Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to
be handled differently whether initiated by idle, user or guest. Prepare
with pulling that control up to rcu_eqs_enter() callers.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-2-frederic@kernel.org
The debug-object double-free checks in __call_rcu() print out the
RCU callback function, which is usually sufficient to track down the
double free. However, all uses of things like queue_rcu_work() will
have the same RCU callback function (rcu_work_rcufn() in this case),
so a diagnostic message for a double queue_rcu_work() needs more than
just the callback function.
This commit therefore calls mem_dump_obj() to dump out any additional
available information on the double-freed callback.
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The TREE01 rcutorture scenario intentionally creates confusion as to the
number of available CPUs by specifying the "maxcpus=8 nr_cpus=43" kernel
boot parameters. This can disable rcutorture's load shedding, which
currently uses num_online_cpus(), which would count the extra 35 CPUs.
However, the rcutorture guest OS will be provisioned with only 8 CPUs,
which means that rcutorture will present full load even when all but one
of the original 8 CPUs are offline. This can result in spurious errors
due to extreme overloading of that single remaining CPU.
This commit therefore keeps a separate set of books on the number of
usable online CPUs, so that torture_num_online_cpus() is used for load
shedding instead of num_online_cpus(). Note that initial sizing must
use num_online_cpus() because torture_num_online_cpus() will return
NR_CPUS until shortly after torture_onoff_init() is invoked.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit provides a test for call_rcu() printing the allocation address
of a double-freed callback by double-freeing a callback allocated via
kmalloc(). However, this commit does not depend on any other commit.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a short delay for verbose_batched-throttled printk()s
to further decrease console flooding.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit replaces schedule_timeout_uninterruptible() and
schedule_timeout_interruptible() with torture_hrtimeout_us() and
torture_hrtimeout_jiffies() to avoid timer-wheel synchronization.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because rcu_torture_writer() and rcu_torture_fakewriter() predate
hrtimers, they do timer-wheel-decoupled timed waits by using the
timer-wheel-based schedule_timeout_interruptible() functions in
conjunction with a random udelay()-based wait. This latter unnecessarily
burns CPU time, so this commit instead uses torture_hrtimeout_jiffies()
to decouple from the timer wheels without busy-waiting.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Full testing of the new SRCU polling API requires that the fake
writers also use it in order to test concurrent calls to all of the API
members, especially start_poll_synchronize_srcu(). This commit makes
rcu_torture_fakewriter() use all available blocking grace-period-wait
primitives available from the RCU flavor under test.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Full testing of the new SRCU polling API requires that the fake writers
also use it in order to test concurrent calls to all of the API members,
especially start_poll_synchronize_srcu(). This commit prepares the ground
for this by making the synctype[] and nsynctype variables be static
globals so that the rcu_torture_fakewriter() function can access them.
Initialization of these variables is moved from rcu_torture_writer()
to a new rcu_torture_write_types() function that is invoked from
rcu_torture_init() just before the first writer kthread is spawned.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the rcu_torture_writer() function checks that all required
grace periods elapse during a stutter interval, which is a multi-second
time period during which the test load is removed. However, this check
is suppressed during early boot (that is, before init is spawned) in
order to avoid false positives that otherwise occur due to heavy load
on the single boot CPU.
Unfortunately, this approach is insufficient. It is possible that the
stutter interval might end just as init is spawned, so that early boot
conditions prevailed during almost the entire stutter interval.
This commit therefore takes a snapshot of boot-complete state just
before the stutter interval, thus suppressing the check for failure to
complete grace periods unless the entire stutter interval took place
after early boot.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The refscale test prints enough per-kthread console output to provoke RCU
CPU stall warnings on large systems. This commit therefore allows this
output to be summarized. For example, the refscale.verbose_batched=32
boot parameter would causes only every 32nd line of output to be logged.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For a new grace period request, the RCU GP kthread transitions through
following states:
a. [RCU_GP_WAIT_GPS] -> [RCU_GP_DONE_GPS]
The RCU_GP_WAIT_GPS state is where the GP kthread waits for a request
for a new GP. Once it receives a request (for example, when a new RCU
callback is queued), the GP kthread transitions to RCU_GP_DONE_GPS.
b. [RCU_GP_DONE_GPS] -> [RCU_GP_ONOFF]
Grace period initialization starts in rcu_gp_init(), which records the
start of new GP in rcu_state.gp_seq and transitions to RCU_GP_ONOFF.
c. [RCU_GP_ONOFF] -> [RCU_GP_INIT]
The purpose of the RCU_GP_ONOFF state is to apply the online/offline
information that was buffered for any CPUs that recently came online or
went offline. This state is maintained in per-leaf rcu_node bitmasks,
with the buffered state in ->qsmaskinitnext and the state for the upcoming
GP in ->qsmaskinit. At the end of this RCU_GP_ONOFF state, each bit in
->qsmaskinit will correspond to a CPU that must pass through a quiescent
state before the upcoming grace period is allowed to complete.
However, a leaf rcu_node structure with an all-zeroes ->qsmaskinit
cannot necessarily be ignored. In preemptible RCU, there might well be
tasks still in RCU read-side critical sections that were first preempted
while running on one of the CPUs managed by this structure. Such tasks
will be queued on this structure's ->blkd_tasks list. Only after this
list fully drains can this leaf rcu_node structure be ignored, and even
then only if none of its CPUs have come back online in the meantime.
Once that happens, the ->qsmaskinit masks further up the tree will be
updated to exclude this leaf rcu_node structure.
Once the ->qsmaskinitnext and ->qsmaskinit fields have been updated
as needed, the GP kthread transitions to RCU_GP_INIT.
d. [RCU_GP_INIT] -> [RCU_GP_WAIT_FQS]
The purpose of the RCU_GP_INIT state is to copy each ->qsmaskinit to
the ->qsmask field within each rcu_node structure. This copying is done
breadth-first from the root to the leaves. Why not just copy directly
from ->qsmaskinitnext to ->qsmask? Because the ->qsmaskinitnext masks
can change in the meantime as additional CPUs come online or go offline.
Such changes would result in inconsistencies in the ->qsmask fields up and
down the tree, which could in turn result in too-short grace periods or
grace-period hangs. These issues are avoided by snapshotting the leaf
rcu_node structures' ->qsmaskinitnext fields into their ->qsmaskinit
counterparts, generating a consistent set of ->qsmaskinit fields
throughout the tree, and only then copying these consistent ->qsmaskinit
fields to their ->qsmask counterparts.
Once this initialization step is complete, the GP kthread transitions
to RCU_GP_WAIT_FQS, where it waits to do a force-quiescent-state scan
on the one hand or for the end of the grace period on the other.
e. [RCU_GP_WAIT_FQS] -> [RCU_GP_DOING_FQS]
The RCU_GP_WAIT_FQS state waits for one of three things: (1) An
explicit request to do a force-quiescent-state scan, (2) The end of
the grace period, or (3) A short interval of time, after which it
will do a force-quiescent-state (FQS) scan. The explicit request can
come from rcutorture or from any CPU that has too many RCU callbacks
queued (see the qhimark kernel parameter and the RCU_GP_FLAG_OVLD
flag). The aforementioned "short period of time" is specified by the
jiffies_till_first_fqs boot parameter for a given grace period's first
FQS scan and by the jiffies_till_next_fqs for later FQS scans.
Either way, once the wait is over, the GP kthread transitions to
RCU_GP_DOING_FQS.
f. [RCU_GP_DOING_FQS] -> [RCU_GP_CLEANUP]
The RCU_GP_DOING_FQS state performs an FQS scan. Each such scan carries
out two functions for any CPU whose bit is still set in its leaf rcu_node
structure's ->qsmask field, that is, for any CPU that has not yet reported
a quiescent state for the current grace period:
i. Report quiescent states on behalf of CPUs that have been observed
to be idle (from an RCU perspective) since the beginning of the
grace period.
ii. If the current grace period is too old, take various actions to
encourage holdout CPUs to pass through quiescent states, including
enlisting the aid of any calls to cond_resched() and might_sleep(),
and even including IPIing the holdout CPUs.
These checks are skipped for any leaf rcu_node structure with a all-zero
->qsmask field, however such structures are subject to RCU priority
boosting if there are tasks on a given structure blocking the current
grace period. The end of the grace period is detected when the root
rcu_node structure's ->qsmask is zero and when there are no longer any
preempted tasks blocking the current grace period. (No, this last check
is not redundant. To see this, consider an rcu_node tree having exactly
one structure that serves as both root and leaf.)
Once the end of the grace period is detected, the GP kthread transitions
to RCU_GP_CLEANUP.
g. [RCU_GP_CLEANUP] -> [RCU_GP_CLEANED]
The RCU_GP_CLEANUP state marks the end of grace period by updating the
rcu_state structure's ->gp_seq field and also all rcu_node structures'
->gp_seq field. As before, the rcu_node tree is traversed in breadth
first order. Once this update is complete, the GP kthread transitions
to the RCU_GP_CLEANED state.
i. [RCU_GP_CLEANED] -> [RCU_GP_INIT]
Once in the RCU_GP_CLEANED state, the GP kthread immediately transitions
into the RCU_GP_INIT state.
j. The role of timers.
If there is at least one idle CPU, and if timers are not firing, the
transition from RCU_GP_DOING_FQS to RCU_GP_CLEANUP will never happen.
Timers can fail to fire for a number of reasons, including issues in
timer configuration, issues in the timer framework, and failure to handle
softirqs (for example, when there is a storm of interrupts). Whatever the
reason, if the timers fail to fire, the GP kthread will never be awakened,
resulting in RCU CPU stall warnings and eventually in OOM.
However, an RCU CPU stall warning has a large number of potential causes,
as documented in Documentation/RCU/stallwarn.rst. This commit therefore
adds analysis to the RCU CPU stall-warning code to emit an additional
message if the cause of the stall is likely to be timer failure.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because the need to wake a nocb GP kthread ("rcuog") is sometimes
detected when wakeups cannot be done, these wakeups can be deferred.
