Commit Graph

366 Commits

Author SHA1 Message Date
Andi Kleen 3d26dcf767 kernel/sys.c: clean up sys_shutdown exit path
Impact: cleanup, fix

Clean up sys_shutdown() exit path.  Factor out common code.  Return
correct error code instead of always 0 on failure.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Ingo Molnar f541ae326f Merge branch 'linus' into perfcounters/core-v2
Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-06 09:02:57 +02:00
Linus Torvalds 8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Oleg Nesterov 1b0f7ffd0e pids: kill signal_struct-> __pgrp/__session and friends
We are wasting 2 words in signal_struct without any reason to implement
task_pgrp_nr() and task_session_nr().

task_session_nr() has no callers since
2e2ba22ea4, we can remove it.

task_pgrp_nr() is still (I believe wrongly) used in fs/autofsX and
fs/coda.

This patch reimplements task_pgrp_nr() via task_pgrp_nr_ns(), and kills
__pgrp/__session and the related helpers.

The change in drivers/char/tty_io.c is cosmetic, but hopefully makes sense
anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alan Cox <number6@the-village.bc.nu>		[tty parts]
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:02 -07:00
Al Viro 5ad4e53bd5 Get rid of indirect include of fs_struct.h
Don't pull it in sched.h; very few files actually need it and those
can include directly.  sched.h itself only needs forward declaration
of struct fs_struct;

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-31 23:00:27 -04:00
Ingo Molnar 8163d88c79 Merge commit 'v2.6.29-rc7' into perfcounters/core
Conflicts:
	arch/x86/mm/iomap_32.c
2009-03-04 11:42:31 +01:00
Dhaval Giani 54e9912428 sched: don't allow setuid to succeed if the user does not have rt bandwidth
Impact: fix hung task with certain (non-default) rt-limit settings

Corey Hickey reported that on using setuid to change the uid of a
rt process, the process would be unkillable and not be running.
This is because there was no rt runtime for that user group. Add
in a check to see if a user can attach an rt task to its task group.
On failure, return EINVAL, which is also returned in
CONFIG_CGROUP_SCHED.

Reported-by: Corey Hickey <bugfood-ml@fatooh.org>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-27 11:11:53 +01:00
Ingo Molnar 95fd4845ed Merge commit 'v2.6.29-rc4' into perfcounters/core
Conflicts:
	arch/x86/kernel/setup_percpu.c
	arch/x86/mm/fault.c
	drivers/acpi/processor_idle.c
	kernel/irq/handle.c
2009-02-11 09:22:04 +01:00
Andrew Morton 60fd760fb9 revert "rlimit: permit setting RLIMIT_NOFILE to RLIM_INFINITY"
Revert commit 0c2d64fb6c because it causes
(arguably poorly designed) existing userspace to spend interminable
periods closing billions of not-open file descriptors.

We could bring this back, with some sort of opt-in tunable in /proc, which
defaults to "off".

Peter's alanysis follows:

: I spent several hours trying to get to the bottom of a serious
: performance issue that appeared on one of our servers after upgrading to
: 2.6.28.  In the end it's what could be considered a userspace bug that
: was triggered by a change in 2.6.28.  Since this might also affect other
: people I figured I'd at least document what I found here, and maybe we
: can even do something about it:
:
:
: So, I upgraded some of debian.org's machines to 2.6.28.1 and immediately
: the team maintaining our ftp archive complained that one of their
: scripts that previously ran in a few minutes still hadn't even come
: close to being done after an hour or so.  Downgrading to 2.6.27 fixed
: that.
:
: Turns out that script is forking a lot and something in it or python or
: whereever closes all the file descriptors it doesn't want to pass on.
: That is, it starts at zero and goes up to ulimit -n/RLIMIT_NOFILE and
: closes them all with a few exceptions.
:
: Turns out that takes a long time when your limit -n is now 2^20 (1048576).
:
: With 2.6.27.* the ulimit -n was the standard 1024, but with 2.6.28 it is
: now a thousand times that.
:
: 2.6.28 included a patch titled "rlimit: permit setting RLIMIT_NOFILE to
: RLIM_INFINITY" (0c2d64fb6c)[1] that
: allows, as the title implies, to set the limit for number of files to
: infinity.
:
: Closer investigation showed that the broken default ulimit did not apply
: to "system" processes (like stuff started from init).  In the end I
: could establish that all processes that passed through pam_limit at one
: point had the bad resource limit.
:
: Apparently the pam library in Debian etch (4.0) initializes the limits
: to some default values when it doesn't have any settings in limit.conf
: to override them.  Turns out that for nofiles this is RLIM_INFINITY.
: Commenting out "case RLIMIT_NOFILE" in pam_limit.c:267 of our pam
: package version 0.79-5 fixes that - tho I'm not sure what side effects
: that has.
:
: Debian lenny (the upcoming 5.0 version) doesn't have this issue as it
: uses a different pam (version).

Reported-by: Peter Palfrader <weasel@debian.org>
Cc: Adam Tkac <vonsch@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05 12:56:47 -08:00
Ingo Molnar 77835492ed Merge commit 'v2.6.29-rc2' into perfcounters/core
Conflicts:
	include/linux/syscalls.h
2009-01-21 16:37:27 +01:00
Heiko Carstens 836f92adf1 [CVE-2009-0029] System call wrappers part 31
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:31 +01:00
Heiko Carstens c4ea37c26a [CVE-2009-0029] System call wrappers part 26
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:29 +01:00
Heiko Carstens e48fbb699f [CVE-2009-0029] System call wrappers part 24
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:28 +01:00
Heiko Carstens 5a8a82b1d3 [CVE-2009-0029] System call wrappers part 23
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:28 +01:00
Heiko Carstens 754fe8d297 [CVE-2009-0029] System call wrappers part 07
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:20 +01:00
Heiko Carstens b290ebe2c4 [CVE-2009-0029] System call wrappers part 04
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens ae1251ab78 [CVE-2009-0029] System call wrappers part 03
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens dbf040d9d1 [CVE-2009-0029] System call wrappers part 02
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:19 +01:00
Heiko Carstens 58fd3aa288 [CVE-2009-0029] System call wrappers part 01
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:18 +01:00
Ingo Molnar 506c10f26c Merge commit 'v2.6.29-rc1' into perfcounters/core
Conflicts:
	include/linux/kernel_stat.h
2009-01-11 02:42:53 +01:00
Linus Torvalds cfa97f993c Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix section mismatch
  sched: fix double kfree in failure path
  sched: clean up arch_reinit_sched_domains()
  sched: mark sched_create_sysfs_power_savings_entries() as __init
  getrusage: RUSAGE_THREAD should return ru_utime and ru_stime
  sched: fix sched_slice()
  sched_clock: prevent scd->clock from moving backwards, take #2
  sched: sched.c declare variables before they get used
2009-01-06 17:10:33 -08:00
Paul Mackerras e3d5a27d58 Allow times and time system calls to return small negative values
At the moment, the times() system call will appear to fail for a period
shortly after boot, while the value it want to return is between -4095 and
-1.  The same thing will also happen for the time() system call on 32-bit
platforms some time in 2106 or so.

On some platforms, such as x86, this is unavoidable because of the system
call ABI, but other platforms such as powerpc have a separate error
indication from the return value, so system calls can in fact return small
negative values without indicating an error.  On those platforms,
force_successful_syscall_return() provides a way to indicate that the
system call return value should not be treated as an error even if it is
in the range which would normally be taken as a negative error number.

This adds a force_successful_syscall_return() call to the time() and
times() system calls plus their 32-bit compat versions, so that they don't
erroneously indicate an error on those platforms whose system call ABI has
a separate error indication.  This will not affect anything on other
platforms.

Joakim Tjernlund added the fix for time() and the compat versions of
time() and times(), after I did the fix for times().

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
KOSAKI Motohiro 8916edef58 getrusage: RUSAGE_THREAD should return ru_utime and ru_stime
Impact: task stats regression fix

Original getrusage(RUSAGE_THREAD) implementation can return ru_utime and
ru_stime. But commit "f06febc: timers: fix itimer/many thread hang" broke it.

this patch restores it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 14:04:00 +01:00
Linus Torvalds 5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00
Ingo Molnar e1df957670 Merge branch 'linus' into perfcounters/core
Conflicts:
	fs/exec.c
	include/linux/init_task.h

Simple context conflicts.
2008-12-29 09:45:15 +01:00
Ingo Molnar 1d1c7ddbfa perf counters: add prctl interface to disable/enable counters
Add a way for self-monitoring tasks to disable/enable counters summarily,
via a prctl:

	PR_TASK_PERF_COUNTERS_DISABLE		31
	PR_TASK_PERF_COUNTERS_ENABLE		32

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 15:45:55 +01:00
Serge Hallyn 18b6e0414e User namespaces: set of cleanups (v2)
The user_ns is moved from nsproxy to user_struct, so that a struct
cred by itself is sufficient to determine access (which it otherwise
would not be).  Corresponding ecryptfs fixes (by David Howells) are
here as well.

Fix refcounting.  The following rules now apply:
        1. The task pins the user struct.
        2. The user struct pins its user namespace.
        3. The user namespace pins the struct user which created it.

User namespaces are cloned during copy_creds().  Unsharing a new user_ns
is no longer possible.  (We could re-add that, but it'll cause code
duplication and doesn't seem useful if PAM doesn't need to clone user
namespaces).

When a user namespace is created, its first user (uid 0) gets empty
keyrings and a clean group_info.

This incorporates a previous patch by David Howells.  Here
is his original patch description:

>I suggest adding the attached incremental patch.  It makes the following
>changes:
>
> (1) Provides a current_user_ns() macro to wrap accesses to current's user
>     namespace.
>
> (2) Fixes eCryptFS.
>
> (3) Renames create_new_userns() to create_user_ns() to be more consistent
>     with the other associated functions and because the 'new' in the name is
>     superfluous.
>
> (4) Moves the argument and permission checks made for CLONE_NEWUSER to the
>     beginning of do_fork() so that they're done prior to making any attempts
>     at allocation.
>
> (5) Calls create_user_ns() after prepare_creds(), and gives it the new creds
>     to fill in rather than have it return the new root user.  I don't imagine
>     the new root user being used for anything other than filling in a cred
>     struct.
>
>     This also permits me to get rid of a get_uid() and a free_uid(), as the
>     reference the creds were holding on the old user_struct can just be
>     transferred to the new namespace's creator pointer.
>
> (6) Makes create_user_ns() reset the UIDs and GIDs of the creds under
>     preparation rather than doing it in copy_creds().
>
>David

>Signed-off-by: David Howells <dhowells@redhat.com>

Changelog:
	Oct 20: integrate dhowells comments
		1. leave thread_keyring alone
		2. use current_user_ns() in set_user()

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
2008-11-24 18:57:41 -05:00
Oleg Nesterov 2b5fe6de58 thread_group_cputime: move a couple of callsites outside of ->siglock
Impact: relax the locking of cpu-time accounting calls

->siglock buys nothing for thread_group_cputime() in do_sys_times() and
wait_task_zombie() (which btw takes the unrelated parent's ->siglock).

Actually I think do_sys_times() doesn't need ->siglock at all.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-17 16:55:55 +01:00
David Howells d84f4f992c CRED: Inaugurate COW credentials
Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:23 +11:00
David Howells c69e8d9c01 CRED: Use RCU to access another task's creds and to release a task's own creds
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:19 +11:00
David Howells 86a264abe5 CRED: Wrap current->cred and a few other accessors
Wrap current->cred and a few other accessors to hide their actual
implementation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:18 +11:00
David Howells b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells 76aac0e9a1 CRED: Wrap task credential accesses in the core kernel
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:12 +11:00
Thomas Gleixner 268a3dcfea Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2
Conflicts:

	kernel/time/tick-sched.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-22 09:48:06 +02:00
Thomas Gleixner c465a76af6 Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus 2008-10-20 13:14:06 +02:00
Arjan van de Ven 651dab4264 Merge commit 'linus/master' into merge-linus
Conflicts:

	arch/x86/kvm/i8254.c
2008-10-17 09:20:26 -07:00
Andrew Morton 9679e4dd62 kernel/sys.c: improve code generation
utsname() is quite expensive to calculate.  Cache it in a local.

          text    data     bss     dec     hex filename
before:  11136     720      16   11872    2e60 kernel/sys.o
after:   11096     720      16   11832    2e38 kernel/sys.o

Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:31 -07:00
Vegard Nossum 8798881507 utsname: completely overwrite prior information
On sethostname() and setdomainname(), previous information may be retained
if it was longer than than the new hostname/domainname.

This can be demonstrated trivially by calling sethostname() first with a
long name, then with a short name, and then calling uname() to retrieve
the full buffer that contains the hostname (and possibly parts of the old
hostname), one just has to look past the terminating zero.

I don't know if we should really care that much (hence the RFC); the only
scenarios I can possibly think of is administrator putting something
sensitive in the hostname (or domain name) by accident, and changing it
back will not undo the mistake entirely, though it's not like we can
recover gracefully from "rm -rf /" either...  The other scenario is
namespaces (CLONE_NEWUTS) where some information may be unintentionally
"inherited" from the previous namespace (a program wants to hide the
original name and does clone + sethostname, but some information is still
left).

I think the patch may be defended on grounds of the principle of least
surprise.  But I am not adamant :-)

(I guess the question now is whether userspace should be able to
write embedded NULs into the buffer or not...)

At least the observation has been made and the patch has been presented.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:31 -07:00
Adam Tkac 0c2d64fb6c rlimit: permit setting RLIMIT_NOFILE to RLIM_INFINITY
When a process wants to set the limit of open files to RLIM_INFINITY it
gets EPERM even if it has CAP_SYS_RESOURCE capability.

For example, BIND does:

...
#elif defined(NR_OPEN) && defined(__linux__)
        /*
         * Some Linux kernels don't accept RLIM_INFINIT; the maximum
         * possible value is the NR_OPEN defined in linux/fs.h.
         */
        if (resource == isc_resource_openfiles && rlim_value == RLIM_INFINITY) {
                rl.rlim_cur = rl.rlim_max = NR_OPEN;
                unixresult = setrlimit(unixresource, &rl);
                if (unixresult == 0)
                        return (ISC_R_SUCCESS);
        }
#elif ...

If we allow setting RLIMIT_NOFILE to RLIM_INFINITY we increase portability
- you don't have to check if OS is linux and then use different schema for
limits.

The spec says "Specifying RLIM_INFINITY as any resource limit value on a
successful call to setrlimit() shall inhibit enforcement of that resource
limit." and we're presently not doing that.

Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:31 -07:00
Alan Cox 9c9f4ded90 tty: Add a kref count
Introduce a kref to the tty structure and use it to protect the tty->signal
tty references. For now we don't introduce it for anything else.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 09:51:40 -07:00
Frank Mayhar f06febc96b timers: fix itimer/many thread hang
Overview

This patch reworks the handling of POSIX CPU timers, including the
ITIMER_PROF, ITIMER_VIRT timers and rlimit handling.  It was put together
with the help of Roland McGrath, the owner and original writer of this code.

The problem we ran into, and the reason for this rework, has to do with using
a profiling timer in a process with a large number of threads.  It appears
that the performance of the old implementation of run_posix_cpu_timers() was
at least O(n*3) (where "n" is the number of threads in a process) or worse.
Everything is fine with an increasing number of threads until the time taken
for that routine to run becomes the same as or greater than the tick time, at
which point things degrade rather quickly.

This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."

Code Changes

This rework corrects the implementation of run_posix_cpu_timers() to make it
run in constant time for a particular machine.  (Performance may vary between
one machine and another depending upon whether the kernel is built as single-
or multiprocessor and, in the latter case, depending upon the number of
running processors.)  To do this, at each tick we now update fields in
signal_struct as well as task_struct.  The run_posix_cpu_timers() function
uses those fields to make its decisions.

We define a new structure, "task_cputime," to contain user, system and
scheduler times and use these in appropriate places:

struct task_cputime {
	cputime_t utime;
	cputime_t stime;
	unsigned long long sum_exec_runtime;
};

This is included in the structure "thread_group_cputime," which is a new
substructure of signal_struct and which varies for uniprocessor versus
multiprocessor kernels.  For uniprocessor kernels, it uses "task_cputime" as
a simple substructure, while for multiprocessor kernels it is a pointer:

struct thread_group_cputime {
	struct task_cputime totals;
};

struct thread_group_cputime {
	struct task_cputime *totals;
};

We also add a new task_cputime substructure directly to signal_struct, to
cache the earliest expiration of process-wide timers, and task_cputime also
replaces the it_*_expires fields of task_struct (used for earliest expiration
of thread timers).  The "thread_group_cputime" structure contains process-wide
timers that are updated via account_user_time() and friends.  In the non-SMP
case the structure is a simple aggregator; unfortunately in the SMP case that
simplicity was not achievable due to cache-line contention between CPUs (in
one measured case performance was actually _worse_ on a 16-cpu system than
the same test on a 4-cpu system, due to this contention).  For SMP, the
thread_group_cputime counters are maintained as a per-cpu structure allocated
using alloc_percpu().  The timer functions update only the timer field in
the structure corresponding to the running CPU, obtained using per_cpu_ptr().

We define a set of inline functions in sched.h that we use to maintain the
thread_group_cputime structure and hide the differences between UP and SMP
implementations from the rest of the kernel.  The thread_group_cputime_init()
function initializes the thread_group_cputime structure for the given task.
The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the
out-of-line function thread_group_cputime_alloc_smp() to allocate and fill
in the per-cpu structures and fields.  The thread_group_cputime_free()
function, also a no-op for UP, in SMP frees the per-cpu structures.  The
thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls
thread_group_cputime_alloc() if the per-cpu structures haven't yet been
allocated.  The thread_group_cputime() function fills the task_cputime
structure it is passed with the contents of the thread_group_cputime fields;
in UP it's that simple but in SMP it must also safely check that tsk->signal
is non-NULL (if it is it just uses the appropriate fields of task_struct) and,
if so, sums the per-cpu values for each online CPU.  Finally, the three
functions account_group_user_time(), account_group_system_time() and
account_group_exec_runtime() are used by timer functions to update the
respective fields of the thread_group_cputime structure.

Non-SMP operation is trivial and will not be mentioned further.

The per-cpu structure is always allocated when a task creates its first new
thread, via a call to thread_group_cputime_clone_thread() from copy_signal().
It is freed at process exit via a call to thread_group_cputime_free() from
cleanup_signal().

All functions that formerly summed utime/stime/sum_sched_runtime values from
from all threads in the thread group now use thread_group_cputime() to
snapshot the values in the thread_group_cputime structure or the values in
the task structure itself if the per-cpu structure hasn't been allocated.

Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit.
The run_posix_cpu_timers() function has been split into a fast path and a
slow path; the former safely checks whether there are any expired thread
timers and, if not, just returns, while the slow path does the heavy lifting.
With the dedicated thread group fields, timers are no longer "rebalanced" and
the process_timer_rebalance() function and related code has gone away.  All
summing loops are gone and all code that used them now uses the
thread_group_cputime() inline.  When process-wide timers are set, the new
task_cputime structure in signal_struct is used to cache the earliest
expiration; this is checked in the fast path.

Performance

The fix appears not to add significant overhead to existing operations.  It
generally performs the same as the current code except in two cases, one in
which it performs slightly worse (Case 5 below) and one in which it performs
very significantly better (Case 2 below).  Overall it's a wash except in those
two cases.

I've since done somewhat more involved testing on a dual-core Opteron system.

Case 1: With no itimer running, for a test with 100,000 threads, the fixed
	kernel took 1428.5 seconds, 513 seconds more than the unfixed system,
	all of which was spent in the system.  There were twice as many
	voluntary context switches with the fix as without it.

Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
	an unmodified kernel can handle), the fixed kernel ran the test in
	eight percent of the time (5.8 seconds as opposed to 70 seconds) and
	had better tick accuracy (.012 seconds per tick as opposed to .023
	seconds per tick).

Case 3: A 4000-thread test with an initial timer tick of .01 second and an
	interval of 10,000 seconds (i.e. a timer that ticks only once) had
	very nearly the same performance in both cases:  6.3 seconds elapsed
	for the fixed kernel versus 5.5 seconds for the unfixed kernel.

With fewer threads (eight in these tests), the Case 1 test ran in essentially
the same time on both the modified and unmodified kernels (5.2 seconds versus
5.8 seconds).  The Case 2 test ran in about the same time as well, 5.9 seconds
versus 5.4 seconds but again with much better tick accuracy, .013 seconds per
tick versus .025 seconds per tick for the unmodified kernel.

Since the fix affected the rlimit code, I also tested soft and hard CPU limits.

Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
	running), the modified kernel was very slightly favored in that while
	it killed the process in 19.997 seconds of CPU time (5.002 seconds of
	wall time), only .003 seconds of that was system time, the rest was
	user time.  The unmodified kernel killed the process in 20.001 seconds
	of CPU (5.014 seconds of wall time) of which .016 seconds was system
	time.  Really, though, the results were too close to call.  The results
	were essentially the same with no itimer running.

Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
	(where the hard limit would never be reached) and an itimer running,
	the modified kernel exhibited worse tick accuracy than the unmodified
	kernel: .050 seconds/tick versus .028 seconds/tick.  Otherwise,
	performance was almost indistinguishable.  With no itimer running this
	test exhibited virtually identical behavior and times in both cases.

In times past I did some limited performance testing.  those results are below.

On a four-cpu Opteron system without this fix, a sixteen-thread test executed
in 3569.991 seconds, of which user was 3568.435s and system was 1.556s.  On
the same system with the fix, user and elapsed time were about the same, but
system time dropped to 0.007 seconds.  Performance with eight, four and one
thread were comparable.  Interestingly, the timer ticks with the fix seemed
more accurate:  The sixteen-thread test with the fix received 149543 ticks
for 0.024 seconds per tick, while the same test without the fix received 58720
for 0.061 seconds per tick.  Both cases were configured for an interval of
0.01 seconds.  Again, the other tests were comparable.  Each thread in this
test computed the primes up to 25,000,000.

I also did a test with a large number of threads, 100,000 threads, which is
impossible without the fix.  In this case each thread computed the primes only
up to 10,000 (to make the runtime manageable).  System time dominated, at
1546.968 seconds out of a total 2176.906 seconds (giving a user time of
629.938s).  It received 147651 ticks for 0.015 seconds per tick, still quite
accurate.  There is obviously no comparable test without the fix.

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 16:25:35 +02:00
Arjan van de Ven 6976675d94 hrtimer: create a "timer_slack" field in the task struct
We want to be able to control the default "rounding" that is used by
select() and poll() and friends. This is a per process property
(so that we can have a "nice" like program to start certain programs with
a looser or stricter rounding) that can be set/get via a prctl().

For this purpose, a field called "timer_slack_ns" is added to the task
struct. In addition, a field called "default_timer_slack"ns" is added
so that tasks easily can temporarily to a more/less accurate slack and then
back to the default.

The default value of the slack is set to 50 usec; this is significantly less
than 2.6.27's average select() and poll() timing error but still allows
the kernel to group timers somewhat to preserve power behavior. Applications
and admins can override this via the prctl()

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05 21:35:30 -07:00
Ken Chen 2d70b68d42 fix setpriority(PRIO_PGRP) thread iterator breakage
When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP
process, only the task leader of the process is affected, all other
sibling LWP threads didn't receive the setting.  The problem was that the
iterator used in sys_setpriority() only iteartes over one task for each
process, ignoring all other sibling thread.

Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk
each thread of a process.  Convert 4 call sites in {set/get}priority and
ioprio_{set/get}.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:32 -07:00
Huang Ying ca195b7f6d kexec jump: remove duplication of kexec_restart_prepare()
Call kernel_restart_prepare() in kernel_kexec() instead of duplicating the
code.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:42 -07:00
Huang Ying 3ab8352137 kexec jump
This patch provides an enhancement to kexec/kdump.  It implements the
following features:

- Backup/restore memory used by the original kernel before/after
  kexec.

- Save/restore CPU state before/after kexec.

The features of this patch can be used as a general method to call program in
physical mode (paging turning off).  This can be used to call BIOS code under
Linux.

kexec-tools needs to be patched to support kexec jump. The patches and
the precompiled kexec can be download from the following URL:

       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

Usage example of calling some physical mode code and return:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_KEXEC=y
CONFIG_PM=y
CONFIG_KEXEC_JUMP=y

2. Build patched kexec-tool or download the pre-built one.

3. Build some physical mode executable named such as "phy_mode"

4. Boot kernel compiled in step 1.

5. Load physical mode executable with /sbin/kexec. The shell command
   line can be as follow:

   /sbin/kexec --load-preserve-context --args-none phy_mode

6. Call physical mode executable with following shell command line:

   /sbin/kexec -e

Implementation point:

To support jumping without reserving memory.  One shadow backup page (source
page) is allocated for each page used by kexeced code image (destination
page).  When do kexec_load, the image of kexeced code is loaded into source
pages, and before executing, the destination pages and the source pages are
swapped, so the contents of destination pages are backupped.  Before jumping
to the kexeced code image and after jumping back to the original kernel, the
destination pages and the source pages are swapped too.

C ABI (calling convention) is used as communication protocol between
kernel and called code.

A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to
indicate that the loaded kernel image is used for jumping back.

Now, only the i386 architecture is supported.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Adrian Bunk 7394f0f6c0 unexport uts_sem
With the removal of the Solaris binary emulation the export of
uts_sem became unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:45 -07:00
KOSAKI Motohiro ac331d158e call_usermodehelper(): increase reliability
Presently call_usermodehelper_setup() uses GFP_ATOMIC.  but it can return
NULL _very_ easily.

GFP_ATOMIC is needed only when we can't sleep.  and, GFP_KERNEL is robust
and better.

thus, I add gfp_mask argument to call_usermodehelper_setup().

So, its callers pass the gfp_t as below:

call_usermodehelper() and call_usermodehelper_keys():
	depend on 'wait' argument.
call_usermodehelper_pipe():
	always GFP_KERNEL because always run under process context.
orderly_poweroff():
	pass to GFP_ATOMIC because may run under interrupt context.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Paul Menage" <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:28 -07:00
Shi Weihua 7b26655f62 sys_prctl(): fix return of uninitialized value
If none of the switch cases match, the PR_SET_PDEATHSIG and
PR_SET_DUMPABLE cases of the switch statement will never write to local
variable `error'.

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Cc: Andrew G. Morgan <morgan@kernel.org>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:13 -07:00
Oleg Nesterov 12a3de0a96 pids: sys_getpgid: fix unsafe *pid usage, s/tasklist/rcu/
1. sys_getpgid() needs rcu_read_lock() to derive the pgrp _nr, even if
   the task is current, otherwise we can race with another thread which
   does sys_setpgid().

2. Use rcu_read_lock() instead of tasklist_lock when pid != 0, make sure
   that we don't use the NULL pid if the task exits right after successful
   find_task_by_vpid().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:49 -07:00
Oleg Nesterov 1dd768c081 pids: sys_getsid: fix unsafe *pid usage, fix possible 0 instead of -ESRCH
1. sys_getsid() needs rcu_read_lock() to derive the session _nr, even if
   the task is current, otherwise we can race with another thread which
   does sys_setsid().

2. The task can exit between find_task_by_vpid() and task_session_vnr(),
   in that unlikely case sys_getsid() returns 0 instead of -ESRCH.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:49 -07:00
Oleg Nesterov 83beaf3c6c pids: sys_setpgid: use change_pid() helper
Use change_pid() instead of detach_pid() + attach_pid() in sys_setpgid().

This way task_pgrp() is not NULL in between.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc:  "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:49 -07:00
Oleg Nesterov d6cf723a14 k_getrusage: don't take rcu_read_lock()
Just a trivial example, more to come.

k_getrusage() holds rcu_read_lock() because it was previously required by
lock_task_sighand().  Unneeded now.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:34 -07:00
Sripathi Kodi 679c9cd4ac add RUSAGE_THREAD
Add the RUSAGE_THREAD option for the getrusage system call.  This is
essentially Roland's patch from http://lkml.org/lkml/2008/1/18/589, but the
line about RUSAGE_LWP line has been removed, as suggested by Ulrich and
Christoph.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:05:59 -07:00
Andrew G. Morgan 3898b1b4eb capabilities: implement per-process securebits
Filesystem capability support makes it possible to do away with (set)uid-0
based privilege and use capabilities instead.  That is, with filesystem
support for capabilities but without this present patch, it is (conceptually)
possible to manage a system with capabilities alone and never need to obtain
privilege via (set)uid-0.

Of course, conceptually isn't quite the same as currently possible since few
user applications, certainly not enough to run a viable system, are currently
prepared to leverage capabilities to exercise privilege.  Further, many
applications exist that may never get upgraded in this way, and the kernel
will continue to want to support their setuid-0 base privilege needs.

Where pure-capability applications evolve and replace setuid-0 binaries, it is
desirable that there be a mechanisms by which they can contain their
privilege.  In addition to leveraging the per-process bounding and inheritable
sets, this should include suppressing the privilege of the uid-0 superuser
from the process' tree of children.

The feature added by this patch can be leveraged to suppress the privilege
associated with (set)uid-0.  This suppression requires CAP_SETPCAP to
initiate, and only immediately affects the 'current' process (it is inherited
through fork()/exec()).  This reimplementation differs significantly from the
historical support for securebits which was system-wide, unwieldy and which
has ultimately withered to a dead relic in the source of the modern kernel.

With this patch applied a process, that is capable(CAP_SETPCAP), can now drop
all legacy privilege (through uid=0) for itself and all subsequently
fork()'d/exec()'d children with:

  prctl(PR_SET_SECUREBITS, 0x2f);

This patch represents a no-op unless CONFIG_SECURITY_FILE_CAPABILITIES is
enabled at configure time.

[akpm@linux-foundation.org: fix uninitialised var warning]
[serue@us.ibm.com: capabilities: use cap_task_prctl when !CONFIG_SECURITY]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Paul Moore <paul.moore@hp.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:26 -07:00
Erik Bosman 8fb402bccf generic, x86: add prctl commands PR_GET_TSC and PR_SET_TSC
This patch adds prctl commands that make it possible
to deny the execution of timestamp counters in userspace.
If this is not implemented on a specific architecture,
prctl will return -EINVAL.

ned-off-by: Erik Bosman <ejbosman@cs.vu.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:55 +02:00
Pavel Emelyanov 6c5f3e7b43 Pidns: make full use of xxx_vnr() calls
Some time ago the xxx_vnr() calls (e.g.  pid_vnr or find_task_by_vpid) were
_all_ converted to operate on the current pid namespace.  After this each call
like xxx_nr_ns(foo, current->nsproxy->pid_ns) is nothing but a xxx_vnr(foo)
one.

Switch all the xxx_nr_ns() callers to use the xxx_vnr() calls where
appropriate.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Oleg Nesterov ac9a8e3f0f sys_getsid: don't use ->nsproxy directly
With the new semantics of find_vpid() we don't need to play with ->nsproxy
explicitely, _vxx() do the right things.

Also s/tasklist/rcu/.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:28 -08:00
Oleg Nesterov 6806aac6d2 sys_setsid: remove now unneeded session != 1 check
Eric's "fix clone(CLONE_NEWPID)" eliminated the last reason for this hack.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Oleg Nesterov 430c623121 start the global /sbin/init with 0,0 special pids
As Eric pointed out, there is no problem with init starting with sid == pgid
== 0, and this was historical linux behavior changed in 2.6.18.

Remove kernel_init()->__set_special_pids(), this is unneeded and complicates
the rules for sys_setsid().

This change and the previous change in daemonize() mean that /sbin/init does
not need the special "session != 1" hack in sys_setsid() any longer. We can't
remove this check yet, we should cleanup copy_process(CLONE_NEWPID) first, so
update the comment only.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Oleg Nesterov 8520d7c7f8 teach set_special_pids() to use struct pid
Change set_special_pids() to work with struct pid, not pid_t from global name
space. This again speedups and imho cleanups the code, also a preparation for
the next patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Oleg Nesterov e4cc0a9c87 fix setsid() for sub-namespace /sbin/init
sys_setsid() still deals with pid_t's from the global namespace. This means
that the "session > 1" check can't help for sub-namespace init, setsid() can't
succeed because copy_process(CLONE_NEWPID) populates PIDTYPE_PGID/SID links.

