[ Upstream commit e0be875c5bf03a9676a6bfed9e0f1766922a7dbd ]
The SOF topology loading function sets the device name for the platform
component link. This should be unset when unloading the topology,
otherwise a machine driver unbind/bind or reprobe would complain about
an invalid component as having both its component name and of_node set:
mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1
mt8186_mt6366 sound: error -EINVAL: Cannot register card
mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22
This happens with machine drivers that set the of_node separately.
Clear the SOF link platform name in the topology unload callback.
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a42db293e5983aa1508d12644f23d73f0553b32c ]
When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 576a0b71b5b479008dacb3047a346625040f5ac6 ]
In the existing IPC support, the reply to each IPC message is handled in
an IRQ thread. The assumption is that the IRQ thread is scheduled without
significant delays.
On an experimental (iow, buggy) kernel, the IRQ thread dealing with the
reply to the last IPC message before powering-down the DSP can be delayed
by several seconds. The IRQ thread will proceed with register accesses
after the DSP is powered-down which results in a kernel crash.
While the bug which causes the delay is not in the audio stack, we must
handle such cases with defensive programming to avoid such crashes.
Call synchronize_irq() before proceeding to power down the DSP to make
sure that no irq thread is pending execution.
Closes: https://github.com/thesofproject/linux/issues/4608
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191850.147140-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7354eb7f1558466e92e926802d36e69e42938ea9 ]
Default firmware shipped in open source are not licensed for 3P
libraries, therefore topologies should not reference them.
If a OS wants to use 3P (that they have licensed) then they should use
the appropriate topology override mechanisms.
Fixes: 8a7d5d85ed ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies")
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Wojciech Macek <wmacek@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240731212153.921327-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2038c12e8133bf4c6bd4d1127a23310d55d9e21 ]
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure, as per design clock source should be internal
clock.
Remove acp_clkmux_sel field so that ACP will use internal clock
source when ACP enters into D0 state.
Fixes: d0dab6b76a ("ASoC: SOF: amd: Add sof support for vangogh platform")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240718062004.581685-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2634f745eac25a33f032df32cf98fca8538a534a ]
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
fsl,dsp-ctrl is a phandle to syscon block so we need to use correct
function to retrieve it.
Currently there is no SOF DSP DTS merged into mainline so there is no
need to support the old way of retrieving the dsp control node.
Fixes: 9ba23717b2 ("ASoC: SOF: imx8m: Implement DSP start")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e6fc5fcaeffa04a3fa1db8dfccdfd4b6001c0446 upstream.
The DMA Link ID is set to the IPC message's primary during dai_config,
which is only during hw_params.
During xrun handling the hw_params is not called and the DMA Link ID
information will be lost.
All other fields in the message expected to be 0 for re-configuration, only
the DMA Link ID needs to be preserved and the in case of repeated
dai_config, it is correctly updated (masked and then set).
Cc: stable@vger.kernel.org
Fixes: ca5ce0caa6 ("ASoC: SOF: ipc4/intel: Add support for chained DMA")
Link: https://github.com/thesofproject/linux/issues/5116
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240724081932.24542-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 82bb8db96610b558920b8c57cd250ec90567d79b ]
The HDaudio specification Section 3.6.2 limits the number of BDL entries to 256.
Make sure we don't allow more periods than this normative value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704090106.371497-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f2a43e3d14f6e31a3b041a1043195d02c54d615 ]
If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9065693dcc13f287b9e4991f43aee70cf5538fdd ]
When system enters suspend with an active stream, SOF core
calls hw_params_upon_resume(). On Intel platforms with HDA DMA used
to manage the link DMA, this leads to call chain of
hda_dsp_set_hw_params_upon_resume()
-> hda_dsp_dais_suspend()
-> hda_dai_suspend()
-> hda_ipc4_post_trigger()
A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first,
which clears hext_stream->link_substream, and then hda_ipc4_post_trigger()
is called with a NULL snd_pcm_substream pointer.
