Currently, when adding memory, we create entries in /sys/firmware/memmap/
as "System RAM". This will lead to kexec-tools to add that memory to the
fixed-up initial memmap for a kexec kernel (loaded via kexec_load()). The
memory will be considered initial System RAM by the kexec'd kernel and can
no longer be reconfigured. This is not what happens during a real reboot.
Let's add our memory via add_memory_driver_managed() now, so we won't
create entries in /sys/firmware/memmap/ and indicate the memory as "System
RAM (kmem)" in /proc/iomem. This allows everybody (especially
kexec-tools) to identify that this memory is special and has to be treated
differently than ordinary (hotplugged) System RAM.
Before configuring the namespace:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-33fffffff : namespace0.0
3280000000-32ffffffff : PCI Bus 0000:00
After configuring the namespace:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
After loading kmem before this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM
3280000000-32ffffffff : PCI Bus 0000:00
After loading kmem after this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM (kmem)
3280000000-32ffffffff : PCI Bus 0000:00
After a proper reboot:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
Within the kexec kernel before this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : System RAM
3280000000-32ffffffff : PCI Bus 0000:00
Within the kexec kernel after this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
/sys/firmware/memmap/ before this change:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
0000000150000000-0000000340000000 (System RAM)
/sys/firmware/memmap/ after a proper reboot:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
/sys/firmware/memmap/ after this change:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
kexec-tools already seem to basically ignore any System RAM that's not on
top level when searching for areas to place kexec images - but also for
determining crash areas to dump via kdump. Changing the resource name
won't have an impact.
Handle unloading of the driver after memory hotremove failed properly, by
duplicating the string if necessary.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200508084217.9160-5-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Assume we have kmem configured and loaded:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory$
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM
Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.
[root@localhost ~]# rmmod kmem
[ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
...
[ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot
Now, we can reconfigure the namespace:
[root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
[ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
[ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
...
This fails as expected due to the busy memory resource, and the memory
cannot be used. However, the dax0.0 device is removed, and along its
name.
The name of the memory resource now points at freed memory (name of the
device):
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : �_�^7_��/_��wR��WQ���^��� ...
150000000-33fffffff : System RAM
We have to make sure to duplicate the string. While at it, remove the
superfluous setting of the name and fixup a stale comment.
Fixes: 9f960da72b ("device-dax: "Hotremove" persistent memory that is used like normal RAM")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.3]
Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.
This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.
To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver. So, operations should look like this:
echo offline > /sys/devices/system/memory/memoryN/state
...
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.
Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series ""Hotremove" persistent memory", v6.
Recently, adding a persistent memory to be used like a regular RAM was
added to Linux. This work extends this functionality to also allow hot
removing persistent memory.
We (Microsoft) have an important use case for this functionality.
The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s). Yet, there
is a userland state that is expensive to recreate (~2G).
The solution is to boot machines with 2G preserved for persistent
memory.
Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime. Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.
The series of operations look like this:
1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
and free ramdisk.
2. Convert raw pmem0 to devdax
ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
echo offline > /sys/devices/system/memoryXXX/state
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
ndctl create-namespace --mode raw -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
zero memory in pmem0 region (These machines have only regular
volatile memory). So to have pmem0 device either memmap kernel
parameter is used, or devices nodes in dtb are specified.
This patch (of 3):
When add_memory() fails, the resource and the memory should be freed.
Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b030 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is intended for use with NVDIMMs that are physically persistent
(physically like flash) so that they can be used as a cost-effective
RAM replacement. Intel Optane DC persistent memory is one
implementation of this kind of NVDIMM.
Currently, a persistent memory region is "owned" by a device driver,
either the "Direct DAX" or "Filesystem DAX" drivers. These drivers
allow applications to explicitly use persistent memory, generally
by being modified to use special, new libraries. (DIMM-based
persistent memory hardware/software is described in great detail
here: Documentation/nvdimm/nvdimm.txt).
However, this limits persistent memory use to applications which
*have* been modified. To make it more broadly usable, this driver
"hotplugs" memory into the kernel, to be managed and used just like
normal RAM would be.
To make this work, management software must remove the device from
being controlled by the "Device DAX" infrastructure:
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
and then tell the new driver that it can bind to the device:
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
After this, there will be a number of new memory sections visible
in sysfs that can be onlined, or that may get onlined by existing
udev-initiated memory hotplug rules.
This rebinding procedure is currently a one-way trip. Once memory
is bound to "kmem", it's there permanently and can not be
unbound and assigned back to device_dax.
The kmem driver will never bind to a dax device unless the device
is *explicitly* bound to the driver. There are two reasons for
this: One, since it is a one-way trip, it can not be undone if
bound incorrectly. Two, the kmem driver destroys data on the
device. Think of if you had good data on a pmem device. It
would be catastrophic if you compile-in "kmem", but leave out
the "device_dax" driver. kmem would take over the device and
write volatile data all over your good data.
This inherits any existing NUMA information for the newly-added
memory from the persistent memory device that came from the
firmware. On Intel platforms, the firmware has guarantees that
require each socket's persistent memory to be in a separate
memory-only NUMA node. That means that this patch is not expected
to create NUMA nodes, but will simply hotplug memory into existing
nodes.
Because NUMA nodes are created, the existing NUMA APIs and tools
are sufficient to create policies for applications or memory areas
to have affinity for or an aversion to using this memory.
There is currently some metadata at the beginning of pmem regions.
The section-size memory hotplug restrictions, plus this small
reserved area can cause the "loss" of a section or two of capacity.
This should be fixable in follow-on patches. But, as a first step,
losing 256MB of memory (worst case) out of hundreds of gigabytes
is a good tradeoff vs. the required code to fix this up precisely.
This calculation is also the reason we export
memory_block_size_bytes().
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
David Hildenbrand