Some peripheral clocks on SAMA7G5 supports requesting parent to change
its rate (image related clocks: csi, csi2dc, isc). Add support
so that if registered with this option the clock rate to be
requested from parent.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add master clock support (MCK1..4) for SAMA7G5. SAMA7G5's PMC has
multiple master clocks feeding different subsystems. One of them
feeds image subsystem and is changeable based on image subsystem
needs.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-13-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pass the ID of changeable parent at registration. This will allow
the scalability of this clock driver with regards to the changeable
parent ID for versions of this IP where changeable parent is not the
last one in the parents list (e.g. SAMA7G5). With this the clock flags
are set to zero in case we have no changeable parent. Also in
clk_generated_best_diff() the *best_diff variable is check against
tmp_diff variable using ">=" operator instead of ">" so that in case
the requested frequency could be obtained using fix parents + gck
dividers but the clock also supports changeable parent to be able
to force the usage of the changeable parent.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In commit a436c2a447 ("clk: at91: add sam9x60 PLL driver")
the fractional part of PLL wasn't set on registers but it was
calculated and taken into account for determining div and mul
(see sam9x60_pll_get_best_div_mul()).
Fixes: a436c2a447 ("clk: at91: add sam9x60 PLL driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-7-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to datasheet the range of 600-1200MHz is for the
frequency generated by the fractional part of the PLL (namely
Fcorepllck according to datasheet). With this in mind the output
range of the PLL itself (fractional + div), taking into account
that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz.
Fixes: a436c2a447 ("clk: at91: add sam9x60 PLL driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use logical or for range check. In case bestrate is not in
characteristics->output[0].min..characteristics->output[0].max
range we should return -ERANGE.
Fixes: a436c2a447 ("clk: at91: add sam9x60 PLL driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1595403506-8209-5-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
__clk_determine_rate() may return error. Skip the current step
in case of error.
Fixes: 1a1a36d72e ("clk: at91: clk-generated: make gclk determine audio_pll rate")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1595403506-8209-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.
Use device_node_to_regmap to resolve this as it looks up the regmap in
the same list but doesn't care about the clocks. This issue is detected
by lockdep when booting the sama5d3 with a device tree containing the
new clk bindings.
This fix already happened in 6956eb33ab ("clk: at91: fix possible
deadlock") for the drivers that had been migrated to the new clk binding
back then. This does the same for the new drivers as well.
Fixes: 01e2113de9 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20200703073236.23923-1-a.fatoum@pengutronix.de
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls. The work to do that is not yet complete, so probably won't make
it in for v5.8, but we are looking to get this simple patch in for
v5.8 since we have it ready. We are planning on the rest of the work
for extending the SafeSetID LSM being merged during the v5.9 merge
window.
This patch was sent to the security mailing list and there were no objections.
-----BEGIN PGP SIGNATURE-----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=I+0L
-----END PGP SIGNATURE-----
Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
-----BEGIN PGP SIGNATURE-----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=5S0s
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d7 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
This reverts commit a43a67a2d7.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f644727 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f644727 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Iwqj
-----END PGP SIGNATURE-----
Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.
See commit a7f7f6248d ("treewide: replace '---help---' in Kconfig
files with 'help'")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers. The one
non-driver set is the three optical disk (sr) changes where two are
error path fixes and one is a helper conversion. The big driver
change is the hpsa compat_alloc_userspace rework by Al so he can kill
the remaining user. This has been tested and acked by the maintainer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXuTsoCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishc1zAP9yJpct
+Lrac+htBQQ41bAiayPFJ3qj4HtwC4TE4l5DmgD9EbaoJkRtl/F5NP8knzUQ5+wQ
k0GG1Vriyj/2um75ezo=
=PVTc
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
Pull i2c updates from Wolfram Sang:
"I2C has quite some patches for you this time. I hope it is the move to
per-driver-maintainers which is now showing results. We will see.
The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
larger refactoring of the Designware, Tegra, and PXA drivers, the
Cadence driver supports being a slave now, and there is support to
instanciate SPD eeproms for well-known cases (which will be
user-visible because the i801 driver supports it), and some
devm_platform_ioremap_resource() conversions which blow up the
diffstat.
Note that I applied the Nuvoton driver quite late, so some minor fixup
patches arrived during the merge window. I chose to apply them right
away because they were trivial"
* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
i2c: Drop stray comma in MODULE_AUTHOR statements
i2c: npcm7xx: npcm_i2caddr[] can be static
MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
i2c: npcm7xx: Fix a couple of error codes in probe
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
i2c: npcm7xx: Remove unnecessary parentheses
i2c: npcm7xx: Add support for slave mode for Nuvoton
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
i2c: pxa: don't error out if there's no pinctrl
i2c: add 'single-master' property to generic bindings
i2c: designware: Add Baikal-T1 System I2C support
i2c: designware: Move reg-space remapping into a dedicated function
i2c: designware: Retrieve quirk flags as early as possible
i2c: designware: Convert driver to using regmap API
i2c: designware: Discard Cherry Trail model flag
i2c: designware: Add Baytrail sem config DW I2C platform dependency
i2c: designware: slave: Set DW I2C core module dependency
i2c: designware: Use `-y` to build multi-object modules
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
...
-----BEGIN PGP SIGNATURE-----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=HeJz
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
- a set of atomisp patches. They remove several abstraction layers, and
fixes clang and gcc warnings (that were hidden via some macros that
were disabling 4 or 5 types of warnings there). There are also some
important fixes and sensor auto-detection on newer BIOSes via ACPI
_DCM tables.
- some fixes
* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
media: rkvdec: Fix H264 scaling list order
media: v4l2-ctrls: Unset correct HEVC loop filter flag
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
media: v4l2-subdev.rst: correct information about v4l2 events
media: s5p-mfc: Properly handle dma_parms for the allocated devices
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
media: cedrus: Implement runtime PM
media: cedrus: Program output format during each run
media: atomisp: improve ACPI/DMI detection logs
media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: Revert "media: atomisp: Add some ACPI detection info"
media: atomisp: improve sensor detection code to use _DSM table
media: atomisp: get rid of an iomem abstraction layer
media: atomisp: get rid of a string_support.h abstraction layer
media: atomisp: use strscpy() instead of less secure variants
media: atomisp: set DFS to MAX if sensor doesn't report fps
media: atomisp: use different dfs failed messages
media: atomisp: change the detection of ISP2401 at runtime
media: atomisp: use macros from intel-family.h
media: atomisp: don't set hpll_freq twice with different values
...
- Small collection of cleanups to rework usage of ->queuedata and the
GUID api.
-----BEGIN PGP SIGNATURE-----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=Bhhc
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Small collection of cleanups to rework usage of ->queuedata and the
GUID api"
* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: stop using ->queuedata
nvdimm/btt: stop using ->queuedata
nvdimm/blk: stop using ->queuedata
libnvdimm: Replace guid_copy() with import_guid() where it makes sense
- Fix an integer overflow problem in the unshare actor.
-----BEGIN PGP SIGNATURE-----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=s+Pr
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single iomap bug fix for a variable type mistake on 32-bit
architectures, fixing an integer overflow problem in the unshare
actor"
* tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Fix unsharing of an extent >2GB on a 32-bit machine
- Fix a resource leak on an error bailout.
-----BEGIN PGP SIGNATURE-----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=C0rZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
Only one commit - increase the size of the ring used for xen transport.
-----BEGIN PGP SIGNATURE-----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=8sae
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.8' of git://github.com/martinetd/linux
Pull 9p update from Dominique Martinet:
"Another very quiet cycle... Only one commit: increase the size of the
ring used for xen transport"
* tag '9p-for-5.8' of git://github.com/martinetd/linux:
9p/xen: increase XEN_9PFS_RING_ORDER
One fix for a recent change which broke nested KVM guests on Power9.
Thanks to:
Alexey Kardashevskiy.
-----BEGIN PGP SIGNATURE-----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=5zJH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a recent change which broke nested KVM guests on Power9.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix nested guest RC bits update
- fix for "hex" Kconfig default to use 0x0 rather than 0 to allow
these to be removed from defconfigs
- fix from Ard Biesheuvel for EFI HYP mode booting
-----BEGIN PGP SIGNATURE-----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=cTpy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix for "hex" Kconfig default to use 0x0 rather than 0 to allow these
to be removed from defconfigs
- fix from Ard Biesheuvel for EFI HYP mode booting
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully
ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0
One patch found wile I was getting the glibc port ready:
- Fix issue with clone TLS arg getting overwritten
-----BEGIN PGP SIGNATURE-----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=FMK3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC update from Stafford Horne:
"One patch found wile I was getting the glibc port ready: fix issue
with clone TLS arg getting overwritten"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix issue with argument clobbering for clone/fork
Pull alpha updates from Matt Turner:
"A few changes for alpha. They're mostly small janitorial fixes but
there's also a build fix and most notably a patch from Mikulas that
fixes a hang on boot on the Avanti platform, which required quite a
bit of work and review"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Fix build around srm_sysrq_reboot_op
alpha: c_next should increase position index
alpha: Replace sg++ with sg = sg_next(sg)
alpha: fix memory barriers so that they conform to the specification
alpha: remove unneeded semicolon in sys_eiger.c
alpha: remove unneeded semicolon in osf_sys.c
alpha: Replace strncmp with str_has_prefix
alpha: fix rtc port ranges
alpha: Kconfig: pedantic formatting
* Unmap a whole guest page if an MCE is encountered in it to avoid
follow-on MCEs leading to the guest crashing, by Tony Luck.
This change collided with the entry changes and the merge resolution
would have been rather unpleasant. To avoid that the entry branch was
merged in before applying this. The resulting code did not change
over the rebase.
* AMD MCE error thresholding machinery cleanup and hotplug sanitization, by
Thomas Gleixner.
* Change the MCE notifiers to denote whether they have handled the error
and not break the chain early by returning NOTIFY_STOP, thus giving the
opportunity for the later handlers in the chain to see it. By Tony Luck.
* Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.
* Last but not least, the usual round of fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7j5m0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXyMD/9GneajFaI5D0F59/btEGAx1X0PTDz1
LrGf79Y5NqSJrzggsnrdFzsGjJNcQ2KbfSgs9fhdsvvvIpK+YqZ+rVFAg7DcKc2n
RwHd+X3TluKsc4oCuagZli7R4HHO5P9hbkHY6DD++F0eeMblLhNnq1hGUSdoENHN
HFsZapQpvlpn3IYN1e07lFBVvujRL/pBez7tmhh6bPxmcLZFCBrIHuAXz7dbzz0Y
BjhVRLNq6+9Yztvrt8uIgc1EAoMfprkY6nVtvkxC5gmVor3orkRC4rRNc/+jhgDK
p0s1JxDgb3SNN79no9wvQaqRNs/rNlAx6xSA0gmW+SbxrFEsk6cUp1BVVRr031dk
/QGedvpJzK7PjCX+d7Jvy+391q1YEsdnbQhXRdjSXQf+DihWm98O++wDodw9kgwt
FgkZD4qICT3xtpGs1bqDgrm220g8d27nGjsXlvFfyVYAQAlE2vcx0NqySOTT7NeT
Zu6GIvGcGCObJT2JTWbPkvbm2aNYXzYNZGRBLlEzy7qFXuVG4aKR6W1L6uSW3SmK
UUo/F3KHgZWM/h1PyMbxzAvu60eojBcEXva8jDxBv0GCDJhzFV3yOVdgxrLPpGcZ
7EqiUtTrxvxGOFjpFFaZRiT0R89ZfvOxVyXGwMX8zph9NyPLSj9MspyQSkhFFREz
0FAfy/7wqDfMRg==
=iWiy
-----END PGP SIGNATURE-----
Merge tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Thomas Gleixner:
"RAS updates from Borislav Petkov:
- Unmap a whole guest page if an MCE is encountered in it to avoid
follow-on MCEs leading to the guest crashing, by Tony Luck.
This change collided with the entry changes and the merge
resolution would have been rather unpleasant. To avoid that the
entry branch was merged in before applying this. The resulting code
did not change over the rebase.
- AMD MCE error thresholding machinery cleanup and hotplug
sanitization, by Thomas Gleixner.
- Change the MCE notifiers to denote whether they have handled the
error and not break the chain early by returning NOTIFY_STOP, thus
giving the opportunity for the later handlers in the chain to see
it. By Tony Luck.
- Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.
- Last but not least, the usual round of fixes and improvements"
* tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy()
x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned
EDAC/amd64: Add AMD family 17h model 60h PCI IDs
hwmon: (k10temp) Add AMD family 17h model 60h PCI match
x86/amd_nb: Add AMD family 17h model 60h PCI IDs
x86/mcelog: Add compat_ioctl for 32-bit mcelog support
x86/mce: Drop bogus comment about mce.kflags
x86/mce: Fixup exception only for the correct MCEs
EDAC: Drop the EDAC report status checks
x86/mce: Add mce=print_all option
x86/mce: Change default MCE logger to check mce->kflags
x86/mce: Fix all mce notifiers to update the mce->kflags bitmask
x86/mce: Add a struct mce.kflags field
x86/mce: Convert the CEC to use the MCE notifier
x86/mce: Rename "first" function as "early"
x86/mce/amd, edac: Remove report_gart_errors
x86/mce/amd: Make threshold bank setting hotplug robust
x86/mce/amd: Cleanup threshold device remove path
x86/mce/amd: Straighten CPU hotplug path
x86/mce/amd: Sanitize thresholding device creation hotplug path
...
This all started about 6 month ago with the attempt to move the Posix CPU
timer heavy lifting out of the timer interrupt code and just have lockless
quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and the
review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some inconsistencies
vs. instrumentation in general. The int3 text poke handling in particular
was completely unprotected and with the batched update of trace events even
more likely to expose to endless int3 recursion.
In parallel the RCU implications of instrumenting fragile entry code came
up in several discussions.
The conclusion of the X86 maintainer team was to go all the way and make
the protection against any form of instrumentation of fragile and dangerous
code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit d5f744f9a2.
The (almost) full solution introduced a new code section '.noinstr.text'
into which all code which needs to be protected from instrumentation of all
sorts goes into. Any call into instrumentable code out of this section has
to be annotated. objtool has support to validate this. Kprobes now excludes
this section fully which also prevents BPF from fiddling with it and all
'noinstr' annotated functions also keep ftrace off. The section, kprobes
and objtool changes are already merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the noinstr.text
section or enforcing inlining by marking them __always_inline so the
compiler cannot misplace or instrument them.
- Splitting and simplifying the idtentry macro maze so that it is now
clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now calls
into C after doing the really necessary ASM handling and the return
path goes back out without bells and whistels in ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3 recursion
issue.
- Consolidate the declaration and definition of entry points between 32
and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the regular
exception entry code.
- All ASM entry points except NMI are now generated from the shared header
file and the corresponding macros in the 32 and 64 bit entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central point
that all corresponding entry points share the same semantics. The
actual function body for most entry points is in an instrumentable
and sane state.
There are special macros for the more sensitive entry points,
e.g. INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required other
isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and disable
it on NMI, #MC entry, which allowed to get rid of the nested #DB IST
stack shifting hackery.
- A few other cleanups and enhancements which have been made possible
through this and already merged changes, e.g. consolidating and
further restricting the IDT code so the IDT table becomes RO after
init which removes yet another popular attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this was
not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they have
not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle code
especially the parts where RCU stopped watching. This was beyond the
scope of the more obvious and exposable problems and is on the todo
list.
The lesson learned from this brain melting exercise to morph the evolved
code base into something which can be validated and understood is that once
again the violation of the most important engineering principle
"correctness first" has caused quite a few people to spend valuable time on
problems which could have been avoided in the first place. The "features
first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to this
effort. Special thanks go to the following people (alphabetical order):
Alexandre Chartre
Andy Lutomirski
Borislav Petkov
Brian Gerst
Frederic Weisbecker
Josh Poimboeuf
Juergen Gross
Lai Jiangshan
Macro Elver
Paolo Bonzini
Paul McKenney
Peter Zijlstra
Vitaly Kuznetsov
Will Deacon
-----BEGIN PGP SIGNATURE-----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=llba
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Thomas Gleixner:
"The x86 entry, exception and interrupt code rework
This all started about 6 month ago with the attempt to move the Posix
CPU timer heavy lifting out of the timer interrupt code and just have
lockless quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and
the review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some
inconsistencies vs. instrumentation in general. The int3 text poke
handling in particular was completely unprotected and with the batched
update of trace events even more likely to expose to endless int3
recursion.
In parallel the RCU implications of instrumenting fragile entry code
came up in several discussions.
The conclusion of the x86 maintainer team was to go all the way and
make the protection against any form of instrumentation of fragile and
dangerous code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit
d5f744f9a2 ("Pull x86 entry code updates from Thomas Gleixner")
That (almost) full solution introduced a new code section
'.noinstr.text' into which all code which needs to be protected from
instrumentation of all sorts goes into. Any call into instrumentable
code out of this section has to be annotated. objtool has support to
validate this.
Kprobes now excludes this section fully which also prevents BPF from
fiddling with it and all 'noinstr' annotated functions also keep
ftrace off. The section, kprobes and objtool changes are already
merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the
noinstr.text section or enforcing inlining by marking them
__always_inline so the compiler cannot misplace or instrument
them.
- Splitting and simplifying the idtentry macro maze so that it is
now clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now
calls into C after doing the really necessary ASM handling and
the return path goes back out without bells and whistels in
ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3
recursion issue.
- Consolidate the declaration and definition of entry points between
32 and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the
regular exception entry code.
- All ASM entry points except NMI are now generated from the shared
header file and the corresponding macros in the 32 and 64 bit
entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central
point that all corresponding entry points share the same
semantics. The actual function body for most entry points is in an
instrumentable and sane state.
There are special macros for the more sensitive entry points, e.g.
INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required
other isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and
disable it on NMI, #MC entry, which allowed to get rid of the
nested #DB IST stack shifting hackery.
- A few other cleanups and enhancements which have been made
possible through this and already merged changes, e.g.
consolidating and further restricting the IDT code so the IDT
table becomes RO after init which removes yet another popular
attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this
was not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they
have not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle
code especially the parts where RCU stopped watching. This was
beyond the scope of the more obvious and exposable problems and is
on the todo list.
The lesson learned from this brain melting exercise to morph the
evolved code base into something which can be validated and understood
is that once again the violation of the most important engineering
principle "correctness first" has caused quite a few people to spend
valuable time on problems which could have been avoided in the first
place. The "features first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to
this effort. Special thanks go to the following people (alphabetical
order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
Vitaly Kuznetsov, and Will Deacon"
* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
x86/entry: Force rcu_irq_enter() when in idle task
x86/entry: Make NMI use IDTENTRY_RAW
x86/entry: Treat BUG/WARN as NMI-like entries
x86/entry: Unbreak __irqentry_text_start/end magic
x86/entry: __always_inline CR2 for noinstr
lockdep: __always_inline more for noinstr
x86/entry: Re-order #DB handler to avoid *SAN instrumentation
x86/entry: __always_inline arch_atomic_* for noinstr
x86/entry: __always_inline irqflags for noinstr
x86/entry: __always_inline debugreg for noinstr
x86/idt: Consolidate idt functionality
x86/idt: Cleanup trap_init()
x86/idt: Use proper constants for table size
x86/idt: Add comments about early #PF handling
x86/idt: Mark init only functions __init
x86/entry: Rename trace_hardirqs_off_prepare()
x86/entry: Clarify irq_{enter,exit}_rcu()
x86/entry: Remove DBn stacks
x86/entry: Remove debug IDT frobbing
x86/entry: Optimize local_db_save() for virt
...
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YTGf
-----END PGP SIGNATURE-----
Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
EFI on ARM only supports short descriptors, and given that it mandates
that the MMU and caches are on, it is implied that booting in HYP mode
is not supported.
However, implementations of EFI exist (i.e., U-Boot) that ignore this
requirement, which is not entirely unreasonable, given that it makes
HYP mode inaccessible to the operating system.
So let's make sure that we can deal with this condition gracefully.
We already tolerate booting the EFI stub with the caches off (even
though this violates the EFI spec as well), and so we should deal
with HYP mode boot with MMU and caches either on or off.
- When the MMU and caches are on, we can ignore the HYP stub altogether,
since we can carry on executing at HYP. We do need to ensure that we
disable the MMU at HYP before entering the kernel proper.
- When the MMU and caches are off, we have to drop to SVC mode so that
we can set up the page tables using short descriptors. In this case,
we need to install the HYP stub as usual, so that we can return to HYP
mode before handing over to the kernel proper.
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ZBOOT_ROM_TEXT and ZBOOT_ROM_BSS are defined as 'hex' but had a default
of "0". Kconfig will helpfully expand a text entry of 0 to 0x0 but
because this is not the same as the default value it was treated as
being explicitly set when running 'make savedefconfig' so most arm
defconfigs have CONFIG_ZBOOT_ROM_TEXT=0x0 and CONFIG_ZBOOT_ROM_BSS=0x0.
Change the default to 0x0 which will mean next time the defconfigs are
re-generated the spurious config entries will be removed.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The patch introducing the struct was probably never compile tested,
because it sets a handler with a wrong function signature. Wrap the
handler into a functions with the correct signature to fix the build.
Fixes: 0f1c9688a1 ("tty/sysrq: alpha: export and use __sysrq_get_key_op()")
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The commits cd0e00c106 and 92d7223a74 broke boot on the Alpha Avanti
platform. The patches move memory barriers after a write before the write.
The result is that if there's iowrite followed by ioread, there is no
barrier between them.
The Alpha architecture allows reordering of the accesses to the I/O space,
and the missing barrier between write and read causes hang with serial
port and real time clock.
This patch makes barriers confiorm to the specification.
1. We add mb() before readX_relaxed and writeX_relaxed -
memory-barriers.txt claims that these functions must be ordered w.r.t.
each other. Alpha doesn't order them, so we need an explicit barrier.
2. We add mb() before reads from the I/O space - so that if there's a
write followed by a read, there should be a barrier between them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: cd0e00c106 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering")
Fixes: 92d7223a74 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2")
Cc: stable@vger.kernel.org # v4.17+
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Claudiu Beznea