The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-17-jic23@kernel.org
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
-----BEGIN PGP SIGNATURE-----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=IcsE
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
iio: adc: xilinx-xadc: Make use of device properties
iio: light: cm32181: Add PM support
iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: stm32-adc: disable adc before calibration
iio: adc: stm32-adc: make safe adc disable
iio: dac: ad5380: align '*' each line and drop unneeded blank line
iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
iio: Don't use bare "unsigned"
dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
iio: dac: mcp4922: add support to mcp4921
iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
iio: adc: stm32-adc: Use generic_handle_domain_irq()
proximity: vl53l0x: Make VDD regulator actually optional
MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
iio: gyro: bmg160: Fix typo in comment
...
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
-----BEGIN PGP SIGNATURE-----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=AtPS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
The driver should disable regulators when fails at regmap_update_bits().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Updated the comment to 'may' require.
Fixes: a0701b6263 ("iio: gyro: add core driver for fxas21002c")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-76-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes tag is inaccurate but unlikely anyone will be interested in
backporting beyond that point.
Fixes: 53ac8500ba ("staging:iio:adxrs450: Move header file contents to main file")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-75-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes: 8e67875141 ("staging:iio:gyro: adis16130 cleanup, move to abi and bug fixes.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-74-jic23@kernel.org
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes tag is inaccurate but unlikely anyone will backport this
beyond that point so I haven't chased the history futher than 2013.
Fixes: 3c80372dae ("staging:iio:adis16080: be16 cleanups")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-73-jic23@kernel.org
Using this approach as opposed to CONFIG_PM guards allows the compiler to
remove the unused code instead of doing it manually.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220220175149.503495-3-jic23@kernel.org
This driver is built as a single module. There is an note in the makefile
about SPI support being a reason to split the build in future. That
support has never arrived so drop these symbol exports.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220220175149.503495-2-jic23@kernel.org
This function (up to now) returns zero unconditionally, so there isn't
any benefit of returning a value. Make it return void to be able to see
at a glance that the return value of mpu3050_i2c_remove is always zero.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220425191735.59032-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20220413131513.59258-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
While at it, reuse temporary device pointer in the same function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220413163004.84789-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Among all the users of the kfifo buffers, no one uses the
INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and
simplify a little bit the internals - overall the documentation - by
eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by
default with kfifo buffers, which will basically mimic what all the "non
direct" modes do.
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jyoti Bhayana <jbhayana@google.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
An odr_lock has been introduced to protect local accesses to the odr
internal cache and ensure the cached value always reflected the actual
value. Using the mlock() for this purpose is no longer needed, so let's
drop these extra mutex_lock/unlock() calls.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-8-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As there is no cleanup to do, let's return as early as possible in the
various ST sensor drivers _write_raw() callback functions.
There is no functional change.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-5-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
-----BEGIN PGP SIGNATURE-----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=UnWv
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...
In order to avoid unneessary pollution of the global symbol namespace
move the common/library functions into a specific namespace and import
that into the various specific device drivers that use them.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-9-jic23@kernel.org
In order to avoid unnecessary pollution of the global symbol namespace
move the common/library functions into a specific namespace and import
that into the various specific device drivers that use them.
For more information see https://lwn.net/Articles/760045/
Both the exports used between the two common modules and the individual
drivers are moved to a single namespace as greater granularity does
not feel useful.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-6-jic23@kernel.org
To avoid unnecessary pollution of the global symbol namespace move the
driver core and type specific core exports into their a new namespace
and import that where needed.
For more info see https://lwn.net/Articles/760045/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Link: https://lore.kernel.org/r/20220116180535.2367780-14-jic23@kernel.org
The core module and type specific core modules are made up of
several files. There is no benefit in duplicating the MODULE_* macros
in each file so remove them.
Noticed whilst adding MODULE_IMPORT_NS() as I missed some files and
it still worked, making it clear not all of these blocks were needed.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220116180535.2367780-13-jic23@kernel.org
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fix this problem for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553.
Fixes: 7d0ead5c3f ("iio: Reconcile operation order between iio_register/unregister and pm functions")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch makes I2C and SPI interface drivers for STMicroelectronics
sensor chips individually selectable via Kconfig.
The default is kept unchanged - I2C and SPI interface drivers are still
selected by default if the corresponding bus support is available.
However, the patch makes it possible to explicitly disable drivers
that are not needed for a particular target.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Properly sign-extend the rate and temperature data.
Fixes: 2c8920fff1 ("iio: gyro: Add driver support for ADXRS290")
Signed-off-by: Kister Genesis Jimenez <kister.jimenez@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115104147.18669-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO trigger handlers must call iio_trigger_notify_done() when done. This
must be done even when an error occurred. Otherwise the trigger will be
seen as busy indefinitely and the trigger handler will never be called
again.
The itg3200 driver neglects to call iio_trigger_notify_done() when there is
an error reading the gyro data. Fix this by making sure that
iio_trigger_notify_done() is included in the error exit path.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101144055.13858-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix a set of closely related issues.
1. When using fifo_values() there was not enough space for the timestamp to
be inserted by iio_push_to_buffers_with_timestamp()
2. fifo_values() did not meet the alignment requirement of
iio_push_to_buffers_with_timestamp()
3. hw_values did not meet the alignment requirement either.
1 and 2 fixed by using new iio_push_to_buffers_with_ts_unaligned() which has
no alignment or space padding requirements.
3 fixed by introducing a structure that makes the space and alignment
requirements explicit.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210613151039.569883-4-jic23@kernel.org
There is nothing else that needs to be done for this driver. The remove
hook calls only the iio_device_unregister() hook.
So this driver can use devm_iio_device_register() directly.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210913115308.301877-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit b1fe0cf06f ("Input: delete MPU3050 driver") deletes the superseded
MPU3050 driver and its corresponding config INPUT_MPU3050.
The dependencies on the superseding driver in ./drivers/iio/gyro/Kconfig
to ensure that the two drivers are not built into the same kernel is a dead
dependency and not required anymore.
So, remove those config dependencies on INPUT_MPU3050 for MPU3050_I2C.
This issue was detected with ./scripts/checkkconfigsymbols.py.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210817081330.9645-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The idea behind it, is that all devm_ calls in ST sensors are bound to the
parent device object.
However, the reference to that object is kept on both the st_sensor_data
struct and the IIO object parent (indio_dev->dev.parent).
This change only adds a bit consistency and uses the reference stored on
indio_dev->dev.parent, to enforce the assumption that all ST sensors' devm_
calls are bound to the same reference as the one store on st_sensor_data.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-6-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
At this point all ST driver remove functions do iio_device_unregister().
This change removes them from them and replaces all iio_device_register()
with devm_iio_device_register().
This can be done in a single change relatively easy, since all these remove
functions are define in st_sensors.h.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-5-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the st_sensors_power_enable() function to use
devm_add_action_or_reset() handlers to register regulator_disable hooks for
when the drivers get unloaded.
The parent device of the IIO device object is used. This is based on the
assumption that all other devm_ calls in the ST sensors use this reference.
This makes the st_sensors_power_disable() un-needed.
Removing this also changes unload order a bit, as all ST drivers would call
st_sensors_power_disable() first and iio_device_unregister() after that.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-4-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the st_sensors_allocate_trigger() to use
device-managed functions.
The parent device of the IIO device object is used. This is based on the
assumption that all other devm_ calls in the ST sensors use this reference.
That makes the st_sensors_deallocate_trigger() function un-needed, so it
can be removed.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-3-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up until commit ea7e586bdd ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.
In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.
This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.
Fixes: 774487611c ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_gyro_allocate_ring() function calls iio_triggered_buffer_setup() to
allocate a triggered buffer.
But the same can be done with devm_iio_triggered_buffer_setup() and then
the st_gyro_common_remove() no longer needs to manually deallocate it.
We know that the parent of the IIO device is used to manage other instances
of the devm unwind, so it can be used in the st_gyro_allocate_ring() as
well.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210720074642.223293-4-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st-sensors drivers have changed in structure over time, and includes
have not always kept up with this. Let's bring them back to nearer
the ideal.
Identified with the include-what-you-use tool and careful checking of
its suggestions.
Note I haven't been particularly aggressive here, so this is just the
cases where the include obviously isn't needed rather than the more
subtle corners.
Note I took the opportunity to add mod_devicetable.h as I generally
prefer to see that when acpi or of match tables are present.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210608175149.4019289-1-jic23@kernel.org
Some HID drivers use devm_kmemdup() already to clone the template IIO
channels information and update it.
However, there are still some drivers that kmemdup() and kfree() the
channels.
This change converts them to use devm_kmemdup() and bind the life-time of
this allocated object to the parent device object (in these drivers).
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210630123029.759609-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
General driver churn doesn't always include updates of header includes.
Manual review of the output of the include-what-you-use checker lead to the
following cleanup. Hopefuly this brings things back to a good state for the
hid-sensor drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210608205510.4033887-1-jic23@kernel.org
A namespace for exported symbols makes clear who is a provider
and who is a consumer of the certain resources. Besides that,
it doesn't pollute the common namespace.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210614162447.5392-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
-----BEGIN PGP SIGNATURE-----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=Zved
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
iio: adis: Cleanout unused headers
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
counter: Add support for Intel Quadrature Encoder Peripheral
staging: iio: cdc: ad7746: extract capac setup to own function
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: remove ordinary comments
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: chemical: sgp30: Drop use of %hx in format string.
iio: gyro: st_gyro: Support mount matrix
iio: magnetometer: st_magn: Support mount matrix
iio: accel: st_sensors: Stop copying channels
iio: accel: st_sensors: Support generic mounting matrix
...
0-day recently added the include-what-you-use header checker and
it gave a warning on an adis patch. As such I decided to
run it on all the adis drivers and see if it made sensible suggestions.
Note this doesn't represent a complete list of what it suggested changing
as I filtered out a few on the basis they are standard headers used to
effectively include a bunch of other headers.
Could split this into a patch per driver if people prefer.
Note to anyone else trying this tool is that it is somewhat
of a loose cannon so you will be wanting to carefully check any
suggestions before proposing patches!
I thought about also reorganising the headers whilst here, but
that would make this patch harder to read, or lead to another rather
noisy patch across most of the files.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210603193616.3708447-1-jic23@kernel.org
Add support to read and present the mounting matrix on ST gyroscopes.
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210518230722.522446-5-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis lib lock helpers to lock the device. This makes things
consistent with other users of the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210520115909.466275-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis lib lock helpers to lock the device. This makes things
consistent with other users of the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210520115909.466275-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All of the users of iio_read_mount_matrix() are using the very same
property name. Moreover, the property name is hard coded in the API
documentation.
Make this clear and avoid duplication now and in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210518112546.44592-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If we fail to read temperature or axis we need to decrement the
runtime pm reference count to trigger autosuspend.
Add the call to pm_put to do that in case of error.
Fixes: a0701b6263 ("iio: gyro: add core driver for fxas21002c")
Suggested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/linux-iio/CBBZA9T1OY9C.2611WSV49DV2G@arch-thunder/
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Uwe Kleine-König