Commit Graph

9 Commits

Author SHA1 Message Date
Marco Elver b738f6169f kcsan: Introduce kcsan_value_change type
Introduces kcsan_value_change type, which explicitly points out if we
either observed a value-change (TRUE), or we could not observe one but
cannot rule out a value-change happened (MAYBE). The MAYBE state can
either be reported or not, depending on configuration preferences.

A follow-up patch introduces the FALSE state, which should never be
reported.

No functional change intended.

Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:44:03 +01:00
Marco Elver 3a5b45e503 kcsan: Fix misreporting if concurrent races on same address
If there are at least 4 threads racing on the same address, it can
happen that one of the readers may observe another matching reader in
other_info. To avoid locking up, we have to consume 'other_info'
regardless, but skip the report. See the added comment for more details.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:43:41 +01:00
Marco Elver d591ec3db7 kcsan: Introduce KCSAN_ACCESS_ASSERT access type
The KCSAN_ACCESS_ASSERT access type may be used to introduce dummy reads
and writes to assert certain properties of concurrent code, where bugs
could not be detected as normal data races.

For example, a variable that is only meant to be written by a single
CPU, but may be read (without locking) by other CPUs must still be
marked properly to avoid data races. However, concurrent writes,
regardless if WRITE_ONCE() or not, would be a bug. Using
kcsan_check_access(&x, sizeof(x), KCSAN_ACCESS_ASSERT) would allow
catching such bugs.

To support KCSAN_ACCESS_ASSERT the following notable changes were made:

  * If an access is of type KCSAN_ASSERT_ACCESS, disable various filters
    that only apply to data races, so that all races that KCSAN observes are
    reported.
  * Bug reports that involve an ASSERT access type will be reported as
    "KCSAN: assert: race in ..." instead of "data-race"; this will help
    more easily distinguish them.
  * Update a few comments to just mention 'races' where we do not always
    mean pure data races.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:42:50 +01:00
Marco Elver ad4f8eeca8 kcsan: Address missing case with KCSAN_REPORT_VALUE_CHANGE_ONLY
Even with KCSAN_REPORT_VALUE_CHANGE_ONLY, KCSAN still reports data
races between reads and watchpointed writes, even if the writes wrote
values already present.  This commit causes KCSAN to unconditionally
skip reporting in this case.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:41:29 +01:00
Marco Elver f1bc96210c kcsan: Make KCSAN compatible with lockdep
We must avoid any recursion into lockdep if KCSAN is enabled on utilities
used by lockdep. One manifestation of this is corruption of lockdep's
IRQ trace state (if TRACE_IRQFLAGS), resulting in spurious warnings
(see below).  This commit fixes this by:

1. Using raw_local_irq{save,restore} in kcsan_setup_watchpoint().
2. Disabling lockdep in kcsan_report().

Tested with:

  CONFIG_LOCKDEP=y
  CONFIG_DEBUG_LOCKDEP=y
  CONFIG_TRACE_IRQFLAGS=y

This fix eliminates spurious warnings such as the following one:

    WARNING: CPU: 0 PID: 2 at kernel/locking/lockdep.c:4406 check_flags.part.0+0x101/0x220
    Modules linked in:
    CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.5.0-rc1+ #11
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
    RIP: 0010:check_flags.part.0+0x101/0x220
    <snip>
    Call Trace:
     lock_is_held_type+0x69/0x150
     freezer_fork+0x20b/0x370
     cgroup_post_fork+0x2c9/0x5c0
     copy_process+0x2675/0x3b40
     _do_fork+0xbe/0xa30
     ? _raw_spin_unlock_irqrestore+0x40/0x50
     ? match_held_lock+0x56/0x250
     ? kthread_park+0xf0/0xf0
     kernel_thread+0xa6/0xd0
     ? kthread_park+0xf0/0xf0
     kthreadd+0x321/0x3d0
     ? kthread_create_on_cpu+0x130/0x130
     ret_from_fork+0x3a/0x50
    irq event stamp: 64
    hardirqs last  enabled at (63): [<ffffffff9a7995d0>] _raw_spin_unlock_irqrestore+0x40/0x50
    hardirqs last disabled at (64): [<ffffffff992a96d2>] kcsan_setup_watchpoint+0x92/0x460
    softirqs last  enabled at (32): [<ffffffff990489b8>] fpu__copy+0xe8/0x470
    softirqs last disabled at (30): [<ffffffff99048939>] fpu__copy+0x69/0x470

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:41:16 +01:00
Marco Elver 05f9a40679 kcsan: Rate-limit reporting per data races
KCSAN data-race reports can occur quite frequently, so much so as
to render the system useless.  This commit therefore adds support for
time-based rate-limiting KCSAN reports, with the time interval specified
by a new KCSAN_REPORT_ONCE_IN_MS Kconfig option.  The default is 3000
milliseconds, also known as three seconds.

Because KCSAN must detect data races in allocators and in other contexts
where use of allocation is ill-advised, a fixed-size array is used to
buffer reports during each reporting interval.  To reduce the number of
reports lost due to array overflow, this commit stores only one instance
of duplicate reports, which has the benefit of further reducing KCSAN's
console output rate.

Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:40:52 +01:00
Marco Elver 47144eca28 kcsan: Show full access type in report
This commit adds access-type information to KCSAN's reports as follows:
"read", "read (marked)", "write", and "write (marked)".

Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21 09:40:42 +01:00
Ingo Molnar 5cbaefe974 kcsan: Improve various small stylistic details
Tidy up a few bits:

  - Fix typos and grammar, improve wording.

  - Remove spurious newlines that are col80 warning artifacts where the
    resulting line-break is worse than the disease it's curing.

  - Use core kernel coding style to improve readability and reduce
    spurious code pattern variations.

  - Use better vertical alignment for structure definitions and initialization
    sequences.

  - Misc other small details.

No change in functionality intended.

Cc: linux-kernel@vger.kernel.org
Cc: Marco Elver <elver@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-20 10:47:23 +01:00
Marco Elver dfd402a4c4 kcsan: Add Kernel Concurrency Sanitizer infrastructure
Kernel Concurrency Sanitizer (KCSAN) is a dynamic data-race detector for
kernel space. KCSAN is a sampling watchpoint-based data-race detector.
See the included Documentation/dev-tools/kcsan.rst for more details.

This patch adds basic infrastructure, but does not yet enable KCSAN for
any architecture.

Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-11-16 07:23:13 -08:00