Add helper snd_sof_device_shutdown() to wrap the platform specific
.shutdown callbacks for SOF platforms.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210113152617.4048541-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There could be more than one thread read/write the dsp_power_state
simultaneously (e.g. hda_dsp_d0i3_work and sof_ipc_tx_message), add a
mutex power_state_access to make sure the access to it is mutually
exclusive.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210105155640.3725238-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP should be notified for device removal only if the
probe was successful. Fixes the following KASAN bug:
BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707204027.114169-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch invokes the DSP power down notifier to inform
DSP that driver is going to be removed.
The module removal entails DSP power down, disabling of
IRQs and more. Therefore it is highly recommended to inform
the DSP about this upcoming event.
Due to hardware limitations on some Intel platforms it is necessary
to power gate all LPSRAM banks that were enabled prior to controller
reset. Otherwise, an attempt to write LPSRAM control registers may
have no effect.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix to return negative error code -ENOMEM from the IPC init error
handling case instead of 0, as done elsewhere in this function.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only
tag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define system-agnostic probe compress flow which serves as a base for
actual, hardware-dependent implementations.
As per firmware spec, maximum of one extraction stream is allowed, while
for injection, there can be plenty.
Apart from probe_pointer, all probe compress operations are mandatory.
Copy operation is defined as unified as its flow should be shared across
all SOF systems.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP device substates such as D0I0/D0I3
are platform-specific. Therefore, the d0_substate
field of struct snd_sof_dev is replaced
with the dsp_power_state field which represents the current
state of the DSP. This field holds both the device state
and the platform-specific substate values.
With the DSP device substates being platform-specific,
the DSP power state transitions need to be performed in
the platform-specific suspend/resume ops as well.
In order to achieve this, the ops signature has to be
modified to pass the target device state as an
argument. The target substate will be determined by
the platform-specific ops before performing the transition.
For example, in the case of the system suspending to S0IX,
the top-level SOF device suspend callback needs to
only determine if the DSP will be entering
D3 or remain in D0. The target substate in case the device
needs to remain in D0 (D0I0 or D0I3) will be determined
by the platform-specific suspend op.
With the addition of the extended set of power states for the DSP,
the set_power_state op for HDA platforms has to be extended
to handle only the appropriate state transitions. So, the
implementation for the Intel HDA platforms is also modified.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial intent of releasing resources in the .remove does not work
well with HDaudio codecs. If the probe_continue() fails in a work
queue, e.g. due to missing firmware or authentication issues, we don't
release any resources, and as a result the kernel oopses during
suspend operations.
The suggested fix is to release all resources during errors in
probe_continue(), and use fw_state to track resource allocation
state, so that .remove does not attempt to release the same
hardware resources twice. PM operations are also modified so that
no action is done if DSP resources have been freed due to
an error at probe.
Reported-by: Takashi Iwai <tiwai@suse.de>
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1161246
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200124213625.30186-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Add a state machine for FW boot to track the
different stages of FW boot and replace the boot_complete
field with fw_state field in struct snd_sof_dev.
This will be used to determine the actions to be performed
during system suspend.
One of the main motivations for adding this change is the
fact that errors during the top-level SOF device probe cannot
be propagated and therefore suspending the SOF device normally
during system suspend could potentially run into errors.
For example, with the current flow, if the FW boot failed
for some reason and the system suspends, the SOF device
suspend could fail because the CTX_SAVE IPC would be attempted
even though the FW never really booted successfully causing it
to time out. Another scenario that the state machine fixes
is when the runtime suspend for the SOF device fails and
the DSP is powered down nevertheless, the CTX_SAVE IPC during
system suspend would timeout because the DSP is already
powered down.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218002616.7652-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, SOF probes machine drivers by creating a platform device
and passing the machine description as private data.
This is driven by the ACPI restrictions. Ideally, ACPI tables
should contain the description for the machine driver. This is
not possible because ACPI tables are frozen and used on multiple
OS-es (e.g Windows).
In the case of Device Tree we don't have this restriction, so we
choose to probe the machine drivers by creating a DT node as is
the standard ALSA way.
This patch makes the probing of machine drivers from SOF
core optional allowing for Device Tree platforms to decouple
the SOF core from machine driver probing.
Along with this, it also consolidates the machine driver selection
for Intel platforms by defining optional ops for selecting the machine
driver based on the ACPI match for HDA and non-HDA platforms and
setting the mach params.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the audio-specific code in the core,
audio-specific logic in the top-level PM callbacks
and the core header files into a separate file
(sof-audio.*) in preparation for adding an
audio client device.
In the process of moving all structure definitions
for widget, routes, pcm's etc, the snd_sof_dev
member in all these structs is replaced with
the snd_soc_component member. Also, use the component
device instead of the snd_sof_dev device wherever
possible in the PCM component driver,
control IO functions and the topology parser as the
component device will be moved over to the client
device later on.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some platforms, the refcount is explicitly incremented
to prevent it from entering runtime suspend. This
should be be done during probe in the core instead
of being done in the PCM driver.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature for snd_sof_create_page_table to
take struct device pointer as an argument instead of
struct snd_sof_dev as this will be used by both the SOF
core device and its clients. Also, move the definition
out of core.c to utils.c.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to check if the DSP should be put in D0i3. This function
returns true if a stream has ignored the SUSPEND trigger to keep the
pipelines running in the DSP.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fw_ready should be a mandatory op. Make sure fw_ready ops is set
during probe.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In a number of debug cases, the DMA-based trace can add problems
(e.g. with HDaudio channel allocation). It also generates additional
traffic on the bus and if the DMA handling is unreliable will prevent
audio use-cases from working normally. Using the trace also requires
tools to be installed on the target.
The trace can be instead handled as dynamic debug. We can use a
Kconfig to force the trace to be enabled in all cases, or use a module
parameter to enable it on a need-basis, e.g. by setting "options
snd_sof sof_debug=0x1" in a /etc/modprobe.d file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increase the default timeout values for boot (100ms to 2sec) and
IPC message sending (5ms to 500ms). The values should be overridden
with values from platform data.
There is no functional need to have such short timeouts as both boot
and IPC send errors are considered fatal errors. More relaxed timeouts
are convenient when running the driver on top of emulation such as QEMU.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some configurations, it's a requirement to split the probe in two,
with a second part handled in a workqueue (e.g. for HDMI support
which depends on the DRM modules).
SOF already handles these configurations but the error flow is
incorrect. When an error occurs in the workqueue, the probe has
technically already completed. If we release the resources on errors,
this generates kernel oops/use-after-free when the resources are
released a second time on module removal.
GitHub issue: https://github.com/thesofproject/linux/issues/945
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to call snd_soc_unregister_component in case of error
because the component device is resource-managed.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_remove() disables the DSP and unmaps the DSP BAR.
Removing topology after disabling the DSP results in a
kernel panic while unloading the pipeline widget. This is
because pipeline widget unload attempts to power down
the core it is scheduled on by accessing the DSP registers.
So, the suggested fix here is to unregister the machine driver
first to remove the topology and then disable the DSP
to avoid the situation described above.
Note that the kernel panic only happens in cases where the
HDaudio link is not managed by the hdac library,
e.g. no codec or when HDMI is not supported.
When the hdac library is used, snd_sof_remove() calls
snd_hdac_ext_bus_device_remove() to remove the codec which
unregisters the component driver thereby also removing the
topology before the DSP is disabled.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent fix for the build fix caused a couple of unused variable
compiler warnings when CONFIG_SND_SOC_SOF_NOCODEC isn't set:
sound/soc/sof/core.c:263:6: warning: unused variable ‘ret’ [-Wunused-variable]
sound/soc/sof/core.c:262:28: warning: unused variable ‘machine’ [-Wunused-variable]
Fix them by adding another ifdef.
Fixes: ce38a75089 ("ASoC: SOF: core: fix undefined nocodec reference")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:
ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'
Fix by using #if !IS_ENABLED()
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sound Open Firmware driver core is a generic architecture
independent layer that allows SOF to be used on many different
architectures and platforms. It abstracts DSP operations and IO
methods so that the target DSP can be an internal memory mapped or
external SPI or I2C based device. This abstraction also allows SOF to
be run on many different VMs on the same physical HW.
SOF also requires some data in ASoC PCM runtime data for looking up
SOF data during ASoC PCM operations.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie