In csum_dirty_buffer, we first get eb from page->private.
Then we check if the page is the first page of eb. Later
we check it again. Remove the repeated check here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Alloc_dummy_extent_buffer will not free the first page in the eb array if we
fail to allocate a page, fix this. Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
It's just annoying and the user will have gotten a nice OOM killer message
so they are already fully aware they are screwed :). Thanks,
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Get rid of the BUG_ON(ret == -ENOMEM) in __extent_read_full_page. Thanks,
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We were freeing non-existent pages which was causing a panic for a user who
was suffering from ENOMEM. This patch fixes the problem. Thanks,
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
So far the return code of barrier_all_devices() is ignored, which
means that errors are ignored. The result can be a corrupt
filesystem which is not consistent.
This commit adds code to evaluate the return code of
barrier_all_devices(). The normal btrfs_error() mechanism is used to
switch the filesystem into read-only mode when errors are detected.
In order to decide whether barrier_all_devices() should return
error or success, the number of disks that are allowed to fail the
barrier submission is calculated. This calculation accounts for the
worst RAID level of metadata, system and data. If single, dup or
RAID0 is in use, a single disk error is already considered to be
fatal. Otherwise a single disk error is tolerated.
The calculation of the number of disks that are tolerated to fail
the barrier operation is performed when the filesystem gets mounted,
when a balance operation is started and finished, and when devices
are added or removed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
In check-integrity, detect when a superblock is written that points
to blocks that have not been written to disk due to I/O write errors.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
If a filesystem is mounted with compression and then remounted by adding nodatacow,
the compression is disabled but the compress flag is still visible.
Also, if a filesystem is mounted with nodatacow and then remounted with compression,
nodatacow flag is still present but it's not active.
This patch:
- removes compress flags and notifies that the compression has been disabled if the
filesystem is mounted with nodatacow
- removes nodatacow and nodatasum flags if mounted with compress.
Signed-off-by: Andrei Popa <andrei.popa@i-neo.ro>
We can just copy the in memory inode into the tree log directly, no sense in
updating the fs tree so we can copy it into the tree log tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When building btrfs from kernel code, it will report:
fs/btrfs/extent_io.h:281: warning: 'extent_buffer_page' declared inline after being called
fs/btrfs/extent_io.h:281: warning: previous declaration of 'extent_buffer_page' was here
fs/btrfs/extent_io.h:280: warning: 'num_extent_pages' declared inline after being called
fs/btrfs/extent_io.h:280: warning: previous declaration of 'num_extent_pages' was here
because of the wrong declaration of inline functions.
Signed-off-by: Robin Dong <sanbai@taobao.com>
I don't think we have the same problem that this was supposed to fix
originally since we can allocate chunks in the enospc path now. This code
is causing us to constantly commit the transaction as we get close to using
all of our available space in our currently allocated chunks, instead of
allocating another chunk and carrying on with life, which is not nice for
performance. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We should confirm the value of extent_map before calling
trace_btrfs_get_extent() because the value of extent_map has the
possibility of NULL.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
When we truncate existing items in the tree log we've been searching for
each individual item and removing them. This is unnecessary churn and
searching, just keep track of the slot we are on and how many items we need
to delete and delete them all at once. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The tree logging stuff was looking up csums to copy over for prealloc
extents which is just work we don't need to be doing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Everytime we write out dirty pages we search for an offset in the tree,
convert the bits in the state, and then when we wait we search for the
offset again and clear the bits. So for every dirty range in the io tree we
are doing 4 rb searches, which is suboptimal. With this patch we are only
doing 2 searches for every cycle (modulo weird things happening). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
For some reason we unlock everything except the leaf we are on, set the path
blocking and then add the extent item for the extent we just finished
writing. I can't for the life of me figure out why we would want to do
this, and the history doesn't really indicate that there was a real reason
for it, so just remove it. This will reduce our tree lock contention on
heavy writes. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There are a coule scenarios where farming metadata csumming off to an async
thread doesn't help. The first is if our processor supports crc32c, in
which case the csumming will be fast and so the overhead of the async model
is not worth the cost. The other case is for our tree log. We will be
making that stuff dirty and writing it out and waiting for it immediately.
Even with software crc32c this gives me a ~15% increase in speed with O_SYNC
workloads. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
commit 7ca4be45a0 limited csum items to
PAGE_CACHE_SIZE. It used min() with incompatible types in 32bit which
generates warnings:
fs/btrfs/file-item.c: In function ‘btrfs_csum_file_blocks’:
fs/btrfs/file-item.c:717: warning: comparison of distinct pointer types lacks a cast
This uses min_t(u32,) to fix the warnings. u32 seemed reasonable
because btrfs_root->leafsize is u32 and PAGE_CACHE_SIZE is unsigned
long.
Signed-off-by: Zach Brown <zab@zabbo.net>
Running delayed refs is faster than running delalloc, so lets do that first
to try and reclaim space. This makes my fs_mark test about 20% faster.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
With the following debug patch:
static int btrfs_freeze(struct super_block *sb)
{
+ struct btrfs_fs_info *fs_info = btrfs_sb(sb);
+ struct btrfs_transaction *trans;
+
+ spin_lock(&fs_info->trans_lock);
+ trans = fs_info->running_transaction;
+ if (trans) {
+ printk("Transid %llu, use_count %d, num_writer %d\n",
+ trans->transid, atomic_read(&trans->use_count),
+ atomic_read(&trans->num_writers));
+ }
+ spin_unlock(&fs_info->trans_lock);
return 0;
}
I found there was a orphan transaction after the freeze operation was done.
It is because the transaction may not be committed when the transaction handle
end even though it is the last handle of the current transaction. This design
avoid committing the transaction frequently, but also introduce the above
problem.
So I add btrfs_attach_transaction() which can catch the current transaction
and commit it. If there is no transaction, it will return ENOENT, and do not
anything.
This function also can be used to instead of btrfs_join_transaction_freeze()
because it don't increase the writer counter and don't start a new transaction,
so it also can fix the deadlock between sync and freeze.
Besides that, it is used to instead of btrfs_join_transaction() in
transaction_kthread(), because if there is no transaction, the transaction
kthread needn't anything.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This patch add a type field into the transaction handle structure,
in this way, we needn't implement various end-transaction functions
and can make the code more simple and readable.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This patch fixes memory leak of the transaction handle which happened
when starting transaction failed on a freezed fs.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The iterate_irefs in backref.c is used to build path components from inode
refs. This patch adds code to iterate extended refs as well.
I had modify the callback function signature to abstract out some of the
differences between ref structures. iref_to_path() also needed similar
changes.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
This patch adds basic support for extended inode refs. This includes support
for link and unlink of the refs, which basically gets us support for rename
as well.
Inode creation does not need changing - extended refs are only added after
the ref array is full.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().
Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Moved part of the code into a sub function and replaced most of the gotos
by ifs, hoping that it will be easier to read now.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
I started hitting warnings when running xfstest 68 in a loop because there
were EM's that were not lined up properly with the physical extents. This
is ok, if we do something like punch a hole or write to a preallocated space
or something like that we can have an EM that doesn't cover the entire
physical extent. So fix the tree logging stuff to cope with this case so we
don't just commit the transaction. With this patch I no longer see the
warnings from the tree logging code. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Call btrfs_abort_transaction as early as possible when an error
condition is detected, that way the line number reported is useful
and we're not clueless anymore which error path led to the abort.
Signed-off-by: David Sterba <dsterba@suse.cz>
The macro btrfs_abort_transaction() can get the line number of the code
where the problem happens, so we should invoke it in the place that the
error occurs, or we will lose the line number.
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Btrfs uses inclusive range end for lock_extent(), unlock_extent() and
related functions, so we made off-by-one errors in file clone.
This fixes it and also fixes some style problems.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Hi,
the patch si simple, but it has user visible impact and I'm not quite sure how
to resolve it.
In short, $subj says it, chattr -C supports it and we want to use it.
The conditions that acutally allow to change the NOCOW flag are clear. What if
I try to set the flag on a file that is not empty? Options:
1) whole ioctl will fail, EINVAL
2.1) ioctl will succeed, the NOCOW flag will be silently removed, but the file
will stay COW-ed and checksummed
2.2) ioctl will succeed, flag will not be removed and a syslog message will
warn that the COW flag has not been changed
2.2.1) dtto, no syslog message
Man page of chattr states that
"If it is set on a file which already has data blocks, it is undefined when
the blocks assigned to the file will be fully stable."
Yes, it's undefined and with current implementation it'll never happen. So from
this end, the user cannot expect anything. I'm trying to find a reasonable
behaviour, so that a command like 'chattr -R -aijS +C' to tweak a broad set of
flags in a deep directory does not fail unnecessarily and does not pollute the
log.
My personal preference is 2.2.1, but my dev's oppinion is skewed, not counting
the fact that I know the code and otherwise would look there before consulting
the documentation.
The patch implements 2.2.1.
david
-------------8<-------------------
From: David Sterba <dsterba@suse.cz>
It's safe to turn off checksums for a zero sized file.
http://thread.gmane.org/gmane.comp.file-systems.btrfs/18030
"We cannot switch on NODATASUM for a file that already has extents that
are checksummed. The invariant here is that either all the extents or
none are checksummed.
Theoretically it's possible to add/remove all checksums from a given
file, but it's a potentially longtime operation, the file has to be in
some intermediate state where the checksums partially exist but have to
be ignored (for the csum->nocsum) until the file is fully converted,
this brings more special cases to extent handling, it has to survive
power failure and remain consistent, and probably needs to be restarted
after next mount."
Signed-off-by: David Sterba <dsterba@suse.cz>
I saw the warning in btrfs_drop_extent_cache where our end is less than our
start while running xfstests 68 in a loop. This is because we
unconditionally do drop_end = min(end, extent_end) in
__btrfs_drop_extents(), even though we may not have found an extent in the
range we were looking to drop. So keep track of wether or not we found
something, and if we didn't just use our end. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We do not need to do anything special to freeze or unfreeze, it's all taken
care of by the generic work, and what we currently have is wrong anyway
since we shouldn't be returnning to userspace with mutexes held anyway.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The btree inode has it's own write cache pages so we can remove this write
cache pages hook as it's not used. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We can race when checking wether PagePrivate is set on a page and we
actually have an eb saved in the pages private pointer. We could have
easily written out this page and released it in the time that we did the
pagevec lookup and actually got around to looking at this page. So use
mapping->private_lock to ensure we get a consistent view of the
page->private pointer. This is inline with the alloc and releasepage paths
which use private_lock when manipulating page->private. Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Dave Sterba pointed out a sleeping while atomic bug while doing fsync. This
is because I'm an idiot and didn't realize that rwlock's were spin locks, so
we've been holding this thing while doing allocations and such which is not
good. This patch fixes this by dropping the write lock before we do
anything heavy and re-acquire it when it is done. We also need to take a
ref on the em's in case their corresponding pages are evicted and mark them
as being logged so that releasepage does not remove them and doesn't remove
them from our local list. Thanks,
Reported-by: Dave Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
So we start our freeze, somebody comes in and does an fsync() on a file
where we have to commit a transaction for whatever reason, and we will
deadlock because the freeze is waiting on FS_FREEZE people to stop writing
to the file system, but the transaction is waiting for its free space inodes
to be written out, which are in turn waiting on sb_start_intwrite while
trying to write the file extents. To fix this we'll just skip the
sb_start_intwrite() if we TRANS_JOIN_NOLOCK since we're being waited on by a
transaction commit so we're safe wrt to freeze and this will keep us from
deadlocking. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I screwed this up, there is a race between checking if there is a running
transaction and actually starting a transaction in sync where we could race
with a freezer and get ourselves into trouble. To fix this we need to make
a new join type to only do the try lock on the freeze stuff. If it fails
we'll return EPERM and just return from sync. This fixes a hang Liu Bo
reported when running xfstest 68 in a loop. Thanks,
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A subvolume cannot be deleted via rmdir, but the error code ENOTEMPTY
is confusing. Return EPERM instead, as this is not permitted.
Signed-off-by: David Sterba <dsterba@suse.cz>
Using for_each_set_bit_from() to simplify the code.
spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Unnecessary lookup_extent_mapping() is removed because an error is
returned to the caller.
This patch was made based on the advice from Stefan Behrens, thanks.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Pull vfs update from Al Viro:
- big one - consolidation of descriptor-related logics; almost all of
that is moved to fs/file.c
(BTW, I'm seriously tempted to rename the result to fd.c. As it is,
we have a situation when file_table.c is about handling of struct
file and file.c is about handling of descriptor tables; the reasons
are historical - file_table.c used to be about a static array of
struct file we used to have way back).
A lot of stray ends got cleaned up and converted to saner primitives,
disgusting mess in android/binder.c is still disgusting, but at least
doesn't poke so much in descriptor table guts anymore. A bunch of
relatively minor races got fixed in process, plus an ext4 struct file
leak.
- related thing - fget_light() partially unuglified; see fdget() in
there (and yes, it generates the code as good as we used to have).
- also related - bits of Cyrill's procfs stuff that got entangled into
that work; _not_ all of it, just the initial move to fs/proc/fd.c and
switch of fdinfo to seq_file.
- Alex's fs/coredump.c spiltoff - the same story, had been easier to
take that commit than mess with conflicts. The rest is a separate
pile, this was just a mechanical code movement.
- a few misc patches all over the place. Not all for this cycle,
there'll be more (and quite a few currently sit in akpm's tree)."
Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
MAX_LFS_FILESIZE should be a loff_t
compat: fs: Generic compat_sys_sendfile implementation
fs: push rcu_barrier() from deactivate_locked_super() to filesystems
btrfs: reada_extent doesn't need kref for refcount
coredump: move core dump functionality into its own file
coredump: prevent double-free on an error path in core dumper
usb/gadget: fix misannotations
fcntl: fix misannotations
ceph: don't abuse d_delete() on failure exits
hypfs: ->d_parent is never NULL or negative
vfs: delete surplus inode NULL check
switch simple cases of fget_light to fdget
new helpers: fdget()/fdput()
switch o2hb_region_dev_write() to fget_light()
proc_map_files_readdir(): don't bother with grabbing files
make get_file() return its argument
vhost_set_vring(): turn pollstart/pollstop into bool
switch prctl_set_mm_exe_file() to fget_light()
switch xfs_find_handle() to fget_light()
switch xfs_swapext() to fget_light()
...
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All increments and decrements are under the same spinlock - have to be,
since they need to protect the radix_tree it's found in. Just use
int, no need to wank with kref...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
This reverts commit 0885ef5b56
After applying the above patch, the performance slowed down because the dirty
page flush can only be done by one task, so revert it.
The following is the test result of sysbench:
Before After
24MB/s 39MB/s
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Everybody is just making stuff up, and it's just used to see if we really do
need to alloc a chunk, and since we do this when we already know we really
do it's just a waste of space. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
So we have lots of places where we try to preallocate chunks in order to
make sure we have enough space as we make our allocations. This has
historically meant that we're constantly tweaking when we should allocate a
new chunk, and historically we have gotten this horribly wrong so we way
over allocate either metadata or data. To try and keep this from happening
we are going to make it so that the block group item insertion is done out
of band at the end of a transaction. This will allow us to create chunks
even if we are trying to make an allocation for the extent tree. With this
patch my enospc tests run faster (didn't expect this) and more efficiently
use the disk space (this is what I wanted). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
For immutable bio vecs, I've been auditing and removing bi_idx
references. These were harmless, but removing them will make auditing
easier.
scrub_bio_end_io_worker() was open coding a bio_reset() - but this
doesn't appear to have been needed for anything as right after it does a
bio_put(), and perusing the code it doesn't appear anything else was
holding a reference to the bio.
The other use end_bio_extent_readpage() was just for a pr_debug() -
changed it to something that might be a bit more useful.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Chris Mason <chris.mason@oracle.com>
CC: Stefan Behrens <sbehrens@giantdisaster.de>
When we wrote some data by compress mode into a btrfs filesystem which was full
of the fragments, the kernel will report:
BTRFS warning (device xxx): Aborting unused transaction.
The reason is:
We can not find a long enough free space to store the compressed data because
of the fragmentary free space, and the compressed data can not be splited,
so the kernel outputed the above message.
In fact, btrfs can deal with this problem very well: it fall back to
uncompressed IO, split the uncompressed data into small ones, and then
store them into to the fragmentary free space. So we shouldn't output the
above warning message.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Wade Cline reported a problem where he was getting garbage and warnings when
writing to a preallocated range via O_DIRECT. This is because we weren't
creating our normal pinned extent_map for the range we were writing to,
which was causing all sorts of issues. This patch fixes the problem and
makes his testcase much happier. Thanks,
Reported-by: Wade Cline <clinew@linux.vnet.ibm.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Sage reported the following lockdep backtrace
=====================================
[ BUG: bad unlock balance detected! ]
3.6.0-rc2-ceph-00171-gc7ed62d #1 Not tainted
-------------------------------------
btrfs-cleaner/7607 is trying to release lock (sb_internal) at:
[<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
but there are no more locks to release!
other info that might help us debug this:
1 lock held by btrfs-cleaner/7607:
#0: (&fs_info->cleaner_mutex){+.+...}, at: [<ffffffffa003b405>] cleaner_kthread+0x95/0x120 [btrfs]
stack backtrace:
Pid: 7607, comm: btrfs-cleaner Not tainted 3.6.0-rc2-ceph-00171-gc7ed62d #1
Call Trace:
[<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
[<ffffffff810afa9e>] print_unlock_inbalance_bug+0xfe/0x110
[<ffffffff810b289e>] lock_release_non_nested+0x1ee/0x310
[<ffffffff81172f9b>] ? kmem_cache_free+0x7b/0x160
[<ffffffffa004106c>] ? put_transaction+0x8c/0x130 [btrfs]
[<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
[<ffffffff810b2a95>] lock_release+0xd5/0x220
[<ffffffff81173071>] ? kmem_cache_free+0x151/0x160
[<ffffffff8117d9ed>] __sb_end_write+0x7d/0x90
[<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
[<ffffffff81079850>] ? __init_waitqueue_head+0x60/0x60
[<ffffffff81634c6b>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffffa0042758>] __btrfs_end_transaction+0x368/0x3c0 [btrfs]
[<ffffffffa0042808>] btrfs_end_transaction_throttle+0x18/0x20 [btrfs]
[<ffffffffa00318f0>] btrfs_drop_snapshot+0x410/0x600 [btrfs]
[<ffffffff8132babd>] ? do_raw_spin_unlock+0x5d/0xb0
[<ffffffffa00430ef>] btrfs_clean_old_snapshots+0xaf/0x150 [btrfs]
[<ffffffffa003b405>] ? cleaner_kthread+0x95/0x120 [btrfs]
[<ffffffffa003b419>] cleaner_kthread+0xa9/0x120 [btrfs]
[<ffffffffa003b370>] ? btrfs_destroy_delayed_refs.isra.102+0x220/0x220 [btrfs]
[<ffffffff810791ee>] kthread+0xae/0xc0
[<ffffffff810b379d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff8163e744>] kernel_thread_helper+0x4/0x10
[<ffffffff81635430>] ? retint_restore_args+0x13/0x13
[<ffffffff81079140>] ? flush_kthread_work+0x1a0/0x1a0
[<ffffffff8163e740>] ? gs_change+0x13/0x13
This is because the throttle stuff can commit the transaction, which expects to
be the one stopping the intwrite stuff, but we've already done it in the
__btrfs_end_transaction. Moving the sb_end_intewrite after this logic makes the
lockdep go away. Thanks,
Tested-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This is the change of the kernel side.
Translation of logical to inode used to have an upper limit 4k on
inode container's size, but the limit is not large enough for a data
with a great many of refs, so when resolving logical address,
we can end up with
"ioctl ret=0, bytes_left=0, bytes_missing=19944, cnt=510, missed=2493"
This changes to regard 64k as the upper limit and use vmalloc instead of
kmalloc to get memory more easily.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag.
It is possible to lose our errors because
(-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true.
I'm not sure if it is on purpose, it just looks too hacky if it is.
I'd rather use a real flag and a 'ret' to catch errors.
Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Liu Bo <liub.liubo@gmail.com>
As ref cache has been removed from btrfs, there is no user on
its lock and its check.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
When we delete a inode, we will remove all the delayed items including delayed
inode update, and then truncate all the relative metadata. If there is lots of
metadata, we will end the current transaction, and start a new transaction to
truncate the left metadata. In this way, we will leave a inode item that its
link counter is > 0, and also may leave some directory index items in fs/file tree
after the current transaction ends. In other words, the metadata in this fs/file tree
is inconsistent. If we create a snapshot for this tree now, we will find a inode with
corrupted metadata in the new snapshot, and we won't continue to drop the left metadata,
because its link counter is not 0.
We fix this problem by updating the inode item before the current transaction ends.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
I noticed I was seeing large lags when running my torrent test in a vm on my
laptop. While trying to make it lag less I noticed that our overcommit math
was taking into account the number of bytes we wanted to reclaim, not the
number of bytes we actually wanted to allocate, which means we wouldn't
overcommit as often. This patch fixes the overcommit math and makes
shrink_delalloc() use that logic so that it will stop looping faster. We
still have pretty high spikes of latency, but the test now takes 3 minutes
less time (about 5% faster). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Mitch reported a problem where you could get an ENOSPC error when untarring
a kernel git tree onto a 16gb file system with compress-force=zlib. This is
because compression is a huge pain, it will return from ->writepages()
without having actually created any ordered extents. To get around this we
check to see if the async submit counter is up, and if it is wait until it
drops to 0 before doing our normal ordered wait dance. With this patch I
can now untar a kernel git tree onto a 16gb file system without getting
ENOSPC errors. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We're going to use this flag EXTENT_DEFRAG to indicate which range
belongs to defragment so that we can implement snapshow-aware defrag:
We set the EXTENT_DEFRAG flag when dirtying the extents that need
defragmented, so later on writeback thread can differentiate between
normal writeback and writeback started by defragmentation.
Original-Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
ulist_alloc() has the possibility of returning NULL.
So, it is necessary to check the return value.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
When we ran fsstress(a program in xfstests), the filesystem hung up when it
is full. It was because the space reserved in btrfs_fallocate() was wrong,
btrfs_fallocate() just used the size of the pre-allocation to reserve the
space, didn't took the block size aligning into account, so the size of
the reserved space was less than the allocated space, it caused the over
reserve problem and made the filesystem hung up when invoking cow_file_range().
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Though we dump the stack information when aborting a unused transaction
handle, we don't know the correct place where we decide to abort the
transaction handle if one function has several place where the transaction
abort function is invoked and jumps to the same place after this call.
And beside that we also don't know the reason why we jump to abort
the current handle. So I modify the transaction abort function and make
it output the function name, line and error information.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
We forget to protect ->log_batch when syncing a file, this patch fix
this problem by atomic operation. And ->log_batch is used to check
if there are parallel sync operations or not, so it is unnecessary to
reset it to 0 after the sync operation of the current log tree complete.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
We should insert/update 6 items(root ref, root backref, dir item, dir index,
root item and parent inode) when creating a snapshot, not 5 items, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The snapshot should be the image of the fs tree before it was created,
so the metadata of the snapshot should not exist in the its tree. But now, we
found the directory item and directory name index is in both the snapshot tree
and the fs tree. It introduces some problems and makes the users feel strange:
# mkfs.btrfs /dev/sda1
# mount /dev/sda1 /mnt
# mkdir /mnt/1
# cd /mnt/1
# btrfs subvolume snapshot /mnt snap0
# ls -a /mnt/1/snap0/1
. .. [no other file/dir]
# ll /mnt/1/snap0/
total 0
drwxr-xr-x 1 root root 10 Ju1 24 12:11 1
^^^
There is no file/dir in it, but it's size is 10
# cd /mnt/1/snap0/1/snap0
[Enter a unexisted directory successfully...]
There is nothing in the directory 1 in snap0, but btrfs told the length of
this directory is 10. Beside that, we can enter an unexisted directory, it is
very strange to the users.
# btrfs subvolume snapshot /mnt/1/snap0 /mnt/snap1
# ll /mnt/1/snap0/1/
total 0
[None]
# ll /mnt/snap1/1/
total 0
drwxr-xr-x 1 root root 0 Ju1 24 12:14 snap0
And the source of snap1 did have any directory in Directory 1, but snap1 have
a snap0, it is different between the source and the snapshot.
So I think we should insert directory item and directory name index and update
the parent inode as the last step of snapshot creation, and do not leave the
useless metadata in the file tree.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Sometimes we need choose the method of the reservation according to the type
of the block reservation, such as the reservation for the delayed inode update.
Now we identify the type just by comparing the address of the reservation
variants, it is very ugly if it is a temporary one because we need compare it
with all the common reservation variants. So we add a new "type" field to keep
the type the reservation variants.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The ordered extent allocation is in the fast path of the IO, so use a slab
to improve the speed of the allocation.
"Size of the struct is 280, so this will fall into the size-512 bucket,
giving 8 objects per page, while own slab will pack 14 objects into a page.
Another benefit I see is to check for leaked objects when the module is
removed (and the cache destroy takes place)."
-- David Sterba
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
If a snapshot is created while we are writing some data into the file,
the i_size of the corresponding file in the snapshot will be wrong, it will
be beyond the end of the last file extent. And btrfsck will report:
root 256 inode 257 errors 100
Steps to reproduce:
# mkfs.btrfs <partition>
# mount <partition> <mnt>
# cd <mnt>
# dd if=/dev/zero of=tmpfile bs=4M count=1024 &
# for ((i=0; i<4; i++))
> do
> btrfs sub snap . $i
> done
This because the algorithm of disk_i_size update is wrong. Though there are
some ordered extents behind the current one which we use to update disk_i_size,
it doesn't mean those extents will be dealt with in the same transaction. So
We shouldn't use the offset of those extents to update disk_i_size. Or we will
get the wrong i_size in the snapshot.
We fix this problem by recording the max real i_size. If we find there is a
ordered extent which is in front of the current one and doesn't complete, we
will record the end of the current one into that ordered extent. Surely, if
the current extent holds the end of other extent(it must be greater than
the current one because it is behind the current one), we will record the
number that the current extent holds. In this way, we can exclude the ordered
extents that may not be dealth with in the same transaction, and be easy to
know the real disk_i_size.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
If we create several snapshots at the same time, the following BUG_ON() will be
triggered.
kernel BUG at fs/btrfs/extent-tree.c:6047!
Steps to reproduce:
# mkfs.btrfs <partition>
# mount <partition> <mnt>
# cd <mnt>
# for ((i=0;i<2400;i++)); do touch long_name_to_make_tree_more_deep$i; done
# for ((i=0; i<4; i++))
> do
> mkdir $i
> for ((j=0; j<200; j++))
> do
> btrfs sub snap . $i/$j
> done &
> done
The reason is:
Before transaction commit, some operations changed the fs tree and new tree
blocks were allocated because of COW. We used the implicit non-shared back
reference for those newly allocated tree blocks because they were not shared by
two or more trees.
And then we created the first snapshot for the fs tree, according to the back
reference rules, we also used implicit back refs for the child tree blocks of
the root node of the fs tree, now those child nodes/leaves were shared by two
trees.
Then We didn't deal with the delayed references, and continued to change the fs
tree(created the second snapshot and inserted the dir item of the new snapshot
into the fs tree). According to the rules of the back reference, we added full
back refs for those tree blocks whose parents have be shared by two trees.
Now some newly allocated tree blocks had two types of the references.
As we know, the delayed reference system handles these delayed references from
back to front, and the full delayed reference is inserted after the implicit
ones. So when we dealt with the back references of those newly allocated tree
blocks, the full references was dealt with at first. And if the first reference
is a shared back reference and the tree block that the reference points to is
newly allocated, It would be considered as a tree block which is shared by two
or more trees when it is allocated and should be a full back reference not a
implicit one, the flag of its reference also should be set to FULL_BACKREF.
But in fact, it was a non-shared tree block with a implicit reference at
beginning, so it was not compulsory to set the flags to FULL_BACKREF. So BUG_ON
was triggered.
We have several methods to fix this bug:
1. deal with delayed references after the snapshot is created and before we
change the source tree of the snapshot. This is the easiest and safest way.
2. modify the sort method of the delayed reference tree, make the full delayed
references be inserted before the implicit ones. It is also very easy, but
I don't know if it will introduce some problems or not.
3. modify select_delayed_ref() and make it select the implicit delayed reference
at first. This way is not so good because it may wastes CPU time if we have
lots of delayed references.
4. set the flags to FULL_BACKREF, this method is a little complex comparing with
the 1st way.
I chose the 1st way to fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This patch fixes the following problem:
- If we failed to deal with the delayed dir items, we should abort transaction,
just as its comment said. Fix it.
- If root reference or root back reference insertion failed, we should
abort transaction. Fix it.
- Fix the double free problem of pending->inherit.
- Do not restore the trans->rsv if we doesn't change it.
- make the error path more clearly.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
bbio has been malloced in btrfs_map_block() and should be
freed before leaving from the error handling cases.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
I noticed this when I was doing the fsync stuff, we allocate split extents if we
drop an extent range that is in the middle of an existing extent. This BUG()'s
if we fail to allocate memory, but the fact is this is just a cache, we will
just regenerate the cache if we need it, the important part is that we free the
range we are given. This can be done without allocations, so if we fail to
allocate splits just skip the splitting stage and free our em and look for more
extents to drop. This also makes btrfs_drop_extent_cache a void since nobody
was checking the return value anyway. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The freeze rwsem is taken by sb_start_intwrite() and dropped during the
commit_ or end_transaction(). In the async case, that happens in a worker
thread. Tell lockdep the calling thread is releasing ownership of the
rwsem and the async thread is picking it up.
XFS plays the same trick in fs/xfs/xfs_aops.c.
Signed-off-by: Sage Weil <sage@inktank.com>
I audited all users of btrfs_drop_extents and found that nobody actually uses
the hint_byte argument. I'm sure it was used for something at some point but
it's not used now, and the way the pinning works the disk bytenr would never be
immediately useful anyway so lets just remove it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This is based on Josef's "Btrfs: turbo charge fsync".
If an inode is a BTRFS_INODE_NODATASUM one, we don't need to look for csum
items any more.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
This is based on Josef's "Btrfs: turbo charge fsync".
The current btrfs checks if an inode is in log by comparing
root's last_log_commit to inode's last_sub_trans[2].
But the problem is that this root->last_log_commit is shared among
inodes.
Say we have N inodes to be logged, after the first inode,
root's last_log_commit is updated and the N-1 remained files will
be skipped.
This fixes the bug by keeping a local copy of root's last_log_commit
inside each inode and this local copy will be maintained itself.
[1]: we regard each log transaction as a subset of btrfs's transaction,
i.e. sub_trans
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
This is based on Josef's "Btrfs: turbo charge fsync".
The above Josef's patch performs very good in random sync write test,
because we won't have too much extents to merge.
However, it does not performs good on the test:
dd if=/dev/zero of=foobar bs=4k count=12500 oflag=sync
The reason is when we do sequencial sync write, we need to merge the
current extent just with the previous one, so that we can get accumulated
extents to log:
A(4k) --> AA(8k) --> AAA(12k) --> AAAA(16k) ...
So we'll have to flush more and more checksum into log tree, which is the
bottleneck according to my tests.
But we can avoid this by telling fsync the real extents that are needed
to be logged.
With this, I did the above dd sync write test (size=50m),
w/o (orig) w/ (josef's) w/ (this)
SATA 104KB/s 109KB/s 121KB/s
ramdisk 1.5MB/s 1.5MB/s 10.7MB/s (613%)
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
We will stop and restart a transaction every time we move to a different leaf
when truncating a file. This is for enospc reasons, but really we could
probably get away with doing this a little better by actually working until we
hit an ENOSPC. So add a ->failfast flag to the block_rsv and set it when we do
truncates which will fail as soon as the block rsv runs out of space, and then
at that point we can stop and restart the transaction and refill the block rsv
and carry on. This will make rm'ing of a file with lots of extents a bit
faster. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This is based on Josef's "Btrfs: turbo charge fsync".
We should cleanup those extents after we've finished logging inode,
otherwise we may do redundant work on them.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
I hit this a couple times while working on my fsync patch (all my bugs, not
normal operation), but with my new stuff we could have new errors from cases
I have not encountered, so instead of BUG()'ing we should be WARN()'ing so
that we are notified there is a problem but the user doesn't lose their
data. We can easily commit the transaction in the case that the tree
logging fails and still be fine, so let's try and be as nice to the user as
possible. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
At least for the vm workload. Currently on fsync we will
1) Truncate all items in the log tree for the given inode if they exist
and
2) Copy all items for a given inode into the log
The problem with this is that for things like VMs you can have lots of
extents from the fragmented writing behavior, and worst yet you may have
only modified a few extents, not the entire thing. This patch fixes this
problem by tracking which transid modified our extent, and then when we do
the tree logging we find all of the extents we've modified in our current
transaction, sort them and commit them. We also only truncate up to the
xattrs of the inode and copy that stuff in normally, and then just drop any
extents in the range we have that exist in the log already. Here are some
numbers of a 50 meg fio job that does random writes and fsync()s after every
write
Original Patched
SATA drive 82KB/s 140KB/s
Fusion drive 431KB/s 2532KB/s
So around 2-6 times faster depending on your hardware. There are a few
corner cases, for example if you truncate at all we have to do it the old
way since there is no way to be sure what is in the log is ok. This
probably could be done smarter, but if you write-fsync-truncate-write-fsync
you deserve what you get. All this work is in RAM of course so if your
inode gets evicted from cache and you read it in and fsync it we'll do it
the slow way if we are still in the same transaction that we last modified
the inode in.
The biggest cool part of this is that it requires no changes to the recovery
code, so if you fsync with this patch and crash and load an old kernel, it
will run the recovery and be a-ok. I have tested this pretty thoroughly
with an fsync tester and everything comes back fine, as well as xfstests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
While working on my fsync patch my fsync tester kept hitting mismatching
md5sums when I would randomly write to a prealloc'ed region, syncfs() and
then write to the prealloced region some more and then fsync() and then
immediately reboot. This is because the tree logging code will skip writing
csums for file extents who's generation is less than the current running
transaction. When we mark extents as written we haven't been updating their
generation so they were always being skipped. This wouldn't happen if you
were to preallocate and then write in the same transaction, but if you for
example prealloced a VM you could definitely run into this problem. This
patch makes my fsync tester happy again. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Swinging this pendulum back the other way. We've been allocating chunks up
to 2% of the disk no matter how much we actually have allocated. So instead
fix this calculation to only allocate chunks if we have more than 80% of the
space available allocated. Please test this as it will likely cause all
sorts of ENOSPC problems to pop up suddenly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There is a completely impossible situation to hit where you can preallocate
a file, fsync it, write into the preallocated region, have the transaction
commit twice and then fsync and then immediately lose power and lose all of
the contents of the write. This patch fixes this just so I feel better
about the situation and because it is lightweight, we just update the
last_trans when we finish an ordered IO and we don't update the inode
itself. This way we are completely safe and I feel better. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The btrfs send code was assuming the offset of the file item into the
extent translated to bytes on disk. If we're compressed, this isn't
true, and so it was off into extents owned by other files.
It was also improperly handling inline extents. This solves a crash
where we may have gone past the end of the file extent item by not
testing early enough for an inline extent. It also solves problems
where we have a whole between the end of the inline item and the start
of the full extent.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We can't do the deleted/reused logic for top/root inodes as it would
create a stream that tries to delete and recreate the root dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We have to ignore inode/space cache objects in send/receive.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We need to pass the root that we determined earlier to iterate_inode_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
The previous check was working fine, but this check should be
easier to read. Also, we could theoritically have some exotic
bugs with the previous checks.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
A leftover from older code and unused now.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Updating send_progress in process_recorded_refs was not correct.
It got updated too early in the cur_inode_new_gen case.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Btrfs send/receive uses the aux field to store inode numbers. On
32 bit machines this may become a problem.
Also fix all users of ulist_add and ulist_add_merged.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We can't easily use the index of the radix tree for inums as the
radix tree uses 32bit indexes on 32bit kernels. For 32bit kernels,
we now use the lower 32bit of the inum as index and an additional
list to store multiple entries per radix tree entry.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
When everything is done, name_cache_free is called which however
forgot to call kfree on the cache entries.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
If we break, we may miss the clone from send_root which we prefer
over all other clones.
Commit is a result of Arne's review.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Don't have a seperate return path for the mentioned case. Now
we do the same "take lowest inode/offset" logic for all found clones.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Make sure to never get in trouble due to the backref_ctx
which was on the stack before.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We only added the parent for the new position of a moved dir.
We also need to add the old parent of the moved dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
fs_path_remove is not used at the moment due to a previous patch.
Remove it for now (with #if 0) to avoid compile warnings.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
We missed that check which resultet in all refs with the same name
being reported as first_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
When the current inodes inum is smaller then the inum of the
parent directory strange things were happending due to wrong
path resolution and other bugs. Fix this with a new approach
for the problem.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The action field has been merged into struct btrfs_delayed_ref_node,
and no struct btrfs_delayed_ref is available now.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Pass the user namespace the uid and gid values in the xattr are stored
in into posix_acl_from_xattr.
- Pass the user namespace kuid and kgid values should be converted into
when storing uid and gid values in an xattr in posix_acl_to_xattr.
- Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to
pass in &init_user_ns.
In the short term this change is not strictly needed but it makes the
code clearer. In the longer term this change is necessary to be able to
mount filesystems outside of the initial user namespace that natively
store posix acls in the linux xattr format.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull a btrfs revert from Chris Mason:
"My for-linus branch has one revert in the new quota code.
We're building up more fixes at etc for the next merge window, but I'm
keeping them out unless they are bigger regressions or have a huge
impact."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"
This reverts commit 5986802c2f.
Both paths are not error paths but regular cases where non-qgroup
subvols are involved.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fixes from Chris Mason:
"I've split out the big send/receive update from my last pull request
and now have just the fixes in my for-linus branch. The send/recv
branch will wander over to linux-next shortly though.
The largest patches in this pull are Josef's patches to fix DIO
locking problems and his patch to fix a crash during balance. They
are both well tested.
The rest are smaller fixes that we've had queued. The last rc came
out while I was hacking new and exciting ways to recover from a
misplaced rm -rf on my dev box, so these missed rc3."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: fix that repair code is spuriously executed for transid failures
Btrfs: fix ordered extent leak when failing to start a transaction
Btrfs: fix a dio write regression
Btrfs: fix deadlock with freeze and sync V2
Btrfs: revert checksum error statistic which can cause a BUG()
Btrfs: remove superblock writing after fatal error
Btrfs: allow delayed refs to be merged
Btrfs: fix enospc problems when deleting a subvol
Btrfs: fix wrong mtime and ctime when creating snapshots
Btrfs: fix race in run_clustered_refs
Btrfs: don't run __tree_mod_log_free_eb on leaves
Btrfs: increase the size of the free space cache
Btrfs: barrier before waitqueue_active
Btrfs: fix deadlock in wait_for_more_refs
btrfs: fix second lock in btrfs_delete_delayed_items()
Btrfs: don't allocate a seperate csums array for direct reads
Btrfs: do not strdup non existent strings
Btrfs: do not use missing devices when showing devname
Btrfs: fix that error value is changed by mistake
Btrfs: lock extents as we map them in DIO
...
If verify_parent_transid() fails for all mirrors, the current code
calls repair_io_failure() anyway which means:
- that the disk block is rewritten without repairing anything and
- that a kernel log message is printed which misleadingly claims
that a read error was corrected.
This is an example:
parent transid verify failed on 615015833600 wanted 110423 found 110424
parent transid verify failed on 615015833600 wanted 110423 found 110424
btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...)
It is wrong to ignore the results from verify_parent_transid() and to
call repair_eb_io_failure() when the verification of the transids failed.
This commit fixes the issue.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We cannot just return error before freeing ordered extent and releasing reserved
space when we fail to start a transacion.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9
(Btrfs: lock extents as we map them in DIO).
In dio write, we should unlock the section which we didn't do IO on in case that
we fall back to buffered write. But we need to not only unlock the section
but also cleanup reserved space for the section.
This bug was found while running xfstests 133, with this 133 no longer complains.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We can deadlock with freeze right now because we unconditionally start a
transaction in our ->sync_fs() call. To fix this just check and see if we
have a running transaction to commit. This saves us from the deadlock
because at this point we'll have the umount sem for the sb so we're safe
from freezes coming in after we've done our check. With this patch the
freeze xfstests no longer deadlocks. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Commit 442a4f6308 added btrfs device
statistic counters for detected IO and checksum errors to Linux 3.5.
The statistic part that counts checksum errors in
end_bio_extent_readpage() can cause a BUG() in a subfunction:
"kernel BUG at fs/btrfs/volumes.c:3762!"
That part is reverted with the current patch.
However, the counting of checksum errors in the scrub context remains
active, and the counting of detected IO errors (read, write or flush
errors) in all contexts remains active.
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With commit acce952b0, btrfs was changed to flag the filesystem with
BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal
error happened like a write I/O errors of all mirrors.
In such situations, on unmount, the superblock is written in
btrfs_error_commit_super(). This is done with the intention to be able
to evaluate the error flag on the next mount. A warning is printed
in this case during the next mount and the log tree is ignored.
The issue is that it is possible that the superblock points to a root
that was not written (due to write I/O errors).
The result is that the filesystem cannot be mounted. btrfsck also does
not start and all the other btrfs-progs tools fail to start as well.
However, mount -o recovery is working well and does the right things
to recover the filesystem (i.e., don't use the log root, clear the
free space cache and use the next mountable root that is stored in the
root backup array).
This patch removes the writing of the superblock when
BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error
flag in the mount function.
These lines can be used to reproduce the issue (using /dev/sdm):
SCRATCH_DEV=/dev/sdm
SCRATCH_MNT=/mnt
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo
ls -alLF /dev/mapper/foo
mkfs.btrfs /dev/mapper/foo
mount /dev/mapper/foo $SCRATCH_MNT
echo bar > $SCRATCH_MNT/foo
sync
echo 0 25165824 error | dmsetup reload foo
dmsetup resume foo
ls -alF $SCRATCH_MNT
touch $SCRATCH_MNT/1
ls -alF $SCRATCH_MNT
sleep 35
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo
dmsetup resume foo
sleep 1
umount $SCRATCH_MNT
btrfsck /dev/mapper/foo
dmsetup remove foo
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Daniel Blueman reported a bug with fio+balance on a ramdisk setup.
Basically what happens is the balance relocates a tree block which will drop
the implicit refs for all of its children and adds a full backref. Once the
block is relocated we have to add the implicit refs back, so when we cow the
block again we add the implicit refs for its children back. The problem
comes when the original drop ref doesn't get run before we add the implicit
refs back. The delayed ref stuff will specifically prefer ADD operations
over DROP to keep us from freeing up an extent that will have references to
it, so we try to add the implicit ref before it is actually removed and we
panic. This worked fine before because the add would have just canceled the
drop out and we would have been fine. But the backref walking work needs to
be able to freeze the delayed ref stuff in time so we have this ever
increasing sequence number that gets attached to all new delayed ref updates
which makes us not merge refs and we run into this issue.
So to fix this we need to merge delayed refs. So everytime we run a
clustered ref we need to try and merge all of its delayed refs. The backref
walking stuff locks the delayed ref head before processing, so if we have it
locked we are safe to merge any refs inside of the sequence number. If
there is no sequence number we can merge all refs. Doing this not only
fixes our bug but keeps the delayed ref code from adding and removing
useless refs and batching together multiple refs into one search instead of
one search per delayed ref, which will really help our commit times. I ran
this with Daniels test and 276 and I haven't seen any problems. Thanks,
Reported-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Subvol delete is a special kind of awful where we use the global reserve to
cover the ENOSPC requirements. The problem is once we're done removing
everything we do a btrfs_update_inode(), which by default will try to do the
delayed update stuff which will use it's own reserve. There will be no
space in this reserve and we'll return ENOSPC. So instead use
btrfs_update_inode_fallback() which will just fallback to updating the inode
item in the case of enospc. This is fine because the global reserve covers
the space requirements for this. With this patch I can now delete a subvol
on a problem image Dave Sterba sent me. Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we created a new snapshot, the mtime and ctime of its parent directory
were not updated. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
With commit
commit d1270cd91f
Author: Arne Jansen <sensille@gmx.net>
Date: Tue Sep 13 15:16:43 2011 +0200
Btrfs: put back delayed refs that are too new
I added a window where the delayed_ref's head->ref_mod code can diverge
from the sum of the remaining refs, because we release the head->mutex
in the middle. This leads to btrfs_lookup_extent_info returning wrong
numbers. This patch fixes this by adjusting the head's ref_mod with each
delayed ref we run.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we split a leaf, we may end up inserting a new root on top of that
leaf. The reflog code was incorrectly assuming the old root was always
a node. This makes sure we skip over leaves.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Arne was complaining about the space cache having mismatching generation
numbers when debugging a deadlock. This is because we can run out of space
in our preallocated range for our space cache if you have a pretty
fragmented amount of space in your pinned space. So just increase the
amount of space we preallocate for space cache so we can be sure to have
enough space. This will only really affect data ranges since their the only
chunks that end up larger than 256MB. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We need a barrir before calling waitqueue_active otherwise we will miss
wakeups. So in places that do atomic_dec(); then atomic_read() use
atomic_dec_return() which imply a memory barrier (see memory-barriers.txt)
and then add an explicit memory barrier everywhere else that need them.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Commit a168650c introduced a waiting mechanism to prevent busy waiting in
btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations,
where a tree_mod_seq is held while waiting for the io to complete, while
the end_io calls btrfs_run_delayed_refs.
This whole mechanism is unnecessary. If not enough runnable refs are
available to satisfy count, just return as count is more like a guideline
than a strict requirement.
In case we have to run all refs, commit transaction makes sure that no
other threads are working in the transaction anymore, so we just assert
here that no refs are blocked.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We've been allocating a big array for csums instead of storing them in the
io_tree like we do for buffered reads because previously we were locking the
entire range, so we didn't have an extent state for each sector of the
range. But now that we do the range locking as we map the buffers we can
limit the mapping lenght to sectorsize and use the private part of the
io_tree for our csums. This allows us to avoid an extra memory allocation
for direct reads which could incur latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When we close devices we add back empty devices for some reason that escapes
me. In the case of a missing dev we don't allocate an rcu_string for it's
name, so check to see if the device has a name and if it doesn't don't
bother strdup()'ing it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If you do the following
mkfs.btrfs /dev/sdb /dev/sdc
rmmod btrfs
dd if=/dev/zero of=/dev/sdb bs=1M count=1
mount -o degraded /dev/sdc /mnt/btrfs-test
the box will panic trying to deref the name for the missing dev since it is
the lower numbered devid. So fix show_devname to not use missing devices.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
In iterate_inodes_from_logical() the error result from
extent_from_logical() is patched by mistake. Typically ENOENT is
patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK)
evaluates to true.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
A deadlock in xfstests 113 was uncovered by commit
d187663ef2
This is because we would not return EIOCBQUEUED for short AIO reads, instead
we'd wait for the DIO to complete and then return the amount of data we
transferred, which would allow our stuff to unlock the remaning amount. But
with this change this no longer happens, so if we have a short AIO read (for
example if we try to read past EOF), we could leave the section from EOF to
the end of where we tried to read locked. Fixing this is tricky since there
is no clear way to know exactly how much data DIO truly submitted for IO, so
to make this less hard on ourselves and less combersome we need to lock the
extents as we try to map them, and then we unlock any areas we didn't
actually map. This makes us completely safe from deadlocks and reliance on
a particular behavior of the DIO code. This also lays the groundwork for
allowing us to use the normal csum storage method for reads which means we
can remove an allocation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
"trans->transid" is cpu endian but we want to store the data as little
endian. "item->ctime.nsec" is only 32 bits, not 64.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Pull btrfs merge fix from Chris Mason:
"This fixes a merge error in rc1. The calls to mnt_want_write should
have been removed."
* 'for-linus-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove mnt_want_write call in btrfs_mksubvol
We got a recursive lock in mksubvol because the caller already held
a lock. I think we got into this due to a merge error. Commit a874a63
removed the mnt_want_write call from btrfs_mksubvol and added a
replacement call to mnt_want_write_file in btrfs_ioctl_snap_create_transid.
Commit e7848683 however tried to move all calls to mnt_want_write above
i_mutex. So somewhere while merging this, it got mixed up. The
solution is to remove the mnt_want_write call completely from
mksubvol.
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The pdflush thread is long gone, so this patch removes references to pdflush
from btrfs comments.
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from btrfs.
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull second vfs pile from Al Viro:
"The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
deadlock reproduced by xfstests 068), symlink and hardlink restriction
patches, plus assorted cleanups and fixes.
Note that another fsfreeze deadlock (emergency thaw one) is *not*
dealt with - the series by Fernando conflicts a lot with Jan's, breaks
userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
for massive vfsmount leak; this is going to be handled next cycle.
There probably will be another pull request, but that stuff won't be
in it."
Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
delousing target_core_file a bit
Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
fs: Remove old freezing mechanism
ext2: Implement freezing
btrfs: Convert to new freezing mechanism
nilfs2: Convert to new freezing mechanism
ntfs: Convert to new freezing mechanism
fuse: Convert to new freezing mechanism
gfs2: Convert to new freezing mechanism
ocfs2: Convert to new freezing mechanism
xfs: Convert to new freezing code
ext4: Convert to new freezing mechanism
fs: Protect write paths by sb_start_write - sb_end_write
fs: Skip atime update on frozen filesystem
fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
fs: Improve filesystem freezing handling
switch the protection of percpu_counter list to spinlock
nfsd: Push mnt_want_write() outside of i_mutex
btrfs: Push mnt_want_write() outside of i_mutex
fat: Push mnt_want_write() outside of i_mutex
...
We convert btrfs_file_aio_write() to use new freeze check. We also add proper
freeze protection to btrfs_page_mkwrite(). We also add freeze protection to
the transaction mechanism to avoid starting transactions on frozen filesystem.
At minimum this is necessary to stop iput() of unlinked file to change frozen
filesystem during truncation.
Checks in cleaner_kthread() and transaction_kthread() can be safely removed
since btrfs_freeze() will lock the mutexes and thus block the threads (and they
shouldn't have anything to do anyway).
CC: linux-btrfs@vger.kernel.org
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use the generic printk_get_level() to search a message for a kern_level.
Add __printf to verify format and arguments. Fix a few messages that
had mismatches in format and arguments. Add #ifdef CONFIG_PRINTK blocks
to shrink the object size a bit when not using printk.
[akpm@linux-foundation.org: whitespace tweak]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When mnt_want_write() starts to handle freezing it will get a full lock
semantics requiring proper lock ordering. So push mnt_want_write() call
consistently outside of i_mutex.
CC: Chris Mason <chris.mason@oracle.com>
CC: linux-btrfs@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On powerpc, we don't get the implicit vmalloc.h include, and as a result
the build fails noisily:
fs/btrfs/send.c: In function 'fs_path_free':
fs/btrfs/send.c:185:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
fs/btrfs/send.c: In function 'fs_path_ensure_buf':
fs/btrfs/send.c:215:4: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration]
fs/btrfs/send.c:215:12: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:225:12: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:233:13: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c: In function 'iterate_dir_item':
fs/btrfs/send.c:900:10: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:909:11: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c: In function 'btrfs_ioctl_send':
fs/btrfs/send.c:4463:17: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:4469:17: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:4475:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration]
fs/btrfs/send.c:4475:20: warning: assignment makes pointer from integer without a cast [enabled by default]
fs/btrfs/send.c:4483:21: warning: assignment makes pointer from integer without a cast [enabled by default]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull large btrfs update from Chris Mason:
"This pull request is very large, and the two main features in here
have been under testing/devel for quite a while.
We have subvolume quotas from the strato developers. This enables
full tracking of how many blocks are allocated to each subvolume (and
all snapshots) and you can set limits on a per-subvolume basis. You
can also create quota groups and toss multiple subvolumes into a big
group. It's everything you need to be a web hosting company and give
each user their own subvolume.
The userland side of the quotas is being refreshed, they'll send out
details on where to grab it soon.
Next is the kernel side of btrfs send/receive from Alexander Block.
This leverages the same infrastructure as the quota code to figure out
relationships between blocks and their owners. It can then compute
the difference between two snapshots and sends the diffs in a neutral
format into userland.
The basic model:
create a snapshot
send that snapshot as the initial backup
make changes
create a second snapshot
send the incremental as a backup
delete the first snapshot
(use the second snapshot for the next incremental)
The receive portion is all in userland, and in the 'next' branch of my
btrfs-progs repo.
There's still some work to do in terms of optimizing the send side
from kernel to userland. The really important part is figuring out
how two snapshots are different, and this is where we are
concentrating right now. The initial send of a dataset is a little
slower than tar, but the incremental sends are dramatically faster
than what rsync can do.
On top of all of that, we have a nice queue of fixes, cleanups and
optimizations."
Fix up trivial modify/del conflict in fs/btrfs/ioctl.c
Also fix up semantic conflict in fs/btrfs/send.c: the interface to
dentry_open() changed in commit 765927b2d5 ("switch dentry_open() to
struct path, make it grab references itself"), and since it now grabs
whatever references it needs, we should no longer do the mntget() on the
mnt (and we need to dput() the dentry reference we took).
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (65 commits)
Btrfs: uninit variable fixes in send/receive
Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive
Btrfs: add btrfs_compare_trees function
Btrfs: introduce subvol uuids and times
Btrfs: make iref_to_path non static
Btrfs: add a barrier before a waitqueue_active check
Btrfs: call the ordered free operation without any locks held
Btrfs: Check INCOMPAT flags on remount and add helper function
Btrfs: add helper for tree enumeration
btrfs: allow cross-subvolume file clone
Btrfs: improve multi-thread buffer read
Btrfs: make btrfs's allocation smoothly with preallocation
Btrfs: lock the transition from dirty to writeback for an eb
Btrfs: fix potential race in extent buffer freeing
Btrfs: don't return true in releasepage unless we actually freed the eb
Btrfs: suppress printk() if all device I/O stats are zero
Btrfs: remove unwanted printk() for btrfs device I/O stats
Btrfs: rewrite BTRFS_SETGET_FUNCS
Btrfs: zero unused bytes in inode item
Btrfs: kill free_space pointer from inode structure
...
Conflicts:
fs/btrfs/ioctl.c
This is the kernel portion of btrfs send/receive
Conflicts:
fs/btrfs/Makefile
fs/btrfs/backref.h
fs/btrfs/ctree.c
fs/btrfs/ioctl.c
fs/btrfs/ioctl.h
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch introduces the BTRFS_IOC_SEND ioctl that is
required for send. It allows btrfs-progs to implement
full and incremental sends. Patches for btrfs-progs will
follow.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
This function is used to find the differences between
two trees. The tree compare skips whole subtrees if it
detects shared tree blocks and thus is pretty fast.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
This patch introduces uuids for subvolumes. Each
subvolume has it's own uuid. In case it was snapshotted,
it also contains parent_uuid. In case it was received,
it also contains received_uuid.
It also introduces subvolume ctime/otime/stime/rtime. The
first two are comparable to the times found in inodes. otime
is the origin/creation time and ctime is the change time.
stime/rtime are only valid on received subvolumes.
stime is the time of the subvolume when it was
sent. rtime is the time of the subvolume when it was
received.
Additionally to the times, we have a transid for each
time. They are updated at the same place as the times.
btrfs receive uses stransid and rtransid to find out
if a received subvolume changed in the meantime.
If an older kernel mounts a filesystem with the
extented fields, all fields become invalid. The next
mount with a new kernel will detect this and reset the
fields.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Each ordered operation has a free callback, and this was called with the
worker spinlock held. Josef made the free callback also call iput,
which we can't do with the spinlock.
This drops the spinlock for the free operation and grabs it again before
moving through the rest of the list. We'll circle back around to this
and find a cleaner way that doesn't bounce the lock around so much.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
cc: stable@kernel.org
In support of the recently added capability to remount with lzo
compression, provide a helper function to check the compression
INCOMPAT flags when remounting with lzo compression, and set
the flags if necessary.
Also, implement the new helper function when defragmenting with
explicit lzo compression and when setting the default subvolume.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Often no exact match is wanted but just the next lower or
higher item. There's a lot of duplicated code throughout
btrfs to deal with the corner cases. This patch adds a
helper function that can facilitate searching.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Lift the EXDEV condition and allow different root trees for files being
cloned, then pass source inode's root when searching for extents.
Cloning is not allowed to cross vfsmounts, ie. when two subvolumes from
one filesystem are mounted separately.
Signed-off-by: David Sterba <dsterba@suse.cz>
Pull trivial tree from Jiri Kosina:
"Trivial updates all over the place as usual."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
Fix typo in include/linux/clk.h .
pci: hotplug: Fix typo in pci
iommu: Fix typo in iommu
video: Fix typo in drivers/video
Documentation: Add newline at end-of-file to files lacking one
arm,unicore32: Remove obsolete "select MISC_DEVICES"
module.c: spelling s/postition/position/g
cpufreq: Fix typo in cpufreq driver
trivial: typo in comment in mksysmap
mach-omap2: Fix typo in debug message and comment
scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
Change email address for Steve Glendinning
Btrfs: fix typo in convert_extent_bit
via: Remove bogus if check
netprio_cgroup.c: fix comment typo
backlight: fix memory leak on obscure error path
Documentation: asus-laptop.txt references an obsolete Kconfig item
Documentation: ManagementStyle: fixed typo
mm/vmscan: cleanup comment error in balance_pgdat
mm: cleanup on the comments of zone_reclaim_stat
...
While testing with my buffer read fio jobs[1], I find that btrfs does not
perform well enough.
Here is a scenario in fio jobs:
We have 4 threads, "t1 t2 t3 t4", starting to buffer read a same file,
and all of them will race on add_to_page_cache_lru(), and if one thread
successfully puts its page into the page cache, it takes the responsibility
to read the page's data.
And what's more, reading a page needs a period of time to finish, in which
other threads can slide in and process rest pages:
t1 t2 t3 t4
add Page1
read Page1 add Page2
| read Page2 add Page3
| | read Page3 add Page4
| | | read Page4
-----|------------|-----------|-----------|--------
v v v v
bio bio bio bio
Now we have four bios, each of which holds only one page since we need to
maintain consecutive pages in bio. Thus, we can end up with far more bios
than we need.
Here we're going to
a) delay the real read-page section and
b) try to put more pages into page cache.
With that said, we can make each bio hold more pages and reduce the number
of bios we need.
Here is some numbers taken from fio results:
w/o patch w patch
------------- -------- ---------------
READ: 745MB/s +25% 934MB/s
[1]:
[global]
group_reporting
thread
numjobs=4
bs=32k
rw=read
ioengine=sync
directory=/mnt/btrfs/
[READ]
filename=foobar
size=2000M
invalidate=1
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
For backref walking, we've introduce delayed ref's sequence. However,
it changes our preallocation behavior.
The story is that when we preallocate an extent and then mark it written
piece by piece, the ideal case should be that we don't need to COW the
extent, which is why we use 'preallocate'.
But we may not make use of preallocation, since when we check for cross refs on
the extent, we may have two ref entries which have the same content except
the sequence value, and we recognize them as cross refs and do COW to allocate
another extent.
So we end up with several pieces of space instead of an whole extent.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There is a small window where an eb can have no IO bits set on it, which
could potentially result in extent_buffer_under_io() returning false when we
want it to return true, which could result in not fun things happening. So
in order to protect this case we need to hold the refs_lock when we make
this transition to make sure we get reliable results out of
extent_buffer_udner_io(). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This sounds sort of impossible but it is the only thing I can think of and
at the very least it is theoretically possible so here it goes.
If we are in try_release_extent_buffer we will check that the ref count on
the extent buffer is 1 and not under IO, and then go down and clear the tree
ref. If between this check and clearing the tree ref somebody else comes in
and grabs a ref on the eb and the marks it dirty before
try_release_extent_buffer() does it's tree ref clear we can end up with a
dirty eb that will be freed while it is still dirty which will result in a
panic. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I noticed while looking at an extent_buffer race that we will
unconditionally return 1 if we get down to release_extent_buffer after
clearing the tree ref. However we can easily race in here and get a ref on
the eb and not actually free the eb. So make release_extent_buffer return 1
if it free'd the eb and 0 if not so we can be a little kinder to the vm.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Code is added to suppress the I/O stats printing at mount time if all
statistic values are zero.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
People complained about the annoying kernel log message
"btrfs: no dev_stats entry found ... (OK on first mount after mkfs)"
everytime a filesystem is mounted for the first time after running
mkfs. Since the distribution of the btrfs-progs is not synchronized
to the kernel version, mkfs like it is now will be used also in the
future. Then this message is not useful to find errors, it is just
annoying. This commit removes the printk().
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
BTRFS_SETGET_FUNCS macro is used to generate btrfs_set_foo() and
btrfs_foo() functions, which read and write specific fields in the
extent buffer.
The total number of set/get functions is ~200, but in fact we only
need 8 functions: 2 for u8 field, 2 for u16, 2 for u32 and 2 for u64.
It results in redunction of ~37K bytes.
text data bss dec hex filename
629661 12489 216 642366 9cd3e fs/btrfs/btrfs.o.orig
592637 12489 216 605342 93c9e fs/btrfs/btrfs.o
Signed-off-by: Li Zefan <lizefan@huawei.com>
The otime field is not zeroed, so users will see random otime in an old
filesystem with a new kernel which has otime support in the future.
The reserved bytes are also not zeroed, and we'll have compatibility
issue if we make use of those bytes.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Inodes always allocate free space with BTRFS_BLOCK_GROUP_DATA type,
which means every inode has the same BTRFS_I(inode)->free_space pointer.
This shrinks struct btrfs_inode by 4 bytes (or 8 bytes on 64 bits).
Signed-off-by: Li Zefan <lizefan@huawei.com>
When calling btrfs_next_old_leaf, we were leaking an extent buffer in the
rare case of using the deadlock avoidance code needed for the tree mod log.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If a block group is ro, do not count its entries in when we dump space info.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Block group has ro attributes, make dump_space_info show it.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Here is the whole story:
1)
A free space cache consists of two parts:
o free space cache inode, which is special becase it's stored in root tree.
o free space info, which is stored as the above inode's file data.
But we only build up another new inode and does not flush its free space info
onto disk when we _clear and setup_ free space cache, and this ends up with
that the block group cache's cache_state remains DC_SETUP instead of DC_WRITTEN.
And holding DC_SETUP means that we will not truncate this free space cache inode,
which means the disk offset of its file extent will remain _unchanged_ at least
until next transaction finishes committing itself.
2)
We can set a block group readonly when we relocate the block group.
However,
if the readonly block group covers the disk offset where our free space cache
inode is going to write, it will force the free space cache inode into
cow_file_range() and it'll end up hitting a BUG_ON.
3)
Due to the above analysis, we fix this bug by adding the missing dirty flag.
4)
However, it's not over, there is still another case, nospace_cache.
With nospace_cache, we do not want to set dirty flag, instead we just truncate
free space cache inode and bail out with setting cache state DC_WRITTEN.
We can benifit from it since it saves us another 'pre-allocation' part which
usually costs a lot.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Chris Mason