Commit Graph

21 Commits

Author SHA1 Message Date
Pawel Laszczak 11f656fc0a usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
commit 47625b018c6bc788bc10dd654c82696eb0a5ef11 upstream.

Cadence have several controllers from 0x000403xx family but current
driver suuport detecting only one with DID equal 0x0004034E.
It causes that if someone uses different CDNSP controller then driver
will use incorrect version and register space.
Patch fix this issue.

cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01 13:35:02 +01:00
Minda Chen 26910f977c usb: cdns3: Add PHY mode switch to usb2 PHY
cdns3 just set PHY mode switch for USB3.0 PHY.
If USB 2.0 PHY contains PHY mode switch setting,
USB 2.0 PHY mode function can't be called.
So add PHY mode switch function for USB 2.0 PHY.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230721095923.20445-1-minda.chen@starfivetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25 18:22:36 +02:00
Pawel Laszczak 79aa3e19fe usb: cdnsp: Fix segmentation fault in cdns_lost_power function
CDNSP driver read not initialized cdns->otg_v0_regs
which lead to segmentation fault. Patch fixes this issue.

Fixes: 2cf2581cd2 ("usb: cdns3: add power lost support for system resume")
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220111090737.10345-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26 14:11:16 +01:00
Frank Li 2cf2581cd2
usb: cdns3: add power lost support for system resume
If the controller lost its power during the system suspend, we need
to do all initialiation operations.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12 20:19:20 +08:00
Pawel Laszczak 6500f30b16
usb: cdns3: Adds missing __iomem markers
Patch adds missing __iomem markers in core.h file
and makes some changes in drd.c file related with
these markers.

The lack of __iomem has reported by sparse checker
on parsic architecture.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-01-14 09:01:33 +08:00
Pawel Laszczak 3d82904559
usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver
This patch introduces the main part of Cadence USBSSP DRD driver
to Linux kernel.
To reduce the patch size a little bit, the header file gadget.h was
intentionally added as separate patch.

The Cadence USBSSP DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.

The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.

The host side of USBSS DRD controller is compliant with XHCI.
The architecture for device side is almost the same as for host side,
and most of the XHCI specification can be used to understand how
this controller operates.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-29 12:36:13 +08:00
Pawel Laszczak 0b490046d8
usb: cdns3: Refactoring names in reusable code
Patch change the functions and objects names in reusable code.
The reusable code includes core.c, core.h, drd.c and drd.h files.
It also changes the names of all references to these functions and
objects in other cdns3 files. There are a lot of changes, but all
changes are very trivial.
The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in
in cdnsp driver what could introduce some confusion in understanding
of cdnsp driver.
This patch assumes to use three different prefixes in Cadence
USB drivers:
  cdns: for common reusable code
  cdnsp: for names related only with cdnsp driver
  cdns3: for names related only with cdns3 driver

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-29 12:36:13 +08:00
Pawel Laszczak 394c3a144d
usb: cdns3: Moves reusable code to separate module
Patch moves common reusable code used by cdns3 and cdnsp driver
to cdns-usb-common library. This library include core.c, drd.c
and host.c files.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-29 12:36:13 +08:00
Pawel Laszczak f738957277
usb: cdns3: Split core.c into cdns3-plat and core.c file
Patch splits file core.c into core.c containing the common reusable code
and cnd3-plat.c containing device platform specific code. These changes
are required to make possible reuse DRD part of CDNS3 driver in CDNSP
driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-29 12:36:13 +08:00
Pawel Laszczak db8892bb1b
usb: cdns3: Add support for DRD CDNSP
Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP).
CDNSP DRD is a part of Cadence CDNSP controller.
The DRD CDNSP controller has a lot of difference on hardware level but on
software level is quite compatible with CDNS3 DRD. For this reason
CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-29 12:36:13 +08:00
Peter Chen 9f65013594 usb: cdns3: drd: call PHY .set_mode accordingly
Some PHYs may need to enter related mode, and do some settings.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02 09:57:40 +03:00
Pawel Laszczak 2eae2dfd58 usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockup
USB2.0 PHY hangs in Rx Compliance test when the incoming packet
amplitude is varied below and above the Squelch Level of
Receiver during the active packet multiple times.

Version 1 of the controller allows PHY to be reset when RX fail condition
is detected to work around the above issue. This feature is
disabled by default and needs to be enabled using a bit from
the newly added PHYRST_CFG register. This patch enables the workaround.

There is no way to know controller version before device controller
is started and the workaround needs to be applied for both host and
device modes, so we rely on a DT property do decide when to
apply the workaround.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02 09:57:39 +03:00
Peter Chen b1234e3b3b usb: cdns3: add runtime PM support
Introduce runtime PM and wakeup interrupt handler for cdns3,
the runtime PM is default off since other cdns3 may not
implement glue layer support for runtime PM.

One typical wakeup event use case is xHCI runtime suspend will clear
USBCMD.RS bit, after that the xHCI will not trigger any interrupts,
so its parent (cdns core device) needs to resume xHCI device when
any (wakeup) events occurs at host port.

When the controller is in low power mode, the lpm flag will be set.
The interrupt triggered later than lpm flag is set considers as
wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup
occurs, it first disables interrupt to avoid later interrupt
occurrence since the controller is in low power mode at that
time, and access registers may be invalid at that time. At wakeup
handler, it will call pm_request_resume to wakeup xHCI device, and
at runtime resume handler, it will enable interrupt again.

The API platform_suspend is introduced for glue layer to implement
platform specific PM sequence.

Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02 09:57:38 +03:00
Pawel Laszczak b2aeb6da3d usb: cdns3: drd: simplify *switch_gadet and *switch_host
Patch split function cdns3_drd_switch_gadget and
cdns3_drd_switch_host into:
- cdns3_drd_host_on
- cdns3_drd_host_off
- cdns3_drd_gadget_on
- cdns3_drd_gadgett_off

These functions don't have any shared code so it's better to
have smaller, faster and easier functions.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:13 +03:00
Pawel Laszczak 08c35dd3cc usb: cdns3: Added CDNS3_ID_PERIPHERAL and CDNS3_ID_HOST
Patch adds 2 definitions that make it easier to understand the code.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:13 +03:00
Pawel Laszczak 245258495a usb: cdns3: drd: changed return type from int to bool
Patch changes return type from int to bool for
cdns3_is_host and cdns3_is_device functions.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:13 +03:00
Pawel Laszczak 03cce68a82 usb: cdns3: drd: return IRQ_NONE explicitly.
IRQ_NONE can be returned indirect.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:12 +03:00
Pawel Laszczak ecf4f823fb usb: cnds3: drd: deleted !=
Patch deletes unnecessary != from condition statement in cdns3_drd_init
function.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:12 +03:00
Pawel Laszczak 27afe16612 usb: cdns3: drd: removed not needed variables initialization
Patch remove some variables initialization from core.c and drd.c
file.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24 16:45:12 +03:00
Peter Chen eed6ed6e70 usb: cdns3: change dev_info to dev_dbg for debug message
During device mode initialization, lots of device information
are printed to console, see below. Change them as debug message.

cdns-usb3 5b130000.cdns3: Initialized  ep0 support:
cdns-usb3 5b130000.cdns3: Initialized  ep1out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep2out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep3out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep4out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep5out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep6out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep7out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep1in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep2in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep3in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep4in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep5in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep6in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized  ep7in support: BULK, INT ISO

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200331081005.32752-4-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16 15:31:35 +02:00
Pawel Laszczak 7733f6c32e usb: cdns3: Add Cadence USB3 DRD Driver
This patch introduce new Cadence USBSS DRD driver to Linux kernel.

The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.

The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.

The host side of USBSS-DRD controller is compliant with XHCI
specification, so it works with standard XHCI Linux driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-29 10:57:04 +03:00