The patch breaks userspace implementations (e.g. fdutils) and introduces
regressions in behaviour. Previously, it was possible to O_NDELAY open a
floppy device with no media inserted or with write protected media without
an error. Some userspace tools use this particular behavior for probing.
It's not the first time when we revert this patch. Previous revert is in
commit f2791e7ead (Revert "floppy: refactor open() flags handling").
This reverts commit 8a0c014cd2.
Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/
Reported-by: Mark Hounschell <markh@compro.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wim Osterholt <wim@djo.tudelft.nl>
Cc: Kurt Garloff <kurt@garloff.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
-----BEGIN PGP SIGNATURE-----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=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
Variable nr_sectors is set to zero but this value is never
read as it is overwritten later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
drivers/block/floppy.c:2333:2: warning: Value stored to 'nr_sectors' is
never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1619774805-121562-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
FLOPPY_SILENT_DCL_CLEAR is not defined anywhere and comes from pre-git
era. Just drop this undef. There is FD_SILENT_DCL_CLEAR which is really
used.
Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20210416083449.72700-6-efremov@linux.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ST0 as 0 index for reply_buffer array. get_fdc_version() is the only
function that uses index 0 directly instead of the ST0 define.
Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20210416083449.72700-3-efremov@linux.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always use the track buffer that is already used for addresses outside
the 16MB address capability of the floppy controller. This allows to
remove a lot of code that relies on kernel virtual addresses. With
this gone there is just a single place left that looks at the bio,
which can be converted to memcpy_{from,to}_page, thus removing the need
for the extra block-layer bounce buffering for highmem pages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061755.811522-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").
The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.
This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:
====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().
Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-and-tested-by: Kurt Garloff <kurt@garloff.de>
Fixes: 09954bad4 ("floppy: refactor open() flags handling")
Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Denis Efremov <efremov@linux.com>
The floppy driver usually autodetects the media when used with the
normal /dev/fd? devices, which also are the only nodes created by udev.
But it also supports various aliases that force a given media format.
That is currently supported using the blk_register_region framework
which finds the floppy gendisk even for a 'mismatched' dev_t. The
problem with this (besides the code complexity) is that it creates
multiple struct block_device instances for the whole device of a
single gendisk, which can lead to interesting issues in code not
aware of that fact.
To fix this just create a separate gendisk for each of the aliases
if they are accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to use bdev_check_media_change instead of check_disk_change and
call floppy_revalidate manually. Given that floppy_revalidate only
deals with media change events, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the block_size helper instead of open coding it. Also remove the
check for a 0 block size, as that can't happen.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case
in floppy_queue_rq() is not handled correctly.
In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy
locked due to another request still being in-flight), we put the request
on the list of requests and return BLK_STS_OK to the block core, without
actually scheduling delayed work / doing further processing of the
request. This means that processing of this request is postponed until
another request comes and passess uncontended.
Which in some cases might actually never happen and we keep waiting
indefinitely. The simple testcase is
for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done
run in quemu. That reliably causes blkid eventually indefinitely hanging
in __floppy_read_block_0() waiting for completion, as the BIO callback
never happens, and no further IO is ever submitted on the (non-existent)
floppy device. This was observed reliably on qemu-emulated device.
Fix that by not queuing the request in the contended case, and return
BLK_STS_RESOURCE instead, so that blk core handles the request
rescheduling and let it pass properly non-contended later.
Fixes: a9f38e1dec ("floppy: convert to blk-mq")
Cc: stable@vger.kernel.org
Tested-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45
index 16 is out of range for type 'unsigned char [16]'
Call Trace:
...
setup_rw_floppy+0x5c3/0x7f0
floppy_ready+0x2be/0x13b0
process_one_work+0x2c1/0x5d0
worker_thread+0x56/0x5e0
kthread+0x122/0x170
ret_from_fork+0x35/0x40
From include/uapi/linux/fd.h:
struct floppy_raw_cmd {
...
unsigned char cmd_count;
unsigned char cmd[16];
unsigned char reply_count;
unsigned char reply[16];
...
}
This out-of-bounds access is intentional. The command in struct
floppy_raw_cmd may take up the space initially intended for the reply
and the reply count. It is needed for long 82078 commands such as
RESTORE, which takes 17 command bytes. Initial cmd size is not enough
and since struct setup_rw_floppy is a part of uapi we check that
cmd_count is in [0:16+1+16] in raw_cmd_copyin().
The patch adds union with original cmd,reply_count,reply fields and
fullcmd field of equivalent size. The cmd accesses are turned to
fullcmd where appropriate to suppress UBSAN warning.
Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers
for cmd & reply buffers of struct floppy_raw_cmd. Remove local to
floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE.
FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count
and reply fields.
Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct
floppy_drive_params instead of a magic number.
Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the
contents of the cmd buffer.
Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
When called with a negative drive value, set_fdc() would stick to the
current fdc (which was assumed to reflect the current_drive's FDC). We
do not need this anymore as the last call place with a negative value
was just addressed. Let's make this function always set both current_fdc
and current_drive so that there's no more ambiguity. A few comments
stating this were added to a few non-obvious places.
Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
This macro equals -1 and is used as an alternative for current_drive when
calling reschedule_timeout(), which in turn needs to remap it. This only
adds obfuscation, let's simply use current_drive.
Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
In floppy_resume() we don't properly reinitialize all FDCs, instead
we reinitialize the current FDC once per available FDC because value
-1 is passed to user_reset_fdc(). Let's simply save the current drive
and properly reinitialize each FDC.
Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
There's no need to iterate on current_fdc in do_floppy_init() anymore,
in the first case it's only used as an array index to access fdc_state[],
so let's get rid of this confusing assignment. The second case is a bit
trickier because user_reset_fdc() needs to already know current_fdc when
called with drive==-1 due to this call chain:
user_reset_fdc()
lock_fdc()
set_fdc()
drive<0 ==> new_fdc = current_fdc
Note that current_drive is not used in this code part and may even not
match a unit belonging to current_fdc. Instead of passing -1 we can
simply pass the first drive of the FDC being initialized, which is even
cleaner as it will allow the function chain above to consistently assign
both variables.
Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
The locking in the driver is far from being obvious, with unlocking
automatically happening at end of operations scheduled by interrupt,
especially for the error paths where one does not necessarily expect
that such an interrupt may be triggered. Let's add a few comments
about what to expect at certain places to avoid misdetecting bugs
which are not.
Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to
iterate on the global variable while setting up or freeing resources.
Now that they exclusively rely on functions which take the fdc as an
argument, so let's not touch the global one anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the drive is passed in argument so that the function does not
use current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single raw_cmd pointer
specific to the current fdc. It may make sense to have one per
fdc in the future. In addition, cont->done() still relies on the
current drive and current raw_cmd.
Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single reply_buffer[] which
will store the result for the current fdc. It may or may not make
sense to implement one buffer per fdc in the future.
Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-10-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
This is done in order to remove the confusion that arises at some places
in the code where local variables or arguments shadow the global variable.
It is already visible that some places are a bit awkward and iterate over
the global variable, for the sole reason that they used to rely on it being
named "fdc" in order to get the correct address when using FD_DOR. These
ones are easy to spot by searching for "for (current_fdc...".
Some more cleanup is definitely possible. For example
"fdc_state[current_fdc].somefield" is used all over the code and would
probably be better with "fdc_state->somefield" with fdc_state being set
when current_fdc is assigned. This would require to pass the pointer to
the current state instead of the current_fdc to the I/O functions.
Link: https://lore.kernel.org/r/20200301195555.11154-7-w@1wt.eu
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
FDC registers FD_STATUS, FD_DATA, FD_DOR, FD_DIR and FD_DCR used to be
defined relative to FD_IOPORT, which is the FDC's base address, itself
a macro depending on the "fdc" local or global variable.
This patch changes this so that the register macros above now only
reference the address offset, and that the FDC's address is explicitly
passed in each call to fd_inb() and fd_outb(), thus removing the macro.
With this change there is no more implicit usage of the local/global
"fdc" variable.
One place in the ARM code used to check if the port was equal to FD_DOR,
this was changed to testing the register by applying a mask to the port,
as was already done in the sparc code.
There are still occurrences of fd_inb() and fd_outb() in the PARISC
code and these ones remain unaffected since they already used to work
with a base address and a register offset.
The sparc, m68k and parisc code could now be slightly cleaned up to
benefit from the macro definitions above instead of the equivalent
hard-coded values.
Link: https://lore.kernel.org/r/20200301195555.11154-6-w@1wt.eu
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These two functions replace fd_inb() and fd_outb() in that they take
the FDC in argument. This will ease the separation of the base address
and the port everywhere the code is used.
Link: https://lore.kernel.org/r/20200301195555.11154-5-w@1wt.eu
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several macros were used to access reply_buffer[] at discrete positions
without making it obvious they were relying on this. These ones have
been replaced by their offset in the reply buffer to make these accesses
more obvious.
Link: https://lore.kernel.org/r/20200224212352.8640-11-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various macros were used to access raw_cmd for R/W or format commands
without making it obvious that raw_cmd->cmd[] was used. Let's expand
the macros to make this more obvious.
Link: https://lore.kernel.org/r/20200224212352.8640-10-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This macro doesn't bring much value and only slightly obfuscates the
code by silently using global variable "current_drive", let's expand it.
Link: https://lore.kernel.org/r/20200224212352.8640-9-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This macro doesn't bring much value and only slightly obfuscates the
code by silently using global variable "current_drive", let's expand it.
Link: https://lore.kernel.org/r/20200224212352.8640-8-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This macro doesn't bring much value and only slightly obfuscates the
code by silently using global variable "current_drive", let's expand it.
Link: https://lore.kernel.org/r/20200224212352.8640-7-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Denis Efremov