The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().
Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like
asm/smp.h
asm/apic.h
asm/hardirq.h
linux/irq.h
linux/topology.h
linux/smp.h
asm/smp.h
or
linux/gfp.h
linux/mmzone.h
asm/mmzone.h
asm/mmzone_64.h
asm/smp.h
asm/apic.h
asm/hardirq.h
linux/irq.h
linux/irqdesc.h
linux/kobject.h
linux/sysfs.h
linux/kernfs.h
linux/idr.h
linux/gfp.h
and others.
This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.
A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.
However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.
Remove the linux/irq.h #include from x86' asm/hardirq.h.
Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.
Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch implement the necessary functions to compute and add CRCs
entries:
- Implement the set_crc_source() callback.
- Compute CRC using crc32 on the visible part of the framebuffer.
- Use ordered workqueue per output to compute and add CRC at the end
of a vblank.
- Use appropriate synchronization methods since the CRC computation must
be atomic wrt the generated vblank event for a given atomic update, by
using spinlock across atomic_begin/atomic_flush to wrap the event
handling code completely and match the flip event with the CRC.
Since vkms_crc_work_handle() can sleep, spinlock can't be acquired
while accessing vkms_output->primary_crc to compute CRC.
To make sure the data is updated and released without conflict with
the vkms_crc_work_handle(), the work_struct is flushed @crtc_destroy
and the data is updated before scheduling the work handle again, as
follow:
* CRC data update:
1- store vkms_crc_data {fb, src} per plane_state
2- @plane_duplicate_state -> allocate vkms_crc_data
3- during atomic commit (@atomic_update) ->
a) copy {fb, src} to plane_state->crc_data
b) get reference to fb,
3- @plane_destroy_state -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
* Atomic Commit:
1- vkms_plane_atomic_check
2- vkms_prepare_fb -> vmap vkms_gem_obj->vaddr
3- atomic_begin -> hold crc spinlock
4- atomic_plane_update -> a) update vkms_output->primary_crc
b) get reference to fb
5- atomic_flush -> a) send vblank event while holding event_lock
b) release crc spinlock
* hrtimer regular callback:
1- hold crc spinlock
2- drm_crtc_handle_vblank()
3- queue vkms_crc_work_handle
4- release crc spinlock
* cleanup:
1- @cleanup_fb ->vunmap vkms_gem_obj->vaddr
2- @crtc_destroy -> flush work struct
3- @plane_destroy -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[seanpaul fixed typo in vkms_crtc s/vblamk/vblank/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b948327f48c3e70ab232b4a0848ee6d033b26484.1533171495.git.hamohammed.sa@gmail.com
[Why]
VGA sometimes has trouble retrieving the EDID on very long cables, KVM
switches, or old displays.
[How]
Only require EDID read for HDMI and DVI and exempt other types (DP,
VGA). We currently don't support VGA but if anyone adds support in the
future this might get overlooked.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some boards seem to have a problem where HPD is high on HDMI even though
no display is connected. We don't want to report these as connected. DP
spec still requires us to report DP displays as connected when HPD is
high but we can't read the EDID in order to go to fail-safe mode.
[How]
If connector_signal is not DP abort detection if we can't retrieve the
EDID.
v2: Add Bugzilla and stable
Bugzilla: https://bugs.freedesktop.org/107390
Bugzilla: https://bugs.freedesktop.org/106846
Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Ref- commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_mixed() returns err which driver
mapped into VM_FAULT_* type. The new function
vmf_insert_mixed() will replace this inefficiency by
returning VM_FAULT_* type.
vmf_error() is the newly introduce inline function
in 4.17-rc6.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
PX30 have vop big and vop lite, just like rk3036 and rk3126
the max input and output resolution is 1920x1080, the main
difference between the two vop is:
vop big:
win0 support yuv and rgb format;
win1 and win2 support rgb format;
vop lit:
win1 support rgb format;
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530003215-46593-3-git-send-email-hjc@rock-chips.com
This is better than storing -ENODEV in the id number. This fixes SoCs
with only one IPU that don't specify an IPU alias in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and
UV_OFFSET), are not correct. The height component to the offset was
calculated as:
(pix->width * y / 4)
But this does not produce correct offsets for odd values of y (luma
line #). The luma line # must be decimated by two to produce the
correct U/V line #, so the correct formula is:
(pix->width * (y / 2) / 2)
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Move the non-DT configuration of the TDA998x into tda998x_create()
so that we do all setup in one place.
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This fits better with the drm_bridge callbacks for when this
driver becomes a drm_bridge.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
[edited by rmk to just split the tda998x_encoder_dpms() function
and restore the double-disable protection we originally had,
preserving original behaviour.]
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This prepares for being a drm_bridge which will not register the
encoder. That makes the connector the better choice.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_tt.c.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixed the error when do not configure CONFIG_X86, otherwise, below
error will be encountered.
All errors (new ones prefixed by >>):
drivers/gpu/drm/ttm/ttm_page_alloc_dma.c: In function 'ttm_set_pages_caching':
>> drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:272:7: error: implicit declaration of function 'set_pages_array_uc'; did you mean
+'ttm_set_pages_array_uc'? [-Werror=implicit-function-declaration]
r = set_pages_array_uc(pages, cpages);
^~~~~~~~~~~~~~~~~~
ttm_set_pages_array_uc
cc1: some warnings being treated as errors
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"(an unmatched left parenthesis
creates an unresolved tension
that will stay with you all day."
-- Randall Munroe
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727203331.27778-1-paulo.r.zanoni@intel.com
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
With this conversion, rockchip_drm_fb_resume() and
rockchip_drm_fb_suspend() will not be used anymore.
Both of these functions can be removed.
Also, in struct rockchip_drm_private state will not be
used anymore. So this can be removed forever.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Co-Developed-by: Ajit Negi <ajitn.linux@gmail.com>
[changed to Co-Developed-by, according to process/submitting-patches.rst]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731203430.GA30136@jordon-HP-15-Notebook-PC
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
with this conversion, the remaining member of struct
imx_drm_device, state, will be no more useful and it
could be removed forever.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
[p.zabel@pengutronix.de: rebased onto drm-next, updated commit message]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This set of changes migrates Armada DRM from legacy modeset to atomic
modeset. This is everything from the "Transition Armada DRM planes to
atomic state" and "Finish Armada DRM transition to atomic modeset"
patch sets as posted on drm-devel, excluding the "Finish Armada DRM DT
support" series.
These series did not evoke any comments - if there are any, these can
be addressed via follow up patches.
Developed and tested on Dove Cubox with xf86-video-armada including the
overlay plane, and also tested with the tools in libdrm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730110543.GA30664@rmk-PC.armlinux.org.uk
A bit larger this time around, due to introduction of "dpu1" support
for the display controller in sdm845 and beyond. This has been on
list and undergoing refactoring since Feb (going from ~110kloc to
~30kloc), and all my review complaints have been addressed, so I'd be
happy to see this upstream so further feature work can procede on top
of upstream.
Also includes the gpu coredump support, which should be useful for
debugging gpu crashes. And various other misc fixes and such.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-8y3zguY0Mj1vh=o+vrv_bJ8AwZ96wBXYPvMeQT2XcA@mail.gmail.com
idx can be indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:408 amdgpu_set_pp_force_state()
warn: potential spectre issue 'data.states'
Fix this by sanitizing idx before using it to index data.states
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a missing void parameter to function dc_create_transfer_func, fixes
sparse warning:
warning: non-ANSI function declaration of function 'dc_create_transfer_func'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
v2:
* set prefix to drm/amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
v2:
* changed prefix to drm/amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We removed the redundancy of having an extra scheduler field, so we
can't set the rq to NULL any more or otherwise won't know which
scheduler to use for the cleanup.
Just remove the entity from the scheduling list instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107367
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Note which task is using the entity and only kill it if the last user of
the entity is killed. This should prevent problems when entities are leaked to
child processes.
v2: add missing kernel doc
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having extra handling just create an empty bo_list when no
handle is provided.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids multiple allocations for the head and the array.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to iterate over all entries in a bo_list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RCU grace period is harmless and avoiding it is not worth the effort
of doubling the implementation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bo_list handle is allocated by OP_CREATE, so in OP_UPDATE here we just
re-create the bo_list object and replace the handle. This way we don't
need locking to protect the bo_list because it's always re-created when
changed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Further demangle amdgpu.h
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to trace all VM ranges which should be valid inside a CS.
v2: dump mappings without BO as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> (v1)
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return -EINVAL when both the BOs as well as a list handle is provided in
the IOCTL.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
long might only be 32bit in size and we can easily use more than 4GB
here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I refactored the include directives under include/drm/ some time ago.
This flag is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we silently don't use a BO list when the handle is invalid.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This test was reversed so it would end up leading to vddnb value
can't be read via hwmon on APU.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the voltage showed in debugfs and hwmon should be in mV
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Only delete the dead temp variables in Polaris.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DIDTConfig_Polaris12[] table missed a big chunk of data.
Pointed by aidan.fabius <aidan.fabius@coreavi.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The HDLCD engine needs an active plane while the CRTC is active, as
it will start scanning out data from HDLCD_REG_FB_BASE once it gets
enabled. Make sure that the only available plane doesn't get disabled
while the CRTC remains active, as this will scanout invalid data.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The plane cleanup handler currently calls drm_plane_helper_disable(),
which is a legacy helper function. Replace it with a call to
drm_atomic_helper_shutdown() at removal time. The plane .destroy()
handler now consisting only of a call to drm_plane_cleanup(), replace it
with direct calls to that function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The top-level error handler calls drm_mode_config_cleanup() which will
destroy all planes. There's no need to destroy them manually in lower
error handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Replace driver's code with the generic helpers that do the same thing
including the NULL check.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Trivial fix to spelling mistake in error messages
"diable" -> "disable"
"cliend" -> "client"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This function name was changed to drm_connector_attach_encoder().
Unfortunately this driver was posted on the list before that change, and
applied after
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge
driver")
Cc: Sandeep Panda <spanda@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730174225.257255-1-seanpaul@chromium.org
The udl kms driver writes messages to the syslog whenever some application
opens or closes /dev/fb0 and whenever the user switches between the
Xserver and the console.
This patch changes the priority of these messages to debug.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
spin_lock_irqsave and spin_unlock_irqrestore is inteded to be called from
a context where it is unknown if interrupts are enabled or disabled (such
as interrupt handlers). From a process context, we should call
spin_lock_irq and spin_unlock_irq, that avoids the costly pushf and popf
instructions.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Modern processors can detect linear memory accesses and prefetch data
automatically, so there's no need to use prefetch.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Division is slow, so it shouldn't be done by the pixel generating code.
The driver supports only 2 or 4 bytes per pixel, so we can replace
division with a shift.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
We must use kzalloc when allocating the fb_deferred_io structure.
Otherwise, the field first_io is undefined and it causes a crash.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udl kms driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we leave urbs around, it causes not only leak, but also memory
corruption. This patch fixes the function udl_free_urb_list, so that it
always waits for all urbs that are in progress.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Recently drm_mode_connector_attach_encoder changed it's name. The change
was not noticed by bridge author, as a result gcc reports compile error
on next branch.
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727094859.27727-1-a.hajda@samsung.com
Mark a number of static functions that are only unsed in the file
that defines them and remove the prototypes from the headers where
needed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove dpu_format_get_block_size, dpu_format_get_framebuffer_size,
dpu_set_scaler_v2 and dpu_copy_formats they are unused and unneeded.
Signed-off-by: Jordan Crouse <jcrouse@codeauorora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
None of the functions in dpu_kms_utils.c seem to be used so
remove them all.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove a chunk of unused code from drm_crtc.c, namely
dpu_crtc_res_add, dpu_crtc_res_get, dpu_crtc_res_put
and associated static functions.
Also zap dpu_crtc_event_queue(), helper functions
and members.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove dpu_encoder_check_mode and dpu_encoder_helper_hw_release
frmo drm_encoder.c as they appear to be unused.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The suspend/resume functions are not referenced when power
management is disabled:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1288:12: error: 'dpu_runtime_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1261:12: error: 'dpu_runtime_suspend' defined but not used [-Werror=unused-function]
This marks them as __maybe_unused to let the compiler
drop the functions without complaining.
Fixes: 591225291ca2 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fix the sparse error. the dpu_rm_init declaration is not consistent
with the implement.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
[robclark un-typo'd subject line]
Signed-off-by: Rob Clark <robdclark@gmail.com>
All users of do_gettimeofday() have been removed, but this one recently
crept in, along with an incorrect printing of the microseconds portion.
This converts it to using ktime_get_real_timespec64() as a direct
replacement, and adds the leading zeroes. I considered using monotonic
times (ktime_get()) instead, but as this timestamp appears to only
be used for humans rather than compared with other timestamps, the
real time domain is probably good enough.
Fixes: e43b045e2c82 ("drm/msm/gpu: Capture the state of the GPU")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This fixes up a collision between introducing dual-channel support and
the dsi refactors. This patch applies the same dual-channel
considerations and pclk calculations to both v2 and 6G, with a bit of
abstracting for good measure.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In these cases, we want to enumerate _all_ clocks, not just the ones
that are assigned a rate.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Should work with the legacy handling in of, but we shouldn't rely on
that.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For hangs, dump copy out the contents of the buffer objects attached to the
guilty submission and print them in the crash dump report.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
HLSQ, SP and TP registers are only accessible from a special
aperture and to make matters worse the aperture is blocked from
the CPU on targets that can support secure rendering. Luckily the
GPU hardware has its own purpose built register dumper that can
access the registers from the aperture. Add a5xx specific code
to program the crashdumper and retrieve the wayward registers
and dump them for the crash state.
Also, remove a block of registers the regular CPU accessible
list that aren't useful for debug which helps reduce the size
of the crash state file by a goodly amount.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add the contents of each ringbuffer to the GPU state and dump the
data in the crash file encoded with ascii85. To save space only
the used portions of the ringbuffer are dumped.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Convert the format of the 'show' debugfs file and the crash
dump to a format resembling YAML. This should be easier to
parse and be more flexible for future changes and expansions.
v2: Use a standard .rst for the msm crashdump documentation
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Capture the GPU state on a GPU hang and store it for later playback
via the devcoredump facility. Only one crash state is stored at a
time on the assumption that the first hang is usually the most
interesting. The existing crash state can be cleared after capturing
it and then a new one will be captured on the next hang.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Do a bit of cleanup to prepare for upcoming changes to pass the
hanging task comm and cmdline to the crash dump function.
v2: Use GFP_ATOMIC while holding the rcu lock per Chris Wilson
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Convert the existing GPU show function to use the GPU state to
dump the information rather than reading it directly from the hardware.
This will require an additional step to capture the state before
dumping it for the existing nodes but it will greatly facilitate reusing
the same code for dumping a previously captured state from a GPU hang.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add the infrastructure to capture the current state of the GPU and
store it in memory so that it can be dumped later.
For now grab the same basic ringbuffer information and registers
that are provided by the debugfs 'gpu' node but obviously this should
be extended to capture a much larger set of GPU information.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a puts function for the coredump printer to bypass printf()
for constant strings for a speed boost. Reorganize the
coredump printf callback to share as much code as possible.
v2: Try to reuse code between print and puts as suggested by
Chris Wilson
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a puts() function to use seq_puts() to help speed up
up print time for constant strings.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add drm_puts() for a much faster path to print constant strings
into a drm_printer object with memcpy and friends. This can
have seconds off of really large outputs such as GPU dumps.
If the drm_printer object supports a custom puts function then
use that otherwise fall back to the slower legacy printf call.
v2: Add documentation for drm_puts() per Daniel Vetter
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[robclark fix minor htmldocs warning]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a drm printer suitable for use with the read callback for
devcoredump or other suitable buffer based output format that
isn't otherwise covered by seq_file.
v2: Add improved documentation per Daniel Vetter
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The i915 DRM driver very cleverly used ascii85 encoding for their
GPU state file. Move the encode functions to a general header file to
support other drivers that might be interested in the same
functionality.
v4: Make the return value const char * as suggested by Chris Wilson
v3: Fix error_puts -> err_puts pointed out by the 01.org bot
v2: Update API to be cleaner for the caller as suggested by Chris Wilson
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove the obsolete fb unreferencing system that is no longer used
since we've transitioned to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We no longer require a private armada_plane structure, so eliminate
it, and use the drm_plane structure directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We no longer need a private plane structure, so get rid of it. Use the
drm_plane structure directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The framebuffer base address and toggling mode needs to be updated
when the interlaced flag for mode changes is updated. Arrange to
reprogram these parameters when only the mode has changed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Write out the plane updates after the dumb frame has completed, but
just before the blank period. This allows all the plane updates to
be performed in a flicker-free non-tearing manner.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the overlay plane away from the transitional helpers and legacy
methods, and use atomic helpers instead to implement the legacy
set_plane ioctl methods.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the primary plane away from the transitional helpers, and
use the atomic helpers instead to implement the legacy set_plane
ioctl call for this plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Switch the legacy set_config() method to use the atomic modeset
helper, which allows us to get rid of the legacy dpms, prepare,
commit, mode_set, mode_set_base and disable helper methods.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Implement the atomic_enable()/atomic_disable() methods used by the
atomic modeset helpers. atomic_disable() will need some transitional
code during conversion to ensure proper ordering is maintained.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Explicitly pass in the desired enable/disable state into
armada_drm_crtc_update() rather than having it use the DPMS state
stored in our crtc structure.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Push responsibility for managing the clock during DPMS down into the
variant backend, rather than the CRTC layer having knowledge of its
state.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prepare handling for atomic modeset CRTC events. Currently, using the
transition helpers, CRTC events do not exist, but once we switch to
proper atomic modeset, they have to be handled.
We queue an event for the next vblank in two places:
- armada_drm_crtc_atomic_flush() provided we aren't doing an
atomic modeset.
- armada_drm_crtc_commit() if we are committing a modeset.
This ensures that the event is sent at the correct time (after all
updates have been written to the hardware and after the following
vblank.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than writing all bits of SPU_ADV_REG on modeset, only write
what we need to change, and initialise the register in the variant
initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Update debug to use KMS level, and print the mode using the standard
format for mode lines, but print the adjusted CRTC parameters as
that's what we will be programming for.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
For atomic modeset, we need to set the sync signal polarities from the
CRTC state structure rather than the legacy mode structure stored in
CRTC. In any case, we should update this from our mode_set_nofb()
method, rather than the commit() method. Move it there, and ensure
that armada_drm_crtc_update() will not overwrite these bits.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Push the interlaced frame calculation down into armada_drm_plane_calc()
which needs to apply the same correction for both the overlay and
primary planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Provide the framebuffer pitches from armada_drm_plane_calc_addrs() as
well as the base addresses for each plane. Since this is now about
more than just addresses, rename to armada_drm_plane_calc().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_calc_addrs() gets all its information from the plane
state, so it makes sense to pass the plane state pointer down into this
function, rather than extracting the information in identical ways,
sometimes a couple of layers up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the armada_drm_mode_config_funcs to armada_drv.c, since this now
has less to do with FBs than it does with general mode configuration.
In doing so, we need to make armada_fb_create() visible to armada_drv.c,
which reveals a function name clash with armada_fbdev.c. Rename the
version in armada_fbdev.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the DRM standard plane properties for specifying the YUV
colour encoding parameter. Our colour range is fixed at limited
range.
Since we are transitioning to atomic modeset, we need to explicitly
add handling of these properties to our atomic_set_property() method,
but once the transition is complete, these will be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the unused CRTC colourspace properties - userspace does not make
use of these. In any case, these are not a property of the CRTC, since
they demonstrably only affect the video (overlay) plane, irrespective
of the format of the graphics (primary) plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane colorkey properties into the plane state,
keeping the existing driver behaviour to avoid breaking userspace.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the contrast, brightness, and saturation properties to the overlay
plane state structure, and call our overlay commit function to update
the hardware via the planes atomic_update() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than tracking the register state, we can now check the previous
state and decide which registers need updating from that since the old
plane state indicates the previous state which was programmed into the
hardware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer. Using the transitional helper would
make the call block, which would introduce a performance regression.
Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do. Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the primary plane as a whole to use its atomic state and the
transitional helpers. The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reset the atomic state of any converted components during driver
initialisation to ensure that we have the atomic state initialised for
any component converted to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code. This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks. This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler. These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_pfn() returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_pfn() will replace this
inefficiency by returning VM_FAULT_* type.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently, vkms shows an error message if the following steps occur: (1)
load vkms, (2) perform any specific operation in the vkms (e.g., run an
IGT test), and (3) unload the module. The following error message
emerges:
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Virtual-1 leaked!
This commit fixes this error by calling drm_atomic_helper_shutdown()
before drm_mode_config_cleanup, which turns off the whole display
pipeline and remove a reference related to any connector.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719004045.hzepp565x5lfco3c@smtp.gmail.com
This patch cleans up spaces and align the text to refine the comment for
amdgpu_ttm.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass the evict flag instead of hard code
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Every set_pages_array_wb call resulted in cross-core
interrupts and TLB flushes. Merge more of them for
less overhead.
This reduces the time needed to free a 1.6 GiB GTT WC
buffer as part of Vulkan CTS from ~2 sec to < 0.25 sec.
(Allocation still takes more than 2 sec though)
(v2): use set_pages_wb instead of set_memory_wb.
Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc.c.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc_dma.c.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle cases where one or more instance of the IP
block may be harvested.
v2: make sure ip_num_rings is initialized amdgpu_queue_mgr.c
v3: rebase on Christian's UVD changes, drop unused var
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This structure needs to align with structure in atomfirmware table.
Update it.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR_SET command is sent to the microcontroller in order to initialize
parameters needed for PSR feature, such as telling the microcontroller
which pipe is driving the PSR supported panel. When this command is
skipped or fails, the microcontroller may program the wrong thing if
driver tries to enable PSR.
[How]
If PSR_SET fails, do not set psr_enable flag to indicate the feature is
not yet initialized.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The sequence is slightly changed when bring .set_bandwidth out
from the end of programming backend to the end of programming
surface. Vega10 doesn't like to get clocks updated if
stream_count is zero in the current context (Atomic Reset).
[How]
Do not update clocks if no stream is showing up in the context.
Fixes 1b2b130192 "dc: Remove 300Mhz minimum disp clk limit."
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
engine and aux_engine are unnecessary layers we want to remove this
layer.
[How]
flatten engine and aux engine structs into one struct called
aux_engine and remove all references to the engine struct.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some receivers seem to fail the first link training but are good on
subsequent tries. We want to retry link training again. This fixes
HTC vive pro not lighting up after being disabled.
[How]
Check if the link training passed without fall back if this is not
the case then we retry link training.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Patch the IBs for the second UVD instance so that userspace don't need
to care about the instance they submit to.
v2: use direct IB patching
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to need that for the second UVD instance on Vega20.
v2: rename to patch_cs_in_place
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
-----BEGIN PGP SIGNATURE-----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=EhHj
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged
Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
Add support for TI's sn65dsi86 dsi2edp bridge chip.
The chip converts DSI transmitted signal to eDP signal,
which is fed to the connected eDP panel.
This chip can be controlled via either i2c interface or
dsi interface. Currently in driver all the control registers
are being accessed through i2c interface only.
Also as of now HPD support has not been added to bridge
chip driver.
Changes in v1:
- Split the dt-bindings and the driver support into separate patches
(Andrzej Hajda).
- Use of gpiod APIs to parse and configure gpios instead of obsolete ones
(Andrzej Hajda).
- Use macros to define the register offsets (Andrzej Hajda).
Changes in v2:
- Separate out edp panel specific HW resource handling from bridge
driver and create a separate edp panel drivers to handle panel
specific mode information and HW resources (Sean Paul).
- Replace pr_* APIs to DRM_* APIs to log error or debug information
(Sean Paul).
- Remove some of the unnecessary structure/variable from driver (Sean
Paul).
- Rename the function and structure prefix "sn65dsi86" to "ti_sn_bridge"
(Sean Paul / Rob Herring).
- Remove most of the hard-coding and modified the bridge init sequence
based on current mode (Sean Paul).
- Remove the existing function to retrieve the EDID data and
implemented this as an i2c_adapter and use drm_get_edid() (Sean Paul).
- Remove the dummy irq handler implementation, will add back the
proper irq handling later (Sean Paul).
- Capture the required enable gpios in a single array based on dt entry
instead of having individual descriptor for each gpio (Sean Paul).
Changes in v3:
- Remove usage of irq_gpio and replace it as "interrupts" property (Rob
Herring).
- Remove the unnecessary header file inclusions (Sean Paul).
- Rearrange the header files in alphabetical order (Sean Paul).
- Use regmap interface to perform i2c transactions.
- Update Copyright/License field and address other review comments
(Jordan Crouse).
Changes in v4:
- Update License/Copyright (Sean Paul).
- Add Kconfig and Makefile changes (Sean Paul).
- Drop i2c gpio handling from this bridge driver, since i2c sda/scl gpios
will be handled by i2c master.
- Update required supplies names.
- Remove unnecessary goto statements (Sean Paul).
- Add mutex lock to power_ctrl API to avoid race conditions (Sean
Paul).
- Add support to parse reference clk frequency from dt(optional).
- Update the bridge chip enable/disable sequence.
Changes in v5:
- Fixed Kbuild test service reported warnings.
Changes in v6:
- Use PM runtime based ref-counting instead of local ref_count mechanism
(Stephen Boyd).
- Clean up some debug logs and indentations (Sean Paul).
- Simplify dp rate calculation (Sean Paul).
- Add support to configure refclk based on input REFCLK pin or DACP/N
pin (Stephen Boyd).
Changes in v7:
- Use static supply entries instead of dynamic allocation (Andrzej
Hajda).
- Defer bridge driver probe if panel is not probed (Andrzej Hajda).
- Update of_graph APIs for correct node reference management. (Andrzej
Hajda).
- Remove local display_mode object (Andrzej Hajda).
- Remove version id check function from driver.
Changes in v8:
- Move dsi register/attach function to bridge driver probe (Andrzej
Hajda).
- Introduce a new helper function to write 16bit words into consecutive
registers (Andrzej Hajda).
- Remove unnecessary macros (Andrzej Hajda).
Changes in v9:
- Remove dsi register/attach from bridge probe, since dsi dev register
completion also waits for any panel or bridge to get added. This creates
deadlock situation when bridge driver calls dsi dev register and
attach before bridge add, in its probe function.
- Fix issues faced during testing of bridge driver on actual HW.
- Remove unnecessary initializations (Stephen Boyd).
- Use local refclk lut size instead of global macro (Sean Paul).
Changes in v10:
- Use refclk to determine if continuous dsi clock is needed or not.
Changes in v11:
- Read DPPLL_SRC register to determine continuous clock instead of
using refclk handle (Stephen Boyd).
Changes in v12:
- Explain in comment as in why dsi dev registration is done in
bridge_attach (Andrzej Hajda).
- Move HPD disable to bridge_pre_enable (Andrzej Hajda).
- Make panel/DDC exclusive until HPD support is added (Andrzej Hajda).
Changes in v13:
- eDP panels report EDID via DP-AUX channel, so remove support for
dedicated DDC line (Andrzej Hajda).
Changes in v14:
- Remove unnecessary drm_panel checks (Andrzej Hajda).
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532069642-21392-1-git-send-email-spanda@codeaurora.org
- Change g2d driver to component based driver
. g2d driver was last customed sub driver so this patch series
changes it to component based driver, which also makes gem handling
to be more simplify.
- Cleanup of Exynos DRM suspend/resume
. Register exynos drm core suspend/resume functions
to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
callbacks to ensure exynos_drm_suspend() is called before any suspend
callback from the real devices to avoid some issues on boards with
complex pipelines.
. Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
to ensure that resources of each devices will be released
for the system PM suspend/resume cycle.
- Remove local value not used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h0gl
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Cleanups
- Change g2d driver to component based driver
. g2d driver was last customed sub driver so this patch series
changes it to component based driver, which also makes gem handling
to be more simplify.
- Cleanup of Exynos DRM suspend/resume
. Register exynos drm core suspend/resume functions
to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
callbacks to ensure exynos_drm_suspend() is called before any suspend
callback from the real devices to avoid some issues on boards with
complex pipelines.
. Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
to ensure that resources of each devices will be released
for the system PM suspend/resume cycle.
- Remove local value not used.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com
- Remove the unused struct imx_drm_crtc and the unused pipes field
from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
necessary to support writing captured bottom-top interlaced
fields to memory with interleaved lines.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G7LxgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsBNlQD9FofVPjKCFW79jy/H2bf+hWVB
uGhLAxfSsHmLLUSi7Z8A/jFtafSMQDU8uNNbTTHNjofKiFqdjpUljCUgTuA1paUC
=oPJE
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: cleanup and csi improvements
- Remove the unused struct imx_drm_crtc and the unused pipes field
from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
necessary to support writing captured bottom-top interlaced
fields to memory with interleaved lines.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
necessary to guarantee correct LVDS signals in case the bootloader
left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
dual-channel mode. In this mode, the second LVDS channel can not be
used separately. If the second channel is correctly described as
disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
to capture progressive frames in that case.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G4zRgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsCZSgEAhIjcChl3NqsgqDzs4H1Pj+42
WS0OAHA6FSo5Jt1mthoA/jUbHp3tpEu1S4z1bUm3Hi5cifmZX2Jg/QLjsF4hzewK
=6eNq
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: imx-drm ldb and ipu-v3 csi fixes
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
necessary to guarantee correct LVDS signals in case the bootloader
left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
dual-channel mode. In this mode, the second LVDS channel can not be
used separately. If the second channel is correctly described as
disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
to capture progressive frames in that case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100423.3438.8.camel@pengutronix.de
The vblank on/off calls were missing in dpu_crtc
leading to "driver forgot to call drm_crtc_vblank_off()"
warning while entering suspend state.
Also handle the state update completion event for
a crtc being disabled in current atomic commit.
This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).
MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).
The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):
MDSS
+---------------------------------+
| +-----------------------------+ |
| | DPU | |
| | +--------+ +--------+ | |
| | | SSPP | | SSPP | | |
| | +----+---+ +----+---+ | |
| | | | | |
| | +----v-----------v---+ | |
| | | Layer Mixer (LM) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | PingPong (PP) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | INTERFACE (VIDEO) | | |
| | +---+----------------+ | |
| +------|----------------------+ |
| | |
| +------|---------------------+ |
| | | DISPLAY PERIPHERALS | |
| | +---v-+ +-----+ | |
| | | DSI | | DP | | |
| | +-----+ +-----+ | |
| +----------------------------+ |
+---------------------------------+
The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.
Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
capable of performing format conversion, scaling and quality improvement
for source surfaces.
* Layer Mixer (LM):
Blend source surfaces together (in requested zorder)
* PingPong (PP):
This block controls frame done interrupt output, EOL and EOF generation,
overflow/underflow control.
* Display interface (INTF):
Timing generator and interface connecting the display peripherals.
DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs
Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
- Dual pipe: Output from two LMs combined to single display.
- Split display: Output from two LMs connected to two separate
interfaces.
The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.
Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Used by the dpu driver for custom suspend/resume.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Called right before wait_for_commit_done() to perform kickoff for
active crtcs.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu uses these elsewhere in the driver (in addition to increasing
MAX_PLANES, that'll come later), so pull them out into #define.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pulled this out of the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This simplifies cleanup, to make sure nothing drops out in case of
error.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split out of dpu megapatch and renamed labels]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Useful for incoming DPU support
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this from the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
I missed this during the atomic conversion
Changes in v3:
- None
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Make the pclk_rate u64 to accommodate higher pixel clock
rates.
Changes in v3:
- Converted pclk_rate to u32 (Archit)
- Rebase on dsi cleanup set in msm-next
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Enable drm core zpos normalization for planes.
Changes in v3:
- None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
SoCs having mdp5 or dpu have identical tree like
device hierarchy where MDSS top level wrapper manages
common power resources for all child devices.
Subclass msm_mdss so that msm_mdss includes common defines
and mdp5/dpu mdss derivations to include any extensions.
Add mdss helper interface (msm_mdss_funcs) to msm_mdss
base for mdp5/dpu mdss specific implementation calls.
This change subclasses msm_mdss for mdp5, dpu specific
changes will be done separately.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
[seanpaul rebased on msm-next and resolved conflicts]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU doesn't use this, so push it into the mdp drivers.
Changes in v3:
- None
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently, DRM bridge for DPU relies on the default video
mode setting to set the encoder mode.
Add an explicit call to set the encoder mode for bridges.
Changes in v3:
- None
Reviewed-by: Archit Taneja <architt@codeauorora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
postdiv_lock spinlock was used before initialization
for 10nm pll. It causes following spin_bug:
"BUG: spinlock bad magic on CPU#0".
Initialize spinlock before its usage.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Current DSI driver uses two connectors for dual DSI case even
though we only have one panel. Fix this by implementing one
connector/bridge for dual DSI use case. Use master DSI
controllers to register one connector/bridge.
Changes in v3:
- None
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
[seanpaul removed unused local var causing a build warning]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.
Changes in v3:
- Added Archit's R-b
- Rebase on dsi cleanup set in msm-next
Cc: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
(cherry picked from commit 90c3e21987)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The address printed is the actual address, not the page.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make struct amdgpu_bo a bit smaller.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just rename functions, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Going to completely rework the context to ring mapping with Nayan's GSoC
work, but for now just stopping to expose the second UVD instance should
do it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to bitcast a boolean and even if we should use "!!" instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
drm_atomic_helper_async_check() declares the plane, old_plane_state and
new_plane_state variables to iterate over all planes of the atomic
state and make sure only one plane is enabled.
Unfortunately gcc is not smart enough to figure out that the check on
n_planes is enough to guarantee that plane, new_plane_state and
old_plane_state are initialized.
Explicitly initialize those variables to NULL to make gcc happy.
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133300.32023-1-boris.brezillon@bootlin.com
Async plane update is supposed to work only when updating the FB or FB
position of an already enabled plane. That does not apply to requests
where the plane was previously disabled or assigned to a different
CTRC.
Check old_plane_state->crtc value to make sure async plane update is
allowed.
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133215.31917-1-boris.brezillon@bootlin.com
After enabling DSC we need to send compression mode command packet
and pps data packet, for which 2 new data types are added
07h Compression Mode Data Type Write , short write, 2 parameters
0Ah PPS Long Write (word count determines number of bytes)
This patch adds support to send these packets.
Cc: David Airlie <airlied@linux.ie>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Changes in v3:
- None
Signed-off-by: vkorjani <vikas.korjani@intel.com>
[seanpaul removed pps_write_buffer fn, added types to packet_format helpers]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
modesetting X11 driver may provide negative x/y cordinates in
mdp5_crtc_cursor_move call when rotation is enabled.
Cursor buffer can overlap down to its negative width/height.
ROI has to be recalculated for negative x/y indicating using the
lower/right corner of the cursor buffer and hotspot must be set
in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X.
Signed-off-by: Carsten Behling <carsten.behling@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Replace version checks with the helper functions bound to
cfg_handler for DSI v2, DSI 6G 1.x and DSI 6G v2.0+ controllers
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add dsi host helper function implementation for DSI v2
DSI 6G 1.x and DSI 6G v2.0+ controllers
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add dsi host helper functions support for DSI v2 and DSI 6G 1.x
controllers that are under version checks
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
f9cb8d8d83 fixed various race conditions with CTL flush, in particular
flushing and sending the START signal before encoder state was updated.
But it did this a little too well in some cases that don't trigger
encoder->enable(), and CTL[n].FLUSH would never be set. When page flips
happen it would paper over the bug, since the first plag flip would
flush out the state to the hardware.
The issue could be reproduced with, for example, modetest (without the
'-v' argument).
Fixes: f9cb8d8d83 drm/msm/mdp5: rework CTL START signal handling
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Experimentation shows that resuming power quickly after suspending
ends up forcing a system hang for unknown reasons on 5xx targets.
To avoid cycling the power too much (especially during init)
turn up the autosuspend time for a5xx to 250ms and use
pm_runtime_put_autosuspend() when applicable.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When a msm8016 based system is woken up from suspend, the firmware in
the adreno device hangs.
[ 83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1
[ 85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0!
[ 85.853661] msm 1a00000.mdss: A306: completed fence: 370
[ 85.859073] msm 1a00000.mdss: A306: submitted fence: 372
[ 85.865113] msm 1a00000.mdss: A306: hangcheck recover!
Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume
as sleep ops.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
To make suspend and resume work on msm8916 platforms, call into the generic
helpers and preserve the state across suspends.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
confusing as to which part of debug is informational, and which part causes behavioral change
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.
[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Diags has POR to run the video workload using AYCRCB8888 through DCN;
capture it through DWB and send it to VCN hardware to encode
[how]
added the code to support this format so that DPP ICSC will be able to
convert it from YUV444 to internal RGB and DWB OCSC will be able to
convert from internal RGB to YUV420
Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When a dce100 asic was suspended, the clocks were not set to 0.
Upon resume, the new clock was compared to the existing clock,
they were found to be the same, and so the clock was not set.
This resulted in a pernicious blackscreen.
[How]
In atomic commit, check to see if there are any active pipes.
If no, set clocks to 0
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
diag specify what the full config and is only concerned about pass/fail at the end
having inter-op code like verifiying we can actually train at reported link rate
slows down diag test and add complexity we don't need
[how]
add dc_debug option to skip capability link trianing
also remove hbr in function name as verify is not specific to hbr
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Ken Chalmers <ken.chalmers@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The warning message floods the dmesg log on Tonga even
though it is expected to have a pix_clk set to zero,
when the pipe is not active.
[how]
remove the assert
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves amdgpu_fbdev_set_suspend() to the beginning
of suspend sequence.
This is to ensure fbcon does not to write to the VRAM
after GPU is powerd down.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The warning turned out to be not so useful, as BO destruction tends to
be deferred to a workqueue.
Also, we should be preventing any damage from this now, so not really
important anymore to fix code doing this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise there may be potential SMU performance issues.
v2: fix commit description and coding style
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Slow switch for UCLK when there is multiple displays and they are
not in sync.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were testing the register offset, instead of the value stored in the
register, therefore always timing out the loop.
This reduces suspend time of the system in the bug report below by ~600
ms.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/107277
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
R40 TV TCON is basically the same as on A83T. However, it needs special
handling, because it has to set up TCON TOP muxes at runtime.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-14-jernej.skrabec@siol.net
Till now, new way of matching engines with TCONs was reading their
respective ids and match them by those ids. However, with introduction
of TCON TOP, that might not be so straightforward anymore.
- there might be more TCONs that engines (mixers)
- TCON ids might have non-consecutive ids
Workaround that by matching mixer id with TCON index from TCON list.
For example, R40 has 2 mixers and 4 TCONs. Board designer can choose
2 outputs, which are connected to any of those 4 TCONs. As long as there
are only 2 TCONs enabled in DT, using index in list as alternative id,
will allow to match them with mixer 0 and 1.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-13-jernej.skrabec@siol.net
Remove local variable 'priv' to fix GCC warning:
drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize':
drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for
all drivers for the real Exynos DRM hardware modules. This ensures that
the resources will be released for the system PM suspend/resume cycle.
Exynos DRM core already takes care of suspending the whole display pipeline
before PM callbacks of the real devices are called.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In the current code, exynos_drm_suspend() function is called after all
real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM
virtual platform device is created as last device in the system (as
a part of DRM registration). None of the devices for real hardware
modules has its own system suspend/resume callbacks, so it doesn't
change any order of the executed code, but it has a side-effect:
runtime PM callbacks for real devices are not executed, because those
devices are considered by PM core as already suspended. This might
cause issues on boards with complex pipelines, where something
depends on the runtime PM state of the given device.
To ensure that exynos_drm_suspend() is called before any suspend
callback from the real devices, assign it to .prepare callback. Same
for exynos_drm_resume(), using .complete callback ensures that all
real devices have been resumed when calling it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The virtual Exynos DRM device has no runtime PM enabled, so checking
for its runtime suspended state is useless.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use recently introduced common helpers to unify GEM handling code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler
function exynos_drm_gem_get(). This lets the caller to get access to
exynos_drm_gem object and extract any information about GEM object
without searching object tree for getting each parameter.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos G2D driver is the last client of the custom Exynos 'sub-driver'
framework. In the current state it doesn't really resolve any of the
issues it has been designed for, as Exynos DRM is already built only
as a single kernel module. Remove the custom 'sub-driver' framework and
simply use generic component framework also in G2D driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+7bq
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717110927.30776-1-tzimmermann@suse.de
Set possible_clones field to report that the writeback connector and
the one driving the display could be enabled at the same time.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Older version of this patch series reported writeback as disconnected
to avoid confusing userspace not aware of writeback connectors.
However, the version that got merged uses a special cap
(DRM_CLIENT_CAP_WRITEBACK_CONNECTORS) for this purpose.
This helps us avoid some special handling of writeback connector
in drm_helper_probe_single_connector_modes, see [1].
https://lists.freedesktop.org/archives/dri-devel/2018-July/183144.html
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Dan Carpenter has reported that there is the following static checker
warning:
drivers/gpu/drm/drm_prime.c:317 drm_gem_map_dma_buf()
warn: 'sgt' can also be NULL
314 sgt = obj->dev->driver->gem_prime_get_sg_table(obj);
315
316 if (!IS_ERR(sgt)) {
317 if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
Problematic functions are xen_drm_front_gem_get_sg_table and
drm_gem_cma_prime_get_sg_table. Fix those by replacing NULL with error value.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719093713.3643-1-andr2000@gmail.com
Pull vfs fixes from Al Viro:
"Fix several places that screw up cleanups after failures halfway
through opening a file (one open-coding filp_clone_open() and getting
it wrong, two misusing alloc_file()). That part is -stable fodder from
the 'work.open' branch.
And Christoph's regression fix for uapi breakage in aio series;
include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel
definition of sigset_t, the reason for doing so in the first place had
been bogus - there's no need to expose struct __aio_sigset in
aio_abi.h at all"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: don't expose __aio_sigset in uapi
ocxlflash_getfile(): fix double-iput() on alloc_file() failures
cxl_getfile(): fix double-iput() on alloc_file() failures
drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
Use the newly split ip suspend functions to do suspend displays
first (to deal with atomic so that FBs can be unpinned before
attempting to evict vram), then evict vram, then suspend the
other IPs. Also move the non-DC pinning code to only be
called in the non-DC cases since atomic should take care of
DC.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107065
Fixes: e00fb85 drm: Stop updating plane->crtc/fb/old_fb on atomic drivers
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases. Do DCE first
to deal with atomic, then do the rest.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the supported functions mask before calling the bios
requests method.
Reviewed-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
amdgpu_ttm_set_buffer_funcs_status destroys adev->mman.entity on suspend
without releasing adev->mman.bdev.man[TTM_PL_VRAM].move fence
so on resume the new drm_sched_entity.fence_context causes
the warning against the old fence context which is different.
Fix:
When destroying sched_entity in amdgpu_ttm_set_buffer_funcs_status
release man->move and set the pointer to NULL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes the usage of console_(un)lock
by replacing drm_fb_helper_set_suspend() to
drm_fb_helper_set_suspend_unlocked() which locks and
unlocks the console instead of locking ourselves.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except special naming as *_in_khz, The default clock unit in powerplay
is in 10KHz. so need to * 10 as expecting clock frequency in display
is in kHz.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can fix the issue resume from S3, the user's OD setting
were reverted to default.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the vddc limit before read them from vbios
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While the console_lock is held, console output will be buffered, till
its unlocked it wont be emitted, hence its ideal to unlock sooner to enable
debugging/detecting/fixing of any issue in the remaining sequence of events
in resume path.
The concern here is about consoles other than fbcon on the device,
e.g. a serial console
[How]
This patch restructures the console_lock, console_unlock around
amdgpu_fbdev_set_suspend() and moves this new block appropriately.
V2: Kept amdgpu_fbdev_set_suspend after pci_set_power_state
V3: Updated the commit message to clarify the real concern that this patch
addresses.
V4: code clean-up.
V5: fixed return value
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We were only setting this mask for DCN, but should really use it
universally for all ASICs.
[How]
Move the assignment out of the Raven switch statement for all ASICs
other than Stoney and Carrizo.
v2: Keep stutter always on for Carrizo and Stoney (Alex)
Cc: Rex.Zhu@amd.com
Cc: Feifei.Xu@amd.com
Cc: Kenneth.Feng@amd.com
Cc: Evan.Quan@amd.com
Cc: Bhawanpreet.Lakha@amd.com
Cc: Jordan.Lazare@amd.com
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are only ever called for non-DC code.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial fix to spelling mistake in dev_err error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
-----BEGIN PGP SIGNATURE-----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=HyBh
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
The whole handle, filp and entity handling is superfluous here.
We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.
v2: fix one more missed case in amdgpu_uvd_suspend
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure what that was every used for, but now it is completely unused.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'result' is not initialized correctly. It causes the API
return an error code even on success.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.
Rewiewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull the generic drm_audio_component support, which will be used later
for AMD/ATI and other HD-audio HDMI codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kees Cook