Remove the usage of task_struct->pid and convert the code to use "struct pid".
This also simplifies and speedups the code, saves one find_pid().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Oleg Nesterov 4e021306cf sys_setpgid(): simplify pid/ns interaction
sys_setpgid() does unneeded conversions from pid_t to "struct pid" and vice
versa.  Use "struct pid" more consistently.  Saves one find_vpid() and
eliminates the explicit usage of ->nsproxy->pid_ns.  Imho, cleanups the
code.

Also use the same_thread_group() helper.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Eric Dumazet 1bf47346d7 kernel/sys.c: get rid of expensive divides in groups_sort()
groups_sort() can be quite long if user loads a large gid table.

This is because GROUP_AT(group_info, some_integer) uses an integer divide.
So having to do XXX thousand divides during one syscall can lead to very
high latencies.  (NGROUPS_MAX=65536)

In the past (25 Mar 2006), an analog problem was found in groups_search()
(commit d74beb9f33 ) and at that time I
changed some variables to unsigned int.

I believe that a more generic fix is to make sure NGROUPS_PER_BLOCK is
unsigned.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:09 -08:00
Eric Dumazet 9cfe015aa4 get rid of NR_OPEN and introduce a sysctl_nr_open
NR_OPEN (historically set to 1024*1024) actually forbids processes to open
more than 1024*1024 handles.

Unfortunatly some production servers hit the not so 'ridiculously high
value' of 1024*1024 file descriptors per process.

Changing NR_OPEN is not considered safe because of vmalloc space potential
exhaust.

This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to
1024*1024, so that admins can decide to change this limit if their workload
needs it.

[akpm@linux-foundation.org: export it for sparc64]
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:06 -08:00
Adrian Bunk 4ef7229ffa make kernel_shutdown_prepare() static
kernel_shutdown_prepare() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:22 -08:00
Serge E. Hallyn 3b7391de67 capabilities: introduce per-process capability bounding set
The capability bounding set is a set beyond which capabilities cannot grow.
 Currently cap_bset is per-system.  It can be manipulated through sysctl,
but only init can add capabilities.  Root can remove capabilities.  By
default it includes all caps except CAP_SETPCAP.

This patch makes the bounding set per-process when file capabilities are
enabled.  It is inherited at fork from parent.  Noone can add elements,
CAP_SETPCAP is required to remove them.

One example use of this is to start a safer container.  For instance, until
device namespaces or per-container device whitelists are introduced, it is
best to take CAP_MKNOD away from a container.

The bounding set will not affect pP and pE immediately.  It will only
affect pP' and pE' after subsequent exec()s.  It also does not affect pI,
and exec() does not constrain pI'.  So to really start a shell with no way
of regain CAP_MKNOD, you would do

	prctl(PR_CAPBSET_DROP, CAP_MKNOD);
	cap_t cap = cap_get_proc();
	cap_value_t caparray[1];
	caparray[0] = CAP_MKNOD;
	cap_set_flag(cap, CAP_INHERITABLE, 1, caparray, CAP_DROP);
	cap_set_proc(cap);
	cap_free(cap);

The following test program will get and set the bounding
set (but not pI).  For instance

	./bset get
		(lists capabilities in bset)
	./bset drop cap_net_raw
		(starts shell with new bset)
		(use capset, setuid binary, or binary with
		file capabilities to try to increase caps)

************************************************************
cap_bound.c
************************************************************
 #include <sys/prctl.h>
 #include <linux/capability.h>
 #include <sys/types.h>
 #include <unistd.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>

 #ifndef PR_CAPBSET_READ
 #define PR_CAPBSET_READ 23
 #endif

 #ifndef PR_CAPBSET_DROP
 #define PR_CAPBSET_DROP 24
 #endif

int usage(char *me)
{
	printf("Usage: %s get\n", me);
	printf("       %s drop <capability>\n", me);
	return 1;
}

 #define numcaps 32
char *captable[numcaps] = {
	"cap_chown",
	"cap_dac_override",
	"cap_dac_read_search",
	"cap_fowner",
	"cap_fsetid",
	"cap_kill",
	"cap_setgid",
	"cap_setuid",
	"cap_setpcap",
	"cap_linux_immutable",
	"cap_net_bind_service",
	"cap_net_broadcast",
	"cap_net_admin",
	"cap_net_raw",
	"cap_ipc_lock",
	"cap_ipc_owner",
	"cap_sys_module",
	"cap_sys_rawio",
	"cap_sys_chroot",
	"cap_sys_ptrace",
	"cap_sys_pacct",
	"cap_sys_admin",
	"cap_sys_boot",
	"cap_sys_nice",
	"cap_sys_resource",
	"cap_sys_time",
	"cap_sys_tty_config",
	"cap_mknod",
	"cap_lease",
	"cap_audit_write",
	"cap_audit_control",
	"cap_setfcap"
};

int getbcap(void)
{
	int comma=0;
	unsigned long i;
	int ret;

	printf("i know of %d capabilities\n", numcaps);
	printf("capability bounding set:");
	for (i=0; i<numcaps; i++) {
		ret = prctl(PR_CAPBSET_READ, i);
		if (ret < 0)
			perror("prctl");
		else if (ret==1)
			printf("%s%s", (comma++) ? ", " : " ", captable[i]);
	}
	printf("\n");
	return 0;
}

int capdrop(char *str)
{
	unsigned long i;

	int found=0;
	for (i=0; i<numcaps; i++) {
		if (strcmp(captable[i], str) == 0) {
			found=1;
			break;
		}
	}
	if (!found)
		return 1;
	if (prctl(PR_CAPBSET_DROP, i)) {
		perror("prctl");
		return 1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc<2)
		return usage(argv[0]);
	if (strcmp(argv[1], "get")==0)
		return getbcap();
	if (strcmp(argv[1], "drop")!=0 || argc<3)
		return usage(argv[0]);
	if (capdrop(argv[2])) {
		printf("unknown capability\n");
		return 1;
	}
	return execl("/bin/bash", "/bin/bash", NULL);
}
************************************************************

[serue@us.ibm.com: fix typo]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>a
Signed-off-by: "Serge E. Hallyn" <serue@us.ibm.com>
Tested-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:20 -08:00
Ingo Molnar 4307d1e5ad x86: ignore the sys_getcpu() tcache parameter
dont use the vgetcpu tcache - it's causing problems with tasks
migrating, they'll see the old cache up to a jiffy after the
migration, further increasing the costs of the migration.

In the worst case they see a complete bogus information from
the tcache, when a sys_getcpu() call "invalidated" the cache
info by incrementing the jiffies _and_ the cpuid info in the
cache and the following vdso_getcpu() call happens after
vdso_jiffies have been incremented.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:00 +01:00
Pavel Emelyanov 9a2e70572e Isolate the explicit usage of signal->pgrp
The pgrp field is not used widely around the kernel so it is now marked as
deprecated with appropriate comment.

The initialization of INIT_SIGNALS is trimmed because
a) they are set to 0 automatically;
b) gcc cannot properly initialize two anonymous (the second one
   is the one with the session) unions. In this particular case
   to make it compile we'd have to add some field initialized
   right before the .pgrp.

This is the same patch as the 1ec320afdc one
(from Cedric), but for the pgrp field.

Some progress report:

We have to deprecate the pid, tgid, session and pgrp fields on struct
task_struct and struct signal_struct.  The session and pgrp are already
deprecated.  The tgid value is close to being such - the worst known usage
in in fs/locks.c and audit code.  The pid field deprecation is mainly
blocked by numerous printk-s around the kernel that print the tsk->pid to
log.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Pavel Emelyanov 228ebcbe63 Uninline find_task_by_xxx set of functions
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one.  All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.

It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.

This patch moves all this stuff out-of-line into kernel/pid.c.  Together
with the next patch it saves a bit less than 400 bytes from the .text
section.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Pavel Emelianov a47afb0f9d pid namespaces: round up the API
The set of functions process_session, task_session, process_group and
task_pgrp is confusing, as the names can be mixed with each other when looking
at the code for a long time.

The proposals are to
* equip the functions that return the integer with _nr suffix to
  represent that fact,
* and to make all functions work with task (not process) by making
  the common prefix of the same name.

For monotony the routines signal_session() and set_signal_session() are
replaced with task_session_nr() and set_task_session(), especially since they
are only used with the explicit task->signal dereference.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Alexey Dobriyan fe9d4f5763 Add kernel/notifier.c
There is separate notifier header, but no separate notifier .c file.

Extract notifier code out of kernel/sys.c which will remain for
misc syscalls I hope. Merge kernel/die_notifier.c into kernel/notifier.c.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:34 -07:00
Adrian Bunk c3d42d7527 unexport pm_power_off_prepare
This patch removes the unused EXPORT_SYMBOL(pm_power_off_prepare).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:19 -07:00
Mark Lord 4047727e5a Fix SMP poweroff hangs
We need to disable all CPUs other than the boot CPU (usually 0) before
attempting to power-off modern SMP machines.  This fixes the
hang-on-poweroff issue on my MythTV SMP box, and also on Thomas Gleixner's
new toybox.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01 07:52:23 -07:00
Oleg Nesterov b07e35f94a setpgid(child) fails if the child was forked by sub-thread
Spotted by Marcin Kowalczyk <qrczak@knm.org.pl>.

sys_setpgid(child) fails if the child was forked by sub-thread.

Fix the "is it our child" check. The previous commit
ee0acf90d3 was not complete.

(this patch asks for the new same_thread_group() helper, but mainline doesn't
 have it yet).

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: <stable@kernel.org>
Tested-by: "Marcin 'Qrczak' Kowalczyk" <qrczak@knm.org.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Rafael J. Wysocki b0cb1a19d0 Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Rafael J. Wysocki 58b3b71dfa Fix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"
Commit bd804eba1c ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 12:13:06 -07:00
Kawai, Hidehiro 6c5d523826 coredump masking: reimplementation of dumpable using two flags
This patch changes mm_struct.dumpable to a pair of bit flags.

set_dumpable() converts three-value dumpable to two flags and stores it into
lower two bits of mm_struct.flags instead of mm_struct.dumpable.
get_dumpable() behaves in the opposite way.

[akpm@linux-foundation.org: export set_dumpable]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:46 -07:00
Rafael J. Wysocki bd804eba1c PM: Introduce pm_power_off_prepare
Introduce the pm_power_off_prepare() callback that can be registered by the
interested platforms in analogy with pm_idle() and pm_power_off(), used for
preparing the system to power off (needed by ACPI).

This allows us to drop acpi_sysclass and device_acpi that are only defined in
order to register the ACPI power off preparation callback, which is needed by
pm_power_off() registered in a much different way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Jeremy Fitzhardinge 86313c488a usermodehelper: Tidy up waiting
Rather than using a tri-state integer for the wait flag in
call_usermodehelper_exec, define a proper enum, and use that.  I've
preserved the integer values so that any callers I've missed should
still work OK.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: David Howells <dhowells@redhat.com>
2007-07-18 08:47:40 -07:00
Jeremy Fitzhardinge 10a0a8d4e3 Add common orderly_poweroff()
Various pieces of code around the kernel want to be able to trigger an
orderly poweroff.  This pulls them together into a single
implementation.

By default the poweroff command is /sbin/poweroff, but it can be set
via sysctl: kernel/poweroff_cmd.  This is split at whitespace, so it
can include command-line arguments.

This patch replaces four other instances of invoking either "poweroff"
or "shutdown -h now": two sbus drivers, and acpi thermal
management.

sparc64 has its own "powerd"; still need to determine whether it should
be replaced by orderly_poweroff().

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David S. Miller <davem@davemloft.net>
2007-07-18 08:47:40 -07:00
Andrea Arcangeli 1d9d02feee move seccomp from /proc to a prctl
This reduces the memory footprint and it enforces that only the current
task can enable seccomp on itself (this is a requirement for a
strightforward [modulo preempt ;) ] TIF_NOTSC implementation).

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:50 -07:00
Cedric Le Goater acce292c82 user namespace: add the framework
Basically, it will allow a process to unshare its user_struct table,
resetting at the same time its own user_struct and all the associated
accounting.

A new root user (uid == 0) is added to the user namespace upon creation.
Such root users have full privileges and it seems that theses privileges
should be controlled through some means (process capabilities ?)

The unshare is not included in this patch.

Changes since [try #4]:
	- Updated get_user_ns and put_user_ns to accept NULL, and
	  get_user_ns to return the namespace.

Changes since [try #3]:
	- moved struct user_namespace to files user_namespace.{c,h}

Changes since [try #2]:
	- removed struct user_namespace* argument from find_user()

Changes since [try #1]:
	- removed struct user_namespace* argument from find_user()
	- added a root_user per user namespace

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: Pavel Emelianov <xemul@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Andrew Morgan <agm@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:47 -07:00
Sukadev Bhattiprolu e713d0dab2 attach_pid() with struct pid parameter
attach_pid() currently takes a pid_t and then uses find_pid() to find the
corresponding struct pid.  Sometimes we already have the struct pid.  We can
then skip find_pid() if attach_pid() were to take a struct pid parameter.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: <containers@lists.osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:35 -07:00
Daniel Walker 3e88c553db use defines in sys_getpriority/sys_setpriority
Switch to the defines for these two checks, instead of hard coding the
values.

[akpm@linux-foundation.org: add missing include]
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:35 -07:00
Eric Dumazet 6eaeeaba39 getrusage(): fill ru_inblock and ru_oublock fields if possible
If CONFIG_TASK_IO_ACCOUNTING is defined, we update io accounting counters for
each task.

This patch permits reporting of values using the well known getrusage()
syscall, filling ru_inblock and ru_oublock instead of null values.

As TASK_IO_ACCOUNTING currently counts bytes counts, we approximate blocks
count doing : nr_blocks = nr_bytes / 512

Example of use :
----------------------
After patch is applied, /usr/bin/time command can now give a good
approximation of IO that the process had to do.

$ /usr/bin/time grep tototo /usr/include/*
Command exited with non-zero status 1
0.00user 0.02system 0:02.11elapsed 1%CPU (0avgtext+0avgdata 0maxresident)k
24288inputs+0outputs (0major+259minor)pagefaults 0swaps

$ /usr/bin/time dd if=/dev/zero of=/tmp/testfile count=1000
1000+0 enregistrements lus
1000+0 enregistrements écrits
512000 octets (512 kB) copiés, 0,00326601 seconde, 157 MB/s
0.00user 0.00system 0:00.00elapsed 80%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+3000outputs (0major+299minor)pagefaults 0swaps

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:34 -07:00
Linus Torvalds 9a9136e270 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  sound: convert "sound" subdirectory to UTF-8
  MAINTAINERS: Add cxacru website/mailing list
  include files: convert "include" subdirectory to UTF-8
  general: convert "kernel" subdirectory to UTF-8
  documentation: convert the Documentation directory to UTF-8
  Convert the toplevel files CREDITS and MAINTAINERS to UTF-8.
  remove broken URLs from net drivers' output
  Magic number prefix consistency change to Documentation/magic-number.txt
  trivial: s/i_sem /i_mutex/
  fix file specification in comments
  drivers/base/platform.c: fix small typo in doc
  misc doc and kconfig typos
  Remove obsolete fat_cvf help text
  Fix occurrences of "the the "
  Fix minor typoes in kernel/module.c
  Kconfig: Remove reference to external mqueue library
  Kconfig: A couple of grammatical fixes in arch/i386/Kconfig
  Correct comments in genrtc.c to refer to correct /proc file.
  Fix more "deprecated" spellos.
  Fix "deprecated" typoes.
  ...

Fix trivial comment conflict in kernel/relay.c.
2007-05-09 12:54:17 -07:00
Gautham R Shenoy 6f7cc11aa6 Extend notifier_call_chain to count nr_calls made
Since 2.6.18-something, the community has been bugged by the problem to
provide a clean and a stable mechanism to postpone a cpu-hotplug event as
lock_cpu_hotplug was badly broken.

This is another proposal towards solving that problem.  This one is along the
lines of the solution provided in kernel/workqueue.c

Instead of having a global mechanism like lock_cpu_hotplug, we allow the
subsytems to define their own per-subsystem hot cpu mutexes.  These would be
taken(released) where ever we are currently calling
lock_cpu_hotplug(unlock_cpu_hotplug).

Also, in the per-subsystem hotcpu callback function,we take this mutex before
we handle any pre-cpu-hotplug events and release it once we finish handling
the post-cpu-hotplug events.  A standard means for doing this has been
provided in [PATCH 2/4] and demonstrated in [PATCH 3/4].

The ordering of these per-subsystem mutexes might still prove to be a
problem, but hopefully lockdep should help us get out of that muddle.

The patch set to be applied against linux-2.6.19-rc5 is as follows:

[PATCH 1/4] :	Extend notifier_call_chain with an option to specify the
		number of notifications to be sent and also count the
		number of notifications actually sent.

[PATCH 2/4] :	Define events CPU_LOCK_ACQUIRE and CPU_LOCK_RELEASE
		and send out notifications for these in _cpu_up and
		_cpu_down. This would help us standardise the acquire and
		release of the subsystem locks in the hotcpu
		callback functions of these subsystems.

[PATCH 3/4] :	Eliminate lock_cpu_hotplug from kernel/sched.c.

[PATCH 4/4] :	In workqueue_cpu_callback function, acquire(release) the
		workqueue_mutex while handling
		CPU_LOCK_ACQUIRE(CPU_LOCK_RELEASE).

If the per-subsystem-locking approach survives the test of time, we can expect
a slow phasing out of lock_cpu_hotplug, which has not yet been eliminated in
these patches :)

This patch:

Provide notifier_call_chain with an option to call only a specified number of
notifiers and also record the number of call to notifiers made.

The need for this enhancement was identified in the post entitled
"Slab - Eliminate lock_cpu_hotplug from slab"
(http://lkml.org/lkml/2006/10/28/92) by Ravikiran G Thirumalai and
Andrew Morton.

This patch adds two additional parameters to notifier_call_chain API namely
 - int nr_to_calls : Number of notifier_functions to be called.
 		     The don't care value is -1.

 - unsigned int *nr_calls : Records the total number of notifier_funtions
			    called by notifier_call_chain. The don't care
			    value is NULL.

[michal.k.k.piotrowski@gmail.com: build fix]
Credit: Andrew Morton <akpm@osdl.org>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:51 -07:00
Rafael J. Wysocki a3d25c275d PM: Separate hibernation code from suspend code
[ With Johannes Berg <johannes@sipsolutions.net> ]

Separate the hibernation (aka suspend to disk code) from the other suspend
code.  In particular:

 * Remove the definitions related to hibernation from include/linux/pm.h
 * Introduce struct hibernation_ops and a new hibernate() function to hibernate
   the system, defined in include/linux/suspend.h
 * Separate suspend code in kernel/power/main.c from hibernation-related code
   in kernel/power/disk.c and kernel/power/user.c (with the help of
   hibernation_ops)
 * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
John Anthony Kazos Jr f42df9e658 general: convert "kernel" subdirectory to UTF-8
Convert the "kernel" subdirectory of the tree to UTF-8. The only file
modified is <kernel/sys.c>.

Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:20 +02:00
Tom Alsberg 9926e4c743 CPU time limit patch / setrlimit(RLIMIT_CPU, 0) cheat fix
As discovered here today, the change in Kernel 2.6.17 intended to inhibit
users from setting RLIMIT_CPU to 0 (as that is equivalent to unlimited) by
"cheating" and setting it to 1 in such a case, does not make a difference,
as the check is done in the wrong place (too late), and only applies to the
profiling code.

On all systems I checked running kernels above 2.6.17, no matter what the
hard and soft CPU time limits were before, a user could escape them by
issuing in the shell (sh/bash/zsh) "ulimit -t 0", and then the user's
process was not ever killed.

Attached is a trivial patch to fix that.  Simply moving the check to a
slightly earlier location (specifically, before the line that actually
assigns the limit - *old_rlim = new_rlim), does the trick.

Do note that at least the zsh (but not ash, dash, or bash) shell has the
problem of "caching" the limits set by the ulimit command, so when running
zsh the fix will not immediately be evident - after entering "ulimit -t 0",
"ulimit -a" will show "-t: cpu time (seconds) 0", even though the actual
limit as returned by getrlimit(...) will be 1.  It can be verified by
opening a subshell (which will not have the values of the parent shell in
cache) and checking in it, or just by running a CPU intensive command like
"echo '65536^1048576' | bc" and verifying that it dumps core after one
second.

Regardless of whether that is a misfeature in the shell, perhaps it would
be better to return -EINVAL from setrlimit in such a case instead of
cheating and setting to 1, as that does not really reflect the actual state
of the process anymore.  I do not however know what the ground for that
decision was in the original 2.6.17 change, and whether there would be any
"backward" compatibility issues, so I preferred not to touch that right
now.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:12 -07:00
Johannes Berg ab3bfca7ab remove software_suspend()
Remove software_suspend() and all its users since
pm_suspend(PM_SUSPEND_DISK) should be equivalent and there's no point in
having two interfaces for the same thing.

The patch also changes the valid_state function to return 0 (false) for
PM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of
accepting it and having the whole thing fail later.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:59 -07:00
Eric W. Biederman 41487c65bf [PATCH] pid: replace do/while_each_task_pid with do/while_each_pid_task
There isn't any real advantage to this change except that it allows the old
functions to be removed.  Which is easier on maintenance and puts the code in
a more uniform style.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:32 -08:00
Eric W. Biederman ab521dc0f8 [PATCH] tty: update the tty layer to work with struct pid
Of kernel subsystems that work with pids the tty layer is probably the largest
consumer.  But it has the nice virtue that the assiation with a session only
lasts until the session leader exits.  Which means that no reference counting
is required.  So using struct pid winds up being a simple optimization to
avoid hash table lookups.

In the long term the use of pid_nr also ensures that when we have multiple pid
spaces mixed everything will work correctly.

Signed-off-by: Eric W. Biederman <eric@maxwell.lnxi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:32 -08:00
Robert P. J. Day 72fd4a35a8 [PATCH] Numerous fixes to kernel-doc info in source files.
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:

  * make multi-line initial descriptions single line
  * denote some function names, constants and structs as such
  * change erroneous opening '/*' to '/**' in a few places
  * reword some text for clarity

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:32 -08:00
Ingo Molnar 1b5180b651 [PATCH] notifiers: fix blocking_notifier_call_chain() scalability
while lock-profiling the -rt kernel i noticed weird contention during
mmap-intense workloads, and the tracer showed the following gem, in one
of our MM hotpaths:

 threaded-2771  1....   65us : sys_munmap (sysenter_do_call)
 threaded-2771  1....   66us : profile_munmap (sys_munmap)
 threaded-2771  1....   66us : blocking_notifier_call_chain (profile_munmap)
 threaded-2771  1....   66us : rt_down_read (blocking_notifier_call_chain)

ouch! a global rw-semaphore taken in one of the most performance-
sensitive codepaths of the kernel.  And i dont even have oprofile
enabled! All distro kernels have CONFIG_PROFILING enabled, so this
scalability problem affects the majority of Linux users.

The fix is to enhance blocking_notifier_call_chain() to only take the
lock if there appears to be work on the call-chain.

With this patch applied i get nicely saturated system, and much higher
munmap performance, on SMP systems.

And as a bonus this also fixes a similar scalability bottleneck in the
thread-exit codepath: profile_task_exit() ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 11:08:03 -08:00
Oleg Nesterov f020bc468f [PATCH] sys_setpgid: eliminate unnecessary do_each_task_pid(PIDTYPE_PGID)
All tasks in the process group have the same sid, we don't need to iterate
them all to check that the caller of sys_setpgid() doesn't change its
session.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:52 -08:00
Cedric Le Goater 937949d9ed [PATCH] add process_session() helper routine
Replace occurences of task->signal->session by a new process_session() helper
routine.

It will be useful for pid namespaces to abstract the session pid number.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
Peter Zijlstra 24ec839c43 [PATCH] tty: ->signal->tty locking
Fix the locking of signal->tty.

Use ->sighand->siglock to protect ->signal->tty; this lock is already used
by most other members of ->signal/->sighand.  And unless we are 'current'
or the tasklist_lock is held we need ->siglock to access ->signal anyway.

(NOTE: sys_unshare() is broken wrt ->sighand locking rules)

Note that tty_mutex is held over tty destruction, so while holding
tty_mutex any tty pointer remains valid.  Otherwise the lifetime of ttys
are governed by their open file handles.  This leaves some holes for tty
access from signal->tty (or any other non file related tty access).

It solves the tty SLAB scribbles we were seeing.

(NOTE: the change from group_send_sig_info to __group_send_sig_info needs to
       be examined by someone familiar with the security framework, I think
       it is safe given the SEND_SIG_PRIV from other __group_send_sig_info
       invocations)

[schwidefsky@de.ibm.com: 3270 fix]
[akpm@osdl.org: various post-viro fixes]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:38 -08:00
David Rientjes a09c17a6fd [PATCH] sys: remove unused variable
Remove unused 'new_ruid' variable.

Reported by David Binderman <dcb314@hotmail.com>.

Signed-off-by: David Rientjes <rientjes@cs.washington.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:44 -08:00
David Howells 65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Alan Stern e6a92013ba [PATCH] SRCU: report out-of-memory errors
Currently the init_srcu_struct() routine has no way to report out-of-memory
errors.  This patch (as761) makes it return -ENOMEM when the per-cpu data
allocation fails.

The patch also makes srcu_init_notifier_head() report a BUG if a notifier
head can't be initialized.  Perhaps it should return -ENOMEM instead, but
in the most likely cases where this might occur I don't think any recovery
is possible.  Notifier chains generally are not created dynamically.

[akpm@osdl.org: avoid statement-with-side-effect in macro]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:30 -07:00
Alan Stern eabc069401 [PATCH] Add SRCU-based notifier chains
This patch (as751) adds a new type of notifier chain, based on the SRCU
(Sleepable Read-Copy Update) primitives recently added to the kernel.  An
SRCU notifier chain is much like a blocking notifier chain, in that it must
be called in process context and its callout routines are allowed to sleep.
 The difference is that the chain's links are protected by the SRCU
mechanism rather than by an rw-semaphore, so calling the chain has
extremely low overhead: no memory barriers and no cache-line bouncing.  On
the other hand, unregistering from the chain is expensive and the chain
head requires special runtime initialization (plus cleanup if it is to be
deallocated).

SRCU notifiers are appropriate for notifiers that will be called very
frequently and for which unregistration occurs very seldom.  The proposed
"task notifier" scheme qualifies, as may some of the network notifiers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:30 -07:00
Cedric Le Goater 9ec52099e4 [PATCH] replace cad_pid by a struct pid
There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:25 -07:00
Serge E. Hallyn e9ff3990f0 [PATCH] namespaces: utsname: switch to using uts namespaces
Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
bibo,mao f2aa85a0cc [PATCH] disallow kprobes on notifier_call_chain
When kprobe is re-entered, the re-entered kprobe kernel path will will call
atomic_notifier_call_chain function, if this function is kprobed that will
incur numerous kprobe recursive fault.  This patch disallows kprobes on
atomic_notifier_call_chain function.

Signed-off-by: bibo, mao <bibo.mao@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:16 -07:00
Cal Peake 756184b7d7 [PATCH] CodingStyle cleanup for kernel/sys.c
Fix up kernel/sys.c to be consistent with CodingStyle and the rest of the
file.

Signed-off-by: Cal Peake <cp@absolutedigital.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:20 -07:00
Andi Kleen 34596dc9e5 [PATCH] Define vsyscall cache as blob to make clearer that user space shouldn't use it
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-30 01:47:55 +02:00
Cal Peake c9472e0f28 [PATCH] kill extraneous printk in kernel_restart()
Get rid of an extraneous printk in kernel_restart().

Signed-off-by: Cal Peake <cp@absolutedigital.net>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:16 -07:00
Andi Kleen 3cfc348bf9 [PATCH] x86: Add portable getcpu call
For NUMA optimization and some other algorithms it is useful to have a fast
to get the current CPU and node numbers in user space.

x86-64 added a fast way to do this in a vsyscall. This adds a generic
syscall for other architectures to make it a generic portable facility.

I expect some of them will also implement it as a faster vsyscall.

The cache is an optimization for the x86-64 vsyscall optimization. Since
what the syscall returns is an approximation anyways and user space
often wants very fast results it can be cached for some time.  The norma
methods to get this information in user space are relatively slow

The vsyscall is in a better position to manage the cache because it has direct
access to a fast time stamp (jiffies). For the generic syscall optimization
it doesn't help much, but enforce a valid argument to keep programs
portable

I only added an i386 syscall entry for now. Other architectures can follow
as needed.

AK: Also added some cleanups from Andrew Morton

Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:28 +02:00
Marcel Holtmann abf75a5033 [PATCH] Fix prctl privilege escalation and suid_dumpable (CVE-2006-2451)
Based on a patch from Ernie Petrides

During security research, Red Hat discovered a behavioral flaw in core
dump handling. A local user could create a program that would cause a
core file to be dumped into a directory they would not normally have
permissions to write to. This could lead to a denial of service (disk
consumption), or allow the local user to gain root privileges.

The prctl() system call should never allow to set "dumpable" to the
value 2. Especially not for non-privileged users.

This can be split into three cases:

  1) running as root -- then core dumps will already be done as root,
     and so prctl(PR_SET_DUMPABLE, 2) is not useful

  2) running as non-root w/setuid-to-root -- this is the debatable case

  3) running as non-root w/setuid-to-non-root -- then you definitely
     do NOT want "dumpable" to get set to 2 because you have the
     privilege escalation vulnerability

With case #2, the only potential usefulness is for a program that has
designed to run with higher privilege (than the user invoking it) that
wants to be able to create root-owned root-validated core dumps. This
might be useful as a debugging aid, but would only be safe if the program
had done a chdir() to a safe directory.

There is no benefit to a production setuid-to-root utility, because it
shouldn't be dumping core in the first place. If this is true, then the
same debugging aid could also be accomplished with the "suid_dumpable"
sysctl.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12 12:50:25 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Adrian Bunk 83cc5ed3c4 [PATCH] kernel/sys.c: cleanups
- proper prototypes for the following functions:
  - ctrl_alt_del()  (in include/linux/reboot.h)
  - getrusage()     (in include/linux/resource.h)
- make the following needlessly global functions static:
  - kernel_restart_prepare()
  - kernel_kexec()

[akpm@osdl.org: compile fix]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:06 -07:00
Alan Stern bbb1747d4e [PATCH] Allow raw_notifier callouts to unregister themselves
Since raw_notifier chains don't benefit from any centralized locking
protections, they shouldn't suffer from the associated limitations.  Under
some circumstances it might make sense for a raw_notifier callout routine
to unregister itself from the notifier chain.  This patch (as678) changes
the notifier core to allow for such things.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:01 -07:00
Jes Sorensen 55f4e8d156 [PATCH] kernel/sys.c doesn't need init.h
kernel/sys.c doesn't have anything in it relying on linux/init.h -
remove the include.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00
Linus Torvalds 45c091bb2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h
2006-06-22 22:11:30 -07:00
Ravikiran G Thirumalai de047c1bcd [PATCH] avoid tasklist_lock at getrusage for multithreaded case too
Avoid taking tasklist_lock for at getrusage for the multithreaded case too.
We don't need to take the tasklist lock for thread traversal of a process
since Oleg's do-__unhash_process-under-siglock.patch and related work.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:57 -07:00
Anton Blanchard 651d765d0b [PATCH] Add a prctl to change the endianness of a process.
This new prctl is intended for changing the execution mode of the
processor, on processors that support both a little-endian mode and a
big-endian mode.  It is intended for use by programs such as
instruction set emulators (for example an x86 emulator on PowerPC),
which may find it convenient to use the processor in an alternate
endianness mode when executing translated instructions.

Note that this does not imply the existence of a fully-fledged ABI for
both endiannesses, or of compatibility code for converting system
calls done in the non-native endianness mode.  The program is expected
to arrange for all of its system call arguments to be presented in the
native endianness.

Switching between big and little-endian mode will require some care in
constructing the instruction sequence for the switch.  Generally the
instructions up to the instruction that invokes the prctl system call
will have to be in the old endianness, and subsequent instructions
will have to be in the new endianness.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 21:24:13 +10:00
Eric W. Biederman 390e2ff077 [PATCH] Make setsid() more robust
The core problem: setsid fails if it is called by init.  The effect in 2.6.16
and the earlier kernels that have this problem is that if you do a "ps -j 1 or
ps -ej 1" you will see that init and several of it's children have process
group and session == 0.  Instead of process group == session == 1.  Despite
init calling setsid.

The reason it fails is that daemonize calls set_special_pids(1,1) on kernel
threads that are launched before /sbin/init is called.

The only remaining effect in that current->signal->leader == 0 for init
instead of 1.  And the setsid call fails.  No one has noticed because
/sbin/init does not check the return value of setsid.

In 2.4 where we don't have the pidhash table, and daemonize doesn't exist
setsid actually works for init.

I care a lot about pid == 1 not being a special case that we leave broken,
because of the container/jail work that I am doing.

- Carefully allow init (pid == 1) to call setsid despite the kernel using
  its session.

- Use find_task_by_pid instead of find_pid because find_pid taking a
  pidtype is going away.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Oleg Nesterov 7d7185c818 [PATCH] sys_times: don't take tasklist_lock
sys_times: don't take tasklist_lock

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00
Oleg Nesterov 35f5cad8c4 [PATCH] revert "Optimize sys_times for a single thread process"
This patch reverts 'CONFIG_SMP && thread_group_empty()' optimization in
sys_times().  The reason is that the next patch breaks memory ordering which
is needed for that optimization.

tasklist_lock in sys_times() will be eliminated completely by further patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00
Alan Stern e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Eric Dumazet d74beb9f33 [PATCH] Use unsigned int types for a faster bsearch
This patch avoids arithmetic on 'signed' types that are slower than
'unsigned'.  This saves space and cpu cycles.

size of kernel/sys.o before the patch (gcc-3.4.5)

    text    data     bss     dec     hex filename
   10924     252       4   11180    2bac kernel/sys.o

size of kernel/sys.o after the patch
    text    data     bss     dec     hex filename
   10903     252       4   11159    2b97 kernel/sys.o

I noticed that gcc-4.1.0 (from Fedora Core 5) even uses idiv instruction for
(a+b)/2 if a and b are signed.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:01 -08:00
Eric Dumazet 231bed2058 [PATCH] No need to protect current->group_info in sys_getgroups(), in_group_p() and in_egroup_p()
While doing some benchmarks of an Apache/PHP SMP server, I noticed high
oprofile numbers in in_group_p() and _atomic_dec_and_lock().

rank  percent
  1     4.8911 % __link_path_walk
  2     4.8503 % __d_lookup
*3     4.2911 % _atomic_dec_and_lock
  4     3.9307 % __copy_to_user_ll
  5     4.9004 % sysenter_past_esp
*6     3.3248 % in_group_p

It appears that in_group_p() does an uncessary

get_group_info(current->group_info); /* atomic_inc() */
  ... /* access current->group_info */
put_group_info(current->group_info); /* _atomic_dec_and_lock */

It is not necessary to do this, because the current task holds a reference
on its own group_info, and this reference cannot change during the lookup.

This patch deletes the get_group_info()/put_group_info() pair from
sys_getgroups(), in_group_p() and in_egroup_p() functions.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Tim Hockin <thockin@hockin.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:58 -08:00
Chris Wright 12b5989be1 [PATCH] refactor capable() to one implementation, add __capable() helper
Move capable() to kernel/capability.c and eliminate duplicate
implementations.  Add __capable() function which can be used to check for
capabiilty of any process.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:56 -08:00
Andrew Morton d3561f78fd [PATCH] RLIMIT_CPU: document wrong return value
Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when
it should.  I don't think we can fix this without a 2.7.x..

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:30 -08:00
Andrew Morton e0661111e5 [PATCH] RLIMIT_CPU: fix handling of a zero limit
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero
seconds.  But the spec says it should, and that's what 2.4.x does.

Fixing this for real would involve some complexity (such as adding a new
it-has-been-set flag to the task_struct, and testing that everwhere, instead
of overloading the value of it_prof_expires).

Given that a 2.4 kernel won't actually send the signal until one second has
expired anyway, let's just handle this case by treating the caller's
zero-seconds as one second.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:30 -08:00
Andrew Morton ec9e16bacd [PATCH] sys_setrlimit() cleanup
- Whitespace cleanups

- Make that expression comprehensible.

There's a potential logic change here: we do the "is it_prof_expires equal to
zero" test after converting it to seconds, rather than doing the comparison
between raw cputime_t's.

But given that it's in units of seconds anyway, that shouldn't change
anything.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:30 -08:00
Ingo Molnar 70522e121a [PATCH] sem2mutex: tty
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:11 -08:00
Ravikiran G Thirumalai 2dd0ebcd2a [PATCH] Avoid taking global tasklist_lock for single threadedprocess at getrusage()
Avoid taking the global tasklist_lock when possible, if a process is single
threaded during getrusage().  Any avoidance of tasklist_lock is good for
NUMA boxes (and possibly for large SMPs).  Thanks to Oleg Nesterov for
review and suggestions.

Signed-off-by: Nippun Goel <nippung@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:09 -08:00
Al Viro 4bb8089c86 [PATCH] kernel/sys.c NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07 20:57:47 -05:00
Len Brown 9fdb62af92 [ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi branches into release
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-24 17:52:48 -05:00
Randy.Dunlap c59ede7b78 [PATCH] move capable() to capability.h
- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Ingo Molnar e16885c5ad [PATCH] uninline capable()
Uninline capable().  Saves 2K of kernel text on a generic .config, and 1K on a
tiny config.  In addition it makes the use of capable more consistent between
CONFIG_SECURITY and !CONFIG_SECURITY

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Oleg Nesterov 0f59cc4a35 [PATCH] simplify k_getrusage()
Factor out common code for different RUSAGE_xxx cases.

Don't take ->sighand->siglock in RUSAGE_SELF case, suggested by Ravikiran G
Thirumalai <kiran@scalex86.org>.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:09 -08:00
Oleg Nesterov f7dd795e91 [PATCH] setpgid: should not accept ptraced childs
sys_setpgid() allows to change ->pgrp of ptraced childs.

'man setpgid' does not tell anything about that, so I consider
this behaviour is a bug.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:01 -08:00
Oren Laadan e19f247a3d [PATCH] setpgid: should work for sub-threads
setsid() does not work unless the calling process is a
thread_group_leader().

'man setpgid' does not tell anything about that, so I consider this
behaviour is a bug.

Signed-off-by: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:01 -08:00
Oleg Nesterov ee0acf90d3 [PATCH] setpgid: should work for sub-threads
setpgid(0, pgid) or setpgid(forked_child_pid, pgid) does not work unless
the calling process is a thread_group_leader().

'man setpgid' does not tell anything about that, so I consider this
behaviour is a bug.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:01 -08:00
Eric W. Biederman 5e38291d80 [PATCH] Don't attempt to power off if power off is not implemented
The problem.  It is expected that /sbin/halt -p works exactly like
/sbin/halt, when the kernel does not implement power off functionality.

The kernel can do a lot of work in the reboot notifiers and in
device_shutdown before we even get to machine_power_off.  Some of that
shutdown is not safe if you are leaving the power on, and it definitely
gets in the way of using sysrq or pressing ctrl-alt-del.  Since the
shutdown happens in generic code there is no way to fix this in
architecture specific code :(

Some machines are kernel oopsing today because of this.

The simple solution is to turn LINUX_REBOOT_CMD_POWER_OFF into
LINUX_REBOOT_CMD_HALT if power_off functionality is not implemented.

This has the unfortunate side effect of disabling the power off
functionality on architectures that leave pm_power_off to null and still
implement something in machine_power_off.  And it will break the build on
some architectures that don't have a pm_power_off variable at all.

On both counts I say tough.

For architectures like alpha that don't implement the pm_power_off variable
pm_power_off is declared in linux/pm.h and it is a generic part of our
power management code, and all architectures should implement it.

For architectures like parisc that have a default power off method in
machine_power_off if pm_power_off is not implemented or fails.  It is easy
enough to set the pm_power_off variable.  And nothing bad happens there,
the machines just stop powering off.

The current semantics are impossible without a flag at the top level so we
can avoid the problem code if a power off is not implemented.  pm_power_off
is as good a flag as any with the bonus that it works without modification
on at least x86, x86_64, powerpc, and ppc today.

Andrew can you pick this up and put this in the mm tree.  Kernels that
don't compile or don't power off seem saner than kernels that oops or
panic.  Until we get the arch specific patches for the problem
architectures this probably isn't smart to push into the stable kernel.
Unfortunately I don't have the time at the moment to walk through every
architecture and make them work.  And even if I did I couldn't test it :(

From: Hirokazu Takata <takata@linux-m32r.org>

    Add pm_power_off() for build fix of arch/m32r/kernel/process.c.

From: Miklos Szeredi <miklos@szeredi.hu>

    UML build fix

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:00 -08:00
Alexey Starikovskiy 729b4d4ce1 [ACPI] fix reboot upon suspend-to-disk
http://bugzilla.kernel.org/show_bug.cgi?id=4320

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-15 13:28:14 -05:00
Keshavamurthy Anil S 00d7c05ab1 [PATCH] kprobes: no probes on critical path
For Kprobes critical path is the path from debug break exception handler
till the control reaches kprobes exception code.  No probes can be
supported in this path as we will end up in recursion.

This patch prevents this by moving the below function to safe __kprobes
section onto which no probes can be inserted.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
David S. Miller 393b072587 [SPARC64]: Re-export uts_sem for solaris compat module.
Revert: b26b9bc582

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10 12:47:50 -08:00
Adrian Bunk b26b9bc582 [PATCH] unexport uts_sem
I didn't find any possible modular usage in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:07 -08:00
Randy Dunlap b8887e6e8c [PATCH] kernel-docs: fix kernel-doc format problems
Convert to proper kernel-doc format.

Some have extra blank lines (not allowed immed.  after the function name)
or need blank lines (after all parameters).  Function summary must be only
one line.

Colon (":") in a function description does weird things (causes kernel-doc
to think that it's a new section head sadly).

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:55 -08:00
Randy Dunlap 1e5d533142 [PATCH] more kernel-doc cleanups, additions
Various core kernel-doc cleanups:
- add missing function parameters in ipc, irq/manage, kernel/sys,
  kernel/sysctl, and mm/slab;
- move description to just above function for kernel_restart()

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:55 -08:00
Matt Helsley 9f46080c41 [PATCH] Process Events Connector
This patch adds a connector that reports fork, exec, id change, and exit
events for all processes to userspace.  It replaces the fork_advisor patch
that ELSA is currently using.  Applications that may find these events
useful include accounting/auditing (e.g.  ELSA), system activity monitoring
(e.g.  top), security, and resource management (e.g.  CKRM).

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:35 -08:00
Eric W. Biederman e4c94330e3 [PATCH] reboot: comment and factor the main reboot functions
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent.  Despite checking and double
checking my work it appears I missed an obvious one.

This first patch simply refactors the reboot routines so all of the
preparation for various kinds of reboots are in their own functions.
Making it very hard to get the various kinds of reboot out of sync.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:33 -07:00
Michael Kerrisk 2030c0fd3d [PATCH] PR_GET_DUMPABLE returns incorrect info
2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one
version of this patch can be found here
http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ).

This patch also made corresponding changes in kernel/sys.c to change the
prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was
modified from 0..1 to 0..2.

However, a corresponding change was not made for PR_GET_DUMPABLE: if the
dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that
the caller can't determine the true setting of this flag.

Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:01 -07:00
Jesper Juhl 0730ded5be [PATCH] remove a redundant variable in sys_prctl()
The patch removes a redundant variable `sig' from sys_prctl().

For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG
then the value of arg2 is assigned to an int variable named sig.  Then sig
is tested with valid_signal() and later used to set the value of
current->pdeath_signal .

There is no reason to use this intermediate variable since valid_signal()
takes a unsigned long argument, so it can handle being passed arg2
directly, and if the call to valid_signal is OK, then we know the value of
arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int
and thus there's no problem assigning it later to current->pdeath_signal
(which is an int).

The patch gets rid of the pointless variable `sig'.
This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my
system.

Patch has been compile tested, boot tested, and just to make damn sure I
didn't break anything I wrote a quick test app that calls
prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a
unsigned long, and it behaves as expected with and without the patch.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:32 -07:00
Benjamin Herrenschmidt c36f19e02a [PATCH] Remove suspend() calls from shutdown path
This removes the calls to device_suspend() from the shutdown path that
were added sometime during 2.6.13-rc*.  They aren't working properly on
a number of configs (I got reports from both ppc powerbook users and x86
users) causing the system to not shutdown anymore.

I think it isn't the right approach at the moment anyway.  We have
already a shutdown() callback for the drivers that actually care about
shutdown and the suspend() code isn't yet in a good enough shape to be
so much generalized.  Also, the semantics of suspend and shutdown are
slightly different on a number of setups and the way this was patched in
provides little way for drivers to cleanly differenciate.  It should
have been at least a different message.

For 2.6.13, I think we should revert to 2.6.12 behaviour and have a
working suspend back.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 08:20:47 -07:00
Eric W. Biederman 1108bae41e [PATCH] reboot: remove device_suspend(PMSG_FREEZE) from kernel_kexec
If device_suspend(PMSG_FREEZE) is not ready to be called in
kernel_restart it is definitely not ready to be called in the even more
fickle kernel_kexec.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 12:02:09 -07:00
Andrew Morton e4ff4d7f9d [PATCH] Avoid device suspend on reboot
My fairly ordinary x86 test box gets stuck during reboot on the
wait_for_completion() in ide_do_drive_cmd():

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:46:37 -07:00
Eric W. Biederman 7c9034735e [PATCH] Add emergency_restart()
When the kernel is working well and we want to restart cleanly
kernel_restart is the function to use.   But in many instances
the kernel wants to reboot when thing are expected to be working
very badly such as from panic or a software watchdog handler.

This patch adds the function emergency_restart() so that
callers can be clear what semantics they expect when calling
restart.  emergency_restart() is expected to be callable
from interrupt context and possibly reliable in even more
trying circumstances.

This is an initial generic implementation for all architectures.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman abcd9e51f5 [PATCH] Make ctrl_alt_del call kernel_restart to get a proper reboot.
It is obvious we wanted to call kernel_restart here
but since we don't have it the code was expanded inline and hasn't
been correct since sometime in 2.4.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman 4a00ea1e18 [PATCH] Refactor sys_reboot into reusable parts
Because the factors of sys_reboot don't exist people calling
into the reboot path duplicate the code badly, leading to
inconsistent expectations of code in the reboot path.

This patch should is just code motion.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman 47f61f397c [PATCH] Add missing device_suspsend(PMSG_FREEZE) calls.
In the recent addition of device_suspend calls into
sys_reboot two code paths were missed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman dc009d9243 [PATCH] kexec: add kexec syscalls
This patch introduces the architecture independent implementation the
sys_kexec_load, the compat_sys_kexec_load system calls.

Kexec on panic support has been integrated into the core patch and is
relatively clean.

In addition the hopefully architecture independent option
crashkernel=size@location has been docuemented.  It's purpose is to reserve
space for the panic kernel to live, and where no DMA transfer will ever be
setup to access.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Pavel Machek 620b032764 [PATCH] properly stop devices before poweroff
Without this patch, Linux provokes emergency disk shutdowns and
similar nastiness. It was in SuSE kernels for some time, IIRC.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:33 -07:00
David Howells 3e30148c3d [PATCH] Keys: Make request-key create an authorisation key
The attached patch makes the following changes:

 (1) There's a new special key type called ".request_key_auth".

     This is an authorisation key for when one process requests a key and
     another process is started to construct it. This type of key cannot be
     created by the user; nor can it be requested by kernel services.

     Authorisation keys hold two references:

     (a) Each refers to a key being constructed. When the key being
     	 constructed is instantiated the authorisation key is revoked,
     	 rendering it of no further use.

     (b) The "authorising process". This is either:

     	 (i) the process that called request_key(), or:

     	 (ii) if the process that called request_key() itself had an
     	      authorisation key in its session keyring, then the authorising
     	      process referred to by that authorisation key will also be
     	      referred to by the new authorisation key.

	 This means that the process that initiated a chain of key requests
	 will authorise the lot of them, and will, by default, wind up with
	 the keys obtained from them in its keyrings.

 (2) request_key() creates an authorisation key which is then passed to
     /sbin/request-key in as part of a new session keyring.

 (3) When request_key() is searching for a key to hand back to the caller, if
     it comes across an authorisation key in the session keyring of the
     calling process, it will also search the keyrings of the process
     specified therein and it will use the specified process's credentials
     (fsuid, fsgid, groups) to do that rather than the calling process's
     credentials.

     This allows a process started by /sbin/request-key to find keys belonging
     to the authorising process.

 (4) A key can be read, even if the process executing KEYCTL_READ doesn't have
     direct read or search permission if that key is contained within the
     keyrings of a process specified by an authorisation key found within the
     calling process's session keyring, and is searchable using the
     credentials of the authorising process.

     This allows a process started by /sbin/request-key to read keys belonging
     to the authorising process.

 (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or
     KEYCTL_NEGATE will specify a keyring of the authorising process, rather
     than the process doing the instantiation.

 (6) One of the process keyrings can be nominated as the default to which
     request_key() should attach new keys if not otherwise specified. This is
     done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_*
     constants. The current setting can also be read using this call.

 (7) request_key() is partially interruptible. If it is waiting for another
     process to finish constructing a key, it can be interrupted. This permits
     a request-key cycle to be broken without recourse to rebooting.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:19 -07:00
Christoph Lameter 71a2224d7d [PATCH] Optimize sys_times for a single thread process
Avoid taking the tasklist_lock in sys_times if the process is single
threaded.  In a NUMA system taking the tasklist_lock may cause a bouncing
cacheline if multiple independent processes continually call sys_times to
measure their performance.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:30 -07:00
Alan Cox d6e7114481 [PATCH] setuid core dump
Add a new `suid_dumpable' sysctl:

This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are

0 - (default) - traditional behaviour.  Any process which has changed
    privilege levels or is execute only will not be dumped

1 - (debug) - all processes dump core when possible.  The core dump is
    owned by the current user and no security is applied.  This is intended
    for system debugging situations only.  Ptrace is unchecked.

2 - (suidsafe) - any binary which normally would not be dumped is dumped
    readable by root only.  This allows the end user to remove such a dump but
    not access it directly.  For security reasons core dumps in this mode will
    not overwrite one another or other files.  This mode is appropriate when
    adminstrators are attempting to debug problems in a normal environment.

(akpm:

> > +EXPORT_SYMBOL(suid_dumpable);
>
> EXPORT_SYMBOL_GPL?

No problem to me.

> >  	if (current->euid == current->uid && current->egid == current->gid)
> >  		current->mm->dumpable = 1;
>
> Should this be SUID_DUMP_USER?

Actually the feedback I had from last time was that the SUID_ defines
should go because its clearer to follow the numbers. They can go
everywhere (and there are lots of places where dumpable is tested/used
as a bool in untouched code)

> Maybe this should be renamed to `dump_policy' or something.  Doing that
> would help us catch any code which isn't using the #defines, too.

Fair comment. The patch was designed to be easy to maintain for Red Hat
rather than for merging. Changing that field would create a gigantic
diff because it is used all over the place.

)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:26 -07:00
Domen Puncer ebe8b54134 [PATCH] correctly name the Shell sort
As per http://www.nist.gov/dads/HTML/shellsort.html, this should be
referred to as a Shell sort.  Shell-Metzner is a misnomer.

Signed-off-by: Daniel Dickman <didickman@yahoo.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:50 -07:00
Jesper Juhl 7ed20e1ad5 [PATCH] convert that currently tests _NSIG directly to use valid_signal()
Convert most of the current code that uses _NSIG directly to instead use
valid_signal().  This avoids gcc -W warnings and off-by-one errors.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Matt Mackall e43379f10b [PATCH] nice and rt-prio rlimits
Add a pair of rlimits for allowing non-root tasks to raise nice and rt
priorities. Defaults to traditional behavior. Originally written by
Chris Wright.

The patch implements a simple rlimit ceiling for the RT (and nice) priorities
a task can set.  The rlimit defaults to 0, meaning no change in behavior by
default.  A value of 50 means RT priority levels 1-50 are allowed.  A value of
100 means all 99 privilege levels from 1 to 99 are allowed.  CAP_SYS_NICE is
blanket permission.

(akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for
tips on integrating this with PAM).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:00 -07:00
akpm@osdl.org d59dd4620f [PATCH] use smp_mb/wmb/rmb where possible
Replace a number of memory barriers with smp_ variants.  This means we won't
take the unnecessary hit on UP machines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:47 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00