Fixes: 2b009fa082 ("ASoC: SOF: Intel: hda: Unify DAI drv ops for IPC3 and IPC4")
Link: https://github.com/thesofproject/linux/issues/5080
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704085708.371414-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ffa077b2f6ad124ec3d23fbddc5e4b0ff2647af8 upstream.
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea1284 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b1c1c47e76f0161bda2b1ac2e86a219fe70244f ]
With the corrected rom_status_reg values we can now add a check for target
boot status for firmware booting.
With the check now we can identify failed firmware boots (IMR boots) and
we can use the fallback to purge boot the DSP.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26187f44aabdf3df7609b7c78724a059c230a2ad ]
In case of error during the firmware boot we need to disable the interrupts
which were enabled as part of the boot sequence.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5070d0c10326e09276c34568b9a19fb9a727b6e ]
Call snd_sof_dsp_dbg_dump() with the same flags/dump_msg
as used in function hda_loader.c/cl_dsp_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127105235.30071-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 26187f44aabd ("ASoC: SOF: Intel: mtl: Disable interrupts when firmware boot failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b852574c671a9983dd51c81582c8c5085f3dc382 ]
ACE2 architecture changed the place where the ROM updates the status code
from the shared SRAM window (and HFFLGP1QW0 in ACE1) to HFDSC register for
the status and HFDEC (HFDSC + 4) for the error code.
The rom_status_reg is not used on LNL because it was wrongly assigned based
on older platform convention (SRAM window) and it was giving inconsistent
readings.
Add new header file for lnl specific register definitions.
Fixes: 64a63d9914 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f1b820dc3c65b6883da3130ba3b8624dcbf87db ]
ACE1 architecture changed the place where the ROM updates the status code
from the shared SRAM window to HFFLGP1QW0 register for the status and
HFFLGP1QW0 + 4 for the error code.
The rom_status_reg is not used on MTL because it was wrongly assigned based
on older platform convention (SRAM window) and it was giving inconsistent
readings.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a00be6dc9bb80796244196033aa5eb258b6af47a ]
The initial copy/paste from MTL was incorrect, the hardware is
different and requires different descriptors along with a dedicated
firmware binary.
Fixes: 3851831f529e ("ASoC: SOF: Intel: pci-mtl: use ARL specific firmware definitions")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 1f1b820dc3c6 ("ASoC: SOF: Intel: mtl: Correct rom_status_reg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90a2353080eedec855d63f6aadfda14104ee9b06 ]
Introduce a new field in struct sof_ipc_pcm_ops that can be used to
restrict DSP D0i3 during S0ix suspend to IPC3. With IPC4, all streams
must be stopped before S0ix suspend.
Reviewed-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c61115b37ff964d63191dbf4a058f481daabdf57 ]
SoCs with ACE architecture are tailored to use s2idle instead deep (S3)
suspend state and the IMR content is lost when the system is forced to
enter even to S3.
When waking up from S3 state the IMR boot will fail as the content is lost.
Set the skip_imr_boot flag to make sure that we don't try IMR in this case.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240322112504.4192-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 305539a25a1c9929b058381aac6104bd939c0fee ]
The commit cd6f2a2e63 ("ASoC: SOF: Intel: Set the default firmware
library path for IPC4") added the default_lib_path field for all
platforms, but this was missed when LunarLake was later introduced.
Fixes: 64a63d9914 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a13f0c3c0e8fb3e61fbfd99c6b350cf9be0c4660 ]
Valve's Steam Deck OLED is uniquely identified by vendor and product
name (Galileo) DMI fields.
Simplify the quirk by removing the unnecessary match on product family.
Additionally, fix the related comment as it points to the old product
variant.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9846a386734e73a1414950ebfd50f04919f5e24 ]
Before ACP firmware loading, DSP interrupts are not expected.
Sometimes after reboot, it's observed that before ACP firmware is loaded
false DSP interrupt is reported.
Registering the interrupt handler before acp initialization causing false
interrupts sometimes on reboot as ACP reset is not applied.
Correct the sequence by invoking acp initialization sequence prior to
registering interrupt handler.
Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98f681b0f84cfc3a1d83287b77697679e0398306 ]
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.
Fixes: d2458baa79 ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 222be59e5eed1554119294edc743ee548c2371d0 ]
Driver uses kasprintf() to initialize fw_{code,data}_bin members of
struct acp_dev_data, but kfree() is never called to deallocate the
memory, which results in a memory leak.
Fix the issue by switching to devm_kasprintf(). Additionally, ensure the
allocation was successful by checking the pointer validity.
Fixes: f7da88003c ("ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platform")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c40aad7c81e5fba34b70123ed7ce3397fa62a4d2 ]
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fcbe4873089c84da641df75cda9cac2e9addbb4b upstream.
commit 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
introduced a new allocation before the upper bounds check in
do_rx_work. As a result A DSP can cause bad allocations if spewing
garbage.
Fixes: 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
Reported-by: Tim Van Patten <timvp@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123834.4827-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7332c4a4f1a7d16f054c6357fb65c597b6a86a7 ]
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8e5 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab09fb9c629ed3aaea6a82467f08595dbc549726 ]
Warnings related to missing data in firmware manifest have
proven to be too verbose. This relates to description of
DSP module cost expressed in cycles per chunk (CPC). If
a matching value is not found in the manifest, kernel will
pass a zero value and DSP firmware will use a conservative
value in its place.
Downgrade the warnings to dev_dbg().
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f03970198d6438d95b96f69041254bd39aafed0 ]
We use partial match for connecting DAI link and DAI widget. We need to
use partial match for disconnecting, too.
Fixes: fe88788779 ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c344ef36dbc2fe920ec7291b68b11fe867a2c8f6 upstream.
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e238b68e6dc89ddab52bd98216fe5623e94792b1 ]
Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c447636970e3409ac39f0bb8c2dcff6b726f36b0 ]
Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31ed8da1c8e5e504710bb36863700e3389f8fc81 ]
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0376b995bb7a65fb0c056f3adc5e9695ad0c1805 ]
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31e721fbd194d5723722eaa21df1d14cee7e12b5 ]
The function has multiple return points at which it is not released
previously allocated memory.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1c48fd6bbe788458e3685fea74bdb3cb148ff93 ]
Driver will receive exception IPC message and process it by
snd_sof_dsp_panic.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba2de401d32625fe538d3f2c00ca73740dd2d516 ]
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f549a82aff57865c47b5abd17336b23cd9bb2d2c ]
In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.
Check the result of cancel_work_sync to see if this was the case.
Fixes: 31bb7bd9ff ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3746284c233d5cf5f456400e61cd4a46a69c6e8c ]
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae9549 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7dd692217b861a8292ff8ac2c9d4458538fd6b96 upstream.
Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.
Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the fail paths during probe will free up the ops, on remove we should
only free it if the probe was successful.
Fixes: bc433fd76f ("ASoC: SOF: Add ops_free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230915124015.19637-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
20s seems unnecessarily large for the DSP init timeout. This coupled with
multiple FW boot attempts causes an excessive delay in the error path when
booting in recovery mode. Reduce it to 0.5s and use the existing
HDA_DSP_INIT_TIMEOUT_US.
Link: https://github.com/thesofproject/linux/issues/4565
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915134153.9688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case the widget setup fails we should only decrement the core usage
count if the sof_widget_free_unlocked() has not been called as part of
the error handling.
sof_widget_free_unlocked() calls snd_sof_dsp_core_put() and the additional
core_put will cause imbalance in core usage count.
Use the existing use_count_decremented to handle this issue.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230914124725.17397-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
available_fmt is a pointer.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230914132504.18463-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to scratch memory persistence, Once the DSP panic is reported, need to
clear the panic mask after handling DSP panic. Otherwise, It results in DSP
panic on next reboot.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Albert Jakieła