If 'pt_write' is true, we need to emulate the fault. And in later patch, we
need to emulate the fault even though it is not a pt_write event, so rename
it to better fit the meaning
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If dirty bit is not set, we can make the pte access read-only to avoid handing
dirty bit everywhere
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the page fault is caused by mmio, we can cache the mmio info, later, we do
not need to walk guest page table and quickly know it is a mmio fault while we
emulate the mmio instruction
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly check the last mapping, and do not walk to the next level if last spte
is met
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This reverts commit bee931d31e588b8eb86b7edee32fac2d16930cd7.
TLB flush should be done lazily during guest entry, in
kvm_mmu_load().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_set_cr0() and kvm_set_cr4(), and possible other functions,
assume that kvm_mmu_reset_context() flushes the guest TLB. However,
it does not.
Fix by flushing the tlb (and syncing the new root as well).
Signed-off-by: Avi Kivity <avi@redhat.com>
When CR0.WP=0, we sometimes map user pages as kernel pages (to allow
the kernel to write to them). Unfortunately this also allows the kernel
to fetch from these pages, even if CR4.SMEP is set.
Adjust for this by also setting NX on the spte in these circumstances.
Signed-off-by: Avi Kivity <avi@redhat.com>
Cleanup the same operation between kvm_mmu_page_unlink_children and
mmu_pte_write_zap_pte
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Parent pte rmap and page rmap are very similar, so use the same arithmetic
for them
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Abstract the operation of rmap to spte_list, then we can use it for the
reverse mapping of parent pte in the later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Simply return from kvm_mmu_pte_write path if no shadow page is
write-protected, then we can avoid to walk all shadow pages and hold
mmu-lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The condition is opposite, it always maps huge page for the dirty tracked page
Reported-by: Steve <stefan.bosak@gmail.com>
Signed-off-by: Steve <stefan.bosak@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Change each shrinker's API by consolidating the existing parameters into
shrink_control struct. This will simplify any further features added w/o
touching each file of shrinker.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mmu_seq verification can be removed since we get the pfn in the
protection of mmu_lock.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch does:
- call vcpu->arch.mmu.update_pte directly
- use gfn_to_pfn_atomic in update_pte path
The suggestion is from Avi.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Cleanup the code of pte_prefetch_gfn_to_memslot and mapping_level_dirty_bitmap
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using __get_free_page instead of alloc_page and page_address,
using free_page instead of __free_page and virt_to_page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
No need to record the gfn to verifier the pte has the same mode as
current vcpu, it's because we only speculatively update the pte only
if the pte and vcpu have the same mode
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Set spte accessed bit only if guest_initiated == 1 that means the really
accessed
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Code under this lock requires non-preemptibility. Ensure this also over
-rt by converting it to raw spinlock.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead, drop large mappings, which were the reason we dropped shadow.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
For GRU and EPT, we need gup-fast to set referenced bit too (this is why
it's correct to return 0 when shadow_access_mask is zero, it requires
gup-fast to set the referenced bit). qemu-kvm access already sets the
young bit in the pte if it isn't zero-copy, if it's zero copy or a shadow
paging EPT minor fault we relay on gup-fast to signal the page is in
use...
We also need to check the young bits on the secondary pagetables for NPT
and not nested shadow mmu as the data may never get accessed again by the
primary pte.
Without this closer accuracy, we'd have to remove the heuristic that
avoids collapsing hugepages in hugepage virtual regions that have not even
a single subpage in use.
->test_young is full backwards compatible with GRU and other usages that
don't have young bits in pagetables set by the hardware and that should
nuke the secondary mmu mappings when ->clear_flush_young runs just like
EPT does.
Removing the heuristic that checks the young bit in
khugepaged/collapse_huge_page completely isn't so bad either probably but
I thought it was worth it and this makes it reliable.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should work for both hugetlbfs and transparent hugepages.
[akpm@linux-foundation.org: bring forward PageTransCompound() addition for bisectability]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the operation of 'writable' to set_spte() to clean up code
[avi: remove unneeded booleanification]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It only allows to audit one guest in the system since:
- 'audit_point' is a glob variable
- mmu_audit_disable() is called in kvm_mmu_destroy(), so audit is disabled
after a guest exited
this patch fix those issues then allow to audit more guests at the same time
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If a pagetable contains a writeable large spte, all of its sptes will be
write protected, including non-leaf ones, leading to endless pagefaults.
Do not write protect pages above PT_PAGE_TABLE_LEVEL, as the spte fault
paths assume non-leaf sptes are writable.
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In case of a nested page fault or an intercepted #PF newer SVM
implementations provide a copy of the faulting instruction bytes
in the VMCB.
Use these bytes to feed the instruction emulator and avoid the costly
guest instruction fetch in this case.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_instruction had many callers, but only one used all
parameters. One parameter was unused, another one is now
hidden by a wrapper function (required for a future addition
anyway), so most callers use now a shorter parameter list.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Large page information has two elements but one of them, write_count, alone
is accessed by a helper function.
This patch replaces this helper function with more generic one which returns
newly named kvm_lpage_info structure and use it to access the other element
rmap_pde.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Retry #PF for softmmu only when the current vcpu has the same cr3 as the time
when #PF occurs
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Retry #PF is the speculative path, so don't set the accessed bit
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It's the speculative path if 'no_apf = 1' and we will specially handle this
speculative path in the later patch, so 'prefault' is better to fit the sense.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
One more "KVM: MMU: Don't drop accessed bit while updating an spte."
Sptes are accessed by both kvm and hardware.
This patch uses update_spte() to fix the way of removing write access.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently page fault cr2 and nesting infomation are carried outside
the fault data structure. Instead they are placed in the vcpu struct,
which results in confusion as global variables are manipulated instead
of passing parameters.
Fix this issue by adding address and nested fields to struct x86_exception,
so this struct can carry all information associated with a fault.
Signed-off-by: Avi Kivity <avi@redhat.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce a common function to map invalid gpte
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Remove it since we can judge it by using sp->unsync
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rename it to fit its sense better
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We just need flush tlb if overwrite a writable spte with a read-only one.
And we should move this operation to set_spte() for sync_page path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If apf is generated in L2 guest and is completed in L1 guest, it will
prefault this apf in L1 guest's mmu context.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Tracing 'async' and *pfn is useless, since 'async' is always true,
and '*pfn' is always "fault_pfn'
We can trace 'gva' and 'gfn' instead, it can help us to see the
life-cycle of an async_pf
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault
to writable if host pte allows it.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This can happen in the following scenario:
vcpu0 vcpu1
read fault
gup(.write=0)
gup(.write=1)
reuse swap cache, no COW
set writable spte
use writable spte
set read-only spte
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It has no user outside mmu.c and also no prototype.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.
Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.
Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When page is swapped in it is mapped into guest memory only after guest
tries to access it again and generate another fault. To save this fault
we can map it immediately since we know that guest is going to access
the page. Do it only when tdp is enabled for now. Shadow paging case is
more complicated. CR[034] and EFER registers should be switched before
doing mapping and then switched back.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.
Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.
[avi: remove call to get_user_pages_noio(), nacked by Linus; this
makes everything synchrnous again]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We use the physical address instead of the base gfn for the four
PAE page directories we use in unpaged mode. When the guest accesses
an address above 1GB that is backed by a large host page, a BUG_ON()
in kvm_mmu_set_gfn() triggers.
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
drop_spte should not attempt to rmap_remove a non present shadow pte.
This fixes a BUG_ON seen on kvm-autotest.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Originally, SRAR SIGBUS is sent to QEMU-KVM via touching the poisoned
page. But commit 9605456919 prevents the
signal from being sent. So now the signal is sent via
force_sig_info_fault directly.
[marcelo: use send_sig_info instead]
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
After root synced, all unsync sps are synced, this patch add a check to make
sure it's no unsync sps in VCPU's page table
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Set access bit while setup up direct page table if it's nonpaing or npt enabled,
it's good for CPU's speculate access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update
'root_hpa' out of the loop.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit "KVM: MMU: Make tdp_enabled a mmu-context parameter" made real-mode
set ->direct_map, and changed the code that merges in the memory type depend
on direct_map instead of tdp_enabled. However, in this case what really
matters is tdp, not direct_map, since tdp changes the pte format regardless
of whether the mapping is direct or not.
As a result, real-mode shadow mappings got corrupted with ept memory types.
The result was a huge slowdown, likely due to the cache being disabled.
Change it back as the simplest fix for the regression (real fix is to move
all that to vmx code, and not use tdp_enabled as a synonym for ept).
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds code to initialize the Nested Nested Paging
MMU context when the L1 guest executes a VMRUN instruction
and has nested paging enabled in its VMCB.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
With Nested Paging emulation the NX state between the two
MMU contexts may differ. To make sure that always the right
fault error code is recorded this patch moves the NX state
into struct kvm_mmu so that the code can distinguish between
L1 and L2 NX state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently the KVM softmmu implementation can not shadow a 32
bit legacy or PAE page table with a long mode page table.
This is a required feature for nested paging emulation
because the nested page table must alway be in host format.
So this patch implements the missing pieces to allow long
mode page tables for page table types.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch factors out the direct-mapping paths of the
mmu_alloc_roots function into a seperate function. This
makes it a lot easier to avoid all the unnecessary checks
done in the shadow path which may break when running direct.
In fact, this patch already fixes a problem when running PAE
guests on a PAE shadow page table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This function is implemented to load the pdptr pointers of
the currently running guest (l1 or l2 guest). Therefore it
takes care about the current paging mode and can read pdptrs
out of l2 guest physical memory.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces the init_kvm_nested_mmu() function
which is used to re-initialize the nested mmu when the l2
guest changes its paging mode.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the functions to do a nested l2_gva to
l1_gpa page table walk.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces the walk_mmu pointer which points to
the mmu-context currently used for gva_to_gpa translations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a struct with two new fields in
vcpu_arch for x86:
* fault.address
* fault.error_code
This will be used to correctly propagate page faults back
into the guest when we could have either an ordinary page
fault or a nested page fault. In the case of a nested page
fault the fault-address is different from the original
address that should be walked. So we need to keep track
about the real fault-address.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes is_rsvd_bits_set() function prototype to
take only a kvm_mmu context instead of a full vcpu.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some logic of the init_kvm_softmmu function is required to
build the Nested Nested Paging context. So factor the
required logic into a seperate function and export it.
Also make the whole init path suitable for more than one mmu
context.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces an inject_page_fault function pointer
into struct kvm_mmu which will be used to inject a page
fault. This will be used later when Nested Nested Paging is
implemented.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This function pointer in the MMU context is required to
implement Nested Nested Paging.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch introduces a special set_tdp_cr3 function pointer
in kvm_x86_ops which is only used for tpd enabled mmu
contexts. This allows to remove some hacks from svm code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is necessary to implement Nested Nested Paging. As a
side effect this allows some cleanups in the SVM nested
paging code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch changes the tdp_enabled flag from its global
meaning to the mmu-context and renames it to direct_map
there. This is necessary for Nested SVM with emulation of
Nested Paging where we need an extra MMU context to shadow
the Nested Nested Page Table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes 32 bit legacy paging with NPT enabled. The
mmu_check_root call on the top-level of the loop causes
root_gfn to take values (in the tdp_enabled path) which are
outside of guest memory. So the mmu_check_root call fails at
some point in the loop interation causing the guest to
tiple-fault.
This patch changes the mmu_check_root calls to the places
where they are really necessary. As a side-effect it
introduces a check for the root of a pae page table too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a r/w module parameter named 'mmu_audit', it can control audit
enable/disable:
enable:
echo 1 > /sys/module/kvm/parameters/mmu_audit
disable:
echo 0 > /sys/module/kvm/parameters/mmu_audit
This patch not change the logic
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Nothing is checked in count_rmaps(), so remove it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).
This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()
And it adds 'notrap' ptes check in unsync/direct sps
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The audit code reports some sp not write protected in current code, it's just the
bug in audit_write_protection(), since:
- the invalid sp not need write protected
- using uninitialize local variable('gfn')
- call kvm_mmu_audit() out of mmu_lock's protection
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The read-only spte also has reverse mapping, so fix the code to check them,
also modify the function name to fit its doing
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
fix:
arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access
If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Latest kvm mmu_shrink code rework makes kernel changes kvm->arch.n_used_mmu_pages/
kvm->arch.n_max_mmu_pages at kvm_mmu_free_page/kvm_mmu_alloc_page, which is called
by kvm_mmu_commit_zap_page. So the kvm->arch.n_used_mmu_pages or
kvm_mmu_available_pages(vcpu->kvm) is unchanged after kvm_mmu_prepare_zap_page(),
This caused kvm_mmu_change_mmu_pages/__kvm_mmu_free_some_pages loops forever.
Moving kvm_mmu_commit_zap_page would make the while loop performs as normal.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Tested-by: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Of slab shrinkers, the VM code says:
* Note that 'shrink' will be passed nr_to_scan == 0 when the VM is
* querying the cache size, so a fastpath for that case is appropriate.
and it *means* it. Look at how it calls the shrinkers:
nr_before = (*shrinker->shrink)(0, gfp_mask);
shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
So, if you do anything stupid in your shrinker, the VM will doubly
punish you.
The mmu_shrink() function takes the global kvm_lock, then acquires
every VM's kvm->mmu_lock in sequence. If we have 100 VMs, then
we're going to take 101 locks. We do it twice, so each call takes
202 locks. If we're under memory pressure, we can have each cpu
trying to do this. It can get really hairy, and we've seen lock
spinning in mmu_shrink() be the dominant entry in profiles.
This is guaranteed to optimize at least half of those lock
aquisitions away. It removes the need to take any of the locks
when simply trying to count objects.
A 'percpu_counter' can be a large object, but we only have one
of these for the entire system. There are not any better
alternatives at the moment, especially ones that handle CPU
hotplug.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Doing this makes the code much more readable. That's
borne out by the fact that this patch removes code. "used"
also happens to be the number that we need to return back to
the slab code when our shrinker gets called. Keeping this
value as opposed to free makes the next patch simpler.
So, 'struct kvm' is kzalloc()'d. 'struct kvm_arch' is a
structure member (and not a pointer) of 'struct kvm'. That
means they start out zeroed. I _think_ they get initialized
properly by kvm_mmu_change_mmu_pages(). But, that only happens
via kvm ioctls.
Another benefit of storing 'used' intead of 'free' is
that the values are consistent from the moment the structure is
allocated: no negative "used" value.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
arch.n_alloc_mmu_pages is a poor choice of name. This value truly
means, "the number of pages which _may_ be allocated". But,
reading the name, "n_alloc_mmu_pages" implies "the number of allocated
mmu pages", which is dead wrong.
It's really the high watermark, so let's give it a name to match:
nr_max_mmu_pages. This change will make the next few patches
much more obvious and easy to read.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
"free" is a poor name for this value. In this context, it means,
"the number of mmu pages which this kvm instance should be able to
allocate." But "free" implies much more that the objects are there
and ready for use. "available" is a much better description, especially
when you see how it is calculated.
In this patch, we abstract its use into a function. We'll soon
replace the function's contents by calculating the value in a
different way.
All of the reads of n_free_mmu_pages are taken care of in this
patch. The modification sites will be handled in a patch
later in the series.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Mark page dirty only when this page is really written, it's more exacter,
and also can fix dirty page marking in speculation path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce spte_has_volatile_bits() function to judge whether spte
bits will miss, it's more readable and can help us to cleanup code
later
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It's a small cleanup that using using kvm_set_pfn_accessed() instead
of mark_page_accessed()
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After commit 53383eaad08d, the '*spte' has updated before call
rmap_remove()(in most case it's 'shadow_trap_nonpresent_pte'), so
remove this information from error message
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM ended up having to put a pretty ugly wrapper around set_64bit()
in order to get the type right. Now set_64bit() takes the expected
u64 type, and this wrapper can be cleaned up.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <4C5C4E7A.8040603@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes, atomically set spte is not needed, this patch call __xchg_spte()
more smartly
Note: if the old mapping's access bit is already set, we no need atomic operation
since the access bit is not lost
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce set_spte_track_bits() to cleanup current code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the old mapping is not present, the spte.a is not lost, so no need
atomic operation to set it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In sync-page path, if spte.writable is changed, it will lose page dirty
tracking, for example:
assume spte.writable = 0 in a unsync-page, when it's synced, it map spte
to writable(that is spte.writable = 1), later guest write spte.gfn, it means
spte.gfn is dirty, then guest changed this mapping to read-only, after it's
synced, spte.writable = 0
So, when host release the spte, it detect spte.writable = 0 and not mark page
dirty
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In current code, if ept is enabled(shadow_accessed_mask = 0), the page
accessed tracking is lost.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the speculative path, we should check guest pte's reserved bits just as
the real processor does
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The index wasn't calculated correctly (off by one) for huge spte so KVM guest
was unstable with transparent hugepages.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a helper to verify that a direct shadow page is valid wrt the required
access permissions; drop the page if it is not valid.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To clarify spte fetching code, move large spte handling into a helper.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To avoid split accesses to 64 bit sptes on i386, use __set_spte() to link
shadow pages together.
(not technically required since shadow pages are __GFP_KERNEL, so upper 32
bits are always clear)
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To simplify the process of fetching an spte, add a helper that links
a shadow page to an spte.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
__set_spte() will happily replace an spte with the accessed bit set with
one that has the accessed bit clear. Add a helper update_spte() which checks
for this condition and updates the page flag if needed.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.
Fix by using an exchange operation to atmoically fetch the spte and drop it.
Signed-off-by: Avi Kivity <avi@redhat.com>
When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte. Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.
The operation is still nonatomic at this point.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.
But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:
Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......
Fixed by directly return if the root is not ready.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we sync many unsync sp at one time(in mmu_sync_children()),
we may mapping the spte writable, it's dangerous, if one unsync
sp's mapping gfn is another unsync page's gfn.
For example:
SP1.pte[0] = P
SP2.gfn's pfn = P
[SP1.pte[0] = SP2.gfn's pfn]
First, we write protected SP1 and SP2, but SP1 and SP2 are still the
unsync sp.
Then, sync SP1 first, it will detect SP1.pte[0].gfn only has one unsync-sp,
that is SP2, so it will mapping it writable, but we plan to sync SP2 soon,
at this point, the SP2->unsync is not reliable since later we sync SP2 but
SP2->gfn is already writable.
So the final result is: SP2 is the sync page but SP2.gfn is writable.
This bug will corrupt guest's page table, fixed by mark read-only mapping
if the mapped gfn has shadow pages.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As advertised in feature-removal-schedule.txt. Equivalent support is provided
by overlapping memory regions.
Signed-off-by: Avi Kivity <avi@redhat.com>
While we mark the parent's unsync_child_bitmap, if the parent is already
unsynced, it no need walk it's parent, it can reduce some unnecessary
workload
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In current code, some page's unsync_child_bitmap is not cleared completely
in mmu_sync_children(), for example, if two PDPEs shard one PDT, one of
PDPE's unsync_child_bitmap is not cleared.
Currently, it not harm anything just little overload, but it's the prepare
work for the later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the sync-sp just sync transient, don't mark its pte notrap
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The sync page is already write protected in mmu_sync_children(), don't
write protected it again
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.
Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
delay local tlb flush until enter guest moden, it can reduce vpid flush
frequency and reduce remote tlb flush IPI(if KVM_REQ_TLB_FLUSH bit is
already set, IPI is not sent)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use kvm_mmu_flush_tlb() function instead of calling
kvm_x86_ops->tlb_flush(vcpu) directly.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This remote tlb flush is no necessary since we have synced while
sp is zapped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_prepare_zap_page() and kvm_mmu_zap_page() instead of
kvm_mmu_zap_page() that can reduce remote tlb flush IPI
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the later patch, we will modify sp's zapping way like below:
kvm_mmu_prepare_zap_page A
kvm_mmu_prepare_zap_page B
kvm_mmu_prepare_zap_page C
....
kvm_mmu_commit_zap_page
[ zaped multiple sps only need to call kvm_mmu_commit_zap_page once ]
In __kvm_mmu_free_some_pages() function, the free page number is
getted form 'vcpu->kvm->arch.n_free_mmu_pages' in loop, it will
hinders us to apply kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page()
since kvm_mmu_prepare_zap_page() not free sp.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page() to
split kvm_mmu_zap_page() function, then we can:
- traverse hlist safely
- easily to gather remote tlb flush which occurs during page zapped
Those feature can be used in the later patches
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In kvm_mmu_unprotect_page(), the invalid sp can be skipped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There's no need to calculate quadrant if tdp is enabled.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In Document/kvm/mmu.txt:
gfn:
Either the guest page table containing the translations shadowed by this
page, or the base page frame for linear translations. See role.direct.
But in __direct_map(), the base gfn calculation is incorrect,
it does not calculate correctly when level=3 or 4.
Fix by using PT64_LVL_ADDR_MASK() which accounts for all levels correctly.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When sp->role.direct is set, sp->gfns does not contain any essential
information, leaf sptes reachable from this sp are for a continuous
guest physical memory range (a linear range).
So sp->gfns[i] (if it was set) equals to sp->gfn + i. (PT_PAGE_TABLE_LEVEL)
Obviously, it is not essential information, we can calculate it when need.
It means we don't need sp->gfns when sp->role.direct=1,
Thus we can save one page usage for every kvm_mmu_page.
Note:
Access to sp->gfns must be wrapped by kvm_mmu_page_get_gfn()
or kvm_mmu_page_set_gfn().
It is only exposed in FNAME(sync_page).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Allow more page become asynchronous at getting sp time, if need create new
shadow page for gfn but it not allow unsync(level > 1), we should unsync all
gfn's unsync page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In current code, shadow page can become asynchronous only if one
shadow page for a gfn, this rule is too strict, in fact, we can
let all last mapping page(i.e, it's the pte page) become unsync,
and sync them at invlpg or flush tlb time.
This patch allow more page become asynchronous at gfn mapping time
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong