Commit Graph

2807 Commits

Author SHA1 Message Date
Alexandre Belloni 526b87fdba ARM: multi_v7_defconfig: add ACT8945A
ACT8945A is the PMIC present on the sama5d2 Xplained.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-04 10:45:05 +02:00
Wenyou Yang 2e1a705a84 ARM: at91/defconfig: Add ACT8945A driver
Include ACT8945A mfd, regulator and power drivers.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01 21:06:02 +02:00
Diego Dorta b57d82d7ba ARM: imx_v6_v7_defconfig: Select ADS7846 support
Add CONFIG_TOUCHSCREEN_ADS7846 support.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:59:28 +08:00
Neil Armstrong 8aa788d3e5 ARM: configs: qualcomm: Add MDM9615 missing defconfigs
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 16:51:06 -05:00
Stephan Linz e580822775 arm: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-27 08:58:40 +02:00
Javier Martinez Canillas 0650692487 ARM: multi_v7_defconfig: Enable vivid driver as a module
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-27 08:19:09 +02:00
Javier Martinez Canillas 4d7406ef08 ARM: exynos_defconfig: Enable vivid driver as a module
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-27 08:18:54 +02:00
Linus Walleij 600430882e ARM: defconfig: enable the MSM8660 pin controller
After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24 22:34:52 -05:00
Gary Bisson 77610fe6f3 ARM: imx_v6_v7_defconfig: enable USB FFS gadget
The USB Function FS gadget can be very useful for debugging.

For instance, the adbd daemon can leverage this gadget to
offer an ADB connection to the platform over USB.

Note that adbd is available on many OS/build systems:
- Ubuntu: see android-tools-adbd package [1]
- Yocto: see meta-smartphone android-tools recipe [2]
- Buildroot: see android-tools package [3]

[1] http://packages.ubuntu.com/trusty/android-tools-adbd
[2] https://github.com/shr-distribution/meta-smartphone/tree/shr/meta-android/recipes-android/android-tools
[3] https://git.buildroot.net/buildroot/tree/package/android-tools

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-21 21:47:53 +08:00
Dinh Nguyen 2baf9e9ec0 ARM: socfpga: enable PL330 DMA in socfpga_defconfig
Enable the PL330 DMA and DMATEST on SoCFPGA.

make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module
2016-06-20 11:01:00 -05:00
Ley Foon Tan 417adec309 ARM: socfpga: add PCIe to socfpga_defconfig
Enable Altera PCIe host driver, Altera MSI driver and PCIe devices.

CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
CONFIG_BLK_DEV_NVME=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IXGBE=m

Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Tien Hock Loh <thloh@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-06-20 11:00:59 -05:00
Simon Horman a1becf12c6 ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
Enable support for r8a7792 SoC in multi_v7_defconfig.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-20 17:53:03 +09:00
Simon Horman c39f2947bf ARM: shmobile: defconfig: Enable r8a7792 SoC
Enable support for r8a7792 SoC in shmobile_defconfig.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-20 17:52:49 +09:00
Olof Johansson 856dfb0ccd This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
   the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
   the AHCI controller and SATA PHY drivers
 
 - Florian removes the bcm_defconfig file which is no longer useful and updates
   multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
   Broadcom Kona platforms
 
 Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
 AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
 proof
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1BGAAoJEIfQlpxEBwcEkkgQAITurehP8Wbt0aBSt42OUmCP
 xvBTuecYkDeoZCTAT3QxfLt2f6aXHWxhl1c4nbnEF3bHqSvwDN1d4QjORC2vNN/j
 4pfLXwRN2wpWk40j7ee3rrJVM2iYyHyfa1qY3cBUD11rtBFWTX0DTvevbG9jUvsL
 dqfV51QHXAbod0L7QZKAmBmjQsjpBjDOfdrxULad0wJcOpIImDc1ynKV1PPd5hOw
 SFTyQe2rtNmhoIiLThwA694upfxPxguz6SlWZo503n6vMoF5U/z51EGne9scTTxi
 kjATpQAuYWakN3qD1AeT8oHm4/Mq5vMLqvjyRLrxlDCkrQp4UliLPEzwGIhB0BU+
 sBcmWhLieuYaR09in46wkuBbiWXGR6vh5TkN2MIlV61Y6Q99YUumTUiDO8d3fKus
 DqdPXACxpM9FoP4I/HniOMdl4FXInBqq3Ec/rBCb5fbsyxbO+FgxRBZkvZmoTouO
 6ZRIx/opi1GzW8te1hZvdzzL9uJaWFDXwnpehhQk9xlYz66R2u06lWsDsLt45DnE
 5vujTQcst6PtmqrKwehkqPDIgYRIuU1T66wPzIeMQyiF3yD/cpx+8b5j/lye8Kh+
 TaZTeCh4susttrVjhee68asFAnXpNSpwm61tNVIiypFhvrvPCLKOL0YETo/wwIJt
 AgJ92oi9NxNT4LDVdeni
 =vr6G
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig

This pull request contains defconfig changes for Broadcom ARM-based SoCs:

- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
  the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
  the AHCI controller and SATA PHY drivers

- Florian removes the bcm_defconfig file which is no longer useful and updates
  multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
  Broadcom Kona platforms

Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof

* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: Remove bcm_defconfig
  ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
  ARM: multi_v7_defconfig: Enable Broadcom STB PWM
  ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
  ARM: multi_v7_defconfig: Enable Broadcom AHCI
  ARM: multi_v7_defconfig: Enable BRCMSTB networking
  ARM: multi_v7_defconfig: Enable BCM63xx

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:52:37 -07:00
Florian Fainelli 41463c3e6e ARM: Remove bcm_defconfig
We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-16 13:40:49 -07:00
Florian Fainelli 54fa6f7dc2 ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-16 13:40:48 -07:00
Florian Fainelli 4fe42cf4f3 ARM: multi_v7_defconfig: Enable Broadcom STB PWM
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-16 13:40:48 -07:00
Florian Fainelli 62be424799 ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-16 13:40:47 -07:00
Florian Fainelli 63087386c0 ARM: multi_v7_defconfig: Enable Broadcom AHCI
Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-16 13:40:16 -07:00
Peter Chen 277ad756ea ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 11:14:45 +08:00
Marek Vasut cc45741e19 ARM: socfpga: Update socfpga_defconfig
Enable the following bits:

CONFIG_TOUCHSCREEN_STMPE
 - STMPE touchscreen support, needed on MCVEVK as it contains the
   chip. This also enables the STMPE MFD device and touchscreen
   input support.

CONFIG_USB_STORAGE
 - USB storage support is often used, so enable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-06-14 15:27:42 -05:00
Olof Johansson f52ce16be6 Defconfig changes for 4.8:
- Add at91sam9 platforms in multi_v5
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJXW0q4AAoJENiigzvaE+LCz4EP/R4VWXaAKxRrlcoYqjlohGPo
 weOH5W7llVkItWQW8sPAO1qZLH6eYH/mZWWLiAsRj932kh9NMOBvgDkfOSMuTxey
 sTIZh47OCBF+wXFEaO5O3ReEdBWnuc5YtGTGNlJ9/fq59MW6ZHg57uMCSLqCOrJc
 v49PjcXhBKhBv6OhY56t5IVKhbqXVW0HsscBKY5u5YgrT5hO/5r7rlutC06o4U8p
 Hw0LPcmwcIpzyd6lVPIRG93dBaNtEMGh0RDLJPSHoC7HxnbVfZudWuK4Qx9nAeXt
 Y5WhkWqk7Ao2NtgOaljfoA2wuRugdSR4guYTMg7FxO2uOsIOljcsJFY9kPneAbid
 QsY4u841y3AVw/DJzu9e6912Ct+KChidNJB+r3gQhH1W9QZ1JHNBR4BytNUBPB8+
 vd338/Z/6UKqWiQq9zFVeUWt7YC6uS5VVOwI5SrPFcPgTxQPkgG/4WDGz9EzMdND
 SlXdlVIlAF1rI9rGu8Z8nD/lpEB39pgu2hfe9nIhqybd6vA1orxVfyrg+KtTrn/9
 7wZTVghujnY2L9fChW9wXUubxE+6FfBe0SidnB3EqwuGvMmJ5aKLoPJ1Fpv7chW+
 Q4StNHKkGh88G7GfBLjyKJnu6rGCijj2fuBYZ3xKOepjqxGV4+IzHUVlbJSBP0KP
 TFYvl7ZY6Qom0RozZ9m8
 =nTAu
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

Defconfig changes for 4.8:
 - Add at91sam9 platforms in multi_v5

* tag 'at91-ab-4.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: multi_v5_defconfig: enable Atmel platforms

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:27:05 -07:00
Alexandre Belloni 837f27a2c1 ARM: multi_v5_defconfig: enable Atmel platforms
Enable Atmel ARMv5 platforms in multi_v5

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-11 00:58:51 +02:00
Franklin S Cooper Jr fd0c514815 ARM: keystone: Enable PINCTRL_SINGLE Config
Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-06-08 16:07:21 -07:00
Krzysztof Kozlowski 4b388071a2 ARM: exynos_defconfig: Save defconfig on current linux-next
Save defconfig on next-20160602. Most of changes are just re-ordering of
symbols.  Removed symbols:
 - FHANDLE (default y),
 - THERMAL, EXYNOS_THERMAL (selected by ARCH_EXYNOS),
 - CHROME_PLATFORMS (selected by MFD_CROS_EC),
 - EXT4_FS (selected by EXT3_FS)
 - SND_SOC_ODROIDX2 (obsolete since commit ee12a817bb ("ASoC: samsung:
   Remove unused Odroid x2/u3 machine driver"), replaced with
   SND_SIMPLE_CARD).

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-06 08:36:55 +02:00
Krzysztof Kozlowski 98b927bb0c ARM: multi_v7_defconfig: Enable s5p-secss driver
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations.  Enable the driver for it - s5p-secss to
utilize the hardware acceleration.

Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:

  algorithm        | block size [b] | average speed [MB/s] |
  cbc-aes-s5p      |             16 |                 11.5 |
  cbc-aes-s5p      |             64 |                 25.4 |
  cbc-aes-s5p      |            256 |                 41.0 |
  cbc-aes-s5p      |           1024 |                 47.4 |
  cbc-aes-s5p      |           8192 |                 49.0 |
  cbc(aes-generic) |             16 |                  0.4 |
  cbc(aes-generic) |             64 |                  1.8 |
  cbc(aes-generic) |            256 |                  6.6 |
  cbc(aes-generic) |           1024 |                 25.2 |
  cbc(aes-generic) |           8192 |                 83.1 |

Anyway enable the driver so it will get some testing coverage by
community.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-06 08:36:49 +02:00
Krzysztof Kozlowski d649ca0097 ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board
Enable drivers needed to get Exynos 4210 Universal C210 board working:
MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD
parallel output and Samsung LD9040 RGB panel.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-06 08:36:44 +02:00
Krzysztof Kozlowski 48f67d729b ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensors
The Exynos4412-based Trats2 board has CM36651 proximity/ambient light
sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC.
Enable them in defconfig to get some testing coverage and use its
features.

While saving defconfig the SND_SOC_ODROIDX2 is removed because it does
not exist since commit ee12a817bb ("ASoC: samsung: Remove unused
Odroid x2/u3 machine driver").

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-06 08:36:39 +02:00
Olof Johansson c3d66602e0 Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
    The error though depends on some uncommon build settings so it
    is not as easy to trigger.
 
 2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXS9roAAoJEME3ZuaGi4PXtOEP/RiDgd2W4lZRHoLQHOTrzVC2
 fGpSNwBPFTyemJe9+5Qm6XjqPGITn+TbiLl7QZmYu0cxympcXKVNyePiC3poP/oK
 f7yw5sfimBACba5/PvqbiqtSl4xCymBuRlhraZ4vOaRAkUPvKW8cFazudYKNLemi
 A2as/2MifWZRRUCHlaVnGVRMYZ33MZ/MWqgRTbb5ofJw54Vo9WNPgj+8dVWiM42V
 nHULYwTLAedYnlyBFQGuwcY1oJJMVdwC7SKVs2RTLYGSpBhQ9DPTMaLr2lJiSVLU
 eWbdrWRZu4+lVLbtnqmuJBNdlIFuN+cvzmqkYbCFSiJKyYbmZpksn/YF1hAOmchq
 DZwbMdaJxnoCrObDkGq6p52GjZVX0PdFgZklV34Eo577JzKO8+hLTinFSFwYkGEz
 7s2W13WyO95ldMAXoaBqI12UU5U8Blpg6YZ92c5jzS4waATxuPAcYmLnAGRabiul
 RCNrvAe6V04T5voEleCB8KVcyMVc/QeVbgpGAjwcQ0wBR+HsTUarZXMk3U6Q+u5m
 LEcgWck9nfdzaP5EEI+90xFPTfGr3xvPXgkFfcp7yx8NmNaqqSYw6kJncHBQC1LW
 eCdWNkSa5DeISR2xmaHY4g9qET+PahruoS2D5eJ4/ZiRzKYtuSe6fwKoFsJ+iQr+
 KUMP9GXMOyRo0c172e0F
 =LR9t
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes

Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
   The error though depends on some uncommon build settings so it
   is not as easy to trigger.

2. Get rid of 'samsung_device_dma_mask' defined but not used warning.

* tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: don't select keyboard driver
  ARM: samsung: improve static dma_mask definition

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-03 12:15:00 -07:00
Florian Fainelli 0fa2899546 ARM: multi_v7_defconfig: Enable BRCMSTB networking
Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-31 11:02:19 -07:00
Florian Fainelli 662068c56c ARM: multi_v7_defconfig: Enable BCM63xx
Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-31 11:02:19 -07:00
Krzysztof Kozlowski 1898994229 ARM: multi_v7_defconfig: Switch max77693 to module
The driver can be built as a module, so use this possibility.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-05-30 09:39:43 +02:00
Javier Martinez Canillas 932994da13 ARM: multi_v7_defconfig: Enable Exynos MFC driver as module
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:34:36 +02:00
Javier Martinez Canillas 2d3004b78f ARM: exynos_defconfig: Enable MFC driver as module
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:34:36 +02:00
Javier Martinez Canillas 731798c5bc ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modules
There are a bunch of media platform drivers under drivers/media/platform/
for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7.

This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:34:35 +02:00
Javier Martinez Canillas 3dfb4e634b ARM: exynos_defconfig: Enable Samsung media platform drivers as modules
There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.

This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.

Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:34:34 +02:00
Andrzej Hajda 0869f40905 ARM: multi_v7_defconfig: Enable Exynos DRM Mixer driver
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer and there are separate options to select Mixer
and HDMI.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:34:22 +02:00
Maxime Ripard 684d2d7ca3 ARM: sunxi: Enable sun4i DRM driver
Enable the new DRM driver in the sunxi default configuration

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-30 08:29:36 +02:00
Maxime Ripard d85322bf2e ARM: multi_v7: Enable sun4i DRM driver
Enable the new DRM driver in the multi_v7 defconfig

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-30 08:29:36 +02:00
Bartlomiej Zolnierkiewicz 3809e4d39c ARM: exynos_defconfig: Disable big.LITTLE switcher
Disable big.LITTLE switcher in order to allow automatic usage of
cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards.

This change should not cause any problems as arm_big_little[_dt]
driver (which is using big.LITTLE switcher support to do the "real"
big.LITTLE switching work) is not used on any Exynos SoC based
board currently.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-30 08:22:22 +02:00
Konstantin Khlebnikov 7efb2a7b85 arch/defconfig: remove CONFIG_RESOURCE_COUNTERS
This option was replaced by PAGE_COUNTER which is selected by MEMCG.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Linus Torvalds 9797f6b050 ARM: SoC defconfig updates for v4.7
As usual, a bunch of commits, mostly adding drivers and other options to
 defconfigs.
 
 We are adding three new defconfig files for the newly added 32-bit
 machines (aspeed and mps2), the rest is mainly housekeeping.
 
 The changes outside of arch/arm/config/ are for a Kconfig symbol
 that got renamed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXjWCrR//JCVInAQJlwRAA4YbJXYiFSaKkq52yG5E5TVoqiAWmpUeb
 fnJ3UBxS46qq/323jkW9w5iXvHkKVFaalN5cq52yaqOJPO7ouhUHeMwepolGgLrq
 1LVKlb8mMif/Uq3znaVge4UZYQMB8mq5YKxFk8KEQu4g+nHwJR9VKrGQCoHbDo69
 vpxA9ehFlYXFLSiqOuRlMYAcXC1or35xdg/wdME2THjTq38vQv+AUrc0KoqtWPjY
 Hf7VspPo3l5CwgXaT0AaAVEX97Xyrdz1xpOCMxIKzTDg2mlcSk5LnIK58MkkKqW3
 H0snEoAebOgrFzFP0R2WP2ZtIvfvvt3EiKijhnyudxwTaoRPSlV1g/n2VWzwcAvf
 kb9gr+C09czeNIRtgAsNceLPL0jcyHMQjf1ageCL5foDxncLB9vQzIiwcIjQPNML
 j+zobETlOFp37mDdjdzzJzrsIerBdVjE6ILrSow/hJnLPrrO7f4sDNno38alTKCa
 /WYCHVbNpJqFfk6LvGtU10h8/m88O40lMeIu/3ga+iPVUEPmn4v6mSSzVAgYSG/I
 IvgDgmqJJCo8B79soReQghp5MVWke13w0uWWBN57vJGkAstZWlvgBbjjBzgJQYyY
 DmGpRgDVZdH9fPNTevnE9+xNq2L8hlNxyTfxE1iT7r9n93XccaGJtw7r0mO+rU9c
 YZk6V+QgMKM=
 =ecJp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs.

  We are adding three new defconfig files for the newly added 32-bit
  machines (aspeed and mps2), the rest is mainly housekeeping.

  The changes outside of arch/arm/config/ are for a Kconfig symbol that
  got renamed"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
  ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
  ARM: u8500_defconfig: update sensor config
  ARM: u8500_defconfig: remove staging from defconfig
  ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
  ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
  arm/configs: Add Aspeed defconfig
  arm/configs/multi_v5: Add Aspeed ast2400
  ARM: at91: sama5: Update defconfig
  ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
  ARM: multi_v7: Enable Tegra XUSB controller in defconfig
  ARM: tegra: Enable XUSB controller in defconfig
  ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
  ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
  ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
  ARM: multi_v7_defconfig: add Atmel watchdog timers
  ARM: multi_v7_defconfig: add HLCDC drivers as modules
  ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
  ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
  ...
2016-05-18 13:07:57 -07:00
Arnd Bergmann 8a6f71ccb6 ARM: exynos: don't select keyboard driver
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?),
but this fails if CONFIG_INPUT is a loadable module:

drivers/input/built-in.o: In function `samsung_keypad_remove':
drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device'
drivers/input/built-in.o: In function `samsung_keypad_irq':
drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_irq':
include/linux/input.h:389: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_probe':
drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device'
drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability'

This removes the 'select' as suggested by Krzysztof Kozlowski and
instead enables the driver from the defconfig files.

The problem does not happen on mainline kernels, as we don't normally
build built-in input drivers when CONFIG_INPUT=m, but I am experimenting
with a patch to change this, and the samsung keypad driver showed up
as one example that was silently broken before.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.org/lkml/2016/2/14/55
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-18 16:58:10 +02:00
Arnd Bergmann 0ef659a300 ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483da ("arm/configs:
Add Aspeed defconfig"), with the old type.

This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-11 14:11:13 +02:00
Arnd Bergmann b80dc598eb Second batch of defconfig:
- sama5_defconfig: update to support easy use of systemd userspace
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJXMdEQAAoJEAf03oE53VmQa7UH/3ByvZxx5Z0lwubSwZ22p+CK
 GBxx3jR1++S3IjPvK/yMpYhbNlUlla+VMB+XPAzs/hxD4kTeJ+Y2W5Y6a0bdOu2w
 ZH5jRQ/MHgFkokP1zCOyHLkLgJXS7d0++c2KdMlDEUoAE2QWG8AXE9NhFhnr1k+q
 SCnIGq6x/zgk7JvASzWkBDe8CSPdxV0WS66YbvgITSJZ5GKVSpJYHGnUEBRLdpz5
 PoJzxYrjekfA2vClzlTYsxibWqfmVPdw8+KS5v89yUTkcQ+oEoNnFRWyflig7D2x
 0kEJox10cUHkrW6XaOL589HAiBAOjxc/iWAnZ8Ol2Z7GffShNH02ObrWu9ZJcE4=
 =h6CO
 -----END PGP SIGNATURE-----

Merge tag 'at91-defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig

Merge "Second batch of defconfig" from Nicolas Ferre:

- sama5_defconfig: update to support easy use of systemd userspace

* tag 'at91-defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
  ARM: at91: sama5: Update defconfig
  ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
  ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
  ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
  ARM: multi_v7_defconfig: add Atmel watchdog timers
  ARM: multi_v7_defconfig: add HLCDC drivers as modules
  ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
  ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
  ARM: at91/defconfig: add the HDMA controller to sama5_defconfig
2016-05-10 14:30:01 +02:00
Arnd Bergmann 2cbb21d749 aspeed defconfig for 4.7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJXMIFoAAoJEGt2WQeBR3Ce7wYP/iOKVi3PR7cvvPtI9Pt7jy69
 qWXHcM1gW/ShjiHJtsQa1KafU+AvWet+FpJZtV3NYokgq0MJ7s/9RYyWx+AqZCIn
 n/+pSuhl3MNsTDrXz4oajm+5m0lw82Qfc4xF8Pz1giss0Div3LKUX3WmcuUrk4az
 mvWrLNIWp8AqusbuETSfmSu1GEV86va65AbWAj0t3WD0RaIF9MLgqZvhm6f1Gyqh
 zowEMfTWw4rW7+qOJR0iTI7bv8Kym/3DXvkDEOw7Buqs0ORhCr/83bgKsUc83O8U
 Qwh6qP9ZaKsYva4mfSqAMWDnn74gkKpQX8oPta0AhXlubSl004fpAs43Mlf8W/KQ
 ZcLjDC9rnCpz8Mjf3dFHWimIDHkVY0DE8cDq6gJ9PP4+TvGts4br0HH+wKAMKn/2
 NBNr4sErj5o9MzkSR+9ND0f0sPrZf+04sqys/h+EDS4b+myR08rxX01hf4zoSpgy
 N/aboOOMxw0TY6qNgFlcP+x4DmWriI6eWMQCoYJzktG44vIpb/HysWAJwm05m0Hz
 Ut3yvHQrs+K1uAJk6pH0E1uKxIdqJczf93gy+oWGUuVJBY5gcSjUJCMbtKYN6QXf
 yy6d0Sv2RIKHjmMAvpgGVAgDpYnRui+YOEsTk2o78RgNATiayJG/ydNvnlboMvhk
 KqluT45DRkaSu2/DTT5v
 =tb2f
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into next/defconfig

Merge "aspeed defconfig for 4.7" from Joel Stanley:

This adds configurations used for testing Aspeed BMC SoCs, as well as adding
the v5 part to the multi defconfig.

* tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux:
  arm/configs: Add Aspeed defconfig
  arm/configs/multi_v5: Add Aspeed ast2400
2016-05-10 14:25:54 +02:00
Arnd Bergmann 11d708f414 Ux500 defconfig update for v4.7:
- Remove the unused MACH_UX500_DT option from the multi_v7 defconfig
 - Remove staging driver from u8500_defconfig
 - Update sensor support in u8500_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXMc/0AAoJEEEQszewGV1zMacQAKdlkdZgxrgtEPkadC5BYy9o
 p4BK1dEzNLbdbCvnrvoR/ubfB165If1uPFxFykqJBGpnTdpOMPWho5tgI9t2ABZz
 DzMY+HBIm36M6TeZb6q7MdYAjI2vdHHiFMVFTf5cAXlOOMO/5mCP2UhaPpbyZbt5
 /2kDNPMJPOvP1w4T866lzyNcOBYViYwVneO3HgHkElrcu1s9NCtXsSE0bYL1Ruwn
 rehd3UvnHvVDST0gfX5GW0hpKYXxga6gvdwipmcL/FL4aSBjbs5QAAvrucFbz9II
 dHtGd2nGC6hwpKutFGYWDz1vo+T9j6+NNgI2gttbGpSo6IbsAR/CgrL4rY3VMcCo
 9i8zsm6NKihSjmK+w7ECkIHuE4/6FwEQJ6wkMB1uN31R852ev5JDgPeXesimpW/D
 eWGne2642B2tVCAj4Dp7XSZ4VwhfI6ccZEXqeB7ychGHpAiI9IEnkjZ48SezN5Xf
 4RyUNBawbYoD3D7ah1bGdjIHUwfUT8ejHg+F6kRsa6SWAvTEgr4C/m3Z53ME8rdF
 arGbfBzYfR5vxvXWhYHounWSrOOHqNzHFCvAoGU5vhzbuHjVqmIv4NfVxijoyuJM
 NQ9cf6WHlRTXqWWqPtrJQT6wYDq28x7Qyua5+7Hk1m3chxVux6LzTDh7L1js4cHM
 5kP5GKAw/uVWtTS+7p4T
 =WJzV
 -----END PGP SIGNATURE-----

Merge tag 'ux500-defconfig-armsoc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/defconfig

Merge "Ux500 defconfig update for v4.7" from Linus Walleij:

- Remove the unused MACH_UX500_DT option from the multi_v7 defconfig
- Remove staging driver from u8500_defconfig
- Update sensor support in u8500_defconfig

* tag 'ux500-defconfig-armsoc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: u8500_defconfig: update sensor config
  ARM: u8500_defconfig: remove staging from defconfig
  ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
2016-05-10 14:24:06 +02:00
Linus Walleij 35bee33355 ARM: u8500_defconfig: update sensor config
The Ux500 is using buffered IIO as the sensors support
IRQs. The BH1780 ambient light sensor was added to IIO,
so disable the old misc driver and activate the driver
in IIO.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10 14:10:52 +02:00
Linus Walleij 6cf8440c2b ARM: u8500_defconfig: remove staging from defconfig
Ux500 was enabling the staging drivers due to the RMI4
touchscreen driver, this is now properly upstream, so drop
this and the dead symbol for the old RMI4 hack from
the defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10 14:10:52 +02:00
Lee Jones 3ef875479c ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-10 14:10:51 +02:00
Arnd Bergmann 48bc03e541 Merge tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "i.MX defconfig updates for 4.7" from Shawn Guo:

 - Update multi_v5_defconfig for i.MX21/27 and systemd support
 - Update imx_v6_v7_defconfig to support devices found on various i.MX6
   board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC

* tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
  ARM: multi_v5_defconfig: Enable recommended options for systemd
  ARM: multi_v5_defconfig: Enable support for MX21/MX27
  ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
  ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
  ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
2016-05-10 14:09:41 +02:00
Arnd Bergmann b6e3f6d543 Merge tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding:

Enable the XUSB pad controller and XUSB controller drivers on the Tegra
and multi-v7 default configurations.

* tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: multi_v7: Enable Tegra XUSB controller in defconfig
  ARM: tegra: Enable XUSB controller in defconfig
2016-05-10 14:09:39 +02:00
Arnd Bergmann cbf3bbeb2e Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
 entries.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJXIzjWAAoJEGFBu2jqvgRNq3sP/0sIy4dHzBZxZjWZ39GYbR2G
 HMv+mV6F0bA4UUzdA30JQFffRvt2wj6tUjlGtOQmMguMWAFCT0TLSfsw013+Tb6F
 xFcOEwrxmTVulr5yAdL6pO2HFAwzTTw1KI2FlQWwIvNUPKE5frI1lkqRa/+fdLax
 IPObxgd9kfEsv/O4ISO9Z3ZlIyo69/dVlgHRGJ+9e7cxeg4S6RV8I4/TrTiVn2lL
 2dGRMglf4R0dGSupclhDCDDxiCkGbbgpm98z43MYfOcq7XG4aSZGcTZIty+CtD7E
 qSj+oDZsSmUuA6kBn97D/BDLUibV009iu8Ien4i+A5RyIFW9BRShavKAaOESJDL6
 uhCgVP0IbuY3/0lhrQ4vclNSO961aIeU50N4xsNjz2aEAQzOCfHGyIihU2oCjVBk
 LsXumedCm1pg+lVfJsftAQn60T2u4MzpfzZB0A7crmDyVPqK1az+hx5ipcP+FFCc
 AhIjMgMObQeINq/R6H9rh4zS/fWZbQiqN14NLrmv50Ti4Mf6Cve+m4WLnmdImggi
 tvuJ5MJ+OaCy89dGb/fuGYP5iLKT+U/JsZfoSVzMyVb0A353G73juUz7/K8Wmq5c
 IwPKiCXBqM1KRcgoOFFF0KUpLo6ArR54NggYPqAUmyxxrRNQfVvMHLVBtJkWfnjl
 KFj+zfA4SPK42yMumJI7
 =ocYZ
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig

Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori:

Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
entries.

* tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable SPI and NOR as modules
  ARM: davinci_all_defconfig: support systemd
  ARM: davinci_all_defconfig: enable GPIO_SYSFS
2016-05-10 14:03:53 +02:00
Nicolas Ferre f0d523668c ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-10 09:57:44 +02:00
Vivien Didelot f81ec90fe9 net: dsa: mv88e6xxx: factorize the switch driver
Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.

This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09 14:26:13 -04:00
Joel Stanley d0bc3483da arm/configs: Add Aspeed defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:12:30 +09:30
Joel Stanley 0d0f88969d arm/configs/multi_v5: Add Aspeed ast2400
This adds the Aspeed ast2400 BMC SoC to the build.

The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250

Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09 19:08:05 +09:30
Marek Vasut c047baadb0 ARM: at91: sama5: Update defconfig
Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-06 15:53:04 +02:00
Marcel Ziswiler 2ead04d9d6 ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03 20:58:07 +08:00
Marcel Ziswiler 154e80e21b ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-03 20:58:01 +08:00
Thierry Reding fe42f03176 ARM: multi_v7: Enable Tegra XUSB controller in defconfig
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.

The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29 18:13:52 +02:00
Thierry Reding 62a4e6824e ARM: tegra: Enable XUSB controller in defconfig
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29 18:13:51 +02:00
Arnd Bergmann a651b61b87 Defconfig changes for omap2plus_defconfig for v4.7 merge window.
Mostly enable drivers used on various boards as loadable modules
 where possible. Also one warning fix related to RXKAD changes
 heading to v4.7. And run make save_defconfig to shrink down the
 size a bit.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXIia+AAoJEBvUPslcq6Vz+GgP/3ciqDZeUrfpiDLtekpwWPuC
 9XmR2PTmca7ShagqcmGQ9P/jzAQWvT8VDo91WqRpuGP/VpOC5+tYQVje9wgMFDZ/
 a2RfXPJt44xcyTNnvb887YnBafe1rK/p1cyqwX3hF8dj/k5SvoU4ObyvlOPid3JS
 hD6Zw9UXd3/Mn3QT9ibf9a3ZagN0DxDtPxWw7GLoLDZATGJynaaqimum+VUkezci
 57WNCD6nMYsDWL+rtqslgyt2HXQCWZzUGWcz1Y1z5j0akOjCMqvrYZj+BpZf6IZY
 4xzEU4rclvxTigIjm0Oh+FCdjoW4IxEDLRk+Wp6P7chSC0UvjQ29mQeC06ij0f3w
 b3/iLqjM7YD1VjKmSDViedF0XUvD1SJMn3yDjGXpbcKzzqwcmbCglTr6igUOuXaJ
 NOcOYgzQjIOhnDD7kJJeXHQKWK5tNlHXT7HY7JhB/BjgoVJ+yiiv9BRyih45qO26
 MF8WqKncUEBAxwQ/sWInkDr/IKhBkrlHBFWlfYEc0vJ0nw/AUth88mBuloT5aSAR
 hp+ephAsHr+Mo4y3TNW/TXpoMz6kbwvTtgi/1Rr07kt0aEhnjn+u310Q3nZ2cmVc
 es98xC5Ky08+SB65PIvLZSdEoQ+in0g9IiFCXqLsBA37ZtLByBWRTZFVmM6GqNQ8
 xMLhNzzgVRfz6yaiADSh
 =lX8d
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren:

Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.

* tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
  ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
  ARM: omap2plus_defconfig: Update with make savedefconfig
  ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
  ARM: omap2plus_defconfig: Enable DP83867 support
  ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
2016-04-29 00:07:48 +02:00
Arnd Bergmann 98c67e7e4c NXP LPC32xx defconfig updates for v4.7
This includes savedefconfig update of lpc32xx_defconfig, which removes
 a number of outdated config options, plus ARM PrimeCell PL17x memory
 controller driver is enabled by default now, on LPC32xx boards the
 controller is commonly used to access SDRAM and NOR.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJXIUY+AAoJEKo94to8JTllVqcP/ijFKEz8OAjP4jGKBzBN77TW
 CAOK56r+OsaFzY7FevNU802SyFiKWXOfI3t/XDZl8z2RM9MGFBIgeWGuqppRWr4s
 hD0+o0Bnps515gGJRcHazCY4Woz74/aWzU7AzHcXX89HUpZy+52xhD4WM0J5NiQB
 3+5U10HmCVe57RRxXyT/mLgC9ZZtSVkFlX0VI1VK2Nb8G+1cOJTs1MGp15AsvUAH
 5XuGwF0Nv8bvZMg9FdNgUeMr/RhoJxO/CHv2kifRaK/Bk39GPW1fWdTARE/sxmQO
 gXkrc47NwYoAAH4Jbr3Nhv1/iAyZO01HF7JouQ8MwiCTZZFd1psYfbM5LKDF0Pxr
 ymr+7ktjClWKWLlwLOko9IA8ThMc0Kh1mSPAV/rg8BlafIapTo57tr+q3hYtThDw
 Mb1dPnjexoJk5qBbu4xpfinPFlr8kAqLb0HosUms89uETwP+S/xevEfTFR2HdUW7
 TTzR3YKmDTFM05w+Skl8/4QorYxZocFNgg/gnu+wl3xxVdoD4wNtng3SsNgkaAPS
 8k99tD5jR7QFAnBRm9CaIRgUvcdCzyopTI5DP24rth5OA4Zv/q7bMxGCyS3065qv
 G67zLG0FHM/UmEP1iMJc4oCzFMK681snBme2mWXHoqVLDY0CQYo0QiOW6teOV1uu
 ybjQsYctQBzX6vCmhvHO
 =yp6h
 -----END PGP SIGNATURE-----

Merge tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/defconfig

Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy:

This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.

* tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
  ARM: LPC32xx: add PL175 memory controller driver to defconfig
  ARM: LPC32xx: defconfig update
2016-04-28 17:49:39 +02:00
Tony Lindgren 714749313d ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
These are available on n900.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27 09:40:09 -07:00
Nicolas Ferre ed87957b18 ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
Add the new sama5d2-compatible ADC driver as a module.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:07:59 +02:00
Nicolas Ferre 49518015fc ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver
as a module. It's used by sama5d2 SoC for instance.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:07:58 +02:00
Nicolas Ferre 955c1129ae ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
Add the Atmel Image Sensor Interface (ISI) VIDEO driver as a module.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:07:58 +02:00
Nicolas Ferre 54b31de0be ARM: multi_v7_defconfig: add Atmel watchdog timers
Add both Atmel watchdog timers to the multi_v7_defconfig. They are added
as part of the kernel because it's a core piece of the system.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:07:57 +02:00
Boris Brezillon a95c630724 ARM: multi_v7_defconfig: add HLCDC drivers as modules
Add the HLCDC drivers to multi_v7_defconfig.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:07:57 +02:00
Nicolas Ferre 35f110ec54 ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27 14:07:26 +02:00
Nicolas Ferre a331acbd55 ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
Add the LCD DRM driver with all its dependencies:
- the MFD driver
- the backlight PWM
- the simple panel driver

Remove the CONFIG_FB as it is not needed on any sama5 device.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27 14:07:19 +02:00
Nicolas Ferre 2b1b2f0e76 ARM: at91/defconfig: add the HDMA controller to sama5_defconfig
Selection of the HDMAC option is now needed to allow some sama5 devices
to have the DMA driver compiled and available.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27 14:07:03 +02:00
Tony Lindgren f309f54924 ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
This is in use on omap4 boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26 10:31:23 -07:00
Javier Martinez Canillas 5da86baf69 ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
Commit 648af7fca1 ("rxrpc: Absorb the rxkad security module") changed
the RXKAD Kconfig symbol from tristate to boolean but the commit didn't
update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module.

This leads to the following warning when using the omap2plus_defconfig:

arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26 10:30:02 -07:00
Arnd Bergmann d528c74e69 Renesas ARM Based SoC Pci Defconfig Updates for v4.7
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXHrmwAAoJENfPZGlqN0++PKUP/R5UOgaOGbsUJRCKmk2JVEvO
 8bpPOfYY2vbgR8ZSRPb/7svHyUztjbi3FdyvvCAzOli+pFLLUxd87mkK83te3uRJ
 Aw3kBUVo+I7STtrvKpGThQ7BoDslhn8BolsmXAtWx2i+/Io2TBgyCRJXvEt1AaSV
 BYNjT4SMlHUfWFAAm3bTQgSinbmC+i3+PETC7dUNKj180bONSizH81Xl1byqOBYI
 dlHdvRl3IdtAfUrHIKZShZj4lW9XhbhmY2zRWKa4KA6P89aYuXOs4NvOvObw3yYr
 x2BSd+zz69RVlG3DKod6LGlp6At73xH1R8HplqIdmjqH03LFx9Av2jkViLhCnmep
 J25ev6BeF7q1wtSX4PJYD6fj8eYCGYK7s5fTmj+p3BGqFNqt20f+/5EgBfXtdBWd
 3MfJETv7g6uf5DaKzRjwKkZMTBTY4F5yLpNetJ/38ymjl6W167H+OlcejSrw8Sb1
 FsHH/m6dgjXctQbJMcJIbNGVCBEhFEj7EJtHs3kene16DssmNprgDJxXeE95K75D
 zbPo4Fu6M2r7cuDhFEMprIbj1411876qK5kvUMLBts7OrPlENqLQL5gOFsAPBJs8
 hPJu+nTtdA8LmhI8uFrWBnyNWdq3vyilJiYchwkvIX7C/Mmn+B6+6sB2L7tlcCTI
 Bkvag46VMFelWMqci0kB
 =HTRw
 -----END PGP SIGNATURE-----

Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:

* Remove Gen2 designation from Kconfig for R-Car PCIE driver

* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  PCI: rcar-pcie: Remove Gen2 designation from Kconfig
2016-04-26 13:11:15 +02:00
Vladimir Murzin 58e696d111 ARM: configs: add MPS2 defconfig
This patch adds a new config for MPS2 platform.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-04-26 12:53:14 +02:00
Arnd Bergmann be36ad26b4 ARM: Keystone HOTPLUG and PSCI config update for 4.7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXHk7ZAAoJEHJsHOdBp5c/JaAP/jMRvUw04rVgaqIIdHI8mb0c
 bQ9FSm3hqg9lJm2V3TuTbgk/OkOvm0lxBWB5Xtw0GoFiH9VDvsfBffoGAltmE2e4
 Tp9LHqrE3nmREjQ5IJvq8u4r4fehoI8wUdIPehaMu4jwneOzWuSzyF7HOSpgF44o
 Q+VamDMGhBgj7tF4w+vcLsMbNdMTcbDsC4Ftn1isRHFl1oWwxQ2MrgiE8ROpJaQu
 E99vU5EM7MqwvL9k39JxuRQj8WY8JoTdHNsmXMhXrxgyB2qJf9sR1cC3ydWbmOjN
 7QHnjRMVp3uzswdbaCI9tHxR4HTr75mpfXzwQ1q/xh7HFw1ovc9Gzz8SoWGoIQ7h
 H7OhOVYZDInAsOr8fSZbztLbfPtQgonpr0c6HGte/Ww3AsYUCW1RQ6isyktaxDeI
 J5EBrDtmbTkahjz9EO94c1PPqfBWAutC4szNEqxJZzkG1zbXdf+d79q2l4f5YW6r
 fL99MwDP502DokE1B6KSnZOYmcrI3QECSfsAvuWBFsBGTXIy/Ky1PJE10Ge63ZcA
 4r9/qdlJIeSTi84bEa1048cT8H4FIwydWURufHXrpkOxxaIRxFfFCOOeTYIDRtrc
 w3HeuEuXtCc4lpwIQcYmSH6SBaRrBqlYg6WLPKDxZKIBkHfe6xueXMJ4ERmR9DMH
 GPfpCwxMvrb7EBNauNrh
 =mxpo
 -----END PGP SIGNATURE-----

Merge tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

Merge "ARM: Keystone HOTPLUG and PSCI config update for 4.7" from Santosh Shilimkar

* tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone: Add CPU Hotplug related options
2016-04-25 21:12:32 +02:00
Arnd Bergmann ccb0f688ea This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
   switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
 
 - Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
   Power Management support, switching sdhci-bcm2835 for sdhci-iproc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXG8pNAAoJEIfQlpxEBwcEipUQAMqVGtqqdxEEGa0nwGGabpms
 oxKUkAPgflzYWoPy28WoCoaRGceNz+aP1H204nqJqXhHbUKeJaTPTu6TwMMMx2K5
 vBsGQan7flOuPEaGEsRTb5bxG6DoTxa9FdfMFmekUWwEaxvmTwvjqyh62P9AwNOH
 IKKdHOCIqJmMOcvzr8Ptr2Z2+2wOojzteyo7U5WZ0oqg/+UIKRnnQqX/k+OE8swj
 iX7u48fhtymPk/wDCks51IsV9PdJLIITqg73Dtxp7ltY1tvPDMUdsZyWOxo3A8b7
 B8251VD/njgITbFOZUDn7X0QdH0NPwuZzIcp3Mdcz/ZPy++uJbotKSHOKFsnZXuU
 f5DfR8UleJ8IadOUpLVDG3mr5tX7UyxogN35cmA9X394T9qKgaq9626namcGWS/1
 LfSD+Tg/AQQUA4sK8rhk7qXSTO0VLKTP314l/TyV2L5qMeZPsoabAllYhC5/XcXI
 2nwsqbUxvyUAt2asiVtPOA5sFHCkyT7Cq55mxYbqOEdqteSJm2iqWRLBh90C2F6X
 c0JpdFZs9Ag5LOjRr9k6cDb9XhWdhdIk9Xpq1KPVsQBq7F8giNgIq21nsup8FYr4
 eokJHLnM6lfGzaNOnlg6sCE6Aqt9g63OFCvTIR9ylJTWvptK+ZwWqQdL9Sp0IjvI
 A5D+RGyAqRc6zWDECeKq
 =QxkI
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig

Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs"
from Florian Fainelli:

- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
  switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller

- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
  Power Management support, switching sdhci-bcm2835 for sdhci-iproc

* tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: bcm2835: Enable NFS root support.
  ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
  ARM: bcm2835: Enable CONFIG_PM.
  ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
  ARM: multi_v7_defconfig: Build in DWC2 USB support
  ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
  ARM: multi_v7_defconfig: Add more BCM2835 support
2016-04-25 21:11:13 +02:00
Arnd Bergmann dbb2bc9118 mvebu defconfig for 4.7 (part 1)
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
   defcongig files
 - Attach mvebu_*_defconfig to the mvebu maintainers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlcPzQsACgkQCwYYjhRyO9UpUwCghNZsWe0jSWCZyVbmLS4qCGT/
 X3oAn1wc1CeLHFDroMVcCw3aBaTLofUP
 =LxX6
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu into next/defconfig

Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT

- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
  defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers

* tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
  ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
  MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers
  ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
2016-04-25 21:10:07 +02:00
Masahiro Yamada f429ff10e6 ARM: multi_v7_defconfig: enable Denali NAND controller
This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25 21:08:19 +02:00
Arnd Bergmann 28363d9357 Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.7:
1. Enable additional drivers for Trats2 board (Exynos4412).
 2. Enable CPUFreq governors as modules.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXDhLzAAoJEME3ZuaGi4PXB1IP/29bsoVGdNCyN+u3wyZdznwl
 HXCIs6SaJWBfDOKDxHqs489dVPC/a2m1D1DmdH7+VNyH/+Tbcef1cEL/j9HW78H0
 77fh78EHho8R/xuqBmEV6b+SiyKviT5XXnbm4at0m9NWX0C21LuD931cpEo+rWZV
 BYbafc2L5SOJeeZU9fKvvREpE4OnDsduOiUmEmW1Tq7oiDHtz4RbABBZ/J+L9liU
 v1zgYzVIAmw7ifRIPTOw5dUuy29WQaEGHHu8zaE4nUhwinBxY0H6ikMEUUN1fE7y
 I4Cyv8v9EBibHf7HG8kbwL938Ecud05UioCPNNEL/jMJ+jz+EecWLs2whZ8rvmx3
 M28yr70RdUQizxXNh+1IczzOzkvrFECinqFjP4UE9IykqKNxxx3Af/JgxsN8xnNz
 rEzybrg0p48DZpfD1jqOTAWLwabFyJP6EQ7rI0MufT8oYL25fpCFwLaRjsYjhz+f
 wpsAo1hn6TrTZ/ZXn4RAon3ynBlVmzSfCalgOJ0m5LwEneR8ws3+bmusevhjTg7T
 4/U08+yFd4SFZMTodhy2is6lrj2WGpaYSAW5wwyVS2KzZO3AvzFssL6c8kXnz+lZ
 aO/UiZLkF12s/PjWxU5cGIA5PdMqAYjE2XOXTLJ1hq+RPrh1Apdo/Mdxk255zK7L
 psVJJkBahcr+a5NsSElR
 =9A55
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Merge "Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.7" from Krzysztof Kozłowski:

1. Enable additional drivers for Trats2 board (Exynos4412).
2. Enable CPUFreq governors as modules.

* tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
  ARM: exynos_defconfig: Enable CPUFreq governors as modules
  ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors
2016-04-25 21:05:37 +02:00
Kevin Hilman 8b182f395a ARM: davinci_all_defconfig: enable SPI and NOR as modules
Enable SPI driver and SPI NOR flash support as modules.

Tested with SPI NOR flash on DA850-EVM.  Basic boot test only to confirm
NOR flash device detection.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25 18:37:57 +05:30
Sekhar Nori 1e3404131b ARM: davinci_all_defconfig: support systemd
CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.

While at it, remove stale entry CONFIG_INOTIFY=y

[1] https://github.com/systemd/systemd/blob/master/README#L37

Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25 18:19:14 +05:30
Simon Horman 350a73b4f8 PCI: rcar-pcie: Remove Gen2 designation from Kconfig
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.

Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-22 10:14:34 +10:00
Vladimir Zapolskiy 3b3c6ad535 ARM: LPC32xx: add PL175 memory controller driver to defconfig
The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-21 22:25:26 +03:00
Vladimir Zapolskiy ae35557bb0 ARM: LPC32xx: defconfig update
The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:

  CONFIG_BINFMT_AOUT=y   -- not needed, legacy
  CONFIG_FPE_NWFPE=y     -- not needed, AEABI build
  CONFIG_IPV6_PRIVACY=y  -- removed build option
  CONFIG_IPV6=y          -- selected by default
  CONFIG_MII=y           -- not needed, board phys don't select library
  CONFIG_MTD_CHAR=y      -- removed build option
  CONFIG_MTD_M25P80=y    -- not needed, AT25 EEPROM driver is in use
  CONFIG_USB_PHY=y       -- selected by default

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-04-21 22:24:57 +03:00
Romain Perier 23d2af622d ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-14 18:57:19 +02:00
Romain Perier f092d43801 ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
This enables the new driver for Marvell CESA crypto engines on all ARMv7.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-14 18:56:50 +02:00
Romain Perier a354d958d4 ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
This enables the new driver for Marvell CESA crypto engines on all mvebu v7.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-14 18:56:28 +02:00
Sekhar Nori c03225fd6b ARM: davinci_all_defconfig: enable GPIO_SYSFS
CONFIG_GPIO_SYSFS provides a convenient way to
access GPIOs from userspace.

Enable it for DaVinci.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 11:45:02 +05:30
Olof Johansson 7d7bca889f Highlights:
-----------
  - Enable ST's HW Random number generator in multi_v7 defconfig
  - Enable PWM regulator support in multi_v7 defconfig
  - Enable ST's Power and Reset driver in multi_v7 defconfig
  - Enable ST's PWM in multi_v7 defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXB5rtAAoJEMo4jShGhw+J90cQAMWukGB9Hee2Y2y/roZZNuR9
 XEa0/oQ/b1Sp8WjcNKLuXR5JxD0dt/0c9Hog0riK4jH58b50m4/ZEOLQ7ElWzMnd
 BdYD6Ipkm0Ot5VEReAyU7bmCDzFWLyZBWtCuwslerFSYVC/IiHAMMeijnxE7RShm
 UiuDHQwvvRdkiJX5VAzUqeVG3Sfd24fbnV91nu6otPAgfbv1+wBIqEEmHJJ+aMdA
 PLiQzgVhFzAzrZzc0KkdUPG5o1wEvSmHQ+NCGHwH4UMpdX6U5fqoJ5HIIV5mUpwr
 ho7I6VCDj7DYATsKa//QiciWzVGsAaaVVjS0WOJ9WJfXkWStzvPGj8nzuCnJtmrZ
 JKg3aifgwBxxTWZ+snjBxA5wSW0aJUWGwMOP4lkU1wUqSpgFYT4/khOYZLVh8jkl
 u3y8U4BZrY/sfTPuBKH37cd2LVOdndKp9kJdzwG30cIfY2DZ6tD1vnTKK3b6mcoo
 RzYsoNCqtgfODtD/ThQmH5YwpG1jegzvuP6Ef36a1HhKeXpIvP2Vt4DUeCIQQN2N
 BFD8HLfQlxxHNPJH6tUioR61BgYnd7Z7CifVSlDqF2iX86XlpthEVLZhyAksYjwc
 t6OEULrwe7vuk7sMrqVrZOCNUkQtPLIc3puqP9Bia+EajgBibCOkOkuPaSUhvtC6
 HsTzavpiE+420tuJGTZL
 =OJtH
 -----END PGP SIGNATURE-----

Merge tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig

Highlights:
-----------
 - Enable ST's HW Random number generator in multi_v7 defconfig
 - Enable PWM regulator support in multi_v7 defconfig
 - Enable ST's Power and Reset driver in multi_v7 defconfig
 - Enable ST's PWM in multi_v7 defconfig

* tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
  ARM: multi_v7_defconfig: Enable support for PWM Regulators
  ARM: multi_v7_defconfig: Enable ST's Power Reset driver
  ARM: multi_v7_defconfig: Enable ST's PWM driver

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13 15:43:50 -07:00
Heiko Stuebner b6ac00bb9f ARM: multi_v7_defconfig: Enable new Rockchip display-controller drivers
Three types of display controller-drivers where added recently. The
Analogix Displayport variant and Designware MIPI DSI used for example
on the rk3288 as well as the Innosilicon HDMI controller used on the
rk3036.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13 15:24:56 -07:00
Heiko Stuebner 0d14513bc2 ARM: multi_v7_defconfig: Enable Rockchip displayport phy
The displayport phy controls the output of the Analogix displayport
controller on Rockchip SoCs and is therefore one component to enable
veyron devices to use their internal display.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13 15:24:44 -07:00
Tony Lindgren 0eafc36b7b ARM: omap2plus_defconfig: Update with make savedefconfig
This shrinks the defconfig a bit and makes it easier to
generate minimal patches against it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13 14:45:47 -07:00
Yegor Yefremov df4b461dcc ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
MDIO Bus/PHY emulation with fixed speed/link PHYs will be used in
Baltos iR5221 devices to connect to ICPlus IP175D switch IC.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13 14:44:53 -07:00
Nishanth Menon 73489eead2 ARM: omap2plus_defconfig: Enable DP83867 support
Enable DP83867 Ethernet phy for supporting networking on DRA72-EVM rev C
(SR2.0).

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13 14:42:14 -07:00
Lokesh Vutla 7e09d775e8 ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
Enable the TI TPIC2810 8-Bit LED Driver with I2C Interface. This is used
in AM335x ICEv2 Boards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13 14:40:50 -07:00
Keerthy 9120abdcdb ARM: configs: keystone: Add CPU Hotplug related options
Add the config options needed to get CPU hotplug functional.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2016-04-13 08:56:15 -07:00
Jan Luebbe 2556247dea ARM: multi_v5_defconfig: Enable recommended options for systemd
Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by
systemd (which also matches the multi_v7 defconfig). Also enable IPV6,
which defaults to 'y' by now.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12 22:31:42 +08:00
Javier Martinez Canillas 0fe3ff4454 ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
Currently only the ondemand and performance CPUFreq policy governors are
enabled in multi_v7 defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.

The options are enabled as module to keep the kernel image size minimal.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-12 16:19:14 +02:00
Javier Martinez Canillas 98d729c4b2 ARM: exynos_defconfig: Enable CPUFreq governors as modules
Currently only the ondemand and performance CPUFreq policy governors are
enabled in the Exynos defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.

The options are enabled as module to keep the kernel image size minimal.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-12 16:14:17 +02:00
Krzysztof Kozlowski e0bef81db1 ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors
The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis
Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen
and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to
get some testing coverage and use its features.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-12 16:09:45 +02:00
Lee Jones 6d54fb8a08 ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2016-04-07 09:38:13 +02:00
Jan Luebbe d7e7479b21 ARM: multi_v5_defconfig: Enable support for MX21/MX27
Although the SoC support was already enabled, the drivers and machines
were missing.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06 22:38:36 +08:00
Gary Bisson fd84aa108a ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06 22:34:21 +08:00
Gary Bisson e70e18d6e0 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06 22:34:18 +08:00
Gary Bisson 6fbe99046d ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
Those two touch controllers are used by Boundary Devices platforms.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06 22:34:14 +08:00
Lee Jones 95e2106f46 ARM: multi_v7_defconfig: Enable support for PWM Regulators
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2016-04-06 13:36:08 +02:00
Lee Jones 39b86a3e8b ARM: multi_v7_defconfig: Enable ST's Power Reset driver
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2016-04-06 13:36:08 +02:00
Lee Jones daf7bb1dde ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2016-04-06 13:36:08 +02:00
Eric Anholt 3652bb35ab ARM: bcm2835: Enable NFS root support.
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.

Signed-off-by: Eric Anholt <eric@anholt.net>
2016-04-04 11:03:30 -07:00
Eric Anholt 4400d9ac05 ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
Combined with the queued DT changes, we now get HDMI and 3D support.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 11:03:25 -07:00
Eric Anholt 8d1a8c92a8 ARM: bcm2835: Enable CONFIG_PM.
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 11:03:22 -07:00
Eric Anholt bf9dbf50b1 ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
This approximately triples write performance for the SD card.  My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'.  Read
performance appears to be unaffected.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 11:03:07 -07:00
Eric Anholt 54fff103fd ARM: multi_v7_defconfig: Build in DWC2 USB support
This allows the Raspberry Pi 2 to be network booted from the
defconfig.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 11:03:02 -07:00
Eric Anholt abcfccdfa1 ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
This approximately triples write performance for the SD card.  My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'.  Read
performance appears to be unaffected.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 11:02:54 -07:00
Eric Anholt 8f03488b74 ARM: multi_v7_defconfig: Add more BCM2835 support
The WDT is required for reboot and I2S is used for audio devices on
the P5 header (or BT audio on the Pi3).

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-04 10:59:31 -07:00
Linus Walleij 427b1d3faa ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
The Ux500 boards may have an RMI4 unit, and the DT fragments for
them have been merged upstream. Add it to the defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-30 00:26:15 +02:00
Wolfram Sang 352486b164 ARM: shmobile: defconfig: enable I2C demultiplexer and slave eeprom
The Lager board shall be the reference platform for the runtime I2C IP
core switcher and for I2C slave support. Enable the needed drivers for
this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28 10:05:01 +09:00
Wolfram Sang 651435d682 ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom
The Renesas Lager board shall be a reference platform for the runtime
I2C IP core switcher and for I2C slave support. Enable the needed
drivers for this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28 08:59:13 +09:00
Linus Torvalds e3b1f64e04 ARM: SoC defconfig updates for v4.6
As usual, a bunch of commits, mostly adding drivers and other options to
 defconfigs.
 
 The realview_smp_defconfig and realview_defconfig got merged into one,
 so we are now down to 110 files.
 
 For stm32, we have now added a Kconfig fragment, the first such
 file on arch/arm. The purpose here is to have a shared defconfig
 file that works for all boards, while the DRAM offset has to be
 hardwired on NOMMU machines at compile time.
 
 The Exynos defconfig changes depend on changes in the RTC tree,
 so this is pulled in here, but has already been merged into 4.6 now.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu67N2CrR//JCVInAQIW4A//YRCJQV8655S9OmFtGU7/Yl541KIvlaYs
 mrmiGtqtjQ4rJjtW1f9vhQsls+ZC1eFL194/beS/9FNThJNp5ZuZTkXce1j/m2xY
 umcsV8emYx0KATIyUIrrXu1LX/BwdXwcZxu0WZDIYdtRgY+94PmS0xqHM98jCmKV
 yRuPgYk4cre8GWX2Bg4WdzqKCK/TIdJYz2uprP3xQ7QDi8BFDPx8EuKXLgDwzZ3a
 WRztWMzK2aAoJjZBSxr8jMx6F2Cl1xYm+Hjt81u2czqSHx3q8s9JWiEGqZqurRdh
 DbQ4jAeqh1shEemf85wcPthDZGVxSmJs0Ct0ewIpjnMqYAaxiVShUtTjxgcmdyyK
 XsRRgcWXZdFT0+plyh08BvzXPMWsYif/BPFnXFILSyrUGulN1rV75Xi47OfooPOD
 RwyiieE/u8iEbcPKH5rxQmUb7uKdNJ1xu3XfTJibXd8cp8LnbLjfTPE8V0/DPKZb
 88DoxovjTFPHRNT4YlFFeK8qjzngPoGwysX1X8bvsMuk5c0ibA5H5XmRHqh7KiUH
 Qjk1RNkZ2t6W2YVNwt5qTyaXdIH4Itschy0d8L+pdhsZ7ysB7jMwsQvMm3CQhm84
 5xHjHuZgGbJZNOpLs1jbyBx7V0cOpafaZTfDeLhfBmnofJwWGv6Yw1Mz+VzZXOW9
 KcwWvYGiYUA=
 =d4mQ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs.

  The realview_smp_defconfig and realview_defconfig got merged into one,
  so we are now down to 110 files.

  For stm32, we have now added a Kconfig fragment, the first such file
  on arch/arm.  The purpose here is to have a shared defconfig file that
  works for all boards, while the DRAM offset has to be hardwired on
  NOMMU machines at compile time.

  The Exynos defconfig changes depend on changes in the RTC tree, so
  this is pulled in here, but has already been merged into 4.6 now"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: imx_v4_v5_defconfig: Enable initramfs support
  ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
  ARM: multi_v7_defconfig: Enable LP872x regulator support
  ARM: omap2plus_defconfig: Enable LP872x regulator support
  ARM: mxs_defconfig: Enable initramfs support
  ARM: mxs_defconfig: Cleanup mxs_defconfig
  ARM: multi_v5_defconfig: Enable initramfs support
  ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig
  ARM: multi_v7_defconfig: enable useful configurations for Vybrid
  ARM: multi_v7_defconfig: add MACH_ARTPEC6
  ARM: omap2plus_defconfig: Enable AT24 eeprom
  ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
  ARM: omap2plus_defconfig: Enable ISP support and dependencies
  ARM: omap2plus_defconfig: Enable OMAP IOMMU support
  ARM: socfpga_defconfig: enable support for initramfs/initrd support
  ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
  ARM: multi_v7_defconfig: Enable BCM283x
  ARM: bcm2835_defconfig: Enable RPi power domain driver
  ARM: bcm2835_defconfig: Enable RPi firmware driver
  ARM: bcm2835_defconfig: enable ARMv7 support
  ...
2016-03-20 15:32:14 -07:00
Linus Torvalds 8c6d4082fc ARM: SoC 64-bit changes for v4.6
Here's our branch of ARM64 contents for this merge window, now
 containing all ARM64 changes other than device tree files.
 
 - Various new platforms get added
   - Allwinner A64 SoC
   - Annapurna Labs Alpine SoCs
   - Broadcom Vulcan
   - Marvell Armada 3700 SoCs
   - Amlogic S905
 
 - Various defconfig changes to enable platform specific drivers
 
 This branch includes the clk git tree to resolve a build-time
 dependency.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu67KmCrR//JCVInAQKo+xAAnyjdtGviIade2NX+8dpkBvFVkaZMJVK6
 l4DEhM/zYLYToAaP8NHBq14NmcM0dVUF58yop5FG2oJyoJSnFYdeaSYgJG3P+pO9
 gza5Hh5FKy/yjbsO589d0rzJrK9dTYI9xAViSNei9JU6nKdQD7PIwP3DnzSMKIzW
 sekOJArAT9r2L51XlbBd0oo1GGGvH9tQW2ImBs7l5RXnuXxcudIlwpBwSNRg1b9C
 89V3vPdUse6j6jemxk4ZVZud7z9HqDGqBxUx1TC+tA0dWxIymMpQneLqM+/CNgdC
 fmhg1sYKsOMxHSiJc4zYpmjDU6miaq1c+/wQMbOoOR6hdKGZupd4cclepzNswc/M
 wukuxrcMwdXRaSSvPGrefKWGA6OppFl3rbporhoOG0QUaOHzm63Acjppq3/hxx5h
 Ffawp/wO8AmKEQDmA6bj/RecoWJ1Z3aEs3AWThqKyJ2I5gvRdO6OkziTVl3S4x9v
 tPL+pe/i7NuHw0rviYGYuE/n8LS48a7cGoRkdkDVHHGi+A/ArfoqVbY0HG3YiIy3
 xMebvSSAxUjlNtO2AOrLjKAHr15ieuJggny5N8LlfdKx08RF15wd2eaom0yr8Vc/
 mqXTw4wX2KuuYCW3GatJwqYu5Av8wuY1Ma1pYIpEUgq4nY4OId0izSjn0oVlivYx
 /po9snlvFpc=
 =fO+Q
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC 64-bit changes from Arnd Bergmann:
 "Here's our branch of ARM64 contents for this merge window, now
  containing all ARM64 changes other than device tree files.

   - Various new platforms get added:
      * Allwinner A64 SoC
      * Annapurna Labs Alpine SoCs
      * Broadcom Vulcan
      * Marvell Armada 3700 SoCs
      * Amlogic S905

   - Various defconfig changes to enable platform specific drivers

  This branch includes the clk git tree to resolve a build-time
  dependency"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
  arm64: defconfig: Add Qualcomm sdhci and restart functionality
  ARM64: Enable Amlogic Meson GXBaby platform
  arm64: defconfig: Enable Samsung MFD and related configs
  arm64: alpine: select the Alpine MSI controller driver
  arm64: defconfig: enable the Alpine family
  arm64: add Alpine SoC family
  arm64: defconfig: Enable exynos thermal config
  arm64: add defconfig options for Allwinner SoCs
  arm64: defconfig: Enable DesignWare APB GPIO controller
  arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
  arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
  clk: samsung: Don't build ARMv8 clock drivers on ARMv7
  MAINTAINERS: Add entry for Broadcom Vulcan SoC
  arm64: cputype info for Broadcom Vulcan
  arm64: Broadcom Vulcan support
  arm64: defconfig: Add Broadcom Vulcan to defconfig
  arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
  Documentation: arm: add Marvell Armada 7K and 8K families
  Documentation: arm: add link to Armada 38x Functional Spec
  ...
2016-03-20 15:08:45 -07:00
Linus Torvalds 33b3d2e88c ARM: SoC platform updates for v4.6
Newly added support for additional SoCs:
 
 - Axis Artpec-6 SoC family
 - Allwinner A83T SoC
 - Mediatek MT7623
 - NXP i.MX6QP SoC
 - ST Microelectronics stm32f469 microcontroller
 
 New features:
 - SMP support for Mediatek mt2701
 - Big-endian support for NXP i.MX
 - DaVinci now uses the new DMA engine dma_slave_map
 - OMAP now uses the new DMA engine dma_slave_map
 - earlyprintk support for palmchip uart on mach-tango
 - delay timer support for orion
 
 Other:
 - Exynos PMU driver moved out to drivers/soc/
 - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu68DGCrR//JCVInAQIHVQ//Wblms+NKj3aKh6m2Sscs/YkSbFaQ4sY2
 rNyfxLIYsLXkth1kbdHRFSMyL68Ym+xutErgw/3HQPB2D1YtYJE3VJ/y8AU92SU3
 oHyQIty+atB8d8zBbtlkWmat94NIfYf0I8PQETreGb1LMaJqAf0mDEDAyorTLZcZ
 UtQ817Ihn7urqwdTJpTO58V41RmY/vflbHI5T6bIjUJn6fF1e/7+VqtMIfq5sjJ6
 0EPEQdu8s5AJ7gcGlGi9I5gAtSnWSA/9phAxul9P8/HrMpUWIxreSEAy8FY7W14F
 4TON3sQrnw7nyA72U80KGIXhgLy7SbEmHcSqyy4YJK3ycdk6VYk0CBO7nWVYAiD1
 knLisOH6jwe0LIj9WXiRR+Y2Q53pXN8SF77pLDahSnvuShnYEjEH5uELHtxe7Vxh
 gn+NH1rDkRTgdYgt4RWlVyUoLkddQWzLb1m4QyQlvxtTR25cJJayXdVX2MRrNPF5
 c1zRa9HH+b8LJQIMdWfo/NoHhHtftkkGGsqHAAaypZqdpyk0j2HpJYk5ecPR4f5C
 /8o/h/5xOI9gEzp/DVYSZ1VAvRqBQGIDfKBXWq6GuoZaF0aN8ISe5IxFn5Yx2F46
 fNaxqiNpWmyywl8D+tSWPFK6aE21AXKGi5zIzexZZqy283aDjlUPI+tgF2GKIuKP
 3ayYTDeBpLI=
 =ynNj
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...
2016-03-20 14:57:08 -07:00
Linus Torvalds dae0b74eb7 ARM: SoC non-urgent fixes for v4.6
As usual, we queue up a few fixes that don't seem urgent enough to go in
 through -rc.
 
  - a number of randconfig warning fixes from Arnd
  - various small fixes for OMAP
  - one somewhat larger patch to restore the OMAP3 cpuidle
    tuning that was lost in a cleanup
  - a small regression fix for cns3xxx PCI
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu67XGCrR//JCVInAQK8mBAAjW3INXnuQ84Zvb5RLJS+1aiEEgnuOEwM
 Yvxr+MzSMsXS5V9FMGaUk/bXxfGMFILAQ5j471ZanGZkDZwAiJ2tdwreKlyYMHU3
 9PPWtHKYR6BhIRFYovftVpDkbgw3cwdfyIvves7Aa4XyeGNCQjryNQndZci8IZlN
 5I4ff3ea8ZKsDQ1jDXmYw6QENCZl9M4yatLnaOcfdgCRro5VRvdavqIofk+ynv2S
 McUm5WGr/BKiT92MThWIhIskuMNZiUmm7L3zgOYE2+zUgw6tFvreQvAY+qtxk6qt
 0K4SIV04JGevBHl2CENGF1Kctq5z+n/Jcywd9yJBqYxvWMYgnJokczjkxKTyf9X8
 8eU9LEtJsrAzJYw6TXvyjK0EphTJTwg1kO/wk4/HFIM2B+AzGgcbotakIDokrR/i
 I2rgnCqExQZqdUzhgFHg28a0Bx9y2Giu6wCCkwRZKpKW74d5E6esAsTbvggmXvbN
 35G0MSLTeeZDbvN6xLOMZc7qCfyWlO9huxiHPn0Q9eth8RcqfywB4vbNdEli/P4o
 NW+up5wTo6Ifc9Jgf8z7LB9b56i/9LMkSBh/OdCKfHEZlHi5/dZ/TR21CngtpcX1
 hi91vJLH0axCylBVE599qxJYoWjoR8nHz7kD6G4vqXtiTfVcxozUM5NKSD8AXn+Q
 NhYT2BTUh0o=
 =YJmM
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - a number of randconfig warning fixes from Arnd
   - various small fixes for OMAP
   - one somewhat larger patch to restore the OMAP3 cpuidle tuning that
     was lost in a cleanup
   - a small regression fix for cns3xxx PCI"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  CNS3xxx: Fix PCI cns3xxx_write_config()
  MAINTAINERS: unify email addrs for Kevin Hilman
  CNS3xxx: remove unused *_VIRT definitions
  ARM: OMAP2+: Fix hwmod clock for l4_ls
  soc: TI knav_qmss: fix dma_addr_t printing
  ARM: prima2: always enable reset controller
  ARM: socfpga: hide unused functions
  ARM: ux500: fix ureachable iounmap()
  ARM: ks8695: fix __initdata annotation
  ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
  ARM: mv78xx0: avoid unused function warning
  ARM: orion: only select I2C_BOARDINFO when using I2C
  ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
  ARM: OMAP3: Add cpuidle parameters table for omap3430
  ARM: davinci: make I2C support optional
  ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
  ARM: davinci: avoid unused mityomapl138_pn_info variable
  ARM: davinci: limit DT support to DA850
  ARM: DRA7: hwmod: Add reset data for PCIe
  ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
  ...
2016-03-20 14:26:57 -07:00
Linus Torvalds 1200b6809d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...
2016-03-19 10:05:34 -07:00
Linus Torvalds bb7aeae3d6 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
  fixes scattered across the subsystem.

  IMA now requires signed policy, and that policy is also now measured
  and appraised"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
  X.509: Make algo identifiers text instead of enum
  akcipher: Move the RSA DER encoding check to the crypto layer
  crypto: Add hash param to pkcs1pad
  sign-file: fix build with CMS support disabled
  MAINTAINERS: update tpmdd urls
  MODSIGN: linux/string.h should be #included to get memcpy()
  certs: Fix misaligned data in extra certificate list
  X.509: Handle midnight alternative notation in GeneralizedTime
  X.509: Support leap seconds
  Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
  X.509: Fix leap year handling again
  PKCS#7: fix unitialized boolean 'want'
  firmware: change kernel read fail to dev_dbg()
  KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
  KEYS: Reserve an extra certificate symbol for inserting without recompiling
  modsign: hide openssl output in silent builds
  tpm_tis: fix build warning with tpm_tis_resume
  ima: require signed IMA policy
  ima: measure and appraise the IMA policy itself
  ima: load policy using path
  ...
2016-03-17 11:33:45 -07:00
Andrew Lunn ca3dfa51e6 dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistent
All the drivers support multiple chips, but mv88e6123_61_65 is the
only one that reflects this in its naming. Change it to be consistent
with the other drivers.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:43:10 -04:00
Arnd Bergmann fa54ae137a Highlights:
-----------
  - Enable GPIO led driver in stm32_defconfig
  - Introduce a config fragment to override RAM base address
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW1rV2AAoJEMo4jShGhw+JXIgP/iTq3X5thCRCnhj9gyVlaZAC
 Iv+HE+ZaFmpwDnzHfmtrDVnKhHMc3SFqNcCuD+FFLdfZoqB+Qi/RfK+DHqbFIfwY
 COa41koW1pRgjqHTzPmJqVxB2wiETvWOE6KUjZrfT3EUGdvghiy9EAnyN0RppbIp
 CNivabvnqKEiVk9rqtbx6veWBw0aQyg2oL0d8ypPsGP8u87FmIqWpDK0vw8c2JyV
 MuCEt/sDBMtWNr89ylJqAIUiRlm/pFhQY32BxlkfYfqjz1xBac/5BihhK1cP2cZW
 FtDV4Y3IF4Lm+c41EXazYbiduY7OMkKb5XVUGsjFfZKNxTTQbzOvahgpW7cImFPE
 kMzdV8mVD0g0eQumXNeg2wSJgfjxx6kxGWwxUVaFAL82FizuRyDLruDnBmfkQ92P
 uVnFH6wIs9oiBNmVaBibMun61aexLVjzJqPepI+Ray9tJInwz5QsK+oRUe8hXyAJ
 QmExU49z/dY49NYGIyTqE0wQx26gjmyYUqFnUEktsXMkKzuwU99SxUwxhUhgr48H
 agr1fpj4g1gBHQdoHPPvCfb1Jp60Hnl0iSmr5Yv5ay5n1xs+r2IOzenZaY0UaTiy
 alJLf7yHSyNwmPgxgpO0+Z/Yc3faQgTu5q1FatDxTmD3rDjDd0JMhv75O9+Z/k6e
 AGBkwtGMi1040O3LpvMI
 =dBNt
 -----END PGP SIGNATURE-----

Merge tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/defconfig

Merge "STM32 defconfig updates for v4.6 #1" from Maxime Coquelin:

Highlights:
-----------
 - Enable GPIO led driver in stm32_defconfig
 - Introduce a config fragment to override RAM base address

* tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
  ARM: configs: Add new config fragment to change RAM start point
  ARM: config: Enable GPIO Led driver in stm32_defconfig
2016-03-02 23:20:32 +01:00
Arnd Bergmann 4a6f791c35 Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:
 
 - Enable IOMMU and omap3isp so we can enable TVP5150/1 video
   decoder
 
 - Enable at24 eeprom for revision detection on beagle-x15
 
 - Enable LP872x regulator for both omap2plus_defconfig and
   multi_v7_defconfig as it's needed at least by LG Optimus
   Black
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW1hwfAAoJEBvUPslcq6Vz9UwQAKKtMT4EsO+oBFYNtwippBF0
 o2RhThB0Pwve48H+sQOvdeDz0FAisAYd9kecG033QMLEYrASneXaM0AYkeDIjJCE
 5SzwLtNumwhhYbeoQNCIcC+V/rDAplD4KR1WSteeWBPwHweGK3cWfczWN8FRmNqk
 iPfDqSb70C8bUpQeHhGc2xRGthVDKpZeeO9gsfAYOBJGHkMfe2bjyaGRUynoN/Az
 UyBOmr2gmw+YQTknYtsdHnxXBLlhUz6bDKsoB0wXtP4BSrAeenf+Tm7jmWiDZbeG
 wSNmnp7DM/l5kBb8M8BJRfNDpk44ro+OkUYXGUoBmP0Mw3OFeqhXBlj3gugtQR7j
 xQ9BJ4wcWwvxP1rukeqTpwobsMydenJCrw57I7iW+bLn5D6YMx/TJIITeq895tcg
 6xCGlY++78W20NkGtctQMtqpt9zV/HTxQRkJIPzfSd3b9mfWTLimK+DYKwGxgym+
 LgoCQwPJrZAZzvE3/nkyhx0kTEPbyRbCvT33xBRerPIYgGRq+DSZFmsLyFW1OKdT
 VT1uOHuChqertqTUONdW6d6QQuwo6PheOmFz7Z3fJbizu5Uuim+YgkxxKBL+5kKg
 VKJuEfAs2CqS506yCxtGG/eTrmxWHXkSXu75H1yXPVcnn38vjwH9wqiorcKOO9Em
 FNN5I14TW4Lt+DqkNpx8
 =JVC1
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Merge "omap defconfig changes for v4.6 merge window" from Tony Lindgren:

Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:

- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
  decoder

- Enable at24 eeprom for revision detection on beagle-x15

- Enable LP872x regulator for both omap2plus_defconfig and
  multi_v7_defconfig as it's needed at least by LG Optimus
  Black

* tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable LP872x regulator support
  ARM: omap2plus_defconfig: Enable LP872x regulator support
  ARM: omap2plus_defconfig: Enable AT24 eeprom
  ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
  ARM: omap2plus_defconfig: Enable ISP support and dependencies
  ARM: omap2plus_defconfig: Enable OMAP IOMMU support
2016-03-02 23:19:17 +01:00
Arnd Bergmann 620a60075b The i.MX defconfig update for 4.6:
- Enable i.MX25 Touchscreen controller and ADC support
 - Enable NVMEM OCOTP driver support
 - Clean up mxs_defconfig and imx_v4_v5_defconfig
 - Enable initramfs support
 - Enable PSCI, SAHARA and more Vybrid driver support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW1aoYAAoJEFBXWFqHsHzODS8IAJv1Xe6RKzfv7jjbuM3njMtB
 keuMW9eGHCeDu5e9G4j+zb25StQM0pEzFSJmq9zKVp7vxY643dN3L7vw/otkokGW
 7EH6maDQHwuwCWKR0/p5h0kzV59AK7RiEvrcRwhWzbOjrze3R1VDaNFTs1qhqD/p
 mczXTJu7V6GRwKJcW20atDSzbIOUwBO5NSdvUuaglL6FOqLNPYJ3ZfTNmEL5YkNu
 S+pl5p2K6fT8We+cG49EttM134QRNmX/N39GIa+1WKsSabLP9BdBJVBFiEOuqTUq
 rIUfD5SMj91czOsPbj2xQWvw6pDfxf1QUjl024QY8GEI3isk+s0+S0Gv6b+XZgI=
 =QRK1
 -----END PGP SIGNATURE-----

Merge tag 'imx-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

Merge "i.MX defconfig update for 4.6" from Shawn Guo:

- Enable i.MX25 Touchscreen controller and ADC support
- Enable NVMEM OCOTP driver support
- Clean up mxs_defconfig and imx_v4_v5_defconfig
- Enable initramfs support
- Enable PSCI, SAHARA and more Vybrid driver support

* tag 'imx-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: Enable initramfs support
  ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
  ARM: mxs_defconfig: Enable initramfs support
  ARM: mxs_defconfig: Cleanup mxs_defconfig
  ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid
  ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARA
  ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.
  ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP
  ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP
  ARM: imx_v6_v7_defconfig: enable psci default
2016-03-02 23:18:02 +01:00
Arnd Bergmann c88f7e6a52 ARM64 defconfig changes for Exynos based boards for v4.6:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
 2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW1VxBAAoJEME3ZuaGi4PXz/wP/1/mAzScizlcdGi7k1DmP7fZ
 9rsAiXYjIjxcI96L0qrEBCZFDdSwBv/pCRTuCg94FClFYBuW+IZmkTeWPHvtsB5O
 my4Xk3O5WEQbpFPUTZwl8yTlRSwlRdob7lGBFWuapqiCcws6l5xRffG1n6itqN32
 RTzLfeSAAj9zg94EX8UaNYcW9T0aIR/QGOIRXfziorACj5FdSiNvnXNwZBPj39ti
 X47h3BuLjCio0LPPSwNf4Z7XqenOX8z77Y8WTOi0WaRcnirdyjlOFTCLMCYvWIVw
 oih2xofdkDH+QsPOY1Qj96C6I1cUhqC3Z+fvz0PiPfk4Lit7hts+tdZ/8HBdX4V2
 tLodKxL7QowlrwbcRWn7i/MujiOTv6H0+OlJWucrOSFwmYqce8kNdyI/DIp5wNyS
 5NpfLX47SzL8sF4KnxdS8dvYrIT+mJUfuNAexNE44orwrm9AHbmTMNs1ZrGJd4Y7
 wlHg/q0m2lwhG8hvVUiDUwTwkljP1Z94zjJSGK0JMIlBwVbCEKNmBEJZv54RseMV
 47xDisM6RY1SWWx497vXaPcP42AivQn9a/rPJoaeEIsxJgQDTeHmbiCSWJYe43QD
 blKjwBb35QORnkc6tkBDOREFahF0uWVYS+7NOHcbDih2efb65rHAURzrnJIUBXTZ
 QR9mA4PxcR54BFs9RznS
 =T9z9
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64

Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:

1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.

* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: defconfig: Enable Samsung MFD and related configs
  arm64: defconfig: Enable exynos thermal config
  ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
  ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
  rtc: max77686: Cleanup and reduce dmesg output
  rtc: Remove Maxim 77802 driver
  rtc: max77686: Properly handle regmap_irq_get_virq() error code
  rtc: max77686: Fix unsupported year message
  rtc: max77686: Add max77802 support
  rtc: max77686: Add an indirection level to access RTC registers
  rtc: max77686: Use a driver data struct instead hard-coded values
  rtc: max77686: Use usleep_range() instead of msleep()
  rtc: max77686: Use ARRAY_SIZE() instead of current array length
  rtc: max77686: Fix max77686_rtc_read_alarm() return value
  ARM: exynos_defconfig: Enable s5p-secss driver
  ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-02 23:15:48 +01:00
Jan Luebbe c73a1f13d0 ARM: imx_v4_v5_defconfig: Enable initramfs support
This makes it possible to automatically boot-test this defconfig with
kernelci.org.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-01 21:32:51 +08:00
Jan Luebbe 7763327dd2 ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
Regenerate imx_v4_v5_defconfig by running:
make imx_v4_v5_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/imx_v4_v5_defconfig

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-01 21:32:46 +08:00
Arnd Bergmann 1c277cae14 This is the pxa changes for v4.6 cycle.
This is a minor cycle with :
  - cleanup fixes from Arnd, mainly build oriented and sparse type ones
  - dma fixes for requestors above 32 (impacting mainly camera driver)
  - some minor cleanup on pxa3xx device-tree side
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW0Y3SAAoJEAP2et0duMsSfesQAIGKccj/WRWtlCxje+8Aj3UW
 eu6vV9xGVBZu0RJxCchwCBP5ZO8WSvXBYvX5MIaBH2TFdJqJEjie6ES4mRlGVuup
 XMUZybcFOu9N5j0WMddj2OHhEeYGgMsSZwSOgK4nsQ/eyhrcI5fjykdafmPKywjW
 +/USV90ucVp+38C+yg4yXSuI8FOEABIn6VoX//+YpDZetvIoJCUQne1g+uPE2YoF
 dcPqVbY2OeAvuABkI3Wqdrc3Ico9i8Ns8erg8EuDe5xv2TvJXhn/mIeoVNZ2s4So
 5aCD87RQu3rwDfqAv6FzW06k9AYAE/p/VKh0smI12D8MCxhSD0EZP+jBfDvuwx/n
 IICMH7YuunRSRe7VDFgWyIz7wduHQu3xctF9scSYZD+kBpvAD274sZs9WYs4fGd6
 hXxxV4iXrP8af6A+sddDeo0Gq25jC7JoL43YlQTUzBMqbrzK4W3c0dXCib6hh/eN
 W/YVdPERGs9cTG/IZFbn3cn1QIYdA4exNoE38txWkKpeiVxu0tZKSsg6m9xCPu7+
 vMQj1m8E8mkgiMq0BJnei02QC8Xw5ekf4wNUsLOOou29c7CTt3zicM8YtnDmANV2
 fIIT4BK0izIZj4N0RZp9KT6h/IkF1VHRz3pcw3vYXJLbaKqHk/6doDUW30E/Ol1f
 PzJedKaWujhOV1DG1SLb
 =lBYC
 -----END PGP SIGNATURE-----

Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc

Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:

This is a minor cycle with :
 - cleanup fixes from Arnd, mainly build oriented and sparse type ones
 - dma fixes for requestors above 32 (impacting mainly camera driver)
 - some minor cleanup on pxa3xx device-tree side

* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: pxa: pxa3xx device-tree support cleanup
  ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
  ARM: pxa: fix building without IWMMXT
  ARM: pxa: move extern declarations to pm.h
  ARM: pxa: always select one of the two CPU types
  ARM: pxa: don't select GPIO_SYSFS for MIOA701
  ARM: pxa: mark unused eseries code as __maybe_unused
  ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
  ARM: pxa: define clock registers as __iomem
2016-03-01 00:24:43 +01:00
Arnd Bergmann 68d61aed7d Allwinner defconfig changes for 4.6
A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
 most notably the USB OTG that is finally enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW0J8dAAoJEBx+YmzsjxAgqlMP/1a2IaPeM5bYb/Enu2Creqod
 +mc03J1xYBVTLqXnELX6j7ydxVa0ZknQlbMQV7FiQ6icdaS+KwK6vx7kGTogEXtr
 ZxwNsTlW/n948ewr6snZlkXzdPORp2t6UKfgjJwo2UtITcPTBTUxItUZpssqNZ8B
 T79S0v1YJkdHb5ulcii8SzgwyE8Gs55KnCddbCE3h59sqb0mNEOz7sdOg94JlR9Q
 nM+JtoKPSiG9yHUaC+/Rpad02Ahr0735acD58nSUIteNHMdqAqFB7UKGkYp5NoT0
 B1A9+5nSysDi/kynP7luHhBwNGieXfN+1z6Kfl1nl2kvJAOSDZM32b0pLMZ9FaXq
 Oo2kykr5OLwNiZdPWpuU80a8lfH9zyVK61wJdnxn7Fdwy7fToHMgXdEZxDXnTI6K
 FZHab6diaKb+Ob+ke14ZVqNZL6bLc0Ffjbha5jWpxOsroFNHMjzmY8Wn2x74BEDv
 X7e8jxkyzUPy3MrIQ5NuT7fIhmj6NurBpcJ9+6URBUbkXpJ7zK50H1eyLiJh+6yk
 uRIVYq0unLF27zcn/zrnePSLQkq6/pfdT3DS7qNZaAXnx0y8+Ij7UjvM+65BIe9s
 uW+NnkGBchRbWFGXxvkLldFrUEsQrouSqdpEgGmOVub2evlnwnEVqeyJ3ar1QC4B
 Odw0PD0tB9xYI/YQ/flR
 =6Cse
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Merge "Allwinner defconfig changes for 4.6" from Maxime Ripard:

A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.

* tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue
  ARM: multi_v7_defconfig: Enable A10 audio codec driver as module
  ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue
  ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used
  ARM: sunxi_defconfig: Enable A10 audio codec driver
  ARM: sunxi_defconfig: Enable sunxi IR driver
2016-03-01 00:13:44 +01:00
Arnd Bergmann 4043d9c379 mvebu defconfig for 4.6 (part 2)
enable SRAM support in mvebu_v7_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlbQXRoACgkQCwYYjhRyO9XuDwCggDihNDvg28PdaATDslAWggt0
 uJoAoIZioUyUwXZ2a0artKxtvxgBXme0
 =+WFN
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu into next/defconfig

Merge "mvebu defconfig for 4.6 (part 2)" from Gregory CLEMENT:

enable SRAM support in mvebu_v7_defconfig

* tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable SRAM support in mvebu_v7_defconfig
2016-02-29 23:59:14 +01:00
Paul Kocialkowski 4e550018df ARM: multi_v7_defconfig: Enable LP872x regulator support
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-29 14:58:01 -08:00
Paul Kocialkowski fa4fc8188e ARM: omap2plus_defconfig: Enable LP872x regulator support
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-29 13:53:37 -08:00
Jan Luebbe 4962e48ea0 ARM: mxs_defconfig: Enable initramfs support
This makes it possible to automatically boot-test this defconfig with
kernelci.org.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29 10:44:08 +08:00
Jan Luebbe 72a582e602 ARM: mxs_defconfig: Cleanup mxs_defconfig
Regenerate mxs_defconfig by running:
make mxs_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/mxs_defconfig

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29 10:44:03 +08:00
Arnd Bergmann ba923b5ee6 Merge tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Merge "Broadcom defconfig changes for 4.6" from Florian Fainelli:

This pull request contains defconfig changes for Broadcom ARM-based SoCs:

- Daniel enables all that is required to get the BCM283x (Raspberry Pi and
  Raspberry Pi 2) SoCs to boot with multi_v7_defconfig

- Stefan enables the Raspberry Pi firmware driver and power domain drivers
  in bcm2835_defconfig

- Stephen refreshes the bcm2835_defconfig, disables DEBUG_LL, and turns on
  ARMv7 support which is needed for BCM2836 (Raspberry Pi 2)

* tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Enable BCM283x
  ARM: bcm2835_defconfig: Enable RPi power domain driver
  ARM: bcm2835_defconfig: Enable RPi firmware driver
  ARM: bcm2835_defconfig: enable ARMv7 support
  ARM: bcm2835_defconfig: disable DEBUG_LL
  ARM: bcm2835_defconfig: rebuild on next-20160205
2016-02-26 23:34:17 +01:00
Jan Luebbe bd3d4f5385 ARM: multi_v5_defconfig: Enable initramfs support
This makes it possible to automatically boot-test this defconfig with
kernelci.org.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26 22:44:52 +01:00
Jan Luebbe c0ea07f402 ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig
Regenerate multi_v5_defconfig by running:
make multi_v5_defconfig
make savedefconfig
mv defconfig arch/arm/configs/multi_v5_defconfig

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26 22:44:45 +01:00
Stefan Agner 4736af6782 ARM: multi_v7_defconfig: enable useful configurations for Vybrid
Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller (and Chipidea Gadget support)
- Built-in EDMA DMA driver (to be available at LPUART probe)
- Vybrid ADC driver
- IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid)

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26 17:18:57 +01:00
Olof Johansson 82767de15a SoCFPGA defconfig update for v4.6
-Enable initrd/initramfs support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWxub8AAoJEBmUBAuBoyj00JwP/j8MN1EN1QIYRD4XdaMomxTP
 w0HdOtlCLIJLkEmDoHcSvDpgK8wnq6u+s1e43ZwopS/poD2biN6Te6ySYibPKBie
 zrCVvRbiqUzZiw0ueMJA8udOHTuwys3L6rN8bG3VV5+xHizUdZHSB0/b2oxIXxba
 TIRg+0JULjXHQphIPSBhTX/6dN4lx8s6gAJAQeLL329zSMo6rdmudjVTVykMzXod
 DdOaC3osmBa5ZwZY7Tr7KIBwUZThimEqgeBravr2y/TSPRwBDSFEP6el967qe+t/
 omHtWxXPxEsYCagcgaM4gXw7MFK4Ons6oS4SDef3t1W5Ta0nOUlt8nBSY/oI5zY1
 nxwICZkjLiN1hCWU6KWuGcKeIL97A1QIh1rzNxI9Sro44dcGzST4g5w6q5bcX66z
 jrzBiQtBG96qXStc02Zy+9Qljxc43fwBL70XlVKRmlanQg2CVUI0BFzjSsjYSksQ
 hKfHrwU475jCaBdBGDuxQzafYlvFhkogUbsu7o5TJ/s2bWl4j++gerL/MigL2uzS
 Bt4vNYpxntkeSYeN9iIiL9UB/K4mqJv9+fSVYZQ4Htf4uQqIqeNxgHd5K5aQ1jt2
 lCtjRdbjfR1bTcbxB3Vc+HZVH06hk9beUaPa6ZQ2h5Tqi/2eizCYDmnASw6i51YR
 ofceQAAg+bGeGz2eUeTA
 =sOpf
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig

SoCFPGA defconfig update for v4.6
-Enable initrd/initramfs support

* tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: enable support for initramfs/initrd support

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 17:23:54 -08:00
Olof Johansson 1a2a8de690 defconfig update for 4.6:
- Addition of sama5d2 ADC to sama5_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJWxSM+AAoJEKbNnwlvZCyzk+0QAINwcLZxwssiMGWftriC/jSq
 H1uHmL6i3+UveUpT65senATRfSgZLfWVWCsnWphJOW0kLPQT048ForLHXhipzs+Z
 6ckvXQ4h9xF0aBFAGCMc3kbFhpNlg8TFiuCpxbkjhJJ4Kajk2p0moDd51pn10vLf
 x5xbz9h3XLkKShUlNWwOqAxEtXdIJRPM9sQ1/nFI497G0EAskk/G+IE/TOIX8WVM
 973bKOxJwz5ueQVSmcM3oTDdZF6gPSihjtlL9bqbfLmeW3CVoa828Y0JtGSc+ajv
 ++JvZDQCw654N0AgFqQICxXnGc2Nkt6j4EVdu8G3YY3xf9iy9C6iw9HZMGBjeumz
 bqrUyOtKVz10NBcvjG/nVyE+uZXXBOOWtby7JK48TGfYrJwFRirFEb3605HcEWwJ
 FRMhh1ztMGadMK4WxjLdbO2PnOoWI2z96CLY10mTV8Z1N4vV1yvUvQIfDmjqPSkU
 u2qn3eAwsOzACaGej4RKGDiCk8HolxgWr5xtHT71YRxchhOpUKmT2nDxxo7E9YLn
 xo4P46JvqKwuMIyKLlxe6gAGaI3j5avRvYywKDWEtWwUI2hhFXUCOzZMg/DCGv3v
 JZAhRGaD1hiNFX6TZkDPNwOnr7IUBDNQ8lG4JjUzqujmvEES7f0sUOGCWFqZ+xHv
 vg0wHnKd54y4kC2cI6vE
 =8vI6
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

defconfig update for 4.6:
 - Addition of sama5d2 ADC to sama5_defconfig

* tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 16:56:20 -08:00
Olof Johansson 7f544a5109 Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6:
1. exynos defconfig:
    a. Enable NEON and accelerated crypto,
    b. Enable s5p-secss driver (Security SubSystem block for accelerating
       some cryptographic operations),
 2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
    was combined into existing rtc-max77686 driver. This depends on changes
    from RTC tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWwRlWAAoJEME3ZuaGi4PXngMP/3Xp+doDPiz+hTj8IIovy58u
 9XMBIdT4A8dklpVGUC6m6JQOGgM8M/5r/SNwZkOpmIo/8uZYZhbe8vpz5/k2XRwr
 6JT6dZ8KU01TKzggsjOnJzFvKkSRnW7eMl1zG+qSlLodOoEdXjQq2rihTeWlKtAw
 6KBZCmzaqswATS5ZVrcy56w8q3Gdw6HSs2k1GUwEtgM3FCBlf8S9OhVmgHdspYuU
 MjMPSkfgHy8TfDR9YHV/sr8b/qO9vBHBEGW/QxCp/roXOrzeVbXsKB5AXP/mMKMT
 vJcctLAC8TBT/CE3qCwetMwFIM4hEpMpVXpu45HuGCnrdBASmRvn/4wRuuCDb12V
 g71/93lg6R1+t2mtDLVfSxmgMGBW1vK0HFS14CHgmF+mMvH7D3LN7LdC/xBVonwE
 nF+E6HF8nqksHOkdIYbHZGfxeuMvWw5RST6IyNhqeQ/QRlwtSAgwmbx9xjB8hcmE
 WeZkUlwexXmUKp29tcBsN/n5l7m91JJ1KhFReuuB7TX7zJ9cF4hUC8otdQzwTDGd
 qGDQnxjpMp7kYWL0ip+BRrZEICdgNqMAUnkH8q/R3AH0zkodzp+UAA5oNoY2Q7n4
 3UV8jvZnQKtUGx54P+2bYnVbZK6QKcCUt1Uk2SngsToiq7es2sW4kMXZSOmfxrQ6
 WqiiM0lklrISYrzi+KmG
 =SU+0
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6:
1. exynos defconfig:
   a. Enable NEON and accelerated crypto,
   b. Enable s5p-secss driver (Security SubSystem block for accelerating
      some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
   was combined into existing rtc-max77686 driver. This depends on changes
   from RTC tree.

* tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
  ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
  rtc: max77686: Cleanup and reduce dmesg output
  rtc: Remove Maxim 77802 driver
  rtc: max77686: Properly handle regmap_irq_get_virq() error code
  rtc: max77686: Fix unsupported year message
  rtc: max77686: Add max77802 support
  rtc: max77686: Add an indirection level to access RTC registers
  rtc: max77686: Use a driver data struct instead hard-coded values
  rtc: max77686: Use usleep_range() instead of msleep()
  rtc: max77686: Use ARRAY_SIZE() instead of current array length
  rtc: max77686: Fix max77686_rtc_read_alarm() return value
  ARM: exynos_defconfig: Enable s5p-secss driver
  ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 14:33:10 -08:00
Olof Johansson 5dc1104960 Fixes from Arnd for harmless warnings for Exynos and S3C platforms.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWwRT1AAoJEME3ZuaGi4PXidgP/RnaUx1W+wRaNVotyheUBcQE
 KnzrC4DOzXq6Qc+ax/wH3bEbWQF9Qs1TGWe/JYPCiNUZo+Xa5xRMhfJfCNPeYjZp
 +dZz6W4BV1zDCQF2qi3qeprXtJqhvGISo1RnC3VuvDuMfgfyVZEYeWzQcSAQDOSp
 WIa/Z9A9KIWW8rm8eQCVR5SLShKLb+aDAkLtJ3bwPMwDs0I3cYlcXJaIV0Pb+oWR
 31mBUlWxZI7Xi21rpzT0d4HqqhbGvUakLKfCADzJzG+jdVagsppqZ0R7iPkWCNxZ
 TWdMF2tY6+HGs1aVJFVcoU5OEYbeq4q5vd8rq8KVnBJaybNsB2qSw8jgkH16vwBR
 MzCUM85cpNe2MPRao3rDjRHtSrbwTITKZbYl7epCLyDDalrskFpn4ekaoZvGQzDP
 G1oJjSO3AKvEa87kDwiLJngdePMIObTXKPbQIEdqRUD3k/QXSLx9ph0Ox9nHheWR
 1G37yKgvu+eU1hJQQTIc+Xvs8bpM9l0Ll9ghXvb2d1RLj/9oaYwo+RjA6Lr5f/bV
 hrnFezSO3tQIBzdROl9N5gYRcZ81w0RTEBgWbWZIQBGk6H/Bugo3NAgqkSTXOD3e
 7x/WAGmvxZocDZTUS4K2uX5MrKkW/NiWlsmiKyx8Tov04QWt08z5epbCLDH5Tw01
 7r4UlBa8l9r+xRV1zaYo
 =apUL
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes-non-critical-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/fixes-non-critical

Fixes from Arnd for harmless warnings for Exynos and S3C platforms.

* tag 'samsung-fixes-non-critical-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: select THERMAL_OF
  ARM: s3c64xx: mark regulator init data as unused
  ARM: s3c24xx: fix unused gta02_configure_pmu_for_charger warning
  ARM: s3c24xx: allow selecting S3C2440_XTAL_16934400 for s3c2442
  ARM: s3c24xx: don't select EEPROM_AT24

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 14:18:08 -08:00
Lars Persson 39b898a049 ARM: multi_v7_defconfig: add MACH_ARTPEC6
Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 13:57:58 -08:00
Olof Johansson e631847a9b This makes the RealView defconfig select SMP on UP
so we only need one defconfig for RealView, then adds
 USB mass storage configuration.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWubQdAAoJEEEQszewGV1z+/sQAIG5oQTEIcL1hqpvXt45aXWV
 EXDegA0Dn++yCHoxlG0f4UJvzuxwddvwPNGyaYGfSne3dJg25ufIFYwElXdcnhAe
 cbjS2BNOi7iYqv/WNRl+Afk1Aft0exjoQkT/ZVEFYrw6ZawxLneiSDTo5sTyqGBd
 T215nH7oAa1Yo6CPrzLBLlefWtINgzB0FSAoGQPe4dXWa9IIiqftSYjIzkEjVprI
 KYm14QMT7eiZgOzBr22zp+pGCrO3iE+EKbMXbYHCRYjonfpxxiV9BupBBjkBpUPO
 fDm/G7RX+Eu/DfogM3UvbWIgiRMwSPSk2eN65TY/K/+V7Zk577utBSYqmt+Hrobp
 QxqbeAdLk5yrT5LK7o6mgEhGX0Ur4QYAHY73lDOXQKG7ArOYwexyXEeVhgtj4mJh
 xa3nGLcIFeyZJj4J6brxy4JKku9yt/IyeRHimMeH+wPPI2trdVKQuGJjmJdrIwHH
 QWG4Igav+Xvde8y7GgKBP3d74chf5RTs71gTBImvdnFuWZHjTCyWipDSzTBjYGXi
 +PFiE/gAKHjF0wQd+bQzvMcBvVAOPYkOfCmGYGk16rQSpNHH+gcLzO/LxSNiahxn
 5HmR+KpW8fWiGrRdtdHQP2LqLTNHgU2UgNU/1nmm7mQOdfcGTjS7UTHM58A3hxlL
 NceDiHuVmWywr6XqJJTp
 =tRLy
 -----END PGP SIGNATURE-----

Merge tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig

This makes the RealView defconfig select SMP on UP
so we only need one defconfig for RealView, then adds
USB mass storage configuration.

* tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: enable USB storage in the defconfig
  ARM: realview: delete realview-smp_defconfig
  ARM: realview: activate SMP on the default defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24 12:17:50 -08:00
Nishanth Menon 4a64f3222e ARM: omap2plus_defconfig: Enable AT24 eeprom
AT24 compatible eeproms are used in BB family and X15 boards.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:13:28 -08:00
Javier Martinez Canillas b7d6073cad ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3
ISP so enable support for its driver as a module to be able to test it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:11:05 -08:00
Javier Martinez Canillas ea00ab5ba6 ARM: omap2plus_defconfig: Enable ISP support and dependencies
The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate
camera images processing. The ISP driver implements V4L2, Media Controller
and V4L2 sub-dev interfaces so enable support for the driver and all these
dependencies to allow video capture to be tested using this HW IP block.

Also, disable the I2C ancillary drivers auto-select option since the media
driver does not auto-select the ancillary devices that are attached to the
bridge because this depends on what's present in the supported OMAP boards.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:10:27 -08:00
Javier Martinez Canillas 57228f664b ARM: omap2plus_defconfig: Enable OMAP IOMMU support
OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so
enable it to be able to test the OMAP3 Image Signal Processor (ISP).

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 10:10:06 -08:00
Dinh Nguyen 31d74b2bf0 ARM: socfpga_defconfig: enable support for initramfs/initrd support
Enable CONFIG_BLK_DEV_INITRD.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
2016-02-19 03:48:20 -06:00
Ludovic Desroches 48a2e12adb ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17 22:51:48 +01:00
Daniel Stone 0a05d3b71a ARM: multi_v7_defconfig: Enable BCM283x
Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Stefan Wahren aa6c53be57 ARM: bcm2835_defconfig: Enable RPi power domain driver
After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Stefan Wahren da496d1287 ARM: bcm2835_defconfig: Enable RPi firmware driver
This enables the Raspberry Pi driver for GPU specific features.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Stephen Warren e55345e7ee ARM: bcm2835_defconfig: enable ARMv7 support
This makes the RPi2 work; it has an ARMv7 CPU.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Stephen Warren 21fb10be46 ARM: bcm2835_defconfig: disable DEBUG_LL
This way the kernel works on both RPi0/1 and RPi2 even with earlyprintk
in the kernel cmdline; the two hardware platforms use different physical
addresses for peripherals, so the same DEBUG_LL configuration won't work
on both. If someone needs DEBUG_LL support, they can enable it locally.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Stephen Warren 990246906d ARM: bcm2835_defconfig: rebuild on next-20160205
This separates explicit changes desired in later patches from "automatic"
or irrelevant changes caused solely by Kconfig changes.

make ARCH=arm bcm2835_defconfig
make ARCH=arm savedefconfig
mv defconfig arch/arm/configs/bcm2835_defconfig

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-17 11:18:05 -08:00
Lee Jones 9fe5bf92c3 ARM: configs: Add new config fragment to change RAM start point
Rather than duplicate a defconfig for each difference
between platforms, we can choose to pick a basic defconfig and
manipulate it at run-time using config fragments.  Here we're
adding a new fragment to over-ride the RAM start point to 0x0.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2016-02-17 17:31:30 +01:00
Marcin Wojtas 9a571eb6fe ARM: mvebu: enable SRAM support in mvebu_v7_defconfig
SRAM support is needed for the hardware buffer management used by the
mvneta driver.

[gregory.clement@free-electrons.com: add commit log]

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-16 11:42:53 +01:00
Stefan Agner 42ef742460 ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid
Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.

Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.

Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-14 15:50:33 +08:00
Fabio Estevam 30ded61476 ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARA
Select the sahara crypto driver that is used on i.MX53.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-14 15:22:59 +08:00
Denis Carikli 72dbe155f3 ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
2016-02-14 09:56:25 +08:00
Linus Torvalds 14379cdc76 fbdev fixes for v4.5
* fix omap2plus_defconfig to enable omapfb as it was in v4.4
 * ocfb: fix timings for margins
 * s6e8ax0, da8xx-fb: fix compile warnings
 * mmp: fix build failure caused by bad printk parameters
 * imxfb: fix clock issue which kept the display off
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWvb3dAAoJEPo9qoy8lh71UREP/39iw5a2pvZtKC4tbeIWGntJ
 +wP0Hp6hCxAVh8S+SsSEF2i2oZzs4/ZYgRFoGGKK3j2CcizRxG9WMvaqbb3C8s4r
 3aoj02oDyw/kpui+0O+eSUpLvc75c1nrVh31SrLK5zhx0fg59UEJZYlO/VkLTKTJ
 mN22y0VUtffx61plAs/e9EU3x6+Y3UEhDd6nuxJ+J5e9ruzjNDE5IVzyPjpP+kvA
 2ry/cjvmDKTqw2jJGYJ7CbBuAtCXz7BgT5XXKAeNLPFqewF5CN2Jck2k9Ix7M1Tv
 rAcLLEl9vrUIO5Ss3BI0VK4IXa0CYPQkPxsdVFvf26QaDXDGTdOkOAkZGMAi6jXZ
 SulDABha5VThbJUQSskBUoMF6f2l2A3MX6Gr5cNJazPagMBYCNG++HoLA17cEnH9
 a3+ujaGgdhBJqCYrJ7Wjif1wL77eHvby4xYdxdyssTVbd3MWcRqK1Nws8YBn4bw9
 jE8TOy4RAYqA/LA7QjXCel4sI6cbYejJfz1/mH31MgjWC96tRBr0NhkT7W5zQvll
 toycESYP6STwKTDfuntfo0PUwMOOxhZwVzSQD5Ov2cQvl3eEKWR1WRZLIOwWtz5/
 L4HkpCAQzIPNDOpnV7nS/jdTwwoV3bKjYluHHIeByvLrFaOQuKy/zO69pj7vUtpU
 2XgQJcu6UHLYDAwDFCuV
 =kfw6
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs
2016-02-12 09:39:34 -08:00
David Howells 50d35015ff KEYS: CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).

The defconfig references were removed with:

	perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
	    `git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`

and the integrity Kconfig fixed by hand.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-10 10:13:27 +00:00
Chen-Yu Tsai 3d0ddadbe6 ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role
controller for USB OTG.

Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode. This requires the
NOP USB transceiver driver, which is also enabled.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 19:30:57 +01:00
Linus Walleij 52abf1eff8 ARM: realview: enable USB storage in the defconfig
It is not uncommon to boot a root filesystem from a USB
pendrive and similar, so enable USB mass storage, backed
by SCSI and SD block devices in the RealView defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09 10:39:38 +01:00
Linus Walleij 7a6f752e27 ARM: realview: delete realview-smp_defconfig
We enabled SMP in the realview_defconfig so delete the
SMP-specific defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09 10:39:30 +01:00
Linus Walleij 89bf707923 ARM: realview: activate SMP on the default defconfig
The realview has two defconfigs: realview_defconfig and
realview-smp_defconfig. We now have working SMP_ON_UP so
make them equal so we can delete the -smp variant. For
some reason NO_HZ_FULL was missing from the plain
realview_defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09 10:39:18 +01:00
Chen-Yu Tsai 0813ce0a49 ARM: multi_v7_defconfig: Enable A10 audio codec driver as module
The A10 audio codec driver supports the on-chip audio codec found on
Allwinner A10, A10s, A13, A20 SoCs.

Build it as a module, since it is not critical.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 09:14:27 +01:00
Chen-Yu Tsai 44c2316314 ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed
dual role controller for USB OTG.

Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode.

This patch only enables the driver core and Allwinner platform support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 09:14:05 +01:00
Chen-Yu Tsai 401d32a995 ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used
sunxi_defconfig already enables INPUT_AXP20X_PEK, but the device is not
exposed to userspace. Enable INPUT_EVDEV so it is.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 09:02:17 +01:00
Chen-Yu Tsai d027595be1 ARM: sunxi_defconfig: Enable A10 audio codec driver
The A10 audio codec driver supports the on-chip audio codec found on
Allwinner A10, A10s, A13, A20 SoCs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 09:01:45 +01:00
Chen-Yu Tsai 2a743e3ece ARM: sunxi_defconfig: Enable sunxi IR driver
A consumer IR receiver is commonly found on Allwinner SoC based
development boards and set top boxes. The driver has been available
for some time. Enable it by default.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 09:01:17 +01:00
Olof Johansson 5eb3846258 mvebu defconfig for 4.6 (part 1)
- Enable sound module needed for OpenRD in mvebu_v5_defconfig
 - Add USB nop xceiv support in mvebu_v7_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAla4pEgACgkQCwYYjhRyO9V5swCdE+ycsxftoA4+3OGHWn4yAOdb
 MukAoI41b7PVQQM3gX1+sBuKe0X/AHTG
 =UEnL
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu into next/defconfig

mvebu defconfig for 4.6 (part 1)

- Enable sound module needed for OpenRD in mvebu_v5_defconfig
- Add USB nop xceiv support in mvebu_v7_defconfig

* tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu_v5_defconfig: Enable sound module needed for OpenRD
  ARM: mvebu: Add USB nop xceiv support in mvebu_v7_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-08 13:59:29 -08:00
Olof Johansson a8824bd6a5 Renesas ARM Based SoC Defconfig Updates for v4.6
* Enable XHCI_RCAR
 * Do not enable CONFIG_CPU_BPREDICT_DISABLE
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWsHsVAAoJENfPZGlqN0++mq0QAKe5C5SQL+BwcTBdktFxaVlG
 JJHjLA/u9EgZ/+cs12zMRe8/fZeuT5/IXy/6gj6bo2KR8tZ/KvwjrfNMBuk5q2Pf
 zB1eypJGGJOYlgxUFa5y5E4VzQKBqoMO9B75L99h4dERreO2RCK8Blh8gFndKNSI
 KskCGJwZ9Fd2afeHPMlsXYiDb44H+iR6eL3u9iv2fcZkBPtTe6oo3wi/BwAvxW1k
 oZhwlosa4HXYpjhnoGllXlRlOO/+z94v5pHqI7Bg8s9Tx68BXmCLXvXorGZqWa+x
 hOIBF0ofd9panjJtHNs1ClITQe4IbHfW/D593q5ijx1bB9hRvkpIT9LKulSymwZX
 QtgmP8Z25Tvfus6rE/VjQaDz4HPy2a8SoYtTG/SjUKPUk+Vf9jTKS6QeHysFTwLo
 6BTzdR9AGY6kBW5YPjIClHWA2IlmGVFL2+JK/g4lRS2OPZh35HI9xgR1PA7cBc6L
 +7XpFmyZ1aP2BpncWj4ewKk9Zvd0TGXAuB2lu+CQvDcbYdN/RasK+jsrK7M+jBHH
 LTk15zRJhnYttzjca7JSVgOA0iOq8InwZBijfOojVCXyMMONYjp4nrdaEEG4FH1l
 gNYfsyg1QYz74fnL7ECg7sQwx4jhvt1CJO4qC9F1djcYKuRKexLCZB6G2j96qsJy
 hR2GQSdS8ou4DLP015kK
 =e/Gj
 -----END PGP SIGNATURE-----

Merge tag 'renesas-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Renesas ARM Based SoC Defconfig Updates for v4.6

* Enable XHCI_RCAR
* Do not enable CONFIG_CPU_BPREDICT_DISABLE

* tag 'renesas-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: Enable XHCI_RCAR
  ARM: shmobile: enable XHCI_RCAR in defconfig
  ARM: shmobile: defconfig: Do not enable CONFIG_CPU_BPREDICT_DISABLE

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-08 13:24:01 -08:00
Javier Martinez Canillas 5d51f1dde2 ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
The driver has been removed so the Kconfig symbol is not valid anymore.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 09:11:32 +09:00
Javier Martinez Canillas 7633f8fb66 ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
The driver has been removed so the Kconfig symbol is not valid anymore.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 09:10:26 +09:00
Dinh Nguyen 381a65c21a ARM: multi_v7_defconfig: enable DW_WATCHDOG
The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog.
Enable CONFIG_DW_WATCHDOG for the driver to get built.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04 13:25:33 -08:00
Fabio Estevam f9e37c683c ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP
Select the mxs ocotp driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 16:13:03 +08:00
Fabio Estevam 007270f136 ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP
Select the i.mx ocotp driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 16:12:20 +08:00
Arnd Bergmann 55e70147e7 ARM: pxa: don't select GPIO_SYSFS for MIOA701
GPIO_SYSFS is a common kernel functionality, not something
that a board specific Kconfig should have to worry about.
In MIOA701, we get a warning about the select when CONFIG_SYSFS
is disabled:

warning: (MACH_MIOA701) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS)

This just removes the select and instead enables the symbol in
the defconfig file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:17 +01:00
Arnd Bergmann bde491fde0 ARM: s3c24xx: don't select EEPROM_AT24
EEPROM_AT24 depends on both I2C and SYSFS. We have in the past
added I2C 'select' statements to avoid build problems with the
first, but we still get a warning because of the second:

warning: (MACH_DAVINCI_EVM && MACH_SFFSDR && MACH_DAVINCI_DM6467_EVM && MACH_DAVINCI_DM365_EVM && MACH_DAVINCI_DA830_EVM && MACH_MITYOMAPL138 && MACH_MINI2440) selects EEPROM_AT24 which has unmet direct dependencies (I2C && SYSFS)

This removes the 'select' statements again, and forces users to
enable the driver in their configuration files, as we do for
most other drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-01 09:42:57 +09:00
Tomi Valkeinen c84f6b8bce ARM: omap2plus_defconfig: update display configs
omapfb and omapdrm were recently made independent of each other, and
this required Kconfig option changes. This patch changes the
omap2plus_defconfig to enable display similarly as before: omapfb and
panel & encoder drivers as modules.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2016-01-29 12:59:37 +02:00
Frank Li da536e276d ARM: imx_v6_v7_defconfig: enable psci default
i.MX7D uboot support psci firmware.
Enabled psci default.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-28 16:27:19 +08:00
Maxime Coquelin be8df3704c ARM: config: Enable GPIO Led driver in stm32_defconfig
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2016-01-27 18:59:03 +01:00
Simon Horman 20cc7dd4d0 ARM: multi_v7_defconfig: Enable XHCI_RCAR
This is used by Renesas R-Car SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-27 18:23:03 +09:00
Simon Horman ae6b99bc69 ARM: shmobile: enable XHCI_RCAR in defconfig
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-27 18:23:03 +09:00
Martin Michlmayr e1995f5586 ARM: mvebu_v5_defconfig: Enable sound module needed for OpenRD
OpenRD-Client requires the CS42L51 codec.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-26 09:40:58 +01:00
Tony Lindgren 7e3b120770 Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
Gregory CLEMENT 6b7958f4bb ARM: mvebu: Add USB nop xceiv support in mvebu_v7_defconfig
The Armada 38x based boards use this "PHY" with their xhci usb
controller. It would be also used for Armada 39x and Armada 375 base
boars which also had xhci controller.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 13:21:00 +01:00
Krzysztof Kozlowski 2c658a7300 ARM: exynos_defconfig: Enable s5p-secss driver
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.

Currently the s5p-secss driver supports AES in CBC and ECB modes.
However on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412) boards this
change introduces one booting error (because of unaligned buffers):

	alg: skcipher: encryption failed on chunk test 1 for ecb-aes-s5p: ret=22

The cbc-aes-s5p properly registers itself and passes self-tests.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-25 15:05:51 +09:00
Krzysztof Kozlowski 8904305a47 ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Enable the kernel NEON mode and asm/NEON accelerated crypto algorithms
which should bring performance benefits on Exynos SoCs. Enable these as
modules because they are optional, not essential anyhow for platform
booting nor related directly to Exynos Soc. All accelerated algorithms
pass booting self-tests on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412).

Additionally enable cpufreq statistics as they are useful for debugging.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-25 15:05:13 +09:00
Geert Uytterhoeven 406663ed61 ARM: shmobile: defconfig: Do not enable CONFIG_CPU_BPREDICT_DISABLE
Do not disable branch prediction, as this has a big performance impact.

After re-enabling branch prediction, __loop_delay() runs 16 (Cortex A15)
or 11 (Cortex A9) times faster than before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:47:11 +09:00
Tony Lindgren 143c6fe3a4 ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can
now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that
DEBUG_RODATA gets selected by default. This way we can make sure
any related issues are caught early.

And while testing things on various devices, I noticed we're
missing few loadable modules to make things more usable:

- USB Ethernet for smsc75xx, we only have smsc97xx right now

- Basic USB serial drivers for things like ftdi and pl2303 ports

- Blinking leds with pca963x

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00