The wakeups are then carried out by calls to do_nocb_deferred_wakeup()
at various safe points in the code, including RCU's idle hooks. However,
when a CPU goes offline, it invokes arch_cpu_idle_dead() without invoking
any of RCU's idle hooks.
This commit therefore adds a call to do_nocb_deferred_wakeup() in
rcu_report_dead() in order to handle any deferred wakeups that have been
requested by the outgoing CPU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit addresses a few code-style nits in callback-offloading
toggling, including one that predates this toggling.
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit improves debuggability by indicating laying out the order
in which rcuoc kthreads appear in the ->nocb_next_cb_rdp list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit improves debuggability by indicating which grace period each
batch of nocb callbacks is waiting on and by showing the task state and
last CPU for reach nocb kthread.
[ paulmck: Handle !SMP CB offloading per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Frederic Weisbecker is adding the ability to change the rcu_nocbs state
of CPUs at runtime, that is, to offload and deoffload their RCU callback
processing without the need to reboot. As the old saying goes, "if it
ain't tested, it don't work", so this commit therefore adds prototype
rcutorture testing for this capability.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
The local callbacks processing checks if any callbacks need acceleration.
This commit carries out this checking under nocb lock protection in
the middle of toggle operations, during which time rcu_core() executes
concurrently with GP/CB kthreads.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes sure to process the callbacks locally (via either
RCU_SOFTIRQ or the rcuc kthread) whenever the segcblist isn't entirely
offloaded. This ensures that callbacks are invoked one way or another
while a CPU is in the middle of a toggle operation.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
During a toggle operations, rcu_do_batch() may be invoked concurrently
by softirqs and offloaded processing for a given CPU's callbacks.
This commit therefore makes sure cond_resched() is invoked only from
the offloaded context.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit sets SEGCBLIST_SOFTIRQ_ONLY once toggling is otherwise fully
complete, allowing further RCU callback manipulation to be carried out
locklessly and locally.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit flushes the bypass queue and sets state to avoid its being
refilled before switching to the final de-offloaded state. To avoid
refilling, this commit sets SEGCBLIST_SOFTIRQ_ONLY before re-enabling
IRQs.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit ensures that the nocb timer is shut down before reaching the
final de-offloaded state. The key goal is to prevent the timer handler
from manipulating the callbacks without the protection of the nocb locks.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To re-offload the callback processing off of a CPU, it is necessary to
clear SEGCBLIST_SOFTIRQ_ONLY, set SEGCBLIST_OFFLOADED, and then notify
both the CB and GP kthreads so that they both set their own bit flag and
start processing the callbacks remotely. The re-offloading worker is
then notified that it can stop the RCU_SOFTIRQ handler (or rcuc kthread,
as the case may be) from processing the callbacks locally.
Ordering must be carefully enforced so that the callbacks that used to be
processed locally without locking will have the same ordering properties
when they are invoked by the nocb CB and GP kthreads.
This commit makes this change.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Export rcu_nocb_cpu_offload(). ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To de-offload callback processing back onto a CPU, it is necessary
to clear SEGCBLIST_OFFLOAD and notify the nocb GP kthread, which will
then clear its own bit flag and ignore this CPU until further notice.
Whichever of the nocb CB and nocb GP kthreads is last to clear its own
bit notifies the de-offloading worker kthread. Once notified, this
worker kthread can proceed safe in the knowledge that the nocb CB and
GP kthreads will no longer be manipulating this CPU's RCU callback list.
This commit makes this change.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Offloaded CPUs do not migrate their callbacks, instead relying on
their rcuo kthread to invoke them. But if the CPU is offline, it
will be running neither its RCU_SOFTIRQ handler nor its rcuc kthread.
This means that de-offloading an offline CPU that still has pending
callbacks will strand those callbacks. This commit therefore refuses
to toggle offline CPUs having pending callbacks.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To de-offload callback processing back onto a CPU, it is necessary to
clear SEGCBLIST_OFFLOAD and notify the nocb CB kthread, which will then
clear its own bit flag and go to sleep to stop handling callbacks. This
commit makes that change. It will also be necessary to notify the nocb
GP kthread in this same way, which is the subject of a follow-on commit.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Add export per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
How the rdp->cblist enabled state is treated at CPU-hotplug time depends
on whether or not that ->cblist is offloaded.
1) Not offloaded: The ->cblist is disabled when the CPU goes down. All
its callbacks are migrated and none can to enqueued until after some
later CPU-hotplug operation brings the CPU back up.
2) Offloaded: The ->cblist is not disabled on CPU down because the CB/GP
kthreads must finish invoking the remaining callbacks. There is thus
no need to re-enable it on CPU up.
Since the ->cblist offloaded state is set in stone at boot, it cannot
change between CPU down and CPU up. So 1) and 2) are symmetrical.
However, given runtime toggling of the offloaded state, there are two
additional asymmetrical scenarios:
3) The ->cblist is not offloaded when the CPU goes down. The ->cblist
is later toggled to offloaded and then the CPU comes back up.
4) The ->cblist is offloaded when the CPU goes down. The ->cblist is
later toggled to no longer be offloaded and then the CPU comes back up.
Scenario 4) is currently handled correctly. The ->cblist remains enabled
on CPU down and gets re-initialized on CPU up. The toggling operation
will wait until ->cblist is empty, so ->cblist will remain empty until
CPU-up time.
The scenario 3) would run into trouble though, as the rdp is disabled
on CPU down and not re-initialized/re-enabled on CPU up. Except that
in this case, ->cblist is guaranteed to be empty because all its
callbacks were migrated away at CPU-down time. And the CPU-up code
already initializes and enables any empty ->cblist structures in order
to handle the possibility of early-boot invocations of call_rcu() in
the case where such invocations don't occur. So all that need be done
is to adjust the locking.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Offloading and de-offloading RCU callback processes must be done
carefully. There must never be a time at which callback processing is
disabled because the task driving the offloading or de-offloading might be
preempted or otherwise stalled at that point in time, which would result
in OOM due to calbacks piling up indefinitely. This implies that there
will be times during which a given CPU's callbacks might be concurrently
invoked by both that CPU's RCU_SOFTIRQ handler (or, equivalently, that
CPU's rcuc kthread) and by that CPU's rcuo kthread.
This situation could fatally confuse both rcu_barrier() and the
CPU-hotplug offlining process, so these must be excluded during any
concurrent-callback-invocation period. In addition, during times of
concurrent callback invocation, changes to ->cblist must be protected
both as needed for RCU_SOFTIRQ and as needed for the rcuo kthread.
This commit therefore defines and documents the states for a state
machine that coordinates offloading and deoffloading.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit gathers the rcu_segcblist ->enabled and ->offloaded property
field into a single ->flags bitmask to avoid further proliferation of
individual u8 fields in the structure. This change prepares for the
state formerly known as ->offloaded state to be modified at runtime.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds debug checks near the end of rcu_do_batch() that emit
warnings if an empty rcu_segcblist structure has non-zero segment counts,
or, conversely, if a non-empty structure has all-zero segment counts.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Fix queue/segment-length checks. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds tracing to track how the segcb list changes before/after
acceleration, during queuing and during dequeuing.
This tracing helped discover an optimization that avoided needless GP
requests when no callbacks were accelerated. The tracing overhead is
minimal as each segment's length is now stored in the respective segment.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The full memory barriers in rcu_segcblist_enqueue() and in rcu_do_batch()
are not needed because rcu_segcblist_add_len(), and thus also
rcu_segcblist_inc_len(), already includes a memory barrier *before*
and *after* the length of the list is updated.
This commit therefore removes these redundant smp_mb() invocations.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add counting of segment lengths of segmented callback list.
This will be useful for a number of things such as knowing how big the
ready-to-execute segment have gotten. The immediate benefit is ability
to trace how the callbacks in the segmented callback list change.
Also this patch remove hacks related to using donecbs's ->len field as a
temporary variable to save the segmented callback list's length. This cannot be
done anymore and is not needed.
Also fix SRCU:
The negative counting of the unsegmented list cannot be used to adjust
the segmented one. To fix this, sample the unsegmented length in
advance, and use it after CB execution to adjust the segmented list's
length.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
One counter-intuitive property of RCU is the fact that full memory
barriers are needed both before and after updates to the full
(non-segmented) length. This patch therefore helps to assist the
reader's intuition by adding appropriate comments.
[ paulmck: Wordsmithing. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tasks Trace RCU uses irq_work_queue() to safely awaken its grace-period
kthread, so this commit therefore causes the TASKS_TRACE_RCU Kconfig
option select the IRQ_WORK Kconfig option.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds self tests for early-boot use of RCU-tasks grace periods.
It tests all three variants (Rude, Tasks, and Tasks Trace) and covers
both synchronous (e.g., synchronize_rcu_tasks()) and asynchronous (e.g.,
call_rcu_tasks()) grace-period APIs.
Self-tests are run only in kernels built with CONFIG_PROVE_RCU=y.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
[ paulmck: Handle CONFIG_PROVE_RCU=n and identify test cases' callbacks. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a lockdep_assert_irqs_disabled() call to the
helper macros that release the rcu_node structure's ->lock, namely
to raw_spin_unlock_rcu_node(), raw_spin_unlock_irq_rcu_node() and
raw_spin_unlock_irqrestore_rcu_node(). The point of this is to help track
down a situation where lockdep appears to be insisting that interrupts
are enabled while holding an rcu_node structure's ->lock.
Link: https://lore.kernel.org/lkml/20201111133813.GA81547@elver.google.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a number of lockdep_assert_irqs_disabled() calls
to rcu_sched_clock_irq() and a number of the functions that it calls.
The point of this is to help track down a situation where lockdep appears
to be insisting that interrupts are enabled within these functions, which
should only ever be invoked from the scheduling-clock interrupt handler.
Link: https://lore.kernel.org/lkml/20201111133813.GA81547@elver.google.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, RCU CPU stall warning messages will NMI whatever CPU looks
like it is blocking either the current grace period or the grace-period
kthread. This can produce confusing output if the target CPU is offline.
This commit therefore checks for offline CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the RCU CPU stall-warning code detects that the RCU grace-period
kthread is being starved, it dumps that kthread's stack. This can
sometimes be useful, but it is also useful to know what is running on the
CPU that this kthread is attempting to run on. This commit therefore
adds a stack trace of this CPU in order to help track down whatever it
is that might be preventing RCU's grace-period kthread from running.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a rather obtuse string that can be printed as part of an
expedited RCU CPU stall-warning message that starts with "blocking
rcu_node structures". Under normal conditions, most of this message
is just repeating the list of CPUs blocking the current expedited grace
period, but in a manner that is rather difficult to read. This commit
therefore marks this message as "(internal RCU debug)" in an effort to
give people the option of avoiding wasting time attempting to extract
nonexistent additional meaning from this portion of the message.
Reported-by: Jonathan Lemon <bsd@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU guarantees that anything seen by a given reader will also be seen
after any grace period that must wait on that reader. This is very likely
to hold based on inspection, but the advantage of having rcutorture do
the inspecting is that rcutorture doesn't mind inspecting frequently
and often.
This commit therefore adds code to test RCU's global memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds reader-side testing of the polling grace-period API.
This testing verifies that a cookie obtained in an SRCU read-side critical
section does not get a true return from poll_state_synchronize_srcu()
within that same critical section.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds writer-side testing of the polling grace-period API.
One test verifies that the polling API sees a grace period caused by
some other mechanism. Another test verifies that using the polling API
to wait for a grace period does not result in too-short grace periods.
A third test verifies that the polling API does not report
completion within a read-side critical section. A fourth and final
test verifies that the polling API does report completion given an
intervening grace period.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The new get_state_synchronize_srcu(), start_poll_synchronize_srcu() and
poll_state_synchronize_srcu() functions need to be tested, and so this
commit prepares by renaming the rcu_torture_ops field ->get_state to
->get_gp_state in order to be consistent with the upcoming ->start_gp_poll
and ->poll_gp_state fields.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds to the poll_state_synchronize_srcu() header comment
describing the issues surrounding SRCU cookie overflow/wrap for the
different kernel configurations.
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose. The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.
As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose. The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.
As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without having
to queue (and manage) a callback. This commit therefore splits the
Tree SRCU __call_srcu() function into callback-initialization and
queuing/start-grace-period portions, with the latter in a new function
named srcu_gp_start_if_needed(). This function may be passed a NULL
callback pointer, in which case it will refrain from queuing anything.
Why have the new function mess with queuing? Locking considerations,
of course!
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without
having to queue (and manage) a callback. This commit therefore
splits the Tiny SRCU call_srcu() function into callback-queuing and
start-grace-period portions, with the latter in a new function named
srcu_gp_start_if_needed().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a polling interface for SRCU grace periods. This
polling needs to distinguish between an SRCU instance being idle on the
one hand or in the middle of a grace period on the other. This commit
therefore converts the Tiny SRCU srcu_struct structure's srcu_idx from
a defacto boolean to a free-running counter, using the bottom bit to
indicate that a grace period is in progress. The second-from-bottom
bit is thus used as the index returned by srcu_read_lock().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Fix ->srcu_lock_nesting[] indexing per Neeraj Upadhyay. ]
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Expedited RCU grace periods send IPIs to all non-idle CPUs, and thus can
disrupt time-critical code in real-time applications. However, there
is a portion of boot-time processing (presumably before any real-time
applications have started) where expedited RCU grace periods are the only
option. And so it is that experience with the -rt patchset indicates that
PREEMPT_RT systems should always set the rcupdate.rcu_normal_after_boot
kernel boot parameter.
This commit therefore makes the post-boot application environment safe
for real-time applications by making PREEMPT_RT systems disable the
rcupdate.rcu_normal_after_boot kernel boot parameter and acting as
if this parameter had been set. This means that post-boot calls to
synchronize_rcu_expedited() will be treated as if they were instead
calls to synchronize_rcu(), thus preventing the IPIs, and thus avoiding
disrupting real-time applications.
Suggested-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ paulmck: Update kernel-parameters.txt accordingly. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
PREEMPT_RT systems have long used the rcutree.use_softirq kernel
boot parameter to avoid use of RCU_SOFTIRQ handlers, which can disrupt
real-time applications by invoking callbacks during return from interrupts
that arrived while executing time-critical code. This kernel boot
parameter instead runs RCU core processing in an 'rcuc' kthread, thus
allowing the scheduler to do its job of avoiding disrupting time-critical
code.
This commit therefore disables the rcutree.use_softirq kernel boot
parameter on PREEMPT_RT systems, thus forcing such systems to do RCU
core processing in 'rcuc' kthreads. This approach has long been in
use by users of the -rt patchset, and there have been no complaints.
There is therefore no way for the system administrator to override this
choice, at least without modifying and rebuilding the kernel.
Signed-off-by: Scott Wood <swood@redhat.com>
[bigeasy: Reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ paulmck: Update kernel-parameters.txt accordingly. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On PREEMPT_RT kernels, RCU callbacks are deferred to the `rcuc' kthread.
This can stall RCU grace periods due to lengthy preemption not only of RCU
readers but also of 'rcuc' kthreads, either of which prevent grace periods
from completing, which can in turn result in OOM. Because PREEMPT_RT
kernels have more kthreads that can block grace periods, it is more
important for such kernels to enable RCU_BOOST.
This commit therefore makes RCU_BOOST the default on PREEMPT_RT.
RCU_BOOST can still be manually disabled if need be.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a call to kasan_record_aux_stack() in kvfree_call_rcu()
in order to record the call stack of the code that caused the object
to be freed. Please note that this function does not update the
allocated/freed state, which is important because RCU readers might
still be referencing this object.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_do_batch() function extracts the ready-to-invoke callbacks
from the rcu_segcblist located in the ->cblist field of the current
CPU's rcu_data structure. These callbacks are first moved to a local
(unsegmented) rcu_cblist. The rcu_do_batch() function then uses this
rcu_cblist's ->len field to count how many CBs it has invoked, but it
does so by counting that field down from zero. Finally, this function
negates the value in this ->len field (resulting in a positive number)
and subtracts the result from the ->len field of the current CPU's
->cblist field.
Except that it is sometimes necessary for rcu_do_batch() to stop invoking
callbacks mid-stream, despite there being more ready to invoke, for
example, if a high-priority task wakes up. In this case the remaining
not-yet-invoked callbacks are requeued back onto the CPU's ->cblist,
but remain in the ready-to-invoke segment of that list. As above, the
negative of the local rcu_cblist's ->len field is still subtracted from
the ->len field of the current CPU's ->cblist field.
The design of counting down from 0 is confusing and error-prone, plus
use of a positive count will make it easier to provide a uniform and
consistent API to deal with the per-segment counts that are added
later in this series. For example, rcu_segcblist_extract_done_cbs()
can unconditionally populate the resulting unsegmented list's ->len
field during extraction.
This commit therefore explicitly counts how many callbacks were executed
in rcu_do_batch() itself, counting up from zero, and then uses that
to update the per-CPU segcb list's ->len field, without relying on the
downcounting of rcl->len from zero.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit 36dadef23f ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
RCU:
- Avoid cpuinfo-induced IPI pileups and idle-CPU IPIs.
- Lockdep-RCU updates reducing the need for __maybe_unused.
- Tasks-RCU updates.
- Miscellaneous fixes.
- Documentation updates.
- Torture-test updates.
KCSAN:
- updates for selftests, avoiding setting watchpoints on NULL pointers
- fix to watchpoint encoding
LKMM:
- updates for documentation along with some updates to example-code
litmus tests
-----BEGIN PGP SIGNATURE-----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=N/iO
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner:
"RCU, LKMM and KCSAN updates collected by Paul McKenney.
RCU:
- Avoid cpuinfo-induced IPI pileups and idle-CPU IPIs
- Lockdep-RCU updates reducing the need for __maybe_unused
- Tasks-RCU updates
- Miscellaneous fixes
- Documentation updates
- Torture-test updates
KCSAN:
- updates for selftests, avoiding setting watchpoints on NULL pointers
- fix to watchpoint encoding
LKMM:
- updates for documentation along with some updates to example-code
litmus tests"
* tag 'core-rcu-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
srcu: Take early exit on memory-allocation failure
rcu/tree: Defer kvfree_rcu() allocation to a clean context
rcu: Do not report strict GPs for outgoing CPUs
rcu: Fix a typo in rcu_blocking_is_gp() header comment
rcu: Prevent lockdep-RCU splats on lock acquisition/release
rcu/tree: nocb: Avoid raising softirq for offloaded ready-to-execute CBs
rcu,ftrace: Fix ftrace recursion
rcu/tree: Make struct kernel_param_ops definitions const
rcu/tree: Add a warning if CPU being onlined did not report QS already
rcu: Clarify nocb kthreads naming in RCU_NOCB_CPU config
rcu: Fix single-CPU check in rcu_blocking_is_gp()
rcu: Implement rcu_segcblist_is_offloaded() config dependent
list.h: Update comment to explicitly note circular lists
rcu: Panic after fixed number of stalls
x86/smpboot: Move rcu_cpu_starting() earlier
rcu: Allow rcu_irq_enter_check_tick() from NMI
tools/memory-model: Label MP tests' producers and consumers
tools/memory-model: Use "buf" and "flag" for message-passing tests
tools/memory-model: Add types to litmus tests
tools/memory-model: Add a glossary of LKMM terms
...
