Fix up various whitespace issues as reported by checkpatch.pl:
* remove spaces around operators where appropriate,
* add missing blank lines following declarations,
* remove multiple blank lines, or trailing blank lines at the end of
functions.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently devlink instance is searched on all doit() operations.
But it is optionally stored into user_ptr[0]. This requires
rediscovering devlink again doing post_doit().
Few devlink commands related to port shared buffers needs 3 pointers
(devlink, devlink_port, and devlink_sb) while executing doit commands.
Though devlink pointer can be derived from the devlink_port during
post_doit() operation when doit() callback has acquired devlink
instance lock, relying on such scheme to access devlik pointer makes
code very fragile.
Hence, to avoid ambiguity in post_doit() and to avoid searching
devlink instance again, simplify code by always storing devlink
instance in user_ptr[0] and derive devlink_sb pointer in their
respective callback routines.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlan tagged packets are getting dropped when used with DPDK that uses
the AF_PACKET interface on a hyperV guest.
The packet layer uses the tpacket interface to communicate the vlans
information to the upper layers. On Rx path, these drivers can read the
vlan info from the tpacket header but on the Tx path, this information
is still within the packet frame and requires the paravirtual drivers to
push this back into the NDIS header which is then used by the host OS to
form the packet.
This transition from the packet frame to NDIS header is currently missing
hence causing the host OS to drop the all vlan tagged packets sent by
the drivers that use AF_PACKET (ETH_P_ALL) such as DPDK.
Here is an overview of the changes in the vlan header in the packet path:
The RX path (userspace handles everything):
1. RX VLAN packet is stripped by HOST OS and placed in NDIS header
2. Guest Kernel RX hv_netvsc packets and moves VLAN info from NDIS
header into kernel SKB
3. Kernel shares packets with user space application with PACKET_MMAP.
The SKB VLAN info is copied to tpacket layer and indication set
TP_STATUS_VLAN_VALID.
4. The user space application will re-insert the VLAN info into the frame
The TX path:
1. The user space application has the VLAN info in the frame.
2. Guest kernel gets packets from the application with PACKET_MMAP.
3. The kernel later sends the frame to the hv_netvsc driver. The only way
to send VLANs is when the SKB is setup & the VLAN is stripped from the
frame.
4. TX VLAN is re-inserted by HOST OS based on the NDIS header. If it sees
a VLAN in the frame the packet is dropped.
Cc: xe-linux-external@cisco.com
Cc: Sriram Krishnan <srirakr2@cisco.com>
Signed-off-by: Sriram Krishnan <srirakr2@cisco.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise the 'chain_len' filed will carry random values,
some token creation calls will fail due to excessive chain
length, causing unexpected fallback to TCP.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable current_head_index is being initialized with a value that
is never read and it is being updated later with a new value. Replace
the initialization of -1 with the latter assignment.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
enetc_imdio_remove() is missing from the enetc_pf_probe()
bailout path. Not surprisingly because enetc_setup_serdes()
is registering the imdio bus for internal purposes, and it's
not obvious that enetc_imdio_remove() currently performs the
teardown of enetc_setup_serdes().
To fix this, define enetc_teardown_serdes() to wrap
enetc_imdio_remove() (improve code maintenance) and call it
on bailout and remove paths.
Fixes: 975d183ef0 ("net: enetc: Initialize SerDes for SGMII and USXGMII protocols")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove casting the values returned by memory allocation function.
Coccinelle emits WARNING: casting value returned by memory allocation
unction to (struct roce_destroy_qp_req_output_params *) is useless.
This issue was detected by using the Coccinelle software.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the patch below, the iteration through the available MMDs is
completely short-circuited, and devs_in_pkg remains set to the initial
value of zero.
Due to devs_in_pkg being zero, the rest of get_phy_c45_ids() is
short-circuited too: the following loop never reaches below this point
either (it executes "continue" for every device in package, failing to
retrieve PHY ID for any of them):
/* Now probe Device Identifiers for each device present. */
for (i = 1; i < num_ids; i++) {
if (!(devs_in_pkg & (1 << i)))
continue;
So c45_ids->device_ids remains populated with zeroes. This causes an
Aquantia AQR412 PHY (same as any C45 PHY would, in fact) to be probed by
the Generic PHY driver.
