ackno := ISR

 * receiving retransmitted Request: dccp_check_req() overrides ISR := P.seqno

 * answering retransmitted Request: dccp_make_response() sets ISS += 1,
                                    otherwise as per first Response

 * completing the handshake: succeeds in dccp_check_req() for the first Ack
                             where P.ackno == ISS (P.seqno is not tested)

 * creating child socket: ISS, ISR are copied from the request_sock

This solution will succeed whenever the server can receive the Request and the
subsequent Ack in succession, without retransmissions. If there is packet loss,
the client needs to retransmit until this condition succeeds; it will otherwise
eventually give up. Adding further fields to the request_sock could increase
the robustness a bit, in that it would make possible to let a reordered Ack
(from a retransmitted Response) pass. The argument against such a solution is
that if the packet loss is not persistent and an Ack gets through, why not
wait for the one answering the original response: if the loss is persistent, it
is probably better to not start the connection in the first place.

Long story short: the present design (by Arnaldo) is simple and will likely work
just as well as a more complicated solution. As a consequence, {A,S}W{L,H} are
not needed until the moment the request_sock is cloned into the accept queue.

At that stage feature negotiation has completed, so that the values for the local
and remote Sequence Window feature (7.5.2) are known, i.e. we are now in a better
position to compute {A,S}W{L,H}.


2. Client sequence number checks during initial handshake
---------------------------------------------------------
Until entering PARTOPEN the client does not need the adjustments, since it 
constrains the Ack window to the packet it sent.

 * sending first Request: dccp_v{4,6}_connect() choose ISS, 
                          dccp_connect() then sets GAR := ISS (as per 8.5),
			  dccp_transmit_skb() (with the previous bug fix) sets
			         GSS := ISS, AWL := ISS, AWH := GSS
 * n-th retransmitted Request (with previous patch):
	                  dccp_retransmit_skb() via timer calls
			  dccp_transmit_skb(), which sets GSS := ISS+n
                          and then AWL := ISS, AWH := ISS+n
	                  
 * receiving any Response: dccp_rcv_request_sent_state_process() 
	                   -- accepts packet if AWL <= P.ackno <= AWH;
			   -- sets GSR = ISR = P.seqno

 * sending the Ack completing the handshake: dccp_send_ack() calls 
                           dccp_transmit_skb(), which sets GSS += 1
			   and AWL := ISS, AWH := GSS
			   

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker 2975abd251 dccp: Schedule an Ack when receiving timestamps
This schedules an Ack when receiving a timestamp, exploiting the
existing inet_csk_schedule_ack() function, saving one case in the
`dccp_ack_pending()' function.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker d0995e6a9e dccp ccid-3: Remove dead states
This patch is thanks to an investigation by Leandro Sales de Melo and his
colleagues. They worked out two state diagrams which highlight the fact that
the xxx_TERM states in CCID-3/4 are in fact not necessary.

And this can be confirmed by in turn looking at the code: the xxx_TERM states
are only ever set in ccid3_hc_{rx,tx}_exit(). These two functions are part
of the following call chain:

 * ccid_hc_{tx,rx}_exit() are called from ccid_delete() only;
 * ccid_delete() invokes ccid_hc_{tx,rx}_exit() in the way of a destructor:
   after calling ccid_hc_{tx,rx}_exit(), the CCID is released from memory;
 * ccid_delete() is in turn called only by ccid_hc_{tx,rx}_delete();
 * ccid_hc_{tx,rx}_delete() is called only if 
   - feature negotiation failed   (dccp_feat_activate_values()),
   - when changing the RX/TX CCID (to eject the current CCID),
   - when destroying the socket   (in dccp_destroy_sock()).

In other words, when CCID-3 sets the state to xxx_TERM, it is at a time where
no more processing should be going on, hence it is not necessary to introduce
a dedicated exit state - this is implicit when unloading the CCID.

The patch removes this state, one switch-statement collapses as a result.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker 5fe94963a1 dccp ccid-3: Remove duplicate documentation
This removes RX-socket documentation which is either duplicate or non-existent.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker c506d91d9a dccp: Unused argument in CCID tx function
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was
nowhere used in the entire code.

(Anecdotally, this argument was not even used in the original KAME code where
 the function originally came from; compare the variable moreToSend in the
 freebsd61-dccp-kame-28.08.2006.patch now maintained by Emmanuel Lochin.)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:35 +02:00
Gerrit Renker f10ecaee6d dccp: Replace magic CCID-specific numbers by symbolic constants
The constants DCCPO_{MIN,MAX}_CCID_SPECIFIC are nowhere used in the code, but
instead for the CCID-specific options numbers are used.

This patch unifies the use of CCID-specific option numbers, by adding symbolic
names reflecting the definitions in RFC 4340, 10.3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker ce177ae2e6 dccp ccid-3: Remove redundant 'options_received' struct
The `options_received' struct is redundant, since it re-duplicates the existing
`p' and `x_recv' fields. This patch removes the sub-struct and migrates the
format conversion operations (cf. below) to ccid3_hc_tx_parse_options().

                     Why the fields are redundant
                     ----------------------------
The Loss Event Rate p and the Receive Rate x_recv are initially 0 when first 
loading CCID-3, as ccid_new() zeroes out the entire ccid3_hc_tx_sock. 

When Loss Event Rate or Receive Rate options are received, they are stored by
ccid3_hc_tx_parse_options() into the fields `ccid3or_loss_event_rate' and
`ccid3or_receive_rate' of the sub-struct `options_received' in ccid3_hc_tx_sock.

After parsing (considering only the established state - dccp_rcv_established()),
the packet is passed on to ccid_hc_tx_packet_recv(). This calls the CCID-3
specific routine ccid3_hc_tx_packet_recv(), which performs the following copy
operations between fields of ccid3_hc_tx_sock:

 * hctx->options_received.ccid3or_receive_rate is copied into hctx->x_recv,
   after scaling it for fixpoint arithmetic, by 2^64;
 * hctx->options_received.ccid3or_loss_event_rate is copied into hctx->p,
   considering the above special cases; in addition, a value of 0 here needs to
   be mapped into p=0 (when no Loss Event Rate option has been received yet).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker 535c55df13 dccp tfrc/ccid-3: Computing Loss Rate from Loss Event Rate
This adds a function to take care of the following cases occurring in the
computation of the Loss Rate p:

 * 1/(2^32-1) is mapped into 0% as per RFC 4342, 8.5;
 * 1/0        is mapped into the maximum of 100%;
 * we want to avoid that p = 1/x is rounded down to 0 when x is very large,
   since this means accidentally re-entering slow-start (indicated by p==0).

In the last case, the minimum-resolution value of p is returned.

Furthermore, a bug in ccid3_hc_rx_getsockopt is fixed (1/0 was mapped into ~0U),
which now allows to consistently print the scaled p-values as

        printf("Loss Event Rate = %u.%04u %%\n", rx_info.tfrcrx_p / 10000, 
                                                 rx_info.tfrcrx_p % 10000);

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker 3306c781ff dccp: Add packet type information to CCID-specific option parsing
This patch ...
 1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is 
    necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state
    which options may (not) appear on what packet type.
 
 2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in
    RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets")
    and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets").

 3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This
    is also no longer necessary, since the CCID-specific option-parsing routines
    are passed every single parameter of the type-length-value option encoding.

Also added documentation and made argument naming scheme consistent.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker 47a61e7b43 dccp ccid-3: Simplify and consolidate tx_parse_options
This simplifies and consolidates the TX option-parsing code:

 1. The Loss Intervals option is not currently used, so dead code related to
    this option is removed. I am aware of no plans to support the option, but
    if someone wants to implement it (e.g. for inter-op tests), it is better
    to start afresh than having to also update currently unused code.

 2. The Loss Event and Receive Rate options have a lot of code in common (both
    are 32 bit, both have same length etc.), so this is consolidated.

 3. The test against GSR is not necessary, because
    - on first loading CCID3, ccid_new() zeroes out all fields in the socket; 
    - ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to

	pinv = opt_recv->ccid3or_loss_event_rate;
	if (pinv == ~0U || pinv == 0)
		hctx->p = 0;

    - as a result, the sequence number field is removed from opt_recv.
 
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker 63b3a73bb8 dccp ccid-3: Remove ugly RTT-sampling history lookup
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since

 1. it suffered from complex passing of return values (the return value both
    indicated successful lookup while the value doubled as RTT sample);

 2. when for some odd reason the sample value equalled 0, this triggered a bug
    warning about "bogus Ack", due to the ambiguity of the return value;

 3. on a passive host which has not sent anything the TX history is empty and
    thus will lead to unwanted "bogus Ack" warnings such as
    ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148
    ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606.

The fix is to replace the implicit encoding by performing the steps manually.					       

Furthermore, the "bogus Ack" warning has been removed, since it can actually be
triggered due to several reasons (network reordering, old packet, (3) above),
hence it is not very useful.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:34 +02:00
Gerrit Renker de6f2b59e5 dccp ccid-3: Bug fix for the inter-packet scheduling algorithm
This fixes a subtle bug in the calculation of the inter-packet gap and shows
that t_delta, as it is currently used, is not needed. And hence replaced.

The algorithm from RFC 3448, 4.6 below continually computes a send time t_nom,
which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies
the scheduling granularity, s the packet size, and X the sending rate:

  t_distance = t_nom - t_now;		// in microseconds
  t_delta    = min(t_ipi, t_gran) / 2;	// `delta' parameter in microseconds

  if (t_distance >= t_delta) {
	reschedule after (t_distance / 1000) milliseconds;
  } else {
  	t_ipi  = s / X;			// inter-packet interval in usec
	t_nom += t_ipi;			// compute the next send time
	send packet now;
  }


1) Description of the bug
-------------------------
Rescheduling requires a conversion into milliseconds, due to this call chain:

 * ccid3_hc_tx_send_packet() returns a timeout in milliseconds,
 * this value is converted by msecs_to_jiffies() in dccp_write_xmit(),
 * and finally used as jiffy-expires-value for sk_reset_timer().

The highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher
granularity does not make much sense here.

As a consequence, values of t_distance < 1000 are truncated to 0. This issue 
has so far been resolved by using instead

  if (t_distance >= t_delta + 1000)
	reschedule after (t_distance / 1000) milliseconds;

The bug is in artificially inflating t_delta to t_delta' = t_delta + 1000. This
is unnecessarily large, a more adequate value is t_delta' = max(t_delta, 1000).


2) Consequences of using the corrected t_delta'
-----------------------------------------------
Since t_delta <= t_gran/2 = 10^6/(2*HZ), we have t_delta <= 1000 as long as
HZ >= 500. This means that t_delta' = max(1000, t_delta) is constant at 1000.

On the other hand, when using a coarse HZ value of HZ < 500, we have three
sub-cases that can all be reduced to using another constant of t_gran/2.

 (a) The first case arises when t_ipi > t_gran. Here t_delta' is the constant
     t_delta' = max(1000, t_gran/2) = t_gran/2.

 (b) If t_ipi <= 2000 < t_gran = 10^6/HZ usec, then t_delta = t_ipi/2 <= 1000,
     so that t_delta' = max(1000, t_delta) = 1000 < t_gran/2. 

 (c) If 2000 < t_ipi <= t_gran, we have t_delta' = max(t_delta, 1000) = t_ipi/2.

In the second and third cases we have delay values less than t_gran/2, which is
in the order of less than or equal to half a jiffy. 

How these are treated depends on how fractions of a jiffy are handled: they
are either always rounded down to 0, or always rounded up to 1 jiffy (assuming
non-zero values). In both cases the error is on average in the order of 50%.

Thus we are not increasing the error when in the second/third case we replace
a value less than t_gran/2 with 0, by setting t_delta' to the constant t_gran/2.


3) Summary
----------
Fixing (1) and considering (2), the patch replaces t_delta with a constant,
whose value depends on CONFIG_HZ, changing the above algorithm to:
 
  if (t_distance >= t_delta')
	reschedule after (t_distance / 1000) milliseconds;

where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:33 +02:00
Gerrit Renker b2e317f4b5 dccp ccid-3: No more CCID control blocks in LISTEN state
The CCIDs are activated as last of the features, at the end of the handshake,
were the LISTEN state of the master socket is inherited into the server
state of the child socket. Thus, the only states visible to CCIDs now are
OPEN/PARTOPEN, and the closing states.

This allows to remove tests which were previously necessary to protect
against referencing a socket in the listening state (in CCID3), but which
now have become redundant.

As a further byproduct of enabling the CCIDs only after the connection has been
fully established, several typecast-initialisations of ccid3_hc_{rx,tx}_sock
can now be eliminated:
 * the CCID is loaded, so it is not necessary to test if it is NULL,
 * if it is possible to load a CCID and leave the private area NULL, then this
    is a bug, which should crash loudly - and earlier,
 * the test for state==OPEN || state==PARTOPEN now reduces only to the closing
   phase (e.g. when the node has received an unexpected Reset).		  

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:33 +02:00
Gerrit Renker 842d1ef14f dccp ccid-3: Remove ccid3hc{tx,rx}_ prefixes
This patch does the same for CCID-3 as the previous patch for CCID-2:

        s#ccid3hctx_##g;
        s#ccid3hcrx_##g;

plus manual editing to retain consistency.

Please note: expanded the fields of the `struct tfrc_tx_info' in the hc_tx_sock,
since using short #define identifiers is not a good idea. The only place where
this embedded struct was used is ccid3_hc_tx_getsockopt().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:33 +02:00
Gerrit Renker 1fb8750960 dccp ccid-2: Remove ccid2hc{tx,rx}_ prefixes
This patch fixes two problems caused by the ubiquitous long "hctx->ccid2htx_"
and "hcrx->ccid2hcrx_" prefixes:
 * code becomes hard to read;
 * multiple-line statements are almost inevitable even for simple expressions;
The prefixes are not really necessary (compare with "struct tcp_sock").

There had been previous discussion of this on dccp@vger, but so far this was
not followed up (most people agreed that the prefixes are too long). 

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Leandro Melo de Sales <leandroal@gmail.com>
2008-09-04 07:45:33 +02:00
Gerrit Renker 88ddac513a dccp: Special case of the MPS for client-PARTOPEN with DataAcks
To increase robustness, it is necessary to resend Confirm feature-negotiation
options, even though the RFC does not mandate it. But feature negotiation
options can take (much) more room than the options on common DataAck packets.

Instead of reducing the MPS always for a case which only applies to the three
messages send during initial handshake, this patch devises a special case:

   if the payload length of the DataAck in PARTOPEN is too large, an Ack is sent
   to carry the options, and the feature-negotiation list is then flushed.

   This means that the server gets two Acks for one Response. If both Acks get
   lost, it is probably better to restart the connection anyway and devising yet
   another special-case does not seem worth the extra complexity.

The patch (over-)estimates the expected overhead to be 32*4 bytes -- commonly
seen values were 20-90 bytes for initial feature-negotiation options. 

It uses sizeof(u32) to mean "aligned units of 4 bytes". For consistency,
another use of sizeof is modified.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:33 +02:00
Gerrit Renker 55ebe3ab2d dccp: Leave headroom for options when calculating the MPS
The Maximum Packet Size (MPS) is of interest for applications which want
to transfer data, so it is only relevant to the data transfer phase of a
connection (unless one wants to send data on the DCCP-Request, but that is
not considered here).

The strategy chosen to deal with this requirement is to leave room for only 
such options that may appear on data packets.

A special consideration applies to Ack Vectors: this is purely guesswork,
since these can have any length between 3 and 1020 bytes. The strategy
chosen here is to subtract a configurable minimum, the value of 16 bytes
(2 bytes for type/length plus 14 Ack Vector cells) has been found by 
experimentatation. If people experience this as too much or too little,
this could later be turned into a Kconfig option.	

There are currently no CCID-specific header options which may appear on data
packets, hence it is not necessary to define a corresponding CCID field.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:33 +02:00
Gerrit Renker 2faae5587f dccp ccid-2: Use feature-negotiation to report Ack Ratio changes
This uses the new feature-negotiation framework to signal Ack Ratio changes,
as required by RFC 4341, sec. 6.1.2.

This raises some problems for CCID-2 since it can at the moment not cope
gracefully with Ack Ratio of e.g. 2. A FIXME has thus been added which
reverts to the existing policy of bypassing the Ack Ratio sysctl.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 4861a35443 dccp: Support for exchanging of NN options in established state
This patch provides support for the reception of NN options in (PART)OPEN state. 

It is a combination of change_recv() and confirm_recv(), specifically geared
towards receiving the `fast-path' NN options.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 624a965a93 dccp: Support for the exchange of NN options in established state
In contrast to static feature negotiation at the begin of a connection, which
establishes the capabilities of both endpoints, this patch introduces support
for dynamic exchange of feature negotiation options.

Such a dynamic exchange is necessary in at least two cases:
 * CCID-2's Ack Ratio (RFC 4341, 6.1.2) which changes during the connection;
 * Sequence Window values that, as per RFC 4340, 7.5.2, should be sent "as
   as the connection progresses".

Both are NN (non-negotiable) features. Hence dynamic feature "negotiation" is
distinguished from static/pre-connection negotiation by the following:
 * no new capabilities are negotiated (those that matter for the connection
   are negotiated prior to setting up the connection, comparable to SIP);
 * features must be understood by each endpoint: as per RFC 4340, 6.4, 
   Sequence Window is "Req'd" and Ack Ratio must be understood when CCID-2
   is used as per the note underneath Table 4.

These characteristics are reflected in the implementation:
 * only NN options can be exchanged after connection setup;
 * NN options are activated directly after validating them. The rationale is
   that a peer must accept every valid NN value (RFC 4340, 6.3.2), hence it
   will either accept the value and send a "Confirm R", or it will send an
   empty Confirm (which will reset the connection according to FN rules). 
 * An Ack is scheduled directly after activation to accelerate communicating
   the update to the peer.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 76f738a795 dccp: Debugging functions for feature negotiation
Since all feature-negotiation processing now takes place in feat.c, functions
for producing verbose debugging output are concentrated there.

New functions to print out values, entry records, and options are provided,
and also a macro is defined to not always have the function name in the
output line.

Thanks a lot to Wei Yongjun and Giuseppe Galeota for help with errors in an
earlier revision of this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 0a4822679d dccp: Initialisation and type-checking of feature sysctls
This patch takes care of initialising and type-checking sysctls related to
feature negotiation. Type checking is important since some of the sysctls
now directly act on the feature-negotiation process.

The sysctls are initialised with the known default values for each feature.
For the type-checking the value constraints from RFC 4340 are used:

 * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes),
   tested and confirmed that it works up to 4294967295 - for Gbps speed;
 * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer);
 * CCIDs are between 0 .. 255;
 * request_retries, retries1, retries2 also between 0..255 for good measure;
 * tx_qlen is checked to be non-negative;
 * sync_ratelimit remains as before.

Further changes:
----------------
Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 51c7d4fa26 dccp: Implement both feature-local and feature-remote Sequence Window feature
This adds full support for local/remote Sequence Window feature, from which the 
  * sequence-number-validity (W) and 
  * acknowledgment-number-validity (W') windows 
derive as specified in RFC 4340, 7.5.3. 

Specifically, the following changes are introduced:
  * integrated new socket fields into dccp_sk;
  * updated the update_gsr/gss routines with regard to these fields;
  * updated handler code: the Sequence Window feature is located at the TX side,
    so the local feature is meant if the handler-rx flag is false;
  * the initialisation of `rcv_wnd' in reqsk is removed, since
    - rcv_wnd is not used by the code anywhere;
    - sequence number checks are not done in the LISTEN state (cf. 7.5.3);
    - dccp_check_req checks the Ack number validity more rigorously;
  * the `struct dccp_minisock' became empty and is now removed.

Until the handshake completes with activating negotiated values, the local/remote
Sequence-Window values are undefined and thus can not reliably be estimated.
This issue is addressed in a separate patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:32 +02:00
Gerrit Renker 09856c1089 dccp: Auto-load (when supported) CCID plugins for negotiation
This adds auto-loading of CCIDs (when module loading is enabled) 
for the purpose of feature negotiation. 

The problem with loading the CCIDs at the end of feature negotiation is
that this would happen in software interrupt context. Besides, if the host
advertises CCIDs during negotiation, it should have them ready to use, in
case an agreeing peer wants to use it for the connection.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:31 +02:00
Gerrit Renker 5d3dac267a dccp: Initialisation framework for feature negotiation
This initialises feature negotiation from two tables, which are initialised
from sysctls. 

As a novel feature, specifics of the implementation (e.g. currently short
seqnos and ECN are not supported) are advertised for robustness.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:31 +02:00
Gerrit Renker b235dc4abb dccp ccid-2: Phase out the use of boolean Ack Vector sysctl
This removes the use of the sysctl and the minisock variable for the Send Ack
Vector feature, which is now handled fully dynamically via feature negotiation;
i.e. when CCID2 is enabled, Ack Vectors are automatically enabled (as per
RFC 4341, 4.).

Using a sysctl in parallel to this implementation would open the door to
crashes, since much of the code relies on tests of the boolean minisock /
sysctl variable. Thus, this patch replaces all tests of type

	if (dccp_msk(sk)->dccpms_send_ack_vector)
		/* ... */
with
	if (dp->dccps_hc_rx_ackvec != NULL)
		/* ... */

The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature
negotiation concluded that Ack Vectors are to be used on the half-connection.
Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child),
so that the test is a valid one.

The activation handler for Ack Vectors is called as soon as the feature
negotiation has concluded at the
 * server when the Ack marking the transition RESPOND => OPEN arrives;
 * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN.

Adding the sequence number of the Response packet to the Ack Vector has been 
removed, since
 (a) connection establishment implies that the Response has been received;
 (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e.
     this entry will always be ignored;
 (c) it can not be used for anything useful - to detect loss for instance, only
     packets received after the loss can serve as pseudo-dupacks.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:31 +02:00
Gerrit Renker 68e074bfce dccp: Remove manual influence on NDP Count feature
Updating the NDP count feature is handled automatically now:
 * for CCID-2 it is disabled, since the code does not use NDP counts;
 * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths.

Allowing the user to change NDP values leads to unpredictable and failing
behaviour, since it is then possible to disable NDP counts even when they
are needed (e.g. in CCID-3).

This means that only those user settings are sensible that agree with the
values for Send NDP Count implied by the choice of CCID. But those settings
are already activated by the feature negotiation (CCID dependency tracking),
hence this form of support is redundant.

At startup the initialisation of the NDP count feature is with the default
value of 0, which is done implicitly by the zeroing-out of the socket when
it is allocated. If the choice of CCID or feature negotiation enables NDP
count, this will then be updated via the NDP activation handler.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:31 +02:00
Gerrit Renker 78673e24df dccp: Remove obsolete parts of the old CCID interface
The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector
case, their value equals initially that of the sysctl, but at the end of
feature negotiation may be something different.

The old interface removed by this patch thus has been replaced by the newer
interface to dynamically query the currently loaded CCIDs earlier in this
patch set.

Also removed the constructors for the TX CCID and the RX CCID, since the
switch rx/non-rx is done by the handler in minisocks.c (and the handler is
the only place in the code where CCIDs are loaded).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:31 +02:00
Gerrit Renker 23479cbfd3 dccp: Clean up old feature-negotiation infrastructure
The code removed by this patch is no longer referenced or used, the added
lines update documentation and copyrights.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:30 +02:00
Gerrit Renker c49b22729f dccp: Integration of dynamic feature activation - part 3 (client side)
This integrates feature-activation in the client, with these details:

 1. When dccp_parse_options() fails, the reset code is already set, request_sent
    _state_process() currently overrides this with `Packet Error', which is not
    intended - so changed to use the reset code set in dccp_parse_options();

 2. There was a FIXME to change the error code when dccp_ackvec_add() fails.
    I have looked this up and found that: 
    * the check whether ackno < ISN is already made earlier,
    * this Response is likely the 1st packet with an Ackno that the client gets,
    * so when dccp_ackvec_add() fails, the reason is likely not a packet error.

 3. When feature negotiation fails, the socket should be marked as not usable,
    so that the application is notified that an error occurs. This is achieved
    by a new label, which uses an error code of `Aborted' and which sets the
    socket state to CLOSED, as well as sk_err.

 4. Avoids parsing the Ack twice in Respond state by not doing option processing
    again in dccp_rcv_respond_partopen_state_process (as option processing has
    already been done on the request_sock in dccp_check_req).    

Since this addresses congestion-control initialisation, a corresponding
FIXME has been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:30 +02:00
Gerrit Renker e70cacb90d dccp: Integration of dynamic feature activation - part 2 (server side)
This patch integrates the activation of features at the end of negotiation
into the server-side code.

Note: 
  In dccp_create_openreq_child the request_sock argument is no longer constant,
  since dccp_activate_values() uses the feature-negotiation list on dreq to sort
  out the initialisation values for the different features of the child socket;
  and purges this queue after use (but the `req' argument to openreq_child
  can and does still remain constant).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:30 +02:00
Gerrit Renker 3a53a9adfa dccp: Integration of dynamic feature activation - part 1 (socket setup)
This first patch out of three replaces the hardcoded default settings with
initialisation code for the dynamic feature negotiation.

Note on retransmitting Confirm options:
---------------------------------------
This patch also defers flushing the client feature-negotiation queue,
due to the following considerations.

As long as the client is in PARTOPEN, it needs to retransmit the Confirm
options for the Change options received on the DCCP-Response from the server.

Otherwise, if the packet containing the Confirm options gets dropped in the 
network, the connection aborts due to undefined feature negotiation state.

Thanks to Leandro Melo de Sales who reported a bug in an earlier revision
of the patch set, resulting from not retransmitting the Confirm options.

The patch now ensures that the client feature-negotiation queue is flushed only
when entering the OPEN state. Since confirmed Change options are removed as
soon as they are confirmed (in the DCCP-Response), this ensures that Confirm
options are retransmitted.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:30 +02:00
Gerrit Renker c926c6aed3 dccp: Feature activation handlers
This patch provides the post-processing of feature negotiation state, after
the negotiation has completed.

To this purpose, handlers are used and added to the dccp_feat_table. Each
handler is passed a boolean flag whether the RX or TX side of the feature
is meant.

Several handlers are provided already, new handlers can easily be added.

The initialisation is now fully dynamic, i.e. CCIDs are activated only
after the feature negotiation. The integration of this dynamic activation
is done in the subsequent patches.

Thanks to Wei Yongjun for pointing out the necessity of skipping over empty
Confirm options while copying the negotiated feature values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:30 +02:00
Gerrit Renker d2150b7bff dccp: Processing Confirm options
Analogous to the previous patch, this adds code to interpret incoming Confirm
feature-negotiation options. Both functions operate on the feature-negotiation
list of either the request_sock (server) or the dccp_sock (client).

Thanks to Wei Yongjun for pointing out that it is overly restrictive to check
the entire list of confirmed SP values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:29 +02:00
Gerrit Renker 5a146b97d5 dccp: Process incoming Change feature-negotiation options
This adds/replaces code for processing incoming ChangeL/R options.
The main difference is that:
 * mandatory FN options are now interpreted inside the function
  (there are too many individual cases to do this externally);
 * the function returns an appropriate Reset code or 0,
   which is then used to fill in the data for the Reset packet.

Old code, which is no longer used or referenced, has been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:29 +02:00
Gerrit Renker c664d4f4e2 dccp: Preference list reconciliation
This provides two functions to
 * reconcile preference lists (with appropriate return codes) and
 * reorder the preference list if successful reconciliation changed the
   preferred value.

The patch also removes the old code for processing SP/NN Change options, since
new code to process these is mostly there already; related references have been
commented out.

The code for processing Change options follows in the next patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:29 +02:00
Gerrit Renker f8a644c07e dccp: Integrate feature-negotiation insertion code
The patch implements insertion of feature negotiation at the server (listening
and request socket) and the client (connecting socket).

In dccp_insert_options(), several statements have been grouped together now
to achieve (I hope) better efficiency by reducing the number of tests each
packet has to go through:
 - Ack Vectors are sent if the packet is neither a Data or a Request packet;
 - a previous issue is corrected - feature negotiation options are allowed
   on DataAck packets (5.8).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:29 +02:00
Gerrit Renker 0ef118a017 dccp: Insert feature-negotiation options into skb
This patch replaces the earlier insertion routine from options.c, so that
code specific to feature negotiation can remain in feat.c. This is possible
by calling a function already existing in options.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:29 +02:00
Gerrit Renker cf9ddf73b9 dccp: Header option insertion routine for feature-negotiation
The patch extends existing code:
 * Confirm options divide into the confirmed value plus an optional preference
   list for SP values. Previously only the preference list was echoed for SP
   values, now the confirmed value is added as per RFC 4340, 6.1;
 * length and sanity checks are added to avoid illegal memory (or NULL) access.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:29 +02:00
Gerrit Renker d0440ee6f6 dccp: Support for Mandatory options
Support for Mandatory options is provided by this patch, which will
be used by subsequent feature-negotiation patches.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2008-09-04 07:45:28 +02:00
Gerrit Renker b9aaac1c53 dccp: Increase the scope of variable-length htonl/ntohl functions
This extends the scope of two available functions, encode|decode_value_var,
to work up to 6 (8) bytes, to match maximum requirements in the RFC.

These functions are going to be used both by general option processing and 
feature negotiation code, hence declarations have been put into feat.h.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2008-09-04 07:45:28 +02:00
Gerrit Renker c8041e264b dccp: API to query the current TX/RX CCID
This provides function to query the current TX/RX CCID dynamically, without
reliance on the minisock value, using dynamic information available in the
currently loaded CCID module.

This query function is then used to 
 (a) provide the getsockopt part for getting/setting CCIDs via sockopts;
 (b) replace the current test for "which CCID is in use" in probe.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:28 +02:00
Gerrit Renker fade756f18 dccp: Set per-connection CCIDs via socket options
With this patch, TX/RX CCIDs can now be changed on a per-connection basis, which
overrides the defaults set by the global sysctl variables for TX/RX CCIDs.

To make full use of this facility, the remaining patches of this patch set are
needed, which track dependencies and activate negotiated feature values.

Note on the maximum number of CCIDs that can be registered:
-----------------------------------------------------------
The maximum number of CCIDs that can be registered on the socket is constrained
by the space in a Confirm/Change feature negotiation option. 

The space in these in turn depends on the size of header options as defined
in RFC 4340, 5.8. Since this is a recurring constant, it has been moved from
ackvec.h into linux/dccp.h, clarifying its purpose.

Relative to this size, the maximum number of CCID identifiers that can be 
present in a Confirm option (which always consumes 1 byte more than a Change
option, cf. 6.1) is 2 bytes less than the maximum TLV size: one for the
CCID-feature-type and one for the selected value.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:28 +02:00
Gerrit Renker 73bbe095bb dccp: Tidy up setsockopt calls
This splits the setsockopt calls into two groups, depending on whether an
integer argument (val) is required and whether routines being called do
their own locking.

Some options (such as setting the CCID) use u8 rather than int, so that for
these the test with regard to integer-sizeof can not be used.

The second switch-case statement now only has those statements which need
locking and which make use of `val'.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
2008-09-04 07:45:28 +02:00
Gerrit Renker 17c30b40ed dccp: Deprecate Ack Ratio sysctl
This patch deprecates the Ack Ratio sysctl, since
 * Ack Ratio is entirely ignored by CCID-3 and CCID-4,
 * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1);
 * even if it would work in CCID-2, there is no point for a user to change it:
   - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2),
   - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts 
     (since waiting for Acks which will never arrive in this window),
   - cwnd is not a user-configurable value.	

The only reasonable place for Ack Ratio is to print it for debugging. It is
planned to do this later on, as part of e.g. dccp_probe.

With this patch Ack Ratio is now under full control of feature negotiation:
 * Ack Ratio is resolved as a dependency of the selected CCID;
 * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to
   the default of 2, following RFC 4340, 11.3 - "New connections start with Ack
   Ratio 2 for both endpoints";
 * what happens then is part of another patch set, since it concerns the 
   dynamic update of Ack Ratio while the connection is in full flight.

Thanks to Tomasz Grobelny for discussion leading up to this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2008-09-04 07:45:28 +02:00
Gerrit Renker 20f41eee82 dccp: Feature negotiation for minimum-checksum-coverage
This provides feature negotiation for server minimum checksum coverage
which so far has been missing.

Since sender/receiver coverage values range only from 0...15, their
type has also been reduced in size from u16 to u4.

Feature-negotiation options are now generated for both sender and receiver
coverage, i.e. when the peer has `forgotten' to enable partial coverage
then feature negotiation will automatically enable (negotiate) the partial
coverage value for this connection.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:27 +02:00
Gerrit Renker 668144f7b4 dccp: Deprecate old setsockopt framework
The previous setsockopt interface, which passed socket options via struct 
dccp_so_feat, is complicated/difficult to use. Continuing to support it leads to
ugly code since the old approach did not distinguish between NN and SP values.

This patch removes the old setsockopt interface and replaces it with two new
functions to register NN/SP values for feature negotiation. These are 
essentially wrappers around the internal __feat_register functions, with 
checking added to avoid
 * wrong usage (type);
 * changing values while the connection is in progress.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:27 +02:00
Gerrit Renker d4c8741c43 dccp: Mechanism to resolve CCID dependencies
This adds a hook to resolve features whose value depends on the choice of
CCID. It is done at the server since it can only be done after the CCID
values have been negotiated; i.e. the client will add its CCID preference
list on the Change options sent in the Request, which will be reconciled
with the local preference list of the server.

The concept is documented on 
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
				implementation_notes.html#ccid_dependencies

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:27 +02:00
Gerrit Renker 093e1f46cf dccp: Resolve dependencies of features on choice of CCID
This provides a missing link in the code chain, as several features implicitly
depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector
feature, but also Ack Ratio and Send Loss Event Rate (also taken care of).

For Send Ack Vector, the situation is as follows:
 * since CCID2 mandates the use of Ack Vectors, there is no point in allowing 
   endpoints which use CCID2 to disable Ack Vector features such a connection;

 * a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer
   with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4);

 * for all other CCIDs, the use of (Send) Ack Vector is optional and thus
   negotiable. However, this implies that the code negotiating the use of Ack
   Vectors also supports it (i.e. is able to supply and to either parse or
   ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack
   Vector support), the use of Ack Vectors is here disabled, with a comment
   in the source code.

An analogous consideration arises for the Send Loss Event Rate feature,
since the CCID-3 implementation does not support the loss interval options
of RFC 4342. To make such use explicit, corresponding feature-negotiation
options are inserted which signal the use of the loss event rate option,
as it is used by the CCID3 code.

Lastly, the values of the Ack Ratio feature are matched to the choice of CCID.

The patch implements this as a function which is called after the user has
made all other registrations for changing default values of features.

The table is variable-length, the reserved (and hence for feature-negotiation
invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0'
is used to mark the end of the table.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:27 +02:00
Gerrit Renker 71bb49596b dccp: Query supported CCIDs
This provides a data structure to record which CCIDs are locally supported
and three accessor functions:
 - a test function for internal use which is used to validate CCID requests
   made by the user;
 - a copy function so that the list can be used for feature-negotiation;   
 - documented getsockopt() support so that the user can query capabilities.

The data structure is a table which is filled in at compile-time with the
list of available CCIDs (which in turn depends on the Kconfig choices).

Using the copy function for cloning the list of supported CCIDs is useful for
feature negotiation, since the negotiation is now with the full list of available
CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation 
will not fail if the peer requests to use CCID3 instead of CCID2. 

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:27 +02:00
Gerrit Renker 86349c8d9c dccp: Registration routines for changing feature values
Two registration routines, for SP and NN features, are provided by this patch,
replacing a previous routine which was used for both feature types.

These are internal-only routines and therefore start with `__feat_register'.

It further exports the known limits of Sequence Window and Ack Ratio as symbolic
constants.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:27 +02:00
Gerrit Renker 5591d28628 dccp: Limit feature negotiation to connection setup phase
This patch starts the new implementation of feature negotiation:
 1. Although it is theoretically possible to perform feature negotiation at any
    time (and RFC 4340 supports this), in practice this is prohibitively complex,
    as it requires to put traffic on hold for each new negotiation.
 2. As a byproduct of restricting feature negotiation to connection setup, the
    feature-negotiation retransmit timer is no longer required. This part is now
    mapped onto the protocol-level retransmission.
    Details indicating why timers are no longer needed can be found on
    http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
	                                      implementation_notes.html

This patch disables anytime negotiation, subsequent patches work out full
feature negotiation support for connection setup.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04 07:45:27 +02:00
Gerrit Renker 702083839b dccp: Cleanup routines for feature negotiation
This inserts the required de-allocation routines for memory allocated by 
feature negotiation in the socket destructors, replacing dccp_feat_clean()
in one instance.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:26 +02:00
Gerrit Renker 828755cee0 dccp: Per-socket initialisation of feature negotiation
This provides feature-negotiation initialisation for both DCCP sockets and
DCCP request_sockets, to support feature negotiation during connection setup.

It also resolves a FIXME regarding the congestion control initialisation.

Thanks to Wei Yongjun for help with the IPv6 side of this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:26 +02:00
Gerrit Renker 3001fc0569 dccp: List management for new feature negotiation
This adds list fields and list management functions for the new feature
negotiation implementation. The new code is kept in parallel to the old
code, until removed at the end of the patch set.

Thanks to Arnaldo for suggestions to improve the code.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:26 +02:00
Gerrit Renker b4eec20637 dccp: Implement lookup table for feature-negotiation information
A lookup table for feature-negotiation information, extracted from RFC 4340/42,
is provided by this patch. All currently known features can be found in this 
table, along with their feature location, their default value, and type.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:26 +02:00
Gerrit Renker 5c7c9451f1 dccp: Basic data structure for feature negotiation
This patch prepares for the new and extended feature-negotiation routines.

The following feature-negotiation data structures are provided:
	* a container for the various (SP or NN) values,
	* symbolic state names to track feature states,
	* an entry struct which holds all current information together,
	* elementary functions to fill in and process these structures.

Entry structs are arranged as FIFO for the following reason: RFC 4340 specifies
that if multiple options of the same type are present, they are processed in the
order of their appearance in the packet; which means that this order needs to be
preserved in the local data structure (the later insertion code also respects
this order).

The struct list_head has been chosen for the following reasons: the most 
frequent operations are
 * add new entry at tail (when receiving Change or setting socket options);
 * delete entry (when Confirm has been received);
 * deep copy of entire list (cloning from listening socket onto request socket).

The NN value has been set to 64 bit, which is a currently sufficient upper limit
(Sequence Window feature has 48 bit).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04 07:45:26 +02:00