PowerPC testing encountered boot failures due to RCU Tasks not being
fully initialized until core_initcall() time. This commit therefore
initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just
before early_initcall() time, thus allowing waiting on RCU Tasks grace
periods from early_initcall() handlers.
Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/
Fixes: 36dadef23f ("kprobes: Init kprobes in early_initcall")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
It turns out that init_srcu_struct() can be invoked from usermode tasks,
and that fatal signals received by these tasks can cause memory-allocation
failures. These failures are not handled well by init_srcu_struct(),
so much so that NULL pointer dereferences can result. This commit
therefore causes init_srcu_struct() to take an early exit upon detection
of memory-allocation failure.
Link: https://lore.kernel.org/lkml/20200908144306.33355-1-aik@ozlabs.ru/
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current memmory-allocation interface causes the following difficulties
for kvfree_rcu():
a) If built with CONFIG_PROVE_RAW_LOCK_NESTING, the lockdep will
complain about violation of the nesting rules, as in "BUG: Invalid
wait context". This Kconfig option checks for proper raw_spinlock
vs. spinlock nesting, in particular, it is not legal to acquire a
spinlock_t while holding a raw_spinlock_t.
This is a problem because kfree_rcu() uses raw_spinlock_t whereas the
"page allocator" internally deals with spinlock_t to access to its
zones. The code also can be broken from higher level of view:
<snip>
raw_spin_lock(&some_lock);
kfree_rcu(some_pointer, some_field_offset);
<snip>
b) If built with CONFIG_PREEMPT_RT, spinlock_t is converted into
sleeplock. This means that invoking the page allocator from atomic
contexts results in "BUG: scheduling while atomic".
c) Please note that call_rcu() is already invoked from raw atomic context,
so it is only reasonable to expaect that kfree_rcu() and kvfree_rcu()
will also be called from atomic raw context.
This commit therefore defers page allocation to a clean context using the
combination of an hrtimer and a workqueue. The hrtimer stage is required
in order to avoid deadlocks with the scheduler. This deferred allocation
is required only when kvfree_rcu()'s per-CPU page cache is empty.
Link: https://lore.kernel.org/lkml/20200630164543.4mdcf6zb4zfclhln@linutronix.de/
Fixes: 3042f83f19 ("rcu: Support reclaim for head-less object")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An outgoing CPU is marked offline in a stop-machine handler and most
of that CPU's services stop at that point, including IRQ work queues.
However, that CPU must take another pass through the scheduler and through
a number of CPU-hotplug notifiers, many of which contain RCU readers.
In the past, these readers were not a problem because the outgoing CPU
has interrupts disabled, so that rcu_read_unlock_special() would not
be invoked, and thus RCU would never attempt to queue IRQ work on the
outgoing CPU.
This changed with the advent of the CONFIG_RCU_STRICT_GRACE_PERIOD
Kconfig option, in which rcu_read_unlock_special() is invoked upon exit
from almost all RCU read-side critical sections. Worse yet, because
interrupts are disabled, rcu_read_unlock_special() cannot immediately
report a quiescent state and will therefore attempt to defer this
reporting, for example, by queueing IRQ work. Which fails with a splat
because the CPU is already marked as being offline.
But it turns out that there is no need to report this quiescent state
because rcu_report_dead() will do this job shortly after the outgoing
CPU makes its final dive into the idle loop. This commit therefore
makes rcu_read_unlock_special() refrain from queuing IRQ work onto
outgoing CPUs.
Fixes: 44bad5b3cc ("rcu: Do full report for .need_qs for strict GPs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jann Horn <jannh@google.com>
This commit fixes a typo in the rcu_blocking_is_gp() function's header
comment.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_cpu_starting() and rcu_report_dead() functions transition the
current CPU between online and offline state from an RCU perspective.
Unfortunately, this means that the rcu_cpu_starting() function's lock
acquisition and the rcu_report_dead() function's lock releases happen
while the CPU is offline from an RCU perspective, which can result
in lockdep-RCU splats about using RCU from an offline CPU. And this
situation can also result in too-short grace periods, especially in
guest OSes that are subject to vCPU preemption.
This commit therefore uses sequence-count-like synchronization to forgive
use of RCU while RCU thinks a CPU is offline across the full extent of
the rcu_cpu_starting() and rcu_report_dead() function's lock acquisitions
and releases.
One approach would have been to use the actual sequence-count primitives
provided by the Linux kernel. Unfortunately, the resulting code looks
completely broken and wrong, and is likely to result in patches that
break RCU in an attempt to address this appearance of broken wrongness.
Plus there is no net savings in lines of code, given the additional
explicit memory barriers required.
Therefore, this sequence count is instead implemented by a new ->ofl_seq
field in the rcu_node structure. If this counter's value is an odd
number, RCU forgives RCU read-side critical sections on other CPUs covered
by the same rcu_node structure, even if those CPUs are offline from
an RCU perspective. In addition, if a given leaf rcu_node structure's
->ofl_seq counter value is an odd number, rcu_gp_init() delays starting
the grace period until that counter value changes.
[ paulmck: Apply Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Testing showed that rcu_pending() can return 1 when offloaded callbacks
are ready to execute. This invokes RCU core processing, for example,
by raising RCU_SOFTIRQ, eventually resulting in a call to rcu_core().
However, rcu_core() explicitly avoids in any way manipulating offloaded
callbacks, which are instead handled by the rcuog and rcuoc kthreads,
which work independently of rcu_core().
One exception to this independence is that rcu_core() invokes
do_nocb_deferred_wakeup(), however, rcu_pending() also checks
rcu_nocb_need_deferred_wakeup() in order to correctly handle this case,
invoking rcu_core() when needed.
This commit therefore avoids needlessly invoking RCU core processing
by checking rcu_segcblist_ready_cbs() only on non-offloaded CPUs.
This reduces overhead, for example, by reducing softirq activity.
This change passed 30 minute tests of TREE01 through TREE09 each.
On TREE08, there is at most 150us from the time that rcu_pending() chose
not to invoke RCU core processing to the time when the ready callbacks
were invoked by the rcuoc kthread. This provides further evidence that
there is no need to invoke rcu_core() for offloaded callbacks that are
ready to invoke.
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kim reported that perf-ftrace made his box unhappy. It turns out that
commit:
ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
removed one too many notrace qualifiers, probably due to there not being
a helpful comment.
This commit therefore reinstates the notrace and adds a comment to avoid
losing it again.
[ paulmck: Apply Steven Rostedt's feedback on the comment. ]
Fixes: ff5c4f5cad ("rcu/tree: Mark the idle relevant functions noinstr")
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_cpu_starting() checks to see if the RCU core expects a
quiescent state from the incoming CPU. However, the current interaction
between RCU quiescent-state reporting and CPU-hotplug operations should
mean that the incoming CPU never needs to report a quiescent state.
First, the outgoing CPU reports a quiescent state if needed. Second,
the race where the CPU is leaving just as RCU is initializing a new
grace period is handled by an explicit check for this condition. Third,
the CPU's leaf rcu_node structure's ->lock serializes these checks.
This means that if rcu_cpu_starting() ever feels the need to report
a quiescent state, then there is a bug somewhere in the CPU hotplug
code or the RCU grace-period handling code. This commit therefore
adds a WARN_ON_ONCE() to bring that bug to everyone's attention.
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit clarifies that the "p" and the "s" in the in the RCU_NOCB_CPU
config-option description refer to the "x" in the "rcuox/N" kthread name.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: While in the area, update description and advice. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, for CONFIG_PREEMPTION=n kernels, rcu_blocking_is_gp() uses
num_online_cpus() to determine whether there is only one CPU online. When
there is only a single CPU online, the simple fact that synchronize_rcu()
could be legally called implies that a full grace period has elapsed.
Therefore, in the single-CPU case, synchronize_rcu() simply returns
immediately. Unfortunately, num_online_cpus() is unreliable while a
CPU-hotplug operation is transitioning to or from single-CPU operation
because:
1. num_online_cpus() uses atomic_read(&__num_online_cpus) to
locklessly sample the number of online CPUs. The hotplug locks
are not held, which means that an incoming CPU can concurrently
update this count. This in turn means that an RCU read-side
critical section on the incoming CPU might observe updates
prior to the grace period, but also that this critical section
might extend beyond the end of the optimized synchronize_rcu().
This breaks RCU's fundamental guarantee.
2. In addition, num_online_cpus() does no ordering, thus providing
another way that RCU's fundamental guarantee can be broken by
the current code.
3. The most probable failure mode happens on outgoing CPUs.
The outgoing CPU updates the count of online CPUs in the
CPUHP_TEARDOWN_CPU stop-machine handler, which is fine in
and of itself due to preemption being disabled at the call
to num_online_cpus(). Unfortunately, after that stop-machine
handler returns, the CPU takes one last trip through the
scheduler (which has RCU readers) and, after the resulting
context switch, one final dive into the idle loop. During this
time, RCU needs to keep track of two CPUs, but num_online_cpus()
will say that there is only one, which in turn means that the
surviving CPU will incorrectly ignore the outgoing CPU's RCU
read-side critical sections.
This problem is illustrated by the following litmus test in which P0()
corresponds to synchronize_rcu() and P1() corresponds to the incoming CPU.
The herd7 tool confirms that the "exists" clause can be satisfied,
thus demonstrating that this breakage can happen according to the Linux
kernel memory model.
{
int x = 0;
atomic_t numonline = ATOMIC_INIT(1);
}
P0(int *x, atomic_t *numonline)
{
int r0;
WRITE_ONCE(*x, 1);
r0 = atomic_read(numonline);
if (r0 == 1) {
smp_mb();
} else {
synchronize_rcu();
}
WRITE_ONCE(*x, 2);
}
P1(int *x, atomic_t *numonline)
{
int r0; int r1;
atomic_inc(numonline);
smp_mb();
rcu_read_lock();
r0 = READ_ONCE(*x);
smp_rmb();
r1 = READ_ONCE(*x);
rcu_read_unlock();
}
locations [x;numonline;]
exists (1:r0=0 /\ 1:r1=2)
It is important to note that these problems arise only when the system
is transitioning to or from single-CPU operation.
One solution would be to hold the CPU-hotplug locks while sampling
num_online_cpus(), which was in fact the intent of the (redundant)
preempt_disable() and preempt_enable() surrounding this call to
num_online_cpus(). Actually blocking CPU hotplug would not only result
in excessive overhead, but would also unnecessarily impede CPU-hotplug
operations.
This commit therefore follows long-standing RCU tradition by maintaining
a separate RCU-specific set of CPU-hotplug books.
This separate set of books is implemented by a new ->n_online_cpus field
in the rcu_state structure that maintains RCU's count of the online CPUs.
This count is incremented early in the CPU-online process, so that
the critical transition away from single-CPU operation will occur when
there is only a single CPU. Similarly for the critical transition to
single-CPU operation, the counter is decremented late in the CPU-offline
process, again while there is only a single CPU. Because there is only
ever a single CPU when the ->n_online_cpus field undergoes the critical
1->2 and 2->1 transitions, full memory ordering and mutual exclusion is
provided implicitly and, better yet, for free.
In the case where the CPU is coming online, nothing will happen until
the current CPU helps it come online. Therefore, the new CPU will see
all accesses prior to the optimized grace period, which means that RCU
does not need to further delay this new CPU. In the case where the CPU
is going offline, the outgoing CPU is totally out of the picture before
the optimized grace period starts, which means that this outgoing CPU
cannot see any of the accesses following that grace period. Again,
RCU needs no further interaction with the outgoing CPU.
This does mean that synchronize_rcu() will unnecessarily do a few grace
periods the hard way just before the second CPU comes online and just
after the second-to-last CPU goes offline, but it is not worth optimizing
this uncommon case.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit simplifies the use of the rcu_segcblist_is_offloaded() API so
that its callers no longer need to check the RCU_NOCB_CPU Kconfig option.
Note that rcu_segcblist_is_offloaded() is defined in the header file,
which means that the generated code should be just as efficient as before.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some stalls are transient, so that system fully recovers. This commit
therefore allows users to configure the number of stalls that must happen
in order to trigger kernel panic.
Signed-off-by: chao <chao@eero.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Eugenio managed to tickle #PF from NMI context which resulted in
hitting a WARN in RCU through irqentry_enter() ->
__rcu_irq_enter_check_tick().
However, this situation is perfectly sane and does not warrant an
WARN. The #PF will (necessarily) be atomic and not require messing
with the tick state, so early return is correct. This commit
therefore removes the WARN.
Fixes: aaf2bc50df ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
Reported-by: "Eugenio Pérez" <eupm90@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull RCU fix from Paul McKenney:
"A single commit that fixes a bug that was introduced a couple of merge
windows ago, but which rather more recently converged to an
agreed-upon fix. The bug is that interrupts can be incorrectly enabled
while holding an irq-disabled spinlock. This can of course result in
self-deadlocks.
The bug is a bit difficult to trigger. It requires that a preempted
task be blocking a preemptible-RCU grace period long enough to trigger
an RCU CPU stall warning. In addition, an interrupt must occur at just
the right time, and that interrupt's handler must acquire that same
irq-disabled spinlock. Still, a deadlock is a deadlock.
Furthermore, we do now have a fix, and that fix survives kernel test
robot, -next, and rcutorture testing. It has also been verified by
Sebastian as fixing the bug. Therefore..."
* 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled
- Spectre/Meltdown safelisting for some Qualcomm KRYO cores
- Fix RCU splat when failing to online a CPU due to a feature mismatch
- Fix a recently introduced sparse warning in kexec()
- Fix handling of CPU erratum 1418040 for late CPUs
- Ensure hot-added memory falls within linear-mapped region
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+ubogQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPD7B/9i5ao44AEJwjz0a68S/jD7kUD7i3xVkCNN
Y8i/i9mx44IAcf8pmyQh3ngaFlJuF2C6oC/SQFiDbmVeGeZXLXvXV7uGAqXG5Xjm
O2Svgr1ry176JWpsB7MNnZwzAatQffdkDjbjQCcUnUIKYcLvge8H2fICljujGcfQ
094vNmT9VerTWRbWDti3Ck/ug+sanVHuzk5BWdKx3jamjeTqo+sBZK/wgBr6UoYQ
mT3BFX42kLIGg+AzwXRDPlzkJymjYgQDbSwGsvny8qKdOEJbAUwWXYZ5sTs9J/gU
E9PT3VJI7BYtTd1uPEWkD645U3arfx3Pf2JcJlbkEp86qx4CUF9s
=T6k4
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Spectre/Meltdown safelisting for some Qualcomm KRYO cores
- Fix RCU splat when failing to online a CPU due to a feature mismatch
- Fix a recently introduced sparse warning in kexec()
- Fix handling of CPU erratum 1418040 for late CPUs
- Ensure hot-added memory falls within linear-mapped region
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
arm64: Add MIDR value for KRYO2XX gold/silver CPU cores
arm64/mm: Validate hotplug range before creating linear mapping
arm64: smp: Tell RCU about CPUs that fail to come online
arm64: psci: Avoid printing in cpu_psci_cpu_die()
arm64: kexec_file: Fix sparse warning
arm64: errata: Fix handling of 1418040 with late CPU onlining
The try_invoke_on_locked_down_task() function requires that
interrupts be enabled, but it is called with interrupts disabled from
rcu_print_task_stall(), resulting in an "IRQs not enabled as expected"
diagnostic. This commit therefore updates rcu_print_task_stall()
to accumulate a list of the first few tasks while holding the current
leaf rcu_node structure's ->lock, then releases that lock and only then
uses try_invoke_on_locked_down_task() to attempt to obtain per-task
detailed information. Of course, as soon as ->lock is released, the
task might exit, so the get_task_struct() function is used to prevent
the task structure from going away in the meantime.
Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/
Fixes: 5bef8da66a ("rcu: Add per-task state to RCU CPU stall warnings")
Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com
Reported-by: syzbot+f04854e1c5c9e913cc27@syzkaller.appspotmail.com
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit ce3d31ad3c ("arm64/smp: Move rcu_cpu_starting() earlier") ensured
that RCU is informed early about incoming CPUs that might end up calling
into printk() before they are online. However, if such a CPU fails the
early CPU feature compatibility checks in check_local_cpu_capabilities(),
then it will be powered off or parked without informing RCU, leading to
an endless stream of stalls:
| rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
| rcu: 2-O...: (0 ticks this GP) idle=002/1/0x4000000000000000 softirq=0/0 fqs=2593
| (detected by 0, t=5252 jiffies, g=9317, q=136)
| Task dump for CPU 2:
| task:swapper/2 state:R running task stack: 0 pid: 0 ppid: 1 flags:0x00000028
| Call trace:
| ret_from_fork+0x0/0x30
Ensure that the dying CPU invokes rcu_report_dead() prior to being powered
off or parked.
Cc: Qian Cai <cai@redhat.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Qian Cai <cai@redhat.com>
Link: https://lore.kernel.org/r/20201105222242.GA8842@willie-the-truck
Link: https://lore.kernel.org/r/20201106103602.9849-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the units of ->init_fract are milliseconds while those of
->gp_sleep are jiffies. For consistency with each other and with the
argument of schedule_timeout_idle(), this commit changes the units of
->init_fract to jiffies.
This change does affect the backoff algorithm, but only on systems where
HZ is not 1000, and even there the change makes more sense, given that the
current setup would "back off" to the same number of jiffies repeatedly.
In contrast, with this change, the number of jiffies waited increases
on each pass through the loop in the rcu_tasks_wait_gp() function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If cur_ops->sync is NULL, rcu_torture_fwd_prog_nr() will nevertheless
attempt to call through it. This commit therefore flags cases where
neither need_resched() nor call_rcu() forward-progress testing
can be performed due to NULL function pointers, and also causes
rcu_torture_fwd_prog_nr() to take an early exit if cur_ops->sync()
is NULL.
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_torture_cleanup() function fails to NULL out the reader_tasks
pointer after freeing it and its fakewriter_tasks loop has redundant
braces. This commit therefore cleans these up.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, stutter_wait() will happily spin waiting for the stutter
interval to end even if the caller is running at a real-time priority
level. This could starve normal-priority tasks for no good reason. This
commit therefore drops the calling task's priority to SCHED_OTHER MAX_NICE
if stutter_wait() needs to wait. But when it waits, stutter_wait()
returns true, which allows the caller to restore the priority if needed.
Callers that were already running at SCHED_OTHER MAX_NICE obviously
do not need any changes, but this commit also restores priority for
higher-priority callers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an rcutorture torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good. What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument. This commit therefore forces an immediate
kernel shutdown if a rcu_torture_init()-time error occurs, thus avoiding
the appearance of a hang. It also forces a console splat in this case
to clearly indicate the presence of an error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an refscale torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good. What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument. This commit therefore forces an immediate
kernel shutdown if a ref_scale_init()-time error occurs, thus avoiding
the appearance of a hang. It also forces a console splat in this case
to clearly indicate the presence of an error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an rcuscale torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good. What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument. This commit therefore forces an immediate
kernel shutdown if a rcu_scale_init()-time error occurs, thus avoiding
the appearance of a hang. It also forces a console splat in this case
to clearly indicate the presence of an error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the ability to test performance and scalability of RCU
Tasks Trace updaters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, accessing /proc/cpuinfo sends IPIs to idle CPUs in order to
learn their clock frequency. Which is a bit strange, given that waking
them from idle likely significantly changes their clock frequency.
This commit therefore avoids sending /proc/cpuinfo-induced IPIs to
idle CPUs.
[ paulmck: Also check for idle in arch_freq_prepare_all(). ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
The default value for refscale.nreaders is -1, which results in the code
setting the value to three-quarters of the number of CPUs. On single-CPU
systems, this results in three-quarters of the value one, which the C
language's integer arithmetic rounds to zero. This in turn results in
a divide-by-zero error.
This commit therefore adds bounds checking to the refscale module
parameters, so that if they are less than one, they are set to the
value one.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by "Chen, Rong A" <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
At the end of the test and after rcu_torture_writer() stalls, rcutorture
invokes show_rcu_gp_kthreads() in order to dump out information on the
RCU grace-period kthread. This makes a lot of sense when testing vanilla
RCU, but not so much for the other flavors. This commit therefore allows
per-flavor kthread-dump functions to be specified.
[ paulmck: Apply feedback from kernel test robot <lkp@intel.com>. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The infinite for-loop in rcu_tasks_wait_gp() has its only exit at the
top of the loop, so this commit does the straightforward conversion to
a while-loop, thus saving a few lines.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The lockdep_is_held() macro is defined as:
#define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
This hides away the dereference, so that builds with !LOCKDEP don't break.
This works in current kernels because the RCU_LOCKDEP_WARN() eliminates
its condition at preprocessor time in !LOCKDEP kernels. However, later
patches in this series will cause the compiler to see this condition even
in !LOCKDEP kernels. This commit prepares for this upcoming change by
switching from lock_is_held() to lockdep_is_held().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--
CC: jiangshanlai@gmail.com
CC: paulmck@kernel.org
CC: josh@joshtriplett.org
CC: rostedt@goodmis.org
CC: mathieu.desnoyers@efficios.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some architectures assume that the stopped CPUs don't make function calls
to traceable functions when they are in the stopped state. See also commit
cb9d7fd51d ("watchdog: Mark watchdog touch functions as notrace").
Violating this assumption causes kernel crashes when switching tracer on
RISC-V.
Mark rcu_momentary_dyntick_idle() and stop_machine_yield() notrace to
prevent this.
Fixes: 4ecf0a43e7 ("processor: get rid of cpu_relax_yield")
Fixes: 366237e7b0 ("stop_machine: Provide RCU quiescent state in multi_cpu_stop()")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201021073839.43935-1-zong.li@sifive.com
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
-----BEGIN PGP SIGNATURE-----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=26wi
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Changeset 53c72b590b ("rcu/tree: cache specified number of objects")
added new members for struct kfree_rcu_cpu, but didn't add the
corresponding at the kernel-doc markup, as repoted when doing
"make htmldocs":
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'bkvcache' not described in 'kfree_rcu_cpu'
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'nr_bkv_objs' not described in 'kfree_rcu_cpu'
So, move the description for bkvcache to kernel-doc, and add a
description for nr_bkv_objs.
Fixes: 53c72b590b ("rcu/tree: cache specified number of objects")
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Make all debug object descriptors constant. There is no reason to have
them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory waste.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+EMM8THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYobvLD/95P1eqk5Hku2uHeHowj9t4PVqk68Gq
71rJTj/x32JnGVsNFfwoqm0u8CueAitT1Id5aIjiMAGK2eH83StwdfqFjdHsitwl
4zH6qywjjgq86jOSXXUQ2TSyYjlL7l2Pr8jwEZkTXUrShZyHAOvD9oW3KwlyV88H
QXiTGFAm4aAaFctgGlbVafxtp1IJkS+FzFT1/cyPV064d3uGjX6maKwKjssO/8Bv
WLzPuyOKh7IoEMfyFEXw3Ks3GK3Fo9Rkm4+CNLxjWy7DX7tY2Xvu4kuPqQ0dyn31
zzxJHOESLOjtw8w0vSEKpuNyIfL/66/MF8p4CXzkUWQTa9h26yos+mDnSzxth++d
ZERCpx7udTG3BbteJ8ZEf3/QyH6kJw9RccDET180/CvhBTHELEsroy9qOfDMJkgt
RODtwh+2+O0zqUGjbqEd+PTmkU5p0UwIWAI9t7pic5Dntse7stRwotDtI0FGNnF1
aj/4ZkTb+lq3EF/x9xh6Hw/SfcVGtmySeMaPlaj9fgq39dtTPIspYeI5GieZlE0s
1ZfoRSgWA+/K9+4iTsuGvTwXnLhsRYVZl+GIkzeG2FL3euK0t+vaIvIbE9IDHdsS
mgEFaUXwIosHOfn+8f9KWl6YupBtT/4PyPVu5DseREl4up0W6s26aamM1Ml16A8x
JUNS/oa+cGpI4A==
=BP3+
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
"A small set of updates for debug objects:
- Make all debug object descriptors constant. There is no reason to
have them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory
waste"
* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Free per CPU pool after CPU unplug
treewide: Make all debug_obj_descriptors const
debugobjects: Allow debug_obj_descr to be const
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Export rcu_idle_{enter,exit} to modules to fix build issues
introduced by recent RCU-lockdep fixes (Borislav Petkov).
- Add missing return statement to a stub function in the ACPI
processor driver to fix a build issue introduced by recent
RCU-lockdep fixes (Rafael Wysocki).
- Fix recently introduced suspicious RCU usage warnings in the PSCI
cpuidle driver and drop stale comments regarding RCU_NONIDLE()
usage from enter_s2idle_proper() (Ulf Hansson).
- Fix error code path in the tegra30 devfreq driver (Dan Carpenter).
- Add missing information to devfreq_summary debugfs (Chanwoo Choi).
-----BEGIN PGP SIGNATURE-----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=lea/
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix more fallout of recent RCU-lockdep changes in CPU idle code
and two devfreq issues.
Specifics:
- Export rcu_idle_{enter,exit} to modules to fix build issues
introduced by recent RCU-lockdep fixes (Borislav Petkov)
- Add missing return statement to a stub function in the ACPI
processor driver to fix a build issue introduced by recent
RCU-lockdep fixes (Rafael Wysocki)
- Fix recently introduced suspicious RCU usage warnings in the PSCI
cpuidle driver and drop stale comments regarding RCU_NONIDLE()
usage from enter_s2idle_proper() (Ulf Hansson)
- Fix error code path in the tegra30 devfreq driver (Dan Carpenter)
- Add missing information to devfreq_summary debugfs (Chanwoo Choi)"
* tag 'pm-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix build for ARCH_APICTIMER_STOPS_ON_C3 unset
PM / devfreq: tegra30: Disable clock on error in probe
PM / devfreq: Add timer type to devfreq_summary debugfs
cpuidle: Drop misleading comments about RCU usage
cpuidle: psci: Fix suspicious RCU usage
rcu/tree: Export rcu_idle_{enter,exit} to modules
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
Fix this link error:
ERROR: modpost: "rcu_idle_enter" [drivers/acpi/processor.ko] undefined!
ERROR: modpost: "rcu_idle_exit" [drivers/acpi/processor.ko] undefined!
when CONFIG_ACPI_PROCESSOR is built as module. PeterZ says that in light
of ARM needing those soon too, they should simply be exported.
Fixes: 1fecfdbb7a ("ACPI: processor: Take over RCU-idle for C3-BM idle")
Reported-by: Sven Joachim <svenjoac@gmx.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paul E. McKenney <paulmckrcu@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The rcu_tasks_trace_postgp() function uses for_each_process_thread()
to scan the task list without the benefit of RCU read-side protection,
which can result in use-after-free errors on task_struct structures.
This error was missed because the TRACE01 rcutorture scenario enables
lockdep, but also builds with CONFIG_PREEMPT_NONE=y. In this situation,
preemption is disabled everywhere, so lockdep thinks everywhere can
be a legitimate RCU reader. This commit therefore adds the needed
rcu_read_lock() and rcu_read_unlock().
Note that this bug can occur only after an RCU Tasks Trace CPU stall
warning, which by default only happens after a grace period has extended
for ten minutes (yes, not a typo, minutes).
Fixes: 4593e772b5 ("rcu-tasks: Add stall warnings for RCU Tasks Trace")
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.7.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When rcu_tasks_trace_postgp() function detects an RCU Tasks Trace
CPU stall, it adds all tasks blocking the current grace period to
a list, invoking get_task_struct() on each to prevent them from
being freed while on the list. It then traverses that list,
printing stall-warning messages for each one that is still blocking
the current grace period and removing it from the list. The list
removal invokes the matching put_task_struct().
This of course means that in the admittedly unlikely event that some
task executes its outermost rcu_read_unlock_trace() in the meantime, it
won't be removed from the list and put_task_struct() won't be executing,
resulting in a task_struct leak. This commit therefore makes the list
removal and put_task_struct() unconditional, stopping the leak.
Note further that this bug can occur only after an RCU Tasks Trace CPU
stall warning, which by default only happens after a grace period has
extended for ten minutes (yes, not a typo, minutes).
Fixes: 4593e772b5 ("rcu-tasks: Add stall warnings for RCU Tasks Trace")
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.7.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The more intense grace-period processing resulting from the 50x RCU
Tasks Trace grace-period speedups exposed the following race condition:
o Task A running on CPU 0 executes rcu_read_lock_trace(),
entering a read-side critical section.
o When Task A eventually invokes rcu_read_unlock_trace()
to exit its read-side critical section, this function
notes that the ->trc_reader_special.s flag is zero and
and therefore invoke wil set ->trc_reader_nesting to zero
using WRITE_ONCE(). But before that happens...
o The RCU Tasks Trace grace-period kthread running on some other
CPU interrogates Task A, but this fails because this task is
currently running. This kthread therefore sends an IPI to CPU 0.
o CPU 0 receives the IPI, and thus invokes trc_read_check_handler().
Because Task A has not yet cleared its ->trc_reader_nesting
counter, this function sees that Task A is still within its
read-side critical section. This function therefore sets the
->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag.
Except that Task A has already checked the .need_qs flag, which
is part of the ->trc_reader_special.s flag. The .need_qs flag
therefore remains set until Task A's next rcu_read_unlock_trace().
o Task A now invokes synchronize_rcu_tasks_trace(), which cannot
start a new grace period until the current grace period completes.
And thus cannot return until after that time.
But Task A's .need_qs flag is still set, which prevents the current
grace period from completing. And because Task A is blocked, it
will never execute rcu_read_unlock_trace() until its call to
synchronize_rcu_tasks_trace() returns.
We are therefore deadlocked.
This race is improbable, but 80 hours of rcutorture made it happen twice.
The race was possible before the grace-period speedup, but roughly 50x
less probable. Several thousand hours of rcutorture would have been
necessary to have a reasonable chance of making this happen before this
50x speedup.
This commit therefore eliminates this deadlock by setting
->trc_reader_nesting to a large negative number before checking the
.need_qs and zeroing (or decrementing with respect to its initial
value) ->trc_reader_nesting. For its part, the IPI handler's
trc_read_check_handler() function adds a check for negative values,
deferring evaluation of the task in this case. Taken together, these
changes avoid this deadlock scenario.
Fixes: 276c410448 ("rcu-tasks: Split ->trc_reader_need_end")
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.7.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The various RCU tasks flavors currently wait 100 milliseconds between each
grace period in order to prevent CPU-bound loops and to favor efficiency
over latency. However, RCU Tasks Trace needs to have a grace-period
latency of roughly 25 milliseconds, which is completely infeasible given
the 100-millisecond per-grace-period sleep. This commit therefore reduces
this sleep duration to 5 milliseconds (or one jiffy, whichever is longer)
in kernels built with CONFIG_TASKS_TRACE_RCU_READ_MB=y.
Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Many workloads are quite sensitive to IPIs, and such workloads should
build kernels with CONFIG_TASKS_TRACE_RCU_READ_MB=y to prevent RCU
Tasks Trace from using them under normal conditions. However, other
workloads are quite happy to permit more IPIs if doing so makes BPF
program updates go faster. This commit therefore sets the default
value for the rcupdate.rcu_task_ipi_delay kernel parameter to zero for
kernels that have been built with CONFIG_TASKS_TRACE_RCU_READ_MB=n,
while retaining the old default of (HZ / 10) for kernels that have
indicated an aversion to IPIs via CONFIG_TASKS_TRACE_RCU_READ_MB=y.
Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 8344496e8b ("rcu-tasks: Conditionally compile
show_rcu_tasks_gp_kthreads()") introduced conditional
compilation of several functions, but forgot one occurrence of
show_rcu_tasks_classic_gp_kthread() that causes the compiler to warn of
an unused static function. This commit uses "static inline" to avoid
these complaints and possibly also to avoid emitting an actual definition
of this function.
Fixes: 8344496e8b ("rcu-tasks: Conditionally compile show_rcu_tasks_gp_kthreads()")
Cc: <stable@vger.kernel.org> # 5.8.x
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU Tasks Trace grace periods are too slow, as in 40x slower than
those of RCU Tasks. This is due to my having assumed a one-second grace
period was OK, and thus not having optimized any further. This commit
provides the first step in this optimization process, namely by allowing
the task_list scan backoff interval to be specified on a per-flavor basis,
and then speeding up the scans for RCU Tasks Trace. However, kernels
built with CONFIG_TASKS_TRACE_RCU_READ_MB=y continue to use the old slower
backoff, consistent with that Kconfig option's goal of reducing IPIs.
Link: https://lore.kernel.org/bpf/CAADnVQK_AiX+S_L_A4CQWT11XyveppBbQSQgH_qWGyzu_E8Yeg@mail.gmail.com/
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The n_heavy_reader_attempts, n_heavy_reader_updates, and
n_heavy_reader_ofl_updates variables are not used outside of their
translation unit, so this commit marks them static.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
CPUs can go offline shortly after kfree_call_rcu() has been invoked,
which can leave memory stranded until those CPUs come back online.
This commit therefore drains the kcrp of each CPU, not just the
ones that happen to be online.
Acked-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_segcblist_accelerate() function returns true iff it is necessary
to request another grace period. A tracing session showed that this
function unnecessarily requests grace periods.
For example, consider the following sequence of events:
1. Callbacks are queued only on the NEXT segment of CPU A's callback list.
2. CPU A runs RCU_SOFTIRQ, accelerating these callbacks from NEXT to WAIT.
3. Thus rcu_segcblist_accelerate() returns true, requesting grace period N.
4. RCU's grace-period kthread wakes up on CPU B and starts grace period N.
4. CPU A notices the new grace period and invokes RCU_SOFTIRQ.
5. CPU A's RCU_SOFTIRQ again invokes rcu_segcblist_accelerate(), but
there are no new callbacks. However, rcu_segcblist_accelerate()
nevertheless (uselessly) requests a new grace period N+1.
This extra grace period results in additional lock contention and also
additional wakeups, all for no good reason.
This commit therefore adds a check to rcu_segcblist_accelerate() that
prevents the return of true when there are no new callbacks.
This change reduces the number of grace periods (GPs) and wakeups in each
of eleven five-second rcutorture runs as follows:
+----+-------------------+-------------------+
| # | Number of GPs | Number of Wakeups |
+====+=========+=========+=========+=========+
| 1 | With | Without | With | Without |
+----+---------+---------+---------+---------+
| 2 | 75 | 89 | 113 | 119 |
+----+---------+---------+---------+---------+
| 3 | 62 | 91 | 105 | 123 |
+----+---------+---------+---------+---------+
| 4 | 60 | 79 | 98 | 110 |
+----+---------+---------+---------+---------+
| 5 | 63 | 79 | 99 | 112 |
+----+---------+---------+---------+---------+
| 6 | 57 | 89 | 96 | 123 |
+----+---------+---------+---------+---------+
| 7 | 64 | 85 | 97 | 118 |
+----+---------+---------+---------+---------+
| 8 | 58 | 83 | 98 | 113 |
+----+---------+---------+---------+---------+
| 9 | 57 | 77 | 89 | 104 |
+----+---------+---------+---------+---------+
| 10 | 66 | 82 | 98 | 119 |
+----+---------+---------+---------+---------+
| 11 | 52 | 82 | 83 | 117 |
+----+---------+---------+---------+---------+
The reduction in the number of wakeups ranges from 5% to 40%.
Cc: urezki@gmail.com
[ paulmck: Rework commit log and comment. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds an rcutorture.leakpointer module parameter that
intentionally leaks an RCU-protected pointer out of the RCU read-side
critical section and checks to see if the corresponding grace period
has elapsed, emitting a WARN_ON_ONCE() if so. This module parameter can
be used to test facilities like CONFIG_RCU_STRICT_GRACE_PERIOD that end
grace periods quickly.
While in the area, also document rcutorture.irqreader, which was
previously left out.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, registering and unregistering the OOM notifier is done
right before and after the test, respectively. This will not work
well for multi-threaded tests, so this commit hoists this registering
and unregistering up into the rcu_torture_fwd_prog_init() and
rcu_torture_fwd_prog_cleanup() functions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently in the unlikely event that buf fails to be allocated it
is dereferenced a few times. Use the errexit flag to determine if
buf should be written to to avoid the null pointer dereferences.
Addresses-Coverity: ("Dereference after null check")
Fixes: f518f154ec ("refperf: Dynamically allocate experiment-summary output buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current rcutorture forward-progress code assumes that it is the
only cause of out-of-memory (OOM) events. For script-based rcutorture
testing, this assumption is in fact correct. However, testing based
on modprobe/rmmod might well encounter external OOM events, which could
happen at any time.
This commit therefore properly synchronizes the interaction between
rcutorture's forward-progress testing and its OOM notifier by adding a
global mutex.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The conversion of rcu_fwds to dynamic allocation failed to actually
allocate the required structure. This commit therefore allocates it,
frees it, and updates rcu_fwds accordingly. While in the area, it
abstracts the cleanup actions into rcu_torture_fwd_prog_cleanup().
Fixes: 5155be9994 ("rcutorture: Dynamically allocate rcu_fwds structure")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to print the grace-period number at the start
of the test along with both the grace-period number and the number of
elapsed grace periods at the end of the test. Note that variants of
RCU)without the notion of a grace-period number (for example, Tiny RCU)
just print zeroes.
[ paulmck: Adjust commit log. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KCSAN is now in mainline, so this commit removes the stubs for the
data_race(), ASSERT_EXCLUSIVE_WRITER(), and ASSERT_EXCLUSIVE_ACCESS()
macros.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "cpu" parameter to rcu_report_qs_rdp() is not used, with rdp->cpu
being used instead. Furtheremore, every call to rcu_report_qs_rdp()
invokes it on rdp->cpu. This commit therefore removes this unused "cpu"
parameter and converts a check of rdp->cpu against smp_processor_id()
to a WARN_ON_ONCE().
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The CONFIG_PREEMPT=n instance of rcu_read_unlock is even more
aggressively than that of CONFIG_PREEMPT=y in deferring reporting
quiescent states to the RCU core. This is just what is wanted in normal
use because it reduces overhead, but the resulting delay is not what
is wanted for kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
This commit therefore adds an rcu_read_unlock_strict() function that
checks for exceptional conditions, and reports the newly started
quiescent state if it is safe to do so, also doing a spin-delay if
requested via rcutree.rcu_unlock_delay. This commit also adds a call
to rcu_read_unlock_strict() from the CONFIG_PREEMPT=n instance of
__rcu_read_unlock().
[ paulmck: Fixed bug located by kernel test robot <lkp@intel.com> ]
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A kernel built with CONFIG_RCU_STRICT_GRACE_PERIOD=y needs a quiescent
state to appear very shortly after a CPU has noticed a new grace period.
Placing an RCU reader immediately after this point is ineffective because
this normally happens in softirq context, which acts as a big RCU reader.
This commit therefore introduces a new per-CPU work_struct, which is
used at the end of rcu_core() processing to schedule an RCU read-side
critical section from within a clean environment.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The goal of this series is to increase the probability of tools like
KASAN detecting that an RCU-protected pointer was used outside of its
RCU read-side critical section. Thus far, the approach has been to make
grace periods and callback processing happen faster. Another approach
is to delay the pointer leaker. This commit therefore allows a delay
to be applied to exit from RCU read-side critical sections.
This slowdown is specified by a new rcutree.rcu_unlock_delay kernel boot
parameter that specifies this delay in microseconds, defaulting to zero.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, each CPU discovers the end of a given grace period on its
own time, which is again good for efficiency but bad for fast grace
periods, given that it is things like kfree() within the RCU callbacks
that will cause trouble for pointers leaked from RCU read-side critical
sections. This commit therefore uses on_each_cpu() to IPI each CPU
after grace-period cleanup in order to inform each CPU of the end of
the old grace period in a timely manner, but only in kernels build with
CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, each CPU discovers the beginning of a given grace period
on its own time, which is again good for efficiency but bad for fast
grace periods. This commit therefore uses on_each_cpu() to IPI each
CPU after grace-period initialization in order to inform each CPU of
the new grace period in a timely manner, but only in kernels build with
CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A given CPU normally notes a new grace period during one RCU_SOFTIRQ,
but avoids reporting the corresponding quiescent state until some later
RCU_SOFTIRQ. This leisurly approach improves efficiency by increasing
the number of update requests served by each grace period, but is not
what is needed for kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
This commit therefore adds a new rcu_strict_gp_check_qs() function
which, in CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels, simply enters and
immediately exist an RCU read-side critical section. If the CPU is
in a quiescent state, the rcu_read_unlock() will attempt to report an
immediate quiescent state. This rcu_strict_gp_check_qs() function is
invoked from note_gp_changes(), so that a CPU just noticing a new grace
period might immediately report a quiescent state for that grace period.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_preempt_deferred_qs_irqrestore() function is invoked at
the end of an RCU read-side critical section (for example, directly
from rcu_read_unlock()) and, if .need_qs is set, invokes rcu_qs() to
report the new quiescent state. This works, except that rcu_qs() only
updates per-CPU state, leaving reporting of the actual quiescent state
to a later call to rcu_report_qs_rdp(), for example from within a later
RCU_SOFTIRQ instance. Although this approach is exactly what you want if
you are more concerned about efficiency than about short grace periods,
in CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels, short grace periods are
the name of the game.
This commit therefore makes rcu_preempt_deferred_qs_irqrestore() directly
invoke rcu_report_qs_rdp() in CONFIG_RCU_STRICT_GRACE_PERIOD=y, thus
shortening grace periods.
Historical note: To the best of my knowledge, causing rcu_read_unlock()
to directly report a quiescent state first appeared in Jim Houston's
and Joe Korty's JRCU. This is the second instance of a Linux-kernel RCU
feature being inspired by JRCU, the first being RCU callback offloading
(as in the RCU_NOCB_CPU Kconfig option).
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->rcu_read_unlock_special.b.need_qs field in the task_struct
structure indicates that the RCU core needs a quiscent state from the
corresponding task. The __rcu_read_unlock() function checks this (via
an eventual call to rcu_preempt_deferred_qs_irqrestore()), and if set
reports a quiscent state immediately upon exit from the outermost RCU
read-side critical section.
Currently, this flag is only set when the scheduling-clock interrupt
decides that the current RCU grace period is too old, as in about
one full second too old. But if the kernel has been built with
CONFIG_RCU_STRICT_GRACE_PERIOD=y, we clearly do not want to wait that
long. This commit therefore sets the .need_qs field immediately at the
start of the RCU read-side critical section from within __rcu_read_lock()
in order to unconditionally enlist help from __rcu_read_unlock().
But note the additional check for rcu_state.gp_kthread, which prevents
attempts to awaken RCU's grace-period kthread during early boot before
there is a scheduler. Leaving off this check results in early boot hangs.
So early that there is no console output. Thus, this additional check
fails until such time as RCU's grace-period kthread has been created,
avoiding these empty-console hangs.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The value of DEFAULT_RCU_BLIMIT is normally set to 10, the idea being to
avoid needless response-time degradation due to RCU callback invocation.
However, when CONFIG_RCU_STRICT_GRACE_PERIOD=y it is better to avoid
throttling callback execution in order to better detect pointer
leaks from RCU read-side critical sections. This commit therefore
sets the value of DEFAULT_RCU_BLIMIT to 1000 in kernels built with
CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If there are idle CPUs, RCU's grace-period kthread will wait several
jiffies before even thinking about polling them. This promotes
efficiency, which is normally a good thing, but when the kernel
has been built with CONFIG_RCU_STRICT_GRACE_PERIOD=y, we care more
about short grace periods. This commit therefore restricts the
default jiffies_till_first_fqs value to zero in kernels built with
CONFIG_RCU_STRICT_GRACE_PERIOD=y, which causes RCU's grace-period kthread
to poll for idle CPUs immediately after starting a grace period.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because strict RCU grace periods will complete more quickly, they will
experience greater lock contention on each leaf rcu_node structure's
->lock. This commit therefore reduces the leaf fanout in order to reduce
this lock contention.
Note that this also has the effect of reducing the number of CPUs
supported to 16 in the case of CONFIG_RCU_FANOUT_LEAF=2 or 81 in the
case of CONFIG_RCU_FANOUT_LEAF=3. However, greater numbers of CPUs are
probably a bad idea when using CONFIG_RCU_STRICT_GRACE_PERIOD=y. Those
wishing to live dangerously are free to edit their kernel/rcu/Kconfig
files accordingly.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
People running automated tests have asked for a way to make RCU minimize
grace-period duration in order to increase the probability of KASAN
detecting a pointer being improperly leaked from an RCU read-side critical
section, for example, like this:
rcu_read_lock();
p = rcu_dereference(gp);
do_something_with(p); // OK
rcu_read_unlock();
do_something_else_with(p); // BUG!!!
The rcupdate.rcu_expedited boot parameter is a start in this direction,
given that it makes calls to synchronize_rcu() instead invoke the faster
(and more wasteful) synchronize_rcu_expedited(). However, this does
nothing to shorten RCU grace periods that are instead initiated by
call_rcu(), and RCU pointer-leak bugs can involve call_rcu() just as
surely as they can synchronize_rcu().
This commit therefore adds a RCU_STRICT_GRACE_PERIOD Kconfig option
that will be used to shorten normal (non-expedited) RCU grace periods.
This commit also dumps out a message when this option is in effect.
Later commits will actually shorten grace periods.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of rcuperf with the kernel's perf
feature by renaming kernel/rcu/rcuperf.c to kernel/rcu/rcuscale.c, and
also by similarly renaming the functions and variables inside this file.
This has the side effect of changing the names of the kernel boot
parameters, so kernel-parameters.txt and ver_functions.sh are also
updated. The rcutorture --torture type was also updated from rcuperf
to rcuscale.
[ paulmck: Fix bugs located by Stephen Rothwell. ]
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The x86/entry work removed all uses of __rcu_is_watching(), therefore
this commit removes it entirely.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU grace-period kthread's force-quiescent state (FQS) loop should
never see an offline CPU that has not yet reported a quiescent state.
After all, the offline CPU should have reported a quiescent state
during the CPU-offline process, or, failing that, by rcu_gp_init()
if it ran concurrently with either the CPU going offline or the last
task on a leaf rcu_node structure exiting its RCU read-side critical
section while all CPUs corresponding to that structure are offline.
The FQS loop should therefore complain if it does see an offline CPU
that has not yet reported a quiescent state.
And it does, but only once the grace period has been in force for a
full second. This commit therefore makes this warning more aggressive,
so that it will trigger as soon as the condition makes its appearance.
Light testing with TREE03 and hotplug shows no warnings. This commit
also converts the warning to WARN_ON_ONCE() in order to stave off possible
log spam.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Since at least v4.19, the FQS loop no longer reports quiescent states
for offline CPUs except in emergency situations.
This commit therefore fixes the comment in rcu_gp_init() to match the
current code.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit increases RCU's ability to defend itself by emitting a warning
if one of the nocb CB kthreads invokes the GP kthread's wait function.
This warning augments a similar check that is carried out at the end
of rcutorture testing and when RCU CPU stall warnings are emitted.
The problem with those checks is that the miscreants have long since
departed and disposed of any and all evidence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the rcu_cpu_started per-CPU variable was added by commit
f64c6013a2 ("rcu/x86: Provide early rcu_cpu_starting() callback"),
there were multiple sets of per-CPU rcu_data structures. Therefore, the
rcu_cpu_started flag was added as a separate per-CPU variable. But now
there is only one set of per-CPU rcu_data structures, so this commit
moves rcu_cpu_started to a new ->cpu_started field in that structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that sysfs can change the value of rcu_cpu_stall_ftrace_dump at any
time, this commit adds a READ_ONCE() to the accesses to that variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that sysfs can change the value of rcu_kick_kthreads at any time,
this commit adds a READ_ONCE() to the sole access to that variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that sysfs can change the value of rcu_resched_ns at any time,
this commit adds a READ_ONCE() to the sole access to that variable.
While in the area, this commit also adds bounds checking, clamping the
value to at least a millisecond, but no longer than a second.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that sysfs can change the value of rcu_divisor at any time, this
commit adds a READ_ONCE to the sole access to that variable. While in
the area, this commit also adds bounds checking, clamping the value to
a shift that makes sense for a signed long.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Frederic Weisbecker