The issue seems to be a case of submitting partially committed work (and
therefore testing something other than was submitted).
The intention of the patch was to delay exiting the loop until one more
condition is reached (the devs_in_pkg read from hardware is either 0, OR
mostly f's). So fix the patch to reflect that.
Tested with traffic on a LS1028A-QDS, the PHY is now probed correctly
using the Aquantia driver. The devs_in_pkg bit field is set to
0xe000009a, and the MMDs that are present have the following IDs:
[ 5.600772] libphy: get_phy_c45_ids: device_ids[1]=0x3a1b662
[ 5.618781] libphy: get_phy_c45_ids: device_ids[3]=0x3a1b662
[ 5.630797] libphy: get_phy_c45_ids: device_ids[4]=0x3a1b662
[ 5.654535] libphy: get_phy_c45_ids: device_ids[7]=0x3a1b662
[ 5.791723] libphy: get_phy_c45_ids: device_ids[29]=0x3a1b662
[ 5.804050] libphy: get_phy_c45_ids: device_ids[30]=0x3a1b662
[ 5.816375] libphy: get_phy_c45_ids: device_ids[31]=0x0
[ 7.690237] mscc_felix 0000:00:00.5: PHY [0.5:00] driver [Aquantia AQR412] (irq=POLL)
[ 7.704739] mscc_felix 0000:00:00.5: PHY [0.5:01] driver [Aquantia AQR412] (irq=POLL)
[ 7.718918] mscc_felix 0000:00:00.5: PHY [0.5:02] driver [Aquantia AQR412] (irq=POLL)
[ 7.733044] mscc_felix 0000:00:00.5: PHY [0.5:03] driver [Aquantia AQR412] (irq=POLL)
Fixes: bba238ed03 ("net: phy: continue searching for C45 MMDs even if first returned ffff:ffff")
Reported-by: Colin King <colin.king@canonical.com>
Reported-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the SIOCOUTQ IOCTL to get the send buffer fill
of a DCCP socket, like UDP and TCP sockets already have.
Regarding the used data field: DCCP uses per packet sequence numbers,
not per byte, so sequence numbers can't be used like in TCP. sk_wmem_queued
is not used by DCCP and always 0, even in test on highly congested paths.
Therefore this uses sk_wmem_alloc like in UDP.
Signed-off-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach says:
====================
Add DSA yaml binding
as discussed [1] [2] it makes sense to add a DSA yaml binding. This is the
second version and contains now two ways of specifying the switch ports: Either
by "ports" or by "ethernet-ports". That is why the third patch also adjusts the
DSA core for it.
Tested in combination with the hellcreek.yaml file.
Changes since v1:
* Use select to not match unrelated switches
* Allow ethernet-port(s)
* List ethernet-controller properties
* Include better description
* Let dsa.txt refer to dsa.yaml
Thanks,
Kurt
[1] - https://lkml.kernel.org/netdev/449f0a03-a91d-ae82-b31f-59dfd1457ec5@gmail.com/
[2] - https://lkml.kernel.org/netdev/20200710090618.28945-1-kurt@linutronix.de/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as
encapsulating node as well.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA bindings have been converted to YAML. Therefore, the old text style
documentation should refer to that one.
The text file can be removed completely once all the existing DSA switch
bindings have been converted as well.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
For future DSA drivers it makes sense to add a generic DSA yaml binding which
can be used then. This was created using the properties from dsa.txt. It
includes the ports and the dsa,member property.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VSC7514 is marketed as a 10-port switch, however it has 11 physical
ports (0->10) in the block diagram:
https://www.microsemi.com/product-directory/ethernet-switches/3992-vsc7514
(also in the device tree at arch/mips/boot/dts/mscc/ocelot.dtsi)
Additionally, by architecture it has one more entry in the analyzer
block, situated right after the physical ports, for the CPU port module.
This is not a physical port, it only represents a channel for frame
injection and extraction. That entry for the CPU port is at index 11 in
the analyzer.
When the register groups for QSYS_SWITCH_PORT_MODE, SYS_PORT_MODE and
SYS_PAUSE_CFG are declared to be replicated 11 times, the 11th entry in
the array of regfields is not initialized, so the CPU port module is not
initialized either.
The documentation of QSYS_SWITCH_PORT_MODE for VSC7514 also says that
this register group is replicated 12 times, so this patch is simply
reflecting that and not introducing any further inconsistency.
Fixes: 886e1387c7 ("net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields")
Fixes: 541132f096 ("net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield")
Reported-by: Bryan Whitehead <bryan.whitehead@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The buildbot found a config where the header isn't already implicitly
pulled in, so add an explicit include as well.
Fixes: 8c918ffbba ("net: remove compat_sock_common_{get,set}sockopt")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic updates
These are a few odd code tweaks to the ionic driver: FW defined MTU
limits, remove unnecessary code, and other tidiness tweaks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some new interface values and update a few more descriptions.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can prevent potential incorrect DMA access attempts from the
NIC by enabling bus-master after the reset, and by disabling
bus-master earlier in cleanup.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up our comparison to better handle a potential (but largely
unlikely) wrap around.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the host system's udev fails to set a new name for the
network port, there is no NETDEV_CHANGENAME event to trigger
the driver to send the name down to the firmware. It is safe
to set the lif name multiple times, so we add a call early on
to set the default netdev name to be sure the FW has something
to use in its internal debug logging. Then when udev gets
around to changing it we can update it to the actual name the
system will be using.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change from using hardcoded MTU limits and instead use the
firmware defined limits. The value from the LIF attributes is
the frame size, so we take off the header size to convert to
MTU size.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit fe80536acf ("bareudp: Added attribute to enable & disable
rx metadata collection") breaks the the original(5.7) default behavior of
bareudp module to collect RX metadadata at the receive. It was added to
avoid the crash at the kernel neighbour subsytem when packet with metadata
from bareudp is processed. But it is no more needed as the
commit 394de110a7 ("net: Added pointer check for
dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash.
Fixes: fe80536acf ("bareudp: Added attribute to enable & disable rx metadata collection")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-eth: add support for TBF offload
This patch set adds support for TBF offload in dpaa2-eth.
The first patch restructures how the .ndo_setup_tc() callback is
implemented (each Qdisc is treated in a separate function), the second
patch just adds the necessary APIs for configuring the Tx shaper and the
last one is handling TC_SETUP_QDISC_TBF and configures as requested the
shaper.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
React to TC_SETUP_QDISC_TBF and configure the egress shaper as
appropriate with the maximum rate and burst size requested by the user.
TBF can only be offloaded on DPAA2 when it's the root qdisc, ie it's a
per port shaper.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the necessary API (dpni_set_tx_shaping) for configuring the rate and
burst size of a per port shaper in DPAA2.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the setup done for MQPRIO into a separate function so that
with the addition of another offload we do not crowd
dpaa2_eth_setup_tc(). After this restructuring it's easier to see what
is supported in terms of Qdisc offloading.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit says:
====================
devlink small improvements
This short series improves the devlink code for lock commment,
simplifying checks and keeping the scope of mutex lock for necessary
fields.
Patch summary:
Patch-1 Keep the devlink_mutex for only for necessary changes.
Patch-2 Avoids duplicate check for reload flag
Patch-3 Adds missing comment for the scope of devlink instance lock
Patch-4 Constify devlink instance pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Constify devlink instance pointer while checking if reload operation is
supported or not.
This helps to review the scope of checks done in reload.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add comment to describe the purpose of devlink instance lock.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reload operation is enabled or not is already checked by
devlink_reload(). Hence, remove the duplicate check from
devlink_nl_cmd_reload().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to hold a device global lock when initializing
devlink device fields of a devlink instance which is not yet part of the
devices list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For most chip versions this has been added already. Allow also for
RTL8125A to enable ASPM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski says:
====================
ENA driver new features
V4 changes:
-----------
Add smp_rmb() to "net: ena: avoid unnecessary rearming of interrupt
vector when busy-polling" to adhere to the linux kernel memory model,
and update the commit message accordingly.
V3 changes:
-----------
1. Add "net: ena: enable support of rss hash key and function
changes" patch again, with more explanations why it should
be in net-next in commit message.
2. Add synchronization considerations to "net: ena: avoid unnecessary
rearming of interrupt vector when busy-polling"
V2 changes:
-----------
1. Update commit messages of 2 patches to be more verbose.
2. Remove "net: ena: enable support of rss hash key and function
changes" patch. Will be resubmitted net.
V1 cover letter:
----------------
This patchset contains performance improvements, support for new devices
and functionality:
1. Support for upcoming ENA devices
2. Avoid unnecessary IRQ unmasking in busy poll to reduce interrupt rate
3. Enabling device support for RSS function and key manipulation
4. Support for NIC-based traffic mirroring (SPAN port)
5. Additional PCI device ID
6. Cosmetic changes
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New devices add a new hardware acceleration engine, which adds some
restrictions to the driver.
Metadata descriptor must be present for each packet and the maximum
burst size between two doorbells is now limited to a number
advertised by the device.
This patch adds:
1. A handshake protocol between the driver and the device, so the
device will enable the accelerated queues only when both sides
support it.
2. The driver support for the new acceleration engine:
2.1. Send metadata descriptor for each Tx packet.
2.2. Limit the number of packets sent between doorbells.(*)
(*) A previous driver implementation of this feature was comitted in
commit 05d62ca218 ("net: ena: add handling of llq max tx burst size")
however the design of the interface between the driver and device
changed since then. This change is reflected in this commit.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ENA device resets to recover from some error state, all LLQ
configuration values are reset to their defaults, because LLQ is
initialized only once during ena_probe().
Changes in this commit:
1. Move the LLQ configuration process into ena_init_device()
which is called from both ena_probe() and ena_restore_device(). This
way, LLQ setup configurations that are different from the default
values will survive resets.
2. Extract the LLQ bar mapping to ena_map_llq_bar(),
and call once in the lifetime of the driver from ena_probe(),
since there is no need to unmap and map the LLQ bar again every reset.
3. Map the LLQ bar if it exists, regardless if initialization of LLQ
placement policy (ENA_ADMIN_PLACEMENT_POLICY_DEV) succeeded
or not. Initialization might fail the first time, falling back to the
ENA_ADMIN_PLACEMENT_POLICY_HOST placement policy, but later succeed
after device reset, in which case the LLQ bar needs to be mapped
already.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the rss_configurable_function_key bit to driver_supported_feature.
This bit tells the device that the driver in question supports the
retrieving and updating of RSS function and hash key, and therefore
the device should allow RSS function and key manipulation.
This commit turns on device support for hash key and RSS function
management. Without this commit this feature is turned off at the
device and appears to the user as unsupported.
This commit concludes the following series of already merged commits:
commit 0af3c4e2ea ("net: ena: changes to RSS hash key allocation")
commit c1bd17e51c ("net: ena: change default RSS hash function to Toeplitz")
commit f66c2ea3b1 ("net: ena: allow setting the hash function without changing the key")
commit e9a1de378d ("net: ena: fix error returning in ena_com_get_hash_function()")
commit 80f8443fcd ("net: ena: avoid unnecessary admin command when RSS function set fails")
commit 6a4f7dc82d ("net: ena: rss: do not allocate key when not supported")
commit 0d1c3de7b8 ("net: ena: fix incorrect default RSS key")
The above commits represent the last part of the implementation of
this feature, and with them merged the feature can be enabled
in the device.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for traffic mirroring, where the hardware reads the
buffer from the instance memory directly.
Traffic Mirroring needs access to the rx buffers in the instance.
To have this access, this patch:
1. Changes the code to map and unmap the rx buffers bidirectionally.
2. Enables the relevant bit in driver_supported_features to indicate
to the FW that this driver supports traffic mirroring.
Rx completion is not generated until mirroring is done to avoid
the situation where the driver changes the buffer before it is
mirrored.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The size of the admin statistics in ena_com_stats_admin is changed
from 32bit to 64bit so to align with the sizes of the other statistics
in the driver (i.e. rx_stats, tx_stats and ena_stats_dev).
This is done as part of an effort to create a unified API to read
statistics.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc 4.8 reports a warning when initializing with = {0}.
Dropping the "0" from the braces fixes the issue.
This fix is not ANSI compatible but is allowed by gcc.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a reserved PCI device ID to the driver's table
Used for internal testing purposes.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For an overview of the race created by this patch goto synchronization
label.
In napi busy-poll mode, the kernel invokes the napi handler of the
device repeatedly to poll the NIC's receive queues. This process
repeats until a timeout, specific for each connection, is up.
By polling packets in busy-poll mode the user may gain lower latency
and higher throughput (since the kernel no longer waits for interrupts
to poll the queues) in expense of CPU usage.
Upon completing a napi routine, the driver checks whether
the routine was called by an interrupt handler. If so, the driver
re-enables interrupts for the device. This is needed since an
interrupt routine invocation disables future invocations until
explicitly re-enabled.
The driver avoids re-enabling the interrupts if they were not disabled
in the first place (e.g. if driver in busy mode).
Originally, the driver checked whether interrupt re-enabling is needed
by reading the 'ena_napi->unmask_interrupt' variable. This atomic
variable was set upon interrupt and cleared after re-enabling it.
In the 4.10 Linux version, the 'napi_complete_done' call was changed
so that it returns 'false' when device should not re-enable
interrupts, and 'true' otherwise. The change includes reading the
"NAPIF_STATE_IN_BUSY_POLL" flag to check if the napi call is in
busy-poll mode, and if so, return 'false'.
The driver was changed to re-enable interrupts according to this
routine's return value.
The Linux community rejected the use of the
'ena_napi->unmaunmask_interrupt' variable to determine whether
unmasking is needed, and urged to use napi_napi_complete_done()
return value solely.
See https://lore.kernel.org/patchwork/patch/741149/ for more details
As explained, a busy-poll session exists for a specified timeout
value, after which it exits the busy-poll mode and re-enters it later.
This leads to many invocations of the napi handler where
napi_complete_done() false indicates that interrupts should be
re-enabled.
This creates a bug in which the interrupts are re-enabled
unnecessarily.
To reproduce this bug:
1) echo 50 | sudo tee /proc/sys/net/core/busy_poll
2) echo 50 | sudo tee /proc/sys/net/core/busy_read
3) Add counters that check whether
'ena_unmask_interrupt(tx_ring, rx_ring);'
is called without disabling the interrupts in the first
place (i.e. with calling the interrupt routine
ena_intr_msix_io())
Steps 1+2 enable busy-poll as the default mode for new connections.
The busy poll routine rearms the interrupts after every session by
design, and so we need to add an extra check that the interrupts were
masked in the first place.
synchronization:
This patch introduces a race between the interrupt handler
ena_intr_msix_io() and the napi routine ena_io_poll().
Some macros and instruction were added to prevent this race from leaving
the interrupts masked. The following specifies the different race
scenarios in this patch:
1) interrupt handler and napi routine run sequentially
i) interrupt handler is called, sets 'interrupts_masked' flag and
successfully schedules the napi handler via softirq.
In this scenario the napi routine might not see the flag change
for several reasons:
a) The flag is stored in a register by the compiler. For this
case the WRITE_ONCE macro which prevents this.
b) The compiler might reorder the instruction. For this the
smp_wmb() instruction was used which implies a compiler memory
barrier.
c) On archs with weak consistency model (like ARM64) the napi
routine might be scheduled and start running before the flag
STORE instruction is committed to cache/memory. To ensure this
doesn't happen, the smp_wmb() instruction was added. It ensures
that the flag set instruction is committed before scheduling
napi.
ii) compiler reorders the flag's value check in the 'if' with
the flag set in the napi routine.
This scenario is prevented by smp_rmb() call after the flag check.
2) interrupt handler and napi routine run in parallel (can happen when
busy poll routine invokes the napi handler)
i) interrupt handler sets the flag in one core, while the napi
routine reads it in another core.
This scenario also is divided into two cases:
a) napi_complete_done() doesn't finish running, in which case
napi_sched() would just set NAPIF_STATE_MISSED and the napi
routine would reschedule itself without changing the flag's value.
b) napi_complete_done() finishes running. In this case the
napi routine might override the flag's value.
This doesn't present any rise since it later unmasks the
interrupt vector.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Free ILT lines used for XRC-SRQ's contexts.
- Free XRCD bitmap
Fixes: b8204ad878 ("qed: changes to ILT to support XRC")
Fixes: 7bfb399eca ("qed: Add XRC to RoCE")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
Phylink PCS updates
This series updates the rudimentary phylink PCS support with the
results of the last four months of development of that. Phylink
PCS support was initially added back at the end of March, when it
became clear that the current approach of treating everything at
the MAC end as being part of the MAC was inadequate.
However, this rudimentary implementation was fine initially for
mvneta and similar, but in practice had a fair number of issues,
particularly when ethtool interfaces were used to change various
link properties.
It became apparent that relying on the phylink_config structure for
the PCS was also bad when it became clear that the same PCS was used
in DSA drivers as well as in NXPs other offerings, and there was a
desire to re-use that code.
It also became apparent that splitting the "configuration" step on
an interface mode configuration between the MAC and PCS using just
mac_config() and pcs_config() methods was not sufficient for some
setups, as the MAC needed to be "taken down" prior to making changes,
and once all settings were complete, the MAC could only then be
resumed.
This series addresses these points, progressing PCS support, and
has been developed with mvneta and DPAA2 setups, with work on both
those drivers to prove this approach. It has been rigorously tested
with mvneta, as that provides the most flexibility for testing the
various code paths.
To solve the phylink_config reuse problem, we introduce a struct
phylink_pcs, which contains the minimal information necessary, and it
is intended that this is embedded in the PCS private data structure.
To solve the interface mode configuration problem, we introduce two
new MAC methods, mac_prepare() and mac_finish() which wrap the entire
interface mode configuration only. This has the additional benefit of
relieving MAC drivers from working out whether an interface change has
occurred, and whether they need to do some major work.
I have not yet updated all the interface documentation for these
changes yet, that work remains, but this patch set is provided in the
hope that those working on PCS support in NXP will find this useful.
Since there is a lot of change here, this is the reason why I strongly
advise that everyone has converted to the mac_link_up() way of
configuring the link parameters when the link comes up, rather than
the old way of using mac_config() - especially as splitting the PCS
changes how and when phylink calls mac_config(). Although no change
for existing users is intended, that is something I no longer am able
to test.
Changes since RFC:
- fix bisect build failure
- add patch to use config.an_enabled
- rename phylink_config_interface to phylink_major_reconfig
- add expanded documentation for phylink_set_pcs()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface to configure the advertisement for a clause 22 PCS
PHY, and set the AN enable flag in the BMCR appropriately.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a way for MAC PCS to have private data while keeping independence
from struct phylink_config, which is used for the MAC itself. We need
this independence as we will have stand-alone code for PCS that is
independent of the MAC. Introduce struct phylink_pcs, which is
designed to be embedded in a driver private data structure.
This structure does not include a mdio_device as there are PCS
implementations such as the Marvell DSA and network drivers where this
is not necessary.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
With PCS support, how we implement interface reconfiguration (or other
major reconfiguration) is not up to the job; we end up reconfiguring
the PCS for an interface change while the link could potentially be up.
In order to solve this, add two additional MAC methods for major
configuration, one to prepare for the change, and one to finish the
change.
This allows mvneta and mvpp2 to shutdown what they require prior to the
MAC and PCS configuration calls, and then restart as appropriate.
This impacts ksettings_set(), which now needs to identify whether the
change is a minor tweak to the advertisement masks or whether the
interface mode has changed, and call the appropriate function for that
update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-code the pause in-band advertisement update in light of the addition
of PCS support, so that we perform the minimum required; only the PCS
configuration function needs to be called in this case, followed by the
request to trigger a restart of negotiation if the programmed
advertisement changed.
We need to change the pcs_config() signature to pass whether resolved
pause should be passed to the MAC for setups such as mvneta and mvpp2
where doing so overrides the MAC manual flow